Cable Connectors For Armored Cable, Flexible Metal Conduit, Interlocked AC-38 Cables, NM and SE Cable
|
|
|
- Alberta Bradley
- 6 years ago
- Views:
Transcription
1 For Armored Cable, Flexible Metal Conduit, Interlocked AC-38 Cables, NM and SE Cable To ground and secure Armored Cable, Flexible Metal Conduit and Interlocked Metal Clad Cables to boxes and enclosures. To secure NM and SE Cables to boxes and enclosures. Available with insulated throats. All center stopped. Provided with locknuts. KC-50, KC-50T, KC-51 UL Listed for metal clad, armored cable, flexible metal conduit, sheathed cable, SE cable: E KC-75, KC-75T, KC-76 UL Listed for, armored cable, flexible metal conduit, sheathed cable, SE cable: E KC-100, KC-100T, KC-125, KC-125T UL Listed for flexible metal conduit: E KC-100, KC-100T, KC-125, KC-125T UL Listed for sheathed cable: E KC-100, KC-100T, KC-125, KC-125T UL Listed for SE cable: E KC-150 through KC-400 and KC-150T through KC-400T UL Listed for flexible metal conduit: E KC-500 and KC-500T: UL and CSA Listing is not applicable A B C Type KC-50 Type KC-76 Flex Millimeters Min. - Max. Type KC-350 Type KC-500 Type KC-100 Type KC-300 Insulated Throat 1/ (1.13) (0.44) (1.88) ( ) KC-50 KC-50T 1/2 (3/4 KO) (1.13) (0.44) (1.88) ( ) KC-51 3/ (1.19) (0.50) (2.13) ( ) KC-75 KC-75T 3/4 (1 KO) (1.19) (0.50) (2.13) ( ) KC (1.25) (0.56) (2.44) ( ) KC-100 KC-75T 1-1/ (1.31) (0.56) (2.81) ( ) KC-125 KC-125T 1-1/ (1.81) (0.75) (3.44) ( ) KC-150 KC-150T (2.13) (0.88) (4.25) ( ) KC-200 KC-200T 2-1/ (2.63) (0.88) (5.00) ( ) KC-250 KC-250T (3.06) (1.06) (5.50) ( ) KC-300 KC-300T 3-1/ (3.56) (1.25) (6.50) ( ) KC-350 KC-350T (3.69) (1.25) (7.00) ( ) KC-400 KC-400T (5.00) (1.50) (8.38) ( ) KC-500 KC-500T 380
2 For Armored Cable and Flexible Metal Conduit Application To ground and secure Armored Cable and Flexible Metal Conduit to boxes and enclosures. Feature Male hub threads NPS Available with insulated throat. C-5 through C-8 UL Listed for armored cable: E C-8, through UL Listed for flexible metal conduit: E UL Listed flexible metal conduit fittings are suitable for use in Hazardous Location under NEC 501-4(b), Class I, Division 2, and suitable as a grounding means under NEC CSA Certified for Armored Cable: Type C-5 End Stopped Type C-8 Type Center Stopped Type Type Center Stopped Body Max. Width Flex. Insulated Throat 3/8 (1/2 KO) (0.56) (0.44) (1.13) ( ) C-5 1/ (0.94) (0.50) (1.56) ( ) C-8 C-8T 3/ (1.13) (0.50) (1.75) ( ) T (1.19) (0.56) (2.19) ( ) T 1-1/ (1.25) (0.63) (2.50) ( ) T 1-1/ (1.88) (0.69) (2.63) ( ) T (2.00) (0.75) (3.31) ( ) T 2-1/ (2.06) (0.94) (4.06) ( ) T (2.25) (0.94) (4.63) ( ) T 381
3 Cable Connectors Two Screw Clamp and 90 Squeeze Connectors For Armored Cable and Flexible Metal Conduit Application: To ground and secure Armored Cable and Flexible Metal Conduit to boxes and enclosures. Male hubs - NPS. Provided with center stop. Available with insulated throats. Also suitable for NM and SE cable. (1203) UL Listed: E Type ACV-938 Type AC-150 Type AC-200 Type ACV-50 Type AC-125 Type AC-250 Type AC-400 Insulated Throat A B C Flex 3/8 (1/2 KO) (1.31) (0.81) (0.44) ( ) ACV-938 ACV-938T 1/ (1.75) (1.06) (0.44) ( ) ACV-50 ACV-50T 3/ (1.81) (1.13) (0.44) ( ) ACV-75 ACV-75T (2.06) (1.56) (0.56) ( ) AC-100 AC-100T 1-1/ (2.81) (2.00) (0.56) ( ) AC-125 AC-125T 1-1/ (3.81) (2.81) (0.56) ( ) AC-150 AC-150T (4.75) (3.25) (0.69) ( ) AC-200 AC-200T 2-1/ (6.25) (4.31) (0.88) ( ) AC-250 AC-250T (7.25) (5.13) (1.00) ( ) AC-300 AC-300T 3-1/ (10.25) (7.75) (1.25) ( ) AC-350 AC-350T (13.00) (9.75) (1.25) ( ) AC-400 AC-400T 382
4 Squeeze Connector For Armored Cable and Flexible Metal Conduit Application: To ground and secure Armored Cable and Flexible Metal Conduit to boxes and enclosures. Male hubs - NPS. Provided with center stop. Available with insulated throats. Also suitable for NM and SE cable. (1203) UL Listed: E Type AC-38 led RMC and IMC to Flexible Metal Conduit Female hubs - NPT. Zinc plated UL Listed: E Type CB Type AC-50 3/8 (1/2 KO) 1/2 3/4 Body (1.38) (1.94) (2.13) (0.44) (0.44) (0.50) Max. Width (1.25) (1.69) (1.75) Flex ( ) ( ) ( ) AC-38 AC-50 AC-75 Insulated Throat AC-38T AC-50T AC-75T Trade Size 1/2 3/4 1 Max. Dia. Flex Range 38.1 (1.50) 44.5 (1.75) 47.8 (1.88) 31.8 (1.25) 38.1 (1.50) 47.8 (1.88) ( ) ( ) ( ) CB-50 CB-75 CB
5 Duplex Connector For Armored Cable Application: To ground and secure two Armored Cables to boxes and enclosures. Cable stop. UL Listed for armored cables 14/2 to 10/2. Zinc plated (1203) UL Listed: CSA Standard: C22.2 No. 18 Body Max. Width Type 25-38C 3/8 (1/2 KO) (1.06) (0.44) (1.56) ( ) 25-38C 384
6 For Armored Cable To ground and secure armored cable to boxes and enclosures. Cable stop. UL Listed for armored cable.. UL Listed: E A B C Type C-15L Cable Front View 3/8 (1/2 KO) (0.56) (0.50) (1.38) ( ) C-15L Type C1Z Body Max. Width Flex. 3/8 (1/2 KO) (0.56) (0.41) (1.00) ( ) C-1Z 385
7 Aluminum Sheathed For Smooth and Corrugated ALS Cable NEC: To ground and secure Aluminum Sheathed Cable to boxes and enclosures. End stopped. Furnished with locknut. NEC Certifications and Compliances UL Listed: E Fed. Spec: W-F-406E K.O. Size Inches of Clamp of Type ALS End Stopped Cable Range Dia. over Armor Width of Clamp Min. Max. 1/ (0.56) (0.47) (1.38) 9.65 (0.38) (0.53) ALS
8 For Non-Metallic Sheathed Cable Type C-11LS - to secure non-metallic sheathed cable to boxes and enclosures. Type 806 and Type 906 Series - to secure non-metallic sheathed cable, service entrance cable and flexible cords to boxes and enclosures. Available with insulated throats. UL Listed: E UL Listed for 806, 906Z, 907, 908, 909 for NM and SE Cables UL Listed: E UL Listed for 806, 906Z for SE Cable C-11L - UL Listed E23237 for NM Cable Fed. Spec: W-F-406E Type C-11LS Type 806 Type 908 Type 909 Clamp Min. Max. Width A B C Insulated Throat 1/ (0.19) (0.63) (0.56) (0.44) (1.38) C-11LS C-11LST 3/ (0.37) (0.84) (0.84) (0.69) (0.44) (1.81) T (0.42) (1.05) (1.05) (0.69) (0.56) (2.06) 906Z 906T 1-1/ (0.75) (1.34) (1.34) (0.81) (0.56) (2.44) T 1-1/ (0.91) (1.45) (1.55) (0.88) (0.63) (2.75) T (1.39) (2.03) (2.03) (0.94) (0.75) (3.38) T Longer screw to accommodate extra flexible cables. Not CSA Certified. 387
9 For Non-Metallic Sheathed Flat Cable To secure non-metallic sheathed flat cable, SE/SEU flat cable, and other oval (flat) non-metallic cables to boxes and enclosures. 2-screw double clamp - open throat type. Furnished with locknut. UL Listed: E CSA Certified: Fed. Spec: W-F-406E SEU Cable Range (Braid Neoprene and PVC Jacketed) Type 806F Type 908F Type 909F Clamp Range A B C Min. Max. Width 3/4 3#10 to 3# (0.69) (0.44) (1.81) 8.38 (0.33) (0.82) (0.82) 806F 1 3#10 to 3# (0.69) (0.56) (2.06) 7.62 (0.30) (1.06) (1.06) 906F 1-1/4 3#3 to 3#1/ (0.81) (0.56) (2.44) (0.50) (1.35) (1.35) 907F 1-1/2 3#1/0 to 3#3/ (0.88) (0.63) (2.75) (0.59) (1.11) (1.56) 908F 2 3#2/0 to 3#4/ (0.94) (0.75) (3.38) (0.77) (1.14) (1.78) 909F Longer screw to accommodate extra flexible cables. Not CSA Certified. 388
Speedlock AMC Connectors...KA1. Armored Cable Connectors...KB1-KB5 Metal Clad Cable Connectors...KB1-KB5 Flexible Metal Conduit Connectors...
SECTION K INDEX Product Description Page Number Speedlock AMC Connectors............................KA Armored Cable Connectors...........................KB-KB5 Metal Clad Cable Connectors.........................KB-KB5
NELSON HEAT TRACING SYSTEMS
DESCRIPTION The PLT-BY Tee Splice Connection Kit is for use with all versions of Nelson Heat Tracing Systems LT, CLT, HLT and NC heater cables. Compatible for use with any vendor s heater cables small
NELSON HEAT TRACING SYSTEMS
DESCRIPTION The SLT-LPS Entry Seal Kit provides a watertight entry into a junction box suitable for this application. This kit includes cable seals for power and end terminations. The SLT-LPS kit is designed
Corra/Clad MC Cable The contractors cable of choice in place of conduit and wire.
Corra/Clad MC Cable The contractors cable of choice in place of conduit and wire. Installs fast and easy Lowers labor costs Replaces conduit and wire Provides superior grounding UL Listed Corra/Clad MC
Cable Glands. Description Introduction to Cable Glands 399. EEXe Series EEXe Series. A2F, E1FX/E2FX, E1FW/E2FW and T3 Series
Description Page Introduction to Cable Glands 399 EEXe Series 400-401 Polyamide Cable Glands for Unarmored Cable Increased Safety EEXe Series Ex e Certified Ex I Application Entry Thread Seal A2F, E1FX/E2FX,
The Star Teck Extreme STE/STEX Series Connectors
The Star Teck Extreme STE/STEX Series Connectors Designed to stand up to the harshest and most corrosive environments. Three Generations of Improvements! Spin On, Star Teck, Star Teck Extreme Tray Cable
North American Cable Glands
North American Cable Glands INTRODUCTION Linking the future As the worldwide leader in the cable industry, Prysmian Group believes in the effective, efficient and sustainable supply of energy and information
Band Heaters W A T L O W. Special Mica Barrel and Nozzle
W A T L O W For over 80 years, Watlow has been solving complex and unique application problems with standard mica barrel and nozzle heaters. Watlow is continuously improving design and application knowledge
NELSON HEAT TRACING SYSTEMS
DESCRIPTION The ALT-LPM Power Connection Kit without Enclosure is constructed of cast aluminum for use with all versions of Nelson Heat Tracing Systems LT, HLT & NC heater cables. Compatible for use with
NELSON HEAT TRACING SYSTEMS INSTALLATION
DESCRIPTION The ALT-BY Tee Splice Connection Kit is constructed of cast aluminum for use with all versions of Nelson Heat Tracing Systems LT, CLT, HLT and NC heater cables. Compatible for use with any
The Next Generation of Greenfield Connectors. Our flex System is Your Solution for Electrical Runs
1/2 to 2 Solid Steel or luminum The Next Generation of Greenfield onnectors SPE-flex Our flex System is Your Solution for Electrical Runs connectors Since 1946 Straight onnectors for Enclosures or Use
NELSON HEAT TRACING SYSTEMS
DESCRIPTION The PLT-L Series End of Circuit Light Kit is for use with all versions of LT, CLT, HLT and NC heater cables. Compatible for use with any vendor s heater cables smaller than 11mm (.44 ) diameter.
AGENDA. NEC Code-Making Panel 14. Report on Proposal Meeting. January 16-21, Hilton Head, SC
National Fire Protection Association 1 Batterymarch Park, Quincy, MA 02169-7471 Phone: 617-770-3000 Fax: 617-770-0700 www.nfpa.org AGENDA NEC Code-Making Panel 14 Report on Proposal Meeting January 16-21,
Contender Series Factory Sealed Manual Motor Starters and Contactors Explosionproof, Dust-Ignitionproof
Contender Series Factory Sealed Manual Motor Starters and Contactors Applications Manual motor starters are available to meet any plant installation requirement. They may be used to install a variety of
LED Flex Tube Assembly Guide
LED Flex Tube Assembly Guide WARNING: NEVER APPLY POWER TO FLEX TUBE WHILE COILED!!! Please read entire guide before beginning assembly or installation. Licensed electricians should provide all electrical
NHR-25 Feed Hopper with Agitator
Instruction Sheet P/N 0920-02 Description This instruction sheet provides specifications, installation instructions, and parts lists for the NHR-25 Powder Feed Hopper with Agitator. This hopper is used
NELSON HEAT TRACING SYSTEMS
DESCRIPTION The Z1-PLT-LPM Power Connection Kit is designed for terminating one heater cable to customer supplied power wiring. This kit is designed for use with all wattages of Nelson Heat Tracing Systems
FRP HEATING SYSTEM INSTALLATION, OPERATION & MAINTENANCE MANUAL FRP.IOM.R1
FRP HEATING SYSTEM INSTALLATION, OPERATION & MAINTENANCE MANUAL FRP.IOM.R1 Hotfoil, Inc. Robbinsville, NJ 08691 Phone: 609.259.4118 / Fax : 609.259.4119 http://hotfoil.com TABLE OF CONTENTS I Product Specification
The Next Generation of Greenfield Connectors. Our flex System is Your Solution for Electrical Runs
1/2 to 4 Solid Steel or luminum The Next Generation of Greenfield onnectors SPE-flex Our flex System is Your Solution for Electrical Runs connectors GURNTEED to Save Time On Every onnection You Make. Patent
NELSON HEAT TRACING SYSTEMS
DESCRIPTION The Z1-PLT-BC Power Connection Kit is designed for terminating on heater cable to customer supplied power wiring. This kit is designed for use with all wattages of Nelson Heat Tracing Systems
A. Connected to the equipment ground B. Bonded to the box C. Connected to nearest water pipe D. Connected to a ground rod
Journeyman and Master Common Exam 2 1 The grounding terminal of a grounding-type receptacle installed in a metal box shall be? A. Connected to the equipment ground B. Bonded to the box C. Connected to
ELECTRICAL SUPPLIES NATIONAL REFRIGERATION PRODUCTS WIRE NUTS HEAT SHRINK TUBING CABLE STAPLES CABLE MARKERS
WIRE NUTS HEAT SHRINK TUBING Color-coded connector shells are made from high dielectric, smooth polypropylene plastic to eliminate porosity and surface cracking. Resists practically all chemical action
NELSON HEAT TRACING SYSTEMS
DESCRIPTION The ALT- continuity monitor device is used to monitor bus continuity on a parallel type heater cable. After the heater cable is installed on the pipe, connect the ALT- to the opposite end of
Report on Proposals June 2013 NFPA 70
14-1 Log #1170m NEC-P14 Russell LeBlanc, The Peterson School In articles 90 through 830, if the wording is not already there, then add the words (or other structure(s)) after the word BUILDING(S) wherever
COMMON WORK RESULTS FOR ELECTRICAL: Basic Electrical Materials Methods
1. BASIC ELECTRICAL MATERIALS 1. All conduit and raceway must be 3/4" or larger. Exposed raceway in finished areas shall be in 700 or larger wiremold. Exception: runs to individual devices 10 or less,
B C D. Strip Heaters. Channel Strip Heaters Ceramic Insulated. To order, call or shop online at omega.com SM
Ceramic Insulated A Reliable Heat Source with Seamless Stainless Steel Sheath Flat Surface Mounting Installations Used in Hundreds of Industrial and Commercial Heating Applications Typical Applications
B C D. Strip Heaters. Channel Strip Heaters Ceramic Insulated. To order, call or shop online at omega.com SM
Ceramic Insulated A Reliable Heat Source with Seamless Stainless Steel Sheath Flat Surface Mounting Installations Used in Hundreds of Industrial and Commercial Heating Applications Typical Applications
Band Heaters. Rectangular Band Heaters, Strip, Ring and Flat Heaters. Contact Accessories, Connection Boxes, Clamping Devices
Band Heaters Mica Insulated Band Heaters (HM) Ceramic Insulated Band Heaters (KHM) Rectangular Band Heaters, Strip, Ring and Flat Heaters Protection Housings (WSM) Cast Heaters, Band, Flat or Custom Insulating
MECKLENBURG COUNTY. Land Use and Environmental Service Agency Code Enforcement 8/10/11 ELECTRICAL CONSISTENCY MEETING. Code Consistency Questions
MECKLENBURG COUNTY Land Use and Environmental Service Agency Code Enforcement 8/10/11 ELECTRICAL CONSISTENCY MEETING Code Consistency Questions 1. Is low voltage cable allowed to be run through drilled
NELSON HEAT TRACING SYSTEMS ALT-BC STANDARD POWER CONNECTION KIT
DESCRIPTION The ALT-BC Standard Power Connection Kit is constructed of cast aluminum for use with all versions of Nelson Heat Tracing Systems LT, CLT, HLT and NC heater cables. Compatible for use with
TABLE OF CONTENTS CHAPTER 1 GENERAL RULES CHAPTER 2 WIRING AND PROTECTION... 51
TABLE OF CONTENTS About This Textbook...xi How to Use the National Electrical Code... 1 Article 90 Introduction to the National Electrical Code... 7 90.1 Purpose of the NEC... 7 90.2 Scope of the NEC...
Contender Series Factory Sealed Manual Motor Starters and Contactors Explosionproof, Dust-Ignitionproof
Contender Series Factory Sealed Manual Motor Starters and Contactors Controls NEC/CEC CLASS/ZONE RATED HAZARDOUS LOCATION MOTOR STARTERS Applications Manual motor starters are available to meet any plant
AFC Cable Systems: the Cable Industry Leader for Over 80 Years
AFC Cable Systems: the Cable Industry Leader for Over 80 Years AFC Cable Systems, Inc, is proud to announce the launch of two new Type MC cables, MC-Quik and MC-Stat. These two new cables offer the fastest
Michigan Chapter IAEI Annual Meeting Ann Arbor, Michigan Code Panel Questions December 5 th and 6 th, 2013
Michigan Chapter IAEI Annual Meeting Ann Arbor, Michigan Code Panel Questions December 5 th and 6 th, 2013 1. Is a standard wire-nut approved for a wet location as in an outside j-box? Is there a listed
2016 CDM Smith All Rights Reserved July 2016 SECTION FIBER OPTIC DATA NETWORK
PART 1 GENERAL 1.01 SCOPE OF WORK SECTION 27 12 23 FIBER OPTIC DATA NETWORK A. Furnish, install, terminate, and test all fiber optic equipment and cabling necessary for a complete and functional data highway
Second Revision No. 601 NFPA [ Section No [Excluding
Second Revision No. 601 NFPA 70 2015 [ Section No. 300.4 [Excluding any Sub Sections] ] Where subject to physical damage, conductors, raceways, and cables shall be protected. Informational Note: Minor
1. Building wires and cables rated 600 V and less. 2. Connectors, splices, and terminations rated 600 V and less.
Copyright 2010 AlA MasterSpec Full Length 09/10 SECTION 260519- LOW-VOLTAGE ELECTRICAL POWER CONDUCTORS AND CABLES PART I-GENERAL 1.1 SUMMARY A. Section Includes: 1. Building wires and cables rated 600
SECTION BASIC ELECTRICAL MATERIALS AND METHODS. A. This Section includes basic electrical materials and methods including:
SECTION 16050 BASIC ELECTRICAL MATERIALS AND METHODS PART 1 - GENERAL 1.01 SUMMARY A. This Section includes basic electrical materials and methods including: 1. Conduit, fittings and accessories. 2. Wire,
C Electrical Connection Kit
1548-4010C Electrical Connection Kit For Use With Dekoron 2700 and 2300 Family of Heating Cables Installation Instructions Kit Description The Dekoron 1548-4010C electrical connection and end seal kit
SECTION ELECTRICAL GENERAL PROVISIONS
PART 1 GENERAL 1.01 SECTION INCLUDES A. General provisions for Electrical Systems B. Wire and cable for 600 volts and less. C. Wiring connectors. D. Electrical tape. E. Heat shrink tubing. F. Wire pulling
Chapter 1 General... 5
About This Textbook...xi About the National Electrical Code...xv About the Authors and Illustrator...xix About the Team...xxi Article 90 Introduction to the National Electrical Code... 1 90.1 Purpose of
Helically wound resistance wire coil made
Ceramic Insulated CHANNEL STRIP HEATERS A Reliable Heat Source with Seamless Stainless Steel Sheath For Flat Surface Mounting Installations, Used in Hundreds Of Industrial and Commercial Heating Applications...
Piggyback Mechanical Float Switch. Piggyback Vertical Mechanical Float Switch. Piggyback Diaphragm Switch. Accessories
Piggyback Mechanical Float Switch Piggyback Vertical Mechanical Float Switch Residential sewage waste transfer RFSN-6, RFSN-9 and RFSN-10 any manual pump, up through 3/4 convert any manual pump, up hp
IDENTIFYING TRAY CABLES FOR YOUR NEXT INSTALLATION A WHITE PAPER
IDENTIFYING TRAY CABLES FOR YOUR NEXT INSTALLATION A WHITE PAPER Published 3/23/2012 T hough rapidly increasing in popularity, tray cables are still a point of confusion for many. While the term tray cable
EDS Series Factory Sealed Manual Motor Starters and Contactors Explosionproof, Dust-Ignitionproof
EDS Series Factory Sealed Manual Motor Starters and Contactors Class I, Division 1 and 2, Groups C, D Applications Manual motor starters are available to meet any plant installation requirement. They may
SN Series - Safety Shower Heaters Tankless Water Heating Solutions
36-144 kw (122,800-491,300 BTUs) Temperature overshoot purge system Lead-Free Design NEMA 4 enclosure standard ETL and cetl certified to UL and CSA Standards Liquid-Cooled Solid State Relays Internal fusing
Star Teck. Teck and Tray Cable Fittings. Table of Contents
Table of Contents The Whole Family...A2 A3 Specifications... A4 A5 Hazardous Locations CEC Classifications... A6 A9 Hazardous Locations Class, Zone and Division Certifications... A10 Quick Reference...A11
Title: YALE OFFICE OF FACILITIES PROCEDURE MANUAL Chapter: 01 - Yale Design Standard Division: Electrical Standards
Change History Date Description of Change Pages / Sections Modified Change Approver Initials 8/1/17 Updated section on Manufacturers 3 1. 6/15/16 Updated division section from 16120 to 26 05 00, - mgl44
SECTION HVAC Fans
SECTION 23 34 00 PART 1 GENERAL 1.1 SUMMARY A. Section Includes 1. The ceiling-mounted circulation fan is the model scheduled with the capacities indicated. The fan shall be furnished with standard mounting
Hose. Propane Hose. 1 X-treme Low Temp Bobtail Hose. Large Transfer Hose. Construction Tube: Cover: Reinforcement: Temp. Range:
Propane For liquid or gaseous transfer of propane. 350 lb working pressure. All sizes are UL21 and CGA Type 1 approved. Cover is pin pricked for gas dissipation. I.D O.D Spirals Lbs per ft..610.15.760.22
MaxGard. Interconnection Systems. Durability. Performance. Safety
8Russellstoll Pin and Sleeve Power Connectors Safety Different power supply ratings can t mix: 24 single-rate device polarizations ensure exact voltage, frequency and phase differentiation Safe connections:
UL Topic III. Converting European EEx Certificates. Into. North American Division Certificates
Note: While this material was originally prepared for presentation in February 1999, it has been updated to reflect the evolving technical requirements now applicable as of April 2003. UL Topic III Converting
Circulation Heaters Selection Guidelines
Selection Guidelines Selecting a Circulation Heater Application Factors Corrosion Policy Selecting the proper circulation heater component requires critical engineering judgement and careful evaluation
Installation Instructions
Installation Instructions TWSD16128PHC-UL Page 1 Introduction The TWSD16128PHC-UL is intended to be used with UL listed WLN / Networking devices both indoors and outdoors and to provide NEM 3R protection
Spare Parts List (Kits) Model Ref.:- HM35 SERIES A Spare Parts List (Kits) Issue 8 Dated 10-February-2015 Reference Drawing 09-1108-0000 Issue B Dated 07-January 2014 Drawing Ref. Part Number DESCRIPTION
ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER. IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE. READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. FOR YOUR SAFETY: Do not
EB-M*-** Midsize Electro-Boiler BL509. EB-S-**/EB-WX-**-2 TS Standard Electro-Boiler BL506. EB-CX-** TS Commercial Electro-Boiler BL508
Electro-HELPS IX Boiler, Submittal Data Sheets These provide the mechanical technical details often required for architects/design engineers, shop drawings, etc. They are also useful in providing additional
WATER SUPPLY HOOK-UP DISPLAY 0-WSH-1
WATER SUPPLY HOOK-UP DISPLAY 0-WSH-1 A wide variety of angle stops and flex connectors in all the popular sizes, ranging from 9 to 60, are included in this 4 foot display. 9 SLOT FLEX RACK 10-0001 00/00/00
Engineering Submittal Data PPRTH Patio Radiant Tube Heaters.
12288 Brawn Road 22, Wainfleet, Ontario, Canada L0S 1V0 Phone: 905-899-3473 Fax: 905-899-2262 www.easyradiantworks.com email: erw@vaxxine.com P For either indoor or outdoor installation. Not for use in
S1L Series: Metal Bottom
S1L Series: Metal Bottom Product Features and Benefits Long life element: Patented PTC heater element lasts longer than conventional heaters Will not burn out if run in air Will not burn out due to scale
PHILADELPHIA REGIONAL PORT AUTHORITY VOLUME 2 SPECIFICATIONS FOR VEHICLE PROCESSING FACILITY NAVAL BUSINESS CENTER PHILADELPHIA PA.
PHILADELPHIA REGIONAL PORT AUTHORITY VOLUME 2 SPECIFICATIONS FOR VEHICLE PROCESSING FACILITY NAVAL BUSINESS CENTER PHILADELPHIA PA Prepared By STV Incorporated 205 West Welsh Drive Douglassville, PA 19518
SUPPLEMENTAL INSTRUCTION SHEET POL S2 POINT OBSTRUCTION LIGHT SINGLE WITH ALARM
SUPPLEMENTAL INSTRUCTION SHEET POL-21004-S2 POINT OBSTRUCTION LIGHT SINGLE WITH ALARM IS21004-S2 24 April 2014 Page 1 of 4 The POL-21004-S2 is a single, steady burning obstruction light with an alarm relay
ACCESSORIES GUIDE. RobroyEnclosures.com. Market-Leading Non-Metallic Enclosure Brands
ACCESSORIES GUIDE Market-Leading Non-Metallic Enclosure Brands RobroyEnclosures.com ROBROY ENCLOSURES RobroyEnclosures.com 500 Maple Street, Belding, MI 48809 P 616.794.0700 A Robroy Enclosure Accessories
ELECTRIC COOKTOP INSTALLATION INSTRUCTIONS
INSTALLATION AND SERVICE MUST BE PERFORMED BY A QUALIFIED INSTALLER. IMPORTANT: SAVE FOR LOCAL ELECTRICAL INSPECTOR'S USE. READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. WARNING FOR YOUR SAFETY:
Discontinued. SN Series - Safety Shower Heaters Tankless Water Heating Solutions. Standard Equipment. Construction. Code Compliance and Certifications
36-144 kw (122,800-491,300 BTUs) Temperature overshoot purge system Certified Lead-Free Design NEMA 4 enclosure standard ASME and NB Certified options available Pressure Drop Advantage Dual Flow Activation
Electricity Unit Notes. Agriculture Mechanics I
Electricity Unit Notes Agriculture Mechanics I Principles of Electricity Electricity is a form of energy that can produce light, heat, magnetism, chemical changes Resistance: tendency of a material to
SDEC 2017 Questions, Group 1
SDEC 2017 Questions, Group 1 1. Do the factory wings that many fluorescent troffers have designed to fold out over the grid meet the requirements for securely fastened to the framing? Answer: NEC 410.36(B)
Industrial Fiber Optic Cables, LSZH Corrugated Armored Cable, Fibers
Features and Benefits Corrugated armor Mechanical protection Low-smoke/zero-halogen (LSZH ) sheath Key life-safety benefit Meets cyclic impact and chemical resistance test Superior performance Tray-rated
Thermal Stability Systems
Thermal Stability Systems for Oil Tank Heating Unit Model: TSSHU6002 PLEASE READ THESE INSTRUCTIONS PRIOR TO INSTALLATION. THESE INSTRUCTIONS MUST BE LEFT WITH THE USER AND SHOULD BE RETAINED FOR FUTURE
temperature Controllers
temperature Controllers Bulb and Capillary Thermostats Thermostat Styles and Selection Construction Characteristics This type of control operates by expansion and contraction of a liquid in response to
Engine Block Heater Service Kits (Tank Type) 30RZ/33RZ/45RZ (CSG 649 Ford Powered) Standby Generator Sets
TT 880 INSTRUCTIONS 7/92 Engine Block Heater Service Kits (Tank Type) 30RZ/33RZ/45RZ (CSG 649 Ford Powered) Standby Generator Sets Model Voltage Kit No. All Models 120 276380 All Models 240 276381 This
Pipe Thread Heaters. Construction Features. 1" 2-1/2" Pipe Thread Heaters
Construction Features 1" 2-1/2" Pipe Thread Heaters Element bends repressed uniformly to insure electrical insulation integrity. One piece forging of hex, thread and riser assures reliability. Element
Please FAX or completed form to FWE. KFC Pre-Installation Check Sheet Pre-Installation Information. I t w i l l h e l p u s h e l p y o u!
Pre-Installation Information Model: Units Per Location STORE INFORMATION Address: Contact Name: Phone: Store FAX: Please supply name of Preferred Area Service Agent: NOTE: FWE reserves the right to choose
Machining: Moderate to Extensive. Pattern Shop
Casting Process: Low Pressure Used for large volume quantities. Specifically suited for intricate and challenging geometric shapes, producing quality castings with consistent dimensional accuracy and superior
Circulation Heaters Selection Guidelines
Selection Guidelines Selecting a Circulation Heater Application Factors Corrosion Policy Selecting the proper circulation heater component requires critical engineering judgement and careful evaluation
UL Electrical Equipment for Measurement, Control, and Laboratory Use; Part 1: General Requirements, Second Edition
File E315190 Project 07CA39477 March 5, 2008 REPORT on PROCESS CONTROL EQUIPMENT FOR USE IN HAZARDOUS LOCATIONS Litre Meter Ltd. Buckinghamshire, England Copyright 2008 Underwriters Laboratories Inc. Underwriters
CIRCUIT BREAKER UNIT ENCLOSURES 10,000/25,000 AMPERES INTERRUPTING CAPACITY. UPC Code. Catalog Number
CIRCUIT BREAKER UNIT ENCLOSURES 10,000/25,000 AMPERES INTERRUPTING CAPACITY Circuit Breaker Unit Enclosures TABLE 2-14. CIRCUIT BREAKER UNIT ENCLOSURES Main Circuit Breaker Unit Enclosure Encl. Flush Cover
Installation Instructions
Installation Instructions Ordering Code: RF32UQT1XX PLEASE READ THESE INSTRUCTIONS BEFORE INSTALLATION OF THE FOLLOWING: 4 STRIP FIXTURES 8 STRIP FIXTURES HARDWIRE 4 STRIP FIXTURES WRAP FIXTURES TROFFER
Installation and Maintenance Instructions
Commercial & Industrial Positive Pressure or Condensing AL 29-4C Stainless Steel High Challenge Special Gas Vent Also for Natural Draft Appliances 3",4",5",6",7",8",9",10" and 12" Diameter Special Gas
Code Master Factory Sealed Strobe Luminaires Explosionproof, Dust-Ignitionproof
Code Master Factory Sealed Strobe Luminaires Lighting Lighting: Explosionproof Visual Signal Applications Code Master Explosionproof Strobe fixtures are designed to provide safe operation in the presence
READ ALL DIRECTIONS CAREFULLY BEFORE BEGINNING INSTALLATION
INSTRUCTIONS REPAIR PARTS LIST AND WARRANTY INFORMATION WPO17E, WPO17N MPO17E, MPO17N POLY, ELECTRIC DRINKERS READ ALL DIRECTIONS CAREFULLY BEFORE BEGINNING INSTALLATION! WARNING! 1. INSTALLATION MUST
MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING
SECTION 221123 - DOMESTIC WATER PUMPS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following all-bronze and bronze-fitted centrifugal pumps for domestic cold- and hot-water circulation: 1.
Technical Specification VFD
Technical Specification - 3-6 VFD Pilot valve enclosures suitable for use in hazardous certified environments. These enclosures are designed and tested to contain both flame and the ignition of dust and
IMPORTANT INSTRUCTIONS READ & SAVE THESE INSTRUCTIONS. Electric Wall Panel. Owner s Manual & Installation Instructions L
Electric Wall Panel Owner s Manual & Installation Instructions 8 Element Wall Panel Front View 8 & 6 Element Wall Panel Side View 6 Element Wall Panel Back View Top 23 1 8 EWP 8 EWP 6 Bottom 17 1 4 2 3
CNA-Series - Large Industrial Heaters Tankless Water Heating Solutions
36-144 kw (122,800-491,300 BTUs) Certified Lead-Free Design New & Improved Pressure Drop Advantage Variable Temp Heat Exchanger NEMA 4 enclosure standard Independent Safeties ETL and cetl certified to
DET-TRONICS SPECIFICATION DATA. Eagle Quantum EQ2200UVHT For Use With C7050B Continuous Duty High Temperature UV Flame Detector DESCRIPTION
DET-TRONICS SPECIFICATION DATA Eagle Quantum EQ2200UVHT For Use With C7050B Continuous Duty High Temperature UV Flame Detector DESCRIPTION The EQ2200UVHT UV Flame Detector is used with the Eagle Quantum
TECHNICAL ASSISTANCE TOLL FREE TELEPHONE NUMBER TECHNICAL ASSISTANCE FAX:
ACORN SAFETY P.O. BOX 3527 CITY OF INDUSTRY, CA 91744-0527 UNITED STATES OF AMERICA WWW.ACORNSAFETY.COM INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS ELECTRIC ALARM WITH LIGHT AND HORN Models S0000-AL1
Cascade Premier and Elite Premier Bathing Systems with Aqua-Aire Installation / Assembly Instructions
Cascade Premier and Elite Premier Bathing Systems with Aqua-Aire Installation / Assembly Instructions Premier Elite Premier PENNER PATIENT CARE, INC Box 523 / 102 Grant St. Aurora, NE 68818 360745P Revision
Barnes Oil Sensor Switch
Elevator sump basins Transformer vaults Leachate wells Garages Barnes BOSS Barnes Oil Sensor Switch Model BOSS BOSS PLUS RPM 3450 3450 Oil Water Switch Cord Length 10 10 Enclosure Rated Options Automatic
TABLE OF CONTENTS CHAPTER 2 WIRING AND PROTECTION CHAPTER 1 GENERAL RULES... 19
TABLE OF CONTENTS About This Textbook...xi How to Use the National Electrical Code... 1 Article 90 Introduction to the National Electrical Code... 7 90.1 Purpose of the NEC... 7 90.2 Scope of the NEC...
READ ALL DIRECTIONS CAREFULLY BEFORE BEGINNING INSTALLATION
INSTRUCTIONS REPAIR PARTS LIST AND WARRANTY INFORMATION WPO25E, WPO25N MPO25E, MPO25N POLY, ELECTRIC DRINKERS READ ALL DIRECTIONS CAREFULLY BEFORE BEGINNING INSTALLATION Ref. Part No. No. Description Qty
Moon Visions Lighting
Moon Visions Lighting 2018-2019 Product Guide Quality lighting since 2008 214.393.7407 www.moonvisionslighting.com New Light Bar Series! UL Listed under UL Standard 1598 Certified to CSA Standard 1668
INSTALLATION INSTRUCTIONS Model FH-2071-UM Enclosure
INSTALLATION INSTRUCTIONS Model FH-2071-UM Enclosure Enclosure INTRODUCTION The Model FH-2071-UM Enclosure from., used in Marine applications is robust and weather-resistant. Its durable design is customized
SECTION CUSTOM FABRICATED LABORATORY EQUIPMENT. This section specifies necropsy // dissecting tables // and // animalcage
PART 1 - GENERAL 1.1 DESCRIPTION SECTION 11 53 61 CUSTOM FABRICATED LABORATORY EQUIPMENT SPEC WRITER NOTES: 1. Delete between // // if not applicable to project. 2. Also, delete other items or paragraphs
ULTRA DYNAMIC HOSE PRODUCTS HOSE & TUBING CATALOG 2018 A DIVISION OF UBBER MPANY, INC. RUBBER COMPANY, INC RUBBER COMPANY, INC.
ULTRA DYNAMIC HOSE PRODUCTS HOSE & TUBING CATALOG 2018 A DIVISION OF RUBBER COMPANY, INC. UBBER MPANY, INC. RUBBER COMPANY, INC Hose assemblies fabricated to customer requirements - our specialty. Let
1-866-PENNERS
Cascade Premier and Elite Premier Bathing Systems with Aqua-Aire Installation / Assembly Instructions Premier Elite Premier PENNER PATIENT CARE, INC Box 523 / 102 Grant St. Aurora, NE 68818 360745P Revision
WATER HEATER SOLUTIONS
WATER HEATER SOLUTIONS WATER HEATER SOLUTIONS FLEXIBILITY FOR MAKING A CLEAN INSTALL IN ANY SPACE In most residential and commercial environments, the water heater is virtually always out of sight, but
Heavy Industrial/Marine MaxGard
6 Heavy Industrial/Marine MaxGard MaxGard Interconnection Systems Overview Defined Any application where electrical connections need protection from water and/or dust ingress to contacts or wiring compartment
Installation Instructions
Installation Instructions TWSD16128PHC Version 1.1 - Page 1 Introduction The TWSD16128PHC is intended to be used with WLN / Networking devices. The TWSD16128PHC is intended to be used both indoors and
REFLECTOR PANS FOR HINGED ELEMENTS CONNECTOR BLOCK KIT TRIM RINGS FOR ABOVE PANS CONNECTOR BLOCK RANGE CORD REFLECTOR PANS FOR PLUG-IN ELEMENTS
*s are Subject to Change without Notice.* REFLECTOR PANS FOR HINGED ELEMENTS Heavy Chromed Steel Description 2-1040 6" UNIVERSAL $2.19 2-1041 8" UNIVERSAL $2.89 2-1050 6" GE/HOTPOINT $2.39 2-1051 8" GE/HOTPOINT