TECHNICAL SPECIFICATIONS
|
|
|
- Damon Wells
- 5 years ago
- Views:
Transcription
1 . MOL Group TECHNICAL SPECIFICATIONS MECHANICAL List of booklets MGS - M - REF M LI Rev This document is property of MOL Group. The use is only allowed with the written permission of MOL Group.
2 . TECHNICAL SPECIFICATIONS - MECHANICAL Rev List of booklets Date: Page/Pages: 2/7 Release list Rev. Date Description Edited Verified Approved Basic release General issue see: sign. sheet see: sign. sheet F. Steiner This document is property of MOL Group. The use is only allowed with the written permission of MOL Group.
3 1. Preface The specifications MGS-M-REF-M of MOL Group Technical specifications - Mechanical is an organic part of MOL Group specification system. Legend: MGS - M/S REF M MGS MOL Group Standards. M MOL Hungary, S Slovnaft a.s. REF Refineries. M Mechanical. The specifications MGS-M-REF-M contains the most important technical requirements specified for design, procurement and installation used for mechanical equipment in MOL Group refineries. The purpose of standard MGS-M-REF-M is to specify and to complete all technical requirements which shall be in line with (laws, government regulations, requirements of directives of European Union, etc.) national and international standards with technical requirements accepted specific needs and MOL experiences in scope of preparation, purchasing, delivery, installation, commissioning, operation, maintenance of mechanical equipment installations in Refineries. Target of standard MGS-M-REF-M is to ensure uniform solution for design and installations of mechanical equipment for new, reconstructed, modernized of integrated company technological objects or only parts of these objects, which are prepared and realized at different conditions and different time horizons. 2. Assignment of obligation Standards of MGS-M-REF-M are obligatory for MOL Group employees, as well as for all external parties, which take part in any process of refining projects, preparation, engineering, delivery, installation, commissioning, operation, maintenance, repairing and installation of relevant technological equipment. 3. Substitution of previous standards Standard MGS-M-REF-M Technical specifications - Mechanical substitutes all previous version of MOL or MOL GROUP standards (MGS-M or MS-M booklets and chapters). Rev /7
4
5 Book Breakdown Book Breakdown Identifier Rev. Technical Specifications Mechanical List of booklets Static equipment (book breakdown) MGS-M-REF-M General requirements MGS-M-REF-M Tanks, separators, columns and reactors MGS-M-REF-M Filters MGS-M-REF-M Fired heaters MGS-M-REF-M Shell and tube heat exchangers MGS-M-REF-M Plate heat exchangers MGS-M-REF-M Air coolers MGS-M-REF-M Atmospheric tanks MGS-M-REF-M Rotary machines (book breakdown) MGS-M-REF-M General requirements MGS-M-REF-M Centrifugal pumps MGS-M-REF-M Positive displacement pump MGS-M-REF-M Centrifugal compressors MGS-M-REF-M Reciprocating compressors MGS-M-REF-M Fans, blowers MGS-M-REF-M Rotary Type Screw Compressors MGS-M-REF-M Steam turbines MGS-M-REF-M Machine monitoring MGS-M-REF-M Piping system (book breakdown) MGS-M-REF-M General requirements MGS-M-REF-M Pipes, Elbows, Reducers, Tees and other fittings MGS-M-REF-M Flanges, Gaskets, Screws and bolts MGS-M-REF-M Gate valves, cocks, valves MGS-M-REF-M Safety valves and rupture disc MGS-M-REF-M Basic pipe classes MGS-M-REF-M Pipe supports MGS-M-REF-M Samplers MGS-M-REF-M Standard piping solutions MGS-M-REF-M Miscellaneous equipment (book breakdown) MGS-M-REF-M Cranes, hoisting machines MGS-M-REF-M Documentation of mechanical engineering (book breakdown) MGS-M-REF-M Requirements on content of project specification MGS-M-REF-M Inquiry and ordering documentation for rotating machines MGS-M-REF-M Data sheet for Centrifugal Pumps MGS-M-REF-M Rev /7
6 Data Sheet for Positive Displacement Pumps MGS-M-REF-M Data Sheet for Centrifugal Compressors MGS-M-REF-M Data Sheet for Reciprocating compressors MGS-M-REF-M Data Sheet for Fans, Blowers MGS-M-REF-M Data Sheet for Rotary type Screw Compressors MGS-M-REF-M Data Sheet for Steam turbines MGS-M-REF-M Inquiry and ordering documentation for static equipment MGS-M-REF-M Data Sheet for Tanks, separator, columns, reactors MGS-M-REF-M Data Sheet for Filters MGS-M-REF-M Data Sheet for Fired heaters and burners MGS-M-REF-M Data Sheet for Shell and tube heat exchangers MGS-M-REF-M Data Sheet for Plate heat exchangers MGS-M-REF-M Data Sheet for Air coolers MGS-M-REF-M Data Sheet for Atmospheric tanks MGS-M-REF-M Data sheet for Safety valves MGS-M-REF-M Data sheet for Rupture disk MGS-M-REF-M Data sheet for Valves MGS-M-REF-M Detailed documentation of mechanical engineering MGS-M-REF-M Detailed documentation of static equipment MGS-M-REF-M Requirement of Vendor documentation for rotating machines MGS-M-REF-M Requirement of Vendor documentation for static equipment MGS-M-REF-M Specifications for design and installation (book breakdown) MGS-M-REF-M Requirements of inspection and checking MGS-M-REF-M Products handover of category 1 MGS-M-REF-M Products handover of category 2 MGS-M-REF-M Products handover of category 3 MGS-M-REF-M Hydrodynamic bearings MGS-M-REF-M Rotating main parts MGS-M-REF-M Driver s electric motors MGS-M-REF-M Compressor s valves MGS-M-REF-M Equipment gaskets MGS-M-REF-M Bolts and nuts above size M45 MGS-M-REF-M Safety valves and rupture disks MGS-M-REF-M Compensators MGS-M-REF-M Furnace piping MGS-M-REF-M Demisters MGS-M-REF-M Reactor, column internals and filter elements MGS-M-REF-M Special valves (>DN250 or >PN40) MGS-M-REF-M Special piping elements MGS-M-REF-M Products handover of category 4 MGS-M-REF-M Tanks, separators, filters, columns, reactors MGS-M-REF-M Fired heaters MGS-M-REF-M Tube bundle MGS-M-REF-M Shell and tube heat exchangers MGS-M-REF-M Air coolers MGS-M-REF-M /7 Rev
7 Atmospheric tanks (above ground) MGS-M-REF-M Centrifugal pumps-api610, EN, ISO MGS-M-REF-M Positive Displacement pumps MGS-M-REF-M Centrifugal compressor MGS-M-REF-M Reciprocating compressor MGS-M-REF-M Fans and blowers MGS-M-REF-M Rotary type positive displacement compressor MGS-M-REF-M Steam turbine MGS-M-REF-M Complete piping system MGS-M-REF-M Special valves DN>250, T>250 MGS-M-REF-M Piping specialities (FCC stand pipe, etc) MGS-M-REF-M Complete unit MGS-M-REF-M Surface protection technology- coating systems MGS-M-REF-M External heat insulation MGS-M-REF-M Steam tracing for equipment and piping MGS-M-REF-M Pressure test and de-pressurising plan MGS-M-REF-M Requirements of handling and maintenance MGS-M-REF-M Rev /7
MOL Group TECHNICAL SPECIFICATION INSTRUMENTATION. List of booklets MGS-M-REF-I-LI. Rev
MOL HUNGRIN OIL ND GS PLC. MOL Group TECHNICL SPECIFICTION INSTRUMENTTION List of booklets MGS-M-REF-I-LI Rev 1.00.01 www.mol.hu This document is property of MOL Group. The use is only allowed with the
Group-1 Agitators. Group-2 Air Conditioning Plant. Group-3 Air Handling Plant / Air Pressurisation System. Group-4 Belts (Conveyor, V & Wedge Belts)
Group-1 Agitators Group-2 Air Conditioning Plant Group-3 Air Handling Plant / Air Pressurisation System Group-4 Belts (Conveyor, V & Wedge Belts) Group-5 Boiler Pressure Parts / Bowl Mills Parts (Developed
TITLE: SPECIFICATION NO. PE-MSE-VD-ACC VOLUME:
(For Vendor Registration Purpose) SHEET 1 of 6 1.00.00 GENERAL INFORMATION 1.01.00 The general guidelines as illustrated in the subsequent clauses of this section shall be applicable for air cooled condenser
ISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 10438-1 Second edition 2007-12-15 Petroleum, petrochemical and natural gas industries Lubrication, shaft-sealing and control-oil systems and auxiliaries Part 1: General requirements
SECTION GENERAL-SERVICE COMPRESSED-AIR SYSTEMS
PART 1 GENERAL 1.01 SECTION INCLUDES A. Pipe and Pipe Fittings. B. Air compressor. C. Air receiver and accessories. D. Aftercooler. E. Refrigerated air dryer. F. Pressure reducing station. 1.02 RELATED
PIPING SYSTEM EQUIPMENTS
PIPING SYSTEM EQUIPMENTS Introduction Equipments are devices that provide power, process and store materials. Equipments in piping systems depend on the specific industries using them. Specialized equipment
ENGINEERING SPECIFICATION ASU TYPE NITROGEN GENERATION UNIT FOR DIESEL HYDROTREATER UNIT FOR HINDUSTAN PETROLEUM CORPORATION LTD.
ENGINEERING SPECIFICATION FOR DIESEL HYDROTREATER UNIT FOR HINDUSTAN PETROLEUM CORPORATION LTD. VISAKH REFINERY DHT PROJECT TEIL JOB NO. : 6261 DOCUMENT NO: 6261- A - 95-48 -051 A 16-March-09 For Client
ClearFire Economizer Model ECF Integral or External. Addendum to manuals CFH and CFV
ClearFire Economizer Model ECF Integral or External Addendum to manuals 750-295 CFH and 750-269 CFV CB-8466 08/2011 1-GENERAL The Model ECF economizer is a stainless steel coil tube arrangement using
ALTAIR II CONVECTION STEAM COOKER PARTS AND SERVICE MANUAL
ALTAIR II CONVECTION STEAM COOKER PARTS AND SERVICE MANUAL EFFECTIVE MAY, 0 Superseding All Previous Parts Lists. The Company reserves the right to make substitution in the event that items specified are
Design and analysis of the piping systems
Design and analysis of the piping systems Over all schematic diagram of the total system along with equipment and connecting piping is shown in Fig.. Different piping systems are described as follows:.
Chapter 1 Preface & General
Chapter 1 Preface & General Copy Right By: Thomas T. S. Wan 温到祥著 Sept. 3, 2008 All rights reserved Preface: This manual is intended for someone who has the prior basic education of refrigeration and has
Module 3: Liquid Fossil Fuel (Petroleum) Lecture 25: Refinery Equipments
1 P age Module 3: Liquid Fossil Fuel (Petroleum) Lecture 25: Refinery Equipments 2 P age Keywords: Pipe still heater, heat exchangers, distillation tower, pumps Refinery equipments Introduction In refinery,
Ultra-sorb Models LV and LH
Ultra-sorb Models LV and LH Steam Dispersion Panels Installation, Operation, and Maintenance Manual For applications using steam from a boiler or from any DRI-STEEM steam generating humidifier. Overview
Model: 1200 Model: 1200-G Model: 1200-N Float-Controlled Condensate Trap, PN 40
1 Safety instructions Model: 1200 Model: 1200-G Model: 1200-N Float-Controlled Condensate Trap, PN 40 1.1 Proper use Any improper use, intervention in the design and deviation from the design data automatically
Chapter 4 Compressors Overview & System Annual Power Consumption
Chapter 4 Compressors Overview & System Annual Power Consumption Copy Right By: Thomas T.S. Wan 温 Sept. 3, 2008 All rights reserved (Cor. 07-08-12) Compressor is the heart of the refrigeration system.
MODEL ANSWER FOR ELEMENTS OF MECH.ENGG.(17413) 1) steam boiler- It is a closed vessel in which steam is produced from water by combustion of fuel.
MODEL ANSWER FOR ELEMENTS OF MECH.ENGG.(17413) Q 1. a) 1) steam boiler- It is a closed vessel in which steam is produced from water by combustion of fuel. 2) steam turbine- It is a device that extract
INSTALLATION INSTRUCTIONS
MASTERTEMP & MAX-E-THERM HEATER DIRECT AIR INTAKE DUCT WITH 3-INCH PVC PIPE KIT MASTERTEMP HEATER [KIT P/N 461031) MASTERTEMP 125 HEATER [KIT P/N 474845) MAX-E-THERM HEATER [KIT P/N 475002) INSTALLATION
We are pleased to offer products covering a multitude of SIC Code categories:
We are pleased to offer products covering a multitude of SIC Code categories: Mechanical Power Transmission Equipment 3010 Torque Converters and Speed Changers 3020 Gears, Pulleys, Sprockets, and Transmission
Installation, Operation and Maintenance Instructions for Thermax Semi-Storage Calorifier
OM001 Installation, Operation and Maintenance Instructions for Thermax Semi-Storage Calorifier These operating and maintenance instructions are for standard semi-storage calorifiers (vessels fitted with
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y LS BARGE PUMP. Vertical high-flow pump
N N O V A T I O N E F F I C I E N C Y Q U A L I T Y LS BARGE PUMP LS BARGE For more than 60 years the name Ruhrpumpen has been synonymous worldwide with innovation and reliability for pumping technology
CAP SERIES SEWAGE AND WASTE WATER PUMPS
Part 8 CAP SERIES SEWAGE AND WASTE WATER PUMPS TECHNICAL SPECIFICATIONS : Turbosan CAP series consists of centrifugal sewage and waste water pumps. They are used for pumping muddy liquids like sewage and
Operating Manual. Model: Float-Controlled Condensate Trap, PN Safety instructions. 2 General description and usage
Model: 1090 1 Safety instructions Float-Controlled Condensate Trap, PN 16 1.1 Proper use Any improper use, intervention in the design and deviation from the design data automatically lead to termination
PRODUCT INFORMATION. Liquid ring vacuum pumps Liquid ring compressors. Series LVP
PRODUCT INFORMATION Liquid ring vacuum pumps Liquid ring compressors Series LVP Contents Description Description... 2 Design... 3 Application range... 4 Material and performance range... 5 Functional principle...
Permutadores de calor
refrigerados a água - Hypercool Aftercoolers can be installed immediately downstream of compressors or blowers in order to remove over 80 % of the condensate. Their function is to protect the entire compessed
MINIMUM TANK GAP. Greater of 3 or one-sixth of sum of adjacent tank diameters. one-half of sum of adjacent tank diameters 20
Piping Layout Design Introduction The performance requirements of the equipment are developed by design teams which normally include members from the different departments such as process, engineering,
OPERA MORE. Use. Range. Drycoolers Air-cooled condensers. for LESS. Capacity: up to 1100 kw. Water misting. Free cooling
MORE n More efficient n More flexible n More intelligent for LESS n Less energy n Less time n Less noise Capacity: up to 1100 kw 410A 407C 134a 404A Free cooling Water misting Use The range, available
MCF 500 CENTRIFUGAL FAN FOR AIR, FOR BIOGAS, LANDFILL AND NATURAL GAS
MCF 00 CENTRIFUGAL FAN FOR AIR, FOR BIOGAS, LANDFILL AND NATURAL GAS MCF 00 CENTRIFUGAL FAN FOR COMBUSTIBLE GASES MCF 00 centrifugal fan for biogas, natural gas or combustible gases, in conformity to the
+91-8071681962 Pioneer Engineering Works http://www.heatexchangerpioneer.com/ We are engaged in Industry of Manufacturing & Supplying of heat exchangers, oil coolers, heat exchangers in Coimbatore, oil
ISO INTERNATIONAL STANDARD. Petroleum, petrochemical and natural gas industries Rotary-type positivedisplacement. Part 1: Process compressors
INTERNATIONAL STANDARD ISO 10440-1 Second edition 2007-08-01 Petroleum, petrochemical and natural gas industries Rotary-type positivedisplacement compressors Part 1: Process compressors Industries du pétrole,
opening trap 30 mm Space required for Space required for opening trap 30 mm MK 45-1 with flanged ends (to DIN)
Issue Date: 4/06 GESTRA Steam Systems Thermostatic Steam Traps MK 45-, MK 45-2 PN 40, DN 5, 20, 25 (½", ¾", ") Product Range A MK 45- MK 45-2 Description Thermostatic steam trap with membrane regulator.
Abu Dhabi Conformity Assessment Scheme for Fire Pumps
Abu Dhabi Conformity Assessment Scheme for Fire Pumps Assessment and Surveillance Plan Page i TABLE OF CONTENTS DEFINITIONS... 1 1 ABOUT THE ABU DHABI QUALITY AND CONFORMITY COUNCIL... 2 2 FOREWORD...
Model AV Alarm Valve With and Without Model RC-1 Retard Chamber European Conformity Valve Trim General Description
Worldwide Contacts www.tyco-fire.com Model AV--00 Alarm Valve With and Without Model RC- Retard Chamber European Conformity Valve Trim General Description The TYCO Model AV--00 Alarm Valves DN, DN0, DN0,
COMBUSTION AIR SYSTEM
COMBUSTION AIR SYSTEM MODEL: CAS-2WM WEIL-MCLAIN OUTSIDE AIR KIT FOR USE WITH OIL BURNER MODELS QB-180 & QB-300 4" VRV 4" IAH HOOD AIR BOOT TM The Air Boot model CAS-2WM is for use only on the designated
Heavy Duty Process Pumps API 610/ISO 13709
TM.P. S.p.A. Termomeccanica Pompe Heavy Duty Process Pumps API 610/ISO 13709 Termomeccanica Group Tradition, technology & innovation TM.P. S.p.A - Termomeccanica Pompe belongs to Termomeccanica S.p.A,
Presentation on HVAC: Heating Ventilation Air Conditioning
Presentation on HVAC: Heating Ventilation Air Conditioning CHITKARA UNIVERSITY CHITKARA SCHOOL OF MECHANICAL ENGINEERING ;HARVINDER SINGH HVAC Heating, Ventilation and Air Conditioning Provides comfort
This label warns for risk of electrical shock when failing to observe.
MANUAL horizontal centrifugal pumps MB series ic drive SB series mechanical seal 1. Introduction 2. Safety precautions 3. Receipt 4. Installation / Operation and Maintenance 4.1 Installation 4.2 Operation
Enviro KES INSTALLATON MANUAL
Enviro KES INSTALLATON MANUAL Spring Air Systems Inc., Oakville, Ontario Phone (905) 338-2999, Fax (905) 338-0179, info@springairsystems.com www.springairsystems.com KES Installation Manual. This publication
ISO INTERNATIONAL STANDARD. Hydrogen generators using fuel processing technologies Part 1: Safety
INTERNATIONAL STANDARD ISO 16110-1 First edition 2007-03-15 Hydrogen generators using fuel processing technologies Part 1: Safety Générateurs d'hydrogène utilisant les technologies de traitement du carburant
Instruction Manual, Toftejorg Rotary Spray Heads Toftejorg MultiMidget, Toftejorg MultiMagnum
Instruction Manual, Toftejorg Rotary Spray Heads Covering Standard version ESE02746EN Date of issue: April 29, 2014 First published: April 29, 2014 Original manual Contents Contents... 1 Toftejorg Rotary
12711 TOWNEPARK WAY / LOUISVILLE, KY / / FAX
12711 TOWNEPARK WAY / LOUISVILLE, KY 40243 800-665-4251 / 502-962-2883 / FAX 502-244-4046 THERMAL FLUID SYSTEM SPECIFICATIONS Items appearing in red are vendor data that is required with proposal. 1. Thermal
Level Electrode NRG Original Installation Instructions English
Level Electrode NRG 16-36 EN English Original Installation Instructions 819257-01 Contents Contents Page Important notes Usage for the intended purpose...4 Function...4 Safety note...4 Directives and standards
KINNEY OIL MIST ELIMINATORS
KINNEY OIL MIST ELIMINATORS Models: A B, B1 & B2 C1 D & D1 Instruction Manual 1855-1 Revision 12/01 TABLE OF CONTENTS DESCRIPTION... 1 OPERATION... 1 ELEMENTS... 2 OIL RETURN METHODS... 3 DIRECT DRAIN
PIP PNE00004 Steam Trap Guidelines
July 2016 Piping PIP PNE00004 Steam Trap Guidelines PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from
HEAT EXCHANGE INSTITUTE, INC.
HEAT EXCHANGE INSTITUTE, INC. STANDARDS for STEAM SURFACE CONDENSERS ELEVENTH EDITION Copyright October 2012 by Heat Exchange Institute 1300 Sumner Avenue Cleveland, Ohio 44115-2851 Reproduction of any
Model: 1100 Float-Controlled Condensate Trap, PN 25
1 Safety instructions Model: 1100 Float-Controlled Condensate Trap, PN 25 1.1 Proper use Any improper use, intervention in the design and deviation from the design data automatically lead to termination
Centrifugal Pumps acc. to DIN EN ISO 2858 with Shaft Sealing Type NCL
Centrifugal Pumps acc. to DIN EN ISO 2858 with Shaft Sealing Type NCL General The DICKOW centrifugal pump, type NCL, is designed for handling liquids in the chemical and petrochemical industry, in refineries,
ROTARY VANE VACUUM PUMPS Exploded View DuraVane Rotary Vane Pumps Oil-Lubricated RVL301HH
Exploded View Pumps RVL0HH 95 SOUTH WOODLAND AVENUE, MICHIGAN CITY, IN 0-57 Please visit our website at Page Number Reference TOLL-FREE: 888-95-5 TEL.: 9-8-0 FAX: 9-8-0 www.dekkervacuum.com DWG //05 RVL0HH
SEMI-HERMETIC SCREW COMPRESSORS
SEMI-HERMETIC SCREW COMPRESSORS 50 Hz // SP-00-5 EN HS.53 // HS.64 // HS.74 // HS.5 // HS.95 WITH IQ MODULE BIGGER MODELS BITZER Innovation Targets Semi-hermetic screw compressors Products for refrigerants
Module 5: Combustion Technology. Lecture 38: Combustion Burners
1 P age Module 5: Combustion Technology Lecture 38: Combustion Burners 2 P age Keywords : Atmospheric burner, atomizer, rotating cup burner, swirl type burner, nozzle design 5.7 Combustion Burners Types
Standard for 2006 Performance Rating Of Positive Displacement Ammonia Compressors and Compressor Units
ANSI/AHRI Standard 510-2006 (Formerly ARI Standard 510-2006) Standard for 2006 Performance Rating Of Positive Displacement Ammonia Compressors and Compressor Units Price $10.00 (M) $20.00 (NM) Printed
24 VAC SYSTEM CONTROL KIT
24 VAC SYSTEM CONTROL KIT Model: CK-43 Tubing MG1 Barometric Draft Control The CK-43 is designed for use with the SWG Series Power Venter for controlling Natural Gas and L.P. Gas Draft Induced appliances.
ASSSIGNMENT 3. Textbook Assignment: Boilers, chapter 4, pages 4-1 through 4-15, and Steam Turbines, chapter 5, pages 5-1 through 5-1.
ASSSIGNMENT 3 Textbook Assignment: Boilers, chapter 4, pages 4-1 through 4-15, and Steam Turbines, chapter 5, pages 5-1 through 5-1. 3-1. What is the function of a boiler in the steam cycle? 1. To convert
CRU 200 and 500 Series Condensate Recovery Units
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
The rotary type compressor consists of an integrally formed rotor and shaft, five vanes, and a cylinder.
W1860BE.book Page 12 Tuesday, January 28, 2003 11:01 PM 2. Cooling System A: COMPRESSOR The rotary type compressor consists of an integrally formed rotor and shaft, five vanes, and a cylinder. As the rotor
Technical Data TYPE T14 & T14D TEMPERATURE PILOT SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY SD 4511A T14 PILOT
Technical Data SD 4511A SPENCE ENGINEERING COMPANY, INC. 150 COLDENHAM ROAD, WALDEN, NY 12586-2035 TYPE T14 & T14D TEMPERATURE PILOT PRINTED IN U.S.A. SD 4511A/9811 5 13 /16 D 4 7 /8 1 13 /16 T14 PILOT
Operating Manual. Model: 1400 Model: 1400-N RIFOmat Float-Controlled Condensate Traps, PN Safety instructions. 2 General description and use
1 Safety instructions 1.1 Proper use Model: 1400 Model: 1400-N RIFOmat Float-Controlled Condensate Traps, PN 100 Any improper use, intervention in the design and deviation from the design data automatically
International Reactor Bulletin 1100 Corporation. Standard and Custom Reactors for the Chemical Process Industries
International Reactor Bulletin 1100 Corporation Standard and Custom Reactors for the Chemical Process Industries 2 International Reactor Corporation 521 Kiser Street Dayton, Ohio 45404-1641 Phone: 937-224-4444
24 VAC SYSTEM CONTROL KIT Model: CK-91F and CK-91FG
24 VAC SYSTEM CONTROL KIT Model: CK-91F and CK-91FG Designed for use with the SWG Series Power Venter for controlling Natural Gas or L.P. Gas draft induced appliances with a 24 VAC Gas Valve and a 30-millivolt
Borosilicate 3.3 Glass Pilot plants / Equipment
Borosilicate 3.3 Glass Pilot plants / Equipment Pilot Plants / Assemblies are multi purpose units having flexibility of utility. These units have been standardized by incorporating all basic & essential
1. Raw Material Handling: 2. Roaster Furnace: 4. Waste Heat Boiler: 5. Boiler Chain Conveyors:
1. Raw Material Handling: The concentrate storage capacity is 40,000 MT and day bins are having 3 x 400 MT capacity. 2. Roaster Furnace: The Roaster is having 77 Sqr.Mtr hearth area of M./s Lurgi make
Model: 1413 Model: 1418 Float-Controlled Condensate Trap, PN 100
1 Safety instructions Model: 1413 Model: 1418 Float-Controlled Condensate Trap, PN 100 1.1 Proper use Any improper use, intervention in the design and deviation from the design data automatically lead
TJERNLUND PRODUCTS, INC.
TJERNLUND PRODUCTS, INC. 1601 Ninth Street White Bear Lake, MN 55110-6794 PHONE (800) 255-4208 (651) 426-2993 FAX (651) 426-9547 Visit our web site www.tjernlund.com PRESSURE SWITCH AND INSTALLATION WITH
DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION PUMPS
PART 0 A/E INSTRUCTIONS 0.01 Design Requirements A. Pumping system design 1. A primary-secondary pumping system is preferred. Redundant pipes are required for chillers and boilers. 2. Select pumps to operate
PhiloWilke Partnership Addendum No. 2 A/E Project No April 2016
SECTION 23 21 23 PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General Conditions and Division 01 Specification Sections, apply to this Section.
Installation of Glass Lined Equipment
Installation of Glass Lined Equipment Information given herein is for guidance only and may not be complete. It is important that only trained and competent personnel are permitted to handle glass lined
GESTRA Steam Systems DK 45. English. Installation Instructions Steam Trap DK 45
GESTRA Steam Systems DK 45 EN English Installation Instructions 818676-00 Steam Trap DK 45 1 Contents Important Notes Page Usage for the intended purpose...4 Safety note...4 Danger...4 Attention...4 PED
SIZING HANDBOOK & APPLICATION GUIDE
SIZING HANDBOOK SIZING HANDBOOK & APPLICATION GUIDE Chimney & Gas Vent For Capacities to 100 Million B.T.U. The primary aim of this Sizing Handbook is to provide more detailed guidance on appliance venting
ENTROPIE boiler TT100-01
ENTROPIE boiler TT100-01 1000 16500 kw 140 о С 8,5 bar Сontents Field application TT100-01 boilers... 36 Diagram of ENTROPIE boiler TT100-01... 36 Technical characteristics of boilers TT100-01... 37 Overall
24 VAC SYSTEM CONTROL KIT
24 VAC SYSTEM CONTROL KIT Model: CK-91F and CK-91FG Designed for use with the SWG Series Power Venter for controlling Natural Gas or L.P. Gas draft induced appliances with a 24 VAC Gas Valve and a 30-millivolt
ECOJET EJ-10E & EJ-7E ELECTRIC CONVECTION STEAMER W/TWIN GENERATORS PARTS AND SERVICE MANUAL
ECOJET EJ-10E & EJ-7E ELECTRIC CONVECTION STEAMER W/TWIN GENERATORS PARTS AND SERVICE MANUAL EFFECTIVE JULY 31, 2014 Superseding All Previous Parts Lists. The Company reserves the right to make substitution
Level Electrode NRG NRG Original Installation Instructions English
Level Electrode NRG 10-52 NRG 16-52 EN English Original Installation Instructions 819123-02 Contents Important notes Page Usage for the intended purpose...4 Function...4 Safety note...4 Directives and
FLOAT AND THERMOSTATIC STEAM TRAPS FLT17 (DN 1/2 to 1 ; DN15 to DN25)
LOAT AND THERMOSTATIC STEAM TRAPS LT17 (DN 1/2 to 1 ; DN15 to DN25) DESCRIPTION LT17 float and thermostatic (integral air vent) steam traps series are designed for all types of low and high pressure steam
Oil burners fuel unit with solenoid valve
Oil burners fuel unit with solenoid valve Type VM www.deltapumps.com VM1 - VM4U flanged Certified Quality System Printed in Italy - DE112/0404 Oil burners fuel unit with solenoid valve Type VM The DELTA
BORSIG WASTE HEAT BOILERS FOR NITRIC ACID, CAPROLACTAM AND FORMALDEHYDE PLANTS PROCESS HEAT EXCHANGER. A Member of KNM Group Berhad
BORSIG PROCESS HEAT EXCHANGER WASTE HEAT BOILERS FOR NITRIC ACID, CAPROLACTAM AND FORMALDEHYDE PLANTS A Member of KNM Group Berhad The Company BORSIG Process Heat Exchanger GmbH (a member of the BORSIG
LIST OF STANDARDS S. NO. STANDARD NO. STANDARD NAME. Recommended Practices on Oil Storage and Handling OISD-STD-109
LIST OF STANDARDS S. NO. STANDARD NO. STANDARD NAME 1. OISD-STD-105 Work Permit System 2. OISD-STD-106 Pressure Relief & Disposal System 3. OISD-RP-108 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17.
Ball Float Steam Trap with Integral Spiratec Sensor and Flanged Connections
Page 1 of TI-P615-03 ST Issue IFT57 SG Iron ISO 9001 Ball Float Steam Trap with Integral Spiratec Sensor and Flanged Connections Cert. No. LRQ 0963008 IFT57H DN0 (horizontal shown) DN15 (vertical shown)
Centrifugal Chiller. GFG-S/SIT Series GXG-S/SIT Series GSG-S/SIT Series
Centrifugal Chiller High Efficiency GFG-S/SIT Series GXG-S/SIT Series GSG-S/SIT Series Centrifugal Chiller High Efficiency Centrifugal Chiller HC-F-GFG-SSC Series (Super High Efficiency Type) HC-F-GXG-S
Waste Heat Recovery Using the Example of Slag Fuming
Waste Heat Recovery Using the Example of Slag Fuming Waste Heat Recovery Using the Example of Slag Fuming Stefan Köster 1. Introduction...329 1.1. Waste Heat Recovery downstream Ausmelt Process...330 1.2.
PREVIEW COPY. Compressors. Table of Contents. Introduction to Compressors...3. Lesson Two Reciprocating Compressors...21
Compressors Table of Contents Lesson One Introduction to Compressors...3 Lesson Two Reciprocating Compressors...21 Lesson Three Rotary, Helical, and Scroll Compressors...37 Lesson Four Centrifugal Compressors...51
PIP RESR001 Packaged, Skid-Mounted Industrial Process Refrigeration Systems Specification
EDITORIAL REVISION October 2010 Process Industry Practices Machinery PIP RESR001 Packaged, Skid-Mounted Industrial Process Refrigeration Systems Specification PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES
Wet alarm valve stations
VdS Guidelines for water extinguishing systems VdS 2100-01en Requirements and test methods VdS 2100-01en : 2011-05 (02) Publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174 50735 Köln,
FAN PERFORMANCE AND UTILIZATION OF COMPRESSED AIR IN THERMALPOWERPLANT
FAN PERFORMANCE AND UTILIZATION OF COMPRESSED AIR IN THERMALPOWERPLANT V Hari Kiran 1, K Uday Kiran Kumar 2, M M Praveen Kumar 3 1 Asst.Proffessor, Avanthi Institute Of Engineering And Technology, Makavaripalem,
Installation Instructions
Condensing Heat Exchanger Kit Cancels: IIK 8A-- IIK 8A--7 -- Installation Instructions Part No. 171-7 through -7 NOTE: Read the entire instruction before starting the installation. INTRODUCTION This instruction
POWER VENTER SYSTEM. Model: PVO-300, PVO-600
POWER VENTER SYSTEM Model: PVO-300, PVO-600 Included is one ETL and cetl listed Power Venter to be used primarily with a single 120VAC controlled oil fired furnace, boiler, or water heater. The PVO may
Operation Manual R205BV, R209BV
Operation Manual R205BV, R209BV 1 Safety Instruction The rotary evaporator is manufactured according to current methods and accepted safety regulations. However, risks still exist during the installation,
Roof top SPACE RPC 315Z R407C MA00
Client : TIHE SERV Contact : Romeo Staicu Your reference : Your contact : Phone : E-mail : Page : 1 / 6 Roof top SPACE RPC 315Z R407C MA00 Independant roof mounted unit, cooling only, ready to be installed,
Refrigeration & Air Conditioning Experiment No. 5. Experiment No. 5
Refrigeration & Air Conditioning Experiment No. 5 1.0 Title of the experiment: - Experiment No. 5 Dismantling and assembly of hermetically sealed compressor. 2.0 Prior Concepts: - Compressor function in
Di-440 The Modular Analyser
Di-440 The Modular Analyser Instrument Concept Single tool for a range of service, maintenance and inspection applications: Condition assessment tool highlights state of machinery today NOT for Predictive
INTRODUCTION. NOTE: Read the entire instruction manual before starting the installation. FIRE, EXPLOSION, ELECTRICAL SHOCK HAZARD
Installation Instructions NOTE: Read the entire instruction manual before starting the installation. SAFETY CONSIDERATIONS Improper installation, adjustment, alteration, service, maintenance, or use can
Installation Instructions Part No , Part No Part No
Torsion-Flex Motor mount for PSC motors and Rigid-Mount for ECM motors Replacement Kit Cancels: New Installation Instructions Part No. 327752-401, Part No. 327753-401 Part No. 327754-401 IIK-310A-45-11
CNS CENTRIFUGAL MULTISTAGE WATER DESCALING PUMPS BB4 TYPE API 610 ENGINEERING FLOW SOLUTIONS
CNS CENTRIFUGAL MULTISTAGE WATER DESCALING PUMPS BB4 TYPE API 610 ENGINEERING FLOW SOLUTIONS CNS Pumps For Water Descaling Description The CNS series pumps are centrifugal, multistage, horizontal, with
!!! Sample Written Program For Your Company. For BOILER SAFETY. Provided By:!!!
Sample Written Program For Your Company For BOILER SAFETY Provided By: P.O. Box 2136 Slidell, LA 70458 Phone: 985-781-1444 Fax: 985-781-1446 Email: info@se-safety.com Purpose Boiler Safety Program The
Technical Data. Sizes 2 in. (DN50) to 16 in. (DN400) Approvals UL and ULC Listed FM Approved
Worldwide Contacts www.tyco-fire.com Model TJR Resilient-Seated Gate Valves Outside Screw and Yoke General Description TYCO Model TJR Resilient-Seated Gate Valves are used in Fire Protection Systems for
Technical Development Program
Technical Development Program COMMERCIAL HVAC CHILLER EQUIPMENT Water-Cooled Chillers PRESENTED BY: Omar Rojas Sales Engineer Menu Section 1 Section 2 Section 3 Section 4 Section 5 Section 6 Section 7
SANTA ROSA FIRE DEPARTMENT FIRE PREVENTION BUREAU PLAN REVIEW CHECKLIST
July 1, 2010 SANTA ROSA FIRE DEPARTMENT FIRE PREVENTION BUREAU PLAN REVIEW CHECKLIST FIRE PUMP REVIEW Address: Permit #: Inspector: Date: Status: Inspector: Date: Status: A-Approved; AC-Approved w/comments;
Heat Exchangers Selection Rating And Thermal Design Second Edition
Heat Exchangers Selection Rating And Thermal Design Second Edition HEAT EXCHANGERS SELECTION RATING AND THERMAL DESIGN SECOND EDITION PDF - Are you looking for heat exchangers selection rating and thermal
F-P, F-L, FT-P AND FT-L SERIES 2/3 JACKETED DIRECT STEAM TILTING & STATIONARY KETTLES PARTS AND SERVICE MANUAL
F-P, F-L, FT-P AND FT-L SERIES 2/3 JACKETED DIRECT STEAM TILTING & STATIONARY KETTLES PARTS AND SERVICE MANUAL EFFECTIVE NOVEMBER 2, 2015 Superseding All Previous Parts Lists. The Company reserves the
Vapor thermocompressor. Stills
Vapor thermocompressor Stills STILMAS Stilmas is an industrial and engineering Company specialized in the research, design, development and construction of high technology plants for the pharmaceutical,
(Publication of titles and references of harmonised standards under Union harmonisation legislation) (Text with EEA relevance) (2015/C 335/02)
C 335/10 EN Official Journal of the European Union 9.10.2015 Commission communication in the framework of the implementation of Directive 94/9/EC of the European Parliament and of the Council of 23 March
LC Series - Light Commercial Pump Station Installation and Operation Manual
LC Series - Light Commercial Pump Station Installation and Operation Manual Please keep this manual with the pump station Content Rain Bird LC Series Overview... Safety Instruction... Operation... 3 Pump