ATTACHMENT B COMPENSATION AND PRICING
|
|
|
- Louisa French
- 6 years ago
- Views:
Transcription
1 COMPENSATION This is a firm fixed price Contract between County and Contractor(s) to provide plumbing supplies and accessories, on an as needed basis, as set forth in Attachment A Scope of Work. The Contractor(s) agrees to accept the specified compensation as set forth in this Contract as full remuneration for performing all services and furnishing all staffing, labor and materials required, insurance requirements, connected with the services, and for performance by the Contractor of all duties and obligations hereunder. Contractor shall only be compensated as set forth herein below for work performed in accordance with the Scope of Work. County shall have no obligation to pay any sum in excess of total Contract amount specified herein authorized by amendment in accordance with Articles 3 Amendments and 17 Changes of County Contract Terms and Conditions. PRICING Pricing set forth in Attachment B shall be firm for the first term of the Contract. All price decreases will automatically be extended to the County of Orange. County will accept decreases only. Pricing will be firm unless a reduction is available. PAYMENT AND INVOICING REQUIREMENTS Invoices are to be submitted in arrears, unless otherwise directed in this Contract, upon the satisfactory completion and acceptance of commodity/services in accordance with Paragraph 6. Acceptance/Payment. Contractor shall reference Contract number on invoice. Payment will be net 30 days after receipt of an invoice in a format acceptable to County and verified and approved by County and subject to routine processing requirements. The responsibility for providing invoice rests with Contractor. Billing shall cover services and/or goods not previously invoiced. Contractor shall reimburse County for any monies paid to Contractor for goods or services not provided or when goods or services do not meet Contract requirements. Payments made by County shall not preclude the right of County from thereafter disputing any items or services involved or billed under this Contract and shall not be construed as acceptance of any part of the goods or services. CONTRACTOR SHALL MAIL INVOICES TO: COUNTY OF ORANGE, OCCR / OC PARKS ATTN: ACCOUNTS PAYABLE 1300 S GRAND AVE., BUILDING B SANTA ANA, CA EACH INVOICE SHALL HAVE A UNIQUE NUMBER AND INCLUDE THE FOLLOWING INFORMATION: 1. Work site address 2. County Contract number 3. Date(s) of order 4. Product description, quantity, prices 5. Sales tax, if applicable 6. Contractor s name and address 7. Contractor s remittance address (if different from above) 8. Contractor s Federal Taxpayer Identification Number Page 1 of 18
2 * is off catalog price list GALVANIZED DOMESTIC SCHEDULE GALVANIZED IMPORT SCHEDULE BLACK IMPORT SCHEDULE BLACK DOMESTIC SCHEDULE STANDARD WEIGHT Steel Pipe SEAMLESS OR ERW BLACK PLAIN END Brass Pipe CAMBRIDGE-LEE TYLER PIPE Cast Iron - Soil Pipe CHARLOTTE PIPE ABS/DWV & PVC/DWV Pipe ABS/DWV PVC/DWV PCV PIPE GENERIC SCHEDULE CPCV PLASTIC PIPE GLADDING, MCBEAN & COMPANY Plastic Pressure Pipe Clay Pipe MISSION CLAY PRODUCTS Soil & No Hub Fittings AMERICAN BRASS & ALUMINUM FOUNDRY CLAMP ALL DURIRON FERNCO GRINNELL IDEAL IPS CORP MISSION SCHOTT SCIENTIFIC GLASS INC SCAFAB METAL TYLER PIPE CHARLOTTE PIPE & FOUNDRY Page 2 of 18
3 * is off catalog price list Brass/Bronze Fittings AMERICAN BRASS & ALUMINUM FOUNDRY CHAMPION SPRINKLER EQUIPMENT MERIT WILKINS TEMSTAT Clay Pipe Fittings GLADDING, MCBEAN & COMPANY MISSION CLAY PRODUCTS MISSION RUBBER PRODUCTS CI & MI Fittings GRINNELL STOCKHAM ABS/DWV & PVC/DWV Fittings CHARLOTTE PIPE & FOUNDRY MUELLER PLASTICS NIBCO, INC FERNCO, INC Plastic Sewer & Drain Fittings NATIONAL DIVERSIFIED SALES CPVC/PVC Fittings MULTI FITTING LIMITED SPEARS MANUFACTURING NIBCO, INC GEORGE FISCHER SLOANE CAPITOL MANF. STOCKHAM BONNEY Steel Fittings HACKNEY INC Dielectric Fittings (Domestic Only) CAPITOL DRESSER EPCO SALES INC WATTS REGULATORS Page 3 of 18
4 * is off catalog price list LOCHINVAR WATER HEATER CORP. NORTH TOWN CO. HOLLAENDER MB SKINNER CLAMPETTE SMITH BLAIR TAG-SEAL TELSCO Galvanized Steel Nipples (Domestic Only) CAPITOL MANF. MERRIT GRAY, E. A. Brass/Bronze Nipples (Domestic Only) CAPITOL MANF. GRAY, E. A. MERRIT MILLS SEAMLESS SWAGER MUELLER INDUSTRIES Black Steel Nipples (Domestic Only) CAPITOL MANF. MERRIT GRAY, E. A. ACORN ENGINEERING/NEPTUNE JOSAM FRANK PATTERN & MFG. PLASTIC ODDITIES JR SMITH WADE ZURN LPS PRODUCT GROUP Drains & Grates, Valve Boxes PLUMBING PRODUCTS Cleanout, Plugs, Covers & Access, Strutt Channel Boxes & Doors AMERICAN BRASS & ALUMINUM FOUNDRY MILCOR COMPANY Page 4 of 18
5 * is off catalog price list MISSION RUBBER PRODUCTS PASCO SPECIALTY MANUFACTURING Supply Connectors & Specialties BRASS CRAFT MFG. EASTMAN/QUEST/VALLEY FLUIDMASTER INC Flexible Connectors/Fittings & Specialties FERNCO INC Hoses, Hose Adapters & Hose Clamps DEARBORN PRODUCTS PASCO SPECIALTY & MFG. KIRKHILL INC Pipe Hangers, Metal, Framing, Fire Equipment, Fire Hose Cabinet, Fire Hydrants, Valves AUK VALVES B-LINE SYSTEMS CARPENTER & PATTERSON CLOW ERICO MASON INDUSTRIES GRINNELL HOLDRITE HYDROGUARD JONES KENNEDY M & H VALVES MICHIGAN HANGER POTTER ROEMENT SUPER STRUTT TYLER Wrapped Pipe, Pipe Insulation Materials, Cable Assembly & Steam Trap HALSTEAD INSULATION MATERIALS CORP RUBATEX THORPE Page 5 of 18
6 * is off catalog price list IPS CORP CALPICO INC NASHUA ARMACELL ARMSTRONG WORLD INDUSTRIES B & G BARNES & JONES CALPICO INC DOW HOFFMAN SPECIALTY INDUSTRIAL INSULATION GROUP JOHNS MANVILLE LYNN PRODUCTS MEPCO NEWTEX INDUSTRIES OWENS CORNING PARKER BOILER CO. LA PASCO PLUMBEREX ROXUL INC WATTS WATER TECH UNIFAX TUNSTALL THERMACELL CAMBRIDGE LEE COPPER TUBING EASTMAN ELKHART PROD CORP FLAGG HOLLAENDER ROBERT MANUFACTURING S & G TUBING CERRO GENERIC Copper Tubing (Domestic Only) Page 6 of 18
7 * is off catalog price list ANDERSON BARROWS METAL CORP Aluminum Tubing (Domestic Only) ROBERTS MANUFACTURING CO CAMBRIDGE LEE EASTMAN ELKHART PROD CORP FLAGG HOLLAENDER ROBERT MANUFACTURING S & G TUBING CERRO GENERIC Brass/Chrome Plated Tubing (Domestic Only) CALIFORNIA TUBULAR PRODUCTS ROBERTS MANUFACTURING CO CAMBRIDGE LEE EASTMAN ELKHART PROD CORP FLAGG HOLLAENDER ROBERT MANUFACTURING S & G TUBING GENERIC CERRO Capillary Tubing (Domestic Only) QUEST (DIV. OF US BRASS) CALIFORNIA TUBULAR PRODUCTS ROBERTS MANUFACTURING CO CAMBRIDGE LEE EASTMAN ELKHART PROD CORP FLAGG HOLLAENDER Page 7 of 18
8 * is off catalog price list ROBERT MANUFACTURING S & G TUBING GENERIC CERRO Polyethlin/Polybutyln/Rubber/Vinyl Tubing (Domestic Only) ANDERSON BARROWS METAL CORP KIRKHILL INC QUEST (DIV. OF US BRASS) ROBERT MANUFACTURING S & G TUBING GENERIC CERRO HOLLAENDER FLAGG ELKHART PROD CORP EASTMAN CAMBRIDGE LEE CPVC Hot Water Tubing (Domestic Only) SLOANE, R & G PRODUCTS NIBCO INC ELKHART PRODUCTS CORP MERIT ANDERSON BARROWS FLO-CONTROL INC Tube Fittings GENERIC GENERIC CHAMPION Copper DWV Sweat Cast Lawn & Turf Sprinkler Equipment WOODFORD MFG CALIFORNIA BRASS MFG. CO CENTRAL BRASS MFG ACORN ENGINEERING CO Page 8 of 18
9 * is off catalog price list ARROWHEAD BRASS EATON CORP AMERICAN VALVE MFG CORP Industrial Combination Valves CONBRACO INDUSTRIES (APOLLO) CASH, AW VALVE MFG CO HAMMOND VALVE CORP MILWAUKEE VALVE CO NIBCO INC RED-WHITE VALVE CORP WATTS REGULATORS Water Valves General AMERICAN VALVE MFG CORP HERSEY MEASUREMENT CO BRASS CRAFT MFG CALIFORNIA BRASS MFG. CO CASH, AW VALVE MFG CO CHICAGO FAUCET CO EATON CORP E & S VSALVES EASTMAN/QUEST/VALLEY ELJER CO FEBCO SALES HAMMOND VALVE CORP MCDONALD, AY PUMPS NIBCO INC POTTER-ROEMER QUEST (DIV. OF US BRASS) ROBERT MFG. CO WATTS WILKINS BRASS CRAFT MFG CONBRACO INDUSTRIES (APOLLO) Gas Valves Page 9 of 18
10 * is off catalog price list CALIFORNIA BRASS MFG. CO MCDONALD, AY PUMPS ASCO GENERAL CONTROLS HAMMOND VALVE CORP HONEYWELL INC ROBERTSHAW CONTROLS WHITE RODGERS Heating Hydronic Valves AMERICAN/BARNES & JONES/CONBRACO BELL & GOSSETT (ITT) CASH, AW VALVE MFG CO CENTRAL BRASS/EATON/GOULD JD/PRKR-HAN HAMMOND VALVE CORP MAID-O-MIST PROD./TACO PROD. SPIRAX SARCO WATTS REGULATORS CANTERBURY ENTERPRISE/PRICE PFISTER Flush Valves DELANEY SLOAN VALVE CO ZURN INDUSTRIES ANDERSON BARROWS METAL CORP CENTRAL BRASS MFG. CO CHICAGO FAUCET CO SIMMONS MFG. CO WATTS REGULATORS Specialty Valves ARROWHEAD BRASS PRODUCTS Valve Accessories/Tools WATTS REGULATORS AMERICAN STANDARD - CRANE ELJER CO BRADLEY ELKAY/FIAT/FLORESTONE PROD. Sinks/Sink Rims Page 10 of 18
11 * is off catalog price list JUST MFG. CO KOHLER PLUMBING PROD. CO MOEN/MUSTEE & SONS/MANSFIELD POLARWARE/SWAN/UNI-RUNDLE VANCE INDUSTRIES Bathtubs/Showers/Whirlpools AMERICAN STANDARD BRIGGS PLUMBING/LASCO BATHWARE CRANE PLUMBING (DIV. OF FIAT) ELJER CO FIAT SHOWERS & FIXTURES FLORESTONE PRODUCTS CO STERLING/MUSTEE & SONS/MANSFIELD KOHLER PLUMBING SWAN CORP UNIVERSAL RUNDLE CORP Closets/Components/Bowls AMERICAN STANDARD BRIGGS PLUMBING CRANE PLUMBING (DIV. OF FIAT) GERBER PLUMBING FIXTURES ELJER CO KOHLER PLUMBING MANSFIELD SANITARY UNIVERSAL RUNDLE CORP WESTERN POTTERY BERNIS MFG. CO BENEKE CORP BRIGGS PLUMBING CENTACO MFG. CORP KOHLER PLUMBING OLSONITE CORP SPERZEL INDUSTRIES UNIVERSAL RUNDLE CORP BEMIS Closets Seats Page 11 of 18
12 * is off catalog price list AMERICAN STANDARD BRIGGS PLUMBING CRANE PLUMBING (DIV. OF FIAT) GERBER PLUMBING FIXTURES ELJER CO KOHLER PLUMBING MANSFIELD SANITARY Urinals/Bidets UNIVERSAL RUNDLE CORP Lavatories/Vanities AMERICAN STANDARD BRIGGS PLUMBING GERBER PLUMBING FIXTURES ELJER CO KOHLER PLUMBING MANSFIELD SANITARY SWAN CORP UNIVERSAL RUNDLE/WESTERN POTTERY Appliances/Disposals IN-SINK-ERATOR WASTE KING CORP WHIRLAWAY DISPOSERS Fountains & Coolers CRANE PLUMBING FIXTURES OASIS GROUP ELJER CO ELKAY/HALSEY TAYLOR-TEMPRITE HAWS KOHLER AMERICAN STANDARD OASIS GROUP ELKAY/HALSEY TAYLOR-TEMPRITE HAWS IN-SINK-ERATOR WASTE KING CORP Accessories & Parts Page 12 of 18
13 * is off catalog price list AMERICAN STANDARD BRIGGS PLUMBING CHICAGO FAUCET CO DELTA FAUCET CO ELJER CO GERBER PLUMBING FIXTURES KOHLER PLUMBING MOEN Bath/Tub/Shower PRICE PFISTER/SPEAKMAN/STERLING UNIVERSAL RUNDLE/VALLEY PASCO SPECIALTY Parts/Trim & Accessories Lav/Sink/Urnal/Appiance/Drinking Fountain/ Water Heater AMERICAN STANDARD BRIGGS PLUMBING CHICAGO FAUCET CO DELTA FAUCET CO ELJER CO GERBER PLUMBING FIXTURES KOHLER PLUMBING MOEN PRICE PFISTER/SPEAKMAN/STERLING UNIVERSAL RUNDLE/VALLEY PASCO SPECIALTY POLARWARE CO ELKAY/HALSEY TAYLOR-TEMPRITE IN-SINK-ERATOR HAWS MURDOCK VALLEY JUST MFG. CO TAPCO SYMMONS INDUSTRIAL MELARD MFG Page 13 of 18
14 * is off catalog price list OASIS CORP NUTONE EBCO MFG. CO BRASS CRAFT MFG. CO STATE INDUSTRIES T & S BRASS & BRONZE Tubular Brass/Plastic Elbows/Bends/Offsets/Drains/ Plugs/Tees/Traps/Tubing/Wastes/Specialties CALIFORNIA TUBULAR CONNECTICUT STAMPING & BENDING SANITARY-DASH MFG. PASCO AMERICAN BRASS & ALUMINUM FOUNDRY ELJER COMPANY KOHLER PLUMBING Heating Specialties - Water Heaters/Boilers/Sheet Metal/Air Handling & Misc. AMERICAN TUBE & CONTROLS (AMTROL) AMERICAN METALS PRODUCTS AMERICAN WATER HEATERS AMTROL ACME MANUFACTURING ARTIS METALS COMPANY ARMSTRONG INTERNATIONAL BELL & GOSSETT BRADFORD WHITE CORP BURNHAM CORP DEARBORN PRODUCTS DURALAST ELMDOR/STONEMAN HART & COOLEY MFG. CO HOFFMAN INTERTHERM LSP PRODUCTS GROUP MAID-O-MIST Page 14 of 18
15 * is off catalog price list MCDONNELL & MILLER MODINE MFG. CO NAYLON CO OATEY CO PEERLESS BOILERS REZNOR PRODUCTS (ITT) RHEEM RUDD SELKIRK METALBESTOS SLANT-FIN SLOANE, R & G PRODUCTS SMITH, AO CORP SMITTY PAN MFG. CO SPACEMAKER CO SPIRAX SPARCO STATE INDUSTRIES TACO PRODUCTS UTICA RADIATOR CORP WEIL-MCLAIN WHITE-RODGERS WILLIAMS FURNACE CO Cements-Specialties Cements/Caulking/Solders/Flux/Water Treatment/Chem/Oils/Lubs/Cleaners/ Bowl Wax/Specialties AMETEK (PLYMOUTH PROD. DIV) ATLAS MINERALS & CHEMICALS BLACK SWAN MFG. CO CALPICO CUNO DIV. (AQUA-PURE FILTERS) DEBEST MFG. CO HALSTEAD INDUSTRIAL PROD. HARRIS, JW PRODUCTS HENRY, WW PRODUCTS HERCULES CHEMICAL CO Page 15 of 18
16 * is off catalog price list IPS CORP KESTER CO (DIV. OF LITTON) NASHUA NUPAK PRODUCTS (OAKUM) PLUMBING PRODUCTS CO RADIATOR SPECIALTY CO RECTORSEAL COMPOUNDS RHODES/AMERICAN STEEL WOOL CO ROBBINS PRECAST SEAFAB PRODUCTS S.O.S. PRODUCTS UNIVERSAL RUNDLE CORP Controls Hydronic/Heating/Lawn & Turf /Specialty/Meters/Gauges/Thermo/Accessories ASCO CONTROLS CHAMPION SPRINKLERS ERERSON CONTROLS HONEYWELL INC JOHNSON CONTROLS MARSH INSTRUMENTS CO MCDONNELL & MILLER PASCO SPECIALTY & MFG. CO ROBERTSHAW CONTROLS WEISS, ALBERT A THERMOMETERS WHITE-RODGERS Hangers & Fasteners Hangers/Fasteners/Clamps/Bolts/Nuts/Washers/ Accessories AMERICAN METAL PRODUCTS B-LINE SYSTEMS BPC INDUSTRIES GB, INC HOLDRITE (HUBBARD ENTERPRISES) LSP PRODUCTS GROUP (SPECIALTY PROD) MICHIGAN HANGER COMPANY NAYLON PRODUCTS Page 16 of 18
17 * is off catalog price list SUPER STRUT Repair Specialties Gaskets/Bowl Wax/Kits/ Accessories BLACK SWAN BPC INDUSTRIES CAMCO INDUSTRIES COAST FOUNDRY & MFG DEBEST MFG EASTMAN FLUIDMASTER HERCULES CHEMICAL CO KIRKHILL LSP PRODUCT GROUP MELARD MFG CO MOEN NOBLE CO (CLORALOY) PASCO SPECIALTIES PLUMBING PRODUCTS CO POLYFOAM PACKERS CORP RADIATOR SPECIALTIES CO SMITTY PAN MFG WILLIAM HARVEY CO Tools Assorted Tools DEARBORN (CHICAGO SPECIALTY) RIGID TOOL COMPANY QUEST (DIV. OF US BRASS) MISCELLANEOUS ITEMS DISCOUNT STRUCTURE: CONTRACTOR SHALL PROVIDE TO COUNTY VERIFICATION OF DISCOUNTS PRIOR TO PAYMENT OF ANY INVOICE. CONTRACTOR SHALL SUBMIT A COPY OF PAGES DIRECTLY FROM CURRENT MANUFACTURER S PUBLISHED PRICE LIST FOR EACH ITEM ORDERED FOR COUNTY VERIFICATION. CONTRACT PRICING FOR ITEMS SHALL BE BASED ON THE CURRENT RELEASE OF CONTRACTOR S PUBLISHED PRICING CATALOG OR OTHER SOURCE, LESS CONTRACTOR S DISCOUNT LISTED BELOW. CONTRACTOR WILL PROVIDE THE FOLLOWING DISCOUNT PERCENTAGE FOR ITEMS LISTED IN THE CATALOG OR OTHER SOURCE. IF CATALOGS ARE NOT PROVIDED PLEASE SPECIFY OTHER SOURCE: MANUFACTURE S LIST PRICING SHEET Page 17 of 18
18 * is off catalog price list DISCOUNT OFF LIST PRICES: Page 18 of 18
PRICE BOOK CONTENTS 010 PIPE
010 PIPE 010 Buttweld Pipe 020 ERW 2-24 Pipe 030 Domestic Seamless Pipe 2-12 040 Domestic OD Seamless 14-24 Pipe 050 Pressure Pipe A106 060 Fusion Bond Pipe 080 Cut To Order Pipe 020 STAINLESS STEEL PIPE
SCHOOL BOARD OF BREVARD COUNTY OFFICE OF PURCHASING SERVICES 2700 JUDGE FRAN JAMIESON WAY VIERA, FL Estimated
SCHOOL BOARD OF BREVARD COUNTY OFFICE OF PURCHASING SERVICES 2700 JUDGE FRAN JAMIESON WAY VIERA, FL 32940-6601 BID #08-042/JJ PLUMBING SUPPLIES MAINTENANCE WAREHOUSE VENDORS RECOMMENDED FOR AWARD: Name
SECTION LABORATORY and DE-IONIZED WATER SYSTEMS STANDARD CONSTRUCTION STANDARD
PART 1: GENERAL 1.01 Codes and Standards: A. Plumbing Code Compliance: Comply with applicable portions of National Standard Plumbing Code pertaining to selection and installation of Plumbing materials
WATERSTONE ASSISTED LIVING AND MEMORY CARE
DOMESTIC WATER PIPING SPECIALTIES BATON ROUGE, LOUISIANA SECTION 22 11 19 SECTION 22 11 19 - DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions
University of Rochester October 17, 2008 Brooks Landing Business Center
SECTION 224200 COMMERCIAL PLUMBING FIXTURES PART 1 - GENERAL 1.1 WORK INCLUDED A. Provide all labor, materials, equipment and services to perform operations required for the complete installation and related
CONTRACT PERIOD: OCTOBER 1, 2014 THROUGH SEPTEMBER
Procurement Department SOUTHEAST FLORIDA CO-OP NO.: 15-006R DESCRIPTION: PLUMBING SUPPLIES, PARTS, FIXTURES, PIPE, TUBING AND RELATED MATERIALS CONTRACT PERIOD: OCTOBER 1, 2014 THROUGH SEPTEMBER 30, 2016
PLUMBING DESIGN GUIDELINES SECTION DESIGN GUIDELINES DUVAL COUNTY PUBLIC SCHOOLS
The Design Guidelines, which follow, are intended to supplement the Educational Specifications and State Requirements for Educational Facilities (SREF). Note: All fittings shall be installed by no less
A. This Section includes the following domestic water piping specialties:
SECTION 221119 DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01
DESIGN AND CONSTRUCTION STANDARDS GENERAL DESIGN GUIDELINES
2.05 PLUMBING GENERAL DESIGN AND CONSTRUCTION STANDARDS GENERAL DESIGN GUIDELINES - 2.05 It is expected that the plumbing design professional will conform to accepted good engineering design practices.
Union County Vocational - Technical Schools Scotch Plains, New Jersey
SECTION 22 40 00 - PLUMBING FIXTURES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following: 1. Faucets for lavatories, bathtubs, bathtub/showers, showers and sinks. 2. Flushometers. 3. Toilet
4. Provide brass valve tags marked for the service. See pertinent service specification for valve type.
Section includes various guidelines for valves, instrumentation for process systems, meters, thermometers, and gauges. This design guideline is written to the designer of record (DOR). This guideline is
NATURAL GAS PIPING
SECTION 15496 - NATURAL GAS PIPING PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
DESIGN STANDARDS SECTION PLUMBING FIXTURES AND EQUIPMENT. 1.3 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.
PART 1 - GENERAL 1.1 Toilet rooms and utility rooms to have floor drains at lowest point. 1.2 Utilize Exposed Flushometers. 1.3 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.
DOMESTIC WATER PACKAGED BOOSTER PUMPS
DIVISION 22 PLUMBING 22 11 16 DOMESTIC WATER PIPING 22 11 19 DOMESTIC WATER PIPING SPECIALTIES 1. To facilitate landscape and other maintenance operations, exterior hose bibs shall be provided at 150 foot
SECTION DOMESTIC WATER PIPING SPECIALTIES
SECTION 22 11 19 DOMESTIC WATER PIPING SPECIALTIES PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
WET-PIPE SPRINKLER SYSTEMS
SECTION 211313 - WET-PIPE SPRINKLER SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipes, fittings, and specialties. 2. Fire-protection valves. 3. Fire-department connections. 4. Sprinklers.
DESIGN STANDARDS SECTION Toilet rooms and utility rooms to have floor drains at lowest point.
PART 1 - GENERAL 1.01 Toilet rooms and utility rooms to have floor drains at lowest point. 1.02 Utilize Exposed Flushometers. 1.03 Wall hung toilet room fixtures. Urinals for handicapped may be stall type.
COHASSET, MA March 6, The following is the HVAC outline specifications, which defines the scope of work of the HVAC system.
23 00 00 HEATING, VENTILATING & AIR-CONDITIONING The following is the HVAC outline specifications, which defines the scope of work of the HVAC system. PART 1 GENERAL 1.1 CODES A. All work installed under
MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING. A. This Section includes the following sanitary drainage piping specialties:
SECTION 221319 - SANITARY WASTE PIPING SPECIALTIES PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following sanitary drainage piping specialties: 1. Backwater valves. 2. Cleanouts. 3. Floor
2). Crane Co. 4). Kohler Co. 5). Universal-Rundle Corp. Revised September 29, 2017 Commercial Plumbing Fixtures
PART 1: GENERAL A. This Section provides design standards for plumbing fixtures and trim. Certification of compliance with specified ANSI, UL, and ASHRAE Standards will be required, as appropriate, for
Facility Fire-Suppression Water-Service Piping
University of New Hampshire University of New Hampshire Scholars' Repository Division 21 Fire Supression Chapter 5 Technical Construction and Renovation Standards 4-23-2015 211100 - Facility Fire-Suppression
A. Section Joint Sealants: Seal fixtures to walls and floors.
SECTION 224000 - PLUMBING FIXTURES PART 1 GENERAL 1.1 SECTION INCLUDES A. Water closets. B. Urinals. C. Lavatories. D. Sinks. E. Service sinks. F. Showers. G. Wash fountains. H. Eye wash fountains. 1.2
B. Standard-Pressure Standpipe Piping: Fire-suppression standpipe piping designed to operate at working pressure 175 psig (1200 kpa) maximum.
Page 211200-1 SECTION 211200 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
SECTION DOMESTIC WATER PIPING SYSTEMS. 0. Pipe and pipe fittings are specified in the following sections:
SECTION 15411 January 7, 2004 DOMESTIC WATER PIPING SYSTEMS. RELATED SECTIONS 0. Pipe and pipe fittings are specified in the following sections:. Section 15061, STEEL PIPE AND FITTINGS.. Section 15062,
LAV FCO WCO NOTES: CONTRACTOR SHALL REFER TO ARCHITECTURAL DRAWINGS FOR MOUNT HEIGHTS AND SPECIAL MOUNTING INSTRUCTION AND LIMITATIONS.
ELECTRIC WATER HEATER SCHEDULE DESIGNATION MODEL MANUFACTURER STORAGE RECOVERY TEMPERATURE LEAVING ELECTRICAL CHARACTERISTICS REMARKS/SPECIAL INSTRUCTIONS NUMBER GALLONS RATE RISE WATER K.W. VOLTAGE PHASE
Kitchen & Bath Faucets
147001 2J-1H 147002 2J-1C For American Brass 147003 2J-5H 147004 2J-5C For American Brass *The manufacturer has changed the stem design on this model. Either stem can be replaced with the current model.
A. Piping specialties Work required by this Section is indicated on drawings and schedules and by requirements of this Section.
SECTION 22 05 19 ~PIPING SPECIALTIES PART 1 ~GENERAL 1.1 RELATED DOCUMENTS: A. Drawings and general provisions of Contract, including General and Supplementary Conditions and Division 1 Specification Sections,
Manufacturers Note: Line card is sorted alphabetically - not by priority or preference WATER HEATERS FAUCETS & TRIM BOILERS & HYDRONICS PUMPS SOLAR WATER PUMPING AO Smith Res/Com American Standard Amtrol
HWC NOTES: CONTRACTOR SHALL REFER TO ARCHITECTURAL DRAWINGS FOR MOUNT HEIGHTS AND SPECIAL MOUNTING INSTRUCTION AND LIMITATIONS.
ELECTRIC WATER HEATER SCHEDULE DESIGNATION MODEL MANUFACTURER STORAGE RECOVERY TEMPERATURE LEAVING ELECTRICAL CHARACTERISTICS REMARKS/SPECIAL INSTRUCTIONS NUMBER GALLONS RATE RISE WATER K.W. VOLTAGE PHASE
DESIGN GUIDELINES AND TECHNICAL STANDARDS
DESIGN GUIDELINES AND TECHNICAL STANDARDS Date of Issuance: January 1, 2014 DIVISION 22 PLUMBING SECTION 22 1118 DOMESTIC WATER DISTRIBUTION SYSTEM 1. General: This section outlines general requirements
MLA Architects Pierz Public Schools ISD #484 Healy High School Multi-Purpose & Choir Additions Pioneer Elementary School Class Room Addition Pierz, MN
DIVISION 21 - FIRE SUPPRESSION (REFER TO SECTION 23 05 00 FOR BASIC FIRE SUPPRESSION REQUIREMENTS) 21 05 00 Common Work Results for Fire Suppression 21 13 13 Wet-Pipe Sprinkler Systems END OF SECTION FIRE
A. This Section includes the following fire-suppression piping inside the building:
SECTION 211000 - WATER-BASED FIRE-SUPPRESSION SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following fire-suppression piping inside the building: 1. Automatic wet-type, standpipe systems.
MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 21 FIRE SUPPRESSION
SECTION 211200 - FIRE-SUPPRESSION STANDPIPES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipes, fittings, and specialties. 2. Fire-protection valves. 3. Hose connections. 4. Fire-department connections.
1. Division 22 Section "Emergency Plumbing Fixtures." 2. Division 22 Section "Drinking Fountains and Water Coolers."
Page 224000-1 SECTION 224000 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
SOCORRO INDEPENDENT SCHOOL DISTRICT Summary Sheet Plumbing Materials. CSP No E1309 Awarded: September 18, 2012 Expires: September 18, 2013
Company Name SISD Vendor Number Company Contact Address, City, State, Zip Phone: Fax: Email: Web Page Deviations Warranty Period Return Policy Delivery FREIGHT: The district requests that all deliveries
DESIGN STANDARDS SECTION Toilet rooms and utility rooms to have floor drains at lowest point.
PART 1 - GENERAL 1.01 Toilet rooms and utility rooms to have floor drains at lowest point. 1.02 Utilize Exposed Flushometers. 1.03 Utilize wall hung toilet room fixtures. Urinals for handicapped may be
SECTION PLUMBING FIXTURES AND TRIM. A. Types of plumbing fixtures required for the project include the following:
SECTION 15440 PART I - GENERAL 1.01 WORK INCLUDED A. Types of plumbing fixtures required for the project include the following: 1. Water Closets 2. Urinals 3. Lavatories 4. Mop Sink 5. Sinks 6. Electric
North Hanover Township School District North Hanover Township, New Jersey
SECTION 211313 - WET-PIPE SPRINKLER SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipes, fittings, and specialties. 2. Fire-protection valves. 3. Fire-department connections. 4. Sprinklers.
TABLE OF CONTENTS DIVISION 22 - MECHANICAL
TABLE OF CONTENTS DIVISION 22 - MECHANICAL 22 00 00 PLUMBING WORK...1 22 00 01 GENERAL...1 22 00 02 REFERENCES, REGULATORY REQUIREMENTS...1 22 00 03 RELATED SECTIONS of the SPECIFICATIONS...1 22 00 04
SECTION PLUMBING
SECTION 22 10 00 PLUMBING PART 1 GENERAL 1.1 WORK INCLUDED A. Furnish all labor, material and equipment necessary for the complete installation of the sanitary sewer system (including soil and vent piping),
CHILD DEVELOPMENT & LITERACY CENTER H17-N104-CB SGA 17002
SECTION 22 05 00 COMMON WORK RESULTS FOR PLUMBING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. The drawings and general provisions of the Contract, including General and Supplementary Conditions, General
B. Shop Drawings: Include diagrams for power, signal, and control wiring.
SECTION 224213.13 - COMMERCIAL WATER CLOSETS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
DIVISION 22: PLUMBING DESIGN STANDARDS TABLE OF CONTENTS
DIVISION 22: PLUMBING DESIGN STANDARDS TABLE OF CONTENTS I. PURPOSE II. III. IV. GENERAL A. DESIGN DOCUMENTS B. INSPECTIONS C. CLOSE-OUT Project Record Documentation Training D. ENERGY USE E. LABELING
SECTION SECTION DESIGN REQUIREMENTS
SECTION 26 09 SECTION 23 05 23 DESIGN REQUIREMENTS GENERAL DUTY VALVES GENERAL INFORMATION 1.1 This section applies to valves for hydronic and steam systems. DESIGN REQUIREMENTS 2.1 Design Criteria a.
DUKE UNIVERSITY CONSTRUCTION STANDARDS
1 22 40 00 Plumbing Fixtures 1. General A. Definitions 1. Section includes a. Water closets and urinals b. Lavatories, sinks, and service sinks c. Electric water coolers, drinking fountains, d. Showers
SECTION WET-PIPE SPRINKLER SYSTEMS
SECTION 21 1300 S PART 1 -GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
UNIVERSITY SERVICES ANNEX James Madison University Harrisonburg, Virginia State Project Code: Architect s Project Number:
SECTION 211313 - WET-PIPE SPRINKLER SYSTEMS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
BSD Technical Standard. Division 22: Plumbing
Division 22: Plumbing I. PURPOSE This technical standard is a narrative describing Beaverton School District s (BSD s) Basis of Design for mechanical plumbing systems. The information contained herein
EXHIBIT GUIDE Meet Exhibiting Supplier Partners at the Manufacturer/Supplier Council Exhibit
MCAA S AWESOME SUPPLIER PARTNERS EXHIBIT GUIDE Meet Exhibiting Supplier Partners at the Manufacturer/Supplier Council Exhibit TUESDAY, MARCH 5 7:00 A.M. 10:00 A.M. Grand Saguaro Ballroom, JW Marriott Desert
Lasco # Description Picture Lasco # Description Picture
TOILET REPAIR 02-1755 2 Pack, White Toilet Seat Hinge 663353 Washer, 02-3133 664625 3-1/16 O.D. x 2-1/8 I.D. x 3/16, Close Coupled Sponge Gasket, Toilet Tank To Bowl Gasket, Sponge Rubber Tank To Bowl
TABLE OF CONTENTS DIVISION 21- FIRE SUPPRESSION PAGES SECTION WATER BASED FIRE PROTECTION SYSTEMS... 5
DOC Cremer Heating and Hot Water Plant Project Number: M 1411-04 TABLE OF CONTENTS DIVISION 21- FIRE SUPPRESSION PAGES SECTION 21 30 00- WATER BASED FIRE PROTECTION SYSTEMS... 5 SECTION 22 40 00 -PLUMBING
SECTION FIRE PROTECTION. A. Examine all conditions as they exist at the project, prior to submitting a bid for the work of this section
PART 1 - GENERAL 1.00 GENERAL PROVISIONS A. Examine all conditions as they exist at the project, prior to submitting a bid for the work of this section 1.01 DESCRIPTION OF WORK A. Work Included: Provide
Yale University Design Standards
Change History Date Description of Change Pages / Sections Modified Change Approver Initials 3/26/13 Add text encouraging discussion of innovation in 2 15410, A (Summary) SO newly available products. 3/26/13
SECTION HYDRONIC PIPING AND SPECIALTIES
SECTION 15511 HYDRONIC PIPING AND SPECIALTIES PART 1 GENERAL 1.01 SUMMARY A. Section Includes: 1. Pipe Materials. 2. Fittings. 3. Specialty Items. 4. Glycol Antifreeze Protection. 5. Process Cooling B.
B. Shop Drawings: Detail fabrication of pipe anchors, hangers, special pipe support assemblies, alignment guides, expansion joints and loops,
SECTION 23 21 13 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections, apply
PRODUCTS THAT CONSERVE, REPAIR AND SAVE!
please specify sale sale code code when when ordering PBW92 PBW93 valid valid thru thru 5//5 3// - 5/30/5-3/3/ TAP INTO SAVINGS! PRODUCTS THAT CONSERVE, REPAIR AND SAVE! DON'T FORGET... EPA s Fix a Leak
Protected with TechCoat finish. For Ceramic Tile Showers Cast iron Threaded for test nipple Extra heavy (.050) strainer DRAIN CONNECTION
QUICK CONNECT SHOWER DRAIN Protected with TechCoat finish Quick Clamping Gasket And Collar For Ceramic Tile Showers Cast Iron Clamping collar securely attaches drain to drain line Speeds installation Extra
B. Product Data: Provide manufacturers catalogue information. Indicate valve data and ratings.
DIVISION 21 21 05 00 COMMON WORK RESULTS FOR FIRE SUPPRESSION PART 1 GENERAL 1.1 SECTION INCLUDES A. Pipe, fittings, sleeves, escutcheons, seals, and connections for sprinkler systems. 1.2 RELATED REQUIREMENTS
PLUMBING FIXTURES, TRIM, AND SUPPORTS
PART 1 GENERAL 1.01 SUMMARY A. Related Sections: SECTION 15440 PLUMBING FIXTURES, TRIM, AND SUPPORTS 1. 10800 - Toilet Room Accessories 2. 11600 - Laboratory Equipment. 3. 15410 - Piping (Plumbing). 4.
Type A. Part # Description
SHOWER DRAIN ASSEMBLIES MISCELLANEOUS REPLACEMENT GRATES 40800557 40800558 40800373, 40800374 48000341 FOR CERAMIC TILE 40800557 2 x 3 Bolt-down shower drain FOR MARBLE OR FIBERGLASS 40800558 Floor grate
SECTION PLUMBING FIXTURES
CSUEB Pioneer Heights Phase r 15410 Page 1 SECTION 15410 PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
PREFERRED MANUFACTURERS - MECHANICAL
PREFERRED MANUFACTURERS - MECHANICAL GENERAL INFORMATION 1.1 Manufacturers on this list fall into two categories: a. Preferred Manufacturers: indicated in highlighted text, these products are pre-approved.
University of New Hampshire Scholars' Repository
University of New Hampshire University of New Hampshire Scholars' Repository Division 22 Plumbing Chapter 5 Technical Construction and Renovation Standards Fall 9-8-2018 224000 - Plumbing Stephanie L.
DIVISION 21 FIRE PROTECTION ISSUE DATE REVISION
Table of Contents TOC Page 1 DIVISION 21 FIRE PROTECTION ISSUE DATE REVISION 210517 SLEEVES AND SLEEVE SEALS FOR FIRE-SUPPRESSION PIPING 08/15/18 0 210523 GENERAL-DUTY VALVES FOR FIRE PROTECTION PIPING
SECTION SLEEVES AND SLEEVE SEALS FOR FIRE-SUPPRESSION PIPING
SECTION 210517- SLEEVES AND SLEEVE SEALS FOR FIRE-SUPPRESSION PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS. A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
B. Shop Drawings: Include diagrams for power, signal, and control wiring.
SECTION224213.13 -COMMERCIAL WATERCLOSETS PART 1- GENERAL 1.1 SUMMARY Section Includes: 1. Water closets. 2. Flushometer valves. 3. Toilet seats. 1.2 ACTION SUBMITTALS Product Data: For each type of product.
SECTION COMMON WORK RESULTS FOR FIRE SUPPRESSION
PART 1 - GENERAL SECTION 21 05 00 - COMMON WORK RESULTS FOR FIRE SUPPRESSION 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and
SECTION DESIGN REQUIREMENTS DIVISION 23 (HVAC) PREFERRED MANUFACTURERS GENERAL INFORMATION
DIVISION 23 (HVAC) PREFERRED MANUFACTURERS GENERAL INFORMATION 1.1 Manufacturers on this list fall into two categories: a. Preferred Manufacturers: indicated in highlighted text, these products are pre-approved.
DENVER PUBLIC SCHOOLS DESIGN AND CONSTRUCTION STANDARDS This Standard is for guidance only. SECTION PUMPS
PART 0 A/E INSTRUCTIONS 0.01 Design Requirements A. Pumping system design 1. A primary-secondary pumping system is preferred. Redundant pipes are required for chillers and boilers. 2. Select pumps to operate
SECTION WET PIPE FIRE PROTECTION SPRINKLER SYSTEM
SECTION 213100 WET PIPE FIRE PROTECTION SPRINKLER SYSTEM PART 1 - GENERAL 1.01 GENERAL REQUIREMENTS A. The requirements of the General Conditions and Supplementary Conditions apply to all work herein.
SECTION DOMESTIC WATER AND DRAINAGE PIPING SPECIALTIES
PART 1 GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections
B. Utility-furnished products include water meters that will be furnished to the site, ready for installation.
SECTION 211100 - FACILITY FIRE-SUPPRESSION WATER-SERVICE PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
B. Related Sections: The following Sections contain requirements that relate to this Section.
SECTION 211313- FIRE-SUPPRESSION PIPING PART1 -GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general prov1s1ons of the Contract, including General and Supplementary Conditions and Division 1 Specification
$0.98 $ KITCHEN SINK STRAINER, 3-1/2" x BATH TUB DRAIN, 1-15/16" x 2-3/4" x $ $1.89
*s are Subject to Change without Notice.* WASHERS Rubber Beveled 5-1915 CLOSET, 3/8" O.D. TUBE $0.20 5-1916 CLOSET, 1/2" O.D. TUBE $0.20 5-1917 LAVATORY, 1/2" TALL x 3/8" O.D. $0.20 TUBE 5-1849 LAVATORY,
MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 22 PLUMBING
SECTION 221123 - DOMESTIC WATER PUMPS PART 1 - GENERAL 1.1 SUMMARY A. This Section includes the following all-bronze and bronze-fitted centrifugal pumps for domestic cold- and hot-water circulation: 1.
DIVISION 21 FIRE SUPPRESSION SECTION FIRE PROTECTION SPECIALTIES
DIVISION 21 FIRE SUPPRESSION PART 1 GENERAL 1.01 DESCRIPTION A. Provide UL listed, FM approved listed fire protection specialties or accessories as required by either the equipment manufacturer or the
PROJ. NO SECTION METERS AND GAGES FOR HVAC PIPING
SECTION 23 05 19 METERS AND GAGES FOR HVAC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division
MASTERSPEC TECHNICAL SPECIFICATIONS DIVISION 21 FIRE SUPPRESSION
SECTION 211313 - WET-PIPE SPRINKLER SYSTEMS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipes, fittings, and specialties. 2. Fire-protection valves. 3. Fire-department connections. 4. Sprinklers.
FIRE SUPPRESSION SPRINKLER SYSTEM
PART 1 GENERAL 1.01 DESCRIPTION A. The provisions of the General Requirements, Supplementary Requirements, and Division 1 apply to the plumbing work specified in this Division. B. The requirements of this
TUBS & SURROUNDS FIBERGLASS TUB STANDARD FIBERGLASS GARDEN TUB
TUBS & SURROUNDS FIBERGLASS TUB STANDARD One-piece design for a clean, simple design; left, right, or center drain. 309525 54 x 28 Center White 309530 54 x 28 Center Bone 309535 54 x 28 LH Bone 309540
SECTION PLUMBING SPECIALTIES
Ellchtel/Perkins Community Leamine Center GPD - 2007271.15 SECTION 15430 PLUMBING SPECIALTIES PART 1- GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General
PARTS STOCKED REPLACEMENT FAUCET BIBB SCREWS... SCREW ASSORTMENT MISC. 3 /8" BIBB LOC SCREW 1 /2" BIBB SCREW 1 /2" BIBB LOC SCREW 3 /8" BIBB SCREW
January 1, 2001 STOCKED REPLACEMENT FAUCET BIBB SCREWS... Parts-5L 3 /8" BIBB SCREW 6-32 GAUGE CHROME 35138- No. 1 3 /8" BIBB SCREW 10-24 GAUGE CHROME 35153- No. 16 3 /8" BIBB SCREW 8-32 GAUGE CHROME 35141-
SECTION (15486) - FUEL-FIRED, DOMESTIC WATER HEATERS
SECTION 22 34 00 (15486) - FUEL-FIRED, DOMESTIC WATER HEATERS System shall provide a complete hot water return throughout the entire system with balancing (flow control) valves not less than 10 feet from
FIRE PROTECTION BASIC MATERIALS AND METHODS 1.01 RELATED CORNELL DESIGN AND CONSTRUCTION STANDARDS
210500 FIRE PROTECTION BASIC MATERIALS AND METHODS PART 1 GENERAL 1.01 RELATED CORNELL DESIGN AND CONSTRUCTION STANDARDS A. Section 087100 Door Hardware B. Section 220500 Plumbing Basic Materials and Methods
HYDRONIC SPECIALTIES TACO AC(F)-CA 05/08/2008
SECTION 15181 - HYDRONIC SPECIALTIES PART 1 - GENERAL 1.1 SECTION INCLUDES A. Air separators B. Expansion tanks C. Pump accessories 1.2 RELATED SECTIONS A. Section - Plumbing Piping Specialties B. Section
Planting Irrigation
University of New Hampshire University of New Hampshire Scholars' Repository Division 32 Exterior Improvements Chapter 5 Technical Construction and Renovation Standards 1-25-2013 328400 - Planting Irrigation
Division 23 - HVAC Switzerland Beallsville K-12. Section HYDRONIC PIPING SECTION HYDRONIC PIPING PART 1 - GENERAL
Division 23 - HVAC 090070 Switzerland Beallsville K-12 Section 23 21 13 HYDRONIC PIPING SECTION 23 21 13 HYDRONIC PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and General Provisions of the
HYDRONIC SPECIALTIES TACO MPT Tank(s) 05/30/2012. A. Multi-Purpose Tank buffer tank, air separator, and hydraulic decoupler
SECTION 15181 - HYDRONIC SPECIALTIES PART 1 - GENERAL 1.1 SECTION INCLUDES A. Multi-Purpose Tank buffer tank, air separator, and hydraulic decoupler B. Expansion tanks C. Pump accessories 1.2 RELATED SECTIONS
A. General: comply with appropriate standards. 1. International Association of Plumbing and Mechanical Officials: IAPMO. 2. California State AB 1953.
SECTION 22 40 00 - PLUMBING FIXTURES PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Water closets. 2. Urinals. 3. Lavatories. 4. Sinks. 5. Service sinks. 6. Electric water coolers. 7. Wash fountains.
1.02 SUMMARY A. This Section includes piping and specialties for combined potable-water and fire-protection water service outside the building.
SECTION 02510 WATER DISTRIBUTION PART 1 - GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
A. This Section includes the following emergency plumbing fixtures:
Page 224500-1 SECTION 224500 - PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification Sections,
SECTION PLUMBING SPECIALTIES
DIVISION 22 PART 1 GENERAL 1.01 SCOPE SECTION 22 0430 PLUMBING SPECIALTIES A. Domestic water, sewer, roof drainage and condensate drains, including piping, equipment and all necessary accessories as designated
CUSTOMIZED TEACHER ASSESSMENT BLUEPRINT PLUMBING. Test Code: 5924 Version: 01
CUSTOMIZED TEACHER ASSESSMENT BLUEPRINT PLUMBING Test Code: 5924 Version: 01 Specific competencies and skills tested in this assessment: Safety Follow rules for fire safety Follow rules for housekeeping
ADDENDUM NO. 3 March 19, 2018
ADDENDUM NO. 3 March 19, 2018 PROJECT: MT. VIEW ELEMENTARY CASSIA SCHOOL DISTRICT NO 151 BURLEY, IDAHO The following addenda apply to the Project Manual and / or Drawings for this project and shall be
ADDENDUM #3 DATE: August 8, 2018 Page 1 of 1. The Curators of the University of Missouri
ADDENDUM #3 DATE: August 8, 2018 Page 1 of 1 TO CONTRACT DOCUMENTS ENTITLED: PROJECT MANUAL FOR: Women s and Children s Hospital New Water Service Main PROJECT NUMBER: CP172631 ADVERTISEMENT DATE: July
Valve Pressure and Temperature Ratings: Not less than indicated and as required for system pressures and temperatures.
SECTION 220523 - VALVES PART 1 - GENERAL 1.1 SUMMARY This Section includes the following general-duty valves: 1. Copper-alloy ball valves. 1.2 SUBMITTALS Product Data: For each type of valve indicated.
SECTION FIRE-SUPPRESSION PIPING
SECTION 211313 FIRE-SUPPRESSION PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 1 Specification
. ECTION METERS AND GAGES
. ECTION 230519 - METERS AND GAGES PART I - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Divisions 00 thru 01 Specification
HYDRONIC SPECIALTIES TACO AC(F)-PAX 05/15/2008
SECTION 15181 - HYDRONIC SPECIALTIES PART 1 - GENERAL 1.1 SECTION INCLUDES A. Air separators B. Expansion tanks C. Pump accessories 1.2 RELATED SECTIONS A. Section - Plumbing Piping Specialties B. Section
OKLAHOMA STATE UNIVERSITY - BUILDING DESIGN STANDARDS
Page 1 PART 1 GENERAL 1.1 SUMMARY A. Work of this section includes providing basic mechanical materials including, but not limited to, the following: 1. Valves. 2. Pipe expansion joints. 3. Supports and