Überwachte Fertigungsstätte
|
|
- Howard Crawford
- 6 years ago
- Views:
Transcription
1 Überwachte Fertigungsstätte Approved Place of Manufacture Wuxi Suntech Power Co., Ltd. 16 Xinhua Road,Wuxi New District, Jiangsu Province,China Fertigungsstättennummer: Die Überwachung der Fertigungsstätte erfolgte nach dem europäischen Werksinspektions- Verfahren auf Basis der folgenden Schriftstücke: / The surveillance of the factory was performed according to the European Factory Inspection Procedure based on the following documents: ECS/CIG Mai/May 2009 Werksinspektionsverfahren, Harmonisierte Anforderungen/ Factory Inspection Procedure - Harmonized Requirements Die Anforderungen wurden erfüllt. / The requirements have been fulfilled. Datum der letzten Inspektion: / Date of last inspection: Produktkategorie: Siehe Anhang / Product Category: See Appendix VDE Prüf- und Zertifizierungsinstitut GmbH Werksinspektion und Konformitätsüberwachung Factory Inspection and Conformity Control i.a. Thomas Bilz Datum / Date: Merianstrasse 28, Offenbach, Deutschland / Germany Telefon / Phone: , Telefax / fax: / vde-institut@vde.com, Dieses Zertifikat ist nicht übertragbar auf andere Fertigungsstätten und berechtigt nicht zum Führen eines VDE-Zeichens. / This certificate is not transferable to other places of manufacture and does not authorize to use any VDE Mark. Akkreditierungsstelle DAkkS akkreditiert./ German Accreditation Body DAkkS.
2 Name und Sitz der Fertigungsstätte / Name and registered seat of the place of manufacture Wuxi Suntech Power Co., Ltd. 16 Xinhua Road,Wuxi New District, Jiangsu Province,China Anhang zum Fertigungsstättenzertifikat Appendix to Factory Inspection Certificate Datum / Date Seite / Page Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Zertifikats für die überwachte Fertigungsstätte./ This supplement is only valid in conjunction with page 1 of the certificate for the surveilled place of manufacture. Datum der letzten Inspektion / Date of last inspection: Produkt-Kategorie: Terrestrische kristalline Silizium-PV-Module Product Category: Crystalline silicone terrestrial PV-Modules Kunde / Client: Wuxi Suntech Power Co., Ltd 16 Xinhua Road,Wuxi New District, Jiangsu Province,China Typ(en) / Type(s) STPXXX-20/Wfw STPXXX-20/Wfb STPXXX-20/Wfm STPXXX-20/Wfy STPXXX-20/Wfw-TG STPXXX-20/Wfw-MX STPXXX-24/Vfw STPXXX-24/Vfb STPXXX-24/Vfy STPXXX-24/Vfw-TG STPXXX-24/Vfw-MX STPXXX-20/Wfw STPXXX-20/Wfb STPXXX-20/Wfm STPXXX-20/Wfy STPXXX-24/Vfw STPXXX-24/Vfb STPXXX-24/Vfy STPXXXS-20/Wfm STPXXXS-20/Wfb STPXXXS-20/Wfw STPXXXS-20/Wfy STPXXXS-20/Wfw-TG STPXXXS-20/Wfm-TG STPXXXS-20/Wfb-TG STPXXXS-20/Wfw-MX STPXXXS-20/Wfm-MX STPXXXS-20/Wfb-MX STPXXXS-24/Vfw STPXXXS-24/Vfb STPXXXS-24/Vfm STPXXXS-24/Vfs STPXXXS-24/Vfy STPXXXS-24/Vfw-TG STPXXXS-24/Vfw-MX STPXXXS-20/Wfw STPXXXS-20/Wfb STPXXXS-20/Wfm STPXXXS-20/Wfy STPXXXS-24/Vfw STPXXXS-24/Vfb Weitere Informationen siehe Anhang Seite 2 / further information see Appendix page 2.
3 VDE ID. No. License Holder Name Address Appendix to Factory Inspection Certificate Date Page Wuxi Suntech Power Co., Ltd. 16 Xinhua Road,Wuxi New District, Jiangsu Province,China Product License No. Crystalline PV-Modules Standard(s) IEC 61215(Ed.2), IEC 61730(Ed.1)am2, IEC (Ed.1)am1 Type(s) STPXXX-20/Wfw STPXXX-20/Wfb STPXXX-20/Wfm STPXXX-20/Wfy STPXXX-20/Wfw-TG STPXXX-20/Wfw-MX STPXXX-24/Vfw STPXXX-24/Vfb STPXXX-24/Vfy STPXXX-24/Vfw-TG STPXXX-24/Vfw-MX STPXXX-20/Wfw STPXXX-20/Wfb STPXXX-20/Wfm STPXXX-20/Wfy STPXXX-24/Vfw STPXXX-24/Vfb STPXXX-24/Vfy STPXXXS-20/Wfm STPXXXS-20/Wfb STPXXXS-20/Wfw STPXXXS-20/Wfy STPXXXS-20/Wfw-TG STPXXXS-20/Wfm-TG STPXXXS-20/Wfb-TG STPXXXS-20/Wfw-MX STPXXXS-20/Wfm-MX STPXXXS-20/Wfb-MX STPXXXS-24/Vfw STPXXXS-24/Vfb STPXXXS-24/Vfm STPXXXS-24/Vfs STPXXXS-24/Vfy STPXXXS-24/Vfw-TG STPXXXS-24/Vfw-MX STPXXXS-20/Wfw STPXXXS-20/Wfb STPXXXS-20/Wfm STPXXXS-20/Wfy STPXXXS-24/Vfw STPXXXS-24/Vfb XXX is the power range of module Further information see VDE license. VDE Factory ID. No. Name Address Wuxi Suntech Power Co., Ltd 16 Xinhua Road,Wuxi New District, Jiangsu Province,China Identification / Serial number Process steps in factory Yes No STP0xxxxxxxxxxxxxxxxx Stringing process Assembly / Lamination Electrical tests / Classification A COMPANY OF THE Q ASSOCIATION FOR ELECTRICAL, ELECTRONIC & INFORMATION TECHNOLOGIES.../4 A Managing Director Dipl.-Ing./Dipl.-Kfm. Wilfried Jäger Merianstrasse 28 D Offenbach Phone: +49 (0) Fax: +49 (0) vde-institut@vde.com Venue: Offenbach/Main HRB VAT-IDNo.: DE Tax No.: Make Payments to Commerzbank AG BLZ Account-No.: S.W.I.F.T.-Code: DRES DE FF XXX IBAN DE Notified Body according to the Equipment and Product Safety Act (GPSG) for technical work equipment and consumer products. Notified body according to the EMC Directive 2004/108/EG for Electromagnetic Compatibility (EMC). Accredited by DAR accreditation bodies according to DIN EN ISO/IEC 17020, 17021, and DIN EN Accredited by: IEC International Electrotechnical Commission IECEE/CB, IECQ and CENELEC European committee for Electrotechnical Standardization CCA, HAR, ENEC.
4 Appendix to Factory Inspection Certificate Date Page The above listed Identification/Serial numbers are recognized at VDE for Wuxi Suntech Power Co., Ltd. Modules, produced in the factory location(s) mentioned above. The factory is under continuous surveillance according to the Harmonized Factory Inspection Procedure. Each Module is completely assembled in the factory, listed above. Therefore the above mentioned module types, produced in this factory, are in compliance with the requirements of the TECHNICAL RULE AND GUIDELINE OF GSE 08/2012. ET2 Photovoltaics, Modules & Systems i. A. A. Roth Offenbach, A COMPANY OF THE Q ASSOCIATION FOR ELECTRICAL, ELECTRONIC & INFORMATION TECHNOLOGIES A Managing Director Dipl.-Ing./Dipl.-Kfm. Wilfried Jäger Merianstrasse 28 D Offenbach Phone: +49 (0) Fax: +49 (0) vde-institut@vde.com Venue: Offenbach/Main HRB VAT-IDNo.: DE Tax No.: Make Payments to Commerzbank AG BLZ Account-No.: S.W.I.F.T.-Code: DRES DE FF XXX IBAN DE Notified Body according to the Equipment and Product Safety Act (GPSG) for technical work equipment and consumer products. Notified body according to the EMC Directive 2004/108/EG for Electromagnetic Compatibility (EMC). Accredited by DAR accreditation bodies according to DIN EN ISO/IEC 17020, 17021, and DIN EN Accredited by: IEC International Electrotechnical Commission IECEE/CB, IECQ and CENELEC European committee for Electrotechnical Standardization CCA, HAR, ENEC.
5 Überwachte Fertigungsstätte Approved Place of Manufacture Wuxi Suntech Power Co., Ltd. 16 Xinhua Road,Wuxi New District, Jiangsu Province,China Fertigungsstättennummer: Die Überwachung der Fertigungsstätte erfolgte nach dem europäischen Werksinspektions- Verfahren auf Basis der folgenden Schriftstücke: / The surveillance of the factory was performed according to the European Factory Inspection Procedure based on the following documents: ECS/CIG Mai/May 2009 Werksinspektionsverfahren, Harmonisierte Anforderungen/ Factory Inspection Procedure - Harmonized Requirements Die Anforderungen wurden erfüllt. / The requirements have been fulfilled. Datum der letzten Inspektion: / Date of last inspection: Produktkategorie: Siehe Anhang / Product Category: See Appendix VDE Prüf- und Zertifizierungsinstitut GmbH Werksinspektion und Konformitätsüberwachung Factory Inspection and Conformity Control i.a. Thomas Bilz Datum / Date: Merianstrasse 28, Offenbach, Deutschland / Germany Telefon / Phone: , Telefax / fax: / vde-institut@vde.com, Dieses Zertifikat ist nicht übertragbar auf andere Fertigungsstätten und berechtigt nicht zum Führen eines VDE-Zeichens. / This certificate is not transferable to other places of manufacture and does not authorize to use any VDE Mark. Akkreditierungsstelle DAkkS akkreditiert./ German Accreditation Body DAkkS.
6 Name und Sitz der Fertigungsstätte / Name and registered seat of the place of manufacture Wuxi Suntech Power Co., Ltd. 16 Xinhua Road,Wuxi New District, Jiangsu Province,China Anhang zum Fertigungsstättenzertifikat Appendix to Factory Inspection Certificate Datum / Date Seite / Page Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Zertifikats für die überwachte Fertigungsstätte./ This supplement is only valid in conjunction with page 1 of the certificate for the surveilled place of manufacture. Datum der letzten Inspektion / Date of last inspection: Produkt-Kategorie: Terrestrische kristalline Silizium-PV-Module Product Category: Crystalline silicone terrestrial PV-Modules Kunde / Client: Wuxi Suntech Power Co., Ltd 16 Xinhua Road,Wuxi New District, Jiangsu Province,China Typ(en) / Type(s) STPXXX - 20/Wfk STPXXX - 20/Wfi STPXXX - 20/Wfj STPXXX- 24/Vfj Weitere Informationen siehe Anhang Seite 2 / further information see Appendix page 2.
7 VDE ID. No. License Holder Name Address Appendix to Factory Inspection Certificate Date Page Wuxi Suntech Power Co., Ltd. 16 Xinhua Road,Wuxi New District, Jiangsu Province,China Product License No. Crystalline PV-Modules Standard(s) IEC 61215(Ed.2), IEC 61730(Ed.1)am2, IEC (Ed.1)am1 Type(s) STPXXX - 20/Wfk, STPXXX - 20/Wfi, STPXXX - 20/Wfj, STPXXX- 24/Vfj x is the power range of module Further information see VDE license. VDE Factory ID. No. Name Address Wuxi Suntech Power Co., Ltd. 16 Xinhua Road,Wuxi New District, Jiangsu Province,China Identification / Serial number Process steps in factory Yes No STP0xxxxxxxxxxxxxxxxx Stringing process Assembly / Lamination Electrical tests / Classification A COMPANY OF THE Q ASSOCIATION FOR ELECTRICAL, ELECTRONIC & INFORMATION TECHNOLOGIES.../4 A Managing Director Dipl.-Ing./Dipl.-Kfm. Wilfried Jäger Merianstrasse 28 D Offenbach Phone: +49 (0) Fax: +49 (0) vde-institut@vde.com Venue: Offenbach/Main HRB VAT-IDNo.: DE Tax No.: Make Payments to Commerzbank AG BLZ Account-No.: S.W.I.F.T.-Code: DRES DE FF XXX IBAN DE Notified Body according to the Equipment and Product Safety Act (GPSG) for technical work equipment and consumer products. Notified body according to the EMC Directive 2004/108/EG for Electromagnetic Compatibility (EMC). Accredited by DAR accreditation bodies according to DIN EN ISO/IEC 17020, 17021, and DIN EN Accredited by: IEC International Electrotechnical Commission IECEE/CB, IECQ and CENELEC European committee for Electrotechnical Standardization CCA, HAR, ENEC.
8 Appendix to Factory Inspection Certificate Date Page The above listed Identification/Serial numbers are recognized at VDE for Wuxi Suntech Power Co., Ltd. Modules, produced in the factory location(s) mentioned above. The factory is under continuous surveillance according to the Harmonized Factory Inspection Procedure. Each Module is completely assembled in the factory, listed above. Therefore the above mentioned module types, produced in this factory, are in compliance with the requirements of the TECHNICAL RULE AND GUIDELINE OF GSE 08/2012. ET2 Photovoltaics, Modules & Systems i. A. A. Roth Offenbach, A COMPANY OF THE Q ASSOCIATION FOR ELECTRICAL, ELECTRONIC & INFORMATION TECHNOLOGIES A Managing Director Dipl.-Ing./Dipl.-Kfm. Wilfried Jäger Merianstrasse 28 D Offenbach Phone: +49 (0) Fax: +49 (0) vde-institut@vde.com Venue: Offenbach/Main HRB VAT-IDNo.: DE Tax No.: Make Payments to Commerzbank AG BLZ Account-No.: S.W.I.F.T.-Code: DRES DE FF XXX IBAN DE Notified Body according to the Equipment and Product Safety Act (GPSG) for technical work equipment and consumer products. Notified body according to the EMC Directive 2004/108/EG for Electromagnetic Compatibility (EMC). Accredited by DAR accreditation bodies according to DIN EN ISO/IEC 17020, 17021, and DIN EN Accredited by: IEC International Electrotechnical Commission IECEE/CB, IECQ and CENELEC European committee for Electrotechnical Standardization CCA, HAR, ENEC.
9 Überwachte Fertigungsstätte Approved Place of Manufacture Changzhou Almaden Co., Ltd. No.639, Qinglong East Road CHANGZHOU Jiangsu China Fertigungsstättennummer: Die Überwachung der Fertigungsstätte erfolgte nach dem europäischen Werksinspektions- Verfahren auf Basis der folgenden Schriftstücke: / The surveillance of the factory was performed according to the European Factory Inspection Procedure based on the following documents: ECS/CIG Mai/May 2009 Werksinspektionsverfahren, Harmonisierte Anforderungen/ Factory Inspection Procedure - Harmonized Requirements Die Anforderungen wurden erfüllt. / The requirements have been fulfilled. Datum der letzten Inspektion: / Date of last inspection: Produktkategorie: Siehe Anhang / Product Category: See Appendix VDE Prüf- und Zertifizierungsinstitut GmbH Werksinspektion und Konformitätsüberwachung Factory Inspection and Conformity Control i.a. Thomas Bilz Datum / Date: Merianstrasse 28, Offenbach, Deutschland / Germany Telefon / Phone: , Telefax / fax: / vde-institut@vde.com, Dieses Zertifikat ist nicht übertragbar auf andere Fertigungsstätten und berechtigt nicht zum Führen eines VDE-Zeichens. / This certificate is not transferable to other places of manufacture and does not authorize to use any VDE Mark. Akkreditierungsstelle DAkkS akkreditiert./ German Accreditation Body DAkkS.
10 Name und Sitz der Fertigungsstätte / Name and registered seat of the place of manufacture Changzhou Almaden Co., Ltd. No.639, Qinglong East Road CHANGZHOU Jiangsu China Anhang zum Fertigungsstättenzertifikat Appendix to Factory Inspection Certificate Datum / Date Seite / Page Dieses Blatt gilt nur in Verbindung mit Blatt 1 des Zertifikats für die überwachte Fertigungsstätte./ This supplement is only valid in conjunction with page 1 of the certificate for the surveilled place of manufacture. Datum der letzten Inspektion / Date of last inspection: Produkt-Kategorie: Terrestrische kristalline Silizium-PV-Module Product Category: Crystalline silicone terrestrial PV-Modules Kunde / Client: Wuxi Suntech Power Co., Ltd 16 Xinhua Road,Wuxi New District, Jiangsu Province,China. Typ(en) / Type(s) STPXXX - 20/Wfk STPXXX - 20/Wfi STPXXX - 20/Wfj STPXXX- 24/Vfj Weitere Informationen siehe Anhang Seite 2 / further information see Appendix page 2.
11 VDE ID. No. License Holder Name Address Appendix to Factory Inspection Certificate Date Page Wuxi Suntech Power Co., Ltd 16 Xinhua Road,Wuxi New District, Jiangsu Province,China Product License No. Crystalline PV-Modules Standard(s) IEC 61215(Ed.2), IEC 61730(Ed.1)am2, IEC (Ed.1)am1 Type(s) STPXXX - 20/Wfk, STPXXX - 20/Wfi, STPXXX - 20/Wfj, STPXXX- 24/Vfj x is the power range of module Further information see VDE license. VDE Factory ID. No. Name Address Changzhou Almaden Co., Ltd. No.639, Qinglong East Road CHANGZHOU Jiangsu China. Identification / Serial number Process steps in factory Yes No STP3xxx3xxxxxxxxxxxxx Stringing process Assembly / Lamination Electrical tests / Classification A COMPANY OF THE Q ASSOCIATION FOR ELECTRICAL, ELECTRONIC & INFORMATION TECHNOLOGIES.../4 A Managing Director Dipl.-Ing./Dipl.-Kfm. Wilfried Jäger Merianstrasse 28 D Offenbach Phone: +49 (0) Fax: +49 (0) vde-institut@vde.com Venue: Offenbach/Main HRB VAT-IDNo.: DE Tax No.: Make Payments to Commerzbank AG BLZ Account-No.: S.W.I.F.T.-Code: DRES DE FF XXX IBAN DE Notified Body according to the Equipment and Product Safety Act (GPSG) for technical work equipment and consumer products. Notified body according to the EMC Directive 2004/108/EG for Electromagnetic Compatibility (EMC). Accredited by DAR accreditation bodies according to DIN EN ISO/IEC 17020, 17021, and DIN EN Accredited by: IEC International Electrotechnical Commission IECEE/CB, IECQ and CENELEC European committee for Electrotechnical Standardization CCA, HAR, ENEC.
12 Appendix to Factory Inspection Certificate Date Page The above listed Identification/Serial numbers are recognized at VDE for Wuxi Suntech Power Co., Ltd. Modules, produced in the factory location(s) mentioned above. The factory is under continuous surveillance according to the Harmonized Factory Inspection Procedure. Each Module is completely assembled in the factory, listed above. Therefore the above mentioned module types, produced in this factory, are in compliance with the requirements of the TECHNICAL RULE AND GUIDELINE OF GSE 08/2012. ET2 Photovoltaics, Modules & Systems i. A. A. Roth Offenbach, A COMPANY OF THE Q ASSOCIATION FOR ELECTRICAL, ELECTRONIC & INFORMATION TECHNOLOGIES A Managing Director Dipl.-Ing./Dipl.-Kfm. Wilfried Jäger Merianstrasse 28 D Offenbach Phone: +49 (0) Fax: +49 (0) vde-institut@vde.com Venue: Offenbach/Main HRB VAT-IDNo.: DE Tax No.: Make Payments to Commerzbank AG BLZ Account-No.: S.W.I.F.T.-Code: DRES DE FF XXX IBAN DE Notified Body according to the Equipment and Product Safety Act (GPSG) for technical work equipment and consumer products. Notified body according to the EMC Directive 2004/108/EG for Electromagnetic Compatibility (EMC). Accredited by DAR accreditation bodies according to DIN EN ISO/IEC 17020, 17021, and DIN EN Accredited by: IEC International Electrotechnical Commission IECEE/CB, IECQ and CENELEC European committee for Electrotechnical Standardization CCA, HAR, ENEC.
D Mainz Offenbach,
VDE Prüf- und Zertifizierungsinstitut VDE Prüf- und Zertifizierungsinstitut GmbH Merianstraße 28 D-63069 Offenbach Dr. Thomas Block Product Manager Strategy and Business Development SCHOTT Solar AG Hattenbergstr.
More informationCERTIFICATE. für die überwachte Fertigungsstätte for the approved factory. Bisol Proizvodnja d.o.o Latkova vas 59a 3312 Prebold Slovenia
ÖSTERREICHISCHER VERBAND FÜR ELEKTROTECHNIK 1010 Wien, Eschenbachgasse 9 ZVR: 327279890 DVR: 1055887 Prüfwesen & Zertifizierung Kahlenberger Str. 2A 1190 Wien, Österreich Telefon: +43 1 370 58 06 Telefax:+43
More informationCertificate of compliance
Bureau Veritas Consumer Products Services GmbH Certificate of compliance Product: Automatic disconnection device between a generator and the public low-voltage grid PT 30K, PT 33K Use in accordance with
More informationManual Isolating Barrier D461R1 (Revision 01)
D461R1 Manual Isolating Barrier D461R1 (Revision 01) Product Manual Original Instructions valid for models D461R1.11 with 1x signal input into 1x isolated signal output D461R1.12 with 1x signal input into
More informationSmart Metering at VDE Our services at a glance
Smart Metering at VDE Our services at a glance Smart Metering at VDE As part of the energy transition and the accompanying legal regulations for improving energy use efficiency, an increasing number of
More informationManual OW Caution:
Caution: Warning: This manual should be fully read and understood before starting installation! Power supply 230 V 50/60 Hz! Run cooling unit always with correct oil level otherwise damage of pump may
More informationManual Isolating Barrier D461 (Revision 05)
D461 Manual Isolating Barrier D461 (Revision 05) Product Manual Original Instructions valid for models D461.11 with 1x signal input into 1x isolated signal output D461.12 with 1x signal input into 2x isolated
More informationDescriptions: 1. Delta will not guarantee the performance of the products if the application condition falls outside the parameters set forth in the specification. 2. A written request should be submitted
More informationDescriptions: 1. Delta will not guarantee the performance of the products if the application condition falls outside the parameters set forth in the specification. 2. A written request should be submitted
More informationTest Report No
TFI Charlottenburger Allee 41 52068 Aachen Germany Charlottenburger Allee 41 52068 Aachen Germany Egetaepper A/S Postfach 190 7400 Herning DÄNEMARK Fon +49.241.9679 00 Fax +49.241.9679 200 postmaster@tfi-online.de
More informationMFPA Leipzig GmbH Prüf-, Überwachungs- und Zertifizierungsstelle für Baustoffe, Bauprodukte und Bausysteme
Prüf-, Überwachungs- und Zertifizierungsstelle für Baustoffe, Bauprodukte und Bausysteme Geschäftsbereich III - Dr.-lng. Peter ause Arbeitsgruppe 3.1 - Brandverhalten von Bauprodukten Mathias Claus Telefon
More informationPhysikalisch-Technische Bundesanstalt
(1) EC-TYPE-EXAMINATION CERTIFICATE (Translation) (2) Equipment and Protective Systems intended for Use in Potentially Explosive Atmospheres Directive 94/9/EG (3) EC-type-examination Certificate Number:
More informationCERTIFICATE. AXITEC GmbH Otto-Lilienthal-Str. 5 D Böblingen ISO 9001:2008
CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that AXITEC GmbH Otto-Lilienthal-Str. 5 D-71034 Böblingen has established and applies a Quality Management System for Contract
More informationAGC-4, GPC-3, GPU- 3 and GPC 2g with the option Al
Tiff NOCE) ) Component Certificate DEW A/S Frisenborgvej 33 7800 Skive, Danemark Type of unit Protection device Description of unit AGC-4, GPC-3, GPU- 3 and GPC 2g with the option Al Technical data Measuring
More informationAnnex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-12007-01-06 according to DIN EN ISO/IEC 17065:2013 Holder of certificate: TÜV NORD CERT GmbH Langemarckstraße 20, 45141 Essen
More informationLICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 02 Wien,
OVE Austrian Electrotechnical Association 1010 Wien, Eschenbachgasse 9, Austria ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification 1190 Wien, Kahlenberger Str. 2A, Austria T +43 1 370 58
More informationM LLET. Silo pressure detector. Füllstandtechnik. Operating instructions. 1. Description. 1.5 Dimensions. 1.1 Intended use. 1.
Operating instructions 1. Description 1.1 Intended use The pressure detector controls as limit switch the overpressure in silos and vessels. 1.5 Dimensions 1.2 Function If the pressure reaches the switching
More informationDIN EN , DIN EN , DIN EN , DIN EN
Test Report issued under the responsibility of: TEST REPORT EHPA-DACH Testing Regulation Supplemental requirements for granting the international quality label for heat pumps Testing of Air/Water Heat
More informationLICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 03 Wien,
OVE n Electrotechnical Association 1010 Wien, Eschenbachgasse 9, ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification 1190 Wien, Kahlenberger Str. 2A, T +43 1 370 58 06 F +43 1 370 58 06-199
More informationLICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 01 Wien,
OVE n Electrotechnical Association 1010 Wien, Eschenbachgasse 9, ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification 1190 Wien, Kahlenberger Str. 2A, T +43 1 370 58 06 F +43 1 370 58 06-199
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12158-02-02 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2017-10-25 to 2021-03-30 Date of issue: 2017-10-25
More informationPower Plants with Webel Solar Modules
Power Plants with Webel Solar Modules Power Plants with Webel Solar Modules 17W Nautilus Water Pump imported fm Australia X 2 80Wp Solar Panel X 1 Charge controller X 1 Galvanised Steel Pole (3 meters)
More informationLICENCE. to use the European Mark
OVE Austrian Electrotechnical Association 1010 Wien, Eschenbachgasse 9, Austria ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification 1190 Wien, Kahlenberger Str. 2A, Austria T +43 1 370 58
More informationLICENCE. to use the European Mark
OVE Austrian Electrotechnical Association Eschenbachgasse 9, 1010 Wien, Austria ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification Kahlenberger Str. 2A, 1190 Wien, Austria T +43 1 370 58
More informationLICENCE. to use the European Mark
OVE Austrian Electrotechnical Association Eschenbachgasse 9, 1010 Wien, Austria ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification Kahlenberger Str. 2A, 1190 Wien, Austria T +43 1 370 58
More informationLICENCE. to use the European Mark
OVE Austrian Electrotechnical Association Eschenbachgasse 9, 1010 Wien, Austria ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification Kahlenberger Str. 2A, 1190 Wien, Austria T +43 1 370 58
More informationThe CE Marking Access to the European Market
The CE Marking Access to the European Market The EU dictates the compliance of guidance and a CE marking for many industrial products, so that these products may attain to the market. The experts of Eurofins
More informationLICENCE. to use the European Mark
OVE Austrian Electrotechnical Association Eschenbachgasse 9, 1010 Wien, Austria ZVR: 327279890 www.ove.at OVE Testing & Certification Kahlenberger Str. 2A, 1190 Wien, Austria T +43 1 370 58 06 F +43 1
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 17819 01 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 29.06.2017 to 10.08.2019 Holder of certificate: MPA
More informationVentilation unit Zehnder ComfoAir 160
Application The Zehnder ComfoAir 160 comfort ventilation unit was specially developed for use in demanding residential and commercial buildings. It combines maximum comfort, simple operation and a high
More informationOPERATING MANUAL RAY-NC 1000 SERIES
Release Date: 24.01.2017 FRABA GmbH 1 / 12 1. Safety Regulations Risk of personal injury and damage to property! The RAY-NC 1000 must only be installed and put into service by qualified and certified electricians
More informationX-LINE. Photovoltaic high-performance modules. monocrystalline and polycrystalline
V1 2018 y e a r s 15 w a r r a n t y X-LINE Photovoltaic high-performance modules monocrystalline and polycrystalline 2018 15 years manufacturer s warranty Fire reaction class 1 EXE SOLAR Guarantee MODULAR
More informationLICENCE. to use the European Mark
OVE Austrian Electrotechnical Association Eschenbachgasse 9, 1010 Wien, Austria ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification Kahlenberger Str. 2A, 1190 Wien, Austria T +43 1 370 58
More informationLICENCE. to use the European Mark
OVE Austrian Electrotechnical Association Eschenbachgasse 9, 1010 Wien, Austria ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification Kahlenberger Str. 2A, 1190 Wien, Austria T +43 1 370 58
More informationTechnical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme:
Technical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme: Solar products and components Accreditation Kiwa Italia S.p.A. Via Treviso 32/34 31020 San Vendemiano (TV) Italia Tel: +39
More informationA6 Safety Monitoring Device
A6 Safety Monitoring Device PL 0 10 2.2 Manual Publisher NEW LIFT Steuerungsbau GmbH Lochhamer Schlag 8 D- 82166 Gräfelfing Germany Tel.: +49 (0) 89 / 8 98 66-0 Fax: +49 (0) 89 / 8 98 66-3 00 Doc. No.
More informationLICENCE. to use the European Mark
OVE Austrian Electrotechnical Association Eschenbachgasse 9, 1010 Wien, Austria ZVR: 327279890 www.ove.at OVE Testing & Certification Kahlenberger Str. 2A, 1190 Wien, Austria T +43 1 370 58 06 F +43 1
More informationConsumer Protection: Standardized International Product Labels: 2. Scope of Labelling
Austria 1883 OVE was founded in Austria. Austrian market. Belgium CEBEC was founded in 1923. The CEBEC mark is particularly asked for by Belgian consumers. France AFNOR is a private, state-approved association
More informationCertificate Surveillance audit
Certificate Surveillance audit The quality management System of the Company Manufacturer: R. STAHL Schaltgeräte GmbH Address: Am Bahnhof 30, 74638 Waldenburg, Germany 7 Site(s) of manufacture: R. STAHL
More informationSmoke and heat control systems - Part 10: Power supplies EN Classification according to operational and environmental class
Smoke and heat control systems - Part 10: Power supplies EN 12101-10 Classification according to operational and environmental class I.F.I. Institut für Industrieaerodynamik GmbH Welkenrather Straße 120
More informationfulfils all requirements for high protection of the criteria catalogue The appendix is part of the certificate and consists of 5 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Wincor Nixdorf International GmbH Heinz-Nixdorf-Ring 1 33106 Paderborn, Germany DC4 to confirm that
More informationAll following documents were translated from the original german document, which can be found in our system overview or on our website. http://www.flamro.com In case of doubt the german version is valid
More informationCentexbel. General certification regulations. Construction products
Centexbel Scientific and Technical centre of the Belgian Textile Industry General certification regulations Construction products 22/03/17 blz. 1 / 8 Contents 1 Introduction 3 2 Object 3 3 Definitions
More informationQuality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations
Irish Standard I.S. EN 9101:2011 Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations NSAI 2011 No copying without NSAI permission except as permitted by copyright
More informationto use the European Mark Licence No Date of issue: Wien, Rev. No. 02 Wien,
AUSTRIAN ELECTROTECHNICAL ASSOCIATION 1010 Wien, Eschenbachgasse 9 ZVR: 327279890 DVR: 1055887 Testing & Certification Kahlenberger Str. 2A 1190 Wien, Phone: +43 1 370 58 06 Fax: +43 1 370 58 06-199 LICENCE
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 50380:2003 Datasheet and nameplate information for photovoltaic modules Datasheet and nameplate information for photovoltaic modules EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA
More informationLICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 01 Wien,
AUSTRIAN ELECTROTECHNICAL ASSOCIATION 1010 Wien, Eschenbachgasse 9 ZVR: 327279890 DVR: 1055887 Testing & Certification Kahlenberger Str. 2A 1190 Wien, Phone: +43 1 370 58 06 Fax: +43 1 370 58 06-199 LICENCE
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12158-03-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-09-19 to 2019-09-03 Date of issue: 2018-09-19
More informationDSF xx10.xx xhv Ex-Atex Hall Effect Single Channel Speed Sensor
Product ID Type # Product # Drawing # DSF 1210.00 SHV Ex-atex (2m) 374Z-05066 110428F1 DSF 1210.00 SHV Ex-atex (5m) 374Z-05176 110428F1 DSF 1210.00 SHV Ex-atex (10m) 374Z-05590 110428F1 DSF 1410.00 SHV
More informationTECHNICAL SPECIFICATION
TECHNICAL SPECIFICATION IEC TS 62941 Edition 1.0 2016-01 Terrestrial photovoltaic (PV) modules Guidelines for increased confidence in PV module design qualification and type approval INTERNATIONAL ELECTROTECHNICAL
More information54. IWK Internationales Wissenschaftliches Kolloquium International Scientific Colloquium
07-10 September 2009 PROCEEDINGS 54. IWK Internationales Wissenschaftliches Kolloquium International Scientific Colloquium Information Technology and Electrical Engineering - Devices and Systems, Materials
More informationPHOTOVOLTAIC DEVICES -- PART 2:
IRISH STANDARD I.S. EN 60904-2:2007 ICS 27.160 PHOTOVOLTAIC DEVICES -- PART 2: REQUIREMENTS FOR REFERENCE SOLAR National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800
More informationEC CERTIFICATE OF CONFORMITY 0432 CPD 0018
EC CERTIFICATE OF CONFORMITY 0432 CPD 0018 In compliance with the Directive 89/106/EEC of the Council of European Communities of 21 December 1988 on the approximation of laws, regulations and administrative
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-03-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 25.10.2017 to 24.10.2022 Holder of certificate: DMT
More informationReport Test Report
ÖTI Institut für Ökologie, Technik und Innovation GmbH Report 70384 Test Report Applicant Camira Fabrics Ltd Meltham Mills, HD94AY Huddersfield GROSSBRITANNIEN Reference Mr. Daniel Young Application Determination
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11120-04-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 16.01.2018 to 15.01.2023 Holder of certificate: TÜV
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. April 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC April 2015 Issued on 4 May 2015 Page 1 Information Procedure on Standards Notifications registered
More informationSensor module. Operating instructions. Sensor module, Type 17-51P2-... Document No P2-7D0001 Version: 17 May 2011/Rev. 0
Sensor module Operating instructions Sensor module, Document No. 11-51P2-7D0001 Version: 17 May 2011/Rev. 0 Operating Instructions Sensor-Module Type: 17-51P2-. Document no.: 11-51P2-7D0001 Version: 17.
More informationUpdate on the new IEC standards and their impact on quality of PV modules
1 Update on the new IEC standards and their impact on quality of PV modules Review of the major changes in the last editions of the standards series IEC 61215 - Terrestrial photovoltaic (PV) modules Design
More informationInstallation Guide. Circulation set for S-F units. Zirkulationsset für S-F Stationen. Code No. 004U8405
Installation Guide Circulation set for Zirkulationsset für S-F Stationen iv.788 Code No. 004U8400 iv.484 Code No. 004U8403 iv.789 Code No. 004U8401 iv.487 Code No. 004U8405 English - G If the household
More informationLICENCE. to use the European Mark
OVE Austrian Electrotechnical Association Eschenbachgasse 9, 1010 Wien, Austria ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification Kahlenberger Str. 2A, 1190 Wien, Austria T +43 1 370 58
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 SHANGHAI INSPECTION AND TESTING INSTITUTE OF INSTRUMENTS AND AUTOMATION SYSTEMS CO., LTD. 103 Cao Bao Road Shanghai, 200233 People s Republic of China Mr. Xu
More informationSVENSK STANDARD SS-EN ISO 13488
SVENSK STANDARD SS-EN ISO 13488 Fastställd Utgåva Sida 2001-02-09 1 1 (1+14) Copyright SIS. Reproduction in any form without permission is prohibited. Quality systems Medical devices Particular requirements
More informationDeutsche Akkreditierungsstelle GmbH. Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-11321-01-00 according to DIN EN ISO/IEC 17065:2013 Period of validity: 09.02.2018 to 08.02.2023 Holder of certificate: TÜV
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 60904-2 Second edition 2007-03 Photovoltaic devices Part 2: Requirements for reference solar devices This English-language version is derived from the original bilingual publication
More informationTechnical Bulletin. Fire protection requirements for cabling systems MLAR 03/2000 MDBR 12/1998. Date: 08/2006
Technical Bulletin Fire protection requirements for cabling systems MLAR 03/2000 MDBR 12/1998 Date: 08/2006 This technical bulletin provides you with information on specific technical subjects. It is based
More informationHazardous Location Heaters. Thermostat INSTRUCTION MANUAL
Hazardous Location Heaters Thermostat INSTRUCTION MANUAL Rev. K 2018 nvent P/N 89115890 TABLE OF CONTENTS Warranty and Return Policy...2 Application...3 Control Accuracy...3 Technical Data...3 Design Data...3
More informationType approval qualification of Photovoltaic Modules Procedures and test experiences
Type approval qualification of Photovoltaic Modules Procedures and test experiences We Advise. Develop. Facilitate. Inspect. Certificate. Precisely Right. For You. 1 Type approval qualification of Photovoltaic
More informationAcoustic Verification Report
Acoustic Verification Report Invacare XPO 2 Portable Oxygen Concentrator Type XPO100B-EU for Date: 2013-12-10 Our reference: IS-ATC2-MUC/js Document: Report Invacare VR.600010074.002.12 - Revision 2.docx
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 61215-1-1:2016 Terrestrial photovoltaic (PV) modules - Design qualification and type approval - Part 1-1: Special requirements for testing of crystalline silicon photovoltaic (PV)
More informationDIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC.
DIRECTIVE 98/34/EC REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC January 2012 Issued on : 02 February 2012 Page 1 Directive 98/34/EC Information
More informationLICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 01 Wien,
OVE Austrian Electrotechnical Association Eschenbachgasse 9, 1010 Wien, Austria ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification Kahlenberger Str. 2A, 1190 Wien, Austria T +43 1 370 58
More informationAnnex to the Accreditation Certificate PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate PL-18354-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 11.12.2018 to 21.12.2022 Date of issue: 11.12.2018 Holder
More informationPRODUCT INFORMATION. Satellite collector NANOSOL. Solarbayer GmbH (29.14) 1
We develop for your future Solarbayer GmbH (29.14) 1 Safety regulations Carefully read the safety instructions before commencing the installation. It s for your own safety. Please follow the structural
More informationTesting and certification services for solar products
Testing and certification services for solar products Solar and Renewable Energy sector Kiwa Italia Group Solar PV Testing and Certification Kiwa operates as an internationally recognized Notified Body
More informationWhen Standards meet experience and increase the value of PV. Dr. Francesco Groppi (CESI Middle East) Chairman of CENELEC/TC82
When Standards meet experience and increase the value of PV (CESI Middle East) Chairman of CENELEC/TC82 About CENELEC CENELEC is the European Committee for Electrotechnical Standardization and is responsible
More informationPUBLIC 8070/17 1 DG B LIMITE EN. Council of the European Union Brussels, 20 April 2017 (OR. en) 8070/17 LIMITE PV/CONS 17 AGRI 190 PECHE 144
Conseil UE Council of the European Union Brussels, 20 April 2017 (OR. en) 8070/17 DRAFT MINUTES 1 Subject: LIMITE PUBLIC PV/CONS 17 AGRI 190 PECHE 144 3529th meeting of the Council of the European Union
More informationVdS 5477en : (01) Key deposit boxes
VdS 5477en : 2004-03 (01) Key deposit boxes We wish to thank the Police, in particular the Kommission Polizeiliche Kriminalprävention der Länder und des Bundes - KPK (German Police commitee for crime prevention)
More informationLICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 02 Wien,
AUSTRIAN ELECTROTECHNICAL ASSOCIATION 1010 Wien, Eschenbachgasse 9 ZVR: 327279890 DVR: 1055887 Testing & Certification Kahlenberger Str. 2A 1190 Wien, Austria Phone: +43 1 370 58 06 Fax: +43 1 370 58 06-199
More informationOperating Manual MS220Vi and MSR220Vi
ZIEHL industrie elektronik GmbH + Co KG Daimlerstraße 13, D 74523 Schwäbisch Hall + 49 791 504-0, info@ziehl.de, www.ziehl.de Temperature Relays and MINIKA Mains Monitoring Digital Panelmeters MINIPAN
More informationSafety. Operating instructions Pilot burners ZAI, ZKIH DANGER. Contents WARNING CAUTION. Changes to edition Elster GmbH Edition 09.
03 Elster GmbH Edition 09.3 Translation from the German 0350560 D F NL E DK S N P GR TR C PL RUS H www.docuthek.com Operating instructions Pilot burners, Contents Pilot burners,... Contents... Safety....
More informationIECRE OPERATIONAL DOCUMENT
IECRE OD-401 IECRE OPERATIONAL DOCUMENT Edition 4.0 2019-01-28 Deleted: 3 Deleted: 05 Deleted: 10 IEC System for Certification to Standards relating to Equipment for use in Renewable Energy applications
More informationIEC PROJETOS EM VOTAÇÃO
IEC PROJETOS EM VOTAÇÃO IEC/TC 10 - Fluids for electrotechnical applications. ATÉ 25 DE JULHO DE 2014 IEC 60599 Ed.3: Mineral oil-impregnated electrical equipment in service - Guide to the interpretation
More informationUnderstanding Hazardous and Explosion-Protection Environments
Understanding Hazardous and Explosion-Protection Environments Explosions occur when a mixture of oxygen and explosive substances develop into explosive gases. When the concentration of a substance in air
More informationResilient, textile and laminate floor coverings - Classification (ISO 10874:2009)
Irish Standard I.S. EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) NSAI 2012 No copying without NSAI permission except as permitted by copyright law.
More informationREGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC. February 2015
REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC February 2015 Issued on : 6 March 2015 Page 1 Information Procedure on Standards Notifications registered
More informationen Electric hammer EH 9 BL, BLM, BLS. Operator's manual
0212728en 002 05.2008 Electric hammer EH 9 BL, BLM, BLS Operator's manual Inhalt Contents 1 Foreword... 5 2 Introduction... 6 2.1 Means of representation for this operator's manual... 6 2.2 WACKER representative...
More informationPaper and board - Determination of grammage (ISO 536:2012)
Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard
More informationReport Classification Report on Burning Behaviour
Report 65596 Classification Report on Burning Behaviour Applicant WESELER TEPPICH GMBH & CO.KG Emmelsumer Strasse 218 46485 Wesel DEUTSCHLAND Reference Hr. van Soest Application Classification of burning
More informationX-TEND. Stainless Steel Cable Net Systems European Technical Approval No. ETA - 13 / 0650 ETA
X-TEND Stainless Steel Cable Net Systems European Technical Approval No. ETA - 13 / 0650 ETA European Technical Approval ETA-13 / 0650 Stainless Steel Cable Net Systems X-TEND by Carl Stahl GmbH www.carlstahl-architektur.com
More informationfulfils all requirements for extended protection of the criteria catalogue The appendix is part of the certificate and consists of 4 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Beiersdorf Shared Services GmbH Quickbornstraße 24 20253 Hamburg, Germany to confirm that its security
More information1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres?
QUESTIONS TO REGULATORS 1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres? Note: This answer only relates to coal mining in the state of New South
More informationQuality assurance and safety aspects. Dipl.Ing. Udo Siegfriedt DGS-Berlin Brandenburg
for small PV installations Dipl.Ing. Udo Siegfriedt DGS-Berlin Brandenburg Introduction DGS Germanys first non profit association aiming a renewable and environmental friendly energy supply. Founded in1975
More informationPARTS & SERVICE. Burner Refurbishment Procedure THERMO
PAT & EVICE Burner efurbishment Procedure THEMO Id.No. DOK50010 ev. 06/2017 Table of content 1. Introduction efurbishment Procedure 3 2. General Procedure 4 3. THEMO Burner Variant Matrix 5 4. Cable Harnesses
More informationThis document is a preview generated by EVS
EESTI STANDARD EVS-EN 10342:2005 Magnetic materials - Classification of surface insulations of electrical steel sheet, strip and laminations Magnetic materials - Classification of surface insulations of
More informationLICENCE. to use the European Mark. Licence No Date of issue: Wien, Rev. No. 01 Wien,
OVE ustrian Electrotechnical ssociation 1010 Wien, Eschenbachgasse 9, ustria ZVR: 327279890 DVR: 1055887 www.ove.at OVE Testing & Certification 1190 Wien, Kahlenberger Str. 2, ustria T +43 1 370 58 06
More informationSECONDARY CELLS AND BATTERIES
STANDARD I.S. EN 61960:2004 ICS 29.220.99 SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR TOHER National Standards Authority of Ireland Dublin 9 Ireland Tel: (01) 807 3800 Fax: (01) 807 3838 NON-ACID
More informationOperating Instruction SCHICK ceramic - milling set
Georg Schick Dental GmbH Lehenkreuzweg 12 D-88433 Schemmerhofen Telefon 07356/9500-0 Telefax 07356/9500-95 E-Mail info@schick-dental.de Internet www.schick-dental.de Original Operating Instruction SCHICK
More informationfrom ENGINEERING up to the complete PLANT, ALL from a single SOURCE MULTI Kühlsysteme GmbH Zschorlauer Straße Aue/Saxony GERMANY
from ENGINEERING up to the complete PLANT, ALL from a single SOURCE Location Company building Multi Kühlsysteme GmbH Zschorlauer Strasse 56 D-08280 Aue / Saxony GERMANY Phone: + 49 3771 24 67 0 Telefax:
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD IEC 61724 First edition 1998-04 Photovoltaic system performance monitoring Guidelines for measurement, data exchange and analysis Suivi des performances des systèmes photovoltaïques
More information