GREEN. Boilers. Furnaces. Hot Water Heaters. Stack Economizers. Flue Drains SOLUTION. Your

Transcription

1 Boilers Furnaces Hot Water Heaters Stack Economizers GREEN Your SOLUTION Flue Drains NBT-230 NB-4 V-250 NBT-23 CBM-225 V-250 COMBI The solution for treating the highly acidic condensate produced by today s highly efficient products.

2 About Us Flow ratings based on 99.0% efficiency. Refer to our GPH sheet on our website for flow rates at lower efficiencies. JJM Boiler Works is an industry leader in the design and manufacture of acidic wastewater condensate neutralizing products. Established in 2005, our founder George Carney brought over thirty-six years of heating, hot water, and warm air heating experience to JJM. We offer the industry a solution for handling acidic wastewater produced by today s highly efficient broilers, hot water heaters, furnaces, flue stack drains, and stack economizers. Our products help the engineer, contractor and end user stay in compliance with UPC, IPC, PHCC, EPA, state, and local codes. With over fourteen OEM accounts, JJM products have been well respected in our HVAC industry for over ten years. Our accounts include plumbing wholesalers, HVAC wholesalers, manufacture s representatives, and dealers throughout the U.S., Canada, and Europe. jjmboilerworks.com

3 JMSERIES - INLINE TUBES The JM Inline Series of ph treatment products are designed to raise the ph of acidic liquid produced by condensing furnaces, hot water heaters, direct fired unit heaters, infrared unit heaters, and boilers to a safe level as recognized by national, state and local codes. MBH 225 FLOW RATE/GPH 1.70 CBM or.75.5 or.75 FITTINGS/BRACKETS CLAMPS Horizontal Floor or Wall Clear Tube Provided JM-6 JM-10 JM-20 MBH FLOW RATE/GPH NPT NPT Horizontal MBH 600-1,000 FLOW RATE/GPH NPT NPT Horizontal MBH 1,000-2,000 FLOW RATE/GPH NPT NPT Horizontal JM-30 JM-40 JM-50 MBH 2,000-3,000 FLOW RATE/GPH NPT NPT Horizontal MBH 3,000-4,000 FLOW RATE/GPH NPT NPT Horizontal N/A MBH 4,000-5,000 FLOW RATE/GPH NPT NPT Horizontal N/A jjmboilerworks.com

4 NBSERIES - TANKS The NB Series of ph treatment kits come in twelve different tank sizes, with an input range of 1 to 36,000 MBH. Applied to both small and large capacity boiler rooms and multiple connections to the same neutralizer. All are gravity fed and some models employ pumps and ph monitoring panels with alarms. NBT-23 BO MBH FLOW RATE/GPH BLUE OR LIGHT GREY.75 Socket.75 Socket Tank Floor or Wall The NB-5LP (low profile) is a tank type design to allow for installation with low condensate outlet drains on heating or hot water units. The NB-5LP is field rechargeable by removing the top clean outer cover. Each unit is equipped with eight bags of charging pellets. Recharge kits are available. NBT-610 MBH 1500 MA FLOW RATE/GPH PVC Socket.75 PVC Socket Tank Horizontal Floor NB-5LP MBH 500-5,000 FLOW RATE/GPH NPT NPT VENT PORT.75 NPT Floor NBT-230 MBH 3500 MA FLOW RATE/GPH PVC Socket.75 PVC Socket Tank Horizontal Floor

5 NB-4 NB-6 MBH 500-4,000 FLOW RATE/GPH 32 MA 1 FNPT 1 FNPT VENT PORT.75 FNPT Floor MBH 500-6,000 FLOW RATE/GPH 45 MA 1 FNPT 1 FNPT VENT PORT.75 FNPT Floor NB-7 NB-9 NB-12 MBH 4,000-7,000 FLOW RATE/GPH (2) PARALLEL MOUNTED TANKS 56 MA Tanks Factory Piped Floor/Strut Channel MBH 7,000-9,000 FLOW RATE/GPH (2) PARALLEL MOUNTED TANKS 72.0 MA Tanks Factory Piped Floor/Strut Channel MBH 7,000-12,000 FLOW RATE/GPH (2) PARALLEL MOUNTED TANKS 95 MA Tanks Factory Piped Floor/Strut Channel jjmboilerworks.com

6 NBSERIES - TANKS The NB-6-P is a combination neutralizing tank and self priming pump package. Use in applications where the treated condensate must be moved via pump to a remotely located drain. This model can also be used to separate the heating unit condensate supply from a high volume neutralizing tank with a high outlet port. The NBTI-3200 is a 75 gallon poly tank neutralizer for large capacity mechanical room systems. It is recommended for those systems with total BTU s of over 18,000 MBH. This neutralizer uses Sodium Hydroxide liquid at either 25% or 50% to precisely control ph levels within 5% at all times. Equipment includes (2) ph sensors, (1) metering pump, ph control panel, mixing propeller, BMS capability, isolation tank and pump, along with out of range alarms. NBTI-3200 MBH 32,000 MA FLOW RATE/GPH Standard Or 1-1/4 Option 1 Standard Or 1-1/4 Option ACTIVE INGREDIENT 25% Or 50% Sodium Hydroxide Liquid Floor Only The NB-3600 neutralizing poly tank is designed for high capacity heating systems. This model utilizes our JJM Power Pellets as its active ingredient which are stored within porous polyester bags within the tank for easy servicing and replacement. Equipment include a dual isolation tank and pump package, ph monitor control panel, out of range alarms, BMS capability, ph sensor at the outlet, dual pump controller, steel support frame, standard wall control platform, and option free standing control platform. NB-3600 MBH 36,000 MA FLOW RATE/GPH /4 1-1/4 ISOLATION TANK Dual Pumps ACTIVE INGREDIENT Magnesium Hydroxide Pellets Floor Only

7 VERTICAL MOUNTCANISTERS The V-250 vertical wall mount is designed for wall mounted boiler and hot water heaters. The twist off canister and inner pre-charged pellet cartridge makes for very easy servicing at the time of recharging. V-250 MBH 250 FLOW RATE 1.90 GPH.75 Socket or Barb.75 Socket or Barb Steel Wall Mount Clear Canister REFILL Yes - Cartridge The V-250 Combi is wall or floor mounted. The neutralizer is the same design as our V-250 and is factory mounted with a sump pump/tank for those applications where the treated condensate must be remotely drained. Its poly platform is pre-drilled so the pump and neutralizer can be moved to either the left or right side of the platform. V-250 COMBI MBH 250 FLOW RATE 1.90 GPH.75 Socket or Barb.75 Socket or Barb Clear Canister REFILL Yes - Cartridge PLATFORM Pre Drilled Wall or Floor PUMP LOCATION Left or Right Side PUMP SIZE.5 Gallons Refer to our price books for all single recharge kits and bulk products. jjmboilerworks.com

8 Distributed by CODES: UPC, IPC, EPA, PHCC, MANUFACTURES RECOMMENDATIONS, MANUFACTURES I&O PRODUCT WARRANTY: JJM products are protected by a one year warranty from the date of installation. The warranty applies to the following: All factory defects found in the structure of the inline tubes and poly tanks. Corporate Headquarters JJM Boiler Works, Inc. 69 Ferry Street, Units Easthampton, MA office: fax: Florida Office JJM Boiler Works, Inc Feather Sound Drive Clearwater, FL office: Controls, pumps, sensors, electronics Warranty does not apply to the JJM media. The media should be changed when the outlet port ph falls below 5.0. Warranty does not cover labor. jjmtubes@charter.net JJM Boiler Works, Inc. Revised 12/1/2016