Integral X-LINE. Security without boundaries. FIRE ALARM.

Transcription

1 Integral X-LINE. Security without boundaries. FIRE ALARM

2 X-LINE

3 A professional for every requirement. The highest quality for security. Fire alarm systems benefit human security and the protection of assets. In order that this highly responsible task can be carried out with 100% reliability, only the highest quality and the newest technology is allowed to be used for this task. Schrack Seconet has once again set another milestone with the development of the Integral IP system family: The use of the latest IP-based technology and the use of global data networks in combination with proven full redundancy and the modular system concept are an additional giant step towards the future. Removing borders. Not only the control units and the networking of control units are fitted with the latest technology, but peripherals have also benefited from a comprehensive range of new features: the Integral X-LINE is a new loop circuit with pioneering features that has been made available to the entire Integral IP system family: where the loop circuit was previously limited to 128 devices and 2,000 metres in length per loop, X-LINE now permits up to 250 devices to be connected across a length of up to 3,500 metres. New, higher performance and energysaving devices have not only considerably reduced the start-up time, but have enhanced and accelerated communications with the fire alarm control panel considerably. Innovative, versatile and flexible. In addition to automatic detectors and manual call points, the X-LINE also manages all types of acoustic and visual alarms, all types of inputs and outputs (e.g. fire alarm devices or controllers for extinguishing systems), special fire detection systems or stub lines for monitoring potentially explosive atmospheres. If required, the loop circuit can be split into two stub lines. The short circuit isolators integrated into every X-LINE device as standard ensure planning security as well as the devices remaining fully functional in the event of a short circuit, wire break or sabotage. Forwards and backwards compatibility. All X-LINE devices can also be used in Schrack Seconet fire alarm systems that are already in use, while detectors and modules from previous generations of systems can also be connected to the X-LINE also in conjunction with new devices. New X-Large dimensions with up to 250 elements and up to 3,500 metres loop length Combines detection and alarm transmission perfectly Forward and backward compatibility Eliminates wire breaks and short circuits Simple to extend and modernised X-LINE Short start-up times European production ensures highest quality

4 X-LINE

5 Intelligent and flexible peripherals. Interactive data communications and functions. The permanent and intelligent communication between the control panel, detectors and modules occurs with the highest degree of transmission security thereby permitting continuous monitoring and evaluation of current system states. Faults in the cabling or deceptive alarms due to electromagnetic disturbances, such as e.g. radio wave interference, overvoltage, impulse disturbances etc. are localised by the control panel as a result of digital data transfer using fault-finding redundant coding, and are automatically filtered out. It is also possible to read out detector contamination levels and the event log memory as well as to collect analogue measurements, such as smoke or temperature levels. The short circuit isolators fitted in every element ensure, even in the event of a detector failing due to a shorting circuit or wire break, that the X-LINE remains fully functional. MTD 533X multi-talented. The MTD 533X multiple sensor detector, with its integrated smoke and temperature sensors, detects all types of fire reliably even in the earliest stage of development under extreme conditions. Depending on the area of application, the MTD 533X can be used as a smoke detector, temperature detector or as a multiple criteria detector. The selection of operating type is made on an individual basis by configuration and can also be subsequently reprogrammed e.g. because of structural alterations or changing environmental conditions. Manual call points for all applications. Depending on necessary requirements, manual call points in different versions and colours are used: Manual call points of Type A or Type B pursuant to EN are available in different protection classes, as well as stop and actuation buttons for extinguishing systems. Sirens and flashing lights. For acoustic and visual alarm transmission there are sirens and flashing lights with different versions and colours, which can be synchronised periodically in active state. Moreover, it is also possible to fit all automatic fire detectors with an acoustic alarm signals. The flash rate, tone type and volume can be programmed for all devices. The X-LINE also offers the possibility of interruption-free alarm notification, and even in the event of a fault all sirens remain active. Flexible modules for seamless monitoring. For connecting fire alarm devices, conventional stub lines or for monitoring hazardous areas, there is a wide range of X-LINE modules available, which depending on requirements and usage can either be completely freely programmed, or can be operated by selecting pre-configured multiple functions (e.g. for controlling special detectors). Quick reaction times during operation. Prevention of deceptive alarms is of paramount importance in fire detection. However, as soon as an alarm has occured, everything must happen as quickly as possible: notification of the fire brigade, intelligent evacuation of the building, the safe activation of all alarm devices and controlling of extinguishing systems. The Integral X-LINE makes absolutely sure, that all of these measures are carried out simultaneously and within a few seconds. Intelligent integration of special fire detectors. Wherever there are special fire detection systems with complex functions and an ever larger quantity of data, and where there are limitations while using a contact-based connection, the X-LINE is able to incorporate such systems using intelligent gateways. Not only do these gateways ensure that all information is stored during operation, but they also enable simple to use remote configuration and data analysis from a central location. If external power supply units are required for supplying special fire detectors, then they can also be integrated into the X-LINE, and thereby monitored. Simple programming and planning. The logical linking of all possible input criteria with controller outputs can be carried both: across multiple loops or across multiple control units. This grouping independent of the physical wiring can be arranged without any difficult to group buildings and rooms that logically belong to one another, such as stairwells, into detector zones, even if they physically belong to different loop circuits or are split between different control units. The logical addresses of the devices can be completely freely selected, which also provides a considerable reduction in terms of costs and time for installation. The programming and commissioning of the Integral X-LINE is carried out sole using software, with a calculation program available for the calculation of the maximum possible loop lengths.

6 X-LINE

7 The competent partner. Easy to modernise. Fire alarm systems, like all other systems, are also subject to constant wear and tear. In addition, changing requirements and needs regarding the function of a building and technological innovations and further development of products used also arise. Modernisation is the blanket term for all measures deployed for replacing and It is equally possible to connect new detectors to old control units as it is possible to connect old detectors to new control units. The greatest advantage in modernising using Integral IP, however, lies in the fact that the existing cabling network does not need to be altered. supplementing ageing equipment with a contemporary version, in order to considerably increase its user value and security. Thanks to Integral IP s comprehensive forward and backward compatibility, it is possible to modernise existing systems quickly and simply. As part of a modular system all adjustments to be made to existing systems can be adapted in line with requirements in clearly defined steps. Easily extendible. Whether changing a detector or connecting additional peripheral components, the extension of the ranges of features, and adaptation of the system for a new use, all this can be accomplished simply and at any time without great expense. Thanks to the X-LINE, these new or modified components also fit in the secure and rapid data communication with the fire alarm control panel. Quick start-up. The Integral X-LINE allows up to 250 devices to be connected across a loop length of up to 3,500 metres. The specially optimised and quick startup process allows the commissioning times, in particular for extensive systems in large buildings, to be reduced considerably. 100% device identification. Every X-LINE device is allocated an individual serial number, which in addition to the commissioning process is also shown on a removable sticker. Once the start-up process for the system has been carried out, the sticker number can be compared with that sent by the respective element. Any topology-based fault occurring in the initial commissioning process can be corrected immediately and in a clear manner, thereby eliminating the need for timeconsuming fault-finding. All Integral X-LINE devices are displayed in the PC tool with their respective article, variant, version and serial numbers. Furthermore is also possible to identify previously installed devices from a centralized location with 100% certainty. European Standard. The Integral IP system family, as well as the Integral X-LINE and all devices that could be connected to it, naturally fulfil all European and national standards and have been tested and approved in accordance with these standards. The production process uses state-of-theart technology and the materials used during production do not contain harmful substances. Development and production takes place exclusively in Europe, in order to ensure the highest possible quality.

8 SCHRACK SECONET AG Headquarter Austria: A-1122 Vienna, Eibesbrunnergasse 18 Tel.: Technical support Fire Alarm Systems Tel.: Technical support Health Care Systems Tel.: Branch offices Austria: A-6850 Dornbirn, Sebastianstraße 13a Tel.: A-8055 Graz, Neuseiersberger Straße 157 Tel.: A-6021 Innsbruck, Valiergasse 56 Tel.: A-9020 Klagenfurt, Feldkirchner Straße 138 Tel.: A-4060 Leonding-Hart, Kornstraße 16 Tel.: A-5020 Salzburg, Vogelweiderstraße 44a Tel.: Partner in FIRE ALARM Czech Rep. CZ Prague 10, V Úžlabině 1490/70 Tel.: Hungary HU-1119 Budapest, Fehérvári út Tel.: India IN Gurgaon, Technopolis, DLF Golf Course Road, Sector-54 Tel.: Poland PL Warsaw, ul. Woloska 9 Tel.: Romania RO Bucharest, Sos.lancului nr. 6A, Sector 2 Tel.: Russia RU Moscow, Ul. Staroalexejevskaja 5 Tel.: Slovakia SK Bratislava Rača, Mudrochova 2 Tel.: Sweden SE Norsborg, Botvid Business Center Tel.: Turkey TR Kadıköy-Istanbul, Kasap Ismail Sk. 5/12 Tel.: BG BIH BY CH CY D DK E EST ET F GE GR HR I IL KS KSA KWT KZ L LT LV MK NL P PK RB RL SLO SRB TM UA UAE UZ Schrack Productions - B-PR-594EN - V Subject to technical modifications!