Model SS20. EdcoParts.com An ibuy Stores Company PARTS LIST MANUAL 20 & 16 SELF-PROPELLED CONCRETE & ASPHALT SAWS.
|
|
|
- Ira Douglas
- 5 years ago
- Views:
Transcription
1 PARTS LIST MANUAL REVISED STARTING SERIAL # Model SS20 Model SS20-20H Model SS20-3H 20 & 6 SELF-PROPELLED CONCRETE & ASPHALT SAWS SKU # SIZE POWER OPTION SS20-20H 20 HONDA GASOLINE ENGINE MODEL GX630 SS20-25P 20 KOHLER COMMAND PROPANE ENGINE MODEL CH730 SS20-3H 6 HONDA GASOLINE ENGINE MODEL GX390 MODEL # 00 Thomas Johnson Drive, Frederick, MD USA Printed in USA JWA Website: sales@edcoinc.com 203 Page
2 ILLUSTRATION : FRAME GROUPING
3 PARTS LISTING - ILLUSTRATION : FRAME GROUPING 5290 MAIN FRAME AXLE 3/4DIA. X 7-3/8L COLLAR, LOCKING 3/4 ID WHEEL 8 X 2 X 3/4 BRG, SBR RUBBER WASHER.755 ID X.25 OD X.060 THK WASHER, LOCK /2 ZINC SCREW, CAP /2-20 X FORK W/ PIVOT TUBE WASHER, FLAT 3/4 SAE ZINC WHEEL 4 X -/2 X 3/4 BRG. ALUM/RUB PIN, COTTER 3/6 X -/ SHAFT 3/4 DIA. X 9 L SCREW, CAP /2-20 X 2-/ NUT, HEX NYLON LOCK /2-20 ZINC LINKAGE, CUT CONTROL FITTING, GREASE /4-28 STRAIGHT HANDWHEEL, LRG. W/ 5/8-8 X 3 ROD KNOB, BALL -3/8 W/ /2-3THD, BLK SLEEVE F/ /2 CAPSCREW, TAPERED SCREW, SKT. HD. CAP /2-3 X 4-/ BEARING, THRUST BALL 5/ WASHER, FLAT 5/8 SAE ZINC COLLAR, LOCKING 5/8 ID CONSOLE DEPTH LOCK, SS BOLT, CARRIAGE 5/6-8 X FULL THD WASHER, FLAT 5/6 SAE ZINC NUT, HEX NYLON LOCK 5/6-8 ZINC CONSOLE, SS20-20H & SS20-3H 5203P CONSOLE, SS20-25P WASHER, FLAT 5/6 SAE ZINC WASHER, LOCK 5/6 ZINC SCREW, CAP 5/6-8 X 3/ GROMMET -45/64ID X /8GRV. X 2GD GROMMET 3/8ID X /8GRV. X 5/8GD ROPE CLEAT, NYLON JAM 3/6-5/ SCREW, MACHINE 0-32 X 5/8, SLT.FLT WASHER, FLAT #0 SAE ZINC NUT, KEPS LOCK 0-32 ZINC HANDLE BAR 24, ZINC PLATED GRIP, HAND MODEL AT PIN, DETENT RING 3/6 X -5/6 E.L KNOB, STAR CLAMPING 3/8-6 X STD ROPE, GUIDE BAR, SS BAIL, LIFTING, SS SCREW, CAP 3/8-24 X WASHER, FLAT 3/8 SAE ZINC WASHER, LOCK 3/8 ZINC NUT, HEX 3/8-24 ZINC COVER, BELT, SS-20 HONDA 5205K COVER, BELT, SS-20 KOHLER SCREW, CAP /4-20 X 3/ WASHER, LOCK /4 ZINC WASHER, FLAT /4 SAE ZINC COVER, ARBOR SCREW, CAP 3/8-6 X 3-3/ WASHER, LOCK 3/8 ZINC WASHER, FLAT 3/8 SAE ZINC GUIDE BAR PLUG, SQ. TUBE X 4 GA., BLACK WHEEL 4 X -3/8 X 3/8 BORE WASHER, FLAT 3/8 SAE ZINC NUT, HEX NYLON LOCK 3/8-6 ZINC GUIDE POINTER, FRONT SCREW, CAP /2-3 X NUT, HEX NYLON LOCK /2-3 ZINC GUIDE POINTER, REAR SCREW, CAP /4-20 X /2 ZINC
4 ILLUSTRATION 2: ARBOR & 20 BLADE GUARD GROUPING MODELS SS20-20H & SS20-25P
5 PARTS LISTING - ILLUSTRATION 2 : ARBOR & 20 BLADE GUARD GROUPING 56208C ARBOR ASSY. W/ 4 GROOVE SHEAVE (INCLUDES ITEMS 2 THRU ) ARBOR SHAFT 23-3/8 L BEARING, BALL TPB KEY /4SQ X 2-/ BUSHING, SHEAVE SH X BORE SHEAVE 3.65 OD X 4GR.3V X SH 7 02 PIN, ROLL 5/6 X ARBOR BACKING PLATE ARBOR BLADE CAP 4 OD W/ HOLE WASHER, LOCK, INT. TOOTH NUT, HEX JAM -4 ZINC GRADE A SCREW, CAP 3/8-6 X 3/ WASHER, LOCK 3/8 ZINC WRENCH, ARBOR, -/2 OPEN END C BLADE GUARD ASSEMBLY 20 (INCLUDES ITEMS 6, 7, AND 8) BLADE GUARD NOZZLE, COOLANT /8MPT W/ 6 TUBES BARB ELBOW 90, 3/8HOSE X /8MPT SCREW, CAP /2-20 X 4-/ WASHER, LOCK /2 ZINC SCREW, CAP 3/8-6 X WASHER, LOCK 3/8 ZINC WASHER, FLAT 3/8 SAE ZINC HOSE, WATER 3/8 ID X 46 L CLAMP, HOSE, SAE #6, ADJ. TO 3/ BARB, 3/8 HOSE X /4MPT (BRASS) PIPE TEE, FEMALE /4 NPT (BRASS) BUSHING, HEX /4 X /8 NPT (BRASS) SWITCH, PRESSURE, N/O (MODEL SS20-20H) SWITCH, PRESSURE, N/C (MODEL SS20-25P) SWITCH, TOGGLE SPDT (MODEL SS20-20H) SWITCH, TOGGLE SPST (MODEL SS20-25P) NIPPLE, HEX /4 NPT (BRASS) BUSHING, HEX /2 X /4 NPT (BRASS) NIPPLE, HEX /2NPT (BRASS) VALVE, BALL /2 FPT CONN., SWIVEL FEM. 3/4HOSE X /2MPT SCREW, CAP /2-20 X
6 ILLUSTRATION 3: ARBOR & 6 BLADE GUARD GROUPING MODEL SS20-3H
7 PARTS LISTING - ILLUSTRATION 3 : ARBOR & 6 BLADE GUARD GROUPING 56208B ARBOR ASSY. W/ 3 GROOVE SHEAVE (INCLUDES ITEMS 2 THRU ) ARBOR SHAFT 23-3/8 L BEARING, BALL TPB KEY /4SQ X 2-/ BUSHING, SHEAVE SH X BORE SHEAVE 3.65 OD X 3GR.3V X SH 7 02 PIN, ROLL 5/6 X ARBOR BACKING PLATE ARBOR BLADE CAP 4 OD W/ HOLE WASHER, LOCK, INT. TOOTH NUT, HEX JAM -4 ZINC GRADE A SCREW, CAP 3/8-6 X 3/ WASHER, LOCK 3/8 ZINC WRENCH, ARBOR, -/2 OPEN END C BLADE GUARD ASSEMBLY 6 (INCLUDES ITEMS 6, 7, AND8) BLADE GUARD NOZZLE, COOLANT /8MPT W/ 6 TUBES BARB ELBOW 90, 3/8HOSE X /8MPT SCREW, CAP /2-20 X 4-/ WASHER, LOCK /2 ZINC SCREW, CAP 3/8-6 X WASHER, LOCK 3/8 ZINC WASHER, FLAT 3/8 SAE ZINC HOSE, WATER 3/8 ID X 46 L CLAMP, HOSE, SAE #6, ADJ. TO 3/ BARB, 3/8 HOSE X /4MPT (BRASS) BUSHING, HEX /2 X /4 NPT (BRASS) NIPPLE, HEX /2NPT (BRASS) VALVE, BALL /2 FPT CONN., SWIVEL FEM. 3/4HOSE X /2MPT SCREW, CAP /2-20 X
8 ILLUSTRATION 4: TRANSMISSION GROUPING
9 PARTS LISTING - ILLUSTRATION 4: TRANSMISSION GROUPING 5006 TRANSMISSION, HYDROSTATIC BELL CRANK, DRIVE LINKAGE SPROCKET #35 X.67 BORE SCREW, CAP 3/8-24 X 3-/ KEY, WOODRUFF /8 X /2 (#404) WASHER, FLAT 3/8 SAE ZINC SHEAVE, TRANS. 4 OD X GR. X.67 B NUT, HEX LOCK 3/8-24 ZINC FAN BLADE W/ PLATE 7, TRANS WASHER, LOCK 5/6 ZINC WASHER, LOCK /4 ZINC NUT, HEX 5/6-24 ZINC SCREW, CAP /4-20 X 3/ SCREW, CAP /2-3 X MOUNT, TRANSMISSION WASHER, FLAT /2 SAE ZINC BOLT, CARRIAGE 3/8-6 X 3 FULL THD SPRING, COMP..828 OD X 2 FL WASHER, GARRET 7/32 X X NUT, HEX LOCK /2-3 ZINC 2 08 WASHER, LOCK 3/8 ZINC LINKAGE, ROD 3/8 X 3 L NUT, HEX 3/8-6 ZINC NUT, HEX 3/8-24 ZINC TRANS. CONTROL ARM 54 A 099 ROD END, FEMALE 3/8-24 R.H. THREAD 4 08 WASHER, LOCK 3/8 ZINC 54 B 099L ROD END, FEMALE 3/8-24 L.H. THREAD NUT, HEX 3/8-6 ZINC NUT, HEX LOCK 3/8-24 ZINC JACKSHAFT 3/4 X SPACER, STEEL 9/6OD X 3/8ID X 7/ KEY 3/6SQ X SCREW, CAP 3/8-24 X -/4 PLATED BEARING, BALL 3/4 2-HOLE FLANGE SCREW, CAP 3/8-24 X -/4 PLATED FITTING, GREASE /4-28 X WASHER, LOCK 3/8 ZINC DRIVER, REAR WHEEL, -5/8 OD 25T WASHER, FLAT 3/8 SAE ZINC PIN, ROLL /4 X / SCREW, CAP 3/8-24 X -/ SCREW, CAP 3/8-24 X -/4 PLATED WASHER, FLAT 3/8 SAE ZINC WASHER, FLAT 3/8 SAE ZINC NUT, HEX LOCK 3/8-24 ZINC WASHER, LOCK 3/8 ZINC LEVER, CLUTCH NUT, HEX 3/8-24 ZINC KNOB, BALL -3/8 W/ /2-3THD, BLK CHAIN #35 X 24-/2 + OL + CL LEVER, DRIVE SPROCKET #35B54 X 3/4 BORE W/ KW PLATE, DRIVE LEVER PRESSURE SCREW, CAP /2-20 X SCREW, CAP /4-20 X -/ WASHER, FLAT /2 SAE ZINC WASHER, FLAT /4 SAE ZINC NUT, HEX LOCK /2-20 ZINC SPRING, COMP..468 OD X.25 FL BALL JOINT ASSY. 5/6-24 R.H. THRD NUT, HEX LOCK /4-20 ZINC LINKAGE, ROD 5/6 X 9 L MOUNT BRKT., DRIVE LEVER NUT, HEX 5/6-24 ZINC SCREW, CAP /2-20 X -/ L BALL JOINT ASSY. 5/6-24 L.H. THRD WASHER, BELLEVILLE /2ID X 3/64THK WASHER, LOCK 5/6 ZINC WASHER, FIBER 2-/4OD X /2ID X / NUT, HEX 5/6-24 ZINC WASHER, FLAT /2 SAE ZINC LINKAGE, ROD 5/6 X 3 L NUT, HEX 5/6-24 ZINC BALL JOINT ASSY. 5/6-24 R.H. THRD WASHER, LOCK 5/6 ZINC NUT, HEX 5/6-24 ZINC NUT, HEX LOCK /2-20 ZINC SCREW, CAP /4-20 X 3/ WASHER, FLAT /4 SAE ZINC NUT, HEX NYLON LOCK /4-20 2
10 ILLUSTRATION 5: ENGINE GROUPING FOR HONDA GX630 MODEL SS20-20H REVISED STARTING S/N 04005
11 PARTS LISTING - ILLUSTRATION 5: ENGINE GROUPING FOR HONDA GX ENGINE, HONDA GX630R-TXF MUFFLER, HONDA VHRM AIR CLEANER, HONDA DNLS5 (COMPLETE) ELEMENT, AIR FILTER, DNLS P ELBOW, SOLDER JOINT -/4 X SCREW, CAP STSHW 0-24 X / REGULATOR RECTIFIER (INCLUDED W/ ENGINE) WASHER, LOCK /4 ZINC SCREW, CAP /4-20 X ADAPTER, 20MM X.5 TO /4FPT ELBOW, STREET /4NPT X 45 (BRASS) 579 BARB, PUSH-ON /2HOSE X /4 MPT HOSE, PUSH-ON /2 ID X 7 L BARB, PUSH-ON /2HOSE X /2MPT PIPE PLUG /2 NPT (BRASS) BRACKET, OIL DRAIN SCREW, CAP /4-20 X 3/ WASHER, LOCK /4 ZINC WASHER, FLAT /4 SAE ZINC MOUNT, ENGINE, SS-6A/20/ BOLT, TAP /2-3 X 4 (FULL THREAD) NUT, HEX /2-3 ZINC TOGGLE PAD 7/8 D X 5/6 H X / BOLT, CARRIAGE 3/8-6 X -3/ WASHER, FLAT 3/8 SAE ZINC WASHER, LOCK 3/8 ZINC NUT, HEX 3/8-6 ZINC BOLT, CARRIAGE 3/8-6 X ZINC WASHER, FLAT 3/8 SAE ZINC WASHER, LOCK 3/8 ZINC NUT, HEX 3/8-6 ZINC SCREW, CAP /2-20 X WASHER, FLAT /2 SAE ZINC NUT, HEX LOCK /2-20 ZINC SWITCH ASSY., IGN., HONDA GX630 (INCL. W/ ENGINE) HOUR METER, INDUCTIVE CABLE, CHOKE CONTROL 72 (CUT TO 28 ) CABLE, TURN-TO-LOCK CONTROL 72 (CUT TO 37 ) R SWITCH COMPLETE, E-STOP W/ RED N.C. CONTACT BUTTON ONLY, PUSH-TURN TO RESET E-STOP CLIP ONLY, E-STOP 333E CONTACT BLOCK ONLY, N.C. E-STOP 33E0 RED
12 ILLUSTRATION 6: FUEL TANK GROUPING FOR HONDA GX630 REVISED STARTING S/N 2009
13 PARTS LISTING ILLUSTRATION 6: FUEL TANK GROUPING FOR HONDA GX TANK, FUEL 3 GAL., SS PIPE PLUG /8 NPT (BRASS) INCLUDED W/ ITEM - FUEL TANK CAP, FUEL TANK W/ VITON GASKET (INCLUDES TEATHER CHAIN) TUBE, FUEL PICK-UP BARB ELBOW 90, /4HOSE X /8MPT CLAMP, HOSE, SPRING-BAND 7/ TUBING, EVAP LOW PERM. FUEL /4 ID X 23 (BULK P/N 0948) 2 FT TUBING, EVAP LOW PERM. FUEL /4 ID X 6 (BULK P/N 0948) /2 FT TUBING, EVAP LOW PERM. FUEL 3/8 ID X 52-/2 (BULK P/N 5256) 4-/2 FT CANISTER, CARBON A FOR HONDA (INLUDES 2 MOUNTING PADS) 0834 SCREW, CAP /4-20 X /2 ZINC WASHER, LOCK, INT. TOOTH / TIE, CABLE, BLACK NYLON -/ SCREW, CAP 5/6-8 X 3/ WASHER, LOCK 5/6 ZINC WASHER, FLAT 5/6 SAE ZINC SCREW, CAP /4-20 X 3/ WASHER, FLAT /4 SAE ZINC NUT, KEPS LOCK /4-20 ZINC CLAMP, LOOM, 5/8 (SAE SIZE 0)
14 ILLUSTRATION 7: ENGINE GROUPING FOR KOHLER COMMAND CH730 PROPANE MODEL SS20-25P
15 PARTS LISTING - ILLUSTRATION 7: ENGINE GROUPING FOR KOHLER COMMAND CH730 PROPANE 5058 ENGINE, KOHLER 25HP COMMAND PROPANE MOUNT, ENGINE, SS-6A/20/ BOLT, CARRIAGE 3/8-6 X -3/ BOLT, CARRIAGE 3/8-6 X WASHER, FLAT 3/8 SAE ZINC WASHER, LOCK 3/8 ZINC NUT, HEX 3/8-6 ZINC BOLT, TAP /2-3 X 4 (FULL THREAD) NUT, HEX /2-3 ZINC TOGGLE PAD 7/8 D X 5/6 H X / BOLT, CARRIAGE 3/8-6 X ZINC WASHER, FLAT 3/8 SAE ZINC WASHER, LOCK 3/8 ZINC NUT, HEX 3/8-6 ZINC SCREW, CAP /2-20 X WASHER, FLAT /2 SAE ZINC NUT, HEX LOCK /2-20 ZINC BARB, PUSH-ON /2HOSE X 3/8MPT HOSE, PUSH-ON /2 ID X 9-/2 L BARB, PUSH-ON /2HOSE X /2MPT BRACKET, OIL DRAIN PIPE PLUG /2 NPT (BRASS) SCREW, CAP /4-20 X 3/ WASHER, LOCK /4 ZINC WASHER, FLAT /4 SAE ZINC G SWITCH COMPLETE, E-STOP... W/ GREEN N.O. CONTACT BUTTON ONLY, PUSH-TURN RESET CLIP ONLY, E-STOP 333E CONTACT BLOCK, N.O. 33E0 GREEN CABLE, TURN-TO-LOCK CONTROL 72 (CUT TO 32 ) CABLE, CHOKE CONTROL 72 (CUT TO 30 ) HOUR METER, INDUCTIVE SWITCH, KEY, KOHLER S ELBOW, STREET /4NPT X 45 (BRASS) ELBOW, 3/8FLARE X /4MPT X HOSE, HIGH PRESSURE 5/6 #6HPSS25UL COUPLING, REGO 74F FEMALE CLAMP, LOOM, 5/8 (SAE SIZE 0) SCREW, CAP /4-20 X 3/ WASHER, FLAT /4 SAE ZINC NUT, KEPS LOCK /4-20 ZINC PROPANE TANK 33LB. VERT. LIQ. WD PROPANE TANK MOUNTING BRKT TB MOUNT PLATE, PROPANE TANK SCREW, CAP 3/8-6 X WASHER, FLAT 3/8 SAE ZINC WASHER, LOCK 3/8 ZINC NUT, HEX 3/8-6 ZINC SCREW, CAP 5/6-8 X 3/ WASHER, LOCK 5/6 ZINC WASHER, FLAT 5/6 SAE ZINC BASE SUPPORT, PROPANE TANK SCREW, CAP 5/6-8 X WASHER, LOCK 5/6 ZINC WASHER, FLAT 5/6 SAE ZINC 2
16 ILLUSTRATION 8: BATTERY GROUPING MODELS SS20-20H & SS20-25P 840 BATTERY 2 VOLT/300 CCA(SMALL ENG.) CLAMP, BATTERY HOLD DOWN SCREW, CAP /4-20 X -/ WASHER, FLAT /4 SAE ZINC NUT, HEX NYLON LOCK /4-20 ZINC B CABLE, EYE-EYE 4GA. X 24 (BLACK) CABLE, EYE-EYE 4GA. X 40 (RED) INSULATOR, BAT.TERM. U- STYLE( RED) LOOM, FLEX 5/8 (BULK P/N 0926) 5 FT BOLT, CARRIAGE 5/6-8 X 3/ WASHER, LOCK 5/6 ZINC NUT, HEX 5/6-8 ZINC 2
17 ILLUSTRATION 9: OPERATING CONTROLS BLADE SAVER SWITCH (SS20-20H & SS20-25P ONLY) TOGGLE SPDT 3 TERM. (MODEL SS20-20H) TOGGLE SPST 2 TERM. (MODEL SS20-25P) WATER PUMP SWITCH - TOGGLE SPST 2 TERM. (OPTIONAL ON MODEL SS20-20H & SS20-25P) IGNITION SWITCH (SEE ILLUS. 5 OR 7) (MODELS SS20-20H & SS20-25P ONLY) HOUR METER, INDUCTIVE (OPTIONAL ON MODEL SS20-3H) DEPTH CONTROL (SEE ILLUS. ) DEPTH GAUGE (SEE ILLUS. 2) CABLE, CHOKE CONTROL (MODELS SS20-20H & SS20-25P ONLY) THROTTLE CONTROL CABLE SWITCH, EMERGANCY-STOP (SEE ENGINE GROUPINGS & WIRING DIAGRAMS) 0 59 GUIDE ROPE CLEAT (SEE ILLUS., ITEM 34) DRIVE CONTROL LEVER (SEE ILLUS. 6) CLUTCH CONTROL LEVER (SEE ILLUS. 7) WATER HOOK-UP & VALVE (SEE ILLUS. 2 OR 3) EXTENDABLE HANDLES (SEE ILLUS. ) HANDLE LOCK (SEE ILLUS., ITEM 4) 2
18 ILLUSTRATION 0: ENGINE GROUPING FOR HONDA GX390 MODEL SS20-3H
19 PARTS LISTING - ILLUSTRATION 0: ENGINE GROUPING FOR HONDA GX ENGINE, HONDA GX390UT2-QXC9 CYC.AC MUFFLER CAP, HONDA #833-ZE RIVET, BLIND /8 X.275L X.250HD BARB, PUSH-ON 3/8HOSE X M2-.5MALE HOSE, PUSH-ON /2 ID X 0 L BARB, PUSH-ON /2HOSE X /2MPT BRACKET, OIL DRAIN PIPE PLUG /2 NPT (BRASS) SCREW, CAP /4-20 X 3/ WASHER, LOCK /4 ZINC WASHER, FLAT /4 SAE ZINC MOUNT, ENGINE, SS-6A/20/ BOLT, TAP /2-3 X 4 (FULL THREAD) NUT, HEX /2-3 ZINC TOGGLE PAD 7/8 D X 5/6 H X / BOLT, CARRIAGE 3/8-6 X -3/ WASHER, FLAT 3/8 SAE ZINC WASHER, LOCK 3/8 ZINC NUT, HEX 3/8-6 ZINC BOLT, CARRIAGE 3/8-6 X ZINC WASHER, FLAT 3/8 SAE ZINC WASHER, LOCK 3/8 ZINC NUT, HEX 3/8-6 ZINC SCREW, CAP /2-20 X WASHER, FLAT /2 SAE ZINC NUT, HEX LOCK /2-20 ZINC G SWITCH COMPLETE, E-STOP W/ GREEN N.O. CONTACT BUTTON ONLY, PUSH-TURN TO RESET CLIP ONLY, E-STOP 333E CONTACT BLOCK ONLY, N.O. 33E0 GREEN CABLE, TURN-TO-LOCK CONTROL 72 (CUT TO 23 ) HOUR METER, INDUCTIVE (OPTIONAL) GUARD, CONSOLE REAR, SS-6A/ SCREW, CAP /4-20 X 3/ WASHER, LOCK /4 ZINC WASHER, FLAT /4 SAE ZINC 4
20 ILLUSTRATION : BELT DRIVE GROUPING ENGINE ENGINE RPM MODEL SS20 BELT DRIVE SPECIFICATION CHART BLADE DIAMETER BLADE SPEED (RPM) ENGINE SHEAVE ARBOR SHEAVE ARBOR BELTS TRANSMISSION BELT HONDA GX Groove Groove 3VX335 3-Required A50 HONDA GX630 KOHLER CH730 PROPANE Groove 4-Groove Groove 4-Groove VX335 4-Required 3VX355 4-Required A46 A46
21 PARTS LISTING - ILLUSTRATION : BELT DRIVE GROUPING BELT, ARBOR 3VX335 (HONDA GX390 & GX630) 3VX355 (KOHLER CH730) BUSHING, SHEAVE JA X -/8 BORE (HONDA GX630 ONLY) 3 SHEAVE OD X 4GR.3V X JA (HONDA GX630) 2.8 OD X 4GR.3V X -7/6 BORE (KOHLER CH730) KEY 3/8 SQ X 3 (HONDA GX630 & KOHLER CH730) SHEAVE 3.65 OD X 3GR.3V X SH (HONDA GX390) BUSHING, SHEAVE SH X BORE (HONDA GX390) INCLUDES KEY 7 74 BOLT, TAP /4-20 X 2 (FULL THD) WASHER, LOCK /4 ZINC BUSHING, SHEAVE TAPER-LOCK BORE (HONDA GX390) TAPER-LOCK -/8 B (HONDA GX630) TAPER-LOCK 60-7/6 B (KOHLER CH730) SHEAVE 4.5 OD X GR.AB X TAPER-LOCK BELT, TRANSMISSION A-50 (HONDA GX390) A-46 (HONDA GX630 & KOHLER CH730) IDLER PULLEY 2.75 X 3/4FLAT X 3/ SCREW, CAP 3/8-24 X 2-/ SPRING, EXT. OD X 3-5/ NUT, HEX LOCK 3/8-24 ZINC WASHER, FLAT SAE ZINC SPACER, STEEL 9/6OD X 3/8ID X 7/ NUT, HEX 3/8-24 ZINC SCREW, CAP /2-20 X -/ WASHER, FLAT /2 SAE ZINC IDLER ARM NUT, HEX LOCK /2-20 ZINC SHEAVE 3.65 OD X 4GR.3V X SH (HONDA GX630 & KOHLER CH730) SHEAVE 3.65 OD X 3GR.3V X SH (HONDA GX390) BUSHING, SHEAVE SH X BORE (INCLUDES SCREWS & WASHERS) 3 & 4 4
22 ILLUSTRATION 2: BLADE DEPTH GAUGE KIT PART # 5238 STANDARD ON MODELS SS20-20H & SS20-25P OPTIONAL ON MODEL SS20-3H
23 PARTS LISTING - ILLUSTRATION 2: BLADE DEPTH GAUGE KIT - PART # WHEEL, DEPTH GAUGE DEPTH GAUGE DECAL (PART OF DECAL KIT, PART # 9224) WASHER, FLAT 3/8 SAE ZINC SCREW, CAP 3/8-24 X 2-/ SHIM 3/8 X 5/8 X NUT, HEX LOCK 3/8-24 ZINC NUT, HEX NYLON LOCK 3/8-24 ZINC CABLE, DEPTH GAUGE 3/32 X 25 L SPRING, EXT. 6 L SCREW, CAP /4-20 X 0602 WASHER, FLAT /4 SAE ZINC NUT, KEPS LOCK /4-20 ZINC NUT, HEX NYLON LOCK /4-20 ZINC BOLT, SPADE 3/8-6 X -5/ NUT, HEX 3/8-6 ZINC WASHER, LOCK 3/8 ZINC
24 ILLUSTRATION 3: OPTIONAL WATER PUMP KIT PART # 5270 *MODELS SS20-20H & SS20-25P ONLY*
25 PARTS LISTING - ILLUSTRATION 3: OPTIONAL WATER PUMP KIT PART # PUMP, WATER, 2VDC, FLOJET QUAD SCREW, CAP /4-20 X -/ WASHER, FLAT /4 SAE ZINC WASHER, LOCK /4 ZINC NUT, ACORN / PUMP QUAD PORT BARB ELBOW / CLAMP, HOSE, SAE #6, ADJ. TO 3/ HOSE, WATER /2 ID X 4-7/8 L HOSE, WATER /2 ID X 4 L HOSE, WATER /2 ID X 2 L 5047 BARB ELBOW 90, /2HOSE X /2MPT STRAINER, NYLON T-STYLE /2FPT BARB, /2HOSE X /2MPT (PLASTIC) FUSE & HOLDER, 0 AMP SWITCH, TOGGLE SPST 5/0A-5/250V WIRE, RED 4AWG X 30 L CONNECTOR, BUTT 6-4GA. INSULATED TERM., RING #0 6-4GA. INSULATED TERM., RING 5/6 6-4GA. INSULATED * BARB, PUSH-ON /2HOSE X /4 MPT * BARB ELBOW 90, 3/8HOSE X /4MPT * CLAMP, LOOM, 5/8 (SAE SIZE 0) * SCREW, CAP /4-20 X 3/4 * WASHER, FLAT /4 SAE ZINC * NUT, KEPS LOCK /4-20 ZINC * DECAL, WATER PUMP ON-OFF (PART OF DECAL KIT # 9224) - ** PIPE TEE, FEMALE /4 NPT (BRASS) - ** BUSHING, HEX /4 X /8 NPT (BRASS) - ** SWITCH, PRESSURE, N/O (MODEL SS20-20H) SWITCH, PRESSURE, N/C (MODEL SS20-25P) *** HOSE, WATER 3/8 ID X 45 L - -9 THESE ITEMS ARE PRE-ASSEMBLED *20-26 THESE ITEMS ARE NOT PRE-ASSEMBLED **27-29 THESE ITEMS ARE REUSED FROM THE EXISTING UNIT. THEY ARE SHOWN FOR ASSEMBLY PURPOSES ONLY ***30 THIS ITEM IS REUSED FROM THE EXISTING UNIT. TRIM OFF TO THE APPROPRIATE LENGTH - -
26 WIRING DIAGRAM FOR MODEL SS20-20H
27 PARTS LISTING WIRING DIAGRAM FOR MODEL SS20-20H 538 HOUR METER, INDUCTIVE (INCLUDES 48 BLACK WIRE) BLADE SAVER SWITCH TOGGLE SPDT (3 SCREW TERMINALS) R SWITCH COMPLETE, E-STOP...W/ RED N.C. CONTACT 5257 BUTTON ONLY, PUSH-TURN TO RESET 548 CLIP ONLY, E-STOP 333E 567 CONTACT BLOCK ONLY, N.C. 33E0 RED SWITCH ASSY., IGN. HONDA P/N 3500-Z6L-003 (INCLUDED W/ ENGINE) SWITCH, PRESSURE, N/O WIRE 0 WHITE 4 GA. 2 #0 RING TERM. BOTH ENDS WIRE 20 YELLOW 4 GA. #0 RING TERM. ONE END WIRE 7 RED 4 GA. #0 RING TERM. & FORD BULLET CONN WIRE 58 BLACK 4 GA. FORD BULLET ONE END * WIRE 58 WHITE 4 GA. FORD BULLET CONN. & FORD LINE CONN. * 5446 WIRE 58 WHITE 4 GA BUTT CONN. & 5/6 RING TERM. * WIRE 58 BLUE 4 GA BUTT CONN. & /4 FEM. PUSH-ON TERM. * WIRE 58 YELLOW W/ BLACK STRIPE 4 GA. FORD BULLET CONN. & FORD LINE CONN BATTERY 2 VOLT/300 CCA(SMALL ENG.) CABLE, EYE-EYE 4GA. X 40 (RED) 6 507B CABLE, EYE-EYE 4GA. X 24 (BLACK) SWITCH, TOGGLE SPST 5/0A-5/250V (2 SCREW TERMINALS) FUSE & HOLDER, 0 AMP PUMP, WATER, 2VDC, FLOJET QUAD (OPTIONAL) * THESE WIRES ARE PART OF A WIRE HARNESS ASSEMBLY - PART # 5449
28 WIRING DIAGRAM FOR MODEL SS20-25P REVISED STARTING S/N HOUR METER, INDUCTIVE G SWITCH COMPLETE, E-STOP W/ GREEN N.O. CONTACT BUTTON ONLY, PUSH-TURN TO RESET CLIP ONLY, E-STOP 333E CONTACT BLOCK ONLY, N.O. 33E0 GREEN SWITCH, TOGGLE SPST 5/0A-5/250V (2 SCREW TERMINALS) SWITCH, PRESSURE, N/C (NORMALY CLOSED) SWITCH, KEY, KOHLER S CONNECTOR, WIRE HARNESS, MALE TERMINAL, FEM., KOHLER S CONNECTOR, WIRE HARNESS, FEMALE TERMINAL, MALE, KOHLER S CONNECTOR, BULLET FORD 3-WAY STD SWITCH, TOGGLE SPST 5/0A-5/250V (2 SCREW TERMINALS) FUSE & HOLDER, 0 AMP PUMP, WATER, 2VDC, FLOJET QUAD (OPTIONAL) 4 4
29 WIRING DIAGRAM FOR MODEL SS20-3H REVISED STARTING S/N G SWITCH COMPLETE, E-STOP W/ GREEN N.O. CONTACT BUTTON ONLY, PUSH-TURN TO RESET CLIP ONLY, E-STOP 333E CONTACT BLOCK ONLY, N.O. 33E0 GREEN CONN., WIRE QUICK-SPLICE 8-4 GA HOUR METER, INDUCTIVE (OPTIONAL)
30 DECAL SHEET P/N 9223 CAUTION DISCONNECT ELECTRICAL POWER SUPPLY OR SPARK PLUG SS-20 & 24-4 x 7 P/N 9223 RevA To prevent injury when servicing or changing blades or accessories exceeds 85dBA CALIFORNIA PROPOSITION 65 WARNING The engine exhaust from this product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. CHECK OIL DAILY SS-24
31 DECAL SHEET P/N 9224 SS-20 & x 7 P/N 9224 RevB GREASE BEARINGS DAILY DANGER BEFORE CUTTING INTO ANY SURFACE, INSURE THERE ARE NO BURIED GAS, ELECTRICAL, HIGH PRESSURE AIR, SEWER OR WATER LINES NOTE: Locate this decal so it is visible from operator's position YOU MUST READ OPERATOR S INSTRUCTION MANUAL BEFORE OPERATING PUSH TO STOP PUSH-TURN TO RESET R
An ibuy Stores Company
REVISED STARTING SERIAL NO. 060604 PARTS MANUAL Model SK-4 4 DOWNCUT CONCRETE/ASPHALT WALK BEHIND SAWS SKU NO. MODEL POWER OPTION 45400D SK4-9H HONDA ENGINE 9 HP GX0 45600D SK4-H HONDA ENGINE HP GX40 4800D
PARTS LIST MANUAL Model SS20
E-SS20-PL-093 PARTS LIST MANUAL Model SS20 REVISED STARTING SERIAL # 3090047 Model SS20-20H Model SS20-3H 20 & 6 SELF-PROPELLED CONCRETE & ASPHALT SAWS SKU # MODEL # SIZE POWER OPTION 32600 SS20-20H 20
SELF-PROPELLED CONCRETE & ASPHALT SAW
STARTING SERIAL # 0920024 PARTS LIST MANUAL Model SS24 SELF-PROPELLED CONCRETE & ASPHALT SAW SKU NO. MODEL NO. POWER OPTION 3800 SS24-24H HONDA GASOLINE ENGINE MODEL GX670 JWA 2009 Page READ AND UNDERSTAND
EdcoParts.com An ibuy Stores Company
E-4ECGC-PL-008 REVISED STARTING SERIAL #080000 PARTS LIST MANUAL Models 4-EC & 4-GC FOUR-DISC CONCRETE FLOOR GRINDERS SKU # 5500 54400 53600 52800-230 52800-460 52800-50/220 52800-50/380 52800-50/440 MODEL
PARTS LIST MANUAL MODEL SS26-35K. Gasoline Powered 35 H.P. Kohler Command Pro Self-Propelled Concrete & Asphalt Saw SAW SET-UP OPTIONS
REVISED STARTING SERIAL # 600307 PARTS LIST MANUAL MODEL SS26-35K Gasoline Powered 35 H.P. Kohler Command Pro Self-Propelled Concrete & Asphalt Saw SAW SET-UP OPTIONS SKU NUMBER BLADE GUARD SIZE BLADE
Revised 9/05. Model X-750 Subassembly Parts List
Revised /0 Model Subassembly Parts List Blade Belt Tensioner 0 PART NUMBER DESCRIPTION QTY. -G0-0-0 SHSB, / x / -G0-0-0 SHSB, / x / -X-0-00 Arm, Belt Tensioner -G0-0-00 Washer, Flat /" -0-0-0 Washer, Split
8 WALK BEHIND SCARIFIER
PARTS LIST MANUAL 8 WALK BEHIND SCARIFIER REVISED STARTING SERIAL # 060110202 MODEL CPM8-9H SHOWN CPM8 SCARIFIERS SKU NO. MODEL POWER OPTIONS 79300 CPM8-9H 9 HP HONDA GX270 GASOLINE ENGINE 79500 CPM8-5B/230/1
GASOLINE POWERED TRAFFIC LINE REMOVER PARTS LIST MANUAL
REVISED STARTING SERIAL # 2000 GASOLINE POWERED TRAFFIC LINE REMOVER PARTS LIST MANUAL MODEL TLR7-11H PART #77500 Page 1 READ AND UNDERSTAND THE OPERATORS INSTRUCTION MANUAL THOROUGHLY BEFORE ATTEMPTING
MK-1605 Electric Concrete Saw EXPLODED VIEW & PARTS LIST
www.mkdiamond.com MK-0 Electric Concrete Saw EXPLODED VIEW & PARTS LIST MK-0B Premium Part# 8099 Revision 0 0.08 Manual Part# 79 Caution: Read all safety and operating instructions before using this equipment.
PARTS LIST MANUAL MODEL GMS20
REVISED STARTING SERIAL # 121010018 PARTS LIST MANUAL MODEL GMS20 20 GASOLINE POWERED MASONRY SAWS SKU # MODEL # POWER OPTION 22500 GMS20-9H HONDA GASOLINE ENGINE MODEL GX270 21100 GMS20-11H HONDA GASOLINE
E-CDR48-PL-0413 REVISED STARTING SERIAL # PARTS LIST MANUAL 48 CORE DRILL RIGS. EdcoParts.com
E-CDR48-PL-0413 PARTS LIST MANUAL 48 CORE DRILL RIGS REVISED STARTING SERIAL # 130410266 EdcoParts.com SKU # MODEL # VACUUM PUMP DRILL MOTOR SPEED/RPM 97100EV 4820 INCLUDED MILWAUKEE DYMO DRILL 2 SPEED
Proline 17HP Mid Size Traction Unit
Form No. 3323 754 Proline 17HP Mid Size Traction Unit Model No. 30169 200000001 and Up Parts Catalog Ordering Replacement Parts To order replacement parts, please supply: the part number, the quantity,
99105A Series - F Brush Lift Assembly Model :99105A 20" EZ BD Floorkeeper (w/ 2-12 V Batteries) - Series F
9905A Series - F Brush Lift Assembly Model :9905A 0" EZ BD Floorkeeper (w/ - V Batteries) - Series F Page- 5 7 8 9 5 7 8 0 5 7 8 9 0 5 7 8 9 0 0589 NUT, LOCK W/ LOCTITE 070 RING, RETAINING 0 WASHER, PLAIN
STAND ALONE DRYER BASE. Parts Manual
STAND ALONE DRYER BASE Parts Manual TABLE OF CONTENTS DRYER BASE SYSTEM DRYER BASE SYSTEM ASSEMBLY (FIG. 1) 3 FRAME ASSEMBLY (FIG. 2). 5 CONVEYOR DRIVE ASSEMBLY (FIG. 3)...7 IDLER SHAFT / TENSIONER ASSEMBLY
Exploded View - Model J-7020M/J-7040M Miter Cut-off Saw Base
22 Exploded View - Model J-7020M/J-7040M Miter Cut-off Saw Base Parts List - Model J-7020M/J-7040M Miter Cut-off Saw Base 1 J-5507591 Base, Machine 1 1-1 5512197 Plug, Drain (3/8in, PT) 2 5507592 Screw,
MK-2000 GAS SERIES MASONRY SAW
www.mkdiamond.com MK-000 GAS SERIES MASONRY SAW Parts List MODELS part # MK-00H MK-00V MK-00K MK-00G Revision 0 0.0 Manual Part No. 0-PM Caution: Read all safety and operating instructions before using
PARTS LIST MANUAL MODEL 2-EC and 2-GC
E-ECGC-PL-010 REVISED STARTING SERIAL # 33 PARTS LIST MANUAL MODEL -EC and -GC Two-Disc Concrete Floor Grinder Page 1 E-ECGC-PL-010 READ AND UNDERSTAND THE OPERATORS INSTRUCTION MANUAL THOROUGHLY BEFORE
IMAGE V. Parts and Service Manual
IMAGE 0V Section II Parts and Service Manual (88B) CLARKE TECHNOLOGY Image Operator's Manual Page AUTHORIZED PERSONNEL MAINTENANCE To Access Pump Motor. Remove brush housing from machine. See "Brush Motor
A HEATER KIT With Diesel Engine Connection Fittings
A-12142 HEATER KIT With Diesel Engine Connection Fittings Figure 1 (General Layout and Parts I.D.) Page 1 of 6 Read these instructions and identify all components. Please retain these instructions for
MK-100 JCS Tile Saw TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS SERIAL NUMBER:
MK-00 JCS Tile Saw TILE SAW OWNER S MANUAL & OPERATING INSTRUCTIONS CAUTION: Read all safety and operating instructions before using this equipment Enter the Serial Number of your new saw in the space
PARTS LIST MANUAL MODEL BB14G SHOWN WITH OPTIONAL PROCART
REVISED STARTING SERIAL # 09080097 PARTS LIST MANUAL MODEL BB4G SHOWN WITH OPTIONAL PROCART 4 GASOLINE POWERED PORTABLE MASONRY SAWS SKU # MODEL # POWER OPTION 26300 BB4G-5.5H HONDA GX60 W/ CYCLONE AIR
Electronic Service Manuals
Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions
Electric Automatic Carpet Extractor. Operator and Parts Manual. Model No.: Rev. 00 (11-99)
1520 Electric Automatic Carpet Extractor Model No.: 607649 Operator and Parts Manual TENNANT COMPANY Commercial Products 12875 RANSOM STREET HOLLAND MI 49424 U.S.A. FAX: 1 800 678 4240 CUSTOMER SERVICE:
AD-115ES Parts Manual
AD-115ES Parts Manual 24 VAC Phase 7 / S.A.F.E. System July 2002 American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com
MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02A
MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02A C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
MK-SINGLE DISC GRINDER OWNERS MANUAL PARTS LIST & OPERATING INSTRUCTIONS
www.mkdiamond.com MK-SINGLE DISC GRINDER OWNERS MANUAL PARTS LIST & OPERATING INSTRUCTIONS SDG-3 Revision 202 11.2011 SDG-11 Manual 158273 Caution: Read all safety and operating instructions before using
ML-758 Parts Manual. Phase 7 / Non-Coin / Dual Timer with F.S.S. Options
ML-758 Parts Manual Phase 7 / Non-Coin / Dual Timer with F.S.S. Options American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com
ALTAIR II CONVECTION STEAM COOKER PARTS AND SERVICE MANUAL
ALTAIR II CONVECTION STEAM COOKER PARTS AND SERVICE MANUAL EFFECTIVE MAY, 0 Superseding All Previous Parts Lists. The Company reserves the right to make substitution in the event that items specified are
HEAVY-DUTY FLOOR GRINDER / POLISHER
PARTS LIST MANUAL REVISED STARTING SERIAL # 150410237 HEAVY-DUTY FLOOR GRINDER / POLISHER PROPANE MODELS MODEL 2DHDP-18P SKU # 58200 MODEL 2DP-18P SKU # 53900P JWA 2015 Page 1 READ AND UNDERSTAND THE OPERATORS
ML-75 Parts Manual. Dual Timer / Phase 7 Non-Coin with F.S.S. Options Through June 2002
ML-75 Parts Manual Dual Timer / Phase 7 Non-Coin with F.S.S. Options Through June 2002 American Dryer Corporation 88 Currant Road Fall River MA 02720-4781 USA Telephone: +1 (508) 678-9000 / Fax: +1 (508)
REEL LAWN MOWER. MASPORT 500 Series. Mower Model Engine Shaft Dia Introduction Serial Number
REEL LAWN MOWER MASPORT 500 Series Mower Model Engine Shaft Dia Introduction Serial Number 019030 500 - PRR Honda GX160 20 Dec 2007 7091921 019035 500 - PRR B&S 3.5 I/C 19 Sep 2008 7154532 019040 500 -
PACER 30 VACUUM IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE OPERATING OR SERVICING MACHINE
DANGER! PACER 30 VACUUM IMPORTANT SAFETY INSTRUCTIONS READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE OPERATING OR SERVICING MACHINE Failure to Observe These Instructions Can Cause Fire, Electrical Burn, Shock
MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02B
MODELS CMA-180 VL/180 VLTall PARTS MANUAL Rev 2.02B C M A D I S H M A C H I N E S 1 2 7 0 0 K N O T T A V E N U E GARDEN GROVE, CALIFORNIA 92841 800-8 5 4-6 4 1 7 FAX 714-895-2141 www.cmadishmachines.com
REPLACEMENT PARTS MANUAL FOR MODEL: PWS 45-75, AED-2 & APK-4 SERIES
PREC SION Water Systems REPLACEMENT PARTS MANUAL FOR MODEL: PWS 45-75, AED-2 & APK-4 SERIES 0004 0002 0001 PRECISION WATER SYSTEMS WATER DISTILLER MANUFACTURED BY: PRECISION DESIGN & MANUFACTURING INC.
Repair Parts List DRYER MODEL NUMBER MDG30MNAWW. When requesting service or ordering parts, always provide the following information:
Repair Parts List DRYER MODEL NUMBER MDG30MNAWW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005
CLARKE Fire Protection Products
CLARKE Fire Protection Products PARTS ILLUSTRATIONS DOOSAN SERIES (0-00 RPM): MODEL ENGINES FOR FIRE PUMP APPLICATIONS DQH-UFAA, DQH-UFAAG DQH-UFAA0, DQH-UFAA0 DQH-UFAA, DQH-UFAA PRODUCTION DATE: JUNE,
Spare Parts List (Kits) Model Ref.:- HM35 SERIES A Spare Parts List (Kits) Issue 8 Dated 10-February-2015 Reference Drawing 09-1108-0000 Issue B Dated 07-January 2014 Drawing Ref. Part Number DESCRIPTION
Power Eagle 1016/1020. Self Contained Carpet Extractor. Operator and Parts Manual
Power Eagle 0/00 Self Contained Carpet Extractor Model No.: 080 0 09 0 (Can.) 08 00 09 00 (Can.) 0980 00 (0V/0HZ) Operator and Parts Manual NOBLES 8 RANSOM STREET HOLLAND MI 9 U.S.A. CUSTOMER SERVICE:
ML-96 Parts Manual. Phase 7
ML-96 Parts Manual Phase 7 2001 American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com www.amdry.com ADC Part
PITNEY BOWES. Parts Manual. Copyright, Pitney Bowes Inc All rights reserved. FIT-Dryerpartsvrev0 1
FLEXIBLE INKJET TRANSPORT 30 FIT DRYER BASE (SLV) Parts Manual Copyright, Pitney Bowes Inc. 2010 All rights reserved FIT-Dryerpartsvrev0 1 VERSION HISTORY The table below summarizes the history of this
UNIVERSAL 750 PRE-MIX DISPENSER
Anoka, MN. 0 - Telephone -00--00 Facsimile -00--0 MODEL NO. xxx xxx Universal 0 of Control Code A Manual Part No. 00 -- Revised: -- ªIMI Cornelius Co., - Anoka, MN. 0 - Telephone -00--00 Facsimile -00--0
MODEL X-150D SUB-ASSEMBLY PARTS LIST REV. 02/27/04
MODEL X-D SUB-ASSEMBLY PARTS LIST REV. 0//0 MAINFRAME ASSEMBLY X-D DECO ITEM PART NUMBER DESCRIPTION QTY 0 --0-00 Mainframe, X ---00 Rollcage, X -0-00-0 HHB, /-0 x / -G0-0- HHB, /- x / -0-00-0 HHB, /-0
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY Parts List - Trailer Assembly 01 190331 Frame Assembly w/plugs 02 180741 Bracket, Axle, Trailer 03 180751 Axle, Trailer 04 180641 Washer,.8" ID, 1.5"
PARTS MANUAL PN and MICROFICHE PN /03. MSX 140 Model #W045303CA MSX 140 INT L Model #W045303IA Rev. 01. E 2003 Polaris Sales Inc.
PARTS MANUAL PN 0 and MICROFICHE PN 0 /0 MSX 0 Model #W00CA MSX 0 INT L Model #W00IA Rev. 0 TABLE OF CONTENTS Parts Manual AIR VENT A... BATTERY BOX... COMPARTMENT DOOR... COOLING SYSTEM... CRANKCASE...
Hakki Pilke Raven spare parts manual
1 ENGLISH Hakki Pilke Raven spare parts manual Valimotie 1, FI-85800 Haapajärvi, FINLAND Tel. +358 8 772 7300, Fax +358 8 772 732 info@maaselankone.fi, www.maaselankone.fi 2 Table of contents 1 Upper section
Power Eagle 716. Self Contained Carpet Extractor. Operator and Parts Manual. Model No.: SI Rev. 01 (01-00)
Power Eagle 76 Self Contained Carpet Extractor Model No.: 608543 609234 SI Operator and Parts Manual NOBLES 2875 RANSOM STREET HOLLAND MI 49424 U.S.A. CUSTOMER SERVICE: -800-365-6625 FAX: 800 678 4240
Parts and Service Manual
Section II Parts and Service Manual (70241A) CLARKE TECHNOLOGY Operator's Manual - MINI MAX Page -29- Frame and Front Cover Assembly Drawing 2/01 Page -30- CLARKE TECHNOLOGY Operator's Manual -MINI MAX
Repair Parts List DRYER MODEL NUMBER MDG30PN3AW. When requesting service or ordering parts, always provide the following information:
Repair Parts List DRYER MODEL NUMBER MDG30PN3AW When requesting service or ordering parts, always provide the following information: - Product Type - Part Number - Model Number - Part Description 2005
REPLACEMENT PARTS MANUAL
PREC SION Water Systems REPLACEMENT PARTS MANUAL FOR MODEL: PWS 8-8(120VAC), PWS 8-8(240VAC), AED-1(120VAC), AED-1(240VAC), APK-1(120VAC) & APK-1(240VAC) PART # 500003 500014 500006 500015 500007 500016
SIMPLICITY MODEL LVPB7200
SIMPLICITY MODEL 7200 LVPB7200 BODY GROUP 7200 BODY GROUP 7200 Key Part No Description Key Part No Description 1 7.8-PLAIN Simplicity 7000 Paper Bag 29 D625-0231 Suction Inlet Complete 2 B221-0213 Dust
CATALOG OF REPLACEMENT PARTS HSROG SERIES SINGLE RACK OVEN. A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO
CATALOG OF REPLACEMENT PARTS HSROG SERIES SINGLE RACK OVEN HSROG ML-111148 A product of HOBART CORPORATION 701 S. RIDGE AVENUE TROY, OHIO 45374-0001 FORM 43003 (June 2001) HOT SECTION 26 OVEN TOP SECTION
EXPORT REEL LAWN MOWER MASPORT 500. Part Number Model Serial Number Engine R/MWR 500 PRR B&S 3.5 IC
EXPORT REEL LAWN MOWER MASPORT 500 Part Number Model Serial Number Engine 019091 R/MWR 500 PRR 7412516 B&S 3.5 IC Month and Year of First Manufacture - Nov 2011 Starting Serial Number - 7412516 Issue A.0
ML-78 Phase 7 Parts Manual
ML-78 Phase 7 Parts Manual With FSS Options American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com www.amdry.com
AD-81 Parts Manual. Phase 7 OPL with S.A.F.E. Option
AD-81 Parts Manual Phase 7 OPL with S.A.F.E. Option American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com www.amdry.com
Frontier. Self Contained Carpet Extractor. Operator and Parts Manual. Model No.: Rev. 00 (09-99)
Frontier Self Contained Carpet Extractor Model No.: 0 0 Operator and Parts Manual NOBLES 7 RANSOM STREET HOLLAND MI U.S.A. CUSTOMER SERVICE: -00-- FAX: 00 7 0 OUTSIDE U.S. : --7-0 00 Rev. 00 (0-) 0 RECOVERY
REPLACEMENT PARTS MANUAL
PREC SION Water Systems REPLACEMENT PARTS MANUAL FOR MODEL: PWS 8-5(120VAC), PWS 8-5(240VAC), AED-1(120VAC), AED-1(240VAC), APK-2(120VAC) & APK-2(240VAC) PART # 500002 500013 500006 500015 500008 500017
Hustler Z Bac Vac Parts Manual ,
Hustler Z Bac Vac Parts Manual 967, 988 Hustler Turf Equipment P.O. Box 7000 Hesston, Kansas 6706-097 t- 56 06/08 Table of Contents Chapter General Information.................................... - Chapter
EFFECTIVE: MAY, American Dish Service ADS MODEL: ASQ GLASSWASHER PARTS MANUAL. 900 Blake Street Edwardsville, Kansas (913) /08
EFFECTIVE: MAY, 2008 American Dish Service ADS MODEL: ASQ GLASSWASHER PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 05/08 021-0061 Model: ASQ Glasswasher American Dish Service
FS Automatic Scrubber Fregadora Automática. Model No.: Pac. Operator and Parts Manual Manual de Operación y de Piezas
FS-2000 Automatic Scrubber Fregadora Automática Model No.: 609541 609542 Pac Operator and Parts Manual Manual de Operación y de Piezas CASTEX 12875 RANSOM STREET HOLLAND MI 49424 U.S.A. FAX: 1 800 678
ML-82 Parts Manual. Phase 7 Microprocessor with F.S.S. Options
ML-82 Parts Manual Phase 7 Microprocessor with F.S.S. Options American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com
REPLACEMENT PARTS MANUAL
PREC SION Water Systems REPLACEMENT PARTS MANUAL FOR MODEL: PWS 12-20(120VAC), PWS 12-20(240VAC), AED-1(120VAC), AED-1(240VAC), APK-1(120VAC) & APK-1(240VAC) PART # 510001 510003 500006 500015 500007 500016
INSTALLATION INSTRUCTIONS John Deere One Series; 1023E, 1025R and 1026R Models A HEATER KIT. Figure 1 (General Layout and Parts I.D.
A-11978 HEATER KIT Figure 1 (General Layout and Parts I.D.) Read these instructions and identify all components. Please retain these instructions for future reference and parts ordering information. Refer
MLG35 Parts Manual Phase 8
MLG35 Parts Manual Phase 8 For Internal Use Only RETAIN THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE Whirlpool Corporation Commercial Laundry Benton Harbor, MI 49022 1-800-662-3587 Part No.
AD-360X2 Parts Manual
AD-360X2 Parts Manual Phase 7 American Dryer Corporation 88 Currant Road Fall River MA 02720-4781 USA Telephone: +1 (508) 678-9000 / Fax: +1 (508) 678-9447 e-mail: techsupport@amdry.com www.adclaundry.com
PARTS MANUAL. American Dish Service ADS CONVEYOR DISHWASHER MODELS: ADC-44 L-R/R-L EFFECTIVE: SEPTEMBER 1, 2001
EFFECTIVE: SEPTEMBER 1, 2001 ADS CONVEYOR DISHWASHER MODELS: ADC-44 L-R/R-L PARTS MANUAL 900 Blake Street Edwardsville, Kansas 66111 (913)422-3700 211-0044L-R / 212-0044R-L ADC-44 Conveyor Dishwasher 2
WASHER/DRYER CONTROL PANEL PARTS For Models: LTE6234DQ5, LTE6234DT5 (Designer White) (Biscuit)
WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts Installation Instructions 8577199 English 3397634 Arabic Use & Care Guide 8578179 English 3405528 Arabic 8542752 Sheet, Cycle
MK-1080 PAVER SAW OWNER S MANUAL & PARTS MANUAL
www.mkdiamond.com OWNER S MANUAL & PARTS MANUAL Revision 106 03.2019 Manual Part No. 166894 Caution: Read all safety and operating instructions before using this equipment. This manual MUST accompany the
WASHER/DRYER CONTROL PANEL PARTS
WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts W10356098 Installation Instructions W10343071 Guide, Use & Care W10364010 Wiring Diagram W10343084 Energy Guide 2 3390688
WASHER/DRYER CONTROL PANEL PARTS For Model: WET3300SQ0 (Designer White)
WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts Installation Instructions W10118289 English 8578179 English W10118304 Sheet, Cycle Feature W10113806 Wire Diagram W10118487
WASHER/DRYER CONTROL PANEL PARTS For Models: LTE6234DQ2, LTE6234DZ2, LTE6234DT2 (Designer White) (Designer Almond) (Biscuit)
WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts Installation Instructions LIT3397616 English LIT3397634 Arabic Use & Care Guide LIT3401097 English LIT3405528 Arabic LIT8299786
ConstructionParts.com
NXC-100 PLATE COMPACTOR ASSEMBLY ITEM # NXC-100 PLATE COMPACTOR ASSEMBLY PART DESCRIPTION QTY 888-634-4289 EFFECTIVE NOTE NO. DATE 1 60611 BASE PLATE, COMPACTOR 1 04/01/2008 2 60612 BRIDGE PLATE, COMP.
WASHER/DRYER CONTROL PANEL PARTS
WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 3398879 Harness, Console Wiring (Automatic) (Includes Illus. 1A, 1B & 1C) 1A 3350130 Plug, Terminal (2 Way) (Connects With Main Dryer Harness)
FS Automatic Scrubber Fregadora Automática. Operator and Parts Manual Manual de Operación y de Piezas. Model No.: Pac
FS-2000 Automatic Scrubber Fregadora Automática Model No.: 6097 60974 - Pac Operator and Parts Manual Manual de Operación y de Piezas CASTEX 12875 RANSOM STREET HOLLAND MI 49424 U.S.A. CUSTOMER SERVICE:
Slow drying Thermostat What is temperature set at on control. Check for adequate makeup air (1.5 sq. Ft.)
Tumbler turns ignition sparks no flame Gas supplymake sure gas supplyis working Gas pressure Make manometer check of gas pressure for 3.5" W.C. or more at supply side Spark electrode Gas valve Check electrode
Group 35 Drainage System. This group contains information on the holding tanks. equipment applied to the coach. ...Sink and Shower Strainers
Group 5 Drainage System GENERAL: This group contains information on the holding tanks and drainage system. It also covers any waste destruction equipment applied to the coach. SPECIFICS: As applicable...drain
WASHER/DRYER CONTROL PANEL PARTS For Model: YWET3300SQ0 (Designer White)
WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts Installation Instructions W10118289 English 8578179 English W10118304 Sheet, Cycle Feature W10113806 Wire Diagram 2 3390688
Dirt Dragon. Operator and Parts Manual WOOD FLOOR CLEANING MACHINE
Dirt Dragon WOOD FLOOR CLEANING MACHINE Operator and Parts Manual 1001 Brown Avenue Toledo, Ohio 43607-0127 Customer Service: 800-441-1934 Fax: 800-942-2007 Technical Service: 877-856-5954 www.basicoatings.com
ES-5050 / ES5050TE Parts Manual
ES-5050 / ES5050TE Parts Manual Phase 8 American Dryer Corporation 88 Currant Road Fall River MA 02720-4781 USA Telephone: +1 (508) 678-9000 / Fax: +1 (508) 678-9447 e-mail: techsupport@amdry.com www.adclaundry.com
WASHER/DRYER CONTROL PANEL PARTS For Model: YWET3300SQ1 (Designer White)
WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts Installation Instructions W10118289 English 8578179 English W10118304 Sheet, Cycle Feature W10117522 Wire Diagram 2 3390688
ML-75 Parts Manual. Dual Timer/Phase 7 OPL with FSS Options. Through June 2002
ML-75 Parts Manual Dual Timer/Phase 7 OPL with FSS Options Through June 2002 American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail:
Drain Cleaning Machine K-39
Drain Cleaning Machine K- 0 A- AUTOFEED Cable Chuck Pan Head Screw #0 - () Chuck Adapter Nose Piece Spiral Ring () Hand Grip Sleeve Clamp Springs () See Service Notes 0 Spacer Clips () Gasket Drum Front
American Dryer Corporation
ML-190 Parts Manual 2001 American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com www.amdry.com ADC Part No. 450409-6
ML-190 Phase 7 Parts Manual
ML-190 Phase 7 Parts Manual American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com www.amdry.com 050202DMG/mcronan
model # Order # Xpert-HD 3.8/35 P / DD PD DA
Service MANUAL model # Order # Xpert-HD 3.8/35 P / DD-383537 1.107-108.0 PD4-35324 1.107-096.0 DA-383539 1.107-102.0 8.780-001.0 CONTENTS Exploded View... 4 Exploded View Parts List... 5 S.2 Pump and
NOTE: Parts are no longer available for this tool. The manual will continue on the next page.
NOTE: Parts are no longer available for this tool. The manual will continue on the next page. ------------------------------------------------- CATALOG NO. 7628 Form No. Z21 0 Date 1-93 High Pressure Power
HEAT/ COOL/ DEFROST FORD THUNDERBIRD
specializing in AIR CONDITIONING, PARTS AND SYSTEMS for your classic vehicle PERFECT FIT IN-DASH HEAT/ COOL/ DEFROST 1964-66 FORD THUNDERBIRD CONTROL & OPERATING INSTRUCTIONS The controls on your new Perfect
WASHER/DRYER CONTROL PANEL PARTS For Model: MET3800TW2 (White)
WASHER/DRYER CONTROL PANEL PARTS WASHER/DRYER LAUNDRY SYSTEM 1 Literature Parts W10222378 Installation Instructions W10196552 Use & Care Guide W10117755 Sheet, Cycle Feature W10114285 Wire Diagram 2 3390688
Electronic Service Manuals
Electronic Service Manuals This electronic document is provided as a service to our customers. We do not create the contents of the information contained in this document. Should you have detailed questions
AD-30V/AD-50V Parts Manual Phase 7/Dual Timer
AD-30V/AD-50V Parts Manual Phase 7/Dual Timer (for models mfd. as of July 1, 2002) American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 e-mail:
ML-758 Parts Manual. Dual Timer/Phase 7 OPL with FSS Options
ML-758 Parts Manual Dual Timer/Phase 7 OPL with FSS Options American Dryer Corporation 88 Currant Road Fall River, MA 02720-4781 Telephone: (508) 678-9000 / Fax: (508) 678-9447 E-mail: techsupport@amdry.com
M5 BLUE BOY FIVE GALLON PAINT MIXER Owner s Manual
M5 BLUE BOY FIVE GALLON PAINT MIXER Owner s Manual Introduction..3 Safety Precautions 4 Installation Instructions 5 Electrical Connections..7 Operating Instructions..8 Maintenance Procedures...8 Parts
LA7800XPW0 TABLERO (S/P) (S/P) DESCONTINUADO (S/P) (S/P) (S/P) (S/P) (S/P) (S/P) DESCONTINUADO (S/P) (S/P) DESCONTINUADO DESCONTINUADO (S/P) (S/P)
LA7800XPW0 TABLERO LA7800XPW0 TABLERO 1 8066156 PANEL, REAR (S/P) 2 355326 SCREW, 13-16 X 5/8 (S/P) 3 64211 SCREW DESCONTINUADO 4 285653 CAP, END (L.H.) (S/P) 5 93770 BUMPER, RUBBER 6 285653 CAP, END.
5540/5560. Automatic Floor Scrubber. Operator and Parts Manual Manual de Operación y de Piezas ENGLISH - ESPAÑOL Rev.
ENGLISH - ESPAÑOL 550/550 Automatic Floor Scrubber Operator and Parts Manual Manual de Operación y de Piezas TENNANT COMPANY Commercial Products 2875 RANSOM STREET HOLLAND MI 92 U.S.A. FAX: 800 78 20 CUSTOMER
EXPLODED VIEWS & PARTS LISTS
542 DOOR VIEW Ref. Part No. Description Ref. Part No. Description 1 6200720 Screw, #8-18 x 1/2 PH Truss HD 2 420040 Standard Handle End Cap Replacement Components 4200700 Extended Handle End Cap Replacement
CATALOG OF REPLACEMENT PARTS
CATALOG OF REPLACEMENT PARTS CE SERIES ELECTRIC COMBI OVENS ML-138010 ML-138011 ML-138012 ML-138013 ML-138016 ML-138017 ML-138014 ML-138015 ML-138018 ML-138019 CE6HD (Left) CE6HD (Right) CE10HD (Left)
CMA Dishmachines Knott Avenue Garden Grove, CA Undercounter High Temperature Dishwasher. Service Replacement Parts.
CMA Dishmachines 1700 Knott Avenue Garden Grove, CA 981 Toll Free: 1- (800) 8-617 Fax: 1- (71) 89-11 Service Replacement Parts Undercounter High Temperature Dishwasher Model: UC6e M Machine Serial No.
MODEL CMA-180UC PARTS MANUAL Rev 1.16
MODEL CMA-180UC PARTS MANUAL Rev 1.16 CMA DISHMACHINES 12700 KNOTT STREET GARDEN GROVE, CALIFORNIA 92841 800-854-6417 FAX 714-895-2141 wwwcmadishmachines.com TABLE OF CONTENTS MODEL CMA-180UC 1. PARTS
AD-330 / AD-320 Parts Manual Phase 7 Coin with S.A.F.E. System Option
AD-330 / AD-320 Parts Manual Phase 7 Coin with S.A.F.E. System Option American Dryer Corporation 88 Currant Road Fall River MA 02720-4781 USA Telephone: +1 (508) 678-9000 / Fax: +1 (508) 678-9447 e-mail:
MDG78 Parts Manual. Phase 8. For Internal Use Only RETAIN THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE
MDG78 Parts Manual Phase 8 For Internal Use Only RETAIN THESE INSTRUCTIONS IN A SAFE PLACE FOR FUTURE REFERENCE Maytag Benton Harbor, MI 1-800-662-3587 Part No. 450662-1 Retain This Manual In A Safe Place
GP-6 Cabmaker Owner s Manual and Operating Instructions
GP- Cabmaker Owner s Manual and Operating Instructions Belts Model: Part# 80008 Diamond Pads Model: Part# 80005 Carbide Wheel Model: Part# 8000 Revision 05 0.08 Manual Part No. 597 Caution: Read all safety