ARGE Guideline - Part 3 "System functionality fire detection and fire fighting systems in rolling stock"
|
|
- Collin Chase
- 6 years ago
- Views:
Transcription
1 "System functionality fire detection and fire fighting systems in rolling stock" Functional proof for detection and control of system Rev. No. Date Responsible Comment /11/2009 ARGE Adoption /09/2012 ARGE Update This guideline is the result of a cooperation of the Detection Technology Consortium (ARGE) comprising the following companies: Title: ARGE-Part 3 Revision: 2.0 Valid from: 17/09/2012 Page 1 of 12 ID No.: TÜV SÜD Rail_RW Creator: ARGE Creation Date: 19/06/2012 Phone: +49 (0) Fax: +49 (0) Juergen.heyn@tuv-sued.de TÜV SÜD Rail GmbH Ridlerstraße Munich Germany
2 List of Contents 1 GENERAL Preface Field of Application Reference to regulations Area of Validity SYSTEM SPECIFICATION AND CONCEPTIONAL DESIGN SPECIFICATION FOR THE ASSESSMENT PROCESS Basic function of alarm Basic function system operation Assessment procedure Maintaining the function EDITING AND REVISION OF THE GUIDELINES... 9 APPENDIX 1 - REGULATIONS APPENDIX 2 - PARTICIPANTS OF THE CONSORTIUM (ARGE) Document: ARGE-Guideline_Part-3_Sys_Func_Fire_Detect_and_Fire_Fight_Rollg_Stock_V-2.doc Page 2 of 12
3 1 General This guideline serves specifying the functionality and of the safety and reliability characteristics of fire detection, fire fighting and fire extinguishing systems. The focus is on the design and correct system function of the interaction of the respective system technology with the control devices, including alarms. This guideline sets minimum requirements for the system technology up to the system interfaces to the rail vehicle, including control and data communication (e.g. for alarm and fault messages). Measures to minimize external influences (e.g. resistance to vandalism or operationally induced environmental conditions) as well as reliability, availability and maintainability are not part of this guideline. For these aspects, reference is made to EN Note: The requirements for system reliability result from the requirement specification of the vehicle manufacturer. To ensure system reliability, the manufacturer's instructions have to be followed. By using the ARGE Guideline Part 3, ARGE Guideline Part 1 ARGE Guideline Part 2 have to be considered. 1.1 Preface The Technical Specifications for Interoperability (TSI), the current codes of practice and the future European standard EN include requirements for the installation of fire detection systems. Partyl requirements for assessment procedures are also included in the EN Thereby the purpose of EN is defining requirements for rolling stock in terms of running capability in case of fire. The ARGE Guideline, however, focuses on the safety objective "Safety of Persons". Thus, the assessment procedures are more conservative compared to the standard requirements of EN (requirements of running capability in the event of a fire on board railway vehicles). To provide complete planning certainty for the installation of fire detection systems in rolling stock, system specific requirements for design, construction and assessment are needed. This guideline identifies the required criteria for the practical assessment. Document: ARGE-Guideline_Part-3_Sys_Func_Fire_Detect_and_Fire_Fight_Rollg_Stock_V-2.doc Page 3 of 12
4 Objectives On the basis of the safety objectives defined in laws, guidelines and codes of practice, a fire event shall be detected and fought already in an early fire development phase. The objective of this Guideline is the alignment of functional requirements to ensure the implementation of the protection objectives concerning the system properties which are described in the rolling stock's fire protection concepts. When this Guideline's requirements are regarded within the system design, it can be assumed that sufficient measures for limiting fire risks below a tolerance threshold have been taken into account. The design criteria defined in the Guideline are the basis for final type testing or acceptance tests of the whole system "fire detection system" or "fire detection, fire fighting, fire extinguishing system". Project management e.g. according to the International Railway Industry Standard (IRIS), Rev. 02, 2009, and the development of a system concept in accordance with EN (V model) is presumed. Acceptance The Guideline is accepted by the regulatory authorities of Germany (Federal Railway Authority - EBA), Austria (Federal Ministry for Transport, Innovation and Technology - BMVIT) and Switzerland (Federal Office of Transport - BAV). In addition, via the crossacceptance process for vehicle registration, the Guideline is being applied Europewide. The Guideline already is accepted in many countries as acknowledged code of practice. 1.2 Field of Application This Guideline helps for designing and proofing the functionality of fire detection, fire fighting and fire extinguishing systems. The proof of function and type test and/or the conformity assessment must be carried out by an officially acknowledged expert in the field of rolling stock in cooperation with the vehicle manufacturer and the system manufacturer, so that a confirmed audit trail is present for the operational approval of the vehicle/train as well as for further certifications (e.g. within the scope of the Technical Specification Interoperability TSI). The specification and implementation of the type test according to EN is the vehicle manufacturer's responsibility. The system supplier has to grant the necessary support. Document: ARGE-Guideline_Part-3_Sys_Func_Fire_Detect_and_Fire_Fight_Rollg_Stock_V-2.doc Page 4 of 12
5 1.3 Reference to regulations In this Guideline, regulations are not mentioned in detail. The standards listed in Appendix 1 have to be regarded when defining the necessary requirements. Further regulations are stated in chapter 2 of this ARGE Guideline. 1.4 Area of Validity This Guideline is valid for application in railway vehicles and track bound vehicles, which are equipped with fire detection, fire fighting and/ or fire extinguishing systems. This Guideline may also be used for comparable technical systems (e.g. buses). Document: ARGE-Guideline_Part-3_Sys_Func_Fire_Detect_and_Fire_Fight_Rollg_Stock_V-2.doc Page 5 of 12
6 2 System specification and conceptional design A design and realization according to the current codes of practice is presumed in the following. The following functional requirements for the interfaces between system and rail vehicle shall be specified by the vehicle manufacturer and shall be adopted by the system manufacturer in the technical implementation and documentation: Definition of safety classification or more extensive system functionalities with respect to the ARGE Guideline by the vehicle manufacturer or operator (Recommendation: Expert assessment of the classification). Definition of energy supply, depending, among other things, on the system's safety classification in compliance with the vehicle-related and system-specific system design. Definition of environmental conditions relating to the installation situation and to the functional requirements with respect to the defined environmental conditions, e.g. on the basis of the temperature classification according to EN Definition of reliability and availability requirements at the system level with respect to the vehicle specifications. Information on the maintenance intervals (inspection, maintenance, preventive replacement of components) defined for the vehicle type. The lengths of the intervals have to be defined according to the requirements for the respective rail vehicle. Definition of on-board external and internal interfaces (e.g. human-machine interfaces (HMIs), such as displays, audio systems) for signal or state transmission concerning - operation and fault reporting, - alarm within the vehicle or compartments and/ or outside the vehicle, - active control of on-board components (such as air treatment equipment, end doors, shut-down of technical facilities). Generally, impacts of fire detection software or system control software on safetyrelated equipment of the vehicle or train must be prevented (e.g. in signal transmissions on the vehicle's data bus). The assessment of the defined RAM parameters must be carried out in accordance with EN Document: ARGE-Guideline_Part-3_Sys_Func_Fire_Detect_and_Fire_Fight_Rollg_Stock_V-2.doc Page 6 of 12
7 The ARGE Guideline defines minimum requirements. In addition, further countryspecific requirements concerning technical and functional design of the system equipment have to be regarded, if available. Note: Based on the fire protection concept, the vehicle manufacturer specifies the requirements for the system manufacturer concerning alarm and control of further technical equipment in the vehicle. The vehicle manufacturer has to consider the codes of practice. Document: ARGE-Guideline_Part-3_Sys_Func_Fire_Detect_and_Fire_Fight_Rollg_Stock_V-2.doc Page 7 of 12
8 3 Specification for the assessment process The following specifications relate to the proof of system functionality, which will be documented and tested within the type test. 3.1 Basic function of alarm The following requirements for the alarm are defined: The fire alarm must be transmitted to the staff (driver and/or train staff) visually and acoustically, according to the operating concept. A local alarm has to be signalized in the passenger area when a limited noticeability of a fire by the passengers can be assumed. In sleeping or couchette cars, in double-deck coaches and in WCs, an acoustic signal has to be provided; in sleeping and couchette cars additionally a visual signal. The driver has to be informed about the triggering of a fire fighting or fire extinguishing system (e.g. in connection with the shutdown of devices affected by the fire). For transmission to the leading vehicle, alarm messages may be combined. 3.2 Basic function system operation The following points are required for the technical facilities: Monitoring of system state, signal output concerning operation, transmission to interface required for the vehicle's unlimited operation Monitoring of system state, signal output concerning potential faults in the system, transmission to interface limited operation is still possible, or operation state is withdrawn Monitoring of system state, signal output of fire alarms, transmission to interface Basis for subsequent operational processes according to the vehicle operator's instructions for staff Internal processing of the alarm signal and providing the signal at the interface for possible external switching operations For transmission to the leading vehicle, fault messages may be combined. Document: ARGE-Guideline_Part-3_Sys_Func_Fire_Detect_and_Fire_Fight_Rollg_Stock_V-2.doc Page 8 of 12
9 The term "interface" includes monitors, visual and acoustic warning devices and, in individual cars, also the connections of data lines. 3.3 Assessment procedure The defined and implemented functionalities have to be proved as follows: For individual vehicles, the proof has to be provided at least at the interface to the adjacent vehicle and at the defined alarm and fault indicators/displays in the vehicle. In vehicles not separable for operation, the proof has to be provided at the defined alarm and fault indicators/displays. 3.4 Maintaining the function The monitoring requirement has to be realized in accordance with DIN EN 54-2 (affects fire alarm central control panels) and DIN EN (affects gas extinguishing systems), as far as required for rail vehicles. For ensuring the function during operation, the system has to be checked and maintained in accordance with the instructions written by the system manufacturer. The transmission of alarms and fault messages requires the disclosure of errors in data transmission between the individual components. This concerns the following data paths: between fire detection and fire alarm central control panel between fire detection or fire alarm central control panel and fire fighting or fire extinguishing system between the above subsystems and electrical control equipment and (where available) alarm devices The operation state ready is achieved when the data transmission path, starting from the interface between fire detection and/ or fire fighting up to the defined alarm and fault display, properly and when the state is monitored. Note: The monitoring of the on-board alarm and fault transmission has to be ensured by the vehicle manufacturer. 4 Editing and Revision of the Guidelines Changes and updates to the Guidelines will be carried out by the ARGE consortium as a result of technical discussions and exchange of experience, only. Latest information and insights related to the application of the guidelines will be considered. Document: ARGE-Guideline_Part-3_Sys_Func_Fire_Detect_and_Fire_Fight_Rollg_Stock_V-2.doc Page 9 of 12
10 The leading supervision of the editorial work is made by TÜV SÜD. The 4-eye principle is guaranteed by TÜV NORD. The certified quality assurance systems of the companies are applied. An annual update of the Guideline is planned. Editorial work: TÜV SÜD Rail GmbH TÜV NORD Systems GmbH & Co.KG Ridlerstraße 57 Große Bahnstraße 31 D Munich D Hamburg Document: ARGE-Guideline_Part-3_Sys_Func_Fire_Detect_and_Fire_Fight_Rollg_Stock_V-2.doc Page 10 of 12
11 Appendix 1 - Regulations /R-1/: CEN TS Railway applications Fire protection on railway vehicles, Part 6 "Fire control and management systems" resp. EN (expected in February 2013) Note: Chapter indicates in which vehicle areas stationary systems have to be installed, with respect to the operating category (Field of application and vehicle type). Special requirements for the process of functional proofing are not included. /R2/: DIN EN "Railway applications - The specification and demonstration of Reliability, Availability, Maintainability and Safety (RAMS)", (March 2000) /R-3/: DIN EN 54 Fire alarm systems Fire alarm control panels (December 1997) /R-4 / /R-5/: /R-6/: /R-7/ /R-8/ DIN EN Fixed fire fighting systems components for fire extinguishing systems using gaseous extinguishing agents - Requirements and test methods for automatic electrical control and delay devices (September 2006) DIN EN Railway applications - Electronic equipment used on rolling stock (January 2004) DIN VDE Alarm systems for fire, intrusion and hold-up - general requirements (September 2009) EN Railway applications - Communication, signaling and processing systems Safety-related communication in transmission systems (September 2010) EN Railway applications- Requirements for running capability in case of fire on board of rolling stock (February 2012) /R-9/ TSI SRT (2008/163/EC) Safety in Railway Tunnels in the trans-european conventional and high-speed rail system (July 2008) Document: ARGE-Guideline_Part-3_Sys_Func_Fire_Detect_and_Fire_Fight_Rollg_Stock_V-2.doc Page 11 of 12
12 Appendix 2 - Participants of the consortium (ARGE) Company AOA Apparatebau Gauting GmbH AQUASYS Technik GmbH DETECTOMAT GmbH FOGTEC Brandschutz GmbH & Co. KG HEKATRON Vertriebs GmbH IME Elektrotechnik GmbH KIDDE-DEUGRA Brandschutzsysteme GmbH MARIOFF Corporation Oy RWS Railway Service GmbH WAGNER Bayern GmbH TÜV NORD Systems GmbH & Co. KG TÜV SÜD Rail GmbH Domain Expert Mr. Weber Mr. Biberauer Mr. Müller Mr. Dirksmeier Mr. Behrens Mr. Langbein Mr. Kacar Mr. Valkohaapa Mr. Fenske Mr. Kainz Mr. Thiel Dr. Heyn Consortium meetings Time Place First consultation - Kick-Off and formulation of ARGE 19/11/2009 Ahrensburg Second consultation - Revision (Rev. 02) 19/06/2012 Berlin Document: ARGE-Guideline_Part-3_Sys_Func_Fire_Detect_and_Fire_Fight_Rollg_Stock_V-2.doc Page 12 of 12
ARGE Guideline - Part 1 "Fire detection in rolling stock"
"Fire detection in rolling stock" Functional proof procedure for the positioning of fire detectors in rooms accessible to persons, in Guideline / Inspection Procedure Rev. No. Date Responsible Comment
More informationARGE Directive Fire Detection in Rolling Stock
Fire Detection in Rolling Stock Procedure for the proof of function concerning the placement of fire detectors in rooms accessible to people, electric control cabinets and areas of Guideline / Inspection
More informationRecent European and national German regulations for. measures
Fire safety concepts and risk analysis in rolling stock Recent European and national German regulations for railway vehicles and the acceptance of compensation measures IFAB 4 Different Business Units
More informationITALIAN STANDARD UNI 11565
ITALIAN STANDARD UNI 11565 Consequences on Designing, Testing and Maintaining of Fire Protection Systems in Italy Dr. Markus Mueller WAGNER Bayern GmbH railsystems@wagner.de Agenda 1. Introduction About
More informationFOGTEC Rail Systems. Rolling Stock Applications. Fire Protection Solutions from one source. Experts in Fire Protection
Fire Protection Solutions from one source FOGTEC Rail Systems Rolling Stock Applications Warszawa, 25.06.2014 1 Warszawa, 25.06.2014 From concept design to validation and verification: case study of a
More informationFire Detection and Fire Fighting Testing and Approval on Railway Vehicles
Fire Detection and Fire Fighting Testing and Approval on Railway Vehicles Peter Stahl Wagner Schweiz AG, Wallisellen, Switzerland Abstract Fire detection system and firefighting solutions are getting a
More informationA Study into the Standardization of Using Fire Detectors in Rail Vehicles for China
Available online at www.sciencedirect.com Procedia Engineering 52 ( 2013 ) 240 244 A Study into the Standardization of Using Fire Detectors in Rail Vehicles for China LIU Xiao-lu *, WANG Wen-qing Shenyang
More informationdesigned for rail 5000 Series
designed for rail 5000 Series 5000 Series The only complete SIL system 20 years of experience in the field. More than 15.000 systems supplied worldwide. A team devoted to rolling stock projects with specialized
More informationOfficial Journal of the European Union C 97/11
16.4.2010 Official Journal of the European Union C 97/11 Commission communication in the framework of the implementation of the Council Directive 96/48/EC of 23 July 1996 on the interoperability of the
More informationFOGTEC Rail Systems. Rolling Stock Applications. Fire Protection Solutions from one source. Leading in Fire Protection. designed for rail 1
Fire Protection Solutions from one source FOGTEC Rail Systems Rolling Stock Applications designed for rail 1 Trends and Developments in Fire Experts in Water Mist Protection for Rolling stock a global
More informationfulfils all requirements for extended protection of the criteria catalogue The appendix is part of the certificate and consists of 4 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Beiersdorf Shared Services GmbH Quickbornstraße 24 20253 Hamburg, Germany to confirm that its security
More informationfulfils all requirements for high protection of the criteria catalogue The appendix is part of the certificate and consists of 5 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Wincor Nixdorf International GmbH Heinz-Nixdorf-Ring 1 33106 Paderborn, Germany DC4 to confirm that
More informationFOGTEC Rail Systems. Rolling Stock Applications. Fire Protection Solutions from one source. Experts in Fire Protection
Fire Protection Solutions from one source FOGTEC Rail Systems Rolling Stock Applications Modern Trends of Fire Protection in Rolling Stock 2014 designed for rail Warsaw, 25 1 Smart Concepts using innovative
More informationON-TRACK FOR TAILORED FIRE PROTECTION. Future-proof fire protection solutions for rail vehicles
ON-TRACK FOR TAILORED FIRE PROTECTION Future-proof fire protection solutions for rail vehicles Fire detection systems Extinguishing systems Water mist systems Challenges FIRE PROTECTION IN RAIL VEHICLES.
More informationControl and Indicating Equipment
VdS Guidelines for Fire Detection and Fire Alarm Systems VdS 2540en Requirements and Test Methods VdS 2450en : 2018-12 (03) Publisher and publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174
More informationFIRE CONTAINMENT AND CONTROL SYSTEMS
FIRE CONTAINMENT AND CONTROL SYSTEMS III INTERNATIONAL CONFERENCE MODERN TRENDS OF FIRE PROTECTION IN ROLLING STOCK WARSAW 2016-05-18 AUTHORS: SERGE MÉTRAL (SNCF) CONVENOR OF CEN TC256 WG1 GUILLAUME CRAVEUR
More informationFOGTEC Rail Systems. Rolling Stock Applications. Fire Protection Solutions from one source. Leading in Fire Protection
Fire Protection Solutions from one source FOGTEC Rail Systems Rolling Stock Applications The Smarter Way of Fire Fighting 1 TUNNEL FIRE PROTECTION Tel Aviv, 4th April 2016 Michele Barbagli Area Sales Manager
More informationCOMMISSION IMPLEMENTING REGULATION (EU) /... of XXX. on the European Rail Traffic Management System European deployment plan
EUROPEAN COMMISSION Brussels, XXX [ ](2016) XXX draft COMMISSION IMPLEMENTING REGULATION (EU) /... of XXX on the European Rail Traffic Management System European deployment plan EN EN COMMISSION IMPLEMENTING
More informationKnorr-Bremse Group. Presentation of EDT101. Working Group on Derailment Detection Rome, October 13 th 15 th, Knorr-Bremse Group
Knorr-Bremse Group Presentation of EDT101 Working Group on Derailment Detection Rome, October 13 th 15 th, 2014 Knorr-Bremse Group Motivation for the Development of Derailment Detectors In the 1990s there
More informationCEN standardization work on refrigerating systems, especially standard EN 378
CEN standardization work on refrigerating systems, especially standard EN 378 Carsten Hoch Head of Refrigeration TÜV SÜD Industrie Service GmbH Ridlerstrasse 65, 80339 Munich carsten.hoch@tuev-sued.de
More informationSafely into the Future. PINTSCH BAMAG.
Safely into the Future. PINTSCH BAMAG. The Company Ulrich Rink Status: August 2012 Schaltbau Holding Group Business Segments Mobile Transportation Technology Bode-Group Schaltbau Holding AG Stationary
More informationProcedure for the Approval of New Fire Detection and Alarm Technologies
VdS Guidelines for Automatic Fire Detection and Fire Alarm Systems VdS 3469en Procedure for the Approval of New Fire Detection and Alarm Technologies VdS 3469en : 2016-01 (01) Publisher and publishing
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Arthur van Schendelstraat 600 3511 MJ Utrecht The Netherlands Location Certification Scheme (TRRC-NL) Arthur van Schendelstraat
More informationAvailability, Reliability, False Alarm Resistance Best Practice in Fire Alarm Systems. FIRE PROTECTION OF ROLLING STOCK 2 rd March 2017
Availability, Reliability, False Alarm Resistance Best Practice in Fire Alarm Systems FIRE PROTECTION OF ROLLING STOCK 2 rd March 2017 1. Introduction 1905 Compagnie des Wagons-Lits 2000 Rail Services
More informationBRL-K21030/02 5 August Certification of Alarm Communication. Certification Alarm Transmission Systems (ATS) Alarm Transmission Systems
5 August 2014 Certification of Alarm Communication Certification (ATS) Kiwa N.V. - 1-5 Augustus 2014 Preface This Evaluation Guideline (Certification Scheme) has been accepted by the Kiwa Board of Experts
More informationFailure Modes, Effects and Diagnostic Analysis
Failure Modes, Effects and Diagnostic Analysis Project: Detcon FP-700 Combustible Gas Sensor Customer: Detcon The Woodlands, TX USA Contract No.: DC 06/08-04 Report No.: DC 06/08-04 R001 Version V1, Revision
More informationJonathan Redding Area Sales Manager FOGTEC Fire Protection Cologne, Germany
Making rail systems more efficient by using on-board Fire Protection Systems Jonathan Redding Area Sales Manager FOGTEC Fire Protection Cologne, Germany Key Presentation Take-Aways Holistic approach to
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 14750-1:2006 Railway applications - Air conditioning for urban and suburban rolling stock - Part 1: Comfort parameters Railway applications - Air conditioning for urban and suburban
More informationRailway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems
Irish Standard I.S. EN 50159:2010 Railway applications - Communication, signalling and processing systems - Safety-related communication in transmission systems NSAI 2010 No copying without NSAI permission
More informationCERTIFICATE of Product Conformity (QAL1 )
ATÜVRheinland'ä ' Prcciscly Ftight. CERTIFICATE of Product Conformity (QAL1 ) Certificate No.: 0000056508_01 AMs designation: Manufacturer: Test Laboratory: LDS 6 7M86121 with cd 6 7M86122 sensorfor NH3
More informationFire protection of emergency electrical devices: effect on the level of risk a case study of a rail tunnel
Safety and Security Engineering VI 73 Fire protection of emergency electrical devices: effect on the level of risk a case study of a rail tunnel M. Lombardi & G. Rossi Dipartimento di Ingegneria Chimica
More informationAustralian Standard. Safeguarding of machinery
AS 4024.2 1998 Australian Standard Safeguarding of machinery Part 2: Installation and commissioning requirements for electro-sensitive systems Optoelectronic devices This Australian Standard was prepared
More informationAS/NZS 3820:2009 (Incorporating Amendment 1) Essential safety requirements for electrical equipment
AS/NZS 3820:2009 (Incorporating Amendment 1) Essential safety requirements for electrical equipment AS/NZS 3820:2009 This Joint Australian/New Zealand Standard was prepared by Joint Technical Committee
More informationSpark Extinguishing Systems
VdS Guidelines for VdS 2518en Requirements and Test Methods VdS 2518en : 2008-08 (01) Publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174 50735 Köln, Germany Phone: +49 221 77 66 0; Fax:
More informationISO INTERNATIONAL STANDARD. Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies
INTERNATIONAL STANDARD ISO 14557 First edition 2002-12-01 Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies Tuyaux de lutte contre l incendie Tuyaux d aspiration et flexibles en
More informationAS/NZS :2009. Performance of household electrical appliances Refrigerating appliances AS/NZS :2009
AS/NZS 4474.2:2009 (Incorporating Amendment Nos 1 and 2) Australian/New Zealand Standard Performance of household electrical appliances Refrigerating appliances Part 2: Energy labelling and minimum energy
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2017/C 435/04)
15.12.2017 EN Official Journal of the European Union C 435/93 Commission communication in the framework of the implementation of the Directive 2008/57/EC of the European Parliament and of the Council on
More informationCOMMISSION DELEGATED REGULATION (EU) No /.. of
EUROPEAN COMMISSION Brussels, 4.3.2015 C(2015) 1365 final COMMISSION DELEGATED REGULATION (EU) No /.. of 4.3.2015 amending Delegated Regulation (EU) No529/2014 supplementing Regulation (EU) No 575/2013
More informationFINDINGS FROM FIRE TESTS IN TUNNEL CONSTRUCTIONS WITH VENTILATION SYSTEMS AND FIXED FIRE SUPPRESSION SYSTEMS
- 203 - FINDINGS FROM FIRE TESTS IN TUNNEL CONSTRUCTIONS WITH VENTILATION SYSTEMS AND FIXED FIRE SUPPRESSION SYSTEMS Hofer R., IBS Institute for Technical Fire Protection and Safety Research, Linz / Austria
More informationAustralian Standard. Fire detection, warning, control and intercom systems System design, installation and commissioning
AS 1670.3 1997 Australian Standard Fire detection, warning, control and intercom systems System design, installation and commissioning Part 3: Monitoring network performance This Australian Standard was
More informationA. Introduction 1. Title: Transmission and Generation Protection System Maintenance and Testing
A. Introduction 1. Title: Transmission and Generation Protection System Maintenance and 2. Number: PRC-005-1.1b 3. Purpose: To ensure all transmission and generation Protection Systems affecting the reliability
More informationISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials
INTERNATIONAL STANDARD ISO 3452-2 First edition 2000-04-01 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials Essais non destructifs Examen par ressuage Partie 2: Essais des
More informationCertificate: / 9 February 2011
Test report: 936/21212470/A of 1 October 2010 First certification: 26 January 2011 Run of validity until: 25 January 2016 Publication BAnz. 26 January 2011, No. 14, p. 294, Chapter I No. 1.1 Approved application
More informationOracle Communications Performance Intelligence Center
Oracle Communications Performance Intelligence Center System Alarms Guide Release 10.2.1 E77506-01 June 2017 1 Oracle Communications Performance Intelligence Center System Alarms Guide, Release 10.2.1
More informationOperating Instructions!
Operating Instructions! 3 4 Oscillation MO 16.2 / MO 40 Example 3 4 MO 16.2 The unit has to be strictly used according to the instruction manual. Keep the unit away from children and from persons not instructed
More informationThis document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 15213-2 May 2006 ICS 35.240.60 English Version Road transport and traffic telematics - After-theft systems for the recovery
More informationVerification & Testing for Conformity Assessment / EC Verification. NB-Rail (ERTMS Group)
Co-ordination group of Notified Bodies for railway products and systems. Verification & Testing for Conformity Assessment / EC Verification NB-Rail (ERTMS Group) Overview Co-ordination group of Notified
More informationCertificate: _02 / 22 March 2013
Test report: 936/21216334/D of 17 September 2012 Initial certification: 02 March 2012 Expiry date: 01 March 2017 Publication: BAnz AT 05 March 2013 B10, chapter II, No. 2.1 Approved application The tested
More informationGK/GN0612. Guidance on Signalling Lockout Systems to Protect Railway. Undertaking Personnel. Railway Group Guidance for GK/RT0212.
GN Published by Rail Safety and Standards Board Evergreen House 160 Euston Road London NW1 2DX Copyright 2007 Rail Safety and Standards Board Limited GK/GN0612 Issue One: August 2007 Railway Group Guidance
More informationInnovative Solutions for Active Fire Protection in Road/Rail Tunnels and Underground Facilities
Innovative Solutions for Active Fire Protection in Road/Rail Tunnels and Underground Facilities Roger A. Dirksmeier, FOGTEC Fire Protection, Germany Fire Protection Conference Tel Aviv, 4 th of April 2016
More informationAGENDA ITEM: 2.3 Industry Standards Co-ordination Committee. Report from Chairman of GEL/9: Cross Functional Electrical European Standards
MEETING: DATE: 12 November 2014 SUBJECT: SPONSOR: AUTHOR: AGENDA ITEM: 2.3 Industry Standards Co-ordination Committee Report from Chairman of GEL/9: Cross Functional Electrical European Standards Anson
More informationThis is a preview - click here to buy the full publication
TECHNICAL REPORT IEC/TR 62267-2 Edition 1.0 2011-03 Railway applications Automated urban guided transport (AUGT) Safety requirements Part 2: Hazard analysis at top system level INTERNATIONAL ELECTROTECHNICAL
More informationAS/NZS IEC :2013
AS/NZS IEC 61347.2.13:2013 (IEC 61347-2-13, Ed.1.0 2006, MOD) Australian/New Zealand Standard Lamp controlgear Part 2.13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED
More informationNEW CENELEC STANDARDS & CSM-RA NEW CENELEC STANDARDS & CSM-RA 2017
NEW CENELEC STANDARDS & CSM-RA AGENDA New EN 501xx Standards What is new/changed/improved The use of CENELEC in CSM-RA process CENELEC & CSM-RA TIMELINE EN61508 EN61508 ENV50126 EN50126 EN50128 EN50129
More informationPage 1. Brussels, 11 October europacable Rue Marie de Bourgogne 58 B-1000 Brussels EU Transparency Register ID
Prevent the reduction of fire safety in railway tunnels across Europe: Europacable urges to safeguard B2ca,s1a,a1 classification as the minimum requirement for exposed cables Europacable comments on ERA
More informationFLAME AMPLIFIER MODULE 3001
SYSTEM 3000 / 4000 FLAME AMPLIFIER MODULE 3001 TECHNICAL DESCRIPTION EDITION TB_3001_EN_REV03 BFI Automation Mindermann GmbH, Eggerscheidter Str. 57, D-40883 Ratingen Phone +49 (0) 2102 96 82 0, Fax +49
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13938-1 First edition 1999-08-01 Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension Textiles Propriétés
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-28 20 02 (November 2008) ----------------------------- Preparing Activity: USACE Superseding UFGS-13729 (April 2006) UNIFIED FACILITIES GUIDE SPECIFICATIONS References
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 13232-4:2005 Raudteealased rakendused. Rööpad. Riströöpad ja pöörangud. Osa 4: Aktiveerimine, lukustamine ja avastamine Railway applications - Track - Switches and crossings - Part
More informationMeasurement of Safety Integrity of E/E/PES according to IEC61508
Measurement of Safety Integrity of E/E/PES according to IEC61508 Mr. Chen Zhenkang TUV Rheinland Singapore 18. May. 2018 Singapore World Metrology Day 2018 1 Agenda 1. TÜV Rheinland: a Certification Body
More informationGuidelines. Safety Integrity Level - SIL - Valves and valve actuators. February Valves
Valves Guidelines Safety Integrity Level - SIL - Valves and valve actuators February 2009 VDMA German Engineering Federation Valves Manufacturers Association Chairman: Prof.-Dr.-Ing. Heinfried Hoffmann
More informationCertificate: / 29 April 2014
Test report: 936/21217455/A of 10 September 2013 Initial certification: 01 April 2014 Expiry date: 31 March 2019 Publication: BAnz AT 01 April 2014 B12, chapter I, No. 1.1 Approved application The tested
More informationA holistic view on the charm and challenge of CENELEC standards for railway signaling Restricted Siemens AG 2016 All rights reserved.
Stephan Griebel, Siemens AG, Braunschweig A holistic view on the charm and challenge of CENELEC standards for railway signaling Restricted Siemens AG 2016 All rights reserved. Overview 1. Introduction
More informationManaging technical risks
Aon Global Risk Consulting Managing technical risks Choosing the right protection for your investments. Our offer at a glance Introduction...3 Fire Protection...5 Fire protection advice and planning Design
More informationISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General
INTERNATIONAL STANDARD ISO 15875-1 First edition 2003-12-01 Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General Systèmes de canalisations en plastique
More informationCertification Report of the ST3000 Pressure Transmitter
Certification Report of the ST3000 Pressure Transmitter Revision No.: 1.0 Date: Report Number: Product: Customer: Order Number: Authority: Responsible: 2006-Dec-12 SAS-128/2006T ST3000 Pressure Transmitter
More informationKNX module for smoke alarm devices Dual/VdS and Q-Label (Order no )
Product definition KNX module for smoke alarm devices Dual/VdS and Q-Label (Order no 2343 00) Art. no 2343 00 Page 1 of 22 Product definition Table of contents 1 Product definition... 3 1.1 Product catalogue...
More informationCertificate: _01 / 22 March 2013
Test report: 936/21219384/A of 27 September 2012 Initial certification: 20 July 2012 Expiry date: 19 July 2017 Publication: BAnz AT 05 March 2013 B10, chapter I, No. 1.6 Approved application The tested
More informationInstruction manual ICU Hard alarm output contacts
Instruction manual ICU Hard alarm output contacts Instruction manual ICU Hard alarm output contacts January 2012 Part no.: 4416.633 Revision 3 Enraf BV PO Box 812 2600 AV Delft Netherlands Tel. : +31
More informationSurvey of the Burning Behaviour of the Refrigerant HFO-1234yf Brief Report
D M T G m b H & C o. K G B u i l d i n g S a f e t y Expert Body for Fire Protection Tremoniastraße 13 44137 Dortmund GERMANY Phone +49 231-5333-0 Fax +49 231-5333-299 Emaill: gs@dmt.de http://www.dmt.de
More informationWind Alarm Instrument
THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA - THE WORLD OF WEATHER DATA Instruction for Use 020952/02/99 Wind Alarm Instrument 4 4.3242.02.000 ADOLF THIES GmbH & Co. KG Hauptstraße 76 37083 Göttingen
More informationEDA Industry standardization conference 04 April 2013
Speakers EDA Industry standardization conference 04 April 2013 EDA Standardization management and introduction to standardization relevant EDA projects, Mr Christian Schleippmann & Ms Isabelle Desjeux
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 12570 First edition 2000-03-15 Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature Performance hygrothermique
More informationTechnical Paper. Functional Safety Update IEC Edition 2 Standards Update
Technical Paper Functional Safety Update IEC 61511 Edition 2 Standards Update Functional Safety Update Table of Contents 1.0 Introduction 2.0 IEC 61511-1 changes 3.0 IEC 61511-2 changes 4.0 IEC 61511-3
More informationAS/NZS :2015. Conduit systems for cable management AS/NZS :2015. Part 21: Particular requirements Rigid conduit systems
Australian/New Zealand Standard Conduit systems for cable management Part 21: Particular requirements Rigid conduit systems Superseding AS/NZS 2053.2:2001, AS/NZS 2053.6:2001 and AS/NZS 2053.7:2002 This
More informationAutomation, Software und Informationstechnologie
Automation, Software und Informationstechnologie Report on the type approval of the Adjustable Frequency AC Drives PowerFlex 753 and 755 of Rockwell Automation Inc. Bericht-Nr.: 968/EZ 334.00/08 Datum:
More informationBackground information
Infrastructure & Cities Sector Background information Mobility and Logistics Division Munich, October 10, 2013 Rail automation in mass transit systems How does automatic train control work? In automatically
More informationAustralian Standard. Closed circuit television (CCTV) Part 4: Remote video AS AS
AS 4806.4 2008 AS 4806.4 2008 Australian Standard Closed circuit television (CCTV) Part 4: Remote video This Australian Standard was prepared by Committee EL-051, Non-Broadcast Television. It was approved
More informationTechnical standards to support the evolution of technology enabled care services
Technical standards to support the evolution of technology enabled care services Agenda Technical Special Interest Group Signalling across next generation networks and liaison with Ofcom/NICC Technical
More informationCertificate: _01 / 20 August 2013
Test report: 936/21218492/B of 22 January 2013 Initial certification: 05 March 2013 Expiry date: 04 March 2018 Publication: BAnz AT 23 July 2013 B4, chapter II, No. 2.2 Approved application The tested
More informationContents. EN :2012 (E) Issue 5 ( ) Page
Contents Page Foreword... 4 1 Scope... 6 2 Normative references... 6 3 Terms and definitions... 7 4 Symbols and abbreviations... 7 5 Determination of inspection and testing requirements... 8 5.1 General...
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13937-2 First edition 2000-04-01 Textiles Tear properties of fabrics Part 2: Determination of tear force of trousershaped test specimens (Single tear method) Textiles Propriétés
More informationCOMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 8.3.2018 C(2018) 1392 final COMMISSION DELEGATED REGULATION (EU) /... of 8.3.2018 establishing common safety methods on safety management system requirements pursuant to Directive
More informationOrganize your security with PSIM + software
Organize your security with PSIM + software WHAT IS PSIM SOFTWARE? Functional scope of a Physical Security Information Management System Application In practice, the WinGuard platform is collecting all
More informationEARLY FIRE DETECTION IN SWISS ROAD TUNNELS WITH MORE THAN FIREGUARD SENSORS
- 87 - EARLY FIRE DETECTION IN SWISS ROAD TUNNELS WITH MORE THAN 1 500 FIREGUARD SENSORS W.W. Schuldt SIGRIST-PHOTOMETER AG, Switzerland ABSTRACT Major fire incidents in road tunnels with a larger number
More informationConfused by standards Standards for social alarms
Confused by standards Standards for social alarms Chris Dodd Strategic Development Director Chair of the BSI Technical Committee for Social Alarms Convenor (Chair) of the CENELEC technical committee for
More informationDeltapilot S FMB70. Functional Safety Manual. Level and Pressure Measurement with Output Signal ma
Functional Safety Manual Deltapilot S FMB70 Level and Pressure Measurement with Output Signal 4...20 ma Application Use for process pressure measurement in aggressive and non-aggressive gases, vapours
More informationAS/NZS :2016
Australian/New Zealand Standard Luminaires Part 2.2: Particular requirements Recessed luminaires Superseding AS/NZS 60598.2.2:2001 AS/NZS 60598.2.2:2016 (IEC 60598-2-2, Ed. 3.0:2011, MOD) Incorporating
More informationAnti-theft alarm system E63/E64. VS-22 es Baugruppe/Group: 65 10/ (061) Introduction
VS-22 es Baugruppe/Group: 65 meeknet.co.uk/e64 Anti-theft alarm system E63/E64 65 04 03 (061) all countries Datum/Date: 10/2003 Introduction The anti-theft alarm system (DWA) detects and reports attempts
More informationCOMMISSION DELEGATED REGULATION (EU) /... of
EUROPEAN COMMISSION Brussels, 1.7.2015 C(2015) 4394 final COMMISSION DELEGATED REGULATION (EU) /... of 1.7.2015 on the classification of the reaction to fire performance of construction products pursuant
More informationISO INTERNATIONAL STANDARD. Fire detection and alarm systems Part 16: Sound system control and indicating equipment
INTERNATIONAL STANDARD ISO 7240-16 First edition 2007-07-01 Fire detection and alarm systems Part 16: Sound system control and indicating equipment Systèmes de détection et d'alarme d'incendie Partie 16:
More informationFLAME AMPLIFIER MODULE 3001D
SYSTEM 000 / 000 FLAME AMPLIFIER MODULE 00D TECHNICAL DESCRIPTION EDITION TB 00D-SZ Dipl.-Ing. K.-H. Mindermann GmbH, Eggerscheidter Str. 7, D-088 Ratingen Phone +9 (0) 0 9 8 0, Fax +9 (0) 0 98 EMail:
More informationCOMMISSION DELEGATED REGULATION (EU) /... of XXX
Ref. Ares(2017)4156968-24/08/2017 EUROPEAN COMMISSION Brussels, XXX [ ](2017) XXX draft COMMISSION DELEGATED REGULATION (EU) /... of XXX establishing common safety methods on safety management system requirements
More informationSpecification for testing to be conducted at periodic surveillance of products and systems
Specification for testing to be conducted at periodic surveillance of products and systems RD_082, Issue 03 This guide describes the specification for testing to be conducted at periodic surveillance of
More informationINTRODUCTION 1.1. Technical scope
For information Evolution from COMMISSION REGULATION (EU) No 1303/2014 concerning the TSI SRT to the proposal for a revised technical specification for interoperability relating to safety in railway tunnels
More informationExtended Coverage Sidewall Sprinklers
VdS Guidelines for water extinguishing systems VdS 2100-28en Extended Coverage Sidewall Sprinklers Requirements and Test Methods VdS 2100-28en : 2011-05 (01) Publishing house: VdS Schadenverhütung GmbH
More informationHygienic Instruction. EHEDG, Installation and Cleaning Instructions. VEGAVIB VB61, VB63 Hygienic process fittings. Document ID: 35483
Hygienic Instruction EHEDG, Installation and Cleaning Instructions VEGAVIB VB61, VB63 Hygienic process fittings Document ID: 35483 Contents Contents 1 About this document... 3 1.1 Function... 3 1.2 Scope...
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 13937-3 First edition 2000-04-01 Textiles Tear properties of fabrics Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) Textiles Propriétés
More informationCERTIFICATE. on Product Conformity (QAL 1) Number of Certificate: _02
Umwelt Bundes Amt For our Environment /;;!.. TÜVRheinland Precisely Right. CERTIFICATE on Product Conformity (QAL 1) Number of Certificate: 0000001014_02 Certified AMS: Manufacturer: Test Institute: 4500
More informationISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion
INTERNATIONAL STANDARD ISO 2411 Third edition 2000-06-01 Rubber- or plastics-coated fabrics Determination of coating adhesion Supports textiles revêtus de caoutchouc ou de plastique Détermination de l
More information