Dimming - Wired. What do I need? 1-10V Dimmer 4 wires to dimmer. 0/1-10V interface for dimming DimLine Key. Key

Size: px

Start display at page:

Download "Dimming - Wired. What do I need? 1-10V Dimmer 4 wires to dimmer. 0/1-10V interface for dimming DimLine Key. Key"

Loreen Glenn
5 years ago
Views:

1-10V Dimmer 4 wires to dimmer Dimming - Wired Dimming Dimine with a Danlers dimmer and the interface. The DD 10V MB can replace any existing dimmer module.

1 1-10V Dimmer 4 wires to dimmer Dimming - Wired Dimming Dimine with a Danlers dimmer and the interface. The DD 10V MB can replace any existing dimmer module. This gives the user the option to adapt their existing system so that a minimal amount of maintenance is required. The DD is both a 1-10V potentiometer dimmer and a push on/off switch. The DD dimmer can be fitted to any dimmer plate. This is a simple wired dimming solution. Product ode Fitting ength Fitting Fitting DD 10VD MB eutral ive O S _ DPD10VD MB (Dimmer Module) 1+ + G- D P Output 1-10V OT ive DIMSIM eutral egative Dimine/Feeled 0/1-10V interface for dimming Dimine The - 0/1-10V Dimine Interface is the new revolutionary pack from Feelux utron, eax, Rako and Wise ontrols. The interface allows 0 Dimine fittings to be ive eutral egative A booster is available to allow an extra rows of 10 Dimine fittings if needed. Product ode ength hannels OT DIMSIM x 10 Dimine ame Part o. DIMMER MODUE DD 10VD MB FITTIG DS14 DS1 DS8 DS4 DS35 DS39 DS54 S10 S0 DIMIE ITERFAE DIMSIM OUPER DSPT DSPT1 DSPT DSPT4 DSPT6 ORD DSOP

2 1 utron 1-10V Wired Dimming Switch 4 wires to dimmer TV-F0BFAWM Dimming - Wired Dimming Dimine with a yneo Dimmer - Simple Wired Dimming. The yneo dimmer can be placed in a standard single back box and provides a simple dimming option in small installations. The utron yneo TV-F0BFAWM is a dimmer. It needs to be used in conjunction with a 1-10V Interface and will allow up to 0 Dimine fittings to be controlled. eutral ive Product ode Maximum Wattage ength TV-F0BFAWM 300W 85mm 85mm Input 1-10V TV-F0BFAWM (Dimmer Switch) O 1+ + G- D P Output 1-10V OT Dimine/Feeled DimSlim Power ord 0/1-10V interface for dimming Dimine The - 0/1-10V Dimine Interface is the new revolutionary pack from Feelux utron, eax, Rako and Wise ontrols. The interface allows 0 Dimine fittings to be ive eutral egative A booster is available to allow an extra rows of 10 Dimine fittings if needed. Product ode ength hannels OT DIMSIM x 10 Dimine ame Part o. DIMMER MODUE DD 10VD MB FITTIG DS14 DS1 DS8 DS4 DS35 DS39 DS54 S10 S0 DIMIE ITERFAE DIMSIM OUPER DSPT DSPT1 DSPT DSPT4 DSPT6 ORD DSOP

Wise ontrols 1-10V Wireless Dimming Switch 0 wires to dimmer WISESEE Dimming Scene - Wireless Dimming Dimine with Wise Scene ontrols - Simple Wireless Dimming.

The switch is powered by a 3V R03 lithium battery, meaning switch lines are a thing of the past. The WisePack Dimmer allows you to dim any or 1-10V fluorescent fitting.

3 Wise ontrols 1-10V Wireless Dimming Switch 0 wires to dimmer WISESEE Dimming Scene - Wireless Dimming Dimine with Wise Scene ontrols - Simple Wireless Dimming. Using Wise ontrols, 0 Dimine fittings ( x lines of 10) can be controlled wirelessly from a single button. The switch is powered by a 3V R03 lithium battery, meaning switch lines are a thing of the past. The WisePack Dimmer allows you to dim any or 1-10V fluorescent fitting. o switch lines are needed making this controller very flexible as to where you want it to be located or concealed. Mains Supply Wisescene Use in conjunction with any 1 button switch or remote from our Wise Range of products. Simply press once to turn your fitting on or off or hold to dim up or down. Relay Output Max WA R I G Output z0 Switch ode WISEIDDSW1 PS WisePack ode WISESEE Metal Height 5mm Plate 1.5mm Input O G- D Dimine/Feeled P Dimine Power ord 1-10V interface for dimming Dimine The - Dimine Interface is the new revolutionary pack from Feelux that enables the Dimline fluorescent fitting to be controlled using. This allows utron, eax, Rako and Wise ontrols. The interface allows 0 Dimine fittings to be ive eutral egative A booster is available to allow an extra rows of 10 Dimine fittings if needed. Product ode ength hannels OT DIMSIM x 10 Dimine ame Part o. WISESEE DIMMER WISESEE 1 WISEPATE AD MODUE WISEIDDSW1 PS FITTIG DS14 DS1 DS8 DS4 DS35 DS39 DS54 S10 S0 DIMIE ITERFAE DIMSIM OUPER DSPT DSPT1 DSPT DSPT4 DSPT6 ORD DSOP

If all 4 circuits of the intergrale are required simply repeat the instructions below for the other channels. The utron GRAFIK Integrale can interface with the following systems; and DSI.

4 1 utron Wired Scene Dimming Switch 4 wires to dimmer GXI3104 Scene - Wired Dimming Dimine with Grafik Integrale - Scene Setting Dimming. The information below is based on a single circuit being utilised from the Grafik Eye Intergrale. If all 4 circuits of the intergrale are required simply repeat the instructions below for the other channels. The utron GRAFIK Integrale can interface with the following systems; and DSI. The Integrale has a minimum load of 10W per circuit. utron Grafik Eye Intergrale OT GRAFIK Eye preset dimming controls increase the functionality, flexibility and beauty of any space, from the simplest residential applications to the most complex commercial applications. One standard product family handles virtually any job. Product ode ircuit Wattage Maximum Wattage Fitting Fitting Height Fitting Back Box 0/1-10V interface for dimming Dimine GXI3104 /Metal 300W 6mm 115mm 60mm 78mm O 1+ + G- D Dimine/Feeled P Dimine Power ord ive eutral egative The - 0/1-10V Dimine Interface is the new revolutionary pack from Feelux utron, eax, Rako and Wise ontrols. The interface allows 0 Dimine fittings to be A booster is available to allow an extra rows of 10 Dimine fittings if needed. Product ode ength hannels DIMSIM x 10 Dimine ame Part o. UTRO GRAFIK ITEGRAE GX13104TE FITTIG DS14 DS1 DS8 DS4 DS35 DS39 DS54 S10 S0 DIMIE ITERFAE DIMSIM OUPER ORD DSOP30 OT

1 Rako ontrols 1-10V 0 wires to dimmer Wireless Scene Dimming Switch RDF800 Scene - Wireless Dimming Dimine with Rako - Wireless Scene Dimming.

OT The RAKO Fluorescent Pack is a compact RF dimmer for analogue fluorescents. The unit is connected in-line before the first light fitting, to enable dimming of up to of dimmable loads.

Its scene setting capabilities enable different moods to be created for a room.

5 1 Rako ontrols 1-10V 0 wires to dimmer Wireless Scene Dimming Switch RDF800 Scene - Wireless Dimming Dimine with Rako - Wireless Scene Dimming. Using Rako, 0 Dimine fittings ( x lines of 10) can be controlled wirelessly from a single wall panel. Powered by x R016 lithium batteries, Rako ontrols means switch lines are a thing of the past. OT The RAKO Fluorescent Pack is a compact RF dimmer for analogue fluorescents. The unit is connected in-line before the first light fitting, to enable dimming of up to of dimmable loads. The robust microprocessor design combines smooth reliable dimming with dynamic safety features such as auto-resetting over current, temperature shutdown and voltage surge protection. Its scene setting capabilities enable different moods to be created for a room. Product ode Maximum Wattage Height 0/1-10V interface for dimming Dimine RDF800 14mm The new - 0/1-10V Dimine Interface is the new revolutionary pack from Feelux that enables the Dimline fluorescent fitting to be controlled using 0/1-10V, this allows them to be dimmed by many well known and respected dimming systems such as utron, eax, Rako and Wise ontrols. The interface allows 0 Dimine fittings to be Mains Supply Relay Output Max Input Rako Fluorescent Dimmer External Aerial O 1+ + G- D Dimine/Feeled P + - Dimine Power ord Output ive eutral egative A booster is available to allow an extra rows of 10 Dimine fittings if needed. Product ode ength hannels DIMSIM x 10 Dimine ame Part o. RAKO FUORESET DIMMER RDF800 1 RAKO WA SWITH RP07 FITTIG DS14 DS1 DS8 DS4 DS35 DS39 DS54 S10 S0 DIMIE ITERFAE DIMSIM OUPER DSPT DSPT1 DSPT DSPT4 DSPT6 ORD DSOP OT

8 OT The olourstyle DMX 51 hannel is a feature-rich programmable DMX controller designed to offer comprehensive and intuitive control of all DMX fittings.

6 Mode 1-10V Wired 1-10V RGB olour hange 8 wires to dimmer OD51 BK olour hange 1-10V Dimming Dimine with Grafik Eye - Scene Setting Dimming. Using DMX allows you to mix the fluorescent tubes together, blending the colours to create new colours. A minimum of 3 fluorescent tubes are required to make this work, a Red, a Blue, and a Green. 8 OT The olourstyle DMX 51 hannel is a feature-rich programmable DMX controller designed to offer comprehensive and intuitive control of all DMX fittings. It is ideal for both commercial and residential installations such as restaurants, bars, hotels, modern residential interiors, lightscapes, retail outlets, point-of-sale, illuminated signs and exhibition stands. It also has 3 control outputs, enabling easy control of Dimline Product ode Fitting ength Fitting Fitting Back Box OD51 BK Aluminium 119mm 70mm 37mm 47mm 15V Power Supply Blue Tube Blue Tube Green Tube Green Tube Red Tube RedTube Optional RJ45 Interface to P Switching to ontrol Power to Fitting 0/1-10V interface for dimming Dimine The - 0/1-10V Dimine Interface is the new revolutionary pack from Feelux utron, eax, Rako and Wise ontrols. The interface allows 0 Dimine fittings to be ive eutral egative A booster is available to allow an extra rows of 10 Dimine fittings if needed. Product ode ength hannels DIMSIM x 10 Dimine ame Part o. OOUR DMX51 HAE OD51 DIMIE ITERFAE DIMSIM FITTIGS DS14 DS1 DS8 DS4 DS35 DS39 DS54 S10 S0 OUPER DSPT DSPT1 DSPT DSPT4 DSPT6 ORD DSOP OT

PIR 1-10V 5 wires to dimmer Wired Dimming Sensor EF PIRDD 10VD Dimming Sensor Dimming Sensor with Danlers Switch - Scene Setting Dimming. The PIR Occupancy Switch has a permanent feed to it.

Automatically dim lights according to ambient light level, to maintain constant brightness of between 100 and 1000 lux (adjustable). Adjustable time lag before switching off.

7 PIR 1-10V 5 wires to dimmer Wired Dimming Sensor EF PIRDD 10VD Dimming Sensor Dimming Sensor with Danlers Switch - Scene Setting Dimming. The PIR Occupancy Switch has a permanent feed to it. Power and a control pair are then taken to the interface. eiling flush-mounted PIR occupancy switch with daylight linked dimming. Bring lights on only when area is occupied. Automatically dim lights according to ambient light level, to maintain constant brightness of between 100 and 1000 lux (adjustable). Adjustable time lag before switching off. For suspended or plasterboard ceilings. OT Product ode Diameter utout Timelag EF PIRDD 10VD 7mm 65mm 64mm 10 sec - 40 min O 1 Pir Occupancy Switch Input 1+ + G- D Dimine/Feeled P Dimine Power ord Output 0/1-10V interface for dimming Dimine The - 0/1-10V Dimine Interface is the new revolutionary pack from Feelux utron, eax, Rako and Wise ontrols. The interface allows 0 Dimine fittings to be ive eutral egative A booster is available to allow an extra rows of 10 Dimine fittings if needed. Product ode ength hannels DIMSIM x 10 Dimine ame Part o. PIR OUPAY SWITH EF PIRDD 10VD FITTIGS DS14 DS1 DS8 DS4 DS35 DS39 DS54 S10 S0 DIMIE ITERFAE DIMSIM OUPER DSPT DSPT1 DSPT DSPT4 DSPT6 ORD DSOP OT

LED Panels. We re excited to unveil our new LED Panels. These new LED panels are ideal for commercial use and fit into standard tile grid systems.

LED Panels. We re excited to unveil our new LED Panels. These new LED panels are ideal for commercial use and fit into standard tile grid systems. s s Energy savings up to 80% Zero maintenance Quick & easy installation Complies with Part L 2013 regulations Fully Dimmable IP54 protected against dust & moisture Superior light distribution s We re