DOES YOUR CABLE COVER COMPLY?

Transcription

1 LV JUICE July 2016 DOES YOUR CABLE COVER COMPLY? AS/NZ PENETRATION TEST One of the most important requirements of AS/NZ is that cable cover must pass a penetration test, where a specifically designed dart of known weight is dropped from a predetermined height through 125 joules of energy, representing potentially catastrophic damage to the cable cover. The cable cover passes the test only when the dart penetrates it by less than 50mm. CCASNZ cable cover available from TransNet consistently complies with this AS/NZ strength requirement, ensuring cables are adequately protected. WHAT MAKES TRANSNET CABLE COVER DIFFERENT? Passes a penetration test allowing no more than 50mm penetration Consistently strong throughout the body of the product NZ made from recycled HDPE plastic No contaminants Available ex stock Thinner and lighter while consistently complying with AS/NZ4702 standard strength requirements Ability to manufacture custom sizes up to 1m wide Every batch of CCASNZ cable cover is tested throughout the manufacturing process Retains mechanical strength characteristics even in extreme temperatures Gas and Electricity specific product available WHEN ORDERING BE SURE TO ASK FOR CCASNZ CABLE COVER This Month FREE WHILE STOCKS LAST SOUR COLA BOTTLES When you spend over $300 (excl GST) on one invoice this month COMPLETE SOLAR STREETLIGHT KIT PAGE 2 WHY CHOOSE RAYCHEM? UTILUX CABLE MANAGEMENT PAGE 4 PAGE 7

2 SOLAR STREETLIGHT KIT SOLAR STREET LIGHT 70W Solar Module 20W LED Lamp 4.5m Galvanised Steel Pole up to 3 days "No Sun" Days IP65 IP Rating OUTSTANDING DESIGN The 20W ECOLight LED streetlight head delivers exceptional performance while substantially reducing operational costs. This cutting edge LED luminaire is perfect for most road lighting applications. The design incorporates high lumen output with excellent optical design and light distribution achieved by the dual LED chips angled optimally to get optimum light spread. All this contained within a robust IP65 housing. TOTAL PACKAGE When installing a solar powered light it s important to make sure you have all the components required to do the job. The ECOLight solar LED street light kits are comprehensive, offering you everything from the luminaire right through to the pole and the batteries, all packaged up and ready to install. With Galvanised Steel poles, Stainless Steel control boxes and Lithium batteries these units command respect from the outset. Built to perform in the harshest of environments, they provide an effortless solution to even the most demanding of situations. IDEAL FOR City streets Highways Public parks Car parks Subdivisions Hospitals Corrections Facilities Part No. LEDSOLAR-ST20KIT $ GST ECO LIGHT

3 THE ESSENTIALS TRANSNET GALVANISED EARTH RODS All our galvanised rods are made to meticulous standards and exceed the minimum thickness requirements outlined in AS/NZS 3000:2007a, reducing the risk of corrosion and ensuring a good lifespan. Why TransNet Earth Rods? Dipped after cutting to reduce risk of corrosion Rigidly inspected to eliminate defects Extremely cost-effective Sold in packs of mm x 16mm O.D. 3 styles available PLAIN WITH TAG TAG FOR TNHD12A Exceeds Requirements You don't have to compromise on quality when it comes to galvanised rods. Zinc rods that can't meet the AS/NZS3000:2007a minimum surface treatment are illegal to install, will degrade faster and need replacing sooner. Product: #E-ROD-GALV-PLAIN #E-ROD-GALV-16MM-TAG #E-ROD-GALV-HD12A NZ STYLE SPLIT BOLT CONNECTORS compliant to as/nzs 3000:2007 re q uir e m ents Used in New Zealand since the late 1940s, This style of split bolt has proven to be a simple to use connector for use on copper overhead lines. Our NZ style connectors are made in Australia from Australian Brass and have an electro tinned finish. Benefits Affordable Long-lasting Simple to install - no special tools Range taking design - connectors fit multiple cable combinations Can be removed easily Range accommodates 4mm² to 120mm² (in just 8 connectors) Grooved plate to help grip wire and give better connection Hex nut for easy installation compliant to bs3288:part1: sectio n Cat No. Conductor Size Range Min. (mm²) Max. (mm²) Min. (mm O.D.) Max. (mm O.D.) TNHD TNHD TNHD TNHD12A TNHD TNHD TNHD TNHD All Specials and Products featured in TRANSNET JUICE are available from all good electrical wholesalers.

4 WHY CHOOSE RAYCHEM? Raychem was the first company to develop products using "radiation chemistry", discovering that the process of crosslinking allows material to be heated, expanded and cooled, and later reheated to its original size for superior insulation and protection. Heatshrink tubing is the result of this revolutionary process. TRUST RAYCHEM TECHNOLOGY TO KEEP WORKING EVEN WHEN YOU AREN T Raychem has supplied parts to millions of installations in some of the most severe service conditions. Distinguished by high mechanical toughness and resistance to weathering and chemicals, Raychem products are synonymous with reliability in extreme environments. Raychem exerts control over every aspect of the production process, from sourcing materials to R&D to manufacture and distribution. Start to finish, Raychem makes sure every aspect of their operation adheres to the highest standards so that you always know what to expect. 50 COUNTRIES The result of decades of experience, the Raychem product line shows high levels of service and quality. Using their advanced know-how in the field of material science, Raychem has developed a complete system of cable accessories up to 170kV. 90,000 EMPLOYEES TRIED & PROVEN Raychem 40+yrs in NZ IN HARSH NZ CONDITIONS Founded 1957 Leaders in cross-linking technology, the Raychem product line provides high levels of service, quality, and decades of experience, with products that continue to perform in the field for 40 years and counting. Our customers appreciate knowing that the products they install will work even in the harshest environments New Zealand has to offer TE Connectivity TE connectivity (logo) and EVERY CONNECTION COUNTS are trademarks All Specials and Products featured in TRANSNET JUICE are available from all good electrical wholesalers.

5 VSCAN CABLE & PIPE LOCATORS vscan features Removable loudspeaker - output limited to HSE safety levels Peak level indicator Compass (line direction indicator) Self-test and calibration verification Data logging & data management software Configuration utility - personalise your vscan Bluetooth & GPS options Metal detection (TNVSCANM-KIT only) receiver Vibrate alert Compass (line direction indicator) High contrast display with backlight Push buttons on/off and menu activation Internal loudspeaker Rotary gain/sensitivity control Paddle - navigation/select transmitter Output status lights Speaker volume control Rugged ABS housing with protective bumpers Battery housing for alkaline or Lithium ion battery packs USB socket - programming/data transfer Modes Power mode Switch - pulse/continuous output Output level select Radio mode Active modes 33Hz & 131kHz Sonde mode (33Hz) Metal locate mode (vscanm only) cat no. #TNVSCANS-KIT Standard Pipe & Cable Locator Kit cat no. #TNVSCANM-KIT Pipe & Cable Locator Kit with Metal Detector

6 UTILUX CABLE MANAGEMENT UTILUX BAND STRAP & BUCKLES Utilux band straps and buckles are versatile, durable and easy to use. Made of stainless steel to minimise corrosion, there are four sizes available to cover a range of applications. Strap is supplied in 30m dispensers and buckles in packs of 100. Band Strap Features Stainless steel minimising corrosion Versatile Durable Easy to handle Cost effective Four widths available: 10mm, 12.7mm, 16mm, 19mm Supplied in 30m dispensers Cat No. Band Strap Buckle Size (mm) Reel Colour H3013M-30/1 H3001/ RED H3016M-30/1 H3004/ YELLOW H3019M-30/1 H3007/ GREY H3022M-30/1 H3010/ BLUE STAINLESS STEEL CABLE TIES Utilux Stainless Steel Cable Ties are a quick and effective way to secure cables. Much quicker than traditional strapping systems, they are available with a unique ball bearing locking mechanism that allows the tie to be easily installed and fixed. These ties have an off-set tip to Features Quick and effective Unique ball bearing locking mechanism Off-set tip Cat No. Length (mm) STL-195S/ STL-255S/ STL-335S/ STL-195M/ STL-255M/ STL-335M/ STB-152S/ STB-200S/ STB-360S/ Width (mm) ease insertion of the tie end and are made from 316 non-magnetic stainless steel. Great for flame-proof installations, chemical environments, and situations of long-term external exposure where you need ties that last. Material Stainless Steel 316 grade Tensile Strength 60kg/mm Operating Temperature -80 C to >500 C Loop Tensile Strength Standard Range: 45kg Heavy Duty Range: 110kg All Specials and Products featured in TRANSNET JUICE are available from all good electrical wholesalers.

7 DON'T SWEAT THE SMALL STUFF Benchtop Cable Strippers TransNet New Zealand Ltd Auckland 20 Neilpark Drive East Tamaki Auckland NEW ZEALAND Fax PO Box Howick, Auckland Wellington 18 Sydney Street Petone Wellington NEW ZEALAND Ph Fax PO Box Howick, Auckland ATS-5 The ATS-5 Mini Cable Stripping Machine works on a variety of sizes of small O.D cables & flat TPS cables. Built with two rollers, it features five blades on the top roller for cutting off one side of the cable's insulation jacket. It can be operated with either the large hand crank or by attaching a power drill. The square type drill adaptor fits most types of power drill and provides a perfect non-slip attachment. Spring loaded handles on the top of the machine prolong the blade's life and allow you to adjust tension for a perfect cutting result. Save time and effort with this compact and easy-to-use unit. KEY FEATURES Three round and two flat cutting channels Cutting range 1-15mm O.D. Manual feed Weight: 18kg Drive unit - hand crank, power drill Power drill attachment - fits most types NEW ZEALAND TransNet Tonga Ma ufanga Small Industries Ma ufanga TONGA Ph Fax PO Box 2932 Nukualofa TONGA transnet@kalianet.to ATS-50 The ATS-50 Benchtop Cable Stripping Machine was designed for stripping various sizes of cables including flat TPS cables, and features nine blades on the top roller. Powered by a 1 HP 0.75KW Single Phase Motor with a Worm Gear Reducer directly driving the roller, this machine can power through up to 40 metres of cable per minute. Also featuring a safety switch with Emergency Stop Button for added safety, the ATS-50 is a must-have tool to strip large volumes of cable. KEY FEATURES Seven round & two flat cutting channels One crushing channel Cutting range 1-40mm O.D. 0.75kW motor Safety switch with emergency stop button Cutting speed approx. 40m/ min 50kg TO ORDER CALL TransNet NZ Ltd has made every reasonable effort to ensure the accuracy of this information and it is to the best of our knowledge correct and reliable. Under no circumstances does this constitute an assurance of any particular quality or performance and users should independently evaluate the suitability of products for their desired application. All information in this publication including pricing, drawings, illustrations, images and graphic designs are reflections of our current understanding. TransNet NZ Ltd reserves the right to make any adjustment to this information at any time. Our liability for the products outlined in this publication is set forth in our standard terms and conditions of trade. In case of any potential ambiguities or questions, please contact us for clarification.