Draft Minutes. Meeting held on Chairman : Alain Goy CEN/TC 282. «Installation and equipment for LNG» Date: Doc.

Size: px
Start display at page:

Download "Draft Minutes. Meeting held on Chairman : Alain Goy CEN/TC 282. «Installation and equipment for LNG» Date: Doc."

Transcription

1 «Installation and equipment for LNG» CEN/TC 282 Date: Doc. Number: N451 Assistant: Amelle Mouradi Direct line: + 33 (0) Amelle.mouradi@afnor.org Your contact: Joanna Laurent Direct line : + 33 (0) joanna.laurent@afnor.org Draft Minutes Meeting held on Chairman : Alain Goy Association Française de Normalisation 11, rue Francis de Préssensé F La Plaine Saint Denis cedex SIRET NORMA F 0275 màj:

2 Reminding of the agenda: 1 Welcoming and opening of the meeting (10.00) 2 Roll call of delegates 3 Adoption of the agenda CEN/TC 282 N Appointment of the decision committee 5 Approval of the report of previous meeting and follow-up of actions CEN/TC 282 N Report of the Secretary and/or the Chairman CEN/TC 282 N 7 Report of the Convenors of the Technical Committee Working Groups: 7.1 WG 2 Design of onshore installations over 200t (WI ) V. Chrz CEN/TC 282 N 7.2 WG 5 Design of onshore installations (rev EN 1473 WI ) D. Acheroy 7.3 EN ISO (rev EN WI ) Follow-up of the parallel CEN Enquiry and ISO DIS 7.4 EN ISO (rev EN 1160:1996 WI ) Follow-up of the parallel CEN Enquiry and ISO DIS 7.5 Conclusions of these reports and actions to be taken 8 Items for future work 8.1 Metering and measuring (testing) of LNG [D2/2012 R. Roue] CEN/TC 282 N 8.2 Floating Storage Regasification Unit (FSRU) [D2/2012 D. Acheroy] CEN/TC 282 N 8.3 Other items related to the Business plan. 9 Systematic review 9.1 EN :2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Par CEN/TC 282 N 446 Design and testing of transfer hoses 9.2 EN :2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Par Offshore transfer systems 10 Environmental aspects inputs in the guide for sector forum gas infrastructure CEN/TC 282 N 450 CEN/TC 282 N 440& Report from internal and external liaison 11.1 CEN/TC 12 Materials, equipment and offshore structures for petroleum, petrochemical CEN/TC 282 N 444 and natural gas industries 11.2 CEN/TC 265 Site built metallic tanks for the storage of liquids CEN/TC 282 N 11.3 CEN/TC 268 Cryogenic vessels CEN/TC 282 N ISO/TC 67/WG 10 Materials, equipment and offshore structures for petroleum, CEN/TC 282 N 444 petrochemical and natural gas industries / Liquefied Natural Gas (LNG) installations and equipment - Liaison officer : Roger Roue/Christian Brissard 11.5 ISO/TC 28/SC 5 Measurement of refrigerated hydrocarbon and non-petroleum based CEN/TC 282 N 444 liquefied gaseous fuels - Liaison officer : Dominique Ingrain/Michio Doi 11.6 SIGTTO Liaison officer : Roger Roue CEN/TC 282 N 11.7 CEN/TC 408 Natural gas and biomethane for use in transport and biomethane for injection in the natural gas grid - Liaison officer: Jacques Dubost 11.8 ISO/PC 252 Natural gas fuelling stations for vehicles- Liaison officer: Vaclav Chrz 11.9 Discussions/decision to be taken on existing/further liaisons CEN/TC 282 N 12 Preparation of the next meeting (date, venue, home work) 13 Any other business 14 Approval of the decisions 15 Closure of the meeting (17.30) 1 Welcoming and opening of the meeting (10.00) The Chairman, Alain Goy and the secretary welcomed the participants and opened the 22nd meeting of CEN/TC 282. The Chairman introduced the new secretary of CEN/TC282 Joanna Laurent who has taken over the responsibility from Charles-Pierre Bazin de Caix. The Chairman thanked AFNOR for hosting the meeting and expressed his positive feelings about the interest and attractivity of CEN/TC 282 and the new participation to meeting. Association Française de Normalisation 11, rue Francis de Préssensé F La Plaine Saint Denis cedex SIRET NORMA F 0275 màj:

3 2 Roll call of delegates The participants introduced themselves. For the attendance list, see in Annex A of these minutes. 3 Adoption of the agenda The agenda was approved with one modification: The title of the project WI should be updated as follows: - Installation and equipment for LNG - Design of onshore installations with a storage capacity more than 200 t LNG at pressures higher than 0,5 bar 4 Appointment of the resolution committee The resolution committee was composed of: Jarno Dakhorst (Netherlands), Jacques Dubost (France), the Chairman and the secretary. 5 Approval of the report of previous meeting and follow-up of actions The minutes of the previous meeting (Paris FR October 2012) were approved with one modification: the title of the project WI should be updated as follows: Installation and equipment for LNG - Design of onshore installations with a storage capacity more than 200 t LNG at pressures higher than 0,5 bar All the resolutions from the previous meeting were followed in actions. See the slide 4&5 of Annex B. 6 Report of the Secretary/Chairman including the revision of the Business Plan The Secretary reported on the activities since last year Paris meeting (see the slides 6-8 of Annex B). Regarding the current work on LNG in CEN/TC408 Natural gas and biomethane for use in transport and biomethane for injection in the natural gas grid (see slide 8 of Annex B), it was mentioned by the liaison officer, Mr Jacques Dubost, that 2 draft standards were being prepared by CEN/TC408 with regards to LNG. Following these works the scope of TC408 was extended by addition of LNG as fuel. The main discussion concerned the quality of gaz as there is an existing conflict between the requirements of automotive industry and capacity of gaz industry. The agreement was found at TC408 level and new standards are being prepared which should be proposed afterwards at ISO. 7 Report of the leaders of the Project Committee Expert Groups: 7.1 WG2 Design of onshore installations over 200t at pressures higher than 0,5 bar (WI ) V. Chrz Vaclav Chrz has reported on the progress on WG 2 activities (documents, meetings...). Please see in Annex C the presentation prepared by Vaclav Chrz. Association Française de Normalisation 11, rue Francis de Préssensé F La Plaine Saint Denis cedex SIRET NORMA F 0275 màj:

4 With regards to the progress of WI , it was mentioned that the work continues and the next meeting of WG2 is expected in February After this date, the draft should be ready for the decision to activate the project in the work programme of CEN/TC282. The decision if a 2 months ballot can be launched within TC282 will be taken during a next webinar meeting in April See Decision 2/2013. DECISION 2/2013 taken by CEN/TC 282 on Subject: CEN/TC 282 PWI WI Design of installations storing LNG at pressures over 500 mbar CEN/TC 282 Installation and equipment for LNG, decides that: WG 2 Design of onshore installations continues its work on finalization of a new work Item WI During a next webex meeting in April 2014 of CEN/TC282 the decision will be made to launch a 2 months ballot confirming if the new work item can be activated. The decision was taken by unanimity. Secretariat s note after the meeting: The title of the project WI has been modified as per information supplied by the convenor. This modification will be performed within CEN database at the moment of work item activation. The correct title is: Installation and equipment for LNG - Design of onshore installations with a storage capacity more than 200 t LNG at pressures higher than 0,5 bar 7.2 WG5 Revision of EN 1473 In Annex D slide 2, you will find a presentation prepared by Mr Daniel Acheroy (who was not able to be present at the meeting) regarding the principal modifications performed in the project EN 1473 revision. As per information supplied by the convenor, the draft was finalized in July 2013 by WG5. The secretary displayed the finalized draft and the following questions/comments were raised with regards to satellite plants: 1. A proposal of slight modification within the scope : Satellite plants and LNG installations with storage pressure above 0,5 bar are excluded from this European Standard. These plants with storage capacity between 5 and 200 t are covered by EN whilst storage capacity above 200 t will be covered by the pren xxxx. 2. The question was raised if satellite plants have been excluded from the pren WG5 was requested to prepare a list of installations not covered by pren1473 The secretary informed that the deadline date to provide the final draft for CEN Enquiry to CEN Management Center is 16 th of January Therefore all raised questions must be clarified before this date. See decision 3/2013. DECISION 3/2013 taken by CEN/TC 282 on Subject: CEN/TC 282 pren1473 (WI ) Design of onshore installations CEN/TC 282 Installation and equipment for LNG, decides to: Send the finalized pren1473 for CEN enquiry after clarification with Daniel Acheroy satellite plants questions raised during a meeting. The decision was taken by unanimity. Association Française de Normalisation 11, rue Francis de Préssensé F La Plaine Saint Denis cedex SIRET NORMA F 0275 màj:

5 Secretariat s note after the meeting: After the meeting, a consultation was launched to CEN/TC282 for new version of the scope. The final approved scope s version was circulated in the doc. N and 7.4 EN ISO and EN ISO The update on progress on both projects was presented by the secretary (see Annex B slide 11). Mr Brissard informed that the comments received through DIS/CEN Enquiry are being treated by ISO/TC67/WG10 and once finished they will be circulated to CEN/TC Conclusions of these reports The convenors and working groups members were thanked for their commitment in these projects that are wished to progress for next spring time. As a reminder, participation to working groups is open at any time. 8 Items for future work 8.1 Metering and measuring (testing) of LNG [D2/2012 R. Roue] See the slide 12 of Annex B. The Chairman reminded last year decision with regards to this new work item (see Decision 2/2012 doc. 420), the idea was to launch this new project on measuring and metering. Mr Roue informed that currently ISO/TC28/SC4/WG6 is looking at LNG Fuel quality. Mr Brissard informed that there is a potential new work item regarding metering and measuring to be initiated by jointly work within ISO/TC67/WG10 and ISO/TC28/SC5. As no progress have been done on this new work item, it was proposed that CEN/TC282 contacts CEN/TC237 Gas meters to verify if they would be interested in the new work item. The secretariat will launch a call for experts within TC282 to check if there are enough interest in this new work item. The secretary reminded that in order to register the project in the work programme we need at least 5 NSBs willing to participate actively. See Decisions 4, 5, 6 & 7/2013 with regards to actions to be undertaken for metering and measuring potential new project. Association Française de Normalisation 11, rue Francis de Préssensé F La Plaine Saint Denis cedex SIRET NORMA F 0275 màj:

6 DECISION 4/2013 taken by CEN/TC 282 on Subject: CEN/TC 282 Metering and Measuring (testing) of LNG for fuel applications CEN/TC282 Installation and equipment for LNG suggests ensuring that specific features of LNG are taken into account by initiated jointly work within ISO/TC67/WG10 and ISO/TC28/SC5 regarding metering and measuring potential new work item. The decision was taken by unanimity. DECISION 5/2013 taken by CEN/TC 282 on Subject: CEN/TC 282 Metering and Measuring (testing) of LNG for fuel applications CEN/TC 282 Installation and equipment for LNG, decides that: Call for experts is to be launched by the TC282 secretary regarding the potential new work item on metering and measuring (testing) of LNG for fuel applications. The decision was taken by unanimity. DECISION 6/2013 taken by CEN/TC 282 on Subject: CEN/TC 282 Metering and Measuring (testing) of LNG for fuel applications CEN/TC 282 Installation and equipment for LNG, decides to: CEN/TC282 secretary contacts CEN/TC237 Gas meters to verify if they would be interested in this potential new work item on Metering and Measuring (testing) of LNG for fuel applications. The decision was taken by unanimity. DECISION 7/2013 taken by CEN/TC 282 on Subject: CEN/TC 282 LNG Fuel quality CEN/TC 282 Installation and equipment for LNG, decides to: CEN/TC282 suggests ensuring that specific features of LNG are taken into account by initiated work within ISO/TC28/SC4/WG6 regarding LNG as a marine fuel. CEN/TC282 recommendation is to involve ISO/TC67/WG10 in this work if the work is initiated. The decision was taken by unanimity. 8.2 Floating Storage Regasification Unit (FSRU) [D2/2012 D. Acheroy] Mr Acheroy has prepared the headlines of the new work item (see slide 4 of Annex D): More and more FSRU and FPSO: off-shore and near-shore New EN 1473 specifies that, for FSRU permanently berthed to a fix jetty with m from shore line, provisions of EN 1473 will apply for the fix part FSRU standard required to complement IMO codes Key issues: Safety: risk assessment and mitigation FSRU/FPSO deck spillage protection Risk of explosion on finger type jetty when both FSRU and shuttle are berthed safety management between units: FSRU, shuttle and fix part Fire & explosion protection on jetty, if any LNG containment (sloshing, roll-over and safety valve sizing) After discussion, it was recommended that Mr Acheroy continues the initiated work by defining more in details the scope of the project and by inviting European operators to involve them into the work. See Decision 8/2013. DECISION 8/2013 taken by CEN/TC 282 on Subject: CEN/TC 282- Floating Storage Regasification Unit (FSRU) CEN/TC 282 Installation and equipment for LNG, suggests that: Daniel Acheroy continues the initiated work on FSRU by defining more in details the scope of the project and to contact European operators to involve them into the initiated work. The decision was taken by unanimity. Association Française de Normalisation 11, rue Francis de Préssensé F La Plaine Saint Denis cedex SIRET NORMA F 0275 màj:

7 8.3 Other items related to the Business plan. The Business Plan was revised and published in May CEN/TC282 has no updates for now on to the document. 9 Systematic review 9.1 & 9.2 EN :2008 & EN :2008 : The systematic review ballots were opened between April and July 2013 for: EN :2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses EN :2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 3: Offshore transfer systems You will find the ballot results in the doc. N446 CEN/TC282 decided to CONFIRM the above mentioned standards. See Decision 9/2013. DECISION 9/2013 taken by CEN/TC 282 on Subject: CEN/TC 282- Systematic review 2013: EN :2008 & EN :2008 Systematic review ballots were opened between April and July 2013 for: EN :2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses EN :2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 3: Offshore transfer systems Following the received votes, CEN/TC282 decides to confirm the above mentioned standards. The decision was taken by unanimity. 10 Environmental aspects inputs in the guide for sector forum gas infrastructure Please see slide 15 of Annex B. Mr Acheroy supplied the following information with regards to environmental aspects table: Requested during 2012 steering committee Need to fill environmental indicator table for LNG facilities Table included: Environmental indicators Related definition of environmental impacts Related examples of sources of impacts CEN TC/282 Filled table was issued in January 2013 The CEN/TC data will be used by CEN/TC12 after its plenary meeting in February 2014 After discussion, it was agreed that the finalized table will be reviewed by Shannon LNG as Shannon has already introduced this kind of request in Ireland based on European legislation. The table is currently under review and will be circulated within TC282 for comments. See Decision 10/2013. Association Française de Normalisation 11, rue Francis de Préssensé F La Plaine Saint Denis cedex SIRET NORMA F 0275 màj:

8 DECISION 10/2013 taken by CEN/TC 282 on Subject: CEN/TC Environmental aspects inputs in the guide for sector forum gas infrastructure The secretary of CEN/TC282 is requested to circulate the environmental indicator table for LNG facilities prepared by Mr Daniel Acheroy and reviewed by Shannon LNG (Mr Martin Ahern - Ireland) for comments. The decision was taken by unanimity. 11 Report from internal and external liaisons 11.1 CEN/TC 12 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries You will find the secretary report and Chairman s presentation in the doc. N CEN/TC 265 Site built metallic tanks for the storage of liquids No report 11.3 CEN/TC 268 Cryogenic vessels You will find the secretary report and Chairman Presentation in the doc. N ISO/TC 67/WG 10 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries / Liquefied Natural Gas (LNG) installations and equipment - Liaison officer : Roger Roue You will find the secretary s presentation in the doc. N ISO/TC 28/SC 5 "Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels" - Liaison officer : Mr. Michio Doi You will find the secretary report in the doc. N SIGTTO Liaison officer: Roger Roue No report received CEN/TC 408 Natural gas and biomethane for use in transport and biomethane for injection in the natural gas grid - Liaison officer: Jacques Dubost See the discussion in the point ISO/PC 252 Natural gas fuelling stations for vehicles- Liaison officer: Vaclav Chrz See slide 8 of Annex B Conclusion of report and review of liaisons A presentation of a proposal of new liaison with Marcogaz WG Liquefied Natural Gas Applications, prepared by Ms Gouriotou was performed by the Chairman (see the doc.445). Following the presentation, participants agreed on the need to liaise with Marcogaz WG. Association Française de Normalisation 11, rue Francis de Préssensé F La Plaine Saint Denis cedex SIRET NORMA F 0275 màj:

9 See decision 11/2013. DECISION 11/2013 taken by CEN/TC 282 on Subject: CEN/TC 282 Liaisons CEN/TC 282 Installation and equipment for LNG, decides to: Confirm the existing liaisons and to liaise with MARCOGAZ WG Liquefied Natural Gas Applications, and to nominate Ms Vivi Gouriotou as a Liaison 0fficer. The decision was taken by unanimity. 11 Preparation of the next meeting (date, venue, home work) See decision 12/2013. DECISION 12/2013 taken by CEN/TC 282 on Subject: CEN/TC 282 Preparation of the next meeting (date, venue, homework) CEN/TC 282 Installation and equipment for LNG, decides to: Organise the next (23 rd ) meeting on November, the 6 th The venue will be in Paris (France). An intermediate webinar meeting is planned for April, the 30 th 2014 at 10 a.m to 12 a.m. The decision was taken by unanimity. 12 Any other business: The information was shared within TC282 with regards to opening fifth LNG filling station in Sweden (please see the press release in Annex E). 13 Approval of the resolutions All the resolutions were approved unanimously, see doc. N443 The Chairman thanked AFNOR for the venue of this meeting and participants for their commitment and wished a safe trip back for all. Association Française de Normalisation 11, rue Francis de Préssensé F La Plaine Saint Denis cedex SIRET NORMA F 0275 màj:

10 ANNEXE A

11

12

13

14

15

16

17 ANNEXE B

18 CEN/TC 282 Installation and Equipment for LNG 22nd Plenary Meeting 5th December 2013 JAL - A. GOY 22 nd CEN/TC 282 Meeting

19 Opening of the meeting, roll call of delegates Welcoming for the 22nd CEN/TC 282 meeting in France Main objectives of the meeting: Review of the current work progress WI Onshore Installation >200t WI Onshore Installation rev WI EN ISO Characteristics of LNG (design, material) WI EN ISO Desi. Test. LNG MTA for COT Future work Metering and measuring (testing) of LNG Competencies of terminal operators Systematic review EN :2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses EN :2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 3: Offshore transfer systems 2 JAL - A. GOY 22 nd CEN/TC 282 Meeting

20 Opening of the meeting, roll call of delegates Main objectives of the meeting (continued): Environmental aspects Inputs in the guide for sector forum gas infrastructure Roll call: 6 Countries : Cyprus, Czech Republic, France, Greece, Netherlands, Sweden 3 JAL- GOY 22 nd CEN/TC 282 Meeting

21 5 Follow-up of 2012 Decisions: Decision 2/2012: Preparation of headlines of a potential new work item related to metering and measuring (testing) of LNG for fuel applications Under discussion (see 8.1) Decision 3/2012: Preparation of headlines of a potential new work item related to Floating Storage and Regasification Units for circulation Done (see 8.2) Decision 4/2012: Revised Business plan adoption Done Decision 5/2012: To adopt an equivalent level of safety between EN 1473& PWI Martin Hassett s update (liaison between CEN/TC/282/WG2 & WG5): Progress has been made in aligning PWI and EN1473 however more is to be done to minimize the comparison between 2 standards. The work is to be continued during WG2 meeting ( 3rd-4th of Dec. 2013) More comments have been made by WG2 on the draft including a proposal to introduce the Risk Assessment sections from EN1473 into PWI JAL- A. GOY 22 nd CEN/TC 282 Meeting

22 5 Follow-up of actions: Decision 6/2012: Liaison with CEN/TC 408 and ISO/PC 252 Done Decision 7/2012: To verify that BS 6364 on valve testing is taken into account in the ISO draft standard. Confirmed by Mr Daniel Williams (remplacing Mr K. Frettel) that BS6364 will be taken into account in the NWIP proposed by ISO/TC67/WG10 Decision 8/2012: Next meetings Done 5 -JAL - GOY 22 nd CEN/TC 282 Meeting

23 6 CEN/TC 282 Work structure Reference Committee Title Status CEN/TC 282/WG 1 Ship to shore interface Disbanded CEN/TC 282/WG 2 Design of onshore installations Active CEN/TC 282/WG 3 LNG carrier/onshore installation interface Dormant CEN/TC 282/WG 4 Equipments and tests of equipments Dormant CEN/TC 282/WG 5 Installation and equipment for liquefied natural gas - Design of onshore installations Active 6 CPB - A. GOY 22 nd CEN/TC 282 Meeting

24 6 Work programme pren ISO Characteristics of LNG influencing design and material selection Vienna agreement with ISO/TC 67/WG 10 pren ISO Design and Testing of LNG Marine Transfer Arms for Conventional Onshore Terminals Vienna agreement with ISO/TC 67/WG 10 pren 1473 Installation and equipment for liquefied natural gas - Design of onshore installations CEN Enquiry to be launched decision to be taken Preliminary : WI Installation and equipment for LNG Design of onshore installations with a storage capacity more than 200 t LNG at pressures higher than 0,5 bar Work in progress under the responsibility of Czech Republic. Done under WG2. 7 JAL - A. GOY 22 nd CEN/TC 282 Meeting

25 6 Current work on LNG as fuel ISO/PC 252 Project committee: Natural gas fuelling stations for vehicles ISO/DIS Natural gas fuelling stations -- LNG stations for fuelling vehicles» CEN/TC 408 Project Committee-Natural gas and biomethane for use in transport and biomethane for injection in the natural gas grid Potential work of LNG as fuel and marine fuel 8 JAL- A. GOY 22 nd CEN/TC 282 Meeting

26 7 Report of the Convenors of WGs WG 2 «Design of onshore installation» convenor Mr Vaclav CHRZ The preliminary project (WI ) Installation and equipment for LNG - Design of installations storing LNG at pressures over 500 mbar ACTION: TC 282 to activate Work Item ( 2 options): Decision can be performed at the plennary meeting, or TC consultation to be opened (min. 1 month ballot) a Next step: 12 months maximum to finalize the draft for CEN Enquiry 9 JAL - A. GOY 22 nd CEN/TC 282 Meeting

27 7 Report of the Convenors of WGs WG 5 «Installation and equipment for LNG - Design of onshore installations» convenor Mr Daniel ACHEROY The revision of pren 1473 Installation and equipment for liquefied natural gas - Design of onshore installations Draft was finalised by WG5 in July 2013 Principal changes performed in the project => see Mr D. Acheroy s presentation ACTION: TC282 to decide if the project can be sent for CEN Enquiry The deadline date: 16/01/ JAL - A. GOY 22 nd CEN/TC 282 Meeting

28 7 Report of the Convenors of WGs EN ISO (rev EN WI ) DIS/ENQ: February/July 2013 Comments received treated by ISO/TC/67/WG10 Next step: FDIS/Formal Vote EN ISO (rev EN 1160:1996 WI ) DIS/ENQ: March/August 2013 Comments received treated by ISO/TC/67/WG10 Next step: FDIS/Formal Vote 11 JAL - A. GOY 22 nd CEN/TC 282 Meeting

29 8 Future work 8.1 Metering and measuring (testing) of LNG Decision 2/2012 Headlines of a potential new work item to be prepared by Roger Roue (UK) ACTION: As per information supplied by Mr Roue, ISO/TC28/SC4/WG6 is currently looking at LNG Fuel quality The future of the new work item to be decided by TC Floating Storage Regasification Unit (FSRU) Decision 3/2012 Headlines of a potential new work item to be prepared by Daniel Acheroy ACTION: See Daniel Acheroy s presentation CEN/TC 282 agrees on this new project? New WG to be created Daniel Acheroy as a convenor Consultation on acceptation of new work item and creation of WG dedicated? 12 JAL - A. GOY 22 nd CEN/TC 282 Meeting

30 8 Future work Other items related to the Business plan Last actions reminder: - The revised business plan was approved by TC282 with 100% of positive vote - Publication: May 2013 ACTION: Should any updates to be done in the business plan for 2014? Any new items for future work? 13 JAL - A. GOY 22 nd CEN/TC 282 Meeting

31 9 Results of systematic review 2013 EN :2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 2: Design and testing of transfer hoses CIB voting dates: to votes 14 x confirmation EN :2008 Installation and equipment for liquefied natural gas - Design and testing of marine transfer systems - Part 3: Offshore transfer systems CIB voting dates: to votes 14 x confirmation ACTION: To confirm, revise or cancel the following standards. 14 JAL - A. GOY 22 nd CEN/TC 282 Meeting

32 10- Environmental aspects inputs in the guide for sector forum gas infrastructure Last meeting discussion: After discussion on the current matrix description of the environmental aspects of LNG activities in the transversal guideline drafted by CEN/SFG Infrastructure, Daniel Acheroy has volunteered to review the possible inclusion so that LNG would be in line with the other sectors related to natural gas. See Daniel Acheroy s presentation ACTION: Secretariat to follow up with CEN/TC12 in order to include information prepared by TC JAL - A. GOY 22 nd CEN/TC 282 Meeting

33 11 Report from internal and external liaison CEN/TC 12 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries CEN/TC 265 Site built metallic tanks for the storage of liquids CEN/TC 268 Cryogenic vessels ISO/TC 67/WG 10 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries / Liquefied Natural Gas (LNG) installations and equipment - Liaison officer : Roger Roue/Christian Brissard ISO/TC 28/SC 5 Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels - Liaison officer : Dominique Ingrain/Michio Doi SIGTTO Liaison officer : Roger Roue CEN/TC 408 Natural gas and biomethane for use in transport and biomethane for injection in the natural gas grid - Liaison officer: Jacques Dubost ISO/PC 252 Natural gas fuelling stations for vehicles- Liaison officer: Vaclav Chrz 16 => Discussions/decision to be taken on existing liaisons JAL - A. GOY 22 nd CEN/TC 282 Meeting

34 11 Report from internal and external liaison Proposal of a new liaison: MARCOGAZ WG LNG Applications Liaison officer: Ms Vivi Gourioti ( Greece) See presentation ACTION: Decision to be taken on liaison with MARCOGAZ 17 JAL - A. GOY 22 nd CEN/TC 282 Meeting

35 12 - Preparation of the next meeting April 2014 Mid-term web meeting October rd Plennary Meeting 13 Any other business Press release regarding fifth LNG filling station in Sweden 14 Approval of the decisions Thank you for your participation! 18 JAL - A. GOY 22 nd CEN/TC 282 Meeting

36 ANNEXE C

37 Report for the 22nd plenary meeting of CEN/TC 282 On in AFNOR La Plaine Saint Denis in Paris CEN/TC282/Working Group 2: Preliminary Work Item: PWI Installation and equipment for LNG - Design of onshore installations with a storage capacity more than 200 t LNG at pressures higher than 0,5 bar Situation report Vaclav Chrz, delegate of the Czech Normalization Institute (UNMZ) to CEN/TC282, (Czech Gas Assoc.; Chart Ferox, a.s.) Convenor of WG02

38 Subject of this task Definition of requirements on storage of LNG in pressure vessels. Distinguishing it from widely defined and studied storage in flat bottom tanks for storage at atmospheric pressure (or close to it). Definition by terms of technology, not by quantity of gas only. Addressing the appropriate level of safety with respect to quantity (above second tier of Seveso II.)

39 Introduction: Curent state of technology (1) Vacuum insulated LNG tank 500 m3, 8 bar, 200 ton LNG Vacuum insulated LNG tanks 683 m3, 8 bar

40 Curent state of technology (2) Examples of LNG (satellite) plants: This is not any satellite plant re EN1473, 3.23 because of no gas pipeline Ferry re-fueling station, m3 LNG, total 400 ton Current limit of the EN13645 is 200 ton These plants are not covered by EN13645, however, they are being designed and approved in accordance with this norm. satellite plants m3 LNG, total 600 ton m3 LNG, total 1366 ton

41 Curent state of technology (3) Examples of LNG (satellite) plants: Combined system - Scangas plant Oera, Norway 6400 m3 total tanks volume, supplied by a 6000 m3 LNG carrier ship for Re-gasification to local pipelines Road distribution of LNG with trailers Ship fueling m m m3 LNG, total gross volume 6400 m3, 2400 ton storage capacity

42 Liquefier storages Also: m3, 8 bar = 750 ton liquefier storage built for GASUM, Finland, in 2010

43 The working horse of modern LNG onshore technology Transportation of a 1000 m3 vacuum insulated LNG tank

44 Proposal for action (TC282 in 2010) Storage capacity 5 to 200 ton Storage capacity more than 200 ton Storage pressure close to atmospheric EN (indirectly) Not fully applicable technically EN 1473 Storage pressure more than 50 kpa EN EN-new: Storage of LNG at pressure higher than 50 kpa and quantities larger than 200 ton. Can be done relatively easily in reasonable time. Risk analysis with respect to Seveso Directive to be addressed additionally to requirements of the EN 13645, possibly other issues related to larger storage volumes. Can be done relatively easily in reasonable time. No infringing with current systems of the norm.

45 Current sources of the PWI (2013) EN (LNG storage 5 to 200 ton) The first draft based on modification for larger quantities. This standard doesn t specify enough explicit requirements and is missing some parts of the technology and operation. Experience with existing installations ISO/DIS LNG stations for fueling vehicles...which further includes inputs from NFPA 52 and its references to NFPA 59A.

46 Work in 2013 WG2 Meeting Brussels June, 2013 Work on the first half of the text, proposed in WG2 meeting Paris 3-4 December, 2013 Work on the second half of the text, proposed in Oustanding work: Annexes Implementation of Martin Hasset s suggestions (not finished). Requirements on BLEVE prevention listed.

47 Team at the meeting Dec, 2013 Name, Surname Brissard, Christian Chrz, Vaclav (convenor) Giacosa, Alain (invited expert) Iglesias Albacete, Lorena Hjorteland, Jostein Company Total, large-lng gas company, expert standards Chart, technology vendor Total, LNG engineering GDF Suez Tractebel, plant engineering Gasnor, the largest operator of the technology

48 Decision 5/2012 of the TC282 Equivalent level of safety between EN 1473 and PWI Martin Hassett was appointed liasion manager. Martin s comments and suggestions received. The meeting of the WG2 on 3 4 Dec, 2013 reviewed the proposals. Most of them accepted or slightly modified. Requirements on inclusion chapters of EN 1473 will be solved with review sentence by sentence and applied as far as appropriate to the specific technology. (Sections 9, F,13, 14.3, Marine facilities, and some subitems)

49 Decision 6/2012 of the TC282 Liasion with CEN/TC208 Jacques Dubost (Biomethane) No common activity, yet.

50 Next Meeting of the WG2 Second half of February 2014 at Chart Ferox, a.s., Decin, Czech Republic. Agenda: Completion of outstanding tasks Discussion on critical items How far we will be from the Committee Draft?

51 ANNEXE D

52 RESTRICTED CEN/TC 282 DECEMBER 2013 STEERING COMITTEE D. Acheroy CHOOSE EXPERTS, FIND PARTNERS

53 2 RESTRICTED EN 1473 UPDATING Draft of updated version was issued to TC secretary in July 2013 No main changes but: Specific attention for: Plant debottlenecking Plant revamping Plant life extension Plant expansion Coverage of new solutions: Bunkering station Permanently berthed FSRU and FSU AAV (ambient air vaporisers) References to new ISO standards (28460, 16901, 16903) Clarifications to questions arisen since 2007

54 3 ENVIRONMENTAL ASSESSMENT RESTRICTED Requested during 2012 steering committee Need to fill environmental indicator table for LNG facilities Table included: Environmental indicators Related definition of environmental impacts Related examples of sources of impacts CEN TC/282 Filled table was issued in January 2013 The CEN/TC data will be used by CEN/TC12 after its plenary meeting in February 2014

55 4 RESTRICTED FSRU/FPSO NEW TASK More and more FSRU and FPSO: off-shore and near-shore New EN 1473 specifies that, for FSRU permanently berthed to a fix jetty with m from shore line, provisions of EN 1473 will apply for the fix part FSRU standard required to complement IMO codes Key issues: Safety: risk assessment and mitigation FSRU/FPSO deck spillage protection Risk of explosion on finger type jetty when both FSRU and shuttle are berthed safety management between units: FSRU, shuttle and fix part Fire & explosion protection on jetty, if any LNG containment (sloshing, roll-over and safety valve sizing)

56 THANK YOU FOR YOUR ATTENTION RESTRICTED CHOOSE EXPERTS, FIND PARTNERS

57 ANNEXE E

58 A major environmental step for the heavy vehicle sector: Infrastructure for liquefied methane gas is growing Transport sector accounts for a significant proportion of carbon emissions in traffic. In 2010 FordonsGas Sweden AB s opened the first public filling station for liquid methane gas in Sweden and now it's time for the next station at a Volvo Truck retailer Finnvedens Lastvagnar in Jönköping to be open. - We are happy to announce that we are now opening our second BiGreen filling station, the product name for our liquefied methane gas. Finally there is a valid alternative fuel for heavy trucks that works - something that has been requested for a long time, says Bo Ramberg, MD FordonsGas. Today, transportation is very dependent on oil. With Volvo's new MDE (Methane Diesel Engine) trucks and FordonsGas new filling station for BiGreen, the heavy transport sector finally gets an option that is both economically and environmentally sustainable. In a global perspective the liquefied methane gas as fuel is growing, and many truck manufacturers are now investing in the technology. The methane gas is cooled down to minus 163 C degrees and turns than into liquefied gas. Compared to compressed vehicle gas (CNG), liquefied gas has a higher energy density and a lower volume, which means that the tank can be filled with much more gas. The station in Jönköping is provided with liquefied biogas directly from the biogas plant in Lidköping. The biogas is produced by local residual waste from the food industry. - The station in Jönköping is the fifth station for liquefied gas in Sweden. This means that the infrastructure is now growing outside the big cities. It feels great to finally open in Jönköping, a hub for the logistics of many major companies in Sweden, says Bo Ramberg. First refuelling on Sept. 16, 2013 For more information and pictures Bo Ramberg, CEO FordonsGas Sweden AB Mobile: The station officially opens later this fall, but you can already refuel at the station. The station is part of the project BiMe Trucks. Read more at Directly connected to the LMG (LBG / LNG) station (liquefied gas), you can also fuel CNG for light vehicles. FordonsGas Sweden AB thereby opens its third filling station with Eco labelled gas in Jönköping and our 40th station in Sweden.

Doc. Number: N Report of CEN/TC 267 Secretariat "Industrial piping and pipelines" for the 30 th Plenary Meeting 27 October 2016 (Paris)

Doc. Number: N Report of CEN/TC 267 Secretariat Industrial piping and pipelines for the 30 th Plenary Meeting 27 October 2016 (Paris) «Industrial piping and pipelines» CEN/TC 67 Date: 016-09-7 Assistant: Patricia DUFOUR Direct line: + (0)1 7 17 67 8 p.dufour@unm.fr Doc. Number: N 1069 Your contact: Patrick AMESLON Direct line: + (0)1

More information

Contact: Title: Resolutions of ISO/TC th plenary meeting held on in Tokyo (Japan) Source: TC secretariat. Project(s): Status:

Contact: Title: Resolutions of ISO/TC th plenary meeting held on in Tokyo (Japan) Source: TC secretariat. Project(s): Status: Date 2007-11-26 Supersedes document Reference number ISO/TC 224 N 360 This document is still under study and subject to change. It should not be used for reference purposes. ISO/TC 224 Title: Service activities

More information

CEN/TC 442 Decisions taken /16

CEN/TC 442 Decisions taken /16 CEN/TC 442 Building Information Modelling (BIM) CEN/TC 442 Decisions taken 2016-02-15/16 Date: 2016-02-16 Secretariat Reference: CEN/TC 442 N065 SN (Norway) Lisbet Landfald e-mail: lla@standard.no Direct

More information

EU Best practice of Technical Committees and benefits that could be achieved

EU Best practice of Technical Committees and benefits that could be achieved EU Best practice of Technical Committees and benefits that could be achieved Ian Greensmith Senior Standards Expert Brussels, 29 th of January 2013 www.inogate.org What is a standard? Standard: document,

More information

CEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442

CEN/TC 442. Building Information Modelling REPORT TO ACE BRUSSELS ØIVIND ROOTH, CHAIR CEN/TC442 CEN/TC 442 Building Information Modelling REPORT TO ACE BRUSSELS 2017-11-01 ØIVIND ROOTH, CHAIR CEN/TC442 Norwegian leadership in CEN and ISO 2 2 New structure decided in CEN/TC442 plenary meeting in Dublin

More information

Irish Standard I.S. EN :2011

Irish Standard I.S. EN :2011 Irish Standard Petroleum and natural gas industries - Induction bends, fittings and flanges for pipeline transportation systems - Part 1: Induction bends (ISO 15590-1:2009 modified) NSAI 2011 No copying

More information

ISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements

ISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 April 2003 ICS 23.040.01; 91.140.40 English version Plastics piping systems for the supply of gaseous fuels - Polyethylene

More information

CEN/TC 12. and ISO TC67 SC4 Plenary meeting in PAU (2004)

CEN/TC 12. and ISO TC67 SC4 Plenary meeting in PAU (2004) ISO/TC 67/SC 4 N 282 CEN/TC 12 and ISO TC67 SC4 Plenary meeting in PAU (2004) 12/13 May 2004 1 1 CEN TC12 AND ISO TC67 CEN TC12 is acting according to the goal of the Industry: GLOBAL STANDARDS USED LOCALLY

More information

ISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials

ISO INTERNATIONAL STANDARD. Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials INTERNATIONAL STANDARD ISO 3452-2 First edition 2000-04-01 Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials Essais non destructifs Examen par ressuage Partie 2: Essais des

More information

PETROLEUM AND NATURAL GAS

PETROLEUM AND NATURAL GAS IRISH STANDARD I.S. EN ISO 10432:2005 ICS 75.180.10 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland PETROLEUM AND NATURAL GAS INDUSTRIES - DOWNHOLE EQUIPMENT - Tel: +353 1 807 3800

More information

ISO INTERNATIONAL STANDARD. Packaging Tactile warnings of danger Requirements. Emballages Indications tactiles de danger Exigences

ISO INTERNATIONAL STANDARD. Packaging Tactile warnings of danger Requirements. Emballages Indications tactiles de danger Exigences INTERNATIONAL STANDARD ISO 11683 Second edition 1997-10-01 Corrected and reprinted 1998-09-01 Packaging Tactile warnings of danger Requirements Emballages Indications tactiles de danger Exigences A Reference

More information

BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 203 CAST IRON PIPES, FITTINGS AND THEIR JOINTS EXECUTIVE SUMMARY Standards to be delivered by this TC cover pipe products for the construction of public, industrial or private

More information

BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 58 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS Scope EXECUTIVE SUMMARY Safety and control devices for equipment burning gaseous or

More information

Final Business Plan for a CEN Workshop on

Final Business Plan for a CEN Workshop on 1/6 Final for a CEN Workshop on Humanitarian Mine Action - Test and evaluation - Metal detectors - Part 2: Soil characterisation for metal detector and ground penetrating radar performance TABLE OF CONTENTS

More information

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 1: General INTERNATIONAL STANDARD ISO 9100-1 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 1: General Récipients en verre Bagues à crans pour bouchage sous vide Partie 1: Généralités Reference

More information

The standards of the European gas infrastructure. Main functional standards for maximum operating pressure over 16 bar

The standards of the European gas infrastructure. Main functional standards for maximum operating pressure over 16 bar The standards of the European gas infrastructure. Main functional standards for maximum operating pressure over 16 bar Petrenko V.E., D. Eng. Sc. Development of Standardisation Technical Committees in

More information

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 12: 89 regular

ISO INTERNATIONAL STANDARD. Glass containers Vacuum lug finishes Part 12: 89 regular INTERNATIONAL STANDARD ISO 9100-12 First edition 2005-01-15 Glass containers Vacuum lug finishes Part 12: 89 regular Récipients en verre Bagues à crans pour bouchage sous vide Partie 12: 89 regular Reference

More information

BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS

BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS Page:1 BUSINESS PLAN CEN/TC 23 TRANSPORTABLE GAS CYLINDERS 1 BUSINESS ENVIRONMENT OF THE CEN/TC 1.1 Description of the Business Environment The following political, economic, technical, regulatory, legal,

More information

ISO INTERNATIONAL STANDARD. Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed

ISO INTERNATIONAL STANDARD. Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed INTERNATIONAL STANDARD ISO 14744-4 First edition 2000-04-15 Welding Acceptance inspection of electron beam welding machines Part 4: Measurement of welding speed Soudage Essais de réception des machines

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 13938-1 First edition 1999-08-01 Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension Textiles Propriétés

More information

ISO 7458 INTERNATIONAL STANDARD. Glass containers Internal pressure resistance Test methods

ISO 7458 INTERNATIONAL STANDARD. Glass containers Internal pressure resistance Test methods INTERNATIONAL STANDARD ISO 7458 Second edition 2004-03-01 Glass containers Internal pressure resistance Test methods Récipients en verre Résistance à la pression interne Méthodes d'essai Reference number

More information

BUSINESS PLAN. CEN/TC 444 Test methods for environmental characterization of solid matrices

BUSINESS PLAN. CEN/TC 444 Test methods for environmental characterization of solid matrices Page: 1 BUSINESS PLAN CEN/TC 444 Test methods for environmental characterization of solid matrices EXECUTIVE SUMMARY Scope Standardization of test methods for the environmental characterization of soil,

More information

On , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1).

On , CCMC received a proposal from DIN for the creation of a new Technical Committee in the area of Food Authenticity (see Annex 1). BT N 11281 Draft BT C143/2018 TECHNICAL BOARD CEN/BT by correspondence For vote Issue date: 2018-08-22 According to IR2 Clause 6.1.4 Deadline: 2018-11-20 SUBJECT Establishment of a new TC on Food authenticity

More information

STANDARDISATION OF SRF (ISO/TC 300)

STANDARDISATION OF SRF (ISO/TC 300) STANDARDISATION OF SRF (ISO/TC 300) Mikko Talola Chairman of CEN/TC 343 & ISO/TC 300 Workshop Production and utilisation options for Solid Recovered Fuels EUBCE 2018 Copenhagen, Denmark May 17, 2018 SRF

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 15609-5 First edition 2004-08-01 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding Descriptif

More information

ISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion

ISO 2411 INTERNATIONAL STANDARD. Rubber- or plastics-coated fabrics Determination of coating adhesion INTERNATIONAL STANDARD ISO 2411 Third edition 2000-06-01 Rubber- or plastics-coated fabrics Determination of coating adhesion Supports textiles revêtus de caoutchouc ou de plastique Détermination de l

More information

CEN/TC 151 N 800. N 800 CEN TC 396 Activity report. Date of document Expected action

CEN/TC 151 N 800. N 800 CEN TC 396 Activity report. Date of document Expected action CEN/TC 151 N 800 CEN/TC 151 Construction equipment and building material machines - Safety E-mail of Secretary: rene.kampmeier_vdma.org@livelink.din.de Secretariat: DIN N 800 CEN TC 396 Activity report

More information

ISO 1806 INTERNATIONAL STANDARD. Fishing nets Determination of mesh breaking force of netting

ISO 1806 INTERNATIONAL STANDARD. Fishing nets Determination of mesh breaking force of netting INTERNATIONAL STANDARD ISO 1806 Second edition 2002-12-01 Fishing nets Determination of mesh breaking force of netting Filets de pêche Détermination de la force de rupture de la maille de nappe de filet

More information

International standards used locally worldwide ISO/TC 67

International standards used locally worldwide ISO/TC 67 / International standards used locally worldwide ISO/TC 67 International standardization for materials, equipment and offshore structures for the petroleum, petrochemical and natural gas industries Cecilie

More information

CEN/TC 207 N N Work programme May Document type: Other committee document. Date of document:

CEN/TC 207 N N Work programme May Document type: Other committee document. Date of document: CEN/TC 207 N 1646 CEN/TC 207 Furniture Email of secretary: fabrizio.tacca@uni.com Secretariat: UNI (Italy) N 1646 - Work programme May 2016 Document type: Other committee document Date of document: 2016-05-05

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 12570 First edition 2000-03-15 Hygrothermal performance of building materials and products Determination of moisture content by drying at elevated temperature Performance hygrothermique

More information

ISO 505 INTERNATIONAL STANDARD. Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts

ISO 505 INTERNATIONAL STANDARD. Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts INTERNATIONAL STANDARD ISO 505 Second edition 1999-11-15 Conveyor belts Method for the determination of the tear propagation resistance of textile conveyor belts Courroies transporteuses Méthode de détermination

More information

CEN/TC 256 Overview. Presentation to ISCC January C Cork Chair CEN/TC CEN all rights reserved

CEN/TC 256 Overview. Presentation to ISCC January C Cork Chair CEN/TC CEN all rights reserved CEN/TC 256 Overview Presentation to ISCC January 2017 C Cork Chair CEN/TC 256 Overview of presentation CEN/TC 256 Organisation Developments in 2016 Key outputs Activities for 2017 2 CEN/TC 256 Committee

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 13937-2 First edition 2000-04-01 Textiles Tear properties of fabrics Part 2: Determination of tear force of trousershaped test specimens (Single tear method) Textiles Propriétés

More information

BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 301 ROAD VEHICLES EXECUTIVE SUMMARY Business Environment Europe represents about 20% of vehicles of the world market. However the automotive industry is acting globally, the

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for whole shoe Washability in a domestic washing machine

ISO INTERNATIONAL STANDARD. Footwear Test methods for whole shoe Washability in a domestic washing machine INTERNATIONAL STANDARD ISO 19954 First edition 2003-10-01 Footwear Test methods for whole shoe Washability in a domestic washing machine Chaussures Méthodes d'essai s'appliquant à la chaussure entière

More information

ISO INTERNATIONAL STANDARD

ISO INTERNATIONAL STANDARD INTERNATIONAL STANDARD ISO 13937-3 First edition 2000-04-01 Textiles Tear properties of fabrics Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) Textiles Propriétés

More information

ISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements

ISO INTERNATIONAL STANDARD. Rotary positive displacement pumps Technical requirements INTERNATIONAL STANDARD ISO 14847 First edition 1999-04-01 Rotary positive displacement pumps Technical requirements Pompes volumétriques à mouvement rotatif Prescriptions techniques A Reference number

More information

BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 197 PUMPS EXECUTIVE SUMMARY Pumps are widely used in industry and facilities applications at a worldwide level. European pumps production represents a prime part of of the

More information

BUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY

BUSINESS PLAN. CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY Business Environment BUSINESS PLAN CEN/TC 137 Business Plan Date: 01.09.04 Version: 2 Approved BP Page: 1 CEN/TC 137 Assessment of workplace exposure to chemical and biological agents EXECUTIVE SUMMARY

More information

WG IV/ CEN/TC 251 WG IV. HEALTH INFORMATICS - Technology for Interoperability SECRETARIAT: S&SSP at NHSIA

WG IV/ CEN/TC 251 WG IV. HEALTH INFORMATICS - Technology for Interoperability SECRETARIAT: S&SSP at NHSIA WG IV/ Saved: 13 October 2003 N03-08 Page 1 of 5 CEN/TC 251 WG IV HEALTH INFORMATICS - Technology for Interoperability SECRETARIAT: S&SSP at NHSIA TITLE/ SUBJECT: SOURCE: WGIV and ISO TC215 WG2.1 (devices)

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL REPORT RAPPORT TECHNIQUE TECHNISCHER BERICHT CEN/TR 16411 December 2014 ICS 97.190 Supersedes CEN/TR 16411:2014 English Version Child use and care articles - 2014 compiled interpretations of

More information

A Notification under Article 12 of Regulation (EU) No 1025/2012 1

A Notification under Article 12 of Regulation (EU) No 1025/2012 1 EUROPEAN COMMISSION ENTERPRISE AND INDUSTRY DIRECTORATE-GENERAL Sustainable Growth and EU 2020 Standards for Boosting Competitiveness Brussels, 02/07/2014 A Notification under Article 12 of Regulation

More information

PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code

PAPER - DETERMINATION OF BURSTING STRENGTH (ISO 2758:2001) IRISH STANDARD I.S. EN ISO 2758:2003. Price Code IRISH STANDARD I.S. EN ISO 2758:2003 ICS 85.060 National Standards Authority of Ireland Glasnevin, Dublin 9 Ireland Tel: +353 1 807 3800 Fax: +353 1 807 3838 http://www.nsai.ie PAPER - DETERMINATION OF

More information

ISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General

ISO INTERNATIONAL STANDARD. Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General INTERNATIONAL STANDARD ISO 15875-1 First edition 2003-12-01 Plastics piping systems for hot and cold water installations Crosslinked polyethylene (PE-X) Part 1: General Systèmes de canalisations en plastique

More information

BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION EXECUTIVE SUMMARY BUSINESS PLAN CEN/TC 305 POTENTIALLY EXPLOSIVE ATMOSPHERES EXPLOSION PREVENTION AND PROTECTION CEN/TC 305 Business Plan Page: 1 Business environment, benefits and priorities EXECUTIVE SUMMARY CEN/TC 305

More information

Introduction to ISO and ISO membership

Introduction to ISO and ISO membership Introduction to ISO and ISO membership 2 ISO Mission ISO develops high quality voluntary International Standards which facilitate international exchange of goods and services, support sustainable and equitable

More information

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Part 1: Determination of film properties INTERNATIONAL STANDARD ISO 9311-1 First edition 2005-08-15 Adhesives for thermoplastic piping systems Part 1: Determination of film properties Adhésifs pour réseaux de tuyauteries en matières thermoplastiques

More information

ILNAS-EN ISO 2692:2006

ILNAS-EN ISO 2692:2006 Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO 2692:2006) Geometrische

More information

ISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test

ISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test Provläsningsexemplar / Preview TECHNICAL SPECIFICATION ISO/TS 17892-6 First edition 2004-10-15 Geotechnical investigation and testing Laboratory testing of soil Part 6: Fall cone test Reconnaissance et

More information

Minutes of CEN/TC 261 Packaging meeting held on 8 February 2017 in Paris France

Minutes of CEN/TC 261 Packaging meeting held on 8 February 2017 in Paris France «Packaging» CEN/TC 261 Date: 2017-03-08 Doc. Number: N 535 Assistant: Emilia PINTO Direct line: + 33 (0)1 41 62 87 44 Emilia.pintopereira@afnor.org Your contact: Annick GALPIN Direct line : + 33 (0)1 41

More information

BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 121 WELDING AND ALLIED PROCESSES EXECUTIVE SUMMARY Business Environment Standardization of welding by all processes, as well as allied processes; these standards include terminology,

More information

CEN/TC 229 "Precast concrete products CEN/TC 229 N nd meeting of CEN/TC (Oslo) Draft agenda Revision 1

CEN/TC 229 Precast concrete products CEN/TC 229 N nd meeting of CEN/TC (Oslo) Draft agenda Revision 1 AFNOR-NORMALISATION Unit Construction and Water Cycle Department CEN/TC 229 Secretariat Your correspondent : Jean-Claude HESLING direct line : +33 (0)1 41 62 83 93 jeanclaude.hesling@afnor.org Secretary

More information

Camping tents (ISO 5912:2011)

Camping tents (ISO 5912:2011) Irish Standard I.S. EN ISO 5912:2011 Camping tents (ISO 5912:2011) NSAI 2011 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard national specification based

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 9100-2:2005 Glass containers - Vacuum lug finishes - Part 2: 33 medium Glass containers - Vacuum lug finishes - Part 2: 33 medium EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA

More information

The term of the incumbent chairperson of ISO/TC 135/SC 3, Mr. Udo Schlengermann expires at the end of year 2013.

The term of the incumbent chairperson of ISO/TC 135/SC 3, Mr. Udo Schlengermann expires at the end of year 2013. ISO/TC 135 N 476 Non-destructive testing Our Date: 2013-10-15 Number of Pages:9 (Incl. this page.) To: Cc : ISO Central Secretariat P-members and O-members of ISO/TC 135 Chairmen and Secretaries of ISO/TC

More information

STANDARDIZATION A FRAMEWORK FOR PROGRESS FOR ALL STANDARDS AS TOOLS FOR SMART & SUSTAINABLE CITIES

STANDARDIZATION A FRAMEWORK FOR PROGRESS FOR ALL STANDARDS AS TOOLS FOR SMART & SUSTAINABLE CITIES STANDARDS AS TOOLS FOR SMART & SUSTAINABLE CITIES STANDARDIZATION A FRAMEWORK FOR PROGRESS FOR ALL SUSTAINABLE CITY BUSINESS FORUM CAIRO, November 23, 2017 Pascale Mienville AFNOR Etienne CAILLEAU ISO/TC

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 13244-7 August 2003 ICS 93.030 English version Plastics piping systems for buried and above-ground pressure systems for water

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation INTERNATIONAL STANDARD ISO 22654 First edition 2002-06-15 Footwear Test methods for outsoles Tensile strength and elongation Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à la

More information

Report. CEN/TC 55 Dentistry

Report. CEN/TC 55 Dentistry Date 2009-03-30 CEN/TC 55 N 562 Report of the Plenary meeting of CEN/TC 55 Dentistry held on 2009-03-03 in Bratislava Contents 1 Opening of the meeting...3 2 Roll call of delegates...3 3 Adoption of the

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 15749-4:2004 Ships and marine technology - Drainage systems on ships and marine structures - Part 4: Sanitary drainage, sewage disposal pipes Ships and marine technology - Drainage

More information

EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE

EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE TC62/SEC1015/INF October 2009 EUROPEAN COMMITTEE FOR ELECTROTECHNICAL STANDARDIZATION (CENELEC) TECHNICAL COMMITTEE No. 62: ELECTRICALEQUIPMENT IN MEDICAL PRACTICE SOFTWARE AND MEDICAL DEVICES WORKING

More information

Status report to ISO/TC204 October 2012

Status report to ISO/TC204 October 2012 [CEN/TC278/WG1 N1658] CEN/TC278/WG1 & ISO/TC204/WG5 Status report to ISO/TC204 October 2012 Jesper Engdahl Jesper Engdahl, WG Convenor Rapp Trans AG Hochstrasse 100 CH-4018 Basel, Switzerland Phone: +41

More information

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011)

Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO :2011) Irish Standard I.S. EN ISO 12543-2:2011 Glass in building - Laminated glass and laminated safety glass - Part 2: Laminated safety glass (ISO 12543-2:2011) NSAI 2011 No copying without NSAI permission except

More information

Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses

Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses BRITISH STANDARD BS EN ISO 1307:2008 Rubber and plastics hoses Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses ICS 23.040.70 National foreword This British Standard

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Tensile strength and elongation INTERNATIONAL STANDARD ISO 22654 First edition 2002-06-15 Footwear Test methods for outsoles Tensile strength and elongation Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à la

More information

Paper and board - Determination of grammage (ISO 536:2012)

Paper and board - Determination of grammage (ISO 536:2012) Irish Standard I.S. EN ISO 536:2012 Paper and board - Determination of grammage (ISO 536:2012) NSAI 2012 No copying without NSAI permission except as permitted by copyright law. I.S. xxx: Irish Standard

More information

About European Standards

About European Standards About European Standards Aquaculture workshop Brussels, Centre Borschette 2017-04-27 Andrea NAM 1 Actors in standardization The European Standardization Organizations (ESOs) The Regional Standardization

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Abrasion resistance

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Abrasion resistance INTERNATIONAL STANDARD ISO 20871 First edition 2001-12-15 Footwear Test methods for outsoles Abrasion resistance Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à l'abrasion Reference

More information

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives

ISO INTERNATIONAL STANDARD. Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives INTERNATIONAL STANDARD ISO 15908 First edition 2002-12-01 Adhesives for thermoplastic piping systems Test method for the determination of thermal stability of adhesives Adhésifs pour réseaux de tuyauteries

More information

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012)

Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) Irish Standard I.S. EN ISO 4032:2012 Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012) CEN 2013 No copying without NSAI permission except as permitted by copyright law. I.S. xxx:

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 534:2005 Paper and board - Determination of thickness, density and specific volume Paper and board - Determination of thickness, density and specific volume EESTI STANDARDIKESKUS

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 13443:2005 Natural gas - Standard reference conditions Natural gas - Standard reference conditions EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev Eesti

More information

Confused by standards Standards for social alarms

Confused by standards Standards for social alarms Confused by standards Standards for social alarms Chris Dodd Strategic Development Director Chair of the BSI Technical Committee for Social Alarms Convenor (Chair) of the CENELEC technical committee for

More information

BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS EXECUTIVE SUMMARY BUSINESS PLAN CEN/TC 10 LIFTS, ESCALATORS AND MOVING WALKS CEN/TC 10 Business Plan Page: 1 EXECUTIVE SUMMARY Lifts, escalators, moving walks and building hoists are essential elements in providing safe

More information

ISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints

ISO INTERNATIONAL STANDARD. Steel cord conveyor belts Part 4: Vulcanized belt joints INTERNATIONAL STANDARD ISO 15236-4 First edition 2004-06-15 Steel cord conveyor belts Part 4: Vulcanized belt joints Courroies transporteuses à câbles d'acier Partie 4: Jonctions vulcanisées des courroies

More information

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Flex resistance

ISO INTERNATIONAL STANDARD. Footwear Test methods for outsoles Flex resistance INTERNATIONAL STANDARD ISO 17707 First edition 2005-07-01 Footwear Test methods for outsoles Flex resistance Chaussures Méthodes d'essai applicables aux semelles d'usure Résistance à la flexion Reference

More information

ISO/TC 211 Geographic information/geomatics

ISO/TC 211 Geographic information/geomatics 2012-06-08 Number of pages: 7 ISO/TC 211 Geographic information/geomatics Title: Source: Resolutions from the 34th ISO/TC 211 plenary meeting in Toulouse, France, 2012-06-07/08 ISO/TC 211 plenary Expected

More information

EN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006)

EN ISO Welding coordination Tasks and responsibilities. Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006) ÖNORM EN ISO 14731 Edition: 2007-03-01 Welding coordination Tasks and responsibilities (ISO 14731:2006) Schweißaufsicht Aufgaben und Verantwortung (ISO 14731:2006) Coordination en soudage Tâches et responsabilités

More information

BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 69 INDUSTRIAL VALVES EXECUTIVE SUMMARY Business Environment Europe represents approximately 28,6 % of the world market. The parties involved are: - manufacturers of industrial

More information

ISO/TC 207 COMMUNIQUÉ

ISO/TC 207 COMMUNIQUÉ COMMUNIQUÉ 9 th Annual Meeting of ISO/TC 207 on Environmental Management ISO/TC 207 held its 9 th Plenary meetings in Kuala Lumpur, Malaysia from July 2 to July 8, 2001. Member bodies from 56 countries

More information

ISO INTERNATIONAL STANDARD. Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies

ISO INTERNATIONAL STANDARD. Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies INTERNATIONAL STANDARD ISO 14557 First edition 2002-12-01 Fire-fighting hoses Rubber and plastics suction hoses and hose assemblies Tuyaux de lutte contre l incendie Tuyaux d aspiration et flexibles en

More information

This document is a preview generated by EVS

This document is a preview generated by EVS TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 14972 May 2008 ICS 13.220.20 English Version Fixed firefighting systems - Watermist systems - Design and installation Installations

More information

Draft minutes of the meeting of

Draft minutes of the meeting of Date 2013-07-18 CEN/TC 226/WG 3 N 148 "Vertical signs" Draft minutes of the meeting of CEN/TC 226/WG 3 "Vertical signs on 2013-05-23 in Bergisch-Gladbach participants: Name Richard Adam Christian Bargen

More information

Radiation. Pekka Vuorinen. Finnish Association of Construction Product Industries RTT

Radiation. Pekka Vuorinen. Finnish Association of Construction Product Industries RTT Radiation Pekka Vuorinen Finnish Association of Construction Product Industries RTT Mandate M/366 - description Work Package 5: horizontal standards: emission scenarios in indoor air 3. Horizontal standard

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 17657-4:2007 Resistance welding - Welding current measurement for resistance welding - Part 4: Calibration system Resistance welding - Welding current measurement for resistance

More information

Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011)

Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) Irish Standard Paints and varnishes - Corrosion protection by protective paint systems - Assessment of porosity in a dry film (ISO 29601:2011) NSAI 2011 No copying without NSAI permission except as permitted

More information

CYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus

CYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus CYS & NEN Integrated Hydrocarbons Training Programme CYS and the Hydrocarbon Sector in Cyprus December 8 th, 2015 CLEOPATRA HOTEL Nicosia Cyprus Prepared by Michalis Zantis (CYS) Purpose of this Workshop

More information

ISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 10: Direct shear tests

ISO/TS TECHNICAL SPECIFICATION. Geotechnical investigation and testing Laboratory testing of soil Part 10: Direct shear tests TECHNICAL SPECIFICATION ISO/TS 17892-10 First edition 2004-10-15 Geotechnical investigation and testing Laboratory testing of soil Part 10: Direct shear tests Reconnaissance et essais géotechniques Essais

More information

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009)

Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) Irish Standard I.S. EN ISO 10874:2012 Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) NSAI 2012 No copying without NSAI permission except as permitted by copyright law.

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 6507-4:2006 Metallic materials - Vickers hardness test - Part 4: Tables and hardness values Metallic materials - Vickers hardness test - Part 4: Tables and hardness values EESTI

More information

ISO/TS TECHNICAL SPECIFICATION

ISO/TS TECHNICAL SPECIFICATION TECHNICAL SPECIFICATION ISO/TS 17892-8 First edition 2004-10-15 Geotechnical investigation and testing Laboratory testing of soil Part 8: Unconsolidated undrained triaxial test Reconnaissance et essais

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 10405:2006 Petroleum and natural gas industries - Care and use of casing and tubing Petroleum and natural gas industries - Care and use of casing and tubing EESTI STANDARDIKESKUS

More information

WORK PACKAGE 4 DELIVERABLE D.T4.1.4

WORK PACKAGE 4 DELIVERABLE D.T4.1.4 WORK PACKAGE 4 DELIVERABLE D.T4.1.4 Strategy to facilitate the integration of Dynamic Lighting into EN 13201 and related regulations Version 1 10-2017. 1. Introduction According to the Technical Report

More information

BUSINESS PLAN CEN/TC 132 ALUMINUM AND ALUMINIUM ALLOYS EXECUTIVE SUMMARY

BUSINESS PLAN CEN/TC 132 ALUMINUM AND ALUMINIUM ALLOYS EXECUTIVE SUMMARY Page: 1 BUSINESS PLAN CEN/TC 132 ALUMINUM AND ALUMINIUM ALLOYS EXECUTIVE SUMMARY 1. BUSINESS ENVIRONMENT OF THE CEN/TC 132 It may be hard to believe but only 150 years ago aluminium was considered to be

More information

Sýnishorn ISO INTERNATIONAL STANDARD. Geotechnical investigation and testing Field testing Part 3: Standard penetration test

Sýnishorn ISO INTERNATIONAL STANDARD. Geotechnical investigation and testing Field testing Part 3: Standard penetration test INTERNATIONAL STANDARD ISO 22476-3 First edition 2005-01-15 Geotechnical investigation and testing Field testing Part 3: Standard penetration test Reconnaissance et essais géotechniques Essais en place

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 10664:2005 Hexalobular internal driving feature for bolts and screws Hexalobular internal driving feature for bolts and screws EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL

More information

This document is a preview generated by EVS

This document is a preview generated by EVS EESTI STANDARD EVS-EN ISO 7092:2000 Plain washers - Small series - Product grade A Plain washers - Small series - Product grade A EESTI STANDARDIKESKUS EESTI STANDARDI EESSÕNA NATIONAL FOREWORD Käesolev

More information

CEN System Delegated Decisions Dispatch 33:2016

CEN System Delegated Decisions Dispatch 33:2016 2016-08-16 Page 1 CEN System Delegated Decisions Dispatch 33:2016 1 CEN/TC 127 Correspondence... 1 2 CEN/TC 147 Correspondence... 9 3 CEN/TC 160 Correspondence... 10 4 CEN/TC 182 Correspondence... 12 5

More information