B.E.G. STILL EVEN BETTER!

Transcription

1 B.E.G. STILL EVEN BETTER!

2 ENERGY IS LIFE

3 For the future of our environment B.E.G. The pole caps are melting, sea levels are rising, freak storms are getting worse and increasing in frequency all as a consequence of increased CO 2 emissions. B.E.G. is aware of these changes and, with its extensive range of presence detectors, the use of energy-saving bulbs in lights and heating regulators, is helping to reduce CO 2 emissions and protect resources. Saving energy with B.E.G. also means cost reduction and environmental protection. For an environment worth living in!

4 RoHS LIGHT IS LIFE

5 Energy savings = cost reduction + environmental protection B.E.G. Light is essential to life, it s both a source of energy and the elixir of everything living. Energy is precious which is why saving it, also means protecting the climate and environment and conserving resources to save the place in which we live. With the aim of satisfying demands for a clean environment, B.E.G. has developed products that contribute to optimum light and heat management in accordance with requirements and that comply with the latest environmental-protection guidelines and directives issued by the European Union. For the future of our children! Example of B.E.G. energy and environment balance sheets Automatic lamps AL1, AL4, MD6 Mode / bulb 60W bulb Savings AL20, ALC-B, AL2 Mode / bulb 100W bulb Savings Without MD With MD Without MD With MD Consumption in kwh / year with an average life span of 8000 h CO 2 emission reductions / year Also available trees for CO 2 reduction Costs per year at 0.15 / kwh 175 kwh 22 kwh 153 kwh 77 kg* x 3** Consumption in kwh / year with an average life span of 8000 h CO 2 emission reductions / year Also available trees for CO 2 reduction Costs per year at 0.15 / kwh 292 kwh 37 kwh 256 kwh 128 kg* x 6** *0.5 kg CO2 for generating1 kwh with mean energy mix **1 tree absorbs around 20 kg CO 2 / year without MD (movement detector) = permanent light (mean total of the time lamps are switched on approx. 8 h in 24 h) with MD = light only on with movement (mean total of the time lamps are switched on approx. 1 h in 24 h)

6 The premium class LUXOMAT RC-plus next The middle of the range LUXOMAT LC-plus The low-cost version LUXOMAT LC-Click LIGHT WORKS The action product LUXOMAT LC-Mini

7 Intelligent home light by movement... but only when it s needed B.E.G. B.E.G. s outdoor movement detectors with up-todate PIR technology operate by detecting moving sources of heat using infrared technology and by activating or deactivating lamps depending on ambient light conditions. They are preferably used for outdoor lamps on houses and are thus particularly good for saving energy, reducing costs and providing maximum security. The new remotely controlled LUXOMAT RC-plus next with its modern sensors and dynamic followup time adjustment in particular sets standards for motion detection. For maximum safety and comfort!

8 LIGHT THROUGH PRESENCE Switching with PD one or two channels Switching with the PD- Master one or two channels Switching with the PD-Master-DUO two channels Dimming with the PD- Master one or two channels

9 For safety, comfort and saving energy B.E.G. Both in the management of light as well as in building control tasks, presence detectors can contribute to achieving considerable energy savings: presence detectors switch on lamps, heating and ventilation only when they are actually needed. They also incorporate the available daylight into the general lighting and thus also utilize natural resources. Presence detectors are motion sensors with a detection angle of 360 that have been designed for installation in ceilings and indoor use and that regulate overall brightness by measuring different sources of light (natural or artificial). B.E.G. s range includes presence detectors for all applications and for all special requirements. For more energy efficiency in buildings!

10 LIGHT INDOORS Special 24 V solution LON-BUS KNX/EIB-BUS DALI/DSI-BUS

11 Also protecting resources with BUS systems B.E.G. Modes may be selected by remote control: B.E.G. s range includes presence detectors for all BUS applications: DALI, DSI, KNX/EIB, LON and special 24 V solutions. The new digital detectors (PD2, PD4 and PD9), successors to the analogue presence detectors with dimming function, permit users to control both DSI and DALI electronic ballast systems. Four different modes are available with the KNX/EIB versions: normal mode (switching), semi- or fully-automatic mode with constant light control (dimming), slave mode and alarm function. LON versions have more than seven device functions. Besides the sensor, KNX/ EIB and LON presence detectors also possess corresponding BUS connectors. The required software is also included while it may also be simply downloaded from B.E.G. s homepage at For individuality and quality!

12 Setting the sights on light

13 Individual variety timeless design B.E.G. This combination of movement detector and sound detector (Indoor 180-R/T/TR) is innovative and unique. The LUXOMAT Indoor 180 automatic light switch saves energy by switching lamps on or off as required both in private as well as commercial properties. Staircases, corridors, entrance areas, kitchens and bathrooms in apartments, family homes, bars and restaurants, hotels, offices and hospitals are ideal locations for this product. In the IP54 version, the LUXOMAT Indoor 180 may also be used in damp areas, e.g. cellar staircases and garages. The switch combination prevents lamps from being activated by external noises. The integrated twilight switch allows operational readiness to be set individually. For personal demands and all tastes! LUXOMAT Indoor 180-R relay version with three-wire engineering LUXOMAT Indoor 180-T triac version in twowire engineering LUXOMAT Indoor 180-TR for controlling automatic staircase lighting LUXOMAT Indoor 180-M/-S Master and Slave version

14 LIGHT WITH FUTURE 1975

15 A company with more than 30 years of tradition B.E.G. B.E.G. Brück Electronic GmbH was established over 30 years ago in The business commenced with the development and production of emergency lighting. Motion detectors were included in the production programme in Other product families, e.g. VIDEOLUX and LUXOMAT ECOLIGHT, were also developed to broaden the range. The growth in automated systems and the resulting control processes in buildings where people are monitored has resulted in a greater demand for systems that are able to detect the presence of people. In 2006, B.E.G. re-assumed responsibility for handling the sales of its entire production range from its previous sales partner with the aim of re-establishing close ties with its customers. The new sales and logistics centre with adjacent production and development department in Lindlar was taken into operation in Today, B.E.G. enjoys an excellent reputation throughout Germany and internationally and operates branches and agencies in many countries all over the world

16 WITH AN EYE TO THE FUTURE

17 Quality with system in your building B.E.G. This year, the company was re-certified in accordance with ISO 9001:2008.This means that all B.E.G. s operations follow a standard quality management system. The top priority here is customer satisfaction. Our staff work continuously to ensure these high standards of quality and to eliminate any possible problems. The reliability, fitness for purpose, electromagnetic compatibility (EMC) and safety of our products is ensured through cooperation with independent testing bodies. For optimum customer satisfaction!

18 WE ARE GLAD TO HELP B.E.G. Brück Electronic GmbH Schlosserstr. 30 D Lindlar Phone: (0049) Fax: (0049) Internet: B.E.G. France EUROPARC 9/11 Rue Eugène Dupuis F Creteil Phone: (0033) Fax: (0033) Internet: B.E.G. Belgique Kupferstr. 45 B-4750 Elsenborn Phone: (0032) Fax: (0032) Internet: B.E.G. (UK) Ltd. Q West, Great West Road Brentford, Middlesex TW8 0GP Phone: (0044) Fax: (0044) info@beguk.co.uk Internet:

19 Wir beraten Sie gerne! B.E.G. The high demands we make on the quality of our products are also applied to the provision of customer care after the purchase has been made. To this end, we offer extensive after-sales services. Our highly qualified workforce will provide competent support in any questions relating to applications, re-setting and warranties. Our sales force will help you in the planning of projects and will keep you up to date about new products by B.E.G. We have qualified technicians who will be glad to help you on the phone or even at site. For safety, comfort and energy savings! Phone GB Phone D

20 B.E.G. Brück Electronic GmbH Schlosserstr. 30 D Lindlar Phone: (0049) Fax: (0049) Internet: B.E.G. (UK) Ltd. Q West, Great West Road Brentford, Middlesex TW8 0GP Phone: (0044) Fax: (0044) info@beguk.co.uk Internet: