AGC-4, GPC-3, GPU- 3 and GPC 2g with the option Al

Transcription

1 Tiff NOCE) ) Component Certificate DEW A/S Frisenborgvej Skive, Danemark Type of unit Protection device Description of unit AGC-4, GPC-3, GPU- 3 and GPC 2g with the option Al Technical data Measuring voltage UAC Z." V AC Measuring current /Ac = -/1 or -/5 A AC Measuring frequency f = Hz Standards VDE-AR-N 4105 Generators connected to the low-voltage distribution network 08I2011 Technical requirements for the connection to and parallel operation with low-voltage distributionnetworks Additional standards DIN VDE V Grid integration of generator plants Low-voltage Test requirements for generator units to be connected to and operated in parallel with low-voltage distribution networks The above component complies with the requirements of the above standards. Further technical data are placed in annex 1 (4 Pages). Registration no Valid Assessment report no from to M Michael Fuchs TON/ NORD CERT GrnbH T Langemarckstrafle Essen technology@tuev-nord.de ((DAkkS Akkreditierungsstelle

2 ANNEX Annex 1, Page 1 of 4 Schematic structure...a, gr.o. lr Idly 4$ Michael Fuchs TON/ NORD CERT GmbH Langemarckstrage Essen technology@tuev-nord.de ll DAkkS Akkrectitierungsstelle

3 Tu'V NOC-11) ) ANNEX Annex 1, Page 2 of 4 General description Technical data General Type AGC-4 GPC-3 GPU-3 GPC-2g Option Al (Mains protection) Software version Release Release Release Release Aux. supply 8 36 VDC Measuring channel Measuring voltage Measuring current Measuring frequency V AC -/1 or -/5 A AC Hz Adjustment range of protection parameters Over voltage Under voltage Over frequency value 100% % U. 100% % U, Ti me 0-99,99 s Max 320 s value 40% - 100% U. 15% - 100% U, Time 0-99,99 s Max 320 s value 100% % U. 100% % U, Time 0-99,99 5 Max Under frequency value 80% % U. 80% % U. Time 0-99,99 s Max 320 s M. Michael Fuchs T Langemarckstralle Essen technology@tuev-nord.de ll DAkkS Akkreditierungsstelle 0-ZE

4 TuV NOIC) ) ANNEX Annex 1, Page 3 of 4 Notes about the certificate The manufacturer has proven certification of its quality management system according to ISO The manufacturer confirmed the in a manufacturer declaration that the certification of the management system will be valid parallel to the period of this component certification. Additional technical data, according DIN VDE V in annex A, are given in assessment report number (version 1.0 or higher). The use of other firmware and software version numbers is allowed if the differences are proved and confirmed by TOV NORD CERT GmbH beforehand. Validity of a new software version is attested by written confirmation and becomes part of the certificate. The following protection functions were a part of the conformity assessment. Over and under voltage Over and under frequency Connection to the grid Hardware fault tolerance of 1 Restriction of the certificate The protection functions of control and protection devices AGC-4, GPC-3, GPU-3 and GPC 2g was evaluated according to the VDE AR-N Control functions were not a part of the assessment M E. Michael Fuchs TO/ NORD CERT GmbH Langemarckstralle Essen technology@tuev-nord.de DAlckS Rkkreditierungsstelle

5 ANNEX Annex 1, Page 4 of 4 Remarks from the assessment The control GPC-2g has a wider setting rang down to 15% Un. Only the setting range 40 G/0 Un to 100 % Un is approved. Smaller setting has to been checked separately. Non-conformities from the assessment Obligations to fulfill the requirements Appendix to the certificate M Michael Fuchs TO/ NORD CERT GmbH Langemarckstral?e Essen technology@tuev-nord.de DAkkS Akkreditierungsstelle

6 TuVNORD Certification TON/ NORD CERT GmbH P.O. Box Essen Germany DEIF A/S Mr. Jesper Flyvholm Frisenborgvej Skive, Denmark T Langemarckstrasse Essen Germany Phone: Fax: Info.tncert@tuev-nord.de TUV Our! Your Reference Contact Direct Dial Date Phone: Fax: Recognition of new software version Dear Mr. Flyvholm, After the assessment of your documents we inform you, that the following software versions AGC 200 GPC 2G New Software Version: Release Release Old Software Version: Release Release are accepted for the component certificate according to the BDEW medium voltage guideline (registration no ) and for the component certificate according to the VDE AR-N 4105 (registration no ). According to your documents no influence is expected on the certified protection functions of the protection units by the changes in the software. Others influence to functions not covered by the above mentioned certificates have not been part of the assessment. Best regards, T, Division Technology 414 Malte Ber' aus AO Headquarters T LangemarckstraRe Essen Phone: Fax: infatncerl@tuey-norcide nord-cert corn Director Registration Office Dipl -Volksw. Ulf Theike (Spokesman) Amtsgericht Essen Dipl. -Ing. Wolfgang WielpUtz HRB 9976 VAT No.: DE Tax No.: 111/5706/2193 Bank AG, Essen Bank Code: Account No BIC (SWIFT-Code) DEUTDEDE IBAN-Code: DE TUV NORD GROUP Page 1 of 1