Remotely programmable and controllable alarm system

Size: px

Start display at page:

Download "Remotely programmable and controllable alarm system"

Linette Hicks
5 years ago
Views:

1 Remotely programmable and controllable alarm system

2 TP10- Management of max. hard-wired zones Management of max. wireless zones (used alternatively to the hard-wired zones) 1 tamper input zone inputs for conventional detectors 1 Sensor Bus port for 6 RSC peripheral devices 1 RS5 port for conventional peripheral devices 1 Siren Bus port for RSC sirens 1 alarm output for indoor siren 1 alarm output for outdoor siren 6 programmable logic outputs On-board PSTN interface: channels with telephone numbers each Event notification in the formats: speech, SMS, Ring, DTMF, FSK and data Communication vectors: PSTN (on-board), GSM-GPRS, GSM and TCP/IP (optional) GSM network cell scanner function Jammer detector function Voice synthesis Management of multiuser systems with common zones Management of the telematic services DDNS Tecnoalarm, SNTP and Mail Server Tecnoalarm programs remote controls timers 6 access periods cyclic timers Quadrennial or perpetual calendar Management of biometric finger print and RFID card readers 1 access codes 100 finger prints 100 transponders/rfid cards 0 wireless keys Digital control of the radio range and interferences Programmable coincidence function Event buffer with a capacity of 7600 events 1.V power supply output for battery recharge Battery test with automatic disconnection in case of failure 3A linear power supply Standard equipment Expansions Control modes Automation Software options/compatibility with monitoring software Ports

3 H 90mm H 309mm D 10mm L 39mm Inputs CPU ESP-0 STD -1OC ALM PL PLUS PLUS ALM PLUS CONVENTIONAL* ZONE BUS SENSOR BUS * The following contact types can be programmed: NC (normally closed), NO (normally open), BIL (end-of-line resistor), B (double end-of-line resistor). The following filters can be programmed: time, pulse count or inertia. Cameras Recording Viewing UTS V - 1/ UTS V - 1/ Cameras Recording Viewing UTS E 1/ Technical evaluation index Serial ports Communication vectors Videoalarm/Telematic Services TP-0 TP-0 GSM TP- TP- GSM TP10- TP- TP0-0 ATE ATE ATE C C D ATE ATE ATE C C D ATE ATE ATE ATE ATE ATE ATE ATE ATE ATE A A A ATE ATE ATE ATE A A A ATE ATE ATE ATE A A A A: excellent - B: good - C: satisfactory - D: not implemented 3

POWER SUPPLIES TAPS- BUS ALM PLUS PLUS PLUS SRA SRINT + SRA + SR - - SIREN BUS

3 PROX UTS V UTS V UTS C SERIAL BUS +SRA - SIR - - + OUT3 + OUT PROG INTERFACE

010 BUS SIRTEC BUS 6 TELEPHONE COMMUNICATORS AUXILIARY CONTROL UNITS

4 POWER SUPPLIES TAPS- BUS ALM PLUS PLUS PLUS SRA SRINT + SRA + SR - - SIREN BUS SIREN BUS CONSOLES LCDPROX1 LCD300/S UTS.3 PROX UTS V UTS V UTS C SERIAL BUS +SRA - SIR OUT3 + OUT PROG INTERFACE SIREN BUS ESP LAN ETHERNET PORT SENSOR BUS ESP GSM-GPRS ESP -0 BUS SIRENS SAEL 010 BUS SIRTEC BUS 6 TELEPHONE COMMUNICATORS AUXILIARY CONTROL UNITS TECNOCELL-PRO PL TP SKN PROX K6N DIGITEX APR CARD APR FINGER APR FINGER-CARD 1 The label indicates the number of connectable devices per type.

System conﬁguration ALM PL -1OC STD SRA SRINT OUT 1-1 10 1 PROG

RTX00/336 RTX500 BWL RTX500S BWL N UTS E IP CAMERA 10 1

BWL RX300/336 1 3 5 6 7 RTX00/336 Tecnoalarm Server TELEMATIC

5 System conﬁguration ALM PL -1OC STD SRA SRINT OUT PROG USB PROG3 WIRELESS SYNC@BWL Use alternatively to RX300/336 - RTX00/336 RTX500 BWL RTX500S BWL N UTS E IP CAMERA 10 1 WIRELESS ASYNC@WL 3 Use alternatively to RTX500 BWL - RTX500S BWL RX300/ RTX00/336 Tecnoalarm Server TELEMATIC SERVICES + OUTPUT EXPANSIONS ESP RP ESP RSP ESP RS ESP3-OCN SINOTTICO 3N 16 5

Internal expansions and interfaces ESP-0 Approved for use with certified control panels

detectors and Zone Bus detectors (only the first two inputs) Item no.

Ethernet-Interface The interface implements the IP vector and permits remote management with

F17ESPLAN ESP GSM-GPRS Approved for use with certified control panels Mounting position

6 Internal expansions and interfaces ESP-0 Approved for use with certified control panels Mounting position Expansion module with parallel inputs for the connection of conventional detectors and Zone Bus detectors (only the first two inputs) Item no. F17TP0ESP ESP LAN Approved for use with certified control panels Mounting position Ethernet-Interface The interface implements the IP vector and permits remote management with TCP/IP. Item no. F17ESPLAN ESP GSM-GPRS Approved for use with certified control panels Mounting position Interface for the connection of the control panel with the GSM or GSM-GPRS network The interface allows to use the GSM or GSM-GPRS network as communication vector. Item no. F17ESPGSMGPRS MOUNTING POSITIONS B C A 6

7 MODELS Model Item no. TP10- F101T-IT Optional Optional Optional 3A OPTIONS Option ADVANCED PROGRAMMING Item no. F17T/AV Advanced programming software module VECTORS SMS Vector Device Class DDNS MAIL APP RDV SMS Remote controls Remote management Monitoring PSTN ON-BOARD ATE GSM-GPRS* ESP GSM-GPRS ATE/ GSM-EXT* TECNOCELL PRO PL ATE IP* ESP LAN ATE/ * The vectors GSM-GPRS, GSM-EXT and IP are optional and require the installation of internal and external interfaces. Class - The class defines the performance criteria of the alarm transmission equipment (ATE) for alarm notification. In compliance with the valid standards, the criteria of performance are divided into six classes from ATE1 to ATE6. The vectors are classified as ATE or ATE according to the communication protocols used. The class ATE requires the use of encrypted protocols. The IP vector has been certified class ATE on the basis of internal tests executed by Tecnoalarm. TP10- - Accessories GSM ANTENNA EXTENSION m extension cord for the connection of the antenna to the GSM-GPRS module 7 Item no. C16PROLANTENNA

Systems TP10- - Technical and functional specifications Zones Outputs System features Programs and access management Automation Telephone section Telematic services Total logic zones conventional CPU

prints 100 Transponders/RFID 100 Wireless keys 0 Timers Access periods 6 Calendar Quadrennial or perpetual Remote controls Cyclic timers TCS (test call with TCP/IP) Channels PSTN vector On-board

digits) Call event queue 3 Communication protocols 16 DDNS Tecnoalarm Mail Server Tecnoalarm SNTP Videoalarm Serial expansions Advanced programming Accessory management Electrical specifications

Wireless consoles (ASYNC@WL) Actions 1,0 Timers 51 Counters 1 Telephone index numbers Reserved output expansions App (iphone + Android) Printer management Operating voltage CPU board consumption

8 Systems TP10- - Technical and functional specifications Zones Outputs System features Programs and access management Automation Telephone section Telematic services Total logic zones conventional CPU hard-wired zones 6 Sensor Bus Total hard-wired zones Total wireless zones CPU outputs 6 programmable Sirens RS5 serial bus 3 Voice synthesis Event buffer capacity 7,600 events Programs Codes 1 Finger prints 100 Transponders/RFID 100 Wireless keys 0 Timers Access periods 6 Calendar Quadrennial or perpetual Remote controls Cyclic timers TCS (test call with TCP/IP) Channels PSTN vector On-board GSM-GPRS vector (optional) ESP GSM-GPRS GSM vector (optional) TECNOCELL-PRO PL IP vector (optional) ESP LAN Transmittable events 157 Telephone numbers/ip addresses per channel (max. digits) Call event queue 3 Communication protocols 16 DDNS Tecnoalarm Mail Server Tecnoalarm SNTP Videoalarm Serial expansions Advanced programming Accessory management Electrical specifications Physical specifications CCTV IP Hard-wired input expansions 10 Wireless expansions Consoles Auxiliary control units Output expansions 16 GSM telephone communicator 1 Bus sirens Wireless sirens Wireless consoles (ASYNC@WL) Actions 1,0 Timers 51 Counters 1 Telephone index numbers Reserved output expansions App (iphone + Android) Printer management Operating voltage CPU board consumption Power supply Battery Environmental class Casing Dimensions (L x H x D) (w/o antenna) Antenna height Weight (w/o battery) Operating temperature 30V AC +/-10% 50Hz 13.V DC 1.V DC 1x 1V/1Ah II Metal 39 x 309 x 10mm 90mm.kg -10 C +55 C Humidity (w/o condensation) 93% Conformity Directive R&TTE 1999/05/EC Via Ciriè, San Mauro T.se Torino (Italy) tel fax tecnoalarm@tecnoalarm.com , Rue Antoine Pinay Genas Lyon (France) tél fax tecnoalarm.france@tecnoalarm.com Agence de Paris: 15, Rue Louis Roche 930 Gennevilliers c/vapor 1 (Pol. Ind. El Regas) 050 Gavá - Barcelona (España) tel tecnoalarm@tecnoalarm.es

TP Expandable serial alarm system. Great versatility and cutting-edge technology for a comprehensive protection of a high level

TP Expandable serial alarm system. Great versatility and cutting-edge technology for a comprehensive protection of a high level TP10-42 Expandable serial alarm system Great versatility and cutting-edge technology for a comprehensive protection of a high level Tecnoalarm RSC Technology RSC (Remote Sensitivity Control) is an exclusive