ST 3000 Smart Transmitter Series 900 Gauge Pressure Models Specifications 34-ST July 2010

Transcription

1 ST 3000 Smart Transmitter Series 900 Gauge Pressure Models Specifications 34-ST July 2010 Introduction In 1983, Honeywell introduced the first Smart Pressure Transmitter the ST In 1989, Honeywell launched the first all digital, i-directional protocol f smart field devices. Today, its ST 3000 Series 900 In-line gauge Pressure Transmitters STG94L and the Series 900 Dualhead gauge (STG944), continue to ring proven smart technology to a wide spectrum of pressure measurement applications. Typical applications include high-pressure measurement in oilers, fuel feeds, and high-pressure reaction vessels in the petrochemical and hydrocaron recovery industries any location where accuracy and reliaility are crucial to safe, economical operation. As with the rest of the line of Honeywell transmitters, the in-line transmitters offer the aility to e installed in a wide variety of hazardous environments f accurate repeatale pressure measurement. Models Figure 1 On the left is an In-line GP type Model STG94L and on the right is a dual-head GP type Model STG944. Both these Series 900 Gauge Pressure Transmitters feature proven piezesistive sens technology. STG944 0 to 500 psi 0 to 35 ar STG94L 0 to 500 psi 0 to 35 ar STG974 0 to 3,000 psi 0 to 210 ar STG97L 0 to 3,000 psi 0 to 210 ar STG98L 0 to 6,000 psi 0 to 415 ar STG99L 0 to 10,000 psi 0 to 690 ar All ST 3000 transmitters can e dered to provide one of the following output communication options. Communications options 4-20 ma Honeywell Digitally Enhanced (DE) HART (versions 5.x 6.x) Honeywell s cost-effective ST 3000 S900 transmitters lead the industry in reliaility and staility FOUNDATION Fieldus ST 3000 S900 Transmitter Benefits Staility = ±0.01% per year Reliaility = 470 years MTBF When digitally integrated with Honeywell s Process Knowledge System, EXPERION PKS, ST 3000 instruments provide a me accurate process variale as well as advanced diagnostics.

2 2 ST 3000 Smart Pressure Transmitter The devices provide comprehensive self-diagnostics to help users maintain high uptime, meet regulaty requirements, and attain high quality standards. S900 transmitters allow smart perfmance at analog prices. Accurate, reliale and stale, Series 900 transmitters offer greater turndown ratio than conventional transmitters. Description The ST 3000 transmitter can replace any 4 to 20 ma output transmitter in use today and operates over a standard twowire system. The measuring means is a piezesistive sens, which actually contains three senss in one. It contains a differential pressure sens, a temperature sens, and a static pressure sens. Microprocess-ased electronics provide higher spanturndown ratio, improved temperature and pressure compensation, and improved accuracy. The transmitter s meter ody and electronics housing resist shock, viration, crosion, and moisture. The electronics housing contains a compartment f the single-oard electronics, which is isolated from an integral junction ox. The single-oard electronics is replaceale and interchangeale with any other ST 3000 Series 100 Series 900 model transmitters. Features Choice of linear square root output confmity is a simple configuration selection. Direct digital integration with Experion PKS and other control systems provides local measurement accuracy to the system level without adding typical A/D and D/A converter inaccuracies. Unique piezesistive sens automatically compensates input f temperature and static pressure. Added smart features include configuring lower and upper range values, simulating accurate analog output, and selecting preprogrammed engineering units f display. Smart transmitter capailities with local remote interfacing means significant manpower efficiency improvements in commissioning, start-up, and ongoing maintenance functions. Advanced Diagnostics ST 3000 is now availale f oth HART 6 and Foundation TM Fieldus with advanced diagnostics that minimize unplanned plant outages, minimize maintenance costs and y providing the industry s most reliale transmitter. Provide advanced warning of possile failure events and avoid costly shutdowns. Three levels of failure repting Like other Honeywell transmitters, the ST 3000 features two-way communication and configuration capaility etween the operat and the transmitter through several Honeywell field-rated ptale configuration devices, including the Smart Field Communicat (SFC) and the Multiple Communication Configurat (MC ToolKit). While oth are made f in-field use, the MC Toolkit also can e dered f use in intrinsically safe environments. Comprehensive list of on-oard diagnostics (Ref. ST 3000 User manual with HART 6, 34-ST Rev: June 09 and Foundation TM Fieldus option manual 34- ST Rev: June 09) The SCT 3000 Smartline Configuration Toolkit provides an easy way to configure instruments using a personal computer. The toolkit enales configuration of devices efe shipping installation. The SCT 3000 can operate in the offline mode to configure an unlimited numer of devices. The dataase can then e loaded down-line during commissioning.

3 ST 3000 Smart Pressure Transmitter 3 Operating Conditions All Models Parameter Reference Condition Rated Condition Operative Limits Transptation and Stage C F C F C F C F Amient Temperature 25±1 77±2-40 to to to to to -67 to Meter Body Temperature 25±1 77±2-40 to 110* -40 to 230* -40 to 125** -40 to 257** -55 to to 257 Humidity %RH 10 to 55 0 to to to 100 Vacuum Region Minimum Pressure mmhg asolute inh 2 O asolute Atmospheric Atmospheric (sht term*** ) 1 (sht term*** ) Supply Voltage, Current, and Load Resistance Maximum Allowale Wking Pressure (MAWP) (ST 3000 products are rated to Maximum Allowale Wking Pressure.) Voltage Range: 10.8 to 42.4 Vdc at terminals Current Range: 3.0 to 21.8 ma Load Resistance: 0 to 1,440 ohms (as shown in Figure 2) STG944 and STG94L = 500 psi, 35 ar STG974 and STG97L = 3,000 psi, 210 ar STG98L = 6,000 psi, 415 ar STG99L = 10,000 psi, 690 ar Units can withstand overpressure of 1.5X MAWP without damage. * F model 944 with CTFE fill fluid, the rating is 15 to 70 C (5 to 158 F); f model 98L with CTFE fill fluid, the rating is 15 to 110 C (5 to 230 F). ** F Models STG94L, STG97L, and STG98L, STG99L the upper limit is 110 C (230 F). *** Sht term equals 2 hours at 70 C (158 F) Loop Resistance (ohms) NOTE: A minimum of 250 ohms of loop resistance is necessary to suppt communications. Loop resistance equals arrier resistance plus wire resistance plus receiver resistance. = Operating Area Operating Voltage (Vdc) Figure 2 - Supply voltage and loop resistance chart

4 4 ST 3000 Smart Pressure Transmitter Perfmance Under Rated Conditions* - Model STG944 & STG94L (0 to 500 psi/35 ar) Parameter Description Upper Range Limit Minimum Span psi ar psi ar Turndown Ratio 100 to 1 Zero Elevation and Suppression Accuracy (Reference Includes comined effects of linearity, hysteresis, and repeataility) Accuracy includes residual err after averaging successive readings. F FOUNDATION TM Fieldus use Digital Mode specifications. F HART use Analog Mode specifications. Zero Temperature Effect per 28C (50F) Comined Zero and Span Temperature Effect per 28C (50F) Staility No limit except minimum span from asolute 0 (zero) to +100% URL. Specifications valid over this range. In Analog Mode: ±0.075% of calirated span upper range value (URV), whichever is greater, terminal ased. F URV elow reference point (20 psi), accuracy equals: 20 psi 1.4 ar span psi span ar In Digital Mode: ±0.0625% of calirated span upper range value (URV), whichever is greater, terminal ased. F URV elow reference point (20 psi), accuracy equals: psi span psi In Analog Mode: ±0.1625% of span. F URV elow reference point (50 psi), effect equals: 50 psi span psi In Digital Mode: ±0.15% of span. F URV elow reference point (50 psi), effect equals: psi span psi ar span ar In Analog Mode: ±0.25% of span. F URV elow reference point (50 psi), effect equals: 50 psi 1.4 ar span ar 3.5 ar span ar 3.5 ar span psi In Digital Mode: ±0.225% of span. F URV elow reference point (50 psi), effect equals: psi span psi ±0.015% of URL per year span ar 3.5 ar span ar * Perfmance specifications are ased on reference conditions of 25 C (77 F), 10 to 55% RH, and 316L Stainless Steel arrier diaphragm.

5 ST 3000 Smart Pressure Transmitter 5 Perfmance Under Rated Conditions* - Model STG974 & STG97L (0 to 3,000 psi/210 ar) Parameter Description Upper Range Limit Minimum Span psi ar psi ar 3, Turndown Ratio 100 to 1 Zero Elevation and No limit except minimum span from asolute 0 (zero) to +100% URL. Specifications Suppression valid over this range. Accuracy (Reference Includes In Analog Mode: ±0.10% of calirated span upper range value (URV), whichever is comined effects of linearity, greater, terminal ased. hysteresis, and repeataility) F URV elow reference point (750 psi), accuracy equals: Accuracy includes residual err 750 psi after averaging successive 52 ar readings. span psi span ar F FOUNDATION TM Fieldus use Digital Mode specifications. F HART use Analog Mode specifications. Zero Temperature Effect per 28C (50F) Comined Zero and Span Temperature Effect per 28C (50F) Staility In Digital Mode: ±0.075% of calirated span upper range value (URV), whichever is greater, terminal ased. F URV elow reference point (300 psi), accuracy equals: 750 psi 52 ar span psi In Analog Mode: ±0.2125% of span. F URV elow reference point (500 psi), effect equals: 500 psi span ar span psi In Digital Mode: ±0.20% of span. F URV elow reference point (500 psi), effect equals: 500 psi 35 ar span psi span ar In Analog Mode: ±0.325% of span. F URV elow reference point (500 psi), effect equals: 500 psi 35 ar span ar 35 ar span psi In Digital Mode: ±0.30% of span. F URV elow reference point (500 psi), effect equals: psi span psi ±0.03% of URL per year span ar 35 ar span ar * Perfmance specifications are ased on reference conditions of 25 C (77 F), 10 to 55% RH, and 316L Stainless Steel arrier diaphragm.

6 6 ST 3000 Smart Pressure Transmitter Perfmance Under Rated Conditions* - Model STG98L (0 to 6,000 psi/415 ar) Parameter Description Upper Range Limit Minimum Span psi ar psi ar 6, Turndown Ratio 100 to 1 Zero Elevation and Suppression No limit except minimum span from asolute 0 (zero) to +100% URL. Specifications valid over this range. Accuracy (Reference Includes comined effects of linearity, hysteresis, and repeataility) Accuracy includes residual err after averaging successive readings. F FOUNDATION TM Fieldus use Digital Mode specifications. F HART use Analog Mode specifications. In Analog Mode: ±0.10% of calirated span upper range value (URV), whichever is greater, terminal ased. F URV elow reference point (1,500 psi), accuracy equals: 104 ar span ar In Digital Mode: ±0.075% of calirated span upper range value (URV), whichever is greater, terminal ased. F URV elow reference point (1,500 psi), accuracy equals: Zero Temperature Effect per 28C (50F) ar span ar In Analog Mode: ±0.2125% of span. F URV elow reference point (1,500 psi), effect equals: Comined Zero and Span Temperature Effect per 28C (50F) 104 ar span ar In Digital Mode: ±0.20% of span. F URV elow reference point (1,500 psi), effect equals: ar span ar In Analog Mode: ±0.325% of span. F URV elow reference point (1,500 psi), effect equals: 104 ar span ar In Digital Mode: ±0.30% of span. F URV elow reference point (1,,500 psi), effect equals: Staility ±0.03% of URL per year ar span ar * Perfmance specifications are ased on reference conditions of 25 C (77 F), 10 to 55% RH, and 316L Stainless Steel arrier diaphragm.

7 ST 3000 Smart Pressure Transmitter 7 Perfmance Under Rated Conditions* - STG99L (0 to 10,000 psi/690 ar) Parameter Description Upper Range Limit Minimum Span psi ar psi ar 10, Turndown Ratio 100 to 1 Zero Elevation and Suppression Accuracy (Reference Includes comined effects of linearity, hysteresis, and repeataility) Accuracy includes residual err after averaging successive readings. F FOUNDATION TM Fieldus use Digital Mode specifications. F HART use Analog Mode specifications. No limit except minimum span from asolute 0 (zero) to +100% URL. Specifications valid over this range. In Analog Mode: ±0.10% of calirated span upper range value (URV), whichever is greater, terminal ased. F URV elow reference point (2,500 psi), accuracy equals: 172 ar span ar In Digital Mode: ±0.075% of calirated span upper range value (URV), whichever is greater, terminal ased. F URV elow reference point (2,500 psi), accuracy equals: Zero Temperature Effect per 28C (50F) ar span ar In Analog Mode: ±0.2125% of span. F URV elow reference point (2,500 psi), effect equals: Comined Zero and Span Temperature Effect per 28C (50F) 172 ar span ar In Digital Mode: ±0.20% of span. F URV elow reference point (2,500 psi), effect equals: ar span ar In Analog Mode: ±0.325% of span. F URV elow reference point (2,500 psi), effect equals: 172 ar span ar In Digital Mode: ±0.30% of span. F URV elow reference point (2,500 psi), effect equals: Staility ±0.03% of URL per year ar span ar * Perfmance specifications are ased on reference conditions of 25 C (77 F), 10 to 55% RH, and 316L Stainless Steel arrier diaphragm.

8 8 ST 3000 Smart Pressure Transmitter Perfmance Under Rated Conditions General f all Models Parameter Description Output (two-wire) Supply Voltage Effect Damping Time Constant CE Confmity (Europe) NAMUR NE 43 Compliance SIL 2/3 Compliance Lightning Protection Option (Code LP ) Analog 4 to 20 ma DE digital communications mode. Options availale f Foundation TM Fieldus and HART protocol % of span per volt. Adjustale from 0 to 32 seconds digital damping. 89/336/EEC, Electromagnetic Compatiility (EMC) Directive. Transmitter failure infmation is generated when the measuring infmation is invalid no longer present. Failure infmation is transmitted as a current signal ut outside the nmal 4-20 ma measurement signal level. Transmitter failure values are: 3.6 ma and 21.0 ma. The nmal signal range is 3.8 ma and 20.5 ma. SIL certified to IEC f non-redundant use in SIL 2 related Safety Systems (single use) and f redundant (multiple) use in SIL 3 Safety Systems through TÜV Nd Sys Tec GmH & Co. KG under the following standards: IEC : 1998; IEC : 2000; IEC : Leakage Current: 10 micro amps 42.4 VDC, 93 C Impulse Rating: 10/20 µ sec. 5,000 Amps (50 strikes) 10,000 Amps (20 strikes) (rise/decay) 10/1,000 µ sec. 250 Amps (1,000 strikes) 500 Amps (400 strikes) Physical and Approval Bodies Parameter Barrier Diaphragms Material Description Dual-Head Meter Body: 316L SS, Hastelloy C-276 2, Monel 400 3, Tantalum In-Line Meter Body: 316L SS, Hastelloy C Process Head Material Dual-Head Meter Body: Caron Steel (zinc-plated) 5, 316 SS, Hastelloy C-276 6, Monel Monel [Standard reference head is Caron Steel (zinc-plated) 5. Optional reference head is 316 SS 4.] In-Line Meter Body: 316L SS process interface. Head Gaskets Meter Body Bolting Mounting Bracket Vent/Drain Valves & Plugs 1 Fill Fluid Electronic Housing Mounting Teflon is standard. Viton is availale. Dimensions See Figures 5 and 6. Net Weight Caron Steel (Zinc plated) standard. Options include 316 SS, NACE A286 SS olts with 304 SS nuts, and B7M. Caron Steel (Zinc-plated) Stainless Steel angle racket Caron Steel flat racket availale. 316 SS 4, Hastelloy C-276 2, Monel (Models STG944 and STG974 only) Silicone DC 200 CTFE (Chlotrifluoethylene) Epoxy-Polyester hyrid paint. Low Copper-Aluminum. Meets NEMA 4X (watertight) and NEMA 7 (explosion proof). 316 SS optional. Can e mounted in virtually any position using the standard mounting racket. Bracket is designed to mount on 2-inch (50 mm) vertical hizontal pipe. See Figure 3 f dual-head models and Figure 4 f in-line models. With Dual-Head Meter Body: 9 pounds (4.1 Kg) With In-Line Meter Body: 3.8 pounds (1.7 Kg) 1 Vent/Drains are sealed with Teflon PTFE 2 Hastelloy C-276 UNS N Monel 400 UNS N Supplied as 316 SS as Grade CF8M, the casting equivalent of 316 SS. 5 Caron Steel heads are zinc-plated and not recommended f water service due to hydrogen migration. F that service, use 316 stainless steel wetted Process Heads. 6 Hastelloy C-276 UNS N Supplied as indicated as Grade CW12MW, the casting equivalent of Hastelloy C Monel 400 UNS N Supplied as indicated as Grade M30C, the casting equivalent of Monel Monel 400 UNS N04400 UNS N04405 NOTE: Pressure transmitters that are part of safety equipment f the protection of piping (systems) vessel(s) from exceeding allowale pressure limits, (equipment with safety functions in accdance with Pressure Equipment Directive 97/23/EC article 1, 2.1.3), require separate examination.

9 ST 3000 Smart Pressure Transmitter 9 Certifications FM Approvals SM Type of Protection Comm. Option Field Parameters Temp. Codes Explosionproof: Class I, Division 1, Groups A, B, C, D locations Dust Ignition Proof: Class II,, Division 1, Groups E, F, G locations, Enclosure Type 4X Intrinsically Safe: Class I, II,, Division 1, Groups A, B, C, D, E, F, G locations, Encl Intrinsically Safe: Class I, II,, Division 1, Groups A, B, C, D, E, F, G locations; Class 1, Zone 0, AEx ia Group IIC, Enclosure Type 4X / IP 66/67 Nonincendive: Class I, Division 2, Groups A, B, C, D locations, Enclosure Type 4X Nonincendive: Class I, Division 2, Groups A, B, C, D; Suitale f: Class II, Division 2, Groups F&G; Class, Division 2; Class I, Zone 2, Group IIC, Enclosure Type 4X / IP 66/67 *Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected. FM Approvals SM is a service mark of FM Gloal All All T5 Ta = 93ºC 4-20 ma / DE 4-20 ma Fieldus Entity (Not FISCO) Fieldus Entity (Not FISCO) FISCO 4-20 ma / DE 4-20 ma / HART Fieldus Entity (Not FNICO) Fieldus Entity (Not FNICO) FNICO Vmax = 42.4V Imax = 225mA Vmax = 30V Imax = 225mA Vmax = 32V Imax = 120mA Li = 0 Pi =0.84W Vmax = 24V Imax = 250mA Li = 0 Vmax = 17.5V Imax = 380mA Li = 0 Pi =5.32W Vmax = 42.4V Imax = 225mA Vmax = 30V Imax = 225mA Vmax = 32V Imax = 120mA Li = 0 Pi =0.84W Vmax = 24V Imax = 250mA Li = 0 Vmax = 32V Li = 0 T4 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC

10 10 ST 3000 Smart Pressure Transmitter Type of Protection Comm. Option Field Parameters Temp. Codes Explosion Proof: Class I, Division 1, Groups B, C, D locations Canadian Standards Association (CSA) Dust Ignition Proof: Class II,, Division 1, Groups E, F, G locations, Enclosure Type 4X Intrinsically Safe: Class I, II,, Division 1, Groups A, B, C, D, E, F, G locations, Enclosure Type 4X Nonincendive: Class I, Division 2, Groups A, B, C, D locations, Enclosure Type 4X Canadian Registration Numer (CRN): All All T4 Ta = 93ºC 4-20 ma / DE 4-20 ma / HART Fieldus Entity (Not FISCO) 4-20 ma / DE 4-20 ma / HART Fieldus Entity (Not FNICO) Vmax = 42V Imax = 225mA Vmax = 42V Imax = 225mA Vmax = 24V Imax = 250mA Li = 0 Vmax = 42.4V Imax = 225mA Vmax = 30V Imax = 225mA Vmax = 24V Imax = 250mA Li = 0 T4 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC All ST 3000 models except STG19L, STG99L, STG170 and STG180 have een registered in all provinces and territies in Canada and are marked CRN: 0F8914.5C.

11 ST 3000 Smart Pressure Transmitter 11 IECEx International Electrotechnical Commission (LCIE) Type of Protection Flameproof, Zone 1: Ex d IIC, Intrinsically Safe, Zone 0/1: Ex ia IIC, Comm. Option All 4-20 ma / DE 4-20 ma / HART Fieldus (Not FISCO) * Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected. Field Parameters All Ui = 30V Ii = 100mA Ui = 30V Ii = 100mA Ui = 24V Ii = 250mA Li = 0 Temp. Codes T5 Ta = 50 to 93ºC T6 Ta = 50 to 78ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC Type of Protection Comm. Option Field Parameters Temp. Codes Flameproof, Zone 1: Ex d IIC, All All T5 Ta = 50 to 93ºC T6 Ta = 50 to 78ºC 4-20 ma / DE Ui = 30V Ii = 100mA T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC Intrinsically Safe, Zone 0/1: Ex ia IIC, 4-20 ma / HART Ui = 30V Ii = 100mA T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC Fieldus (Not FISCO) Ui = 24V Ii = 250mA Li = 0 T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC SAEx (South Africa) Multiple Marking: Flameproof, Zone 1: Ex d IIC, 4-20 ma / DE Ui = 30V Ii = 100mA T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC Intrinsically Safe, Zone 0/1: Ex ia IIC, NOTE: The user must determine the type of protection required f installation of the equipment. The user shall then check the ox [ ] adjacent to the type of protection used on the equipment certification nameplate. Once a type of protection has een checked on the nameplate, susequently the equipment shall not e reinstalled using any of the other certification types ma / HART Fieldus (Not FISCO) Ui = 30V Ii = 100mA Ui = 24V Ii = 250mA Li = 0 T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC * Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected.

12 12 ST 3000 Smart Pressure Transmitter Type of Protection Comm. Option Field Parameters Temp. Codes Flameproof, Zone 0:, Ex td All All A20 IP6X T95ºC Ta = 93ºC T80ºC Ta = 78ºC Flameproof, Zone 1:, Ex d IIC, Ex td All All T5 Ta = 50 to +93ºC T6 Ta = 50 to +78ºC, A21 IP6X T95ºC Ta = 93ºC T80ºC Ta = 78ºC Intrinsically Safe, Zone 0/1:, Ex ia IIC, 4-20 ma / DE 4-20 ma / HART Ui = 30V Ii = 100mA Ui = 30V Ii = 100mA T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC Fieldus (Not FISCO) Ui = 24V Ii = 250mA Li = 0 T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC 4-20 ma / DE Ui = 30V Ii = 100mA T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC ATEX (LCIE) Non-Sparking, Zone 2:,Ex na IIC (Honeywell), 4-20 ma / HART Ui = 30V Ii = 100mA T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC Fieldus (Not FNICO) Ui = 24V Ii = 250mA Li = 0 T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC Multiple Marking: Flameproof, Zone 1:, Ex d IIC 4-20 ma / DE Ui = 30V Ii = 100mA T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC Intrinsically Safe, Zone 0/1:, Ex ia IIC Non-Sparking, Zone 2:, Ex na IIC 4-20 ma / HART Ui = 30V Ii = 100mA T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC NOTE: The user must determine the type of protection required f installation of the equipment. The user shall then check the ox [ ] adjacent to the type of protection used on the equipment certification nameplate. Once a type of protection has een checked on the nameplate, susequently the equipment shall not e reinstalled using any of the other certification types. * Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected. Fieldus (Not FISCO/FNICO) Ui = 24V Ii = 250mA Li = 0 T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC

13 ST 3000 Smart Pressure Transmitter 13 INMETRO (CERTUSP) Brazil Type of Protection Comm. Option Field Parameters Temp. Codes Flameproof, Zone 1: BR-Ex d IIC Intrinsically Safe, Zone 0/1: BR-Ex ia IIC All 4-20 ma / DE 4-20 ma / HART Fieldus (Not FISCO) Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected. All Ui = 30V Ii = 100mA Ui = 30V Ii = 100mA Ui = 24V Ii = 250mA Li = 0 T5 Ta = 50 to 93ºC T6 Ta = 50 to 78ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC This certificate defines the certifications covered f the ST 3000 Pressure Transmitter family of products, including the SMV 3000 Smart Multivariale Transmitter. It represents the compilation of the five certificates Honeywell currently has covering the certification of these products into marine applications. F ST 3000 Smart Pressure Transmitter and SMV 3000 Smart Multivarile Transmitter ST 3000 Pressure Transmitter Marine Certificate (MT Option) American Bureau of Shipping (ABS) Steel Vessel Rules 1-1-4/3.7, 4-6-2/5.15, 4-8-3/13 & 13.5, 4-8-4/27.5.1, 4-9-7/13. Certificate numer: 04-HS PDA Bureau Veritas (BV) - Product Code: 389:1H. Certificate numer: 12660/B0 BV Det Nske Veritas (DNV) - Location Classes: Temperature D, Humidity B, Viration A, EMC B, Enclosure C. F salt spray exposure; enclosure of 316 SST 2-part epoxy protection with 316 SST olts to e applied. Certificate numer: A Kean Register of Shipping (KR) - Certificate numer: LOX17743-AE001 Lloyd's Register (LR) - Certificate numer: 02/60001(E1) & (E2)

14 14 ST 3000 Smart Pressure Transmitter The ST 3000 Smart Pressure Transmitters are in confmity with the essential requirements of the Pressure Equipment Directive. European Pressure Equipment Directive (PED) (97/23/EC) Honeywell ST 3000 Smart Pressure Transmitters are designed and manufactured in accdance with the applicale ptions of Annex I, Essential Safety Requirements, and sound engineering practices. These transmitters have no pressurized internal volume, have a pressurized internal volume rated less than 200 ar (2,900 psig), and/ have a maximum volume of less than 0.1 liter (Article 3, 1.1.(a) first indent, Group 1 fluids). Therefe, these transmitters are not suject to the essential requirements of the directive 97/23/EC (PED, Annex I) and shall not have the CE mark applied. F transmitters rated > 200 ar (2,900 psig) < 1,000 ar (14,500 psig) Honeywell maintains a technical file in accdance with Annex, Module A, (internal production control) when the CE mark is required. Transmitter Attachments: Diaphragm Seals, Process Flanges and Manifolds comply with Sound Engineering Practice. NOTE: Pressure transmitters that are part of safety equipment f the protection of piping (systems) vessel(s) from exceeding allowale pressure limits, (equipment with safety functions in accdance with Pressure Equipment Directive 97/23/EC article 1, 2.1.3), require separate examination. A fmal statement from TÜV Industry Service Group of TÜV America, Inc., a division of TÜV Süddeutschland, a Notified Body regarding the Pressure Equipment Directive, can e found at A hard copy may e otained y contacting a Honeywell representative. CE Mark Recommended Frequency of Caliration Approved Manufacturing Locations Electro Magnetic Compatiility (EMC) (2004/108/EC) All Models: EN : 1992; EN :1995; EN : A1, A2, and A3 Industrial Locations Honeywell recommends verifying the caliration of these devices once every four years. Honeywell Process Solutions - Yk, PA USA Honeywell (Tianjin) Limited Tianjin, P.R. China Honeywell Automation India Ltd. Pune India Foundation TM Fieldus is a trademark of the Fieldus Foundation. Viton is a registered trademark of DuPont HART is a registered trademark of HART Communications Foundation. Teflon is a registered trademark of DuPont. Hastelloy C-276 is a registered trademark of Haynes International. DC 200 is a registered trademark of Dow Cning. Monel 400 is a registered trademark of Special Metals Cpation. FM Approvals SM is a service mark of FM Gloal ST 3000 and Experion are registered trademarks of Honeywell International Inc.

15 ST 3000 Smart Pressure Transmitter 15 Mounting Figure 3 Examples of typical mounting positions f dual-head models STG944 and STG Figure 4 Examples of typical mounting positions f in-line models STG94L, STG97L, STG98L, and STG99L. Note that a mounting racket is not required f in-line models.

16 16 ST 3000 Smart Pressure Transmitter Reference Dimensions millimeters inches Figure 5 Typical mounting dimensions f dual-head models STG944 and STG974 f reference

17 ST 3000 Smart Pressure Transmitter 17 Reference Dimensions millimeters inches With Smart meter With Analog meter Removal Clearance f All Caps Without meter Without meter Plug /2" NPT Optional meters / 238.3* 8.40 / 9.38 Optional external ground 158 / 183* 6.22 / 7.20 Rotational lock Other Connects 1/2" NPT Pressure Connection /16 Aminco Pressure Connection ½ NPT male DIN19213 *Dimensions vary due to slight differences in electronics housing designs Bottom view of DIN Figure 6 Typical mounting dimensions f in-line models STG94L, STG97L, STG98L, and STG99L f reference

18 18 ST 3000 Smart Pressure Transmitter Options Mounting Bracket (Options MB, MX, SB, SX, FB) The angle mounting racket is availale in either zincplated caron steel stainless steel and is suitale f hizontal vertical mounting on a two inch (50 millimeter) pipe, as well as wall mounting. An optional flat mounting racket is also availale in caron steel f two inch (50 millimeter) pipe mounting. Indicating Meter (Options ME and SM) Two integral meter options are availale. An analog meter (option ME) is availale with a 0 to 100% linear scale. The Smart Meter (option SM) provides an LCD display f oth analog and digital output and can e configured to display pressure in pre-selected engineering units. Lightning Protection (Option LP) A terminal lock is availale with circuitry that protects the transmitter from transient surges induced y neary lightning strikes. HART Protocol Compatiility (Options HC and H6) NAMUR NE43 Compliance (Option NE) This option provides software the meets the NAMUR NE43 requirements f failsafe software. Transmitter failure infmation is generated when the measuring infmation is no longer valid. Transmitter failure values are: 3.6 ma and 21.0 ma. The nmal ST 3000 ranges are 3.8 ma and 20.5 ma. Indicat Configuration (Option CI) Provides custom configuration of Smart Meters. Tagging (Option TG) Up to 30 characters can e added on the stainless steel nameplate mounted on the transmitter s electronics housing at no extra cost. Note that a separate nameplate on the meter ody contains the serial numer and ody-related data. A stainless steel wired on tag with additional data of up to 4 lines of 28 characters is also availale. The numer of characters f tagging includes spaces. Optional electronics modules f the ST 3000 provide Transmitter Configuration (Option TC) HART Protocol compatiility in either HART 5.x 6.x fmats. Transmitters with a HART Option are compatile with any HART enaled system that provides 5.x 6.x fmat suppt. The facty can configure the transmitter linear/square root extraction, damping time, LRV, URV and mode (analog/digital) and enter an ID tag of up to eight characters and scratchpad infmation as specified. Foundation TM Fieldus (Option FF) Custom Caliration and ID in Memy (Option CC) Equips transmitter with FF protocol f use in kit/s FF netwks. See document 34-ST f additional infmation on ST 3000 Fieldus transmitters. The facty can calirate any range within the scope of the transmitter s range and enter an ID tag of up to eight characters in the transmitter s memy. SIL2/SIL3 Certification (Option SL) This ST 3000 product is availale f use with safety systems. With the SL option, we are fully certified to SIL 2 capaility f single transmitters and SIL 3 capaility f multiple transmitter use through TÜV Nd Sys Tec GmH & Co. KG. We are in compliance with the following SIL standards: IEC : 1998; IEC : 2000; IEC : 1998

19 ST 3000 Smart Pressure Transmitter 19 Ordering infmation Contact your nearest Honeywell sales office, visit Honeywell on the Wld Wide We at: ASIA PACIFIC Control Products Asia Pacific Headquarters Phone: +(65) Fax: +(65) Asia Pacific Gloal Technical Suppt Field Instruments Phone: Fax: Process Instruments Phone: (603) Fax: (603) Australia Honeywell Limited Phone: +(61) FAX: +(61) Toll Free Toll Free Fax: China PRC - Beijing Honeywell China Inc. Phone: +(86-10) Fax: +(86-10) China PRC - Shanghai Honeywell China Inc. Phone: (86-21) Fax: (86-21) China PRC - Chengdu Honeywell China Inc. Phone: +(86-28) Fax: +(86-28) China PRC - Xi an Honeywell China Ltd - Xi an. Phone: +(86-29) Fax: +(86-29) China PRC - Shenzhen- Honeywell China Inc. Phone: +(86) Fax: +(86) Indonesia PT Honeywell Indonesia Phone: +(62) FAX: +(62) India Automation India Ltd. Honeywell Ltd. Phone:+(91) Fax: +(91) Japan Honeywell Inc. Phone: +(81) Fax: +(81) Malaysia Honeywell Engineering Sdn Bhd Phone: +(60-3) Fax: +(60-3) New Zealand Honeywell Limited Phone: +(64-9) Fax: +(64-9) Toll Free (0800) Philippines Honeywell Systems (Philippines) Inc. Phone: +(63-2) / Fax: +(63-2) Singape Honeywell Pte Ltd. Phone: +(65) Fax: +(65) South Kea Honeywell Kea Co Ltd Phone: +(822) Fax: +(822) Thailand Honeywell Systems (Thailand) Ltd. Phone: +(662) FAX: +(662) Taiwan R.O.C. Honeywell Taiwan Ltd. Phone: +(886-2) FAX: +(886-2) SE Asia Countries see Honeywell Pte Ltd (Singape) f: Pakistan Camodia Guam Laos Myanmar Vietnam East Tim SE Asia Countries see Honeywell Automation India Ltd f: Bangladesh Nepal Sri Lanka EUROPE Austria Honeywell Austria GmH Phone: +43 (316) FAX: +43 (316)40017 Belgium Honeywell SA/NV Phone: +32 (0) FAX: +32 (0) Bulgaria Honeywell EOOD Phone: +(359) FAX: +(359) Czech Repulic Honeywell spol. s.r.o. Phone: FAX: Denmark Honeywell A/S Phone: +(45) FAX: +(45) Finland Honeywell OY Phone: +358 (0) FAX: +358 (0) France Honeywell SA Phone: +33 (0) FAX: +33 (0) Germany Honeywell AG Phone: +49 (69) FAX: +49 (69) Hungary Honeywell Kft. Phone: FAX: Italy Honeywell S.p.A. Phone: / 395 FAX: The Netherlands Honeywell B.V. Phone: +31 (0) FAX: +31 (0) Nway Honeywell A/S Phone: (45) Poland Honeywell Sp. zo.o Phone: FAX: Ptugal Honeywell Ptugal Lda Phone: FAX: Romania Honeywell Bucharest Phone: +40 (0) FAX: +40 (0) Russian Federation (RF), ZAO "Honeywell" Phone: +7 (095) FAX: +7 (495) Slovak Repulic Honeywell s.r.o. Phone: FAX: Spain Honeywell S.A. Phone: +34 (0) FAX: +34 (0) Sweden Honeywell AB Phone: +(46) FAX: +(46) Switzerland Honeywell AG Phone: FAX: +(41) Turkey Honeywell Turkey A.S. Phone: FAX: Ukraine Honeywell Tel: Fax: United Kingdom Honeywell Control Systems Ltd. Phone: +44 (0) FAX: +44 (0) MIDDLE EAST Au Dhai U A E Middle East Headquarters Honeywell Middle East Ltd. Phone: FAX: Sultanate of Oman Honeywell & Co Oman LLC Phone: / Ext.33 FAX Saudi Araia Honeywell Turki Araia Ltd Juail Office Phone: Fax: Honeywell - ATCO Dammam Office Phone: Fax: Kuwait Honeywell Kuwait KSC Phone: to 30 Fax: and Phone: /1821 Fax: AFRICA Mediterranean & African Distriuts Honeywell SpA Phone: +39 (02) FAX: +39 (02) South Africa (Repulic of) and su saharan Honeywell Southern Africa Honeywell S.A. Pty. Ltd. Phone: FAX NORTH AMERICA Canada Honeywell LTD Phone: FAX: USA Honeywell Process Solutions, Phone: Or askssc@honeywell.com SOUTH AMERICA Argentina Honeywell S.A.I.C. Phone: +(54-11) FAX: +(54-11) Brazil Honeywell do Brasil & Cia Phone: +(55-11) FAX: +(55-11) Chile Honeywell Chile, S.A. Phone: +(56-2) FAX: +(56-2) Mexico Honeywell S.A. de C.V. Phone: +(52) FAX: +(52) Puerto Rico Honeywell Inc. Phone: +(809) FAX: +(809) Trinidad Honeywell Inc. Phone: +(868) FAX: +(868) Venezuela Honeywell CA Phone: +(58-2) FAX: +(58-2) Specifications are suject to change without notice. (Note that specifications may differ slightly f transmitters manufactured efe Octoer 30, 1995).

20 20 ST 3000 Smart Pressure Transmitter Model Selection Guides are suject to change and are inserted into the specifications as guidance only. Pri to specifying dering a model check f the latest revision Model Selection Guides which are pulished at: Model Selection Guide (34-ST-16-26) ST 3000 Smart Transmitter Dual Head Gage Pressure (GP) and Single Head Asolute Pressure (AP) Series ST-16U-26 Issue 52 Page 1 of 5 Model Selection Guide Instructions Select the desired Key Numer. The arrow to the right marks the selection availale. Make one selection from each tale, I and II, using the column elow the proper arrow. Select as many Tale options as desired (if no options approvals are desired, specify 9X). A ( ) denotes unrestricted availaility. A letter denotes restricted availaility. Restrictions follow Tale IV. Key Numer I II (Optional) - _ - _ -,, + IV XXXX KEY NUMBER Span Gage 0-20 to psi/0-1.4 to 0-35 ar Pressure to 0-3,000 psi/0-21 to ar Asolute 0-50 to mmhga/0-67 to 0-1,040 mara Pressure 0-20 to psia/0-1.4 to 0-35 ara Selection STG944 STG974 STA922 STA940 Avail. Imptant Note: Base STA and STG models no longer include a default communications option. All units now require the selection of a communication option from Tale (AN, DE, HC, H6 FF). TABLE I - METER BODY Wetted Process Vent/Drain Valves Head 13 2 Barrier Diaphragms Selection Caron Steel SS 316L SS A Caron Steel SS Hastelloy C B Caron Steel SS Monel C 19 Caron Steel SS Tantalum D 316 SS SS 316L SS E Materials of 316 SS SS Hastelloy C F Construction 316 SS SS Monel G SS SS Tantalum H Hastelloy C-276 3, 6 Hastelloy C Hastelloy C J Hastelloy C-276 3, 6 Hastelloy C Tantalum K Monel 400 4, 7 Monel Monel L 19 Fill Fluid Silicone DC _ 1 _ CTFE _ 2 _ 1/4" NPT A Process Head 1/2" NPT with Adapter G t Configuration 1/2" NPT G TABLE II No Selection Caron Steel heads are zinc-plated and not recommended f water service due to hydrogen migration. F that service, use 316 stainless steel Wetted Process Heads. 2 Vent/Drains are sealed with Teflon PTFE 3 Hastelloy C-276 UNS N Monel 400 UNS N Supplied as 316 SS as Grade CF8M, the casting equivalent of 316 SS. 6 Supplied as indicated as Grade CW12MW, the casting equivalent of Hastelloy C Supplied as indicated as Grade M30C, the casting equivalent of Monel Monel 400 UNS N04400 UNS N The standard reference head f the STG9XX is caron steel (zinc-plated). See Tale f a stainless steel reference (HR) head option. 14 If STA922 operating elow 50mm HgA, see Fig. 2 in Specification 34-ST and contact Marketing Applications f a "Special" Silicone DC 704 quote Note: End vent drain valve standard f STG9XX. End vent drain valves are not availale on STA9XX.

21 ST 3000 Smart Pressure Transmitter ST-16U-26 Issue 52 Availaility Page 2 of 5 STG9xx STA9xx TABLE - OPTIONS Selection Communication Options (Must choose a communications option) Analog only (can e configured using appropriate Honeywell DE tool) AN DE Protocol communications DE HART 5.x Protocol Compatile Electronics HC HART 6.x Protocol Compatile Electronics H6 FOUNDATION TM Fieldus Communications FF r r Indicating Meter Options Analog Meter (0-100 Even 0-10 Square Root) ME Smart Meter SM Custom Configuration of Smart Meter CI m m Local Zero LZ x Local Zero and Span ZS s Transmitter Housing & Electronics Options NAMUR Failsafe Software NE SIL 2 - TÜV Certified transmitter (requires HC/H6 and WP options) SL p p Lightning Protection LP Custom Caliration and I.D. in Memy CC Transmitter Configuration - (non-fieldus) TC Transmitter Configuration - (Fieldus) FC Write Protection (Delivered in the "enaled" position) WP Write Protection (Delivered in the "disaled" position) WX 316 SS 5 Electronics Housing - with M20 Conduit Connections SH n n 1/2" NPT to M SS Conduit Adapter (BASEEFA EEx d IIC) A1 n n 1/2" NPT to 3/4" NPT 316 SS Conduit Adapter A2 316 SS 5 Housing with M20 to 1/2" NPT 316 SS Conduit Adapter (use f FM and CSA Approvals) A3 i i Stainless Steel Customer Wired-On Tag (4 lines, 28 characters per line, customer supplied infmation) TG Stainless Steel Customer Wired-On Tag (lank) TB Low Temperature o C Amient Limit End Cap Live Circuit Warning Lael in Spanish (only with ATEX 3D) LT SP z a a End Cap Live Circuit Warning Lael in Ptuguese (only with ATEX 3D) PG a a End Cap Live Circuit Warning Lael in Italian (only with ATEX 3D) End Cap Live Circuit Warning Lael in German (only with ATEX 3D) Meter Body Options (Seal olt material depends on Transmitter olt material) A286 SS (NACE) Bolts and 304 SS (NACE) Nuts f Process Heads 316 SS Bolts and 316 SS Nuts f Process Heads B7M Bolts and Nuts f Process Heads 316 SS 5 Adapter Flange - 1/2" NPT with CS Bolts 316 SS 5 Adapter Flange - 1/2" NPT with 316 SS Bolts 316 SS 5 Adapter Flange - 1/2" NPT with NACE A286 SS Bolts 316 SS 5 Adapter Flange - 1/2" NPT with B7M Bolts Hastelloy C-276 3, 6 Adapter Flange - 1/2" NPT with CS Bolts Hastelloy C-276 3, 6 Adapter Flange - 1/2" NPT with 316 SS Bolts Monel 400 4, 7 Adapter Flange - 1/2" NPT with CS Bolts Monel 400 4, 7 Adapter Flange - 1/2" NPT with 316 SS Bolts 316 SS 5 Blind Adapter Flange with CS Bolts 316 SS 5 Blind Adapter Flange with 316 SS Bolts 316 SS 5 Blind Adapter Flange with NACE A286 SS Bolts 316 SS 5 Blind Adapter Flange with B7M Bolts 316 SS Center Vent Drain and Bushing Side Vent/Drain (End Vent Drain is standard) Viton 8 Process Head Gaskets Graphite Process Head Gasket Viton 8 Adapter Flange Gaskets 316 SS Reference Head (Caron Steel Standard) Modified DIN Process Heads SS 3 Hastelloy C-276 UNS N Monel 400 UNS N Supplied as 316 SS as Grade CF8M, the casting equivalent of 316 SS. 6 Supplied as indicated as Grade CW12MW, the casting equivalent of Hastelloy C Supplied as indicated as Grade M30C, the casting equivalent of Monel Viton Fluocaron Elastomer TL GE a a a a CR SS B7 S2 c S3 c S4 c S5 c T2 c T3 c V2 c V3 c B3 B4 B5 B6 CV SV VT GF VF 17 HR DN v Tale continued next page

22 22 ST 3000 Smart Pressure Transmitter 34-ST-16U-26 Issue 52 Page 3 of 5 TABLE - OPTIONS (continued) Transmitter Mounting Bracket Options Angle Mounting Bracket - Caron Steel Marine Approved Angle Mounting Bracket - Caron Steel Angle Mounting Bracket SS Marine Approved Angle Mounting Bracket SS Flat Mounting Bracket (pipe mounting) - Caron Steel Diaphragm Options Gold plated diaphragm(s) on 316 SS Gold plated diaphragm(s) on Monel Hastelloy C ONLY Services/Certificates/Marine Type Approval Options User's Manual Paper Copy (Standard, HC, H6 FF ships accdingly) Clean Transmitter f Oxygen Chline Service with Certificate Over-Pressure Leak Test with F3392 Certificate Caliration Test Rept and Certificate of Confmance (F3399) Certificate of Confmance (F3391) Certificate of Origin (F0195) FMEDA Certificate (SIL 1) (FC33321) SIL Certificate (SIL 2/3) (FC33337) NACE Certificate (Process-Wetted & Non-Process Wetted) (FC33339) NACE Certificate (Process-Wetted) (FC33338) Material Traceaility Certification per EN (FC33341) Marine Type Approvals (DNV, ABS, BV, KR & LR) (FC33340) Warranty Options Additional Warranty - 1 year Additional Warranty - 2 years Additional Warranty - 3 years Additional Warranty - 4 years 3 Hastelloy C-276 UNS N Monel 400 UNS N04400 STG9xx Selection MB MX SB SX FB G1 G2 UM 0X h h TP F1 F3 F5 F6 FE F7 o o FG FX MT 2 2 W1 W2 W3 W4 STA9xx Approval Approval Type Location Classification Selection Body No hazardous location approvals 9X Explosion Proof Class I, Div. 1, Groups A,B,C,D Dust Ignition Proof Class II, Div. 1, Groups E,F,G FM Non-Incendive Approvals SM Class I, Div. 2, Groups A,B,C,D 1C Class I, II,, Div. 1, Groups Intrinsically Safe A,B,C,D,E,F,G Canadian Explosion Proof Class I, Div. 1, Groups B,C,D Standards Dust Ignition Proof Class II,, Div. 1, Groups E,F,G 2J f Association Class I, II,, Div. 1, Groups Intrinsically Safe (CSA) A,B,C,D,E,F,G Ex d IIC; T5 (Ta = -40 to +93ºC), T6 (Ta = - Flameproof, Zone 1 40 to +78ºC) IECEx Ex ia IIC; T3, T4, T5, T6 CA Intrinsically Safe, (See Spec f detailed temperature codes y Zone 0/1 Communications option) Intrinsically Safe, Ex ia IIC T4, T5, T6 Z2 Zone 0/1 SAEx Flameproof, Zone 1 EX d IIC T5, T6 ZD (South Africa) Multiple Marking 11 Ex ia IIC T4, T5, T6 Int. Safe, Zone 0/1, Ex d IIC T5, T6 ZA Flameproof, Zone 1 Flameproof, Zone 1 BR- Ex d IIC T5, T6 6D CERTUSP INMETRO BR- Ex ia IIC; T4, T5, T6 Intrinsically Safe, Zone 0/1 6S (Brazil) (See CERTUSP certificate f detailed temperature codes y Communications option) Approvals continued on next page 11 The user must determine the type of protection required f installation of the equipment. The user shall then check the ox [ ] adjacent to the type of protection used on the equipment certification nameplate. Once a type of protection has een checked on the nameplate, susequently the equipment shall not e reinstalled using any of the other certification types.

23 ST 3000 Smart Pressure Transmitter ST-16U-26 Issue 52 Page 4 of 5 STG9xx Approval Body Tale (con't) Approval Approval Type Location Classification Selection Body ATEX 10 (LCIE) Intrinsically Safe Zone 0 Intrinsically Safe Dust-Ignitionproof, Zone 0 Flameproof, Zone 1 Multiple Marking 11 Int. Safe, Zone 0/1, Flameproof, Zone 1, Non-Sparking, Zone 2 Ex ia IIC T4 (Ta = 50 C to +93 C); T5 (Ta = 50 C to +85 C); T6 (Ta = 50 C to +70 C) Ex ia IIC T4 (Ta = 50 C to +93 C); T5 (Ta = 50 C to +85 C); T6 (Ta = 50 C to +70 C) Ex td A20 IP6X T95 C (at Ta = 93 C) T80 C (at Ta = 78 C) Ex d IIC T5 (Ta = 40 C to +93 C), T6 (Ta = 40 C to +78 C) Supply 11-42Vdc Ex td A21 IP6X T95 C (at Ta = 93 C) T80 C (at Ta = 78 C) Ex ia IIC T4 (Ta = 50 C to +93 C); T5 (Ta = 50 C to +85 C); T6 (Ta = 50 C to +70 C); Ui = 30V; Ii = 100mA Ex td A20 IP6X T95 C (at Ta = 93 C) T80 C (at Ta = 78 C) Ex d IIC T5 (Ta = 40 C to +93 C), T6 (Ta = 40 C to +78 C) Supply 11-42Vdc Ex td A21 IP6X T95 C (at Ta = 93 C) T80 C (at Ta = 78 C) Ex na, IIC T5 (Ta = 40 C to +93 C), T6 (Ta = 40 C to +78 C); Zone 2 Supply < 42Vdc, 23mA Ex td A22 IP6X T95 C (at Ta = 93 C) T80 C (at Ta = 78 C) (Honeywell) 3S 33 Availaility C STA9xx 10 See ATEX installation requirements in the ST 3000 User's Manual 11 The user must determine the type of protection required f installation of the equipment. The user shall then check the ox [ ] adjacent to the type of protection used on the equipment certification nameplate. Once a type of protection has een checked on the nameplate, susequently the equipment shall not e reinstalled using any of the other certification types. TABLE IV Selection Facty Identification XXXX

24 24 ST 3000 Smart Pressure Transmitter 34-ST-16U-26 Issue 52 Page 5 of 5 RESTRICTIONS Restriction Availale Only With Not Availale With Letter Tale Selection Tale Selection a 33 3C Select only one option from this group c I G Key # STG974 f I L h I _ 2 _ i 1C 2J m SM n 1C, 2J o CR, S4, B5 p HC H6 and WP FF, 00 r TC, ME, CA s FF, ME Select from Tale t S2, S3, S4, S5, T2, T3, V2, V3 v I E _ G, F _ G x FF, SM z Key # STG974 2 MX, SX FB, MB, SB 15 FF 17 VT 19 F7, FG 21 FF 22 SL 23 SH A3 Ordering Example: STG944-A1A HC,LP,2J+XXXX Hastelloy is a registered trademark of Haynes International Monel 400 is a registered trademark of Special Metals Cpation. HART is a registered trademark of HART Communication Foundation. FOUNDATION TM Fieldus is a trademark of Fieldus Foundation. Viton is a registered trademark of DuPont Perfmance Elastomers. Teflon is a registered trademark of DuPont. FM Approvals SM is a service mark of FM Gloal DC 200 and DC 704 are registered trademarks of Dow Cning

25 ST 3000 Smart Pressure Transmitter 25 Model Selection Guides are suject to change and are inserted into the specifications as guidance only. Pri to specifying dering a model check f the latest revision Model Selection Guides which are pulished at: Model Selection Guide (34-ST-16-28) ST 3000 Smart Transmitter In-Line Gage & Asolute Pressure Series ST-16U-28 Issue 46 Page 1 of 4 Model Selection Guide Instructions Select the desired Key Numer. The arrow to the right marks the selection availale. Make one selection from each tale, I and II, using the column elow the proper arrow. Select as many Tale options as desired (if no options are desired, specify 9X). A ( ) denotes unrestricted availaility. A letter denotes restricted availaility. Restrictions follow Tale IV. Key Numer I II (Optional) IV - _ - _ -,, + XXXX KEY NUMBER Gage Pressure Asolute Pressure Span 0-20 to psig/0-1.4 to 0-35 ar to 0-3,000 psig/0-21 to ar to 0-6,000 psig/0-35 to ar to 0-10,000 psig/0-35 to ar 0-50 to mmhg/0-67 to 0-1,040 mara 0-20 to psia/0-1.4 to 0-35 ara Selection STG94L STG97L STG98L STG99L STA92L STA94L Avail. Imptant Note: Base STA and STG models no longer include a default communications option. All units now require the selection of a communication option from Tale (AN, DE, HC, H6 FF). TABLE I - METER BODY Materials of Construction Fill Fluid Process Connection Configuration TABLE II No Selection Wetted Process Heads 316 SS 316 SS Vent/Drain Valves 1 Barrier Diaphragms Selection L SS E -- Hastelloy C F DC 200 Silicone _ 1 _ CTFE _ 2 _ 9/16" - 18 Aminco A 1/2" NPT (female) G 1/2" NPT (male) H DIN D Vent/Drains are sealed with Teflon PTFE 2 Hastelloy C-276 UNS N10276 Ordering Example: STG94L-E1A AN,9X+XXXX