CYPRUS ORGANIZATION FOR THE PROMOTION OF QUALITY CYPRUS ACCREDITATION BODY. ACCREDITATION CERTIFICATE no. IB 002-2
|
|
- Irene Green
- 6 years ago
- Views:
Transcription
1 CYPRUS ORGANIZATION FOR THE PROMOTION OF QUALITY CYPRUS ACCREDITATION BODY ACCREDITATION CERTIFICATE no. IB The Board of Governors of the Cyprus Organization for the Promotion of Quality acting as the authorized Cyprus Accreditation Body according to the Article 7 of the Law 156(Ι)/2002 grants accreditation to the TUV CYPRUS LIMITED in Nicosia which has been assessed according to the Accreditation Criteria for Inspection Bodies Type A as defined in the standard CYS EN ISO/IEC 17020:2012 as competent to perform the Inspections defined in the Scope of Accreditation referred to in the Annex of this certificate; the said Annex represents inextricable part of the certificate. The Accreditation Scope can only be modified after a decision of the Cyprus Accreditation Body. The current Accreditation Certificate, no. IB 002-2, is issued on the 28 th July 2017 and is valid till the 12 th May Accreditation was granted for the first time on the 13 th of May Antonis Ioannou Director CYS-CYSAB Date: 28 th July 2017
2 Annex of the Accreditation Certificate no. IB SCOPE OF ACCREDITATION for TUV CYPRUS LIMITED as an Inspection Body Type A for Lifts. Valid from 13 May 2017 until 12 May Field of Inspection Type of Inspection Normative Regulations / Standards / In house procedures Lifts Directive 2014/33/EU R.A.A 309/2016 EN 81-1:1998+A3:2009 EN 81-2:1998+A3:2009 EN 81-20:2014 EN 81-21:2009+A1:2012 EN 81-22:2014 EN 81-50:2014 EN 81-58:2003 EN 81-70:2003 EN 81-70:2003/A1: 2004 EN 81-71:2005+A1:2006 EN 81-72:2003 EN 81-72:2015 EN 81-77:2013 -Type examination for lifts Annex IVB (Module B) -Final inspection for lifts Annex V -Conformity based on unit Annex VIII (Module G) verification for lifts Lifts Safety Components -EU-Type examination of safety components for lifts -Conformity to type with random checking for safety components for lifts Annex IVA (Module B) Annex IX (Module C2) Lifts Periodic Inspection R.A.A. 533/2012 R.A.A. 323/2013 p. 1/15
3 Authorised persons to sign the certificates issued by TUV CYPRUS LIMITED are the auditor / inspector who executes the inspection of the product, and a member of the management. The list with the authorized persons to sign the certificates: LIFTS Νο. 1 st signature Νο. 2 nd signature Auditor/inspector Management For inspections of Lifts according to the Directive 2014/33/EU 1 Louis Vakanas 1 Demos Demosthenous - Managing Director 2 George Zevlaris 2 Antonis Karyotis - Technical 3 George Nikolaides 3 Christos Serafim Deputy Technical 4 Kyriacos Kodjapashis 4 Sofia Andreou - Deputy Technical 5 Christos Serafim 6 George Tsagodimitropoulos 7 Sofia Andreou 8 Demetris Kodjapashis 9 Antonis Karyotis 10 Konstantinos Vamvakopoulos For periodic inspection of Lifts 1 Kyriacos Kodjapashis 1 Demos Demosthenous - Managing Director 2 Fotos Mavrommatis 2 Antonis Karyotis - Technical 3 Christos Serafim 4 Alexis Filippou 5 Demetris Kodjapashis 6 George Tsagodimitropoulos 7 George Zevlaris 8 George Nikolaides 9 Antonis Karyotis Address of the Body : Papaflessa, 2, 2235 Latsia, Nicosia, Cyprus p. 2/15
4 Annex of the Accreditation Certificate no. IB SCOPE OF ACCREDITATION for TUV CYPRUS LIMITED as an Inspection Body Type A for Transportable pressure equipment: Valid from 13 May 2017 until 12 May Field of Inspection Type of Inspection Normative Regulations / Standards / In house procedures Transportable pressure equipment Directive 2010/35/EU Law.17(Ι)/2012 R.A.A. 146/2012 ADR (valid issue) Agreement CYS EN 12972:2007 -Pressure receptacles, including their valves and other accessories when appropriate, as covered in Chapter 6.2 of the ADR (valid issue) Agreement and the Annexes of the Directive 2008/68/EC Tanks, battery vehicles/wagons, multipleelement gas containers (MEGCs), their valves and other accessories when appropriate, as covered in the Chapter 6.8 of the ADR (valid issue) Agreement and the annexes of the Directive 2008/68/ΕΚ. -Conformity assessment activities -Exceptional checks -Intermediate inspections -Periodic inspections -Reassessment of conformity Section I.1 of Annex I, Section ΙI.1 of Annex IΙ, Section IΙΙ.1 of Annex IΙΙ, of Directive 2008/68/ΕC Annex III of Directive 2010/35/EU Section I.1 of Annex I, Section II.1 of Annex II, and Section III.1 of Annex III to Directive 2008/68/EC Annex III to Directive 2010/35/EU p. 3/15
5 Authorised persons to sign the certificates issued by TUV CYPRUS LIMITED are the auditor / inspector who executes the inspection of the product, and a member of the management. The list with the authorized persons to sign the certificates: TRANSPORTABLE PRESSURE EQUIPMENT Νο. 1 st signature Νο. 2 nd signature Auditor/inspector Management 1 Costas Agelakos 1 Demos Demosthenous - Managing Director 2 George Nikolaides 2 George Nikolaides Technical 3 Christos Zachariades 1 3 Antonis Karyotis - Deputy Technical 4 Nicos Polydorides 5 Konstantinos Vamvakopoulos 6 Antonis Karyotis 1 1 Only for the chapter 6.2 of the ADR agreement Address of the Body : Papaflessa, 2, 2235 Latsia, Nicosia, Cyprus p. 4/15
6 Annex of the Accreditation Certificate no. IB SCOPE OF ACCREDITATION for TUV CYPRUS LIMITED as an Inspection Body Type A for Lifting Equipment: Valid from 13 May 2017 until 12 May Field of Inspection Type of Inspection Normative Regulations / Standards / In house procedures Lifting Equipment Initial Inspection (type ΑΑ) and Periodic Inspection (type Α & Β) M.D /593 (GG 1186/8/2003) Regulation of Lifting Equipment Inspection PD 57/2010 (GG 97/Α/ ) PD 377/93 (GG 160/Α/1993) PD 18/96 (GG 12/Α/1996) PD 394/94 (GG 220/Α/94) PD 89/99 (GG 94/Α/1999) PD 70/90(GG 31/Α/90,Art.59) 1. Cranes operating near sea, such as in shipping construction and cranes for port services 2. Cranes used in steel industry or in other plants that transport dangerous products, cranes with lifting capacity equal or more than 2 tn. 3. Cranes used in steel industry or in other plants that transport dangerous products, cranes with lifting capacity less than 2 tn. 4. Bridge cranes with lifting capacity equal or more than 5 tn. 5. Bridge cranes with lifting capacity less than 5 tn. -High risk Υ1, -High risk Υ1, -DIN 15018:PART 3 -High risk Υ2, -High risk Υ1, -High risk Υ2, p. 5/15
7 6. Tower cranes for buildings 7. Small cranes of constructions up to 250Kg 8. Vehicle lifting platforms with vertical height of more than 4m. 9. Fixed jib cranes and fixed mast cranes with lifting capacity more than 2 tn. 10. Fixed jib cranes and fixed mast cranes with lifting capacity less than 2 tn 11. Lift machinery for which exists a risk of falling for user or other worker from a vertical height of more than 3m. 12. Lifting machinery as mobile cranes, mobile basket cranes, Cranesexcavators, Bridge cranes 13. Lifting platforms for house appliances, lifting equipment on aircrafts 14. Lifts of handicapped people in airplane, mobile elevators of work platforms -High risk Υ1, -Low risk -High risk Υ1, -High risk Υ1, -High risk Υ2, -High risk Υ2, -EN 81-40:2004 -EN 81-41:2004 -High risk Y2, -DIN 15018: PART 1,2 -DIN 15018: PART 3 -High risk Y2, -EN EN 81-40:2004 -EN 81-41:2004 -Low risk -DIN 15018: PART 1,2 -DIN 15018: PART Concrete pumps -Medium risk -ELOT EN Fork lifts -Medium risk p. 6/15
8 -ISO Vehicles lifting platforms up to 4m 18. Cranes for collecting vehicles 19. Manually controlled lifting cranes more than 100 kg -Medium risk -Low risk -ELOT EN Low risk -DIN 15018:PART Stable lifting platforms -Low risk -ΕΝ Hydraulic devices with scissor lifting platforms with lifting capacity more than 200kg -Low risk p. 7/15
9 Authorised persons to sign the certificates issued by TUV CYPRUS LIMITED are the auditor / inspector who executes the inspection of the product, and a member of the management. The list with the authorized persons to sign the certificates: LIFTING EQUIPMENT Νο. 1 st signature Νο. 2 nd signature Auditor/inspector Management 1 George Nikolaides 1 Demos Demosthenous Managing Director 2 George Tsagodimitropoulos 2 Antonis Karyotis - Technical 3 Kyriacos Kodjapashis 3 George Nikolaides Deputy Technical 4 Antonis Karyotis 4 Christos Serafeim - Deputy Technical 5 George Zevlaris 6 Christos Loizou 7 Konstantinos Vamvakopoulos 8 Michalis Parmaklis 9 Simos Kokkinis 10 Photos Mavrommatis 11 Alexios Philippou 12 Christos Serafeim Address of the Body : Papaflessa, 2, 2235 Latsia, Nicosia, Cyprus p. 8/15
10 Annex of the Accreditation Certificate no. IB SCOPE OF ACCREDITATION for TUV CYPRUS LIMITED as an Inspection Body Type A for Machinery Directive: Valid from 13 May 2017 until 12 May Field of Inspection Type of Inspection Normative Regulations / Machinery or Partly completed machinery listed in ANNEX IV Category 9. Presses, including press-brakes, for the cold working of metals, with manual loading and/or unloading, whose movable working parts may have a travel exceeding 6 mm and a speed exceeding 30 mm/s.) Category 10. Injection or compression plasticsmoulding machinery with manual loading or unloading. Standards / In house procedures Machinery Directive 2006/42/EC Relevant standards as listed in the attached Official Journal of EU (2016/C 332/01) Category 11. Injection or compression rubbermoulding machinery with manual loading or unloading. Category 13. Manually loaded trucks for the collection of household refuse incorporating a compression mechanism. p. 9/15
11 Category 14. Removable mechanical transmission devices including their guards. Category 15. Guards for removable mechanical transmission devices. 16. Vehicle servicing lifts. Category 17. Devices for the lifting of persons or of persons and goods involving a hazard of falling from a vertical height of more than three metres. Category 18. Portable cartridge-operated fixing and other impact machinery. Category 19. Protective devices designed to detect the presence of persons. Category 20. Poweroperated interlocking movable guards designed to be used as safeguards in machinery referred to in points 9, 10 and 11.) Category 21. Logic units to ensure safety functions. ISO/IEC17020 ISO/IEC17065 Πλήρης διασφάλιση ποιότητας () ISO/IEC17020 ISO/IEC17065 Non Harmonised Standards EN :2010 p. 10/15
12 Category 22. Roll-over protective structures (ROPS) Category 23. Fallingobject protective structures (FOPS). Μachinery or partly completed machinery not listed in annex IV Declaration of incorporation - voluntary verification Production quality assurance - voluntary verification, based on Assessment of conformity with checks on manufacture, according to Annex VIII Issue of Acknowledge of receipt of the technical files - voluntary verification (written in accordance to Annex VII) EN :2010 EN :2010 EN :2010 EN :2010 EN :2010 EN :2010 IEC :2016 IEC :2016 IEC :2016 IEC TS :2009 IEC :2010 IEC TR :2015 IEC :2015 IEC :2015/COR1:2015 IEC TR :2009 IEC :2013 IEC :2013/COR1:2014 Non Harmonised Standards Μη εναρμονισμένα πρότυπα EN :2010 EN :2010 EN :2010 EN :2010 EN :2010 EN :2010 EN :2010 IEC :2016 IEC :2016 IEC :2016 IEC TS :2009 IEC :2010 IEC TR :2015 IEC :2015 IEC :2015/COR1:2015 IEC TR :2009 IEC :2013 p. 11/15
13 IEC :2013/COR1:2014 EN 746-1:1997+A1:2009 EN 746-2:2010 EN 746-3:1997+A1:2009 p. 12/15
14 Authorised persons to sign the certificates issued by TUV CYPRUS LIMITED are the auditor / inspector who executes the inspection of the product, and a member of the management. The list with the authorized persons to sign the certificates: MACHINERY DIRECTIVE Νο. 1 st signature Νο. 2 nd signature Auditor/inspector Management 1 George Nikolaides 2 Antonis Karyotis 1 Demos Demosthenous Managing Director 3 George Tsagpdimitropoulos 2 Antonis Karyotis Deputy Technical 4 Konstantinos Cheimonides 3 George Nikolaides Technical 5 Marco Ghisu 4 Sofia Andreou Deputy Quality 6 Alessio Ragni 5 Marco Ghisu Deputy Technical 7 Peter Thor Lauritzen 8 Christos Serafeim 1 Demos Demosthenous Managing Director 9 Christos Zachariades 2 George Nikolaides Technical 10 Konstantinos Vamvakopoulos 3 Marco Ghisou Deputy Technical 11 Dimitris Gournakis 4 Sofia Andreou Deputy Quality 12 Sotiris Pantos Address of the Body : Papaflessa, 2, 2235 Latsia, Nicosia, Cyprus p. 13/15
15 Annex Of the Accreditation Certificate no. IB 002 SCOPE OF ACCREDITATION FOR TUV CYPRUS LIMITED As an Inspection Body type A for the Directive ΑΤΕΧ 137: *Valid from 28 July 2017 until 12 May 2021 Field of Inspection Type of Inspection Normative Regulations / *Minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres Classification of areas to zones regarding the creating of explosive atmosphere from gases or/and dusts. Inspection of installation and maintenance of electrical equipment in areas with explosive atmospheres Initial Periodical Sampling Continuous supervision Certification for repair, restoration and upgrading of equipment in areas with explosive atmospheres Initial Periodical Sampling Continuous supervision Standards / In house procedures Directive ΑΤΕΧ /92/ΕC P.I. 291/2002 IECEx Guides & Rules IEC : 2015 IEC : 2015 IEC : 2013/COR1 :2016 IEC :2013 IEC :2010/AMD1 :2015 p. 14/15
16 Authorized persons to sign the certificates issued buy TUV CYPRUS LIMITED, are auditors / inspector who executes the inspection, and a member of management. The list with the authorized persons to sign the certificates: Directive ΑΤΕΧ 137 Α/Α 1 st signature Α/Α 2 nd signature Auditor/Inspector Management 1 Marco Ghisu 1 Demos Demosthenous Managing Director 2 George Nikolaides 2 George Nikolaides Technical 3 Christos Zachariades 3 Antonis Kariotis - Αναπληρωτής Τεχνικός Διευθυντής 4 Konstantinos Chimonides 4 Marco Ghisu 5 George Tsagodimitropoulos 5 Sofia Andreou Deputy Quality 6 Paolo Pancaldi 7 Efstratios Komis 8 Marco Molina 9 Isabella D'Anna 10 Peter Thor Lauritzen 11 Alessio Ragni 12 Odisseas Stempiles 13 Vito Giampietro Date: 28 th July 2017 Antonis Ioannou Director CYS-CYSAB p. 15/15
Annex of the Certificate (Page 1/7) Scope of Accreditation
Annex of the Certificate (Page 1/7) Scope of Accreditation As a "Type A" Inspection Body Address : Şerifali Mah. Açıkyüz Sok. No:2-3 Ümraniye 34775 İSTANBUL/TÜRKİYE Phone : 0 216 313 14 20 Fax : 0 216
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 17065:2012 to provide product conformity certification Newport Business Park New Port Road Ellesmere Port CH65 4LZ United Kingdom Contact:
More informationThe Machinery Directive 2006/42/EC
The Machinery Directive 2006/42/EC Aims of the Machinery Directive To ensure the free movement of machinery on the EU market whether manufactured in the EU or imported To ensure a high level of protection
More informationAPPLICATION FOR THE CERTIFICATION/ ASSESSMENT OF A MANAGEMENT SYSTEM C C C
C C C CYPRUS CERTIFICATION COMPANY Α. COMPANY INFORMATION COMPANY NAME: (in Greek) (in English)......... Company Registration Number:.... COMPANY ADDRESS: (in Greek).... (in English)..... CITY: Post Code:..
More informationZakres notyfikacji UE dla IMQ. IMQ ISTITUTO ITALIANO DEL MARCHIO DI QUALITÀ S.P.A. Via Quintiliano, MILANO Country : Italy
http://ec.europa.eu/enterprise/newapproach/nando/index.cfm?fuseaction=notifiedbody.notifiedbody&refe_cd= EPOS_43373&version_no=20&lst_version_no=20,9,8,7,6,5,4,3,2,,0,9,8,7,6,5,4,3,2,&max_ver sion=20&history_flg=y
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Chatsworth Technology Park Dunston Road Chesterfield Derbyshire S41 8XA Contact: Mr M Watson Tel: +44 (0)1246 263861 Fax: +44 (0)1246 260919
More informationFact File 78. Portable Fire Extinguishers under the ADR. Note: This Fact File supersedes Fact File 060 which is withdrawn
Fact File 78 Portable Fire Extinguishers under the ADR Note: This Fact File supersedes Fact File 060 which is withdrawn The European Agreement concerning the International Carriage of Dangerous Goods by
More informationCO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE
CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 PPE-R/00.017 Version 2 RECOMMENDATION FOR USE Number of pages: 5 Approval stage : Approved on : Origin : Horizontal Committee, C2D Ad hoc group
More informationSUPPLEMENTARY REGULATIONS SPECIFIC TO CERTIFICATION OF PERSONAL PROTECTIVE EQUIPMENT (PPE)
SUPPLEMENTARY REGULATIONS SPECIFIC TO CERTIFICATION OF PERSONAL PROTECTIVE EQUIPMENT (PPE) SCS/SF/053-8 Issue 1 Sira Certification Service INTRODUCTION One of the conditions placed on all holders of Sira
More informationMARKING EC Directive 97/23 PED (Pressure Equipment Directive)
MARKING EC Directive 97/23 PED (Pressure Equipment Directive) Field of application The Directive applies to the design, manufacturing and conformity assessment of the pressure equipment and of their groups
More informationEUROPUMP ATEX Guideline Part II
EUROPEAN ASSOCIATION OF PUMP MANUFACTURERS ASSOCIATION EUROPÉENNE DES CONSTRUCTEURS DE POMPES EUROPÄISCHE VEREINIGUNG DER PUMPENHERSTELLER EUROPUMP ATEX Guideline Part II Application of the EC-Guidelines
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 072A Issue date 23 rd March 2018 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44
More informationCE Marking and Technical Standardisation
EDITION 3.0 CE Marking and A G A M B I C A T E C H N I C A L G U I D E Technical Standardisation Guidelines for application to Electrical Power Drive Systems CE Marking and Technical Standardisation Guidelines
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK Accredited to ISO/IEC 17065:2012 to provide product conformity certification Wonersh House The Guildway Old Portsmouth Road Guildford Surrey
More informationDo you manufacture equipment or protective systems for use in potentially explosive atmospheres? Do you process, trade or import them?
TÜV NORD CERT GmbH Geschäftsstelle Hannover Am TÜV 1 30519 Hannover Zertifizierung Certification body for equipment according to Directive 94/9/EC of TÜV NORD CERT GmbH Summarized Information Directive
More informationFlexible Schedule of Accreditation. SIRA CERTIFICATION SERVICE Unit 6, Hawarden Industrial Park, Hawarden, CH5 3US.
Flexible Schedule of Accreditation SIRA CERTIFICATION SERVICE. Issue No: 63A Issue date 16 th June 2015 Unit 6 Hawarden Industrial Park Hawarden, CH5 3US, United Kingdom Contact: Mr A Myler Tel: +44 (0)1244
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 17065:2012 to provide product conformity certification Unit 16-18 Abenbury Way Wrexham Industrial Estate Wrexham LL13 9UZ United Kingdom Contact:
More informationReconciliation table Equipment (Public Safety) Regulations
Reconciliation table Equipment (Public Safety) Regulations July 2016 This reconciliation table provides a comparison between the regulatory provisions current Equipment (Public Safety) Regulations 2007
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK SIRA Certification Service Accredited to ISO/IEC 17065:2012 to provide product conformity Unit 6 Hawarden Industrial Park Hawarden Deeside
More informationISO INTERNATIONAL STANDARD. Mobile elevating work platforms Design, calculations, safety requirements and test methods
INTERNATIONAL STANDARD ISO 16368 Second edition 2010-05-15 Mobile elevating work platforms Design, calculations, safety requirements and test methods Plates-formes élévatrices mobiles de personnel Conception,
More informationCEN standardization work on refrigerating systems, especially standard EN 378
CEN standardization work on refrigerating systems, especially standard EN 378 Carsten Hoch Head of Refrigeration TÜV SÜD Industrie Service GmbH Ridlerstrasse 65, 80339 Munich carsten.hoch@tuev-sued.de
More informationAnnex of the Certificate (Page 1/4) Scope of Accreditation
Annex of the Certificate (Page 1/4) As a "Type A" Inspection Body Address : İçerenköy Mah. Umut Sk. E5 Yanyol Üzeri AND Binası No:12 İç Kapı No :4 Ataşehir/ 34752 İSTANBUL/TÜRKİYE Phone : 0 216 651 08
More informationAnnex to declaration of accreditation (scope of accreditation) Normative document: EN ISO/IEC 17065:2012 Registration number: C 001
This annex is valid from: 22-11-2017 to 01-05-2018 Replaces annex dated: 03-11-2017 Voluntary suspension for the crossed out activities as 03-11-2017 Meander 1051 6825 MJ Arnhem The Netherlands Location(s)
More informationPressure Equipment Directive PED 2014/68/EU Commission's Working Group "Pressure"
D. EVALUATION ASSESSMENT PROCEDURES Guideline D-01 Guideline related to: Annex III, module G Is design approval by a notified body required under module G? Module G does not explicitly require formal design
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Edisonstraat 12A 6902 PK Zevenaar The Netherlands Location Certification Scheme Edisonstraat 12A 6902 PK Zevenaar The Netherlands
More informationThis annex is valid from: to Replaces annex dated: Imposed suspension for the crossed out activities as of
Annex to declaration accreditation (scope accreditation) This annex is valid from: 03-05-2018 to 01-05-2022 Replaces annex dated: 12-04-2018 Imposed suspension for the crossed out activities as 03-05-2018
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Issue No: 007 Issue date: 16 February 2018 Level 2 5 Harbour Exchange Square London E14 9GE Contact: Owen Bian Tel: +44 (0)20 7868 1509 E-Mail: info@ccqs.co.uk Website: www.ccqs.co.uk Inspection performed
More informationRENAR Accreditation Activities
RENAR accreditation activities represent the scopes where RENAR has competence to provide accreditation services. RENAR defined its accreditation activities in accordance with the EA MLA scope (EA multilateral
More informationValve Manufacturers Association of America
BUSINESS ASSURANCE Valve Manufacturers Association of America 2016 Technical Seminar: EU s New Legislation Framework (NLF) - What this means to you. Mike Norman 1 VMA Technical Session - March 2016 SAFER,
More informationRADAR REFLECTOR STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:
STANDARD FOR CERTIFICATION No. 2.9 RADAR REFLECTOR JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent Foundation with
More informationThis annex is valid from: to Replaces annex dated: Location(s) where activities are performed under accreditation
Location(s) where activities are performed under accreditation Head Office Edisonstraat 12A 6902 PK Zevenaar The Netherlands Activities trading under the names and Kiwa Telefication Fire alarm/detection
More information1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres?
QUESTIONS TO REGULATORS 1. Which national directives/laws control the placing on the market of equipment for explosive atmospheres? Note: This answer only relates to coal mining in the state of New South
More informationRULEBOOK ON ELECTROMAGNETIC COMPATIBILITY
RULEBOOK ON ELECTROMAGNETIC COMPATIBILITY ("Official Gazette of RS, issue No. 13/2010) I INTRODUCTION Scope Article 1 This Rulebook stipulates the essential requirements that shall be met with regard to
More informationThe European Radio Equipment Directive 2014/53/EU
TÜV SÜD Slide 1 The European Radio Equipment Directive 2014/53/EU 28 March 2017 Meet the speaker behind the voice Jon Lea Senior Engineer (Product Certification), TÜV SÜD 30 years experience in the testing
More informationGuidelines Cooperation between authorities under Articles 17 and 23 of Regulation (EU) No 909/2014
Guidelines Cooperation between authorities under Articles 17 and 23 of Regulation (EU) No 909/2014 11 July 2017 ESMA70-151-435 Table of Contents 1 Scope... 3 2 Purpose... 5 3 Compliance and reporting obligations...
More informationDeutsche Akkreditierungsstelle GmbH. Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-11321-01-00 according to DIN EN ISO/IEC 17065:2013 Period of validity: 09.02.2018 to 08.02.2023 Holder of certificate: TÜV
More informationGuidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU
GNB-CPR AG Guidance from the Group of Notified Bodies for the Construction Products Regulation 305/2011/EU NB-CPR/AG/03/002r3 Issued: 24 May 2013 APPROVED GUIDANCE GNB-CPR AG position paper Guidance to
More informationMARINE GYRO COMPASS STANDARD FOR CERTIFICATION. DET NORSKE VERITAS Veritasveien 1, N-1322 Høvik, Norway Tel.: Fax:
STANDARD FOR CERTIFICATION No. 2.9 MARINE GYRO COMPASS JANUARY 2003 Veritasveien 1, N-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD is an autonomous and independent Foundation
More informationAnnex of the certificate (Page 1/1) Accreditation Scope
Accreditation Nr: ISO 22000:2005 Food Safety Management System Certification Address : E-Mail Website : kys@szutest.com.tr : www.szutest.com.tr Class/Category Food and Feed Processing - C Food and Feed
More informationCompilation of regulatory approaches used in various countries. Information received by the Secretariat through a survey in 2009
Compilation of regulatory approaches used in various countries Information received by the Secretariat through a survey in 2009 At its seventeenth session, the Working Party mandated the Sectoral Initiative
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Accredited to ISO17065:2012 to provide product conformity Octagon House Concorde Way Segensworth North Fareham Hampshire PO15 5RL Contact: Mr Mark Jenkins Tel: +44 (0) 1489 558258 Fax: +44 (0)1489 558101
More informationRecord of Amendments. Version Date Amendment Section/page affected
Industry support for effective compliance BTHA Guidance - The Low Voltage Directive (LVD) Directive 2014/35/EU On the harmonisation of the laws of the Member States relating to the making available on
More informationDIRECTIVE 2014/34/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL
29.3.2014 Official Journal of the European Union L 96/309 DIRECTIVE 2014/34/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 26 February 2014 on the harmonisation of the laws of the Member States relating
More informationOfficial Journal of the European Union. (Non-legislative acts) REGULATIONS
L 146/1 II (Non-legislative acts) REGULATIONS COMMISSION IMPLEMENTING REGULATION (EU) 2016/879 of 2 June 2016 establishing, pursuant to Regulation (EU) No 517/2014 of the European Parliament and of the
More information(1135/2016) Translation from Finnish Legally binding only in Finnish and Swedish Ministry of Economic Affairs and Employment, Finland
Translation from Finnish Legally binding only in Finnish and Swedish Ministry of Economic Affairs and Employment, Finland Electrical Safety Act (1135/2016) By decision of Parliament, the following is enacted:
More informationEXNBG CLARIFICATION/DECISION SHEETS NOTED BY THE ATEX STANDING COMMITTEE STATUS ON DECEMBER 2009
EXNBG CLARIFICATION/DECISION SHEETS NOTED BY THE ATEX STANDING COMMITTEE STATUS ON DECEMBER 2009 Number ExNB/CS/ DS (1) Edition Subject / Keywords 98/06/001 1.0 Certification of a torch according to EN
More information7.3 Design and Development Design and development planning Design and development inputs Design and development outputs 7.3.
Rev. 1 03/05/2015 ANNEX A to the Yokogawa Corporation of America Quality Assurance Manual For Additional Requirements selectively applied to ATEX and IECEx certified products CONTENTS 1. Scope 2. Purpose
More informationTable of Contents for the REGULATION (EU) 2017/745 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 5 April 2017
Chapter I o Scope and definitions Article 1 Subject matter and scope 13 Article 2 Definitions 15 Article 3 Amendment of certain definitions 20 Article 4 Regulatory status of products 20 Chapter II o Making
More informationTraining, Assessment, Consultants for Hazardous & Industrial Areas
Training, Assessment, Consultants for Hazardous & Industrial Areas EPIT provides specialist training, assessment and consultancy services for engineers working in hazardous and industrial environments.
More informationDECLARATION OF PERFORMANCE. No EN
DECLARATION OF PERFORMANCE No. 0079 EN 1. Unique identification code of the product-type: fischer injection system FIS EM 2. Intended use/es: Product Metal anchors for use in concrete (heavyduty type)
More informationMaterials Handling and Intralogistics. Industrial Trucks. In accordance with the Directive Equipment for potentially explosive atmospheres (ATEX)
Materials Handling and Intralogistics Industrial Trucks In accordance with the Directive Equipment for potentially explosive atmospheres (ATEX) LEGAL NOTICE 1 Legal notice The guideline Industrial Trucks
More informationSchedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK
Accredited to ISO17065:2012 to provide product conformity Octagon House Concorde Way Segensworth North Fareham Hampshire PO15 5RL Contact: Mr Mark Jenkins Tel: +44 (0) 1489 558258 Fax: +44 (0)1489 558101
More informationThe PPE Directive and the PPE Regulation
PPE Regulation (EU) 2016/425 The PPE Directive and the PPE Regulation The history and future of PPE Certification A whitepaper The current PPE Directive at a glance The PPE Directive was one of the first
More informationThe Impact of Marking Requirements. on Design and Performance of Power Converters and Electrical Drives
European The Impact of Marking Requirements on Design and Performance of Power Converters and Electrical Drives Harmonization of Standards The Key to the European Market C onfused E urope EN 600204 BS...
More informationCOMMISSION REGULATION (EU)
L 218/2 Official Journal of the European Union 19.8.2010 REGULATIONS COMMISSION REGULATION (EU) No 744/2010 of 18 August 2010 amending Regulation (EC) No 1005/2009 of the European Parliament and of the
More information(Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION
8.4.2016 EN Official Journal of the European Union C 126/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework
More informationSAFETY STANDARDS & SOLUTIONS MATERIAL HANDLING & INTRALOGISTICS
SAFETY STANDARDS & SOLUTIONS MATERIAL HANDLING & INTRALOGISTICS Renaat Mondelaers SICK Certified Functional Safety Application Expert CFSAE by SGS/TÜV Saar Mikaël Degent SICK Product Manager Industrial
More informationGASTEC QA. Evaluation Guideline KE 192. Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment
KE 192 - A1 March 2012 GASTEC QA Evaluation Guideline KE 192 Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment Foreword and introduction These GASTEC QA Approval
More informationTechnical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme:
Technical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme: Solar products and components Accreditation Kiwa Italia S.p.A. Via Treviso 32/34 31020 San Vendemiano (TV) Italia Tel: +39
More informationAnnex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-12007-01-06 according to DIN EN ISO/IEC 17065:2013 Holder of certificate: TÜV NORD CERT GmbH Langemarckstraße 20, 45141 Essen
More informationC 319/6 Official Journal of the European Union
C 319/6 Official Journal of the European Union 5.11.2013 Commission communication in the framework of the implementation of the Directive 94/9/EC of the European Parliament and the Council of 23 March
More informationDECLARATION OF PERFORMANCE. No EN
DECLARATION OF PERFORMANCE No. 0072 EN 1. Unique identification code of the product-type: Injection System fischer FIS V 2. Intended use/es: Product Bonded anchor for use in concrete Intended use/es For
More informationCircuit Breakers JANUARY The electronic pdf version of this document found through is the officially binding version
STANDARD FOR CERTIFICATION No. 2.9 Approval Programmes Type Approval Programmes for EU recognised organisation Mutual Recognition (MR) No. MR-E001 Circuit Breakers JANUARY 2013 The electronic pdf version
More informationThe plant meets the requirements of the current FSS 5 Checklist for Vessel Process Plants
FSS 5, Attachment 3: Safety list - Vessel Process Plants (powered devices, machines and facilities - not including industrial trucks) within Freudenberg Date: 2009-03-30 - Revision: 01 I. Nature of the
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 054/02)
12.2.2016 EN Official Journal of the European Union C 54/9 Commission communication in the framework of the implementation of Regulation (EC) No 765/ 2008 of the European Parliament and of the Council
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2018/C 209/02)
C 209/12 EN Official Journal of the European Union 15.6.2018 Commission communication in the framework of the implementation of Regulation (EC) No 765/ 2008 of the European Parliament and of the Council,
More informationISO INTERNATIONAL STANDARD. Industrial fans Mechanical safety of fans Guarding
INTERNATIONAL STANDARD ISO 12499 First edition 1999-10-15 Industrial fans Mechanical safety of fans Guarding Ventilateurs industriels Sécurité mécanique des ventilateurs Protecteurs A Reference number
More informationThe transition requirements of the new Regulation (EU) 2016/425 of the European Parliament and of the Council on personal protective equipment
expert guide / The transition requirements of the new Regulation (EU) 2016/425 of the European Parliament and of the Council on personal protective equipment www.arco.co.uk contents What you need to know
More informationErik Leider Project Engineer Hazardous Locations, Gas & Oil Underwriters Laboratories
Hazardous Locations: Understanding the Basics of Global Compliance Requirements Erik Leider Project Engineer Hazardous Locations, Gas & Oil Underwriters Laboratories DISCLAIMER/ TERMS OF USE: THE INFORMATION
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 TÜV SÜD CERTIFICATION AND TESTING (CHINA) CO., LTD. 1 SHANGHAI BRANCH 3-13 F No. 151 Heng Tong Road Shanghai, 200 070, People's Republic of China Testing Location:
More informationAnnex A to joint CELMA / ELC Guide on LED related standards: Photobiological safety of LED lamps and lamp systems
Annex A to joint CELMA / ELC Guide on LED related standards: Photobiological safety of LED lamps and lamp systems 1 st Edition, November 2009 www.celma.org www.elcfed.org Document CELMA LED(FR)003A TABLE
More informationBUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY
BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION CEN/TC 305 Business Plan Page: 1 Business environment, benefits and priorities EXECUTIVE SUMMARY CEN/TC 305
More informationOn Electromagnetic Compatibility
TECHNICAL REGULATION On Electromagnetic Compatibility Approved by Resolution of Cabinet of Ministers of Ukraine No. 785 dd. 2009.07.29 ELMAS LTD Index Index...2 General Provisions...3 Essential Requirements...5
More informationNATIONAL RULES FOR ELECTRICAL INSTALLATIONS IN POTENTIALLY EXPLOSIVE ATMOSPHERES. ET 105:2001 (Second Edition)
NATIONAL RULES FOR ELECTRICAL INSTALLATIONS IN POTENTIALLY EXPLOSIVE ATMOSPHERES ET 105:2001 (Second Edition) Consolidated Amendments, Corrigenda and Errata 01/2010 Introduction When ET 105:2001 was originally
More informationBRL-K21030/02 5 August Certification of Alarm Communication. Certification Alarm Transmission Systems (ATS) Alarm Transmission Systems
5 August 2014 Certification of Alarm Communication Certification (ATS) Kiwa N.V. - 1-5 Augustus 2014 Preface This Evaluation Guideline (Certification Scheme) has been accepted by the Kiwa Board of Experts
More informationSound absorption coefficient Equivalent sound absorption area Sound absorption coefficient Sound absorption class
Annex 1 to the Accreditation Certificate No. LA.01.028 issued on 18-12-2015, approved on 18-12-2015 by the Order No. AK-200 of Director of National Accreditation Bureau under the Ministry of 1 (8) pages
More informationATEX - GUIDE. A short introduction to ATEX Terminology. Equipment for use in flammable atmospheres C E R T I F I E D DANISH TECHNOLOGICAL INSTITUTE
DANISH TECHNOLOGICAL INSTITUTE The Danish Technological Institute is a self-owned and not-f-profit institution. We develop, apply and disseminate research- and technologically-based knowledge f the Danish
More informationManual Power relay SR853
Manual Power relay SR853 Product types SR853.8.x.x, Rev. 1 SR853 manual page2 The symbols WARNING, CAUTION, NOTE This symbol warns of a serious hazard. Failure to observe this warning may result in death
More informationShipboard incinerators with capacities up to 4000 kw
STANDARD FOR CERTIFICATION No. 2.9 Approval Programmes Type Approval Programmes for Marine Equipment Directive (MED) No. 431.90 - MED A.1/2.7 Shipboard incinerators with capacities up to 4000 kw JANUARY
More informationHARMONISATION STATUS OF SELECTED ELECTRICAL AND NON-ELECTRICAL Ex STANDARDS MARCH 2018
Harmonisation status of selected electrical and non-electrical ex standards BAS-PS-010 - Issue 1 - March 2018 P. 1 HARMONISATION STATUS OF SELECTED ELECTRICAL AND NON-ELECTRICAL Ex STANDARDS MARCH 2018
More informationCouncil of the European Union Brussels, 25 October 2017 (OR. en) Mr Jeppe TRANHOLM-MIKKELSEN, Secretary-General of the Council of the European Union
Council of the European Union Brussels, 25 October 2017 (OR. en) 13662/17 COVER NOTE From: date of receipt: 20 October 2017 To: No. Cion doc.: TEXT 3 MI 751 ENT 216 CHIMIE 87 ECO 62 CONSOM 332 DELACT 205
More informationRelevance of standards for tractors and agricultural machinery. Antoon Vermeulen, CNH Belgium N.V. June pages
Relevance of standards for tractors and agricultural machinery Antoon Vermeulen, CNH Belgium NV June 2012 12 pages Standards in the legislation of the EU New Approach legislation in the European Union
More informationWorking Document on a possible COMMISSION DELEGATED REGULATION
Working Document on a possible COMMISSION DELEGATED REGULATION Implementing Directive 2010/30/EU of the European Parliament and of the Council with regard to energy labelling of vacuum cleaners EN EN Working
More informationNON ELECTRICAL EQUIPMENT IN HAZARDOUS AREAS
NON ELECTRICAL EQUIPMENT IN HAZARDOUS AREAS The ATEX Directive consists of two EU Directives, ATEX Directive 2014/34/EU and ATEX Directive 99/92/EC. ATEX Directive 2014/34/EU embodies the European minimum
More informationApproval of Ex (Electrical) Equipment for use/installation in Hazardous Areas.
Approval of Ex (Electrical) Equipment for use/installation in Hazardous Areas. Requirement under Rule 102 of the Petroleum Rules, 2002 lays down that no electrical wiring shall be installed and no electrical
More informationATEX GUIDE. A short introduction to ATEX Terminology. Equipment for use in flammable atmospheres. Directive 94/9/EC
Quick Introduction to TÛV Denmark TÜV Denmark - is a part of the TÜV NORD Group a global Organisation f Certification and Inspection of: Quality Management Systems, Products, Processes and Qualification
More informationBritish Standards for Machinery Guarding
British Standards for Machinery Guarding The below provides a list of standards that are relevant to machinery safety. Not all standards are applicable in every case, and there are specific 'Type C' standards
More informationA Notification under Article 12 of Regulation (EU) No 1025/2012 1
EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Sustainable Growth and EU 2020 Standards for Boosting Competitiveness Brussels, 02/07/2014 A Notification under Article 12 of Regulation
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2015/C 335/02)
C 335/10 EN Official Journal of the European Union 9.10.2015 Commission communication in the framework of the implementation of Directive 94/9/EC of the European Parliament and of the Council of 23 March
More informationAUGUST 2016 CONTENTS:
EMC SERVICES NEWSLETTER AUGUST 2016 CONTENTS: RECENT STANDARD CHANGES NEW FCC REGULATIONS IEC 60601-1-2 4TH EDITION LOW VOLTAGE DIRECTIVE EU DIRECTIVES EMC DIRECTIVE 2014/30/EU KOREA UPDATE: KN32/35 1.
More informationEMIRATES CONFORMITY ASSESSMENT SCHEME (ECAS): ECASEx COMPLIANCE
APPLICANTS AND MANUFACTURERS GUIDANCE EMIRATES CONFORMITY ASSESSMENT SCHEME (ECAS): COMPLIANCE intertek.com/ecas CONTENTS Executive Summary 3 Program Scope 4 Manufacturers Responsibilities 6 Application
More information(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2016/C 126/02)
8.4.2016 EN Official Journal of the European Union C 126/13 Commission communication in the framework of the implementation of Directive 2014/34/EU of the European Parliament and of the Council on the
More informationSIMPLIFIED VOYAGE DATA RECORDER (S-VDR)
STANDARD FOR CERTIFICATION No. 2.9 SIMPLIFIED VOYAGE DATA RECORDER (S-VDR) APRIL 2009 Veritasveien 1, NO-1322 Høvik, Norway Tel.: +47 67 57 99 00 Fax: +47 67 57 99 11 FOREWORD (DNV) is an autonomous and
More informationOverview of Emerging Safety Standards Machinery Sector By Phill Carroll Business Development Manager Topics Historical Situation Introduction of New Standards Terminology Safety Integrity identification
More informationAS/NZS :2014
AS/NZS 4024.1601:2014 (EN 953:1997 inc A1:2009, IDT) Australian/New Zealand Standard Safety of machinery Part 1601: Design of controls, interlocks and guarding Guards General requirements for the design
More informationRecord of Amendments. Version Date Amendment Section/page affected
Industry support for effective compliance BTHA Guidance on The Restriction Of The Use Of Certain Hazardous Substances In Electrical and Electronic Equipment (recast) (RoHS) Directive 2011/65/EU Comparison
More informationFederal Law of the Russian Federation of December 27, 2009 N 347-FZ "Technical regulation on safety of low-voltage equipment" Part I
Сближение ЕС и РФ в области технического регулированияь стандардизации и систем сертификации» АФНОР/ДИН/БСИ/СВЕДАК Контракт н. 2009/214-140 Проект финансируется Европейским Союзом Approximation of EU and
More informationGovernment Gazette Staatskoerant
Government Gazette Staatskoerant REPUBLIC OF SOUTH AFRICA REPUBLIEK VAN SUID AFRIKA Regulation Gazette No. 10177 10701 Regulasiekoerant Regulation Gazette Vol. 621 24 March Maart 2017 No. 40713 PART 1
More informationATEX - GUIDE. A short introduction to ATEX Terminology. Equipment for use in flammable atmospheres
Quick Introduction to: DANISH TECHNOLOGICAL INSTITUTE The Danish Technological Institute is a self-owned and not-fprofit institution. We develop, apply and disseminate research- and technologically-based
More information(Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION
8.9.2017 EN Official Journal of the European Union C 298/1 IV (Notices) NOTICES FROM EUROPEAN UNION INSTITUTIONS, BODIES, OFFICES AND AGENCIES EUROPEAN COMMISSION Commission communication in the framework
More information