ΜΕΡΟΣ Ι Κανονιστικές Διοικητικές Πράξεις
|
|
- Alberta Gregory
- 6 years ago
- Views:
Transcription
1 Κ.Δ.Π. 657/2004 ΠΑΡΑΡΤΗΜΑ ΤΡΙΤΟ ΤΗΣ ΕΠΙΣΗΜΗΣ ΕΦΗΜΕΡΙΔΑΣ ΤΗΣ ΔΗΜΟΚΡΑΤΙΑΣ Αρ της 16ης ΙΟΥΛΙΟΥ 2004 ΔΙΟΙΚΗΤΙΚΕΣ ΠΡΑΞΕΙΣ ΜΕΡΟΣ Ι Κανονιστικές Διοικητικές Πράξεις Αριθμός 657 Ο ΠΕΡΙ ΤΥΠΟΠΟΙΗΣΗΣ, ΔΙΑΠΙΣΤΕΥΣΗΣ ΚΑΙ ΤΕΧΝΙΚΗΣ ΠΛΗΡΟΦΟΡΗΣΗΣ ΝΟΜΟΣ ΤΟΥ 2002 Γνωστοποίηση βάσει του Άρθρου 5(Ύ) του Νόμου 156(Τ)/2002 Με το παρόν γνωστοποιείται ότι με βάσει το Άρθρο 5(γ) του Νόμου 156(Ι)/2002, περί Τυποποίησης, Διαπίστευσης και Τεχνικής Πληροφόρησης, Ο Κυπριακός Οργανισμός Προώθησης Ποιότητας υιοθέτησε και εξέδωσε ως Κυπριακά Πρότυπα τα πιο κάτω Ευρωπαϊκά Πρότυπα: (6503)
2 6504 (Γΐ GERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMTATION CYSDocument: CYSISO7490:2000 CYSISO/TR11610: 2004 CYS :1988 CYS :2004 CYS25967:1989 CYS25968:1989 CYSISO3766:2003 Title Dental gypsum-bonded casting investments Protective clothing Vocabulary Acoustics Statistical methods for determining and verifying stated noise emission values of machinery and equipment Part 1: General considerations and definitions Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 1: Terms and definitions Taps and thread cutting: Nomenclature of the main types and terminology Circular screwing dies - Terminology Construction drawings Simplified representation of concrete reinforcement ICS :1992 = 814-1:1997. CYS 255-1:1997. CYS 12055:1998 = ISO 3766:1999 =
3 6505 I 11 HELTH CARE TECHNOLOGY CYSDocument: CYSISO7376:2003- CYSIS016408:200 4 CYSISO6360-1:2004 CYS14136:2004 Title '...".'." Anaesthetic and respiratory equipment Laryngoscopes for tracheal intubation Dentistry Oral hygiene products Oral rinses Dentistry Number coding system for rotary instruments Part 1: General characteristics Use of external quality assessment schemes in the assessment of the performance of in vitro diagnostic examination procedures ICS ISO 7376:2003 =
4 6506 VIRONMT AND HEALTH PROTECTION. SAFETY CYSDocument: CYS13439:2003 CYS 13440:2003 CYS60335-T:2002- iss2 CYS :1995- CYS :1995- iss1 CYSISO9038:2003 CYS :1991 CYS :1991 CYS :1991 CYS :1991 CYSIS :2004 CYS :2004 CYS :1993 CYS13287:2004 Title Packaging Rate of energy recovery Definition and method of calculation Packaging Rate of recycling Definition and method of calculation Household and similar electrical appliances Safety Part 1: General requirements Hand-held portable power tools Measurement of vibrations at the handle Part 2: Chipping hammers and riveting hammers Hand-held portable power tools Measurement of vibrations at the handle Part 3: Rock drills and rotary hammers Service diagnostic interface for consumer electronics products and networks Implementation for IEEE 1394 Explosion protection systems Part 1: Determination of explosion indices of combustible dusts in air Explosion protection systems Part 2: Determination of explosion indices of combustible gases in air Explosion protection systems Part 3: Determination of explosion indices of fuel/air mixtures other than dust/air and gas/air mixtures Explosion protection systems Part 4: Determination of efficacy of explosion suppression systems Safety devices for protection against excessive pressure Part 1: Safety valves Protective clothing Electrostatic properties Part 3: Test methods for measurement of charge decay Acoustics Hearing protectors Part 3: Simplified method for the measurement of insertion loss of ear-muff type protectors for quality inspection purposes Personal protective equipment Footwear Test method for slip resistance ICS1 : :2002-iss1 = :1995 = :1995 = V 13287:2002 =
5 6507 CYSDocument: CYSISO CYS27917:1991 CYS :1988 CYS :1988 CYS :1988 CYS CYS61006:2004 Title. ' METROLOGY AND MEASUREMT. PHYSICAL PHOMA Hydrometric determinations Cableway systems for stream gauging Acoustics Measurement at the operator's position pf airborne noise emitted by brush saws Acoustics Statistical methods for determining and verifying stated noise emission values of machinery and equipment Part 2: Methods for stated values for individual machines Acoustics Statistical methods for determining and verifying stated noise emission values of machinery and equipment Part 3: Simple (transition) method for stated values for batches of machines Acoustics Statistical methods for determining and verifying stated noise emission values of machinery and equipment Part 4: Methods of stated values for batches of machines Sound system equipment: Headphones and earphones associated with portable audio equipment Maximum sound pressure level measurement methodology and limit considerations Part 2: Matching of sets with headphones if either or both are offered separately Electrical insulating materials Methods of test for the determination of the glass transition temperature icsi :1993 =
6 TESTING I CYSDocumerit:) Η CYS583-1:1999- Tife;'. V : V,V-'',:;- : ''-V : "' : ' '^V^,.' Non-destructive testing Ultrasonic examination Part 1: General principles ν/'' icsi ; :1999 =
7 6509 FLUID SYSTEMS AND COMPONTS FOR GERAL USE CYSDocument: CYS :2002- CYS :2002- CYS :2002- CYS :2002- CYS :2002- CYS :2002- CYSIS015465:200^ CYSl'514-7:2004 CYS :2004 CYS1074-2:2000- CYS :2004 CYS :2004 Title Unfired pressure vessels Part 6: Requirements for the design and fabrication of pressure vessels and pressure parts constructed from spheroidal graphite cast iron Cryogenic vessels Large transportable vac Seamless steel tubes for pressure purposes Technical delivery conditions Part 1: Non-alloy steel tubes with specified room temperature properties Seamless steel tubes for pressure purposes Technical delivery conditions Part 2: Non-alloy and alloy steel tubes with specified elevated temperature properties Seamless steel tubes for pressure purposes Technical delivery conditions Part 3: Alloy fine grain steel tubes Seamless steel tubes for pressure purposes Technical delivery conditions Part 4: Non-alloy and alloy steel tubes with specified low temperature properties Pipework Stripwound metal hoses and hose assemblies Flanges and their joints Gaskets for PNdesignated flanges Part 7: Covered metal jacketed gaskets for use with steel flanges Industrial process control systems Part 2: Methods of evaluating the performance of intelligent valve positioners with pneumatic outputs Valves for water supply Fitness for purpose requirements and appropriate verification tests Part 2: Isolating valves Industrial-process control valves Part 5: Marking Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 2: Test conditions ICS :2002 = :2002 = :2002 = :2002 = :2002 = :2002 = :2000 = 255-2:1997. CYS 814-2:1997. CYS 12055:1998 =
8 6510 CYS :2004 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 3: Test methods :1997. CYS 814-2:1997. CYS 12055:1998 = CYS :2004 CYS :2000-iss1 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling Part 4: Requirements Safety of household and similar electrical appliances Part 2-34: Particular requirements for motor-compressors :1997. CYS814-3:1997. CYS 12055:1998 = :2000 =
9 MANUFACTURING GINEERING I CYSDocument: CYSISO9409-1:2004 CYS CYS :2004 CYS1291:1998- iss2 CYS1713:1998- iss2 Title-, Manipulating industrial robots Mechanical interfaces Part 1: Plates Electrical and pneumatic analogue chart recorders for use in industrial process control systems Part 2: Guidance for inspection and routine testing Industrial-process control systems Instruments with analogue inputs and two- or multi-state outputs Part 1: Methods of evaluating performance Non-destructive testing of welds Magnetic particle testing of welds Acceptance levels Non-destructive testing of welds Ultrasonic testing Characterization of indications in welds icsi ISO :1997 = :1993 = 1291:1998- = 1713:1998- =
10 ELECTRICAL GINEERING CYS Document: CYS50160:2000- iss2 CYS60447:2004 CYS :2000-iss1 CYS :2004 CYS :1995-iss1 CYS :2004 CYS :2004 CYS :2004 Title' ; ' : Voltage characteristics of electricity supplied by public distribution systems Basic and safety principles for man-machine interface, marking and identification Actuating principles Insulating and sheathing materials of electric and optical fibre cables Common test methods Part 5-1: Methods specific to filling compounds Drop point Separation of oil Lower temperature brittleness Total acid number Absence of corrosive Insulating materials Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 1: Definitions, designations and general requirements Insulating and sheathing materials of electric cables Common test methods Part 3: Methods specific to PVC compounds Section 2: Loss of mass test Thermal stability test Coatings for loaded printed wire boards (conformal coatings) Part 1: Definitions, classification and general requirements Coatings for loaded printed wire boards (conformal coatings) Part 2: Methods of test Coatings for loaded printed wire boards (conformal coatings) Part 3-1: Specifications for individual materials Coatings for general purpose (Class 1). high reliability (class 2) and aerospace (Class 3)!psi :2000- = 60447:1994 = δ- Ι :2000= :1995 = :1995 = :1995 = :1995 = :1995 = CYS :2004 Insulating materials Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes Part 2: Methods of test CYS :1996-iss1 Packaging of winding wires Part 2-2: Cylindrical barrelled delivery spools Specification for returnable spools made from thermoplastic material :1996 =
11 CYS :1996-iss1 CYS :1996-iss1 CYS :1996-iss1 CYS :1998- CYS :2004 CYS :2004 CYS :2004 CYS :2003 CYS :1991- CYS :2004 CYS : Packaging of winding wires Part 2-3: Cylindrical barrelled delivery spools" Specification for non-returnable spools made from thermoplastic material Packaging of winding wires Part 3-3: Taper barrelled delivery spools Specification for non-returnable spools made from thermoplastic material Packaging of winding wires Part 4-2: Methods of test Containers made from thermoplastic material for taper barrelled delivery spools Winding wires Test methods Part 6: Thermal properties Conduit systems for cable management Part 21: Particular requirements Rigid conduit systems Conduit systems for cable management -=- Part 22: Particular requirements Pliable conduit systems Conduit systems for cable management Part 23: Particular requirements Flexible conduit systems Plugs, socket-outlets, vehicle couplers and vehicle "inlets Conductive charging of electric vehicles Part 1: Charging of electric vehicles up to 250 A a.c. and 400 A d.c. Low-voltage switchgear and controlgear assemblies Part 4: Particular requirements for assemblies for construction sites (ACS) Electromechanical elementary relays Part 1: General and safety requirements High-voltage switchgear and controlgear Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kv :1996 = :1996 = :1995 = :1998 = :1996-iss1 = 30/06/ :1996-iss1 = :1996-iss1 = :1991 = 61 βιο- ^Ι 999+ CYS :1999 = :1997 = \
12 6514 CYS :1999-iss1 CYS50300:2004 CYS :2002- CYS :1998-iss1 CYS :2001-iss1 CYS :2003-iss1 CYS :1998- iss2 CYS :2003-iss1 CYS :2004 CYS :2004-iss1 Low-voltage switchgear and controlgear Part 5-2: Control circuit devices and switching elements Proximity switches Low-voltage switchgear and controlgear assemblies General requirements for lowvoltage substation cable distribution boards Signs and luminous-dischargetube installations operating from a no-load rated output voltage exceeding 1 kv but not exceeding 10 kv Part 1: General requirements Safety of power transformers, power supply units and similar Part 2-2: Particular requirements for control transformers Safety of power transformers, power supply units and similar devices Part 2-23: Particular requirements for transformers for construction sites Safety of power transformers, power supply units and similar products Part 2-9: Particular requirements for transformers for class III handlamps for tungsten filament lamps Safety of power transformers, power supply units and similar Part 1: General requirements Uninterruptible power systems (UPS) Part 1-1: General and safety requirements for UPS used in operator access areas Electrical apparatus for potentially explosive atmospheres Group I Intrinsically safe systems Part 1: Construction and testing Electrical apparatus for explosive gas atmospheres Part 18: Construction, test and marking of type of protection encapsulation "m" electrical apparatus :1999 = :2002 = :1998 = ΕΝ61558τ2-23:2001 = :2003 = :1998-iss1 = :2003 =. S/S CYS :1997 = :2004 =
13 6515 I 31 ELECTRONICS j CYSDocument: CYS :2002- CYS :1998- iss2 CYS :2004 CYS :1994- iss2 Title Standard data element types with associated classification scheme for electric components Part 1: Definitions Principles and methods Quartz crystal controlled oscillators of assessed quality Part 1: Generic specification Safety of laser products Part 12: Safety of free space optical communication systems used for transmission of information Safety of laser products Part 1: Equipment classification, requirements and user's guide : ICS1 \ :2002 = :1998-iss1 = :1994-iss1 =
14 6516 TELECOMMUNICATIONS. AUDIO AND VIDEO GINEERING CYSDqcurhent:.". Title '. ' ": '<>. ' CYS :2003 CYS :2004 CYS :2004 CYS :2004 CYS :2004 CYS :2004 CYS :2004 CYS :2004 CYS :2004 Information technology Cabling installation Part 3: Installation planning and practices outside buildings Helical-scan digital video cassette recording system using mm (0.5 in) magnetic tape Format HD-D5 Part 1: VTR specifications Helical-scan digital video cassette recording system using mm (0.5 in) magnetic tape Format HD-D5 Part 2: Compression format Helical-scan digital video cassette recording system using mm (0.5 in) magnetic tape Format HD-D5 Part 3: Data stream format Sound system equipment Part 4: Microphones Transmission of audio and/or video and related signals using infrared radiation Part 8-1: Digital audio and related signals Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 9-2: Type MT-RJ terminated on IEC category B1.1 singlemode fibre Fibre optic interconnecting devices and passive components performance standard Part 053-3: Continuously variable attenuators for category U Uncontrolled environment Fibre optic active components and devices Package and interface standards Part 12: Laser transmitters with coaxial RF connector icsi ; Partially S/S CYS :1997
15 6517 INFORMATION TECHNOLOGY. OFFICE MACHINES CYSDocumeht: CYS29295:1991 CYS62286:2004 Title';. ;ν.-= : ; :'';';, ;ν. _;-; ; V^^^-jw, ICS1 Acoustics Measurement of high-frequency noise emitted by computer and business equipment Service diagnostic interface for consumer electronics products and networks Implementation for IEEE
16 IMAGE TECHNOLOGY CYSDocument: Title;, : -.'-v-=-v^;:.v,. - ; :. ::?.:. Photography Medical radiographic cassettes/screens/films and hard-copy CYSISO4090:2004 imaging films Dimensions and specifications ICS1 :::'
17 RAILWAY GINEERING CVSbocument: ; CYS60310:2004 Title. \:--y : : /' -'; ICS1 Railway applications Traction transformers and inductors on board rolling stock :1997 =
18 6520 SHIPBUILDING AND MARINE STRUCTURES,,..Γ:-" CYSDocurrient: Title ^ i '; : '.'----. CYSISO14945:200 4 Small craft Builder's plate ICS
19 6521 AIRCRAST AND SPACE VEHICLE GINEERING CYSDocument: CYS14165:2004 Title ; " : :':'- \-.": /:": "'' '' ICS1 Space engineering standards Fracture control 49.14
20 TEXTILE AND LEATHER TECHNOLOGY CYSDocument: CYSIS015797:200 4 CYSISO105- B06:2004 CYSISO105- C06:1997-iss1 CYSISO105- C CYSISO105- E05:1997-iss1 Title Textiles - Industrial washing and finishing procedures for testing of workwear Textiles Tests for colour fastness Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc ading lamp test Textiles Tests for colour fastness Part C06: Colour fastness to domestic and commercial laundering Textiles Tests for colour fastness Part C09: Colour fastness to domestic and commercial laundering Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach activator Textiles Tests for colour fastness Part E05: Colour fastness to spotting: Acid ICS ISO 105 C06:1997 = ISO 105 E05:1997 = CYSISO105- E06:1997 CYSISO105- E07:1997-iss1 CYSISO105- E09:1997 CYSISO105- E01:1996-iss1 CYSISO105- E02:1996-iss1 Textiles Tests for colour fastness Part E06: Colour fastness to spotting: Alkali Textiles Tests for colour fastness Part E07: Colour fastness to spotting: Water Textiles Tests for colour fastness Part E09: Colour fastness to potting Textiles Tests for colour fastness Part E01: Colour fastness to water Textiles Tests for colour fastness Part E02: Colour fastness to sea water ISO 105- E06:1997 = ISO 105 E07:1997 = ISO 105 E09:1997 = ISO 105 E01:1996 = ISO 105 E02:1996 =
21 6523 CYSISO105- E04:1996-iss1 CYSIS :2004 CYSIS :2004 CYS :2004 CYS14414:2004 CYS Textiles Tests for colour fastness Part E04: Colour fastness to perspiration Textiles Determination of the slippage resistance of yarns at a seam in woven fabrics Part 1: Fixed seam opening method Textiles Determination of the slippage resistance of yarns at a seam in woven fabrics Part 2: Fixed load method Electrostatics Part 4-1: Standard test methods for specific applications Electrical resistance of floor coverings and installed floors Geosynthetics Screening test method for determining chemical resistance for landfill applications Geosynthetic barriers Test method for determining the resistance to leaching ISO 105 E04:1996 =
22 6524 I 61 CLOTHING INDUSTRY CySDocument: Title. ICS1 CYS13400:2002- CYS13511:2002- iss! CYS13513:2002- iss1 CYS13571:2002- iss1 CYS13516:2002- Footwear Sampling location, preparation and duration of conditioning of samples and test pieces Footwear Test methods for uppers Resistance to damage on lasting Footwear Test methods for uppers Deform ability Footwear Test methods for uppers, lining and insocks Tear strength Footwear Test methods for uppers, lining and insocks Colour fastness to rubbing :2002 = :2002 = 13513:2002 = 13571:2002 = 13516:2002 =
23 FOOD TECHNOLOGY CYSDocurneht: Title"' ' = '" ; "'-/Γ''' ::ί '- ICS1 CYS601:2004 Aluminium and aluminium alloys Castings Chemical composition of castings for use in contact with foodstuff :1995 = CYS602:2004 Aluminium and aluminium alloys Wrought products Chemical composition of semifinished products used for the fabrication of articles for use in contact with foodstuff :1995 =
24 CHEMICAL TECHNOLOGY CYSDocumerit: Title ICS1 CYS :2004 Explosives for civil uses Detonating cords and safety fuses Part 9: Determination of transmission of detonation from detonating cord to detonating cord CYS :2004 CYS :2004 CYS :2004 CYS :2004 Explosives for civil uses Detonators and relays Part 1: Requirements Explosives for civil uses - Detonators and relays - Part 13: Determination of resistance of electric detonators to electrostatic discharge Explosives for civil uses Detonators and relays Part 25: Determination of transfer capability of surface connectors, relays and coupling accessories Explosives for civil uses Propellants and rocket propellants Part 6: Solid rocket propellants Guide for the determination of integrity of inhibitor coatings ,
25 6527 I 73 MINING AND MINERALS CYSDocument: Title ' ' '.. icsi ; CYS13755:2002- Natural stone test methods Determination of water absorption at atmospheric pressure :2002 =
26 6528 PETROLEUM AND RELATED TECHNOLOGIES CYSDocument: CYSIS03170:2004- CYSIS03171:1999- CYSISO3679:2004 CYSISO20843:200 3 CYS 13614:2004 CYS14214:2003- Title Petroleum liquids Manual sampling Petroleum liquids Automatic pipeline sampling Methods of test for petroleum and its products BS : Determination of flash point Rapid equilibrium closed cup method (Identical with IP ) Petroleum and related products Determination of ph of fire-resistant fluids within categories HFAE. HFAS and HFC Methods of test for petroleum and its products BS : Bitumen and bituminous binders Determination of adhesivity of bitumen emulsions by water immersion test Aggregate method Automotive fuels Fatty acid methyl esters (FAME) for diesel engines Requirements and test methods JCS ISO 3170:2004 = ISO 3171:1999 = 456:1991 = 14214:2003 =
27 WOOD TECHNOLOGY CYSDocument: CYS14322:2004 CYS14323:2004 CYS326-3:2003 CYS13990:2004 Title...:';' Wood-based panels Melamine faced boards for interior uses Definition, requirements and classification Wood-based panels Melamine faced boards for interior uses Test methods Wood-based panels - Sampling, cutting and inspection - Part 3: Inspection of an isolated lot of panels Wood flooring - Solid softwood floor boards ICS :1998 =
28 RUBBER AND PLASTICS INDUSTRIES CYSDocument: CYS :2004 CYS :2004 CYS :2004 CYS :2004 CYSISO14130:199 8-iss1 CYS201:1997 CYS 13418:2004 Title Pigments and extenders Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) Part 2: Preparation of test specimens Pigments and extenders Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) Part 3: Determination of the relative tinting strength of white pigments Pigments and extenders Testing of colouring materials in plasticized polyvinyl chloride (PVC-P) Part 4: Determination of bleeding of colouring materials Pigments and extenders Methods of dispersion and assessment of dispersibility in plastics Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by two-roll milling Fibre-reinforced plastic composites Determination of apparent interlaminar shear strength by short-beam method Rubber and plastics machines Injection moulding machines Safety requirements Rubber and plastics machines Winding machines for film or sheet Safety requirements ICS :2003 =
29 PAPER TECHNOLOGY CYSDocurnent: Title'..;; ' ' { : :/ '.:"y : ' v; ': icsi,v ;;:;; CYS20638:1993 Pulps Determination of dry matter content 85.04
30 PAINT AND COLOUR INDUSTRIES CYSDocument: titled ^;K:- ;-ΐ :;. ' ;.'..* icst CYS1062-7:2004 Paints and varnishes Coating materials and coating systems for exterior masonry and concrete Part 7: Determination of crack bridging properties 87.04
31 6533 CONSTRUCTION MATERIALS AND BUILDING CYSDocument: CYS CYS14411:2003 CYS CYS13872:2004- CYS1596:1998- CYSC/TS :2004 CYSC/TS :2004 CYSC/TS :2004 CYSC/TS :2004 CYSC/TS :2004 CYSC/TS :2004 CYSC/TS :2004 CYSC/TS :2004 CYSC/TS :2004 Title. Ceramic tiles Determination of frost resistance Ceramic tiles Definitions, classification, characteristics and marking Concrete Part 1: Specification, performance, production and conformity Method of test for smoothing and/or levelling compounds Determination of shrinkage Specification for dedicated liquefied petroleum gas appliances Mobile and portable non-domestic forced convection direct fired air heaters Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 1: Requirements common to all types of fittings Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 10: Arm balancing systems Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 11: Top hung projecting reversible hardware Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 12: Side-hung projecting reversible hardware Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 13: Sash balances Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 14: Sash fasteners Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 15: Rollers Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 16: Fittings for lift and slide systems Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 17: Fittings for tilt and slide systems ICS :2000 = 13872:2004 = 1596:1998 =
32 6534 CYSC/TS :2004 CYSC/TS :2004 CYSC/TS :2004 CYSC/TS :2004 CYSCn"S :2004 CYSC/TS :2004 CYSC/TS :2004 CYSC/TS :2004 Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 2: Casement fastener handles Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 3: Manoeuvring fittings for espagnolette bolts/sliding button Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 4: Espagnolette bolts Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 5: Devices that restrict the opening of windows Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 6: Variable geometry stay hinges (with or without a friction system) Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 7: Finger catches Building hardware, fittings for windows and door height windows - Requirements and test procedures - Part 8: Tilt & turn. Tilt-First and Turn-Only hardware Building hardware, fittings for windows and door height windows - Requirements and test methods - Part 9: Pivot hinges
33 6535 I 93 CIVIL GINEERING "1 CYSDocument: CYS40-2:1976 Title Λ ν-. :.ν :; 'ΐ : ::. :,' Ί:^.-χ'-; Lighting columns - Part 2: Dimensions and tolerances ICSl:; ; v^
34 6536 DOMESTIC AND COMMERCIAL EQUIPMT. TERTAINMT. SPORTS CYSDbcument:^ CYS203-2:1995 CYS30-1-1:1998 CYS :2002-iss1 CYS1466:2004 CYS71-1:2001-iss2 CYS :2001- CYS :2003 CYS :2002 Title^;:v^. ν ί;!^ ;n ; ^r. ; ';'.)-1 χ; Gas heated catering equipment Part 2: Rational use of energy Domestic cooking appliances burning gas fuel Part 1-1: Safety General Household and similar electrical appliances Safety Part 2-34: Particular requirements for motor-compressors Child care articles Carry cots and stands Safety requirements and test methods Safety of toys Part 1: Mechanical and physical properties Swimming pool quipment Part 2: Additional specific safety requirements and test methods for ladders, stepladders and handle bends Buoyant aids for swimming instruction Part 1: Safety requirements and test methods for buoyant aids to be worn Buoyant aids for swimming instruction Part 2: Safety requirements and test methods for buoyant aids to be held. :^v: ; ;:' : ;ί" \. S i/;..;;i ics/i;>, :2002 =. S/S CYS :2000 = :1998 = 71-1:2001-iss1 = :2001 =
BSOL Modules EC Directives
BSOL Modules EC Directives Module Title 90-396-EEC 94-9-EC 00-9-EC 89-106-EEC 89-339-EEC 93-15-EEC 95-16-EC 73-23-EEC Appliance Burning Equipment & Protective Cableway Installations Construction Electromagnetic
More informationIEC NORMAS PUBLICADAS. As normas ISO/IEC já estão relacionadas em normas ISO Publicadas
IEC NORMAS PUBLICADAS As normas ISO/IEC já estão relacionadas em normas ISO Publicadas IEC/TC 1 - Terminology IEC 60050-161-am5 ed1.0 (2015-02) - Amendment 5 - International Electrotechnical Vocabulary
More informationSafety Standards for Electronic Products
Safety Standards for Electronic Products The following are some of the safety standards for all types of electronic products. ANSI C95.3:1972 / Techniques & instrumentation for measurement of potentially
More informationNr. Standard reference Title 1 EN 54-28:2016. Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors
Nr. Standard reference Title 1 EN 54-28:2016 Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors 2 EN 59:2016 Glass reinforced plastics - Determination of indentation
More informationIEC/TC IEC/TC44 IEC/TC44. Amd.1DC:201. Ed.3CD:2011. Ed.2.1:2008. Amd.1CDV ED.1: 一連番号 Ed.
IEC/TC44 20-3-7 IEC/TC44 IEC/TC44 6 TC44 TC44 TC44 TC44 TC44 WD, CD, CDV TC44 一連番号 IEC 60027-:992 (Ed.) (995 corrected and reprinted) Letter symbols to be used in electrical technology Part : General 2
More informationΕ.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 30/2016 Αρ. 4926, Αριθμός 30 ΟΙ ΠΔΡΙ ΣΤΠΟΠΟΙΗΗ, ΓΙΑΠΙΣΔΤΗ ΚΑΙ ΣΔΥΝΙΚΗ ΠΛΗΡΟΦΟΡΗΗ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012
207 Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 30/2016 Αρ. 4926, 12.2.2016 Αριθμός 30 ΟΙ ΠΔΡΙ ΣΤΠΟΠΟΙΗΗ, ΓΙΑΠΙΣΔΤΗ ΚΑΙ ΣΔΥΝΙΚΗ ΠΛΗΡΟΦΟΡΗΗ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012 Γλωζηοποίεζε βάζεη ηοσ Άρζροσ 5 ηοσ Βαζηθού Νόκοσ 156(Ι)/2002
More informationEXPRESSION OF INTEREST (EOI) FOR. Fire Fighting System (FFS)
EXPRESSION OF INTEREST (EOI) FOR Fire Fighting System (FFS) KWtE-03-PR-EO-ACC-0 Rev01 11 Version: Date: Prepared by: Approved: 01 7/11/18 VMC AMN Page 1 OF 5 1 Project overview ACCIONA s Engineering, Procuring
More informationSTANDARDS FROM EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN) 01 GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION. Title ICS1 Withdrawn
418 70 70/2016 I 2012 5 (CYS) STANDARDS FROM EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN) 01 GENERALITIES. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION 736-2:2016 572-1:2012 Valves - Terminology - Part
More informationΕ.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 99/2017 Αρ. 5007, Αριθμός 99. ΟΙ ΠΔΡΙ ΣΤΠΟΠΟΙΗΗ, ΓΙΑΠΙΣΔΤΗ ΚΑΙ ΣΔΥΝΙΚΗ ΠΛΗΡΟΦΟΡΗΗ ΝΟΜΟI ΣΟΤ 2002 έως 2012
1056 Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 99/2017 Αρ. 5007, 7.4.2017 Αριθμός 99 ΟΙ ΠΔΡΙ ΣΤΠΟΠΟΙΗΗ, ΓΙΑΠΙΣΔΤΗ ΚΑΙ ΣΔΥΝΙΚΗ ΠΛΗΡΟΦΟΡΗΗ ΝΟΜΟI ΣΟΤ 2002 έως 2012 Γλωζηοποίεζε βάζεη ηοσ άρζροσ 5 ηοσ Βαζηθού Νόκοσ 156(Ι) ηοσ
More information(Notices) EUROPEAN COMMISSION
14.8.2012 Official Journal of the European Union C 245/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework
More informationรายช อเอกสารใหม (มกราคม-ม นาคม 2559)
ABSORPTION รายช อเอกสารใหม (มกราคม-ม นาคม 2559) 2812-3 2012 Paints and varnishes - Determination of resistance to liquids - P.3: Method using an absorbent medium/by International Organization for Standardization
More informationJoint Stock Company Alzida Savanorių pr. 221, LT Vilnius, Lithuania
page 1 (13) Joint Stock Company Alzida Savanorių pr. 221, LT- 02300 Vilnius, Lithuania SCOPE OF ACCREDITATION (flexible) No. Name of the testing object Name of the parameters (characteristics) to be tested
More informationΤα Διεθνή Πρότυπα που έχουν εκδοθεί από τον Διεθνή Οργανισμό Τυποποίησης τον Ιανουάριο 2019, μπορείτε να τα δείτε στο ακόλουθο link:
Λευκωσία, 26 Φεβρουαρίου 2019 ΠΡΟΣ: ΘΕΜΑ: Ολα τα Μέλη Δημοσίευση Ευρωπαϊκών Προτύπων-CEN & CENELEC Κύριοι, Σας αποστέλλονται συνημμένα τα κείμενα που περιλαμβάνουν: Τα Ευρωπαϊκά Πρότυπα CEN και CENELEC
More informationCEN/TC 33 - Doors, windows, shutters, building hardware and curtain walling. EN 107:1980 Methods of testing windows - Mechanical test 89/106/EEC
C/TC 33 - Doors, windows, shutters, building hardware and curtain walling Standard reference Title Directive 107:1980 Methods of testing windows - Mechanical test 129:1984 130:1984 179:2008 477:1995 478:1995
More informationCORRIGENDA. (Publication of titles and references of harmonised standards under Union harmonisation legislation)
C 173/162 EN Official Journal of the European Union 13.5.2016 CORRIGENDA Corrigendum to Commission communication in the framework of the implementation of Directive 2006/95/EC of the European Parliament
More information1 EN : EN : EN 71-7:2014+A1: EN 302-2: EN 302-3: EN 303-1: EN : EN ISO :2017
Nr. Standard reference Title 1 EN 419212-1:2017 2 EN 419212-3:2017 3 EN 71-7:2014+A1:2017 4 EN 302-2:2017 5 EN 302-3:2017 6 EN 303-1:2017 7 EN 1459-1:2017 8 EN ISO 1833-4:2017 9 EN ISO 1833-7:2017 10 EN
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2017/C 298/02)
C 298/14 EN Official Journal of the European Union 8.9.2017 Commission communication in the framework of the implementation of Directive 2014/35/EU of the European Parliament and of the Council on the
More informationVydané medzinárodné normy a iné publikácie IEC za obdobie od do
Vydané medzinárodné normy a iné publikácie IEC za obdobie od 1. 1. 2016 do 31. 1. 2016 IEC TC/SC Dokument Dátum vydania Názov ISO/IEC JTC 1/SC 6 ISO/IEC/IEEE 8802-1AX:2016 2016-01-14 Information technology
More informationIEC NORMAS PUBLICADAS. As normas ISO/IEC já estão relacionadas em normas ISO Publicadas
IEC NORMAS PUBLICADAS As normas ISO/IEC já estão relacionadas em normas ISO Publicadas TC 1 - Terminology IEC 60050-614:2016 - International electrotechnical vocabulary - Part 614: Generation, transmission
More informationMauritian Standards/Amendments Published in 2013
Mauritian Standards/Amendments Published in 2013 Reference Title 2013 Notice No. Date Gazetted 2013 1 R MS 200:2013 Energy efficiency and labelling requirements Household room air conditioners 2 MS 207:2013
More informationVYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CENELEC za obdobie od do Stránka 1
Dokument Referenčný dokument Názov CLC TC/SC IEC TC/SC dop dow CLC/TR 50555:2010 Interruption indexes CLC TC 8X EN 60068-2-5:2011 IEC 60068-2-5:2010 (EQV) + corrigendum Dec. 2010 (EQV) Environmental testing
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Presley House Presley Way Crownhill Milton Keynes MK8 0ES United Kingdom Contact: Jeremy Hodge Tel: +44 (0) 1908 267300 Fax: +44 (0) 1908
More informationΔ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 48/2015 Απ. 4850, Απιθμόρ 48. ΟΙ ΠΔΡΙ ΣΤΠΟΠΟΙΗΗ, ΓΙΑΠΙΣΔΤΗ ΚΑΙ ΣΔΥΝΙΚΗ ΠΛΗΡΟΦΟΡΗΗ ΝΟΜΟI ΣΟΤ 2002 έωο 2012
346 Δ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 48/2015 Απ. 4850, 13.2.2015 Απιθμόρ 48 ΟΙ ΠΔΡΙ ΣΤΠΟΠΟΙΗΗ, ΓΙΑΠΙΣΔΤΗ ΚΑΙ ΣΔΥΝΙΚΗ ΠΛΗΡΟΦΟΡΗΗ ΝΟΜΟI ΣΟΤ 2002 έωο 2012 Γλωζηνπνίεζε βάζεη ηνπ Άξζξνπ 5 ηνπ Βαζηθνύ Νόκνπ 156(Ι)/2002
More informationJust Published. Karl Ruling. 118 publications since Just Published Sent: Saturday, 01 December :39
Karl Ruling From: Just Published Sent: Saturday, 01 December 2012 14:39 To: Karl Ruling Subject: Just Published by the IEC - Edition 11-12 Just Published 118 publications since
More informationNr. Standard reference
Nr. Standard reference 1 EN 54-5:2017 2 EN ISO 5395-3:2013/A1:2017 3 EN 12574-1:2017 4 EN 16573:2017 Title Fire detection and fire alarm systems - Part 5: Heat detectors - Point heat detectors Garden equipment
More informationGovernment Gazette Staatskoerant
Government Gazette Staatskoerant REPUBLIC OF SOUTH AFRICA REPUBLIEK VAN SUID AFRIKA Regulation Gazette No. 10177 10701 Regulasiekoerant Regulation Gazette Vol. 621 24 March Maart 2017 No. 40713 PART 1
More informationNot to be reproduced without the permission of Last date for receipt of BIS or used as a STANDARD comments is: 15 July 2012
For Comments Only Draft Indian Standard Graphic technology -- Safety systems -- Part 1: General requirements ICS 37.100.10 Not to be reproduced without the permission of Last date for receipt of BIS or
More informationThe Laboratory is qualified to update standards identifying the test procedures.
Page 1 of 19 The Laboratory is qualified to update standards identifying the test procedures. Tests: 2/1 Tensile test at ambient temperature IP No. 07002T001 (ČSN EN ISO 6892-1, ČSN EN ISO 15630-1, 2,
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. April 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC April 2015 Issued on 4 May 2015 Page 1 Information Procedure on Standards Notifications registered
More informationThe Laboratory is qualified to update standards identifying the test procedures.
Page 1 of 17 The Laboratory is qualified to update standards identifying the test procedures. Tests: 2/1 Tensile test at ambient temperature IP No. 07002T001 (ČSN EN ISO 6892-1, ČSN EN ISO 15630-1, 2,
More informationΗ Δημοσίευση έχει γίνει την Παρασκευή 6 Ιουλίου 2018 /Παράρτημα Τρίτο- Μέρος 1/Αρ. 5097/Κ.Δ.Π. 190/2018 και Κ.Δ.Π 191/2018.
Λευκωσία, 12 Ιουλίου 2018 ΠΡΟΣ: ΘΕΜΑ: Ολα τα Μέλη Δημοσίευση Ευρωπαϊκών Προτύπων-CEN & CENELEC Κύριοι, Σας αποστέλλονται συνημμένα τα κείμενα που περιλαμβάνουν: Τα Ευρωπαϊκά Πρότυπα CEN και CENELEC που
More informationTest procedure/ method name. method identification. Testing of industrial and explosion isolation valves and tank lining
The Laboratory is qualified to update standards identifying the test procedures. The laboratory requires/applies a flexible scope of accreditation permitted as detailed in the Annex. Updated list of activities
More informationEQUIPMENT & MATERIALS REQUIRING DGMS APPROVAL SL.NO. EQUIPMENT PROVISION OF REGULATION STANDARD FOLLOWED BIS LICENSING
APPENDIX-I EQUIPMENT & MATERIALS REQUIRING DGMS APPROVAL SL.NO. EQUIPMENT PROVISION OF REGULATION STANDARD FOLLOWED BIS LICENSING CMR, MMR, OMR, MINE 1957 1961 1984 RESCUE 1. Flame Safety Lamp 2(2) 2(2)
More informationΤα Διεθνή Πρότυπα που έχουν εκδοθεί από τον Διεθνή Οργανισμό Τυποποίησης τον Φεβρουάριο 2018, μπορείτε να τα δείτε στο ακόλουθο link
Λευκωσία, 16 Απριλίου 2018 ΠΡΟΣ: ΘΕΜΑ: Ολα τα Μέλη Δημοσίευση Ευρωπαϊκών Προτύπων-CEN & CENELEC Κύριοι, Σας αποστέλλονται συνημμένα τα κείμενα που περιλαμβάνουν: Τα Ευρωπαϊκά Πρότυπα CEN και CENELEC που
More informationCERTIFICATION BODY ACCREDITATION PROGRAM QUALITY AUDITING INSTITUTE
CERTIFICATION BODY ACCREDITATION PROGRAM Accredited Legal Entity: QUALITY AUDITING INSTITUTE #16-211 Schoolhouse Street, Coquitlam, BC V3K 4X9 Canada Telephone: (604) 461-8378 Fax: (604) 461-8377 Email:
More informationΕ.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 127/2018 Αρ. 5087, Αριθμός 127 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012
839 Ε.Ε. Παρ. ΙΙΙ(Ι) Κ.Δ.Π. 127/2018 Αρ. 5087, 11.5.2018 Αριθμός 127 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012 Γλσζηνπνίεζε βάζεη ηνπ Άξζξνπ 5 ηνπ Βαζηθνύ Νόκνπ 156(Η)/2002
More informationFurniture - Children's cots and folding cots for domestic use - Part 1: Safety requirements 5 EN 716-2:2017
Nr. Standard reference Title 1 CEN/CLC Guide 35:2017 Modalities for the common sessions of CEN and CENELEC governing bodies and for the common meetings of their advisory groups 2 EN ISO 294-1:2017 Plastics
More informationVYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do Označenie dokumentu Názov v angličtine Dop Dow Technická komisia
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 3. 2018 do 31. 3. 2018 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
More informationIEC PROJETOS EM VOTAÇÃO. IEC Ed.4: Railway applications - Traction transformers and inductors on board rolling stock
IEC PROJETOS EM VOTAÇÃO IEC/TC 9 - Electrical equipment and systems for railways Até 11 de Abril de 2014 IEC 60310 Ed.4: Railway applications - Traction transformers and inductors on board rolling stock
More informationISO NORMAS PUBLICADAS
ISO NORMAS PUBLICADAS ISO/IEC JTC 1 - Information technology ISO/IEC 29182-7:2015 - Information technology - Sensor networks: Sensor Network Reference Architecture (SNRA) - Part 7: Interoperability guidelines.
More informationIEC PROJETOS EM VOTAÇÃO SETEMBRO E OUTUBRO. IEC ED1 - Rotating electrical machines - Part 23: Repair, overhaul and reclamation
IEC PROJETOS EM VOTAÇÃO SETEMBRO E OUTUBRO IEC/TC 2 - Rotating machinery IEC 60034-23 ED1 - Rotating electrical machines - Part 23: Repair, overhaul and reclamation IEC 60034-14 ED4 - Rotating electrical
More informationIEC PROJETOS EM VOTAÇÃO
IEC PROJETOS EM VOTAÇÃO IEC/TC 10 - Fluids for electrotechnical applications. ATÉ 25 DE JULHO DE 2014 IEC 60599 Ed.3: Mineral oil-impregnated electrical equipment in service - Guide to the interpretation
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 63A Issue date 16 th June 2015 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44 (0)1244
More informationCONTROLLED GOODS AND THE APPLICABLE SAFETY STANDARDS PART I DOMESTIC OR HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL APPLIANCES
CONTROLLED GOODS AND THE APPLICABLE SAFETY STANDARDS PART I DOMESTIC OR HOUSEHOLD APPLIANCES AND SIMILAR ELECTRICAL APPLIANCES 1 Hair Dryers 8516.31 MS IEC 60335-2-23 Household and similar electrical appliances-
More informationCHECKLISTS ORGANIZED BY EXPOSURE CATEGORIES (SPECIFIC AGENTS OR HAZARDS; MIXTURES; MULTIMEDIA; OTHER (PROCEDURES, PROGRAMS)
CHECKLISTS ORGANIZED BY EXPOSURE CATEGORIES (SPECIFIC AGENTS OR HAZARDS; MIXTURES; MULTIMEDIA; OTHER (PROCEDURES, PROGRAMS) CHECKLIST TOPIC/TITLE PAGE NUMBERS Biological Agents Blood (Handling and Disposal)
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. November 2017
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC November 2017 Issued on : 1 December 2017 Page 1 Information Procedure on Standards Notifications
More informationIEC PROJETOS EM VOTAÇÃO. IEC 62256/Ed2: Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement.
IEC PROJETOS EM VOTAÇÃO IEC/TC 4 Hydraulic turbines IEC 62256/Ed2: Hydraulic turbines, storage pumps and pump-turbines - Rehabilitation and performance improvement. IEC/TC 9 - Electrical equipment and
More informationΔ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 418/2017 Απ. 5053, Απιθμόρ 418. ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 έσο 2012
3244 Δ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 418/2017 Απ. 5053, 8.12.2017 Απιθμόρ 418 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 έσο 2012 Γλσζηνπνίεζε βάζεη ηνπ Άξζξνπ 5 ηνπ Βαζηθνχ Νφκνπ 156(Η)/2002
More informationVYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od do
VYDANÉ EURÓPSKE NORMY A INÉ PUBLIKÁCIE CEN za obdobie od 1. 7. 2016 do 31. 7. 2016 dop dátum vydania: dátum, do ktorého sa musí EN prevziať na národnej úrovni vydaním identickej národnej normy alebo oznámením
More informationIEC NORMAS PUBLICADAS SETEMBRO E OUTUBRO DE 2018
IEC NORMAS PUBLICADAS SETEMBRO E OUTUBRO DE 2018 IEC/TC 2 - Rotating machinery IEC 60034-14:2018 - Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56
More informationG Calculation of perforation efficiency ISO/TR 24498: 2006 Paper, board and pulps Estimation of uncertainty for test methods C
International Standards in process An International Standard is the result of an agreement between the member bodies of ISO. A first important step towards an International Standard takes the form of a
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 072A Issue date 23 rd March 2018 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SIRA Certification Service Accredited to ISO/IEC 17065:2012 to provide product conformity Unit 6 Hawarden Industrial Park Hawarden Deeside
More informationList of tests (2018)
SRI Center for Physical Sciences and Technology Textile Institute Department of Textiles Physical-Chemical testing List of tests (2018) 1. Fibre content analysis 1.1 Melting point determination ISO/TR
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. January 2018
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC January 2018 Issued on : 16 February 2018 Page 1 Information Procedure on Standards Notifications
More informationISO INTERNATIONAL STANDARD. Hydrogen generators using fuel processing technologies Part 1: Safety
INTERNATIONAL STANDARD ISO 16110-1 First edition 2007-03-15 Hydrogen generators using fuel processing technologies Part 1: Safety Générateurs d'hydrogène utilisant les technologies de traitement du carburant
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC February 2015 Issued on : 6 March 2015 Page 1 Information Procedure on Standards Notifications registered
More informationΣας αποστέλλονται συνημμένα τα κείμενα που περιλαμβάνουν:
Λευκωσία, 13 Νοεμβρίου 2018 ΠΡΟΣ: ΘΕΜΑ: Ολα τα Μέλη Δημοσίευση Ευρωπαϊκών Προτύπων-CEN & CENELEC Κύριοι, Σας αποστέλλονται συνημμένα τα κείμενα που περιλαμβάνουν: Τα Ευρωπαϊκά Πρότυπα CEN και CENELEC που
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. May 2018
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC May 2018 Issued on : 1 June 2018 Page 1 Information Procedure on Standards Notifications registered
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. March 2014
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC March 2014 Issued on : 04 April 2014 Page 1 Information Procedure on Standards Notifications registered
More informationUse case methodology - Part 2: Definition of the templates for use cases, actor list and requirements list 4 IEC 60836:2015 PRV
Nr. Standard reference Title 1 IEC TS 62239-1:2015 Process management for avionics - Management plan - Part 1: Preparation and maintenance of an electronic components management plan 2 IEC TS 62686-1:2015
More informationΠΑΡΑΡΤΗΜΑ ΤΡΙΤΟ ΤΗΣ ΕΠΙΣΗΜΗΣ ΕΦΗΜΕΡΙΔΑΣ ΤΗΣ ΔΗΜΟΚΡΑΤΙΑΣ Αρ της 2ας ΑΥΓΟΥΣΤΟΥ 2002 ΑΙΟΙΚΗΤΙΚΕΣ ΠΡΑΞΕΙΣ
Κ.Δ.Π. 374/2002 ΠΑΡΑΡΤΗΜΑ ΤΡΙΤΟ ΤΗΣ ΕΠΙΣΗΜΗΣ ΕΦΗΜΕΡΙΔΑΣ ΤΗΣ ΔΗΜΟΚΡΑΤΙΑΣ Αρ. 3627 της 2ας ΑΥΓΟΥΣΤΟΥ 2002 ΑΙΟΙΚΗΤΙΚΕΣ ΠΡΑΞΕΙΣ ΜΕΡΟΣ Ι Κανονιστικές Διοικητικές Πράξεις Αριθμός 374 ΟΙ ΠΕΡΙ ΚΥΠΡΙΑΚΩΝ ΠΡΟΤΥΠΩΝ
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
ISO/IEC 17065:2012 to provide product conformity certification Presley Way Crownhill Milton Keynes MK8 0ES Contact: Tracie Hunter Tel: +44 (0)1908 267300 Fax: +44 (0)1908 267255 E-Mail: mail@basec.org.uk
More informationΔ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 202/2015 Απ. 4877, Απιθμόρ 202 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012
Δ.Δ. Παπ. ΙΙΙ(Ι) Κ.Γ.Π. 202/2015 Απ. 4877, 12.6.2015 Απιθμόρ 202 1430 ΟΗ ΠΔΡΗ ΣΤΠΟΠΟΗΖΖ, ΓΗΑΠΗΣΔΤΖ ΚΑΗ ΣΔΥΝΗΚΖ ΠΛΖΡΟΦΟΡΖΖ ΝΟΜΟI ΣΟΤ 2002 ΔΩ 2012 Γλωζηνπνίεζε βάζεη ηνπ άξζξνπ 5 ηνπ βαζηθνύ Νόκνπ 156(Η)
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. September 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC September 2015 Issued on : 2 October 2015 Page 1 Information Procedure on Standards Notifications
More informationFill Point, Level Gauges, and Control Range
Fill Point, Level Gauges, and Control Range Page 1 Contents Fill Points, Level Gauges, and Control Equipment... 3 Fill Point Cabinets... 4 Single Tank Cabinet... 5 Twin Tank Cabinet... 6 Three Tank Cabinet...
More informationDIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.
DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC November 2010 Issued on: 2 December 2010 Chapter I: Register of new notifications
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. May 2017
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC May 2017 Issued on : 2 June 2017 Page 1 Information Procedure on Standards Notifications registered
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. October 2014
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC October 2014 Issued on : 07 November 2014 Page 1 Information Procedure on Standards Notifications
More informationCABLE & HOSE PROTECTION PRODUCT OVERVIEW
CABLE & HOSE PROTECTION PRODUCT OVERVIEW WORKPLACE SAFETY & ASSET PROTECTION MINING MARINE POWER GENERATION TRANSPORT DRILLING & EXPLORATION Superior Safety - Cable & Hose Protection COMPLETE CABLE & HOSE
More informationDIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES BY MEMBERS OF CENELEC
DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES BY MEMBERS OF CENELEC 1st Quarter 2008 Issued on: 18 April 2008-2 - Chapter I: Register of new notifications p. 4-7 Chapter II: List
More informationHeating boilers - Part 2: Heating boilers with forced draught burners - Special requirements for boilers with atomizing oil burners 4 EN 565:2017
Nr. Standard reference English title 1 EN 71-3:2013+A2:2017 Safety of toys - Part 3: Migration of certain elements 2 EN 71-14:2014+A1:2017 Safety of toys - Part 14: Trampolines for domestic use 3 EN 303-2:2017
More informationNEWS STANDARDS: 2017/01
NEWS STANDARDS: 2017/01 IEC 60050-723:1997/AMD2:2016 - Amendment 1 - International electrotechnical vocabulary - Part 723: Broadcasting: Sound, television, data IEC 60794-2-22:2016 - Optical fibre cables
More informationDIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.
DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC January 2012 Issued on : 02 February 2012 Page 1 Directive 98/34/EC Information
More informationAdvantages / Characteristics
Air to Air 50 W 30 W cooling capacity 163x104x144mm (LxBxH) 1,9 kg Air to Air 70 W 36 W cooling capacity 163x104x144mm (LxBxH) 1,9 kg Air to Air 75 W 30 W cooling capacity 130x109x163mm (LxBxH) 1,5 kg
More informationΤα Διεθνή Πρότυπα που έχουν εκδοθεί από τον Διεθνή Οργανισμό Τυποποίησης τον Οκτώβριο 2017, μπορείτε να τα δείτε στο ακόλουθο link:
Λευκωσία, 14 Νοεμβρίου 2017 ΠΡΟΣ: ΘΕΜΑ: Ολα τα Μέλη Δημοσίευση Ευρωπαϊκών Προτύπων-CEN & CENELEC Κύριοι, Σας αποστέλλονται συνημμένα τα κείμενα που περιλαμβάνουν: Tα Ευρωπαϊκά Πρότυπα CEN και CENELEC που
More informationISO NORMAS PUBLICADAS JANEIRO E FEVEREIRO
ISO NORMAS PUBLICADAS JANEIRO E FEVEREIRO ISO/JTC 1 - Information technology ISO/IEC 9075-1:2016 - Information technology -- Database languages -- SQL -- Part 1: Framework (SQL/Framework) ISO/IEC 9075-2:2016
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60694 Edition 2.2 2002-01 Edition 2:1996 consolidated with amendments 1:2000 and 2:2001 Common specifications for high-voltage switchgear and controlgear standards IEC 2002 Copyright
More informationΤα Διεθνή Πρότυπα που έχουν εκδοθεί από τον Διεθνή Οργανισμό Τυποποίησης τον Αύγουστο 2018, μπορείτε να τα δείτε στο ακόλουθο link:
Λευκωσία, 19 Σεπτεμβρίου 2018 ΠΡΟΣ: ΘΕΜΑ: Ολα τα Μέλη Δημοσίευση Ευρωπαϊκών Προτύπων-CEN & CENELEC Κύριοι, Σας αποστέλλονται συνημμένα τα κείμενα που περιλαμβάνουν: Τα Ευρωπαϊκά Πρότυπα CEN και CENELEC
More information13. UNITED KINGDOM Standards Supply Voltage and Plug Configurations 247
13. UNITED KINGDOM 13.1 Standards 13.1.1 BSI 240 13.1.2 BASEC 242 13.1.3 BBC 242 13.1.4 BNFL 242 13.1.5 BRB 242 13.1.6 British Telecom 243 13.1.7 Department of the Environment 243 13.1.8 Department for
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. April 2017
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC April 2017 Issued on : 8 May 2017 Page 1 Information Procedure on Standards Notifications registered
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. March 2018
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC March 2018 Issued on : 13 April 2018 Page 1 Information Procedure on Standards Notifications registered
More informationGas-fired water heaters, volume III, storage water heaters with input ratings above 75,000 Btu per hour, circulating and instantaneous
IAS Accreditation Number Company Name Address TL-657 Room 209, No. 46, Nanxiang 3 rd Road Science City Development Zone Guangzhou 510663 People s Republic of China Javen Xuan, Quality Manager Contact Name
More informationStandards - Consolidated with amendments The dates in brackets following the document number are the year of publication and the approval date.
SANS 110 (SABS 110) (2017) (2017-11-17) Sealing compounds for the building industry, two-component, polysulphide base Covers two types of elastomeric two-component polysulphide base joint sealing compounds
More informationTextiles - Tests for colour fastness - Part B03: Colour fastness to weathering: Outdoor exposure (ISO 105-B03:2017) 3 EN ISO 287:2017
Nr. Standard reference Title 1 EN 419212-2:2017 Application Interface for Secure Elements for Electronic Identification, Authentication and Trusted Services - Part 2: Signature and Seal Services 2 EN ISO
More informationΤα Διεθνή Πρότυπα που έχουν εκδοθεί από τον Διεθνή Οργανισμό Τυποποίησης τον Ιούλιο 2018, μπορείτε να τα δείτε στο ακόλουθο link:
Λευκωσία, 7 Σεπτεμβρίου 2018 ΠΡΟΣ: ΘΕΜΑ: Ολα τα Μέλη Δημοσίευση Ευρωπαϊκών Προτύπων-CEN & CENELEC Κύριοι, Σας αποστέλλονται συνημμένα τα κείμενα που περιλαμβάνουν: Τα Ευρωπαϊκά Πρότυπα CEN και CENELEC
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2017
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC February 2017 Issued on : 3 March 2017 Page 1 Information Procedure on Standards Notifications registered
More informationTechnical Specification
Cochran Ltd Newbie Works, Annan, Dumfries & Galloway, Scotland, UK DG12 5QU Telephone: +44 (0)1461 202111 Fax: +44 (0)1461 205511 Email: info@cochran.co.uk www.cochran.co.uk Three Pass Wet Back Reverse
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 17065:2012 to provide product conformity certification Newport Business Park New Port Road Ellesmere Port CH65 4LZ United Kingdom Contact:
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. August 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC August 2015 Issued on 4 September 2015 Page 1 Information Procedure on Standards Notifications registered
More informationIRISH STANDARDS BASED ON CEN STANDARDS PUBLISHED ON
IRISH STANDARDS BASED ON CEN STANDARDS PUBLISHED ON 15 JUNE 2007 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. I.S. EN 54-4:1997/A2:2007 Fire detection and fire alarm systems - Part 4: Power supply equipment I.S.
More informationStandard Name Standard number Adopted standard
5 September 2014 SII-IMQ Agreement Categories and Standards List Audio/video equipment (TRON) Office & Data equipment (OFF) Medical equipment (MED) Measurement equipment (MEAS) Household and similar equipment
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. April 2018
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC April 2018 Issued on : 16 May 2018 Page 1 Information Procedure on Standards Notifications registered
More informationNr. Standard reference Title
Nr. Standard reference Title 1 CEN/TR 419040:2018 Rationalized structure for electronic signature standardization - Guidelines for citizens 2 CEN/TR 419030:2018 Rationalized structure for electronic signature
More informationNanotechnology-Based Gas Sensors
Nanotechnology-Based Gas Sensors Applications include: Detection of flammable gases for the petrochemical industry Quality control by the chemical industry Methane detection for the mine safety industry
More informationΛευκωσία, 22 Αυγούστου Δημοσίευση Ευρωπαϊκών Προτύπων-CEN & CENELEC. Κύριοι, Σας αποστέλλονται συνημμένα τα κείμενα που περιλαμβάνουν:
Λευκωσία, 22 Αυγούστου 2017 ΠΡΟΣ: ΘΕΜΑ: Ολα τα Μέλη Δημοσίευση Ευρωπαϊκών Προτύπων-CEN & CENELEC Κύριοι, Σας αποστέλλονται συνημμένα τα κείμενα που περιλαμβάνουν: Τα Ευρωπαϊκά Πρότυπα CEN και CENELEC που
More informationΤα Διεθνή Πρότυπα που έχουν εκδοθεί από τον Διεθνή Οργανισμό Τυποποίησης μπορείτε να τα δείτε στο ακόλουθο link
Λευκωσία, 12 Οκτωβρίου 2016 ΠΡΟΣ: ΘΕΜΑ: Ολα τα Μέλη Δημοσίευση Ευρωπαϊκών Προτύπων-CEN & CENELEC Κύριοι, Σας αποστέλλονται συνημμένα τα κείμενα που περιλαμβάνουν: Τα Ευρωπαϊκά Πρότυπα CEN και CENELEC που
More informationThe Safest Connections...
The Fluid Manager The Safest Connections... The Lutz Accessory Range for Electrical & Pneumatic Drum, Tote and Container Pumps A c c e s s o r y R a n g e Accessory Range Safety is our Concern At a glance
More informationCERTIFICATION BODY ACCREDITATION PROGRAM (CBAP) Scope of Accreditation
CERTIFICATION BODY ACCREDITATION PROGRAM (CBAP) Scope of Accreditation Accredited Legal Entity: LABTEST CERTIFICATION INC. Contact Name: Address: Kavinder Dhillon 3133-20800 Westminster Highway Richmond,
More informationBSOL Modules Key Series
BSOL Modules Key Series There are 53 BSOL modules based on International Classification for Standards (ICS), which now have the series expressed in the tables over page with the inclusion of the top 100
More information