ST 3000 Smart Transmitter 3-A Sanitary Remote Seal Models Specification 34-ST August 2011

Transcription

1 ST 3000 Smart Transmitter 3-A Sanitary Remote Seal Models Specification 34-ST August 2011 Function Honeywell s ST 3000 Transmitters with Remote Seals are availale in 3-A Sanitary models for use in applications involving sanitary service. The transmitter s electronics housing is availale in Stainless Steel or Aluminum with aked vinyl enamel finish. Standard fill fluids are DC 200 Silicone Oil and CTFE (Chlorotrifluoroethylene). Neoee TM M20 fill fluid is optional. Models STR12D 0 to 400 inh 2 O 0 to 1,000 mar STR13D 0 to 100 psid 0 to 7 ard STR14A 0 to 500 psia 0 to 35 ara STR14G 0 to 500 psig 0 to 35 arg STR17G 0 to 600 psig 0 to 41 arg STR93D 0 to 100 psid 0 to 7 ard STR94G 0 to 500 psig 0 to 35 arg Advanced Diagnostics ST 3000 is now availale for oth HART 6 and Foundation TM Fieldus with advanced diagnostics that minimize unplanned plant outages, minimize maintenance costs and y providing the industry s most reliale transmitter. Provide advanced warning of possile failure events and avoid costly shutdowns. Sanitary Seal Model STR12D STR13D STR14A STR14G STR17G STR93D STR94G Reference Specification Numer 34-ST ST ST ST ST ST ST Three levels of failure reporting Comprehensive list of on-oard diagnostics (Ref. ST 3000 User manual with HART 6, 34-ST Rev: June 09 and Foundation TM Fieldus option manual 34-ST Rev: June 09)

2 2 ST 3000 Smart Pressure Transmitter Mounting 3-A Sanitary Remote Seal Models with Gauge, Asolute, or Differential (Figure 1) Pressure Transmitters Models STR12D, STR13D, STR14A, STR14G, STR17G, STR93D, and STR94G These models are designed to mount to a process with a sanitary clamp. The Tri-Clover Tri-Clamp Sanitary Seal (Figure 2) is availale in 2-, 2-1/2-, 3-, and 4-inch sizes. Optional Cherry-Burrell I Line, APC Clamp, and Bevel Seat Sanitary Seals may e availale. Check the reference specifications for capillary length restrictions and typical transmitter and seal dimensions. The Sanitary Seal is 316 Stainless Steel. CAUTION: The Maximum Allowale Working Pressure (MAWP) for pressure transmitters with sanitary clamp connections is the MAWP of the transmitter or the MAWP of the sanitary seal (if selected) or the MAWP of the sanitary clamp, which ever is lowest Figure 1 STRXXG Gauge Pressure Transmitter with sanitary quick connect remote seal Figure 2 Differential Pressure Transmitter with Sanitary Quick-Connect Remote Seals.

3 ST 3000 Smart Pressure Transmitter 3 Reference Dimensions Instrument Connection Body (Wetted) B (Wetted) A Reference Dimensions Seal Size Inches (Millimeters) 2 (50) Diameter Inches (Millimeters) 1.9 (48) Dimension - Inches (Millimeters) A 2.5 (63) B 1.2 (30) 2.5 (63) 2.4 (61) 3.0 (76) 1.2 (30) 3 (76) 2.9 (73) 3.6 (91) 1.2 (30) 4 (101) 4.1 (104) 4.7 (119) 1.0 (25) Figure 3 Typical Tri-Clover Tri-Clamp TM Seal design and reference dimensions. Note: Sanitary remote seals used on Honeywell ST pressure transmitters have separate 3-A authorization from the seal manufacturer

4 4 ST 3000 Smart Pressure Transmitter Certifications Type of Protection Comm. Option Field Parameters Temp. Codes FM Approvals SM Explosionproof: Class I, Division 1, Groups A, B, C, D locations Dust Ignition Proof: Class,, Division 1, Groups E, F, G locations, Enclosure Type 4X Intrinsically Safe: Class I,,, Division 1, Groups A, B, C, D, E, F, G locations, Enclosure Type 4X Intrinsically Safe: Class I,,, Division 1, Groups A, B, C, D, E, F, G locations; Class 1, Zone 0, AEx ia Group C, Enclosure Type 4X / IP 66/67 Nonincendive: Class I, Division 2, Groups A, B, C, D locations, Enclosure Type 4X Nonincendive: Class I, Division 2, Groups A, B, C, D; Suitale for: Class, Division 2, Groups F&G; Class, Division 2; Class I, Zone 2, Group C, Enclosure Type 4X / IP 66/67 Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected. FM Approvals SM is a service mark of FM Gloal All All T5 Ta = 93ºC 4-20 ma / DE 4-20 ma / Fieldus Entity (Not FISCO) Fieldus Entity (Not FISCO) FISCO 4-20 ma / DE 4-20 ma / HART Fieldus Entity (Not FNICO) Fieldus Entity (Not FNICO) FNICO Vmax = 42.4V Imax = 225mA Vmax = 30V Imax = 225mA Vmax = 32V Imax = 120mA Li = 0 Pi =0.84W Vmax = 24V Imax = 250mA Li = 0 Vmax = 17.5V Imax = 380mA Li = 0 Pi =5.32W Vmax = 42.4V Imax = 225mA Vmax = 30V Imax = 225mA Vmax = 32V Imax = 120mA Li = 0 Pi =0.84W Vmax = 24V Imax = 250mA Li = 0 Vmax = 32V Li = 0 T4 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC

5 ST 3000 Smart Pressure Transmitter 5 Type of Protection Comm. Option Field Parameters Temp. Codes Canadian Standards Association (CSA) Explosion Proof: Class I, Division 1, Groups B, C, D locations Dust Ignition Proof: Class,, Division 1, Groups E, F, G locations, Enclosure Type 4X Intrinsically Safe: Class I,,, Division 1, Groups A, B, C, D, E, F, G locations, Enclosure Type 4X Nonincendive: Class I, Division 2, Groups A, B, C, D locations, Enclosure Type 4X Canadian Registration Numer (CRN): All All T4 Ta = 93ºC 4-20 ma / DE 4-20 ma / HART Fieldus Entity (Not FISCO) 4-20 ma / DE 4-20 ma / HART Fieldus Entity (Not FNICO) Vmax = 42V Imax = 225mA Vmax = 42V Imax = 225mA Vmax = 24V Imax = 250mA Li = 0 Vmax = 42.4V Imax = 225mA Vmax = 30V Imax = 225mA Vmax = 24V Imax = 250mA Li = 0 T4 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 93ºC T4 Ta = 40ºC T3 Ta = 93ºC All ST 3000 models except STG19L, STG99L, STG170 and STG180 have een registered in all provinces and territories in Canada and are marked CRN: 0F8914.5C.

6 6 ST 3000 Smart Pressure Transmitter Type of Protection Comm. Option Field Parameters Temp. Codes IECEx International Electrotechnical Commission (LCIE) Flameproof, Zone 1: Ex d C, Enclosure IP 66/67 Intrinsically Safe, Zone 0/1: Ex ia C, Enclosure IP 66/67 * Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected. All 4-20 ma / DE 4-20 ma / HART Fieldus (Not FISCO) All Ui = 30V Ii = 100mA Ui = 30V Ii = 100mA Ui = 24V Ii = 250mA Li = 0 T5 Ta = 50 to 93ºC T6 Ta = 50 to 78ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC SAEx (South Africa) Type of Protection Comm. Option Field Parameters Temp. Codes Flameproof, Zone 1: Ex d C, Enclosure IP 66/67 Intrinsically Safe, Zone 0/1: Ex ia C, Enclosure IP 66/67 Multiple Marking: Flameproof, Zone 1: Ex d C, Enclosure IP 66/67 Intrinsically Safe, Zone 0/1: Ex ia C, Enclosure IP 66/67 The user must determine the type of protection required for installation of the equipment. The user shall then check the ox [ ] adjacent to the type of protection used on the equipment certification nameplate. Once a type of protection has een checked on the nameplate, susequently the equipment shall not e reinstalled using any of the other certification types. * Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected. All 4-20 ma / DE 4-20 ma / HART Fieldus (Not FISCO) 4-20 ma / DE 4-20 ma / HART Fieldus (Not FISCO) All Ui = 30V Ii = 100mA Ui = 30V Ii = 100mA Ui = 24V Ii = 250mA Li = 0 Ui = 30V Ii = 100mA Ui = 30V Ii = 100mA Ui = 24V Ii = 250mA Li = 0 T5 Ta = 50 to 93ºC T6 Ta = 50 to 78ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC

7 ST 3000 Smart Pressure Transmitter 7 Type of Protection Comm. Option Field Parameters Temp. Codes Flameproof, Zone 0:, Ex td Enclosure IP 66/67 All All A20 IP6X T95ºC Ta = 93ºC or T80ºC Ta = 78ºC Flameproof, Zone 1:, Ex d C, Ex td Enclosure IP 66/67 All All T5 Ta = 50 to +93ºC T6 Ta = 50 to +78ºC, A21 IP6X T95ºC Ta = 93ºC or T80ºC Ta = 78ºC Intrinsically Safe, Zone 0/1:, Ex ia C, Enclosure IP 66/ ma / DE 4-20 ma / HART Ui = 30V Ii = 100mA Ui = 30V Ii = 100mA T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC Fieldus (Not FISCO) Ui = 24V Ii = 250mA Li = 0 Ui = 30V Ii = 100mA T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC 4-20 ma / DE T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC ATEX (LCIE) Non-Sparking, Zone 2:,Ex na C (Honeywell), Enclosure IP 66/ ma / HART Ui = 30V Ii = 100mA T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC Fieldus (Not FNICO) Ui = 24V Ii = 250mA Li = 0 T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC Multiple Marking: Flameproof, Zone 1:, Ex d C 4-20 ma / DE Ui = 30V Ii = 100mA T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC Intrinsically Safe, Zone 0/1:, Ex ia C Non-Sparking, Zone 2:, Ex na C 4-20 ma / HART Ui = 30V Ii = 100mA T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC NOTE: The user must determine the type of protection required for installation of the equipment. The user shall then check the ox [ ] adjacent to the type of protection used on the equipment certification nameplate. Once a type of protection has een checked on the nameplate, susequently the equipment shall not e reinstalled using any of the other certification types. * Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected. Fieldus (Not FISCO/FNICO) Ui = 24V Ii = 250mA Li = 0 T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC

8 8 ST 3000 Smart Pressure Transmitter INMETRO (CERTUSP) Brazil Type of Protection Comm. Option Field Parameters Temp. Codes Flameproof, Zone 1: BR-Ex d C Enclosure IP 66/67 Intrinsically Safe, Zone 0/1: BR-Ex ia C Enclosure IP 66/67 * Li = 0 except Li = 150µH when Option ME, Analog Meter, is selected. All 4-20 ma / DE 4-20 ma / HART Fieldus (Not FISCO) All Ui = 30V Ii = 100mA Ui = 30V Ii = 100mA Ui = 24V Ii = 250mA Li = 0 T5 Ta = 50 to 93ºC T6 Ta = 50 to 78ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 85ºC T6 Ta = 50 to 70ºC T4 Ta = 50 to 93ºC T5 Ta = 50 to 63ºC T6 Ta = 50 to 48ºC T3 Ta = 50 to 93ºC T4 Ta = 50 to 40ºC This certificate defines the certifications covered for the ST 3000 Pressure Transmitter family of products, including the SMV 3000 Smart Multivariale Transmitter. It represents the compilation of the five certificates Honeywell currently has covering the certification of these products into marine applications. For ST 3000 Smart Pressure Transmitter and SMV 3000 Smart Multivarile Transmitter ST 3000 Pressure Transmitter Marine Certificate (MT Option) American Bureau of Shipping (ABS) Steel Vessel Rules 1-1-4/3.7, 4-6-2/5.15, 4-8-3/13 & 13.5, 4-8-4/27.5.1, 4-9-7/13. Certificate numer: 04-HS PDA Bureau Veritas (BV) - Product Code: 389:1H. Certificate numer: 12660/B0 BV Det Norske Veritas (DNV) - Location Classes: Temperature D, Humidity B, Viration A, EMC B, Enclosure C. For salt spray exposure; enclosure of 316 SST or 2-part epoxy protection with 316 SST olts to e applied. Certificate numer: A Korean Register of Shipping (KR) - Certificate numer: LOX17743-AE001 Lloyd's Register (LR) - Certificate numer: 02/60001(E1) & (E2)

9 ST 3000 Smart Pressure Transmitter 9 The ST 3000 Smart Pressure Transmitters are in conformity with the essential requirements of the Pressure Equipment Directive. European Pressure Equipment Directive (PED) (97/23/EC) Honeywell ST 3000 Smart Pressure Transmitters are designed and manufactured in accordance with the applicale portions of Annex I, Essential Safety Requirements, and sound engineering practices. These transmitters have no pressurized internal volume, or have a pressurized internal volume rated less than 200 ar (2,900 psig), and/or have a maximum volume of less than 0.1 liter (Article 3, 1.1.(a) first indent, Group 1 fluids). Therefore, these transmitters are not suject to the essential requirements of the directive 97/23/EC (PED, Annex I) and shall not have the CE mark applied. For transmitters rated > 200 ar (2,900 psig) < 1,000 ar (14,500 psig) Honeywell maintains a technical file in accordance with Annex, Module A, (internal production control) when the CE mark is required. Transmitter Attachments: Seals, Process Flanges and Manifolds comply with Sound Engineering Practice. NOTE: Pressure transmitters that are part of safety equipment for the protection of piping (systems) or vessel(s) from exceeding allowale pressure limits, (equipment with safety functions in accordance with Pressure Equipment Directive 97/23/EC article 1, 2.1.3), require separate examination. A formal statement from TÜV Industry Service Group of TÜV America, Inc., a division of TÜV Süddeutschland, a Notified Body regarding the Pressure Equipment Directive, can e found at A hard copy may e otained y contacting a Honeywell representative. CE Mark Electro Magnetic Compatiility (EMC) (2004/108/EC) All Models: EN : 1992; EN :1995; EN : A1, A2, and A3 Industrial Locations Dual Seal Certification Recommended Frequency of Caliration Approved Manufacturing Locations Dual Seal Certification ased on ANSI/NFPA and ANSI/ISA requirements without the use of additional seal protection elements. Honeywell recommends verifying the caliration of these devices once every four years. Honeywell Process Solutions - York, PA USA Honeywell (Tianjin) Limited Tianjin, P.R. China Honeywell Automation India Ltd. Pune India Foundation TM Fieldus is a trademark of the Fieldus Foundation. Viton is a registered trademark of DuPont HART is a registered trademark of HART Communications Foundation. Teflon is a registered trademark of DuPont. Hastelloy C-276 is a registered trademark of Haynes International. DC 200 is a registered trademark of Dow Corning. Monel 400 is a registered trademark of Special Metals Corporation. FM Approvals SM is a service mark of FM Gloal ST 3000 and Experion are registered trademarks of Honeywell International Inc. Tri-Clamp TM is a trademark of Alfa-Laval. Neeoe is a registered trademark of Stephan Company

10 10 ST 3000 Smart Pressure Transmitter Options Mounting Bracket (Options MB, MX, SB, SX, FB) The mounting racket is availale in either zinc-plated caron steel or stainless steel and is suitale for horizontal or vertical mounting on a two inch (50 millimeter) pipe, as well as wall mounting. An optional flat mounting racket is also availale in caron steel for two inch (50 millimeter) pipe mounting. An option also exists for Marine approved mounting rackets used with Marine certification options. Indicating Meter (Options ME and SM) Two integral meter options are availale. An analog meter (option ME) is availale with a dual 0 to 10 square root and 0 to 100% linear scale. The Smart Meter (option SM) provides an LCD display for oth analog and digital output and can e configured to display pressure in selected engineering units. HART Output Protocol (Options HC and H6) Optional electronic modules for the ST 3000 provide HART Protocol compatiility in either HART 5.x or 6.x formats. Transmitters with a HART Option are compatile with any HART enaled system that provides 5.x or 6.x format support. Foundation TM Fieldus Output (Option FF) Equips transmitter with FF protocol for use in kit/s FF networks. See document 34-ST for additional information on ST 3000 Fieldus transmitters. SIL2/SIL3 Certification (Option SL) This ST 3000 product is availale for use with safety systems. With the SL option, we are fully certified to SIL 2 capaility for single transmitters and SIL 3 capaility for multiple transmitter use through TÜV Nord Sys Tec GmH & Co. KG. We are in compliance with the following SIL standards: NAMUR NE43 Compliance (Option NE) This option provides software the meets the NAMUR NE43 requirements for failsafe software. Transmitter failure information is generated when the measuring information is no longer valid. Transmitter failure values are 3.6 ma and 21.0 ma. The normal ST 3000 ranges are 3.8 ma and 20.8 ma. Write Protection (Options WP and WX) Provides the capaility to hardwire write-protect installed transmitter configurations. Stainless Steel Tagging (Option TG) Up to 30 characters can e added on the stainless steel nameplate mounted on the transmitter s electronics housing at no extra cost. A stainless steel wired on tag with additional data of up to 4 lines of 28 characters is also availale. The numer of characters for tagging includes spaces. Transmitter Configuration (Options TC and FC) With Option TC, the factory can configure the analog, DE or HART transmitter s linear/square root extraction, damping time, LRV, URV and mode (analog/digital) and enter an ID tag of up to eight characters and scratchpad information as specified. With Option FC, the Device ID, Transmitter Tag, Unit Level Node Address, Output Mode and Damping Time Constants can e specified. Custom Caliration and ID in Memory (Option CC) The factory can calirate any range within the scope of the transmitter s range and enter an ID tag of up to eight characters in the transmitter s memory. Indicator Configuration (Option CI) Provides custom configuration of Smart Meters IEC : 1998; IEC : 2000; IEC : 1998 Lightning Protection (Option LP) A terminal lock is availale with circuitry that protects the transmitter from transient surges induced y neary lightning strikes. Lifetime Warranty (Option WL) Extends limited 1-year warranty policy to 15 years for ST 3000 S100 pressure transmitters. See Honeywell Terms and Conditions.

11 ST 3000 Smart Pressure Transmitter 11 Sales and Service For application assistance, current specifications, pricing, or name of the nearest Authorized Distriutor, contact one of the offices elow. Asia Pacific Gloal Technical Support Field Instruments Phone: Fax: Australia Honeywell Limited Phone: +(61) FAX: +(61) Toll Free Toll Free Fax: China PRC - Beijing Honeywell China Inc. Phone: +(86-10) Fax: +(86-10) China PRC - Shanghai Honeywell China Inc. Phone: (86-21) Fax: (86-21) China PRC - Chengdu Honeywell China Inc. Phone: +(86-28) Fax: +(86-28) China PRC - Xi an Honeywell China Ltd - Xi an. Phone: +(86-29) Fax: +(86-29) China PRC - Shenzhen- Honeywell China Inc. Phone: +(86) Fax: +(86) Indonesia PT Honeywell Indonesia Phone: +(62) FAX: +(62) Honeywell Automation India Ltd. Honeywell Ltd. Phone:+(91) Fax: +(91) Japan Honeywell Inc. Phone: +(81) Fax: +(81) Malaysia Honeywell Engineering Sdn Bhd Phone: +(603) Fax: +(603) New Zealand Honeywell Limited Phone: +(64-9) Fax: +(64-9) Toll Free (0800) Singapore Honeywell Pte Ltd. Phone: +(65) Fax: +(65) South Korea Honeywell Korea Co Ltd Phone: +(822) Fax: +(822) Thailand Honeywell Systems (Thailand) Ltd. Phone: +(662) FAX: +(662) Taiwan R.O.C. Honeywell Taiwan Ltd. Phone: +(886-2) FAX: +(886-2) SE Asia Countries see Honeywell Pte Ltd (Singapore) for: Philippines, Pakistan, Camodia, Guam, Laos, Myanmar, Vietnam, East Timor SE Asia Countries see Honeywell Automation India Ltd for: Bangladesh Nepal Sri Lanka EUROPE Austria Honeywell Austria GmH Phone: +43 (316) FAX: +43 (316)40017 Belgium Honeywell SA/NV Phone:+32 (0) FAX: +32 (0) Bulgaria Honeywell EOOD Phone: +(359) FAX: +(359) Czech Repulic Honeywell spol. s.r.o. Phone: FAX: Denmark Honeywell A/S Phone: +(45) FAX: +(45) Finland Honeywell OY Phone: +358 (0) FAX: +358 (0) France Honeywell SA Phone: +33 (0) FAX: +33 (0) Germany Honeywell AG Phone: +49 (69) FAX: +49 (69) Hungary Honeywell Kft. Phone: FAX: Italy Honeywell S.p.A. Phone: FAX: The Netherlands Honeywell B.V. Phone: +31 (0) FAX: +31 (0) Norway Honeywell A/S Phone: (45) Poland Honeywell Sp. zo.o Phone: FAX: Portugal Honeywell Portugal Lda Phone: FAX: Romania Honeywell Bucharest Phone: +40 (0) FAX: +40 (0) Russian Federation (RF), Honeywell Field Solutions Kievskaya str., 7, Moscow , Russia Phone +7 (495) Fax +7 (495) Slovak Repulic Honeywell s.r.o. Phone: FAX: Spain Honeywell S.A. Phone: +34 (0) FAX: +34 (0) Sweden Honeywell AB Phone: +(46) FAX: +(46) Switzerland Honeywell AG Phone: FAX: +(41) Turkey Honeywell Turkey A.S. Phone: FAX: Ukraine Honeywell Tel: Fax: United Kingdom Honeywell Control Systems Ltd. Phone: +44 (0) FAX: +44 (0) MIDDLE EAST Au Dhai U A E Middle East Headquarters Honeywell Middle East Ltd. Phone: FAX: Sultanate of Oman Honeywell & Co Oman LLC Phone: / Ext.33 FAX Saudia Araia Honeywell Turki Araia Ltd Juail Office Phone: Fax: Honeywell - ATCO Dammam Office Phone: Fax: Kuwait Honeywell Kuwait KSC Phone: to 30 Fax: And Phone: /1821Fax: AFRICA Mediterranean & African Distriutors Honeywell SpA Phone: +39 (02) FAX: +39 (02) South Africa (Repulic of) and su saharan Honeywell Southern Africa Honeywell S.A. Pty. Ltd. Phone: FAX NORTH AMERICA Canada Honeywell LTD Phone: FAX: USA Honeywell Process Solutions, Phone: Or askssc@honeywell.com SOUTH AMERICA Argentina Honeywell S.A.I.C. Phone: +(54-11) FAX: +(54-11) Brazil Honeywell do Brasil & Cia Phone: +(55-11) FAX: +(55-11) Chile Honeywell Chile, S.A. Phone: +(56-2) FAX: +(56-2) Mexico Honeywell S.A. de C.V. Phone: +(52) FAX: +(52) Puerto Rico Honeywell Inc. Phone: +(809) FAX: +(809) Trinidad Honeywell Inc. Phone: +(868) FAX: +(868) Venezuela Honeywell CA Phone: +(58-2) FAX: +(58-2)

12 12 ST 3000 Smart Pressure Transmitter Model Guides are suject to change and are inserted into the specifications as guidance only. Prior to specifying or ordering a model check for the latest revision Model Guides which are pulished at: Model Guide 34-ST for ST 3000 Smart Transmitters (DP, GP & AP) Remote Seals Series 100 ST 3000 Smart Transmitter (DP, GP & AP) Remote Seals Series ST-16U-32 Issue 50 Page 1 of 12 Model Guide Instructions Select the desired Key Numer. The arrow to the right marks the selection availale. Make selections from each Tale (I, and IV) using the column elow the proper arrow. Select as many Tale options as desired plus a communications option selection. A ( ) denotes unrestricted availaility. A letter denotes restricted availaility. Restrictions follow Tale IV. Key Numer I (Optional) - _ - -, + IV X X X X KEY NUMBER Description 0-4" to 0-400" H 2 O / 0-10 to 0-1,000 mar Body Rating*: 2,500 psi (172 ar) - Compound Characterized 0-1 to psi / to 0-7 ar Body Rating*: 2,500 psi (172 ar) 0-5 to psia / to 0-35 ar A Body Rating*: 500 psia (35 ar A) 0-5 to psi / ar to 0-35 ar Body Rating*: 500 psi (35 ar) 0-30 to 0-3,000 psi / ar to 210 ar Body Rating*: 3,000 psi (210 ar) STR12D STR13D STR14A STR14G STR17G Availaility * Remote seal system pressure rating is ody rating or seal rating, whichever is less. Important Note: Base STR models no longer include a default communications option. All units now require the selection of a communication option from Tale (AN, DE, HC, H6 or FF). TABLE I - METER BODY Numer of Seals Fill Fluid (Meter ody) Construction In-Line Gauge Dual Head DP Single Head Asolute 1 Remote Seal (High Side) 2 Remote Seals 1 Remote Seal (Low Side) Value Added Model (VAM unit) DC 200 Silicone CTFE Non-Wetted Adapter Head Material 316 SS Bonnet 316 SS Bonnet for Close-Couple 316 SS (olt-on heads) 316 SS for Close-Couple 316 SS with all-welded meter ody 316 SS Adapter Head 316 SS Head for Close-Couple _ 1 _ _ 2 _ q q q A D y A D y C 7 A D y In-Line Gauge Dual Head DP All welded

13 ST 3000 Smart Pressure Transmitter ST-16U-32 Issue 50 Page 2 of 12 TABLE - SEALS Format for Seal : Specify 12 characters 14A Common Required Seal 12D & 13D 14G & 17G Note: The first 3 characters are common to all seals. When selecting required seal, you must specify only the 9 selections within the required seal. Secondary Fill Connection of Remote Seal to Meter Body Capillary Length No Fill Fluid Silicone (DC 200) CTFE Silicone (DC 704) Neoee (M20) 2 Syltherm No Capillary, No Nipple 0 _ _ 2 _ 3 _ 4 _ 5 _ _ feet 1.5 m _ A 10 feet 3.0 m _ B 15 feet 4.5 m _ C 20 feet 6.1 m SS Armor _ D 25 feet 7.5 m _ E 35 feet 10.7 m _ F 5 feet 1.5 m _ G 10 feet 3.0 m _ H 15 feet 4.5 m PVC Coated SS _ J 20 feet 6.1 m Armor _ K 25 feet 7.5 m _ L 35 feet 10.7 m _ M _ 2 z z z 0 _ _ inch long SS nipple close-coupled No No Seal Attached to Core Transmitter Flange Pressure Flange Size Diameter Rating 1 ANSI Class 150 3" 3.5" ANSI Class mm DIN DN80-PN40 Upper Insert 316L SS 316L SS Wetted Material Hastelloy C L SS Hastelloy C-276 Hastelloy C-276 Flush Flanged Seal Monel 400 Tantalum 5 Monel L SS Non-Wetted Material CS (Nickel Plated) (upper) 316L SS Seal-Capillary Center Seal Connection Side Seal Caliration Rings None 316L SS Hastelloy C-276 Monel Standard facing AARH RF (raised face) serrated surface finish. 2 Limited vacuum availaility. 3 Minimum static pressure requirement. No vacuum allowed. See Specifications Figure Tantalum Upper insert has Tantalum wetted parts and 316 SS or CS non-wetted parts Note: Remote seal system pressure rating is ody rating or seal rating, whichever is less. _ AFA _ AFC _ AFM AA AB AC AE AF _ 2 _ _ 1 _ A _ B _ C _ D _ Tale continued next page

14 14 ST 3000 Smart Pressure Transmitter 34-ST-16U-32 Issue 50 Page 3 of 12 STR12D & 13D STR14A 14G & 17G TABLE - SEALS (continued) Flushing None _ 0 Flush Flanged Connections One 1/4" with plastic plug _ H Seal and Plugs 4 One 1/4" with metal plug _ J (Metal plug material Two 1/4" with plastic plugs _ M will e the same as Two 1/4" with metal plugs _ N Cal. ring material if One 1/2" with plastic plug _ P metal plug is chosen - One 1/2" with metal plug _ Q SS Plug for CS Lower) Two 1/2" with plastic plugs _ R Two 1/2" with metal plugs _ S Tale continued elow TABLE - SEALS (continued) STR12D & 13D STR14A 14G & 17G Diameter Flange Size Flange Pressure Rating 1 Const. - See Spec. Figure 34-ST Construction - See Spec. Figure 34-ST Flush Flanged Seal with Lower 2.4" 2.9" 4.1" ANSI _ BCA t 4 1" ANSI _ BCC t 4 ANSI _ BGA t 4 1-1/2" ANSI _ BGC t 4 ANSI _ BDA t 4 2" ANSI _ BDC t 4 ANSI _ BFA t 4 3" ANSI _ BFC t 4 1/2" ANSI _ CAA ANSI _ CCA 1" ANSI _ CCC ANSI _ CGA 1-1/2" ANSI _ CGC ANSI _ CDA 2" ANSI _ CDC 1/2" ANSI _ DAA ANSI _ DCA 1" ANSI _ DCC ANSI _ DGA 1-1/2" ANSI _ DGC ANSI _ DDA 2" ANSI _ DDC ANSI _ DFA 3" ANSI _ DFC Tale continued next page 1 Standard facing AARH RF (raised face) serrated surface finish. 4 Plastic Plugs are TEMPORARY ONLY to protect threads and MUST e REMOVED efore installation Note: Remote seal system pressure rating is ody rating or seal rating, whichever is less.

15 ST 3000 Smart Pressure Transmitter ST-16U-32 Issue 50 Page 4 of 12 STR14A STR12D & 13D 14G & 17G TABLE - SEALS (continued) Lower 316L SS 316L SS BA Hastelloy C L SS BB Wetted Material Hastelloy C-276 Hastelloy C-276 BC Monel 400 Monel 400 BE Tantalum 316L SS BF Tantalum Hastelloy C-276 BG Tantalum Tantalum Clad BH Upper Upper Insert Non-Wetted Material 316L SS 316L SS 4 _ (upper, upper insert) Caron Steel 316L SS 5 _ Bolts 6 No _ 0 Flush Flanged Seal Flushing None 0 _ with Lower Connections One 1/4" with plastic plug H _ and Plugs 4 One 1/4" with metal plug J _ (Metal plug material Two 1/4" with plastic plugs M _ will e the same as Two 1/4" with metal plugs N _ Lower material, if One 1/2" with plastic plug P _ metal plug is chosen - One 1/2" with metal plug Q _ (SS Plug for CS Lower Two 1/2" with plastic plugs R _ and Tantalum Clad) Two 1/2" with metal plugs S _ Klinger C-4401 (non-asestos) _ K c c c Gasket Grafoil _ G Teflon _ T c c c Gylon 3510 _ L d d d Tale continued elow STR14A TABLE - SEALS (continued) STR12D & 13D 14G & 17G Flange Seal with Extended Diameter Flange Size Flange Pressure Rating 1 3" ANSI Class 150 _ EFA 2.8" (2.8" OD ANSI Class 300 _ EFC extension) DIN DN80-PN40 _ EFM 4" ANSI Class 150 _ FGA 3.5" (3.70" OD ANSI Class 300 _ FGC extension DIN DN100-PN40 _ FGP Ext. Tue Wetted Material 316L SS 316L SS EA Hastelloy C L SS EB Hastelloy C-276 Hastelloy C-276 EC Non-Wetted CS (Nickel Plated) 7 _ Material (flange) 316L SS 8 _ Bolts No _ 0 2" 2 _ Extension Length 4" 4 _ 6 _ 6" No No No _ 0 Tale continued next page 1 Standard facing AARH RF (raised face) serrated surface finish. 4 Plastic Plugs are TEMPORARY ONLY to protect threads and MUST e REMOVED efore installation 6 Bolt material will e same as Upper Material. However, if Tale olt/nut option is chosen, seal olt material will e the same. Note: Remote seal system pressure rating is ody rating or seal rating, whichever is less.

16 16 ST 3000 Smart Pressure Transmitter 34-ST-16U-32 Issue 50 Page 5 of 12 STR14A TABLE - SEALS (continued) STR12D & 13D 14G & 17G Diameter Flange Size Flange Pressure Rating Dependent on Customer Flange 1 Pancake Seal 3.5" 3" ANSI Class 150/300/600 _ GFA Body 316L SS 316L SS GA Wetted Material Hastelloy C L SS GB Hastelloy C-276 Hastelloy C-276 GC Monel 400 Monel 400 GE Tantalum Tantalum 7 GG Non-Wetted Material No 0 _ Bolts No _ 0 Caliration Rings None A _ 316L SS B _ Hastelloy C-276 C _ Monel 400 D _ Flushing None _ 0 Connections One 1/4" with plastic plug _ H and Plugs 4 One 1/4" with metal plug _ J (Metal plug material Two 1/4" with plastic plugs _ M will e the same as Two 1/4" with metal plugs _ N Cal. Ring material, if One 1/2" with plastic plug _ P metal plug is chosen - One 1/2" with metal plug _ Q SS Plug for CS Lower) Two 1/2" with plastic plugs _ R Two 1/2" with metal plugs _ S Tale continued elow STR14A TABLE - SEALS (continued) Flange Size Diameter Chemical Tee "Taylor" Wedge 3.5" Taylor Wedge 5" O.D. Wetted Material Non-Wetted Material Bolts Styles No Flange Pressure Rating psi Body 316L SS 316L SS Hastelloy C L SS Hastelloy C-276 Hastelloy C-276 No No No No STR12D & 13D _ HM0 HA HB HC v 14G & 17G Tale continued next page 1 Standard facing AARH RF (raised face) serrated surface finish. 4 Plastic Plugs are TEMPORARY ONLY to protect threads and MUST e REMOVED efore installation 7 Tantalum Body has Tantalum wetted parts and 316 SS non-wetted parts Note: Remote seal system pressure rating is ody rating or seal rating, whichever is less.

17 ST 3000 Smart Pressure Transmitter ST-16U-32 Issue 50 Page 6 of 12 TABLE - SEALS (continued) STR14A Seal with Threaded Process Connection Diameter Threaded Process Connection Size (NPT Female) STR12D & 13D 2.4" 2.9" 4.1" 1/2 NPT _ JJG t 4 2,500 1,250 3/4 NPT _ JKG t 4 psi psi 1 NPT _ JLG t 4 1/2 NPT _ KJG 2,500 1,250 3/4 NPT _ KKG psi psi 1 NPT _ KLG 1/2 NPT _ LJG 1, /4 NPT _ LKG psi psi 1 NPT _ LLG Lower 316L SS Caron Steel JA 316L SS 316L SS JB Wetted Material Hastelloy C L SS JC Hastelloy C-276 Hastelloy C-276 JD Monel 400 Monel 400 JE Tantalum 316L SS JF Tantalum Hastelloy C-276 JG Non-Wetted Material CS (Nickel Plated) A _ (upper) Stainless Steel C _ w w w Bolts 8 Caron Steel _ C SS _ D Flushing None 0 _ Connections One 1/4" with plastic plug H _ and Plugs 4 One 1/4" with metal plug J _ (Metal plug material Two 1/4" with plastic plugs M _ will e the same as Two 1/4" with metal plugs N _ Lower material, if One 1/2" with plastic plug P _ metal plug is chosen - One 1/2" with metal plug Q _ (SS Plug for CS Lower Two 1/2" with plastic plugs R _ and Tantalum Clad) Two 1/2" with metal plugs S _ Klinger C-4401 (non-asestos) Gasket Grafoil Teflon Gylon 3510 Pressure Rating CS Bolts 304 SS Bolts _ K _ G _ T c c c _ L d d d c c 14G & 17G Tale continued next page c 4 Plastic Plugs are TEMPORARY ONLY to protect threads and MUST e REMOVED efore installation 8 If Tale Bolt/Nut option is chosen, Seal olts will ship as same material, and MAWP may change. Note: Remote seal system pressure rating is ody rating or seal rating, whichever is less.

18 18 ST 3000 Smart Pressure Transmitter 34-ST-16U-32 Issue 50 Page 7 of 12 STR14A 14G & 17G TABLE - SEALS (continued) STR12D & 13D Diameter Flange Size Pressure Rating 1.9" 2" _ MD " 2-1/2" Customer clamp rating or _ NE " 3" 600 psi, whichever is less _ PF " 4" _ QG Body Wetted Material 316L SS N A Sanitary Seal 9 316L SS Non-Wetted Material No 0 _ Saddle Seal Diameter 2.4" 8-Bolt Design 2.4" 6-Bolt Design Bolts Styles Gasket Bolts Styles Gasket Size and Bolt Pattern for 3" Pipe 4" pipe for 3" Pipe 4" pipe Wetted Material Non-Wetted Material No Tri-Clover Tri-Clamp No Seal Pressure Rating C.S. Bolts 1,500 psi 304 SS Bolts 1,500 psi _ 0 8 _ _ 0 _ RFK _ RGK _ RPK t 4 1,250 psi 1,250 psi _ RQK t 4 Lower Housing 316L SS Caron Steel RA 316L SS 316L SS RB Hastelloy C L SS RC Hastelloy C-276 Hastelloy C-276 RD 316L SS N/A-Body Only 10 SB Hastelloy C-276 N/A-Body Only 10 SC 8, 10 Body Bolts Caron Steel Caron Steel B _ L SS 304 SS C _ No _ 0 No 0 _ Klinger C-4401 _ K (non-asestos) Grafoil _ G Teflon _ T Gylon 3510 _ L t t If Tale Bolt/Nut option is chosen, Seal olts will ship as same material, and MAWP may change. 9 All sanitary seals have dairy grade 3A approval. 10 Bolts are not included with "ody only" selection. Note: Remote seal system pressure rating is ody rating or seal rating, whichever is less.

19 ST 3000 Smart Pressure Transmitter ST-16U-32 Issue 50 Page 8 of 12 TABLE - OPTIONS Communication Options (Must choose a communications option) Analog only (can e configured using appropriate Honeywell DE tool) DE Protocol communications HART 5.x Protocol compatile electronics HART 6.x Protocol compatile electronics FOUNDATION TM Fieldus Communications Indicating Meter Options Analog Meter (0-100 Even 0-10 Square Root) Smart Meter Custom Configuration of Smart Meter Local Zero & Span Local Zero Transmitter Housing & Electronics Options No housing conduit plugs or adaptors come standard with the ST For certain approval codes, you must select a certified conduit plug from elow and it will come packaged in the ox with your transmitter. 316 SS 5 Electronics Housing - (with M20 Conduit Connections) 316 SS 5 Electronics Housing - (with M20 to 1/2 NPT 316 SS Conduit Adapter for use with FM and CSA Approval codes) 1/2 NPT Male to M20 Female 316 SS Certified Conduit Adapter ( ATEX, CSA & IECEx) 1/2 NPT Male to 3/4 NPT Female 316 SS Certified Conduit Adapter (ATEX, CSA & IECEx) M20 Male to 1/2 NPT Female 316 SS Certified Conduit Adaptor (ATEX, CSA & IECEx) 1/2 NPT Zinc-plated Certified Conduit Plug (ATEX, CSA & IECEx) 1/2 NPT 316 SS Certified Conduit Plug (ATEX, CSA & IECEx) M SS Certified Conduit Plug (ATEX, CSA & IECEx) 1/2 NPT Non-certified Conduit plug (Zinc-plated caron steel, general use) NAMUR Failsafe Software SIL 2 - TÜV Certified transmitter (requires HC or H6 and WP options) Lightning Protection Custom Caliration and I.D. in Memory Transmitter Configuration - (non-fieldus) Transmitter Configuration - (Fieldus) Write Protection (Delivered in the "enaled" position) Write Protection (Delivered in the "disaled" position) Stainless Steel Customer Wired-On Tag (4 lines, 26 characters per line, customer supplied information) Stainless Steel Customer Wired-On Tag (lank) Meter Body Options (Seal olt material depends on Transmitter olt material) A286 SS (NACE) Bolts and 304 SS (NACE) Nuts for Heads 316 SS Bolts and 316 SS Nuts for Process Heads B7M Bolts and Nuts for Process Heads Remote Seal Options Gold Plated Seal (1 Seal) Gold Plated Seal (2 Seals) Teflon Coated Seal (1 Seal) - only for anti-sticking Teflon Coated Seal s (2 Seals) - only for anti-sticking Transmitter Mounting Bracket Options Angle Mounting Bracket - Caron Steel Marine Approved Angle Mounting Bracket - Caron Steel Angle Mounting Bracket SS Marine Approved Angle Mounting Bracket SS Flat Mounting Bracket - Caron Steel Services/Certificates/Marine Type Approvals Options Users Manual Paper Copy (Standard, HC/H6 or FF ships accordingly) Clean Transmitter for Oxygen or Chlorine Service with Certificate ( ) Over-Pressure Leak Test with Certificate (F3392) Caliration Test Report and Certificate of Conformance (F3399) Certificate of Conformance (F3391) Certificate of Origin (F0195) SIL Certificate (SIL 2/3) (FC33337) NACE Certificate (Process-Wetted & Non-Process Wetted) (FC33339) NACE Certificate for all welded meter odies only (F0198) NACE Certificate (Process-Wetted only) (FC33338) Material Traceaility Certification per EN (FC33341) Marine Type Approvals (DNV, ABS, BV, KR & LR) STR12D & 13D AN DE HC H6 FF STR14A 14G & 17G r r r ME SM CI f f f ZS m m LZ x x SH A3 A1 A2 n n n i i i A4 A5 A6 A7 A8 NE SL LP CC TC FC WP WX TG TB CR SS B7 G1 j j j G2 j N1 j j j N2 j MB MX SB SX FB UM 0X h h h TP F1 F3 F5 FE F7 o o F8 16 FG FX MT Supplied as 316 SS or as Grade CF8M, the casting equivalent of 316 SS.

20 20 ST 3000 Smart Pressure Transmitter 34-ST-16U-32 Issue 50 Page 9 of 12 TABLE - OPTIONS (continued) Warranty Options Additional Warranty - 1 year Additional Warranty - 2 years Additional Warranty - 3 years Additional Warranty - 4 years STR12D & 13D STR14A 14G & 17G W1 W2 W3 W4 Approval Body Approval Type Location or Classification No hazardous location approvals Intrinsically Safe, Zone 0 Intrinsically Safe, Zone 1 Dust-tight Enclosure Zone 0 Ex ia C T4 (Ta = 50 C to +93 C); T5 (Ta = 50 C to +85 C); T6 (Ta = 50 C to +70 C) Enclosure IP 66/67 Ex ia C T4 (Ta = 50 C to +93 C); T5 (Ta = 50 C to +85 C); T6 (Ta = 50 C to +70 C) Enclosure IP 66/67 Ex td A20 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C) Enclosure IP 66/67 9X 3S Flameproof and Dusttight Enclosure, Zone 1 Ex d C T5 (Ta = 40 C to +93 C), T6 (Ta = 40 C to +78 C) Supply 11-42Vdc Ex td A21 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C) Enclosure IP 66/ ATEX 10 (LCIE) Non-Sparking, Zone 2 Ex na, C T5 (Ta = 40 C to +93 C), T6 (Ta = 40 C to +78 C); Zone 2 Supply < 42Vdc, 23mA Ex td A22 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C) (Honeywell). Enclosure IP 66/67 3N Multiple Marking 11 Ex ia C T4 (Ta = 50 C to +93 C); T5 (Ta = 50 C to +85 C); T6 (Ta = 50 C to +70 C); Ui = 30V; Ii = 100mA Ex td A20 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C) Int. Safe, Zone 0/1 and Dust-tight Enclosure, or Flameproof, Zone 1 and and Dust-tight Enclosure, Ex d C T5 (Ta = 40 C to +93 C), T6 (Ta = 40 C to +78 C) Supply 11-42Vdc Ex td A21 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C) 3C or Non-Sparking, Zone 2 Ex na, C T5 (Ta = 40 C to +93 C), T6 (Ta = 40 C to +78 C); Zone 2 Supply < 42Vdc, 23mA Ex td A22 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C) (Honeywell) Enclosure IP 66/67 Tale Approvals continued next page

21 ST 3000 Smart Pressure Transmitter ST-16U-32 Issue 50 Page 10 of 12 TABLE - Approvals Options (continued) STR12D & 13D STR14A 14G & 17G Approval Body Approval Type Location or Classification FM Approvals SM Canadian Standards Association (CSA) IECEx SAEx (South Africa) CERTUSP INMETRO (Brazil) Explosion Proof Dust-Ignitionproof Non-Incendive Intrinsically Safe Explosion Proof Dust-Ignitionproof Intrinsically Safe Flameproof, Zone 1 Intrinsically Safe, Zone 0/1 Class I, Div. 1, Groups A,B,C,D Class, Div. 1, Groups E,F,G Class I, Div. 2, Groups A,B,C,D Class I,,, Div. 1, Groups A,B,C,D,E,F,G Class I, Div. 1, Groups B,C,D Class,, Div. 1, Groups E,F,G Class I,,, Div. 1, Groups A,B,C,D,E,F,G Ex d C T5 (Ta = -40 to +93ºC), T6 (Ta = -40 to +78ºC) Ex ia C; T3, T4, T5, T6 See Spec for detailed temperature codes y Communications option Intrinsically Safe, Zone 0/1 Ex ia C T4, T5, T6 Flameproof, Zone 1 Ex d C T5, T6 Enclosure IP 66/67 Multiple Marking 11 Int. Safe, Zone 0/1, or Ex ia C T4, T5, T6 Flameproof, Zone 1 Ex d C T5, T6 Enclosure IP 66/67 Flameproof, Zone 1 BR- Ex d C T5, T6 Intrinsically Safe, BR- Ex ia C; T4, T5, T6 (See CERTUSP certificate for detailed temperature Zone 0/1 codes y Communications option) 1C 2J CA Z2 ZD ZA 6D 6S See ATEX installation requirements in the ST 3000 User's Manual 11 The user must determine the type of protection required for installation of the equipment. The user shall then check the ox [ ] adjacent to the type of protection used on the equipment certification nameplate. Once a type of protection has een checked on the nameplate, susequently the equipment shall not e reinstalled using any of the other certification types. TABLE IV Factory Identification X X X X Ordering Example: STR12D-11A-0A0AFAAA11AH-HC,LP,2J+XXXX

22 22 ST 3000 Smart Pressure Transmitter 34-ST-16U-32 Issue 50 Page 11 of 12 RESTRICTIONS Restriction Availale Only With Not Availale With Letter Tale Tale Select only one option from this group c BF, BG, JF, JG, d BF, BG, BH, JF, JG, f h I, SM _ 2 _ - 2 _ i 1C or 2J j AF BF BG BH GG JF JG m ME, FF n 1C, 2J o q CR 0 _, 2 _ 4 _ r t FISCO/FNICO compliance availale only with 1C I & TC, ME or FISCO/FNICO compliance not availale with 3C, 3N, 33, 3S, 2J, CA, Z2, ZD, ZA, 6D & 6S 2 - _ B, 2 - _ C, 2 - _ D, 2 - _ E, 2 - _ F, 2 - _ H, 2 - _ J, 2 - _ K, 2 - _ L, 2 - _ M

23 ST 3000 Smart Pressure Transmitter ST-16U-32 Issue 50 Page 12 of 12 RESTRICTIONS (continued) Restriction Availale Only With Not Availale With Letter Tale Tale v I 2 w JA x FF, SM I 2 y MB, SB, FB _ 2 z I D 1 F7 2 MX, SX FB, MB, SB 3 I 5 See Figure 23 in Specification _ A, _ G, 4 _ B, _ H, _ 2, 5 _ 0 6 A _ I 1, 3 7 CR CC, G1, G2, N1, N2, 0X, TP, MT, TC, 8 FC, F1 AA2 _ 9 AB2 _ 10 0 _JJG _JKG _JLG _ 11 CAA _CCA _CCC _ 14 HC or H6 and WP FF 15 FF 16 I C 21 FF 22 SL 24 I & 2 - _ 2 _ T F7 25 _ A, _G, _2 26 This approval code requires the selection of a certified conduit plug: A5, A6 or A7 FM Approvals SM is a service mark of FM Gloal Hastelloy is a registered trademark of Haynes International Monel 400 is a registered trademark of Special Metals Corporation. HART is a registered trademark of HART Communication Foundation. FOUNDATION TM Fieldus is a registered trademark of Fieldus Foundation. Teflon is a registered trademark of DuPont. Neoee is a registered trademark of Stepan Company. Syltherm 800 is a Trademark of Dow Corning Corporation Klinger C-4401 is a registered trademark of THERMOSEAL, INC GRAFOIL is a registered trademarks of GrafTech International Holdings Inc Gylon 3510 is registered trademark of Garlock Sealing Technologies Tri-Clover Tri-Clamp is a registered trademark of Alfa-Laval DC 200 and DC 704 are registered trademarks of Dow Corning

24 24 ST 3000 Smart Pressure Transmitter Model Guides are suject to change and are inserted into the specifications as guidance only. Prior to specifying or ordering a model check for the latest revision Model Guides which are pulished at: Model Guide 34-ST for ST 3000 Smart Transmitters (DP, GP) Remote Seals Series 900 ST 3000 Smart Transmitter (DP & GP) Remote Seals Series ST-16U-34 Issue 47 Page 1 of 11 Model Guide Instructions Select the desired Key Numer. The arrow to the right marks the selection availale. Make selections from each Tale (I, and IV), using the column elow the proper arrow. Select as many Tale options as desired plus a communications option selection. A ( ) denotes unrestricted availaility. A letter denotes restricted availaility. Restrictions follow Tale IV. Key Numer I (Optional) - _ - -,, + IV X X X X KEY NUMBER Description 0-25" to 0-2,700" H 2 O / to 0-7,000 mar Body Rating*: 750 psi (51.7 ar) Compound Characterized 0-5 to psig / to 0-35 ar Body Rating*: 500 psi (35 ar) STR93D STR94G Avail. * Remote seal system pressure rating is ody rating or seal rating, whichever is less. Important Note: Base STR models no longer include a default communications option. All units now require the selection of a communication option from Tale (AN, DE, HC, H6 or FF). TABLE I - METER BODY Numer of Seals Fill Fluid (Meter Body) Construction In-Line Gauge Dual Head DP Description 1 Remote Seal (High Side) 2 Remote Seals 1 Remote Seal (Low Side) Value Added Model (VAM unit) DC 200 Silicone CTFE Non-Wetted Material 316 SS 316 SS for Close-Couple 316 SS Heads 316 SS Heads for Close-Couple connection 316 SS with all-welded meter ody _ 1 2 _ q q A D A D y C 7 y See Specification Sheet 34-ST for figures on construction. In-Line Gauge Dual Head DP All Welded

25 ST 3000 Smart Pressure Transmitter ST-16U-34 Issue 47 Page 2 of 11 TABLE - SEALS Format for Seal : Specify 12 characters Common Required Seal Availaility Note: The first 3 characters are common to all seals. STR9xx When selecting required seal, you must specify only the 9 selections within the required seal. 3D 4G No Fill Fluid 0 _ 3 3 Silicone DC _ Secondary Fill CTFE 2 _ Silicone DC _ Neoee M _ Syltherm _ No Capillary, No Nipple _ feet 1.5 m _ A 10 feet 3.0 m _ B Connection of Remote Seal to Meter Body 15 feet 4.5 m _ C SS Armor 20 feet 6.1 m _ D 25 feet 7.5 m _ E 35 feet 10.7 m _ F 5 feet 1.5 m _ G 10 feet 3.0 m _ H 15 feet 4.5 m PVC Coated _ J 20 feet 6.1 m SS Armor _ K 25 feet 7.5 m _ L 35 feet 10.7 m _ M 2 inch long SS nipple close-coupled _ 2 z z No 0 _ No Seal Attached to Core Transmitter _ Flush Flanged Seal Capillary Length Diameter 3.5" Flange Size 3" 80mm Wetted Material Flange Material Seal-Capillary Connection Caliration Rings Flange Pressure Rating 1 ANSI Class 150 ANSI Class 300 DIN DN80-PN40 Upper Insert 316L SS 316L SS Hastelloy C L SS Hastelloy C-276 Hastelloy C-276 Monel 400 Monel 400 Tantalum 5 316L SS CS (Nickel Plated) 316L SS Center Seal Side Seal None 316L SS Hastelloy C-276 Monel Standard facing AARH RF (raised face) serrated surface finish. 2 Limited vacuum availaility. 3 Minimum static pressure requirement. No vacuum allowed. See Specifications Figure Tantalum Upper insert has Tantalum wetted parts and 316 SS or CS non-wetted parts Note: Remote seal system pressure rating is ody rating or seal rating, whichever is less. _ AFA _ AFC _ AFM AA AB AC AE AF _ 2 1 _ A _ B _ 5 5 C _ 5 5 D _ 5 5 Tale continued next page

26 26 ST 3000 Smart Pressure Transmitter 34-ST-16U-34 Issue 47 Page 3 of 11 Availaility STR9xx TABLE - SEALS (continued) Description 3D 4G Flushing None _ 0 Flush Flanged Connections One 1/4" with plastic plug _ H 6 6 Seal and Plugs 4 One 1/4" with metal plug _ J 6 6 Metal plug material Two 1/4" with plastic plugs _ M 6 6 will e the same as Two 1/4" with metal plugs _ N 6 6 Lower material, if One 1/2" with plastic plug _ P 6 6 metal plug is chosen - One 1/2" with metal plug _ Q 6 6 (SS Plug for CS Lower Two 1/2" with plastic plugs _ R 6 6 and Tantalum Clad) Two 1/2" with metal plugs _ S 6 6 Tale continued elow STR9xx Flush Flanged Seal with Lower Diameter 2.4" 2.9" 4.1" 3D 4G Flange Size Const. - See Spec. Flange Pressure Figure 34-ST-03- Rating " 1-1/2" 2" 3" ANSI _ BCA ANSI _ BCC ANSI _ BGA ANSI _ BGC ANSI _ BDA ANSI _ BDC ANSI _ BFA ANSI _ BFC 1/2" ANSI _ CAA 1" 1-1/2" 2" ANSI _ CCA ANSI _ CCC ANSI _ CGA ANSI _ CGC ANSI _ CDA ANSI _ CDC 1/2" ANSI _ DAA 1" 1-1/2" 2" 3" ANSI _ DCA ANSI _ DCC ANSI _ DGA ANSI _ DGC ANSI _ DDA ANSI _ DDC ANSI _ DFA ANSI _ DFC Tale continued next page 1 Standard facing AARH RF (raised face) serrated surface finish. 4 Plastic Plugs are TEMPORARY ONLY to protect threads and MUST e REMOVED efore installation Note: Remote seal system pressure rating is ody rating or seal rating, whichever is less.

27 ST 3000 Smart Pressure Transmitter ST-16U-34 Issue 47 Page 4 of 11 TABLE - SEALS (continued) Flush Flanged Seal with Lower (continued) Flange Seal with Extended STR9xx Availaility Lower 3D 4G 316L SS 316L SS BA Hastelloy C L SS BB Wetted Material Hastelloy C-276 Hastelloy C-276 BC Monel 400 Monel 400 BE Tantalum 316L SS BF 1 1 Tantalum Hastelloy C-276 BG 1 1 Tantalum Tantalum Clad BH Upper Upper Insert Non-Wetted Material 316L SS 316L SS 4 _ (upper, upper insert) Caron Steel 316L SS 5 _ Bolts 6 No _ 0 Flushing None 0 _ Connections One 1/4" with plastic plug H _ and Plugs 4 One 1/4" with metal plug J _ Metal plug material Two 1/4" with plastic plugs M _ will e the same as Two 1/4" with metal plugs N _ Lower material, if One 1/2" with plastic plug P _ metal plug is chosen - One 1/2" with metal plug Q _ (SS Plug for CS Lower Two 1/2" with plastic plugs R _ and Tantalum Clad) Two 1/2" with metal plugs S _ Klinger C-4401 (non-asestos) _ K c c Gasket Grafoil _ G Teflon _ T c c Gylon 3510 _ L d d Diameter Flange Size Flange Pressure Rating 1 3" ANSI Class 150 _ EFA 2.8" (2.8" OD ANSI Class 300 _ EFC extension) DIN DN80-PN40 _ EFM 4" ANSI Class 150 _ FGA 3.5" (3.70" OD ANSI Class 300 _ FGC extension) DIN DN100-PN40 _ FGP Ext. Tue Wetted Material 316L SS 316L SS EA Hastelloy C L SS EB Hastelloy C-276 Hastelloy C-276 EC Flange Material CS (Nickel Plated) 7 _ 316L SS 8 _ Bolts No _ 0 2" 2 _ Extension Length 4" 4 _ 6" 6 _ No No _ 0 Tale continued next page 1 Standard facing AARH RF (raised face) serrated surface finish. 4 Plastic Plugs are TEMPORARY ONLY to protect threads and MUST e REMOVED efore installation 6 Bolt material will e same as Upper Material. However, if Tale olt/nut option is chosen, seal olt material will e the same. Note: Remote seal system pressure rating is ody rating or seal rating, whichever is less.

28 28 ST 3000 Smart Pressure Transmitter 34-ST-16U-34 Issue 47 Page 5 of 11 TABLE - SEALS (continued) STR9xx Availaility Diameter Flange Size Flange Pressure Rating Dependent on Customer Flange 1 3D 4G Pancake Seal 3.5" 3" ANSI Class 150/300/600 _ GFA Body 316L SS 316L SS GA Wetted Material Hastelloy C L SS GB Hastelloy C-276 Hastelloy C-276 GC Monel 400 Monel 400 GE Tantalum Tantalum 7 GG 1 1 Non-Wetted Materials No 0 _ No No _ 0 Caliration Rings None A _ 316L SS B _ 5 5 Hastelloy C-276 C _ 5 5 Monel 400 D _ 5 5 Flushing None _ 0 Connections One 1/4" with plastic plug _ H 6 6 and Plugs 4 One 1/4" with metal plug _ J 6 6 Metal plug material Two 1/4" with plastic plugs _ M 6 6 will e the same as Two 1/4" with metal plugs _ N 6 6 Lower material, if One 1/2" with plastic plug _ P 6 6 metal plug is chosen - One 1/2" with metal plug _ Q 6 6 (SS Plug for CS Lower Two 1/2" with plastic plugs _ R 6 6 and Tantalum Clad) Two 1/2" with metal plugs _ S 6 6 Tale continued elow TABLE - SEALS (continued) Flange Size Diameter Taylor 3.5" Wedge 5" O.D. Chemical Tee "Taylor" Wedge Wetted Material Non-Wetted Material Bolts Styles No Flange Pressure Rating psi Body 316L SS 316L SS Hastelloy C L SS Hastelloy C-276 Hastelloy C-276 No No No No STR9xx _ HM0 HA HB HC Tale continued next page Availaility 3D v 4G 1 Standard facing AARH RF (raised face) serrated surface finish. 4 Plastic Plugs are TEMPORARY ONLY to protect threads and MUST e REMOVED efore installation 7 Tantalum Body has Tantalum wetted parts and 316 SS non-wetted parts Note: Remote seal system pressure rating is ody rating or seal rating, whichever is less.

29 ST 3000 Smart Pressure Transmitter ST-16U-34 Issue 47 Page 6 of 11 Availaility STR9xx TABLE - SEALS (continued) Seal Pressure Rating Threaded Process Connection * 3D 4G Diameter Size (NPT Female) 304 SS C.S. Bolts Bolts 1/2 NPT _ JJG 2.4" 3/4 NPT 2,500 psi 1,250 psi _ JKG 1 NPT _ JLG 1/2 NPT _ KJG 2.9" 3/4 NPT 2,500 psi 1,250 psi _ KKG 1 NPT _ KLG 1/2 NPT _ LJG 4.1" 3/4 NPT 1,500 psi 750 psi _ LKG 1 NPT _ LLG Lower 316L SS Caron Steel JA 316L SS 316L SS JB Hastelloy C L SS JC Wetted Material Hastelloy C-276 Hastelloy C-276 JD Monel 400 Monel 400 JE Tantalum 316L SS JF 1 1 Seal with Tantalum Hastelloy C-276 JG 1 1 Threaded Non-Wetted Material CS (Nickel Plated) A _ Process (upper) Stainless Steel C _ w w Connection Caron Steel _ C 1 1 Bolts SS _ D Flushing None 0 _ Connections One 1/4" with plastic plug H _ and Plugs 4 One 1/4" with metal plug J _ Metal plug material Two 1/4" with plastic plugs M _ will e the same as Two 1/4" with metal plugs N _ Lower material, if One 1/2" with plastic plug P _ metal plug is chosen - One 1/2" with metal plug Q _ (SS Plug for CS Lower Two 1/2" with plastic plugs R _ and Tantalum Clad) Two 1/2" with metal plugs S _ Gasket Klinger C-4401 (non-asestos) Grafoil Teflon Gylon 3510 _ K _ G _ T c c _ L d d c c 4 Plastic Plugs are TEMPORARY ONLY to protect threads and MUST e REMOVED efore installation 8 If Tale Bolt/Nut option is chosen, Seal olts will ship as same material, and MAWP may change. Note: Remote seal system pressure rating is ody rating or seal rating, whichever is less.

30 30 ST 3000 Smart Pressure Transmitter Availaility STR9xx TABLE - SEALS (continued) Diameter Flange Size Pressure Rating 3D 4G 1.9" 2" _ MD " 2-1/2" Customer clamp rating or _ NE " 3" 600 psi, whichever is less _ PF " 4" _ QG Wetted Material Body 316L SS 316L SS N A Sanitary Seal 9 Non-Wetted Material No 0 _ Bolts No _ 0 Styles Tri-Clover Tri-Clamp 8 _ Gasket No _ 0 Diameter Size and Bolt Pattern Seal Pressure Rating * * C.S. Bolts 304 SS Bolts 34-ST-16U-34 Issue 47 Page 7 of 11 Saddle Seal 2.4" 8-Bolt Design 2.4" 6-Bolt Design for 3" Pipe 4" pipe Wetted Material Non-Wetted Material No Styles Gasket for 3" Pipe 4" pipe 1,500 psi _ RPK 1,250 psi 1,250 psi _ RQK Lower Housing 316L SS Caron Steel RA 316L SS 316L SS RB Hastelloy C L SS RC Hastelloy C-276 Hastelloy C-276 RD 316L SS N/A-Body Only 10 SB Hastelloy C-276 N/A-Body Only 10 SC Body Caron Steel 8, 10 Bolts Caron Steel B _ L SS 304 SS C _ No _ 0 No 0 _ Klinger C-4401 (non-asestos) Grafoil Teflon Gylon ,500 psi _ RFK _ RGK _ K _ G _ T _ L 8 If Tale Bolt/Nut option is chosen, Seal olts will ship as same material, and MAWP may change. 9 All sanitary seals have dairy grade 3A approval. 10 Bolts are not included with "ody only" selection. Note: Remote seal system pressure rating is ody rating or seal rating, whichever is less.

31 ST 3000 Smart Pressure Transmitter ST-16U-34 Issue 47 Page 8 of 11 Availaility STR9xx TABLE - OPTIONS Communication Options (Must choose a communications option) Analog only (can e configured using appropriate Honeywell DE tool) DE Protocol communications HART 5.x Protocol compatile electronics HART 6.x Protocol compatile electronics FOUNDATION TM Fieldus Communications Indicating Meter Options Analog Meter (0-100 Even 0-10 Square Root) Smart Meter Custom Configuration of Smart Meter Local Zero Local Zero and Span Transmitter Housing & Electronics Options No housing conduit plugs or adaptors come standard with the ST For certain approval codes, you must select a certified conduit plug from elow and it will come packaged in the ox with your transmitter. 316 SS 5 Electronics Housing - (with M20 Conduit Connections) SH n 316 SS 5 Electronics Housing - (with M20 to 1/2 NPT 316 SS Conduit Adapter for use with FM and CSA Approval codes) A3 i 1/2 NPT Male to M20 Female 316 SS Certified Conduit Adapter (ATEX, CSA & IECEx) A1 1/2 NPT Male to 3/4 NPT Female 316 SS Certified Conduit Adapter (ATEX, CSA & IECEx) A2 M20 Male to 1/2 NPT Female 316 SS Certified Conduit Adaptor (ATEX, CSA & IECEx) A4 1/2 NPT Zinc-plated Certified Conduit Plug (ATEX, CSA & IECEx) A5 1/2 NPT 316 SS Certified Conduit Plug (ATEX, CSA & IECEx) A6 M SS Certified Conduit Plug (ATEX, CSA & IECEx) A7 1/2 NPT Non-certified Conduit plug (Zinc-plated caron steel, general use) A8 NAMUR Failsafe Software NE SIL 2 - TÜV Certified transmitter (requires HC or H6 and WP options) SL Lightning Protection LP Custom Caliration and I.D. in Memory CC Transmitter Configuration - (non-fieldus) TC Transmitter Configuration - (Fieldus) FC Write Protection (Delivered in the "enaled" position) WP Write Protection (Delivered in the "disaled" position) WX Stainless Steel Customer Wired-On Tag (4 lines, 26 characters per line, customer supplied information) TG Stainless Steel Customer Wired-On Tag (lank) TB Meter Body Options (Caron Steel standard) A286 SS (NACE) Bolts and 304 SS (NACE) Nuts for Heads CR 316 SS Bolts and 316 SS Nuts for Process Heads SS B7M Bolts and Nuts for Process Heads B7 Remote Seal Options Gold Plated Seal (1 Seal) G1 j Gold Plated Seal (2 Seals) G2 j Teflon Coated Seal (1 Seal) - only for anti-sticking N1 j Teflon Coated Seal s(2 Seals) - only for anti-sticking N2 j Transmitter Mounting Bracket Options Angle Mounting Bracket - Caron Steel MB Marine Approved Angle Mounting Bracket - Caron Steel MX Angle Mounting Bracket SS SB Marine Approved Angle Mounting Bracket SS SX Flat Mounting Bracket - Caron Steel FB Services/Certificates Options Users Manual Paper Copy (Standard, HC/H6 or FF ships accordingly) UM Clean Transmitter & Seals for Oxygen or Chlorine Service with Certificate 0X Over-Pressure Leak Test with Certificate (F3392) TP Caliration Test Report and Certificate of Conformance (F3399) F1 Certificate of Conformance (F3391) F3 Certificate of Origin (F0195) F5 SIL Certificate (SIL 2/3) (FC33337) FE NACE Certificate (Process-Wetted & Non-Process Wetted) (FC33339) F7 NACE Certificate for welded meter odies only (F0198) F8 NACE Certificate (Process-Wetted) (FC33338) FG Material Traceaility Certification per EN (FC33341) FX Marine Type Approvals (DNV, ABS, BV, KR & LR) MT Tale continued next page 5 Supplied as 316 SS or as Grade CF8M, the casting equivalent of 316 SS. AN DE HC H6 FF ME SM CI LZ ZS 3D 4G r r m m x x s s n i j j h h o

32 32 ST 3000 Smart Pressure Transmitter

33 ST 3000 Smart Pressure Transmitter ST-16U-34 Issue 47 Page 9 of 11 TABLE - OPTIONS (continued) Warranty Options Additional Warranty - 1 year Additional Warranty - 2 years Additional Warranty - 3 years Additional Warranty - 4 years STR9xx 3D 4G W1 W2 W3 W4 Approval Approval Type Body No hazardous location approvals Explosion Proof FM Dust-Ignitionproof Approvals SM Non-Incendive Intrinsically Safe Intrinsically Safe, Zone 0 Intrinsically Safe, Zone 1 Dust-tight Enclosure, Zone 0 Location or Classification Class I, Div. 1, Groups A,B,C,D Class, Div. 1, Groups E,F,G Class I, Div. 2, Groups A,B,C,D Class I,,, Div. 1, Groups A,B,C,D,E,F,G Ex ia C T4 (Ta = 50 C to +93 C); T5 (Ta = 50 C to +85 C); T6 (Ta = 50 C to +70 C) Enclosure IP 66/67 Ex ia C T4 (Ta = 50 C to +93 C); T5 (Ta = 50 C to +85 C); T6 (Ta = 50 C to +70 C) Enclosure IP 66/67 Ex td A20 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C)) Enclosure IP 66/67 3D 9X 1C 3S 4G Flameproof and Dust-tight Enclosure, Zone 1 Ex d C T5 (Ta = 40 C to +93 C), T6 (Ta = 40 C to +78 C) Supply 11-42Vdc Ex td A21 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C) Enclosure IP 66/ ATEX 10 (LCIE) Non-Sparking, Zone 2 Ex na, C T5 (Ta = 40 C to +93 C), T6 (Ta = 40 C to +78 C); Zone 2 Supply < 42Vdc, 23mA Ex td A22 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C) (Honeywell). Enclosure IP 66/67 3N Multiple Marking 11 Int. Safe, Zone 0/1 and Dust-tight Enclosure, or Flameproof, Zone 1 and and Dust-tight Enclosure, or Non-Sparking, Zone 2 Ex ia C T4 (Ta = 50 C to +93 C); T5 (Ta = 50 C to +85 C); T6 (Ta = 50 C to +70 C); Ui = 30V; Ii = 100mA Ex td A20 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C) Ex d C T5 (Ta = 40 C to +93 C), T6 (Ta = 40 C to +78 C) Supply 11-42Vdc Ex td A21 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C) Ex na, C T5 (Ta = 40 C to +93 C), T6 (Ta = 40 C to +78 C); Zone 2 Supply < 42Vdc, 23mA Ex td A22 IP6X T95 C (at Ta = 93 C) or T80 C (at Ta = 78 C) (Honeywell) Enclosure IP 66/67 3C Tale Approvals continued next page