DuPont ISCEON 9 Series Refrigerants

Transcription

1 ISCEON 9 Series Refrigerants P R O D U C T I N F O R M A T I O N G U I D E Refrigerants. The Science of Cool. TM de Nemours International S.A. 2 Chemin du Pavillon P.O. Box 50 CH-1218 Le Grand-Saconnex Geneva, Switzerland Tel: Fax: EU-info@dupont.com Copyright All rights reserved. The Oval Logo,, The miracles of science, The Science of Cool and ISCEON are registered trademarks or trademarks of or its affiliates. K /08

2 pioneered much of the science that makes air conditioning and refrigeration possible. With over 75 years of proven leadership in s science and technology, we offer the broadest range of solutions for new and existing equipment, and we are committed to leveraging The Science of Cool to lead the search for new cooling solutions that improve comfort and enhance the quality of life around the world. This guide contains information on our full line of ISCEON 9 Series Refrigerants to help you select the best for your application. Additional product information is available on our website, or by contacting your local Refrigerants distributor. ISCEON 9 Series Refrigerants Efficient and cost effective, Non-ozone-depleting, HFC retrofit s for CFC and HCFC equipment. ISCEON MO29 Multi-purpose replacement for R-22 in direct expansion equipment (Air Conditioning and Medium/Low Temperature Refrigeration) ISCEON 39TC R-12 in centrifugal chillers ISCEON MO49Plus R-12, R-413A, R-401, R-409A in automotive air conditioning and stationary air conditioning/refrigeration ISCEON MO59 Best suited to replace R-22 in small A/C (<15kW) systems ISCEON MO79 Best suited as a replacement for : R502, R402, R403, R408 series blends ISCEON MO89 R-13B1 in very low-temperature refrigeration Efficient and cost-effective. Compatible with traditional and new lubricants. Avoid costly equipment replacement. Available from a name you can trust. Refrigerants. The Science of Cool. We ve worked hard to build a website that works as hard as you do with customized sections dedicated to OEMs, distributors, service technicians and end users for a better, more efficient way to explore cooling solutions. When you re looking for high-quality, high-performance cooling solutions from a trusted source, visit 2 3

3 ISCEON MO29 ISCEON MO29 is one of the leading multipurpose replacements for R-22 in existing direct expansion water chiller systems, residential, commercial air conditioning and medium/low temperature refrigeration systems. R-422D R-22 Multi-purpose replacement for R-22 in direct expansion equipment (air conditioning, water chiller systems and medium/low temperature refrigeration). Non-ozone-depleting HFC retrofit s in most cases, no change of lubricant type is needed Enables continued use of existing equipment Close match to R-22 capacity and efficiency in most systems Lower discharge temperature vs. R-22-likely to prolong the life of the compressor in some systems ISCEON MO29 is compatible with traditional and new lubricants, including mineral oil, alkylbenzene and polyol ester. In most cases, no change of lubricant type during retrofit is needed. See Product Information Bulletin and retrofit guidelines for additional information. ISCEON 39TC ISCEON 39TC is one of the leading, non-ozonedepleting HFC retrofit s for R-12 in centrifugal chillers. R-423A R-12 Centrifugal chillers designed for R-12 Non-ozone-depleting HFC retrofit s Retrofit typically requires a single lubricant change to polyol ester without additional flushing Avoids expensive engineering changes to existing chiller equipment Enables cost-effective, continued use of existing chiller equipment Provides required cooling capacity and comparable energy efficiency vs. R-12 Similar discharge temperature and pressure vs. R-12 For most systems, only one lubricant change to polyol ester during retrofit is required. ISCEON 39TC tolerates high residual levels of mineral oil in polyol ester; therefore, no system flushing is generally required after changing the original lubricant to polyol ester. See ISCEON 39TC Retrofit Guidelines for more details. 4 5

4 ISCEON MO49Plus ISCEON MO49Plus is a cost-effective, non-ozonedepleting HFC retrofit for R-12 automotive and stationary air conditioning in direct expansion mediumtemperature stationary refrigeration systems. R-437A (pending) TM R-12, R-413A, HCFC-containing blends (e.g. MP39, MP66, R-409A) Automotive AC systems designed for R-12 Refrigeration systems, designed for R-12 including: food service supermarket display cases food storage and processing domestic refrigerators/freezers Provides cost-effective retrofits Non-ozone-depleting HFC retrofit in most cases, no change of lubricant type is needed Enables continued use of existing equipment ASHRAE safety classification of A1 (see AS-1 bulletin and MSDS) Provides up to 10% better cooling capacity vs. R-12 Provides similar to slightly lower energy efficiency vs. R-12 Lower discharge temperature vs. R-12 For R-12 automotive air conditioning systems, ISCEON MO49Plus is compatible with mineral oil in existing R-12 systems. In most cases, no change of lubricant type during retrofit is needed. For R-12 stationary medium-temperature refrigeration and air conditioning systems, ISCEON MO49Plus is compatible with traditional and new lubricants mineral oil, alkylbenzene and polyol ester. In most cases, no change of lubricant type during retrofit is needed. Refer to ISCEON MO49Plus Retrofit Guidelines for more details. ISCEON ISCEON MO59 is an efficient and cost-effective, non-ozone-depleting HFC retrofit for R-22 in direct expansion air conditioning. Best suited to replace R-22 in small A/C (<15kW) systems R-417A R-22 MO59 Split air conditioning systems Note: for water chillers ISCEON MO29 is recommended Non-ozone-depleting HFC retrofit s in most cases, no change of lubricant type during retrofit is required Enables the continued use of existing equipment ASHRAE safety classification of A1 (see AS-1 bulleting and MSDS) Lower discharge temperature and pressure vs. R-22-likely to prolong the life of the compressor Has been shown to offer energy savings in some systems ISCEON MO59 is compatible with traditional and new lubricants, including mineral oil, alkylbenzene and polyol ester. In most cases, no change of lubricant type during retrofit is needed. See the ISCEON MO59 Retrofit Guidelines for more details. 6 7

5 ISCEON MO79 ISCEON MO79 is one of the leading non-ozone depleting HFC s for replacing R-502 and R-402, R-403 and R-408 series HCFC-containing blends in commercial and industrial direct expansion refrigeration systems. R-422A R-22, R-502, HCFC-containing blends Best suited as a replacement for: R502, R402, R403, R408 series blends. Also R-22 in certain low temperature applications. -easier retrofit than R-404A and R-507 Non-ozone-depleting HFC retrofit s in most cases, no change of lubricant type during retrofit is required Enables continued use of existing equipment 20% lower Global Warming Potential (GWP) vs. R-404A and R-507 Provides improved cooling capacity over R-22 at many operating conditions with up to +15% at low-temperature conditions Provides comparable cooling capacity to R-404A and R-507 Field testing shows it can provide improved energy efficiency vs. R-22 Lower discharge temperature vs. R-22-likely to prolong the life of the compressor ISCEON MO89 ISCEON MO89 is a non-ozone-depleting HFC retrofit for R-13B1 in very low-temperature direct expansion refrigeration systems. None assigned R-13B1 Very low-temperature refrigeration (below 40 C to 70 C), including: freeze driers medical freezers environmental chambers Non-ozone-depleting HFC Compatible with traditional and new lubricants in most cases, no change of lubricant type during retrofit is needed After retrofit, can be topped off during service without removing the entire charge Provides cooling capabilities similar to R-13B1 ISCEON MO89 is compatible with traditional and new lubricants mineral oil, alkylbenzene and polyol ester. In most cases, no change of lubricant type during retrofit is needed. See the ISCEON MO89 Retrofit Guidelines for details. ISCEON MO79 is compatible with traditional and new lubricants, including mineral oil, alkylbenzene and polyol ester. In most cases, no change of lubricant type during retrofit is needed. See the ISCEON MO79 Retrofit Guidelines for details. 8 9

6 Safe Handling Like the s they replace, ISCEON 9 Series Refrigerants are safe to use when handled properly. Because any can be hazardous when improperly handled, refer to the Material Safety Data Sheet (MSDS) for proper handling procedures. For additional safety information on ISCEON 9 Series Refrigerants, refer to bulletin Safety of Refrigerants (AS-1). For detailed information on the Properties, Uses, Storage and Handling (PUSH) of ISCEON 9 Series Refrigerants, refer to the appropriate PUSH bulletin. Product Availability ISCEON 9 Series Refrigerants are available from our global network of Refrigerant distributors. To find the local Refrigerant distributor nearest to you, visit Refrigerants Vision: The Science of Cool We will use our science and technology, market knowledge and global reach to provide sustainable materials and solutions to enhance personal comfort, enable food preservation, improve industrial processing and reduce environmental footprints. or call us at or fax at or at EU-info@dupont.com 10 11