ST 3000 Smart Pressure Transmitter Series 100 Differential Pressure Models Specifications 34-ST July 2010

Transcription

1 ST 3000 Smart Pressure Transmitter Series 100 Differential Pressure Models Specifications 34-ST July 2010 Introduction In 1983, Honeywell introduced the first Smart Pressure Transmitter the ST In 1989, Honeywell launched the first all digital, i-directional protocol f smart field devices. Today, its ST 3000 Series 100 Differential Pressure Transmitters continue to ring proven smart technology to a wide spectrum of pressure measurement applications, from furnace comustion airflow rate to hydrostatic tank gauging. The ST 3000 Series 100 (S100) Differential Pressure Transmitter can e used with any primary flow element to provide proven, repeatale flow measurement. Models STD110 0 to 10 inh 2O 0 to 25 mar STD120 0 to 400 inh 2O 0 to 1,000 mar STD125 0 to 600 inh 2O 0 to 1,500 mar STD130 0 to 100 psi 0 to 7,000 mar STD170 0 to 3,000 psi 0 to 210,000 mar All ST 3000 transmitters can e dered to provide one of the following output communication options. Communications options 4-20 ma Honeywell Digitally Enhanced (DE) HART (versions 5.x 6.x) FOUNDATION Fieldus Figure 1 - Series 100 Differential Pressure Transmitters feature field-proven piezesistive sens technology When digitally integrated with Honeywell s Experion Process Knowledge System other TDC/TPS systems, ST 3000 instruments provides local measurement accuracy to the system level without adding typical A/D and D/A converter inaccuracies as well as providing advantages from the many other on-oard advanced diagnostic features. Honeywell s high-perfmance ST 3000 S100 transmitters lead the industry in: Accuracy Staility Reliaility Rangeaility Warranty

2 2 ST 3000 Smart Pressure Transmitter ST 3000 Lifetime Transmitter Benefits Total Accuracy = ±0.0375% Staility = ±0.01% per year Reliaility = 470 years MTBF Rangeaility = 400 to 1 Lifetime Warranty = 15 years The devices provide comprehensive self-diagnostics to help users maintain high uptime, meet regulaty requirements, and attain high quality standards. S100 transmitters are ideal f critical applications, such as custody transfer of natural gas and energy and material alances, where accuracy and staility are imptant. Description The ST 3000 transmitter can replace any 4 to 20 ma output transmitter in use today and operates over a standard twowire system. The measuring means is a piezesistive sens, which actually contains three senss in one. It uses a differential pressure sens, a temperature sens and a static pressure sens in delivering the most comprehensive compensated output signal availale today. Microprocess-ased electronics provide higher spanturndown ratio, improved temperature and pressure compensation, and improved accuracy. The transmitter s meter ody and electronics housing resist shock, viration, crosion, and moisture. The electronics housing contains a compartment f the single-oard electronics, which is isolated from an integral junction ox. The single-oard electronics is replaceale and interchangeale with any other ST 3000 Series 100 Series 900 model transmitters. Advanced Diagnostics ST 3000 is now availale f oth HART 6 and Foundation TM Fieldus with advanced diagnostics that minimize unplanned plant outages, minimize maintenance costs and y providing the industry s most reliale transmitter. Provide advanced warning of possile failure events and avoid costly shutdowns. Three levels of failure repting Comprehensive list of on-oard diagnostics (Ref. ST 3000 User manual with HART 6, 34-ST Rev: June 09 and Foundation TM Fieldus option manual 34- ST Rev: June 09) Configuration Tools Like other Honeywell transmitters, the ST 3000 features two-way communication and configuration capaility etween the operat and the transmitter through several Honeywell field-rated ptale configuration devices, including the Smartline Configuration Toolkit and the Multiple Communication Configurat (MC ToolKit). While oth are made f in-field use, the MC Toolkit also can e dered f use in intrinsically safe, Class I, Div. 1 environments. The SCT 3000 Smartline Configuration Toolkit provides an easy way to configure instruments using a personal computer as the configuration interface. The toolkit enales configuration of devices efe shipping pri to field installation. The SCT 3000 can operate in the off-line mode to pre-configure an unlimited numer of devices. This dataase can then e loaded down-line during instrument commissioning. Features Choice of linear square root output confmity is a simple configuration selection. Direct digital integration with Experion PKS and other control systems provides local measurement accuracy to the system level without adding typical A/D and D/A converter inaccuracies. Unique piezesistive sens automatically compensates input f real-wld temperature and static pressure variations. Added smart features include configuring lower and upper range values, simulating accurate analog output, and selecting preprogrammed engineering units f display. Smart transmitter capailities with local remote interfacing means significant manpower efficiency improvements in commissioning, start-up, and ongoing maintenance functions. ST 3000 transmitters feature full Dual-Seal certification ased on ANSI/NFPA and ANSI/ISA requirements without the use of additional seal protection elements. ST 3000 transmitters are availale fully compliant to SIL 2/3 requirements as a standard option.

3 ST 3000 Smart Pressure Transmitter 3 Operating Conditions All Models Parameter Amient Temperature Reference Condition Rated Condition Operative Limits Transptation and Stage C F C F C F C F STD110 25±1 77±2-15 to 65 5 to to to to to 158 STD125 25±1 77±2-40 to to to to to to 257 STD120, STD130, STD170 25±1 77±2-40 to to to to to to 257 Meter Body Temperature STD110 25±1 77±2-15 to 65 5 to to to to to 158 STD125 25±1 77±2-40 to to to to to to 257 STD120, STD130, STD170 25±1 77±2-40 to to to to to to 257 Humidity %RH 10 to 55 0 to to to 100 Vac. Region Min. Pressure All Models Except STD110 mmhg asolute inh 2 O asolute Atmospheric Atmospheric (sht term ) 2 1 (sht term ) 2 Supply Voltage, Current, and Load Resistance Maximum Allowale Wking Pressure (MAWP) 4 (ST 3000 products are rated to Maximum Allowale Wking Pressure. MAWP depends on Approval Agency and transmitter materials of construction.) Voltage Range: 10.8 to 42.4 Vdc at terminals Current Range: 3.0 to 21.8 ma Load Resistance: 0 to 1,440 ohms (as shown in Figure 2) STD110 = 50 psi, 3.45 ar STD120, STD125, STD130 and STD170 = 4,500 psi, 310 ar 3 Static Pressure Limit = Maximum Allowale Wking Pressure (MAWP) = Overpressure Limit f ST 3000 Differential Pressure Transmitters 1 F CTFE fill fluid, the rating is -15 to 110C (5 to 230F) 2 Sht term equals 2 hours at 70C (158F) 3 MAWP applies f temperature range -40 to 125C. However, Static Pressure Limit is de-rated to 3,000 psi from -26C to -40C. Use of graphite o-rings de-rates transmitter to 3,625 psi. Use of adapt with graphite o-rings de-rates transmitter to 3,000 psi. 4 Consult facty f MAWP of ST 3000 transmitters with CSA approval Loop Resistance (ohms) Note: A minimum of 250 ohms of loop resistance is necessary to suppt communications. Loop resistance equals arrier resistance plus wire resistance plus receiver resistance. 250 = Operating Area Operating Voltage (Vdc) Figure 2 - Supply voltage and loop resistance chart

4 4 ST 3000 Smart Pressure Transmitter Perfmance Under Rated Conditions* - Model STD110 (0 to 10 inh 2 O) Parameter Description Upper Range Limit Minimum Span inh 2 O mar inh 2 O mar 10 (39.2F/4C is standard reference temperature f inh 2 O range.) Turndown Ratio 25 to 1 Zero Elevation and Suppression No limit except minimum span within ±100% URL. Accuracy (Reference Includes comined effects of linearity, hysteresis, and repeataility) Accuracy includes residual err after averaging successive readings. F FOUNDATION TM Fieldus use Digital Mode specifications. F HART use Analog Mode specifications. Zero Temperature Effect per 28C (50F) Comined Zero and Span Temperature Effect per 28C (50F) In Analog Mode: ±0.1% of calirated span upper range value (URV), whichever is greater, terminal ased. F URV elow reference point (1.5 inh 2 O), accuracy equals: inh 2O span inh 2O mar in % of span span mar In Digital Mode: ±0.0875% of calirated span upper range value (URV), whichever is greater, terminal ased. F URV elow reference point (1.5 inh 2 O), accuracy equals: inh 2O span inh 2O In Analog Mode: ±0.2625% of span. F URV elow reference point (10 inh inh 2O span inh 2O In Digital Mode: ±0.25% of span. F URV elow reference point (10 inh inh 2O span inh 2O mar in % of span span mar mar in % of span span mar 25 mar 0.25 in % of span span mar In Analog Mode: ±0.4875% of span. F URV elow reference point (10 inh inh 2O span inh 2O In Digital Mode: ±0.4625% of span. F URV elow reference point (10 inh inh 2O span inh 2O mar in % of span span mar mar in % of span span mar * Perfmance specifications are ased on reference conditions of 25C (77F), zero (0) static pressure, 10 to 55% RH, and 316 Stainless Steel arrier diaphragm.

5 ST 3000 Smart Pressure Transmitter 5 Perfmance Under Rated Conditions* - Model STD120 (0 to 400 inh 2 O) Parameter Description Upper Range Limit inh 2 O mar 400 (39.2F/4C is standard reference temperature f inh 2 O range.) 1,000 1 Note: Recommended minimum span in square root mode is 20 inh 2 O (50 mar). 2.5 Minimum Span inh 2 O mar Turndown Ratio 400 to 1 Zero Elevation and No limit except minimum span within ±100% URL. Specifications valid from -5 to Suppression +100% URL. Accuracy (Reference Includes In Analog Mode: ±0.0525% of calirated span upper range value (URV), whichever comined effects of linearity, is greater, terminal ased. hysteresis, and repeataility) F URV elow reference point (25 inh 2 O), accuracy equals: Accuracy includes residual err after averaging successive readings. F FOUNDATION TM Fieldus use Digital Mode specifications. F HART use Analog Mode specifications. Zero Temperature Effect per 28C (50F) Comined Zero and Span Temperature Effect per 28C (50F) Zero Static Pressure Effect per 1,000 psi (70 ar) Comined Zero and Span Static Pressure Effect per 1,000 psi (70 ar) Staility 25 inh 2 O 62 mar span inh2o in % of span span mar In Digital Mode: ±0.0375% of calirated span upper range value (URV), whichever is greater, terminal ased. F URV elow reference point (25 inh 2 O), accuracy equals: 25 inh 2 O 62 mar span inh2o in % of span span mar * F High Accuracy (HA) option: ±0.025% of calirated span upper range value (URV), whichever is greater, terminal ased. In Analog Mode: ±0.0625% of span. F URV elow reference point (50 inh 2 50 inh 2 O 125 mar in % of span span inh 2O span mar In Digital Mode: ±0.05% of span. F URV elow reference point (50 inh inh span inh 2 O 2O 125 mar 0.05 in % of span span mar In Analog Mode: ±0.10% of span. F URV elow reference point (50 inh 2 50 inh 2 O 125 mar in % of span span inh2o span mar In Digital Mode: ±0.075% of span. F URV elow reference point (50 inh inh2 O span inh2o 125 mar in % of span span mar ±0.075% of span. F URV elow reference point (50 inh 2 50 inh 2 O mar in % of span span inh2o span mar ±0.15% of span. F URV elow reference point (50 inh 2 50 inh 2 O mar in % of span span inh2o span mar ±0.01% of URL per year f lifetime * Perfmance specifications are ased on reference conditions of 25C (77F), zero (0) static pressure, 10 to 55% RH, and 316 Stainless Steel arrier diaphragm.

6 6 ST 3000 Smart Pressure Transmitter Perfmance Under Rated Conditions* - Model STD125 (0 to 600 inh 2 O) Parameter Description Upper Range Limit Minimum Span inh 2O mar inh 2 O mar 600 (39.2F/4C is standard reference temperature f inh 2 O range.) 1, Turndown Ratio 100 to 1 Zero Elevation and Suppression No limit except minimum span within 0 to 100% URL. Accuracy (Reference Includes In Analog Mode: ±0.075% of calirated span upper range value (URV), whichever is comined effects of linearity, greater, terminal ased. hysteresis, and repeataility) F URV elow reference point (25 inh 2 O), accuracy equals: Accuracy includes residual err after averaging successive 25 inh 2 O readings. 62 mar in % of span span inh O F FOUNDATION TM 2 span mar Fieldus use In Digital Mode: ±0.05% of calirated span upper range value (URV), whichever is Digital Mode specifications. greater, terminal ased. F HART use Analog Mode F URV elow reference point (25 inh specifications. 2 O), accuracy equals: 25 inh 2 O mar in % of span span inh2o span mar Zero Temperature Effect per In Analog Mode: ±0.0625% of span. 28C (50F) F URV elow reference point (50 inh 2 50 inh 2 O mar in % of span span inh2o span mar In Digital Mode: ±0.05% of span. F URV elow reference point (50 inh 2 50 inh2 O 125 mar in % of span span inh2o span mar Comined Zero and Span In Analog Mode: ±0.10% of span. Temperature Effect per 28C F URV elow reference point (50 inh 2 (50F) 50 inh 2 O mar in % of span span inh2o span mar In Digital Mode: ±0.075% of span. F URV elow reference point (50 inh 2 50 inh 2 O mar in % of span span inh2o span mar Zero Static Pressure Effect per ±0.075% of span. 1,000 psi (70 ar) F URV elow reference point (50 inh 2 50 inh 2 O mar in % of span span inh2o span mar Comined Zero and Span Static ±0.20% of span. Pressure Effect per 1,000 psi (70 F URV elow reference point (50 inh 2 ar) 50 inh 2 O mar in % of span span inh2o span mar Staility ±0.015% URL per year * Perfmance specifications are ased on reference conditions of 25C (77F), zero (0) static pressure, 10 to 55% RH, and 316 Stainless Steel arrier diaphragm.

7 ST 3000 Smart Pressure Transmitter 7 Perfmance Under Rated Conditions* - Model STD130 (0 to 100 psi) Parameter Description Upper Range Limit Minimum Span psi ar psi ar Turndown Ratio 100 to 1 Zero Elevation and Suppression No limit except minimum span within 18 and +100% URL. Specifications valid from 5 to +100% URL. Accuracy (Reference Includes comined effects of linearity, hysteresis, and repeataility) Accuracy includes residual err after averaging successive readings. F FOUNDATION TM Fieldus use Digital Mode specifications. F HART use Analog Mode specifications. Zero Temperature Effect per 28C (50F) Comined Zero and Span Temperature Effect per 28C (50F) Zero Static Pressure Effect per 1,000 psi (70 ar) Comined Zero and Span Static Pressure Effect per 1,000 psi (70 ar) Staility In Analog Mode: ±0.075% of calirated span upper range value (URV), whichever is greater, terminal ased. F URV elow reference point (15 psi), accuracy equals: 15 psi ar in % of span span psi span ar In Digital Mode: ±0.0625% of calirated span upper range value (URV), whichever is greater, terminal ased. F URV elow reference point (15 psi), accuracy equals: 15 psi ar in % of span span psi span ar In Analog Mode: ±0.0625% of span. F URV elow reference point (30 psi), effect equals: 30 psi ar in % of span span psi span ar In Digital Mode: ±0.05% of span. F URV elow reference point (30 psi), effect equals: 30 psi 2 ar in % of span span psi span ar In Analog Mode: ±0.10% of span. F URV elow reference point (30 psi), effect equals: 30 psi ar in % of span span psi span ar In Digital Mode: ±0.075% of span. F URV elow reference point (30 psi), effect equals: 30 psi ar in % of span span psi span ar ±0.075% of span. F URV elow reference point (30 psi), effect equals: 30 psi ar in % of span span psi span ar ±0.15% of span. F URV elow reference point (30 psi), effect equals: 30 psi ar in % of span span psi span ar ±0.04% of URL per year. * Perfmance specifications are ased on reference conditions of 25C (77F), zero (0) static pressure, 10 to 55% RH, and 316 Stainless Steel arrier diaphragm.

8 8 ST 3000 Smart Pressure Transmitter Perfmance Under Rated Conditions* - Model STD170 (0 to 3,000 psi) Parameter Description Upper Range Limit Minimum Span psi ar psi ar 3, Turndown Ratio 100 to 1 Zero Elevation and Suppression No limit except minimum span within 0.6 and +100% URL. Specifications valid over this range. Accuracy (Reference Includes In Analog Mode: ±0.15% of calirated span upper range value (URV), whichever is comined effects of linearity, greater, terminal ased. hysteresis, and repeataility) F URV elow reference point (300 psi), accuracy equals: Accuracy includes residual err after averaging successive 300 psi ar readings in % of span span psi span ar F FOUNDATION TM Fieldus use In Digital Mode: ±0.125% of calirated span upper range value (URV), whichever is Digital Mode specifications. greater, terminal ased. F HART use Analog Mode F URV elow reference point (300 psi), accuracy equals: specifications. 300 psi ar in % of span span psi span ar Zero Temperature Effect per In Analog Mode: ±0.1125% of span. 28C (50F) F URV elow reference point (500 psi), effect equals: 500 psi ar in % of span span psi span ar In Digital Mode: ±0.10% of span. F URV elow reference point (500 psi), effect equals: 500 psi 35 ar in % of span span psi span ar Comined Zero and Span In Analog Mode: ±0.175% of span. Temperature Effect per 28C F URV elow reference point (500 psi), effect equals: (50F) 500 psi ar in % of span span psi span ar In Digital Mode: ±0.15% of span. F URV elow reference point (500 psi), effect equals: 500 psi ar in % of span span psi span ar Zero Static Pressure Effect per ±0.075% of span. 1,000 psi (70 ar) F URV elow reference point (500 psi), effect equals: 500 psi ar in % of span span psi span ar Comined Zero and Span Static ±0.15% of span. Pressure Effect per 1,000 psi (70 F URV elow reference point (500 psi), effect equals: ar) 500 psi ar in % of span span psi span ar Staility ±0.03% of URL per year. * Perfmance specifications are ased on reference conditions of 25C (77F), zero (0) static pressure, 10 to 55% RH, and 316 Stainless Steel arrier diaphragm.

9 ST 3000 Smart Pressure Transmitter 9 Perfmance Under Rated Conditions All Models Parameter Description Output (two-wire) Analog : 4 to 20 ma (Nmal signal range is 3.8 ma and 20.8 ma. Transmitter failure values are: is 3.6 ma and 20.9 ma Digital communications : Honeywell DE mode, FOUNDATION TM Fieldus HART protocol (selectale versions 5.x 6.x availale). Supply Voltage Effect Damping Time Constant NAMUR NE 43 Compliance (Option NE ) SIL 2/3 Compliance (Option SL ) Lightning Protection Option (Option LP ) 0.005% span per volt. Adjustale from 0 to 32 seconds digital damping. Transmitter failure infmation is generated when the measuring infmation is invalid no longer present. Failure infmation is transmitted as a current signal ut outside the nmal 4-20 ma measurement signal level. Transmitter failure values are: 3.6 ma and 21.0 ma. The nmal signal range is 3.8 ma and 20.5 ma. SIL certified to IEC f non-redundant use in SIL 2 related Safety Systems (single use) and f redundant (multiple) use in SIL 3 Safety Systems through TÜV Nd Sys Tec GmH & Co. KG under the following standards: IEC : 1998; IEC : 2000; IEC : Leakage Current: 10 microamps 42.4 VDC, 93 C Impulse Rating: 10/20 µ sec. 5,000 Amps (50 strikes) 10,000 Amps (20 strikes) (rise/decay) 10/1,000 µ sec. 250 Amps (1,000 strikes) 500 Amps (400 strikes) Physical and Approval Bodies Parameter Barrier Diaphragms Material STD125, STD110 STD120, STD130, STD170 Process Head Material STD125, STD110 STD120, STD130, STD170 Description 316L SS, Gold-plated 316L SS 316L SS, Hastelloy C-276 2, Monel 400 3, Tantalum, Gold-plated 316L SS, Gold-plated Hastelloy C-276, Gold-plated Monel SS 4, Caron Steel (Zinc-plated) SS 4, Caron Steel (Zinc-plated) 5, Hastelloy C-276 6, Monel Vent/Drain Valves & Plugs SS 4, Hastelloy C-276 2, Monel Head Gaskets Meter Body Bolting Optional Adapter Flange and Bolts Mounting Bracket Fill Fluid Electronic Housing Mounting Process Connections Wiring Dimensions See Figure 4. Glass-filled PTFE standard. Viton and graphite are optional. See MSG. Caron Steel (Zinc plated) standard. Options include 316 SS, NACE A286 SS olts and 304 SS nuts and B7M. Adapter Flange materials include 316 SS, Hastelloy C-276 and Monel 400. Bolt material f flanges is dependent on process head olts material chosen. Standard adapt o-ring material is glass-filled PTFE. Viton and graphite are optional. Caron Steel (Zinc-plated) Stainless Steel racket Caron Steel flat racket availale (standard options). Silicone DC 200 oil CTFE (Chlotrifluoethylene). Note that Model STD110 is only availale with silicone fill fluid. Epoxy-Polyester hyrid paint. Low Copper-Aluminum. Meets NEMA 4X (watertight) and NEMA 7 (explosion proof). All stainless steel housing is optional. Can e mounted in virtually any position using the standard mounting racket. Bracket is designed to mount on 2-inch (50 mm) vertical hizontal pipe. See Figure 3. 1/4-inch NPT; 1/2-inch NPT with adapter (standard option, meets DIN requirements) Accepts up to 16 AWG (1.5 mm diameter). Net Weight 9.0 pounds (4.1 Kg). 1 Vent/Drains are sealed with Teflon PTFE 2 Hastelloy C-276 UNS N Monel 400 UNS N Supplied as 316 SS as Grade CF8M, the casting equivalent of 316 SS. 5 Caron Steel heads are zinc-plated and not recommended f water service due to hydrogen migration. F that service, use 316 stainless steel wetted Process Heads. 6 Hastelloy C-276 UNS N Supplied as indicated as Grade CW12MW, the casting equivalent of Hastelloy C Monel 400 UNS N Supplied as indicated as Grade M30C, the casting equivalent of Monel Monel 400 UNS N04400 UNS N04405

10 10 ST 3000 Smart Pressure Transmitter Certifications FM Approvals SM Type of Protection Comm. Option Field Parameters Temp. Codes Explosionproof: Class I, Division 1, Groups A, B, C, D locations Dust Ignition Proof: Class II, III, Division 1, Groups E, F, G locations, Enclosure Type 4X Intrinsically Safe: Class I, II, III, Division 1, Groups A, B, C, D, E, F, G locations, Enclosure Type 4X Intrinsically Safe: Class I, II, III, Division 1, Groups A, B, C, D, E, F, G locations; Class 1, Zone 0, AEx ia Group IIC, Enclosure Type 4X / IP 66/67 Nonincendive: Class I, Division 2, Groups A, B, C, D locations, Enclosure Type 4X Nonincendive: Class I, Division 2, Groups A, B, C, D; Suitale f: Class II, Division 2, Groups F&G; Class III, Division 2; Class I, Zone 2, Group IIC, Enclosure Type 4X / IP 66/67 * except Li = 150µH when Option ME, Analog Meter, is selected. FM Approvals SM is a service mark of FM Gloal All All T5 Ta = 93ºC 4-20 ma / DE 4-20 ma / Fieldus Entity (Not FISCO) Fieldus Entity (Not FISCO) FISCO 4-20 ma / DE 4-20 ma / HART Fieldus Entity (Not FNICO) Fieldus Entity (Not FNICO) FNICO Vmax = 42.4V Imax = 225mA Vmax = 30V Imax = 225mA Vmax = 32V Imax = 120mA Pi =0.84W Vmax = 24V Imax = 250mA Vmax = 17.5V Imax = 380mA Pi =5.32W Vmax = 42.4V Imax = 225mA Vmax = 30V Imax = 225mA Vmax = 32V Imax = 120mA Pi =0.84W Vmax = 24V Imax = 250mA Vmax = 32V T4 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC

11 ST 3000 Smart Pressure Transmitter 11 Type of Protection Comm. Option Field Parameters Temp. Codes Canadian Standards Association (CSA) Explosion Proof: Class I, Division 1, Groups B, C, D locations Dust Ignition Proof: Class II, III, Division 1, Groups E, F, G locations, Enclosure Type 4X Intrinsically Safe: Class I, II, III, Division 1, Groups A, B, C, D, E, F, G locations, Enclosure Type 4X Nonincendive: Class I, Division 2, Groups A, B, C, D locations, Enclosure Type 4X Canadian Registration Numer (CRN): All All T4 Ta = 93ºC 4-20 ma / DE 4-20 ma / HART Fieldus Entity (Not FISCO) 4-20 ma / DE 4-20 ma / HART Fieldus Entity (Not FNICO) Vmax = 42V Imax = 225mA Vmax = 42V Imax = 225mA Vmax = 24V Imax = 250mA Vmax = 42.4V Imax = 225mA Vmax = 30V Imax = 225mA Vmax = 24V Imax = 250mA T4 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC All ST 3000 models except STG19L, STG99L, STG170 and STG180 have een registered in all provinces and territies in Canada and are marked CRN: 0F8914.5C.

12 12 ST 3000 Smart Pressure Transmitter Type of Protection Comm. Option Field Parameters Temp. Codes IECEx International Electrotechnical Commission (LCIE) Flameproof, Zone 1: Ex d IIC, Enclosure IP 66/67 Intrinsically Safe, Zone 0/1: Ex ia IIC, Enclosure IP 66/67 * except Li = 150µH when Option ME, Analog Meter, is selected. All 4-20 ma / DE 4-20 ma / HART Fieldus (Not FISCO) All Ui = 24V Ii = 250mA T5 Ta = 50 to 93ºC T6 Ta = 50 to 78ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC SAEx (South Africa) Type of Protection Comm. Option Field Parameters Temp. Codes Flameproof, Zone 1: Ex d IIC, Enclosure IP 66/67 Intrinsically Safe, Zone 0/1: Ex ia IIC, Enclosure IP 66/67 Multiple Marking: Flameproof, Zone 1: Ex d IIC, Enclosure IP 66/67 Intrinsically Safe, Zone 0/1: Ex ia IIC, Enclosure IP 66/67 The user must determine the type of protection required f installation of the equipment. The user shall then check the ox [ ] adjacent to the type of protection used on the equipment certification nameplate. Once a type of protection has een checked on the nameplate, susequently the equipment shall not e reinstalled using any of the other certification types. * except Li = 150µH when Option ME, Analog Meter, is selected. All 4-20 ma / DE 4-20 ma / HART Fieldus (Not FISCO) 4-20 ma / DE 4-20 ma / HART Fieldus (Not FISCO) All Ui = 24V Ii = 250mA Ui = 24V Ii = 250mA T5 Ta = 50 to 93ºC T6 Ta = 50 to 78ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC

13 ST 3000 Smart Pressure Transmitter 13 Type of Protection Comm. Option Field Parameters Temp. Codes Flameproof, Zone 0:, Ex td Enclosure IP 66/67 All All A20 IP6X T95ºC Ta = 93ºC T80ºC Ta = 78ºC Flameproof, Zone 1:, Ex d IIC, Ex td Enclosure IP 66/67 All All T5 Ta = 50 to +93ºC T6 Ta = 50 to +78ºC, A21 IP6X T95ºC Ta = 93ºC T80ºC Ta = 78ºC Intrinsically Safe, Zone 0/1:, Ex ia IIC, Enclosure IP 66/ ma / DE 4-20 ma / HART Ui = 24V Ii = 250mA Ui = 24V Ii = 250mA T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC Fieldus (Not FISCO) T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC 4-20 ma / DE T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC ATEX (LCIE) Non-Sparking, Zone 2:,Ex na IIC (Honeywell), Enclosure IP 66/ ma / HART T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC Fieldus (Not FNICO) T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC Multiple Marking: Flameproof, Zone 1:, Ex d IIC 4-20 ma / DE T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC Intrinsically Safe, Zone 0/1:, Ex ia IIC Non-Sparking, Zone 2:, Ex na IIC 4-20 ma / HART T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC NOTE: The user must determine the type of protection required f installation of the equipment. The user shall then check the ox [ ] adjacent to the type of protection used on the equipment certification nameplate. Once a type of protection has een checked on the nameplate, susequently the equipment shall not e reinstalled using any of the other certification types. * except Li = 150µH when Option ME, Analog Meter, is selected. Fieldus (Not FISCO/FNICO) Ui = 24V Ii = 250mA T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC

14 14 ST 3000 Smart Pressure Transmitter INMETRO (CERTUSP) Brazil Type of Protection Comm. Option Field Parameters Temp. Codes Flameproof, Zone 1: BR-Ex d IIC Enclosure IP 66/67 All All T5 Ta = 50 to 93ºC T6 Ta = 50 to 78ºC Intrinsically Safe, Zone 0/1: BR-Ex ia IIC Enclosure IP 66/67 * except Li = 150µH when Option ME, Analog Meter, is selected ma / DE 4-20 ma / HART Fieldus (Not FISCO) Ui = 24V Ii = 250mA T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC This certificate defines the certifications covered f the ST 3000 Pressure Transmitter family of products, including the SMV 3000 Smart Multivariale Transmitter. It represents the compilation of the five certificates Honeywell currently has covering the certification of these products into marine applications. F ST 3000 Smart Pressure Transmitter and SMV 3000 Smart Multivarile Transmitter ST 3000 Pressure Transmitter Marine Certificate (MT Option) American Bureau of Shipping (ABS) Steel Vessel Rules 1-1-4/3.7, 4-6-2/5.15, 4-8-3/13 & 13.5, 4-8-4/27.5.1, 4-9-7/13. Certificate numer: 04-HS PDA Bureau Veritas (BV) - Product Code: 389:1H. Certificate numer: 12660/B0 BV Det Nske Veritas (DNV) - Location Classes: Temperature D, Humidity B, Viration A, EMC B, Enclosure C. F salt spray exposure; enclosure of 316 SST 2-part epoxy protection with 316 SST olts to e applied. Certificate numer: A Kean Register of Shipping (KR) - Certificate numer: LOX17743-AE001 Lloyd's Register (LR) - Certificate numer: 02/60001(E1) & (E2)

15 ST 3000 Smart Pressure Transmitter 15 The ST 3000 Smart Pressure Transmitters are in confmity with the essential requirements of the Pressure Equipment Directive. European Pressure Equipment Directive (PED) (97/23/EC) Honeywell ST 3000 Smart Pressure Transmitters are designed and manufactured in accdance with the applicale ptions of Annex I, Essential Safety Requirements, and sound engineering practices. These transmitters have no pressurized internal volume, have a pressurized internal volume rated less than 200 ar (2,900 psig), and/ have a maximum volume of less than 0.1 liter (Article 3, 1.1.(a) first indent, Group 1 fluids). Therefe, these transmitters are not suject to the essential requirements of the directive 97/23/EC (PED, Annex I) and shall not have the CE mark applied. F transmitters rated > 200 ar (2,900 psig) < 1,000 ar (14,500 psig) Honeywell maintains a technical file in accdance with Annex III, Module A, (internal production control) when the CE mark is required. Transmitter Attachments: Diaphragm Seals, Process Flanges and Manifolds comply with Sound Engineering Practice. NOTE: Pressure transmitters that are part of safety equipment f the protection of piping (systems) vessel(s) from exceeding allowale pressure limits, (equipment with safety functions in accdance with Pressure Equipment Directive 97/23/EC article 1, 2.1.3), require separate examination. A fmal statement from TÜV Industry Service Group of TÜV America, Inc., a division of TÜV Süddeutschland, a Notified Body regarding the Pressure Equipment Directive, can e found at A hard copy may e otained y contacting a Honeywell representative. CE Mark Electro Magnetic Compatiility (EMC) (2004/108/EC) All Models: EN : 1992; EN :1995; EN : A1, A2, and A3 Industrial Locations Dual Seal Certification Recommended Frequency of Caliration Approved Manufacturing Locations Dual Seal Certification ased on ANSI/NFPA and ANSI/ISA requirements without the use of additional seal protection elements. Honeywell recommends verifying the caliration of these devices once every four years. Honeywell Process Solutions - Yk, PA USA Honeywell (Tianjin) Limited Tianjin, P.R. China Honeywell Automation India Ltd. Pune India Foundation TM Fieldus is a trademark of the Fieldus Foundation. Viton is a registered trademark of DuPont HART is a registered trademark of HART Communications Foundation. Teflon is a registered trademark of DuPont. Hastelloy C-276 is a registered trademark of Haynes International. DC 200 is a registered trademark of Dow Cning. Monel 400 is a registered trademark of Special Metals Cpation. FM Approvals SM is a service mark of FM Gloal ST 3000 and Experion are registered trademarks of Honeywell International Inc.

16 16 ST 3000 Smart Pressure Transmitter Mounting Figure 3 Examples of typical mounting positions Reference Dimensions: millimeters inches Figure 4 Typical mounting dimensions of STD110, STD120, STD125, STD130 & STD170 f reference

17 ST 3000 Smart Pressure Transmitter 17 Options High Accuracy (Option HA) Extends applicale S100 models to ±0.025% analog reference accuracy. Mounting Bracket (Options MB, MX, SB, SX, FB) The mounting racket is availale in either zinc-plated caron steel stainless steel and is suitale f hizontal vertical mounting on a two inch (50 millimeter) pipe, as well as wall mounting. An optional flat mounting racket is also availale in caron steel f two inch (50 millimeter) pipe mounting. An option also exists f Marine approved mounting rackets used with Marine certification options. Indicating Meter (Options ME and SM) Two integral meter options are availale. An analog meter (option ME) is availale with a dual 0 to 10 square root and 0 to 100% linear scale. The Smart Meter (option SM) provides an LCD display f oth analog and digital output and can e configured to display pressure in selected engineering units. HART Output Protocol (Options HC and H6) Optional electronic modules f the ST 3000 provide HART Protocol compatiility in either HART 5.x 6.x fmats. Transmitters with a HART Option are compatile with any HART enaled system that provides 5.x 6.x fmat suppt. Digital Enhanced Output (Option DE) A communications protocol used together with TDC and Experion system solutions to provide a higher level and me secure data interface etween instruments and the control system. Lightning Protection (Option LP) A terminal lock is availale with circuitry that protects the transmitter from transient surges induced y neary lightning strikes. NAMUR NE43 Compliance (Option NE) This option provides software the meets the NAMUR NE43 requirements f failsafe software. Transmitter failure infmation is generated when the measuring infmation is no longer valid. Transmitter failure values are 3.6 ma and 21.0 ma. The nmal ST 3000 ranges are 3.8 ma and 20.8 ma. Write Protection (Options WP and WX) Provides the capaility to hardwire write-protect installed transmitter configurations. Stainless Steel Tagging (Option TG) Up to 30 characters can e added on the stainless steel nameplate mounted on the transmitter s electronics housing at no extra cost. A stainless steel wired on tag with additional data of up to 4 lines of 28 characters is also availale. The numer of characters f tagging includes spaces. Transmitter Configuration (Options TC and FC) With Option TC, the facty can configure the analog, DE HART transmitter s linear/square root extraction, damping time, LRV, URV and mode (analog/digital) and enter an ID tag of up to eight characters and scratchpad infmation as specified. With Option FC, the Device ID, Transmitter Tag, Unit Level Node Address, Output Mode and Damping Time Constants can e specified. Foundation TM Fieldus Output (Option FF) Equips transmitter with FF protocol f use in kit/s FF netwks. See document 34-ST f additional infmation on ST 3000 Fieldus transmitters. Custom Caliration and ID in Memy (Option CC) The facty can calirate any range within the scope of the transmitter s range and enter an ID tag of up to eight characters in the transmitter s memy. SIL2/SIL3 Certification (Option SL) This ST 3000 product is availale f use with safety Indicat Configuration (Option CI) Provides custom configuration of Smart Meters systems. With the SL option, we are fully certified to SIL 2 capaility f single transmitters and SIL 3 capaility f multiple transmitter use through TÜV Nd Sys Tec GmH & Co. KG. We are in compliance with the following SIL standards: Lifetime Warranty (Option WL) Extends limited 1-year warranty policy to 15 years f ST 3000 S100 pressure transmitters. See Honeywell Terms and Conditions. IEC : 1998; IEC : 2000; IEC : 1998

18 18 ST 3000 Smart Pressure Transmitter Ordering infmation F application assistance, current specifications, pricing, name of the nearest Authized Distriut, contact one of the offices elow. Or, visit Honeywell on the Wld Wide We at: ASIA PACIFIC Control Products Asia Pacific Headquarters Phone: +(65) Fax: +(65) Asia Pacific Gloal Technical Suppt Field Instruments Phone: Fax: Process Instruments Phone: (603) Fax: (603) Australia Honeywell Limited Phone: +(61) FAX: +(61) Toll Free Toll Free Fax: China PRC - Beijing Honeywell China Inc. Phone: +(86-10) Fax: +(86-10) China PRC - Shanghai Honeywell China Inc. Phone: (86-21) Fax: (86-21) China PRC - Chengdu Honeywell China Inc. Phone: +(86-28) Fax: +(86-28) China PRC - Xi an Honeywell China Ltd - Xi an. Phone: +(86-29) Fax: +(86-29) China PRC - Shenzhen- Honeywell China Inc. Phone: +(86) Fax: +(86) Indonesia PT Honeywell Indonesia Phone: +(62) FAX: +(62) India Automation India Ltd. Honeywell Ltd. Phone:+(91) Fax: +(91) Japan Honeywell Inc. Phone: +(81) Fax: +(81) Malaysia Honeywell Engineering Sdn Bhd Phone: +(60-3) Fax: +(60-3) New Zealand Honeywell Limited Phone: +(64-9) Fax: +(64-9) Toll Free (0800) Philippines Honeywell Systems (Philippines) Inc. Phone: +(63-2) / Fax: +(63-2) Singape Honeywell Pte Ltd. Phone: +(65) Fax: +(65) South Kea Honeywell Kea Co Ltd Phone: +(822) Fax: +(822) Thailand Honeywell Systems (Thailand) Ltd. Phone: +(662) FAX: +(662) Taiwan R.O.C. Honeywell Taiwan Ltd. Phone: +(886-2) FAX: +(886-2) SE Asia Countries see Honeywell Pte Ltd (Singape) f: Pakistan Camodia Guam Laos Myanmar Vietnam East Tim SE Asia Countries see Honeywell Automation India Ltd f: Bangladesh Nepal Sri Lanka EUROPE Austria Honeywell Austria GmH Phone: +43 (316) FAX: +43 (316)40017 Belgium Honeywell SA/NV Phone: +32 (0) FAX: +32 (0) Bulgaria Honeywell EOOD Phone: +(359) FAX: +(359) Czech Repulic Honeywell spol. s.r.o. Phone: FAX: Denmark Honeywell A/S Phone: +(45) FAX: +(45) Finland Honeywell OY Phone: +358 (0) FAX: +358 (0) France Honeywell SA Phone: +33 (0) FAX: +33 (0) Germany Honeywell AG Phone: +49 (69) FAX: +49 (69) Hungary Honeywell Kft. Phone: FAX: Italy Honeywell S.p.A. Phone: / 395 FAX: The Netherlands Honeywell B.V. Phone: +31 (0) FAX: +31 (0) Nway Honeywell A/S Phone: (45) Poland Honeywell Sp. zo.o Phone: FAX: Ptugal Honeywell Ptugal Lda Phone: FAX: Romania Honeywell Bucharest Phone: +40 (0) FAX: +40 (0) Russian Federation (RF), ZAO "Honeywell" Phone: +7 (095) FAX: +7 (495) Slovak Repulic Honeywell s.r.o. Phone: FAX: Spain Honeywell S.A. Phone: +34 (0) FAX: +34 (0) Sweden Honeywell AB Phone: +(46) FAX: +(46) Switzerland Honeywell AG Phone: FAX: +(41) Turkey Honeywell Turkey A.S. Phone: FAX: Ukraine Honeywell Tel: Fax: United Kingdom Honeywell Control Systems Ltd. Phone: +44 (0) FAX: +44 (0) MIDDLE EAST Au Dhai U A E Middle East Headquarters Honeywell Middle East Ltd. Phone: FAX: Sultanate of Oman Honeywell & Co Oman LLC Phone: / Ext.33 FAX Saudia Araia Honeywell Turki Araia Ltd Juail Office Phone: Fax: Honeywell - ATCO Dammam Office Phone: Fax: Kuwait Honeywell Kuwait KSC Phone: to 30 Fax: and Phone: /1821 Fax: AFRICA Mediterranean & African Distriuts Honeywell SpA Phone: +39 (02) FAX: +39 (02) South Africa (Repulic of) and su saharan Honeywell Southern Africa Honeywell S.A. Pty. Ltd. Phone: FAX NORTH AMERICA Canada Honeywell LTD Phone: FAX: USA Honeywell Process Solutions, Phone: Or askssc@honeywell.com SOUTH AMERICA Argentina Honeywell S.A.I.C. Phone: +(54-11) FAX: +(54-11) Brazil Honeywell do Brasil & Cia Phone: +(55-11) FAX: +(55-11) Chile Honeywell Chile, S.A. Phone: +(56-2) FAX: +(56-2) Mexico Honeywell S.A. de C.V. Phone: +(52) FAX: +(52) Puerto Rico Honeywell Inc. Phone: +(809) FAX: +(809) Trinidad Honeywell Inc. Phone: +(868) FAX: +(868) Venezuela Honeywell CA Phone: +(58-2) FAX: +(58-2) Specifications are suject to change without notice.

19 ST 3000 Smart Pressure Transmitter 19 Model Selection Guides are suject to change and are inserted into the specifications as guidance only. Pri to specifying dering a model check f the latest revision Model Selection Guides which are pulished at: Model Selection Guide ST 3000 Smart Transmitter Differential Pressure (DP) Series ST-16U-01 Issue 62 Page 1 of 5 Model Selection Guide Instructions Select the desired Key Numer. The arrow to the right marks the selection availale. Make one selection from each Tale I and II using the column elow the proper arrow. Select as many Tale III options as desired (if no options approvals are desired, specify 9X). A ( ) denotes unrestricted availaility. A letter denotes restricted availaility. Restrictions follow Tale IV. Key Numer I II III (Optional) - _ - _ -, + IV XXXX KEY NUMBER Span 0-1" to 0-400" H 2 O/0-2.5 to 0-1,000 mar Body Rating: 4,500 psi (315 ar) 0-5 to psi/ to 0-7 ar Body Rating: 4,500 psi (315 ar) to 0-3,000 psi/0-7 to ar Body Rating: 4,500 psi (315 ar) 0-25" to 0-600" H 2 O/ to 0-1,500 mar Body Rating: 4500 psi (315 ar) 0-0.4" to 0-10" H 2 O/0-1 to 0-25 mar Body Rating: 50 psi (3.5 ar) Compound Characterized Selection STD120 STD130 STD170 STD125 STD110 Availaility Imptant Note: Base STD models no longer include a default communications option. All units now require the selection of a communication option from Tale III (AN, DE, HC, H6 FF). TABLE I - METER BODY Vent/Drain Valves and Process Wetted Heads Plugs 2 Barrier Diaphragms Caron Steel SS 316L SS Caron Steel SS Hastelloy C Caron Steel SS Monel Caron Steel SS Tantalum 316 SS SS 316L SS Materials of 316 SS SS Hastelloy C Construction 316 SS SS Monel SS SS Tantalum Hastelloy C-276 3, 6 Hastelloy C Hastelloy C Hastelloy C-276 3, 6 Hastelloy C Tantalum Monel 400 4, 7 Monel Monel Fill Fluid DC 200 Silicone CTFE Process Head ¼" NPT Configuration ½" NPT with Adapter (on ¼" NPT Head) Selection A B C D E F G H J K L _ 1 _ _ 2 _ A H t t t t t 1 Caron Steel heads are zinc-plated and not recommended f water service due to hydrogen migration. Use 316 wetted process heads instead. 2 Vent/Drains & Plugs are sealed with Teflon PTFE 3 Hastelloy C-276 UNS N Monel 400 UNS N Supplied as 316 SS as Grade CF8M, the casting equivalent of 316 SS. 6 Supplied as indicated as Grade CW12MW, the casting equivalent of Hastelloy C Supplied as indicated as Grade M30C, the casting equivalent of Monel Monel 400 UNS N04400 UNS N04405

20 20 ST 3000 Smart Pressure Transmitter 34-ST-16U-01 Issue 62 Page 2 of 5 STD1xx Availaility TABLE II Selection No Selection TABLE III - OPTIONS Communication Options (Must choose a communications option) Analog only (can e configured using appropriate Honeywell DE tool) DE Protocol communications HART 5.x Protocol compatile electronics HART 6.x Protocol compatile electronics FOUNDATION TM Fieldus Communications Indicating Meter Options Analog Meter (0-100 Even 0-10 Square Root) Smart Meter Custom Configuration of Smart Meter Local Zero & Span Local Zero Transmitter Housing & Electronics Options NAMUR Failsafe Software SIL 2 - TÜV Certified transmitter (requires HC H6 and WP options) Lightning Protection Custom Caliration and I.D. in Memy Transmitter Configuration - (non-fieldus) Transmitter Configuration - (Fieldus) Write Protection (Delivered in the "enaled" position) Write Protection (Delivered in the "disaled" position) 316 SS 5 Electronics Housing - with M20 Conduit Connections 1/2" NPT to M SS Conduit Adapter (BASEEFA EEx d IIC) 1/2" NPT to 3/4" NPT 316 SS Conduit Adapter 316 SS 5 Housing with M20 to 1/2" NPT 316 SS Conduit Adapter (use f FM and CSA Approvals) Steel Customer Wired-On Tag (4 lines, 28 characters per line, customer supplied infmation) Stainless Steel Customer Wired-On Tag (lank) High Accuracy Low Temperature C Amient Limit End Cap Live Circuit Warning Lael in Spanish (only with ATEX 3D) End Cap Live Circuit Warning Lael in Ptuguese (only with ATEX 3D) End Cap Live Circuit Warning Lael in Italian (only with ATEX 3D) End Cap Live Circuit Warning Lael in German (only with ATEX 3D) Meter Body Options 316 SS Bolts and 316 SS Nuts f Process Heads B7M Bolts and Nuts f Process Heads NACE A286 SS Bolts and 304 SS Nuts f Process Heads 316 SS 5 Adapter Flange - 1/2" NPT with CS Bolts 316 SS 5 Adapter Flange - 1/2" NPT with 316 SS Bolts 316 SS 5 Adapter Flange - 1/2" NPT with NACE A286 SS Bolts 316 SS 5 Adapter Flange - 1/2" NPT with B7M Bolts Hastelloy C-276 3, 6 Adapter Flange - 1/2" NPT with CS Bolts Hastelloy C-276 3, 6 Adapter Flange - 1/2" NPT with 316 SS Bolts Monel 400 4, 7 Adapter Flange - 1/2" NPT with CS Bolts Monel 400 4, 7 Adapter Flange - 1/2" NPT with 316 SS Bolts 316 SS 5 Blind Adapter Flange with CS Bolts 316 SS 5 Blind Adapter Flange with 316 SS Bolts 316 SS 5 Blind Adapter Flange with NACE A286 SS Bolts 316 SS 5 Blind Adapter Flange with B7M Bolts Side Vent/Drain (End Vent Drain is standard) 316 SS Center Vent Drain and Bushing Viton 8 Process Head Gaskets (adapter gaskets dered separately) Graphite Process Head & Adapt Flange Gaskets Viton 8 Adapter Flange Gaskets Diaphragm Options Gold plated diaphragm(s) on 316 SS Gold plated diaphragm(s) on Monel Hastelloy C ONLY Selection AN DE HC H6 FF r r r r r ME SM CI e e e e e ZS m m m m LZ x x x x NE SL p p p p p LP CC TC FC WP WX SH n n n n n A1 n n n n n A2 A3 i i i TG TB HA LT d SP a a a a a PG a a a a a TL a a a a a GE a a a a a SS B7 CR S2 c c c c c S3 c c c c c S4 c c c c c S5 c c c c c T2 c c c T3 c c c V2 c c c V3 c c c B3 B4 B5 B6 SV CV VT GF VF G1 G2 i i 3 Hastelloy C-276 UNS N Monel 400 UNS N Supplied as 316 SS as Grade CF8M, the casting equivalent of 316 SS. 6 Supplied as indicated as Grade CW12MW, the casting equivalent of Hastelloy C Supplied as indicated as Grade M30C, the casting equivalent of Monel Viton Fluocaron Elastomer

21 ST 3000 Smart Pressure Transmitter ST-16U-01 Issue 62 Page 3 of 5 STD1xx Availaility TABLE III - OPTIONS (continued) Transmitter Mounting Bracket Options Selection Angle Mounting Bracket - Caron Steel MB Marine Approved Angle Mounting Bracket - Caron Steel MX Angle Mounting Bracket SS SB Marine Approved Angle Mounting Bracket SS SX Flat Mounting Bracket - Caron Steel FB Services/Certificates/Marine Type Approval Options User's Manual Paper Copy (Standard, HC/H6, FF ships accdingly) UM Clean Transmitter f Oxygen Chline Service with Certificate 0X j j j j Over-Pressure Leak Test with F3392 Certificate TP Caliration Test Rept and Certificate of Confmance (F3399) F1 Certificate of Confmance (F3391) F3 Certificate of Origin (F0195) F5 FMEDA Certificate (SIL 1) (FC33321) F6 SIL Certificate (SIL 2/3) (FC33337) FE NACE Certificate (Process-Wetted & Non-Process Wetted) (FC33339) F7 o o o o o NACE Certificate (Process-Wetted only) (FC33338) FG Material Traceaility Certification per EN (FC33341) FX Marine Type Approvals (DNV, ABS, BV, KR & LR) (FC33340) MT Warranty Options Additional Warranty - 1 year W1 Additional Warranty - 2 years W2 Additional Warranty - 3 years W3 Additional Warranty - 4 years W4 Lifetime Warranty - 15 years WL Approval Approval Type Body No hazardous location approvals Explosion Proof Dust Ignition Proof FM Non-Incendive Approvals SM Intrinsically Safe Canadian Standards Association (CSA) IECEx SAEx (South Africa) CERTUSP INMETRO (Brazil) Explosion Proof Dust Ignition Proof Location Classification Class I, Div. 1, Groups A,B,C,D Class II, III Div. 1, Groups E,F,G Class I, Div. 2, Groups A,B,C,D Class I, II, III, Div. 1, Groups A,B,C,D,E,F,G Class I, Div. 1, Groups B,C,D Class II, III, Div. 1, Groups E,F,G Intrinsically Safe Class I, II, III, Div. 1, Groups A,B,C,D,E,F,G Flameproof, Ex d IIC; T5 (Ta = -40 to +93 C), Zone 1 T6 (Ta = -40 to +78 C) Intrinsically Safe, Ex ia IIC; T3, T4, T5, T6 See Spec f detailed Zone 0/1 temperature codes y Communications option. Intrinsically Safe, Zone 0/1 Ex ia IIC T4, T5, T6 Flameproof, Zone 1 Ex d IIC T5, T6 Enclosure IP 66/67 Multiple Marking 11 Intr. Safe, Zone 0/1, Ex ia IIC T4, T5, T6 Flameproof, Zone 1 Ex d IIC T5, T6 Enclosure IP 66/67 Flameproof, Zone 1 BR- Ex d IIC; T5, T6 Intrinsically Safe, BR- Ex ia IIC; T4, T5, T6 (See CERTUSP certificate f Zone 0/1 detailed temperature codes y Communications option) Selection 9X 1C 2J CA Z2 ZD ZA 6D 6S f Approvals continued on next page