SUPER AD-30 Parts Manual 24 VAC Phase thru 2000

Transcription

1 SUPER AD-30 Parts Manual 24 VAC Phase thru 2000 MODELS: ADG-30DS ADE-30S ADS-30S American Dryer Corporation 88 Currant Road Fall River, MA Telephone: (508) / Fax: (508) techsupport@amdry.com WM/mcronan ADC Part No

2 Retain This Manual In A Safe Place For Future Reference American Dryer Corporation products embody advanced concepts in engineering, design, and safety. If this product is properly maintained, it will provide many years of safe, efficient, and trouble-free operation. ONLY qualified technicians should service this equipment. OBSERVE ALL SAFETY PRECAUTIONS displayed on the equipment or specified in the installation/operator's manual included with the dryer. The following FOR YOUR SAFETY caution must be posted near the dryer in a prominent location. FOR YOUR SAFETY Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance. POUR VOTRE SÉCURITÉ Ne pas entreposer ni utiliser d essence ni d autres vapeurs ou liquides inflammables dans le voisinage de cet appareil ou de yout autre appareil. We have tried to make this manual as complete as possible and hope you will find it useful. ADC reserves the right to make changes from time to time, without notice or obligation, in prices, specifications, colors, and material, and to change or discontinue models. Important For your convenience, log the following information: DATE OF PURCHASE DISTRIBUTORS NAME Serial Number(s) MODEL NO. SUPER AD-30 Replacement parts can be obtained from your distributor or the ADC factory. When ordering replacement parts from the factory, you can FAX your order to ADC at (508) or telephone your orders directly to the ADC Parts Department at (508) Please specify the dryer model number and serial number in addition to the description and part number, so that your order is processed accurately and promptly. The illustrations on the following pages may not depict your particular dryer exactly. The illustrations are a composite of the various dryer models. Be sure to check the descriptions of the parts thoroughly before ordering. IMPORTANT NOTE TO PURCHASER Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer.

3 Table of Contents Control Door Assembly Without Trim... 3 High Security Control Door Assembly... 4 Phase 5 Coin Microprocessor Control Panel Assembly... 5 Phase 5 OPL Microprocessor Control Panel Assembly... 6 Phase 5 OPL and Coin Microprocessor Control Box Assembly... 7 Coin Vault Assembly... 8 Dual Timer Tap Touch Controls... 9 Dual Timer Control Panel Assembly Dual Timer Control Box Assembly Non-Microprocessor Coin Meter Control Panel Assembly Non-Microprocessor Coin Meter Control Box Assembly Slide Meter Case Assembly Slide Meter Control Box Coin Meter Replacement Parts Lint Trap Assembly Drop Lint Door Assembly Without Trim Drop Lint Door Assembly... 19, 20 Main Door Steel Assembly Plastic Main Door Assembly Main Door Switch Assembly Cold Rolled Steel (CRS) Door Plastic Main Door Switch Assembly Cold Rolled Steel (CRS) Door Front Panel... 25

4 Plastic Door Front Panel Assembly Basket (Tumbler)/Support Assemblies Basket (Tumbler) Bearing Assembly... 28, 29 Idler Bearing Assembly... 30, 31 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly... 32, 33 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly... 34, 35 Sensor Bracket Assemblies... 36, 37 Direct Spark Ignition (DSI) Burner Assembly... 38, 39 Electric Oven Assembly... 40, 41 Single-Phase (3ø) Motor, Electric Relay Panel Assembly Phase (3ø) Motor, Electric Relay Panel Assembly Microprocessor Reversing Rear Control Box Assembly Dual Timer Reversing Rear Control Box Assembly Steam Coil/Air Operated Steam Damper Assembly... 46, 47 Steam Coil/Mechanical Steam Damper Assembly... 48, 49 Sail Switch/Hi-Limit Assembly Outer Top/Back Guard Assembly Coin Acceptor Listing Step Down Transformer Usage Listing for Gas/Steam Dryers Transformer Usage Listing for Electric Dryers Electric Oven Component Application Chart Additional Parts Available... 56

5 Control Door Assembly Without Trim 3 For OPL (Non-Coin) Models Mfd. as of July 19, ADC Logo ONLY (with double adhesive tape) Logo Double Adhesive Tape Kit ONLY * 1 Control Door (includes illus. nos. 2 and 3) Stainless Steel Control Door (includes illus. nos. 2 and 3) Neoprene Sponge Tape (sold by the foot) #10 x 1/2 Hex Washer TEK Screw Control Door Rod Support Catch Control Door Rod Retainer Clip Control Door Support Rod Spring Turn Latch Assembly * Specify color when ordering. Telephone: (508) Fax: (508)

6 4 High Security Control Door Assembly For ALL Coin Models and ONLY OPL Models Mfd. prior to July 19, High Security MK-100 Lock Assembly with Key (for Coin Models Only) MK-100 Key ONLY Special Dummy Lock ONLY (for Non-Coin Models Only) Lock Cam ONLY ADC Logo with Tape (for ALL Coin Models Only) Metal ADC Logo with Tape (for ALL OPL Models Only) Logo Double Tape Kit ONLY 4* High Security Control Door Assembly less Lock (includes illus. nos. 4 through 7) High Security Stainless Steel Control Door Assembly Less Lock (includes illus. nos. 4 through 7) Top Trim with Lock Hole Trim Bumper Gasket (sold by the foot) #10-32 x 1/4" Phillips Round Head Machine Screw #10 x 1/2" Hex Washer TEK Screw Control Door Support Rod Catch Control Door Rod Retainer Clip Control Door Support Rod * Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA

7 Phase 5 Coin Microprocessor Control Panel Assembly Coin Keyboard Label Assembly Phase 5 Coin Control Panel Assembly (includes illus. nos. 1, 2, 4 through 6, and 11) Phase 5 Coin Control Panel Assembly with Battery Option (includes illus. nos. 1, 2, 4 through 6, and 11) Coin Control Panel ONLY Coin Control Panel with Battery Bracket #10-16 x 1/2" Hex Head TEK Crimptite Screw Phase 5 Coin Microprocessor Controller (computer) ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 1/4" Phillips Round Head Machine Screw Microprocessor Coin Acceptor with Optical Switch (refer to Microprocessor Coin Acceptor Listing on page 52) * Optic Switch ONLY * Optic Switch Connector ONLY * Microprocessor Socket ONLY Single Coin Optical Switch Harness Dual Coin Optical Switch Harness Microprocessor (female) Pin Extraction Tool /8-Amp (Slo Blo) Fuse * For Dual Coin Models double the quantity. IMPORTANT: Check label on computer chip to verify correct part number for controller. Telephone: (508) Fax: (508)

8 6 Phase 5 OPL Microprocessor Control Panel Assembly OPL English Keyboard Label Assembly OPL Stick-on Labels (English Only)...Not Illustrated OPL Stick-on Labels (Spanish, Italian, and Hebrew)...Not Illustrated Language OPL Stick-on Labels (English, Spanish, and Hebrew)...Not Illustrated Language OPL Stick-on Labels (Italian, Dutch, French, German, and Chinese)...Not Illustrated Phase 5 Microprocessor Control Panel ONLY Phase 5 Microprocessor Control Panel ONLY with Battery Bracket Phase 5 OPL Non-Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6 and 7) Phase 5 OPL Reversing Microprocessor Control Panel Assembly Complete (includes illus. nos. 1 through 6 and 7) Phase 5 OPL Non-Reversing Microprocessor Controller (computer) ONLY Phase 5 OPL Reversing Microprocessor Controller (computer) ONLY Phase 5 Battery Clip #6 Star Washer #6-32 x 3/4" Phillips Round Head Machine Screw #10-16 x 1/2" Hex Head TEK Crimptite Screw /8-Amp (Slo Blo) Fuse IMPORTANT: Check label on computer chip to verify correct part number for controller (computer). American Dryer Corporation 88 Currant Road / Fall River, MA

9 Phase 5 OPL and Coin Microprocessor Control Box Assembly Transformer - 24 VAC (refer to Transformer Usage Listings on page 53 and page 54) #10 x 1/2" Hex Washer TEK Screw Position Terminal Block #6-32 x 1" Slotted Round Head Machine Screw #6-32 Pal Nut * 1/2-Amp (Slo Blo) Fuse * #8 x 7/16" Phillips Pan Head TEK Screw * Fuse Block/Strip ONLY Pin Microprocessor Connector * Socket Steam Valve Relay - 24 VAC (for Mechanical Steam Damper Models Only) #10-16 x 1/2" Hex Head TEK Crimptite Screw Motor Capacitor (for Mechanical Steam Damper Models Only) Capacitor Bracket (for Mechanical Steam Damper Models Only) #10 x 1/2" Hex Washer TEK Screw Transformer (for Mechanical Steam Damper with 208 volt and higher models) #10 x 1/2" Hex Washer TEK Screw * As required. Telephone: (508) Fax: (508)

10 8 Coin Vault Assembly Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) Microprocessor Coin Vault ONLY Non-Microprocessor Coin Vault Assembly Complete (includes illus. nos. 1 through 6) Non-Microprocessor Coin Vault ONLY Cam for 1/4 Turn Lock ONLY /4 Turn Lock with Key and Cam * 1 1/4 Turn Mer-Pel Key ONLY /4 Turn Coin Box Assembly (includes illus. nos. 2 through 5) /4 Turn Coin Box ONLY without Face Plate High Security (Greenwald) Coin Box ONLY with Key /4 Turn Coin Box Face Plate Assembly (includes illus. nos. 2 through 5) /4-20 Free Spin Wash Nut Control Door Support Rod Control Door Rod Retainer Clip Control Door Rod Catch * Specify key number when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA

11 Dual Timer Tap Touch Controls 9 For Models Mfd. as of November 1, Minute Timer - 24 VAC Minute Timer - 24 VAC Red Pilot Light - 24 VAC Tap Touch Switch Relay SPST 24v Position Terminal Block #6-32 Pal Nut Dual Timer Panel Complete (includes illus. nos. 1 through 15) Dual Timer Panel ONLY #6 Star Washer #6-32 Hex Nut #10-24 x 1/2 Phillips Pan Head Machine Screw #8-32 x 1/4 Phillips Round Head Machine Screw Dual Timer Panel Overlay Pure Touch Knob with Red Pointer Pure Touch Knob with Blue Pointer Telephone: (508) Fax: (508)

12 10 Dual Timer Control Panel Assembly For Models Mfd. prior to November 1, Red Indicator Light - 24 VAC Rocker Heat Selector Switch Dual Timer Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 21) Dual Timer Control Panel ONLY Push-to-Start Relay - 24 VAC #10-24 x 1/2" Round Head Machine Screw #10-24 Speed Nut #6-32 Hex Nut #6 Star Washer Position Terminal Block #6-32 x 1" Round Head Machine Screw #8-32 x 1/4" Phillips Machine Screw #6-32 x 1/2" Round Head Machine Screw Dual Timer Relay - 24 VAC #6-32 Pal Nut Dual Timer Label ONLY #10-16 x 1/2" Hex Head TEK Crimptite Screw (for models mfd. as of March 1, 1994) Piece Spring Turn Latch (for models mfd. as of March 1, 1994) Arrow Timer - 24 VAC Minute Timer - 24 VAC Minute Timer - 24 VAC Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool American Dryer Corporation 88 Currant Road / Fall River, MA

13 Dual Timer Control Box Assembly Pin Socket Connector Socket Terminal ONLY Pin/Socket Extraction Tool Pin Connector Bracket #10 x 1/2" Hex Washer TEK Screw #10 x 1/2" Hex Washer TEK Screw Transformer - 24 VAC (refer to Transformer Usage Listings on page 53 and page 54) #10-16 x 1/2" Hex Head TEK Crimptite Screw Steam Valve Relay - 24 VAC (for Mechanical Steam Damper Models Only) * Fuse Block/Strip ONLY 10** * 1/2-Amp (Slo Blo) Fuse * #8 x 7/16" Phillips Pan Head TEK Screw #6-32 x 1" Slotted Round Head Machine Screw Position Terminal Block #6-32 Pal Nut Transformer (for Mechanical Steam Damper with 208 volt and higher models) #10 x 1/2" Hex Washer TEK Screw * As required. ** Check fusing on dryer for verification. Telephone: (508) Fax: (508)

14 12 Non-Microprocessor Coin Meter Control Panel Assembly Red Indicator Light - 24 VAC Rocker Heat Selector Switch Coin Meter Control Panel Assembly Complete - 24 VAC (includes illus. nos. 1 through 6 and 8 through 12) Coin Meter Control Panel ONLY Push-to-Start Relay - 24 VAC #10-24 x 1/2" Round Head Machine Screw #10-24 Speed Nut 7* Coin Meter - 24 VAC (specify timing) #6 Star Washer (for models mfd. as of December 11, 1998) #4-40 Hex Nut (for models mfd. as of December 11, 1998) #4 x 3/4" Pan Head "A" Screw...Not Illustrated (for models mfd. prior to December 11, 1998) Position Terminal Block #10-16 x 1/2" Hex Head TEK Crimptite Screw Piece Spring Turn Latch (used on models mfd. prior to March 1, 1994) Pin Connector ONLY Pin Terminal ONLY Pin/Socket Extraction Tool * Consult factory for coin meters not listed. American Dryer Corporation 88 Currant Road / Fall River, MA

15 Non-Microprocessor Coin Meter Control Box Assembly Pin Socket Connector Socket Terminal ONLY Pin/Socket Extraction Tool Pin Connector Bracket #10 x 1/2" Hex Washer TEK Screw #10 x 1/2" Hex Washer TEK Screw Transformer - 24 VAC (refer to Transformer Usage Listings on page 53 and page 54) #10-16 x 1/2" Hex Head TEK Crimptite Screw Steam Valve Relay - 24 VAC (for Mechanical Steam Damper Models Only) * Fuse Block/Strip ONLY 10** * 1/2 Amp (Slo Blo) Fuse * #8 x 7/16" Phillips Pan Head TEK Screw #6-32 x 1" Slotted Round Head Machine Screw Position Terminal Block #6-32 Pal Nut Transformer (for Mechanical Steam Damper with 208 volt and higher models) #10 x 1/2" Hex Washer TEK Screw * As required. ** Check fusing on dryer for verification. Telephone: (508) Fax: (508)

16 14 Slide Meter Case Assembly MAN1625 1* Key ONLY for Slide Meter Lock Lock/Key/Cam and Hardware Slide Meter Accumulator - 24 VAC /4-20 Free Spin Wash Nut Slide Meter Case ONLY with Door Less Locks /4" Drive Rivet Slide Meter Extension ONLY with Mirror (includes illus. nos. 7 and 8) Stainless Steel Mirror ONLY Typical Slide Meter Coin Chute (not available from ADC) Typical Slide Meter Coin Box (not available from ADC) Slide Meter Case Mounting Plate Control Door Support Rod Control Door Rod Retainer Clip Control Door Support Rod Catch Rocker Heat Selector Switch Red Indicator Light - 24 VAC Push to-start Relay - 24 VAC * Specify key number when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA

17 Slide Meter Control Box Pole Contactor - 24 VAC #10 x 1" Hex Head Screw RC Network with Connectors #10 x 1/2" Hex Washer TEK Screw VAC Control Voltage Transformer (refer to Transformer Usage Listings on page 53 and page 54) * 1/2 Amp (Slo-Blo) Fuse * #8 x 7/16" Phillips Pan Head TEK Screw * Fuse Block/Strip ONLY #6-32 x 1" Round Head Machine Screw Position Terminal Block #6-32 Pal Nut Back Electrical Box Cover...Not Illustrated #8-18 x 7/16" Phillips Pan Head TEK Screw...Not Illustrated * As required. Telephone: (508) Fax: (508)

18 16 Coin Meter Replacement Parts /60 RPM - 60 Hz Meter Motor - 24 VAC /30 RPM - 50 Hz Meter Motor - 24 VAC Point Cam Point Cam Point Cam Point Cam Point Cam Point Cam Point Cam Point Cam Point Cam Meter Switch "B" with Arm Meter Switch "A" or "C" American Dryer Corporation 88 Currant Road / Fall River, MA

19 Lint Trap Assembly Lint Trap Assembly Complete (includes illus. nos. 1 and 3 through 5) Lint Trap ONLY /32" Pop Rivet #10 x 1/2" Hex Washer TEK Screw Lint Screen Hold Down Lint Screen ONLY #6 x 1/2" Tamperproof TEK Screw Chain For Drop Lint Door Tamperproof Screw Hand Driver Telephone: (508) Fax: (508)

20 18 Drop Lint Door Assembly Without Trim For OPL (Non-Coin) Models Mfd. as of July 19, 1999 Illus. No. Part. No. Qty. Description Knob Latch Kit Assembly (includes illus. nos. 1 and 2) AD-100 Lock Assembly with Key (for coin models Only) AD-100 Key ONLY Dummy Lock ONLY (for non-coin models) MK-100 Key ONLY (for dummy lock) Lock Cam For AD-100 and Dummy Lock Knob Latch Adjustable Cam ONLY #12-24 x 3/8" Round Head Machine Screw ONLY (screw for knob latch adjustable cam) Drop Lint Door Spring Insulated Drop Lint Door Assembly (includes illus. nos. 4 and 5) Neoprene Sponge Tape (sold by the foot) #6 x 1/2" Tamperproof TEK Screw Chain For Drop Lint Door (10-1/2" length) Tamperproof Screw Hand Driver * Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA

21 Drop Lint Door Assembly For ALL Coin Models and ONLY OPL Models Mfd. prior to July 19, Telephone: (508) Fax: (508)

22 20 Drop Lint Door Assembly AD-100 Lock Assembly with Key AD-100 Key ONLY Knob Latch Kit Assembly (for non-coin models Only) (includes illus. nos. 1 and 2) Dummy Lock ONLY (for non-coin models Only) MK-100 Key ONLY Lock Cam for AD-100 Lock Knob Latch Adjustable Cam (for non-coin models Only) #12-24 x 3/8" Round Head Machine Screw (for knob latch adjustable cam) Drop Lint Door Spring * 1 Drop Lint Door Assembly (includes illus. nos. 4 through 8) * 1 Insulated Drop Lint Door Assembly (includes illus. nos. 4 through 8) Stainless Steel Drop Lint Door Assembly #10-32 x 1/4" Phillips Pan Head Machine Screw Neoprene Sponge Tape (sold by the foot) (for models mfd. as of August 6, 1998) Noise Suppressor Tape (sold by the foot) (for models mfd. prior to August 6, 1998) Suppressor Tape/Gasket (sold by the foot) (for models mfd. as of February 8, 1995) Trim/Kick Plate (31-1/8" length) #6 x 1/2" Tamperproof Screw Tamperproof Screw Hand Driver Chain For Drop Lint Door * Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA

23 Main Door "Steel" Assembly For OPL Models ONLY Mfd. as of November 3, Black Main Door Assembly Complete (includes illus. nos. 1, 2, and 8 through 15) Door Gasket Clear Glass Adhesive (10.3 oz. cartridge) Black Glass Adhesive (10.3 oz. cartridge) Black Top Hinge Block Assembly (includes illus. nos. 3 and 4) /4-20 x 3/4" Black Cap Head Setscrew /4" Nylon Washer Black Bottom Hinge Block Assembly (includes illus. nos. 5, 6, and 7) /4-20 x 3/4" Black Cap Head Setscrew /4-20 x 3/4" Stainless Steel Cap Head Setscrew /4-20 x 5/8" Black Carriage Bolt /4-20 Free Spin Wash Nut #10-32 Black Hex Acorn Nut Door Latch Screw /4-20 x 5/8" Black Carriage Bolt /4-20 Free Spin Wash Nut Black Main Door Handle ONLY /16" Door Glass Glass/Door Gasket Tape (for models mfd. as of February 9, 2001) Black Glass Adhesive (10.3 oz. cartridge) (for models mfd. prior to February 9, 2001) #10-32 Black Nylon Acorn Nut Telephone: (508) Fax: (508)

24 22 Plastic Main Door Assembly For OPL and ALL Coin Models Mfd. prior to November 3, Gray Plastic Main Door Assembly Complete with Mechanical Fasteners (includes illus. nos. 1 and 5 through 9) /2" Stainless Steel Main Door Hinge Assembly #10-24 x 3/8" Phillips Pan Head Taptite Screw /4-20 Free Spin Wash Nut Main Door Gasket /16" Door Glass with (4) Holes Main Door Glass Adhesive (10.3 oz. cartridge) /2" Stainless Steel Flat Head Allen Screw Door Glass (Nylon) Spacer Main Door Latch Screw (#10 x 7/16" Dome Hex Head) American Dryer Corporation 88 Currant Road / Fall River, MA

25 Main Door Switch Assembly Cold Rolled Steel (CRS) Door For OPL Models ONLY Mfd. as of November 3, #6-32 x 7/8" Clinch Stud #6-32 Hex Nut 1/4" ATF Zinc Plated #6 Star Washer Single-Pole Door Switch (SDS) Flag Terminal Main Door Switch Housing #8-18 x 7/16" Phillips Pan Head TEK Screw Telephone: (508) Fax: (508)

26 24 Plastic Main Door Switch Assembly For OPL and ALL Coin Models Mfd. prior to November 3, #6-32 Hex Nut #6 Lock Washer Single Pole Door Switch Insulated Female Terminal /8" Standard Nylon Spacers /2" Stainless Steel Main Door Hinge Assembly (includes illus. nos. 6 and 7) #6 Stud Main Door Switch Housing ONLY #10-32 x 1 / 4" Phillips Pan Head Screw Rubber Grommet American Dryer Corporation 88 Currant Road / Fall River, MA

27 Cold Rolled Steel (CRS) Door Front Panel For OPL Models ONLY Mfd. as of November 3, * 1 Right Hand Front Panel Assembly (CRS door) (includes illus. nos. 1 through 3) Stainless Steel Front Panel Assembly (CRS door) (includes illus. nos. 1 through 3) * 1 Left Hand Front Panel Assembly (CRS door) (includes illus. nos. 1 through 3) /8 Pop Rivet Friction Door Latch #10-16 x 1/2" Hex Washer TEK Screw #10-16 x 1/2" Phillips Hex Head TEK Crimptite Screw Black Top Hinge Block Assembly Stainless Steel Top Hinge Block Assembly /4-20 x 7/8" Black Cap Head Setscrew /4-20 x 7/8" Stainless Steel Cap Head Setscrew Black Bottom Hinge Block Assembly Stainless Steel Bottom Hinge Assembly * Specify color when ordering. Telephone: (508) Fax: (508)

28 26 Plastic Door Front Panel Assembly For OPL and ALL Coin Models Mfd. prior to November 3, * 1 Right Hand Insulated Front Panel Assembly (Latch Type) Complete (includes illus. nos. 1 through 3 and 6) Stainless Steel Right Hand Insulated Front Panel Assembly (Latch Type) Complete (includes illus. nos. 1 through 3 and 5) /8" Pop Rivet Friction Door Latch #10-16 x 1/2" Hex Head TEK Crimptite Screw Rubber Grommet * Specify color when ordering. American Dryer Corporation 88 Currant Road / Fall River, MA

29 Basket (Tumbler)/Support Assemblies 27 1* Basket (Tumbler) ONLY (without Felt Collar) Non-Reversing Basket (Tumbler) and Support Assembly (includes illus. nos. 1 through 10) Reversing Basket (Tumbler) and Support Assembly (includes illus. nos. 1 through 10) #10-16 x 1/2" Hex Head TEK Crimptite Screw Basket (Tumbler) Rib ONLY /16-18 x 3/8" Socket Button Head Screw /8-16 x 31" Tie Rod /8" Flat Washer Non-Reversing Basket (Tumbler) Support ONLY Reversing Basket (Tumbler) Support ONLY /8-16 Hex Nut /8" Lock Washer /8" Flat Washer Felt Collar ONLY #847 Adhesive for Felt Collar (5.0 oz. tube) * Felt collar is not included and must be ordered separately. NOTE: For stainless steel basket (tumblers), contact factory. Telephone: (508) Fax: (508)

30 28 Basket (Tumbler) Bearing Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

31 Basket (Tumbler) Bearing Assembly /8" Flange Bearing /8" Lock Washer /8-16 Hex Nut /8-16 x 3/4" Hex Head Machine Bolt /8" Lock Washer /8-16 Hex Nut /8-16 x 1-1/2" Hex Head Machine Bolt * 3/8" Flat Washer /8" Lock Washer /8-16 Hex Nut /16-18 x 3/4" Hex Head Machine Bolt /16" Lock Washer /16" Flat Washer /16-18 x 1-1/2" Hex Head Machine Bolt /16-18 Hex Nut /8" Bearing Box Assembly Complete (includes illus. nos. 4 through 20) (for models mfd. without Rotational Sensor) /8" Bearing Box and Support ONLY (includes illus. nos. 4 through 6, 16 and 17) /8" Bearing Box ONLY Pillow Block Bearing Support ONLY /8" Pillow Block Bearing Assembly with Magnet (for models mfd. with Rotational Sensor) /8" Pillow Block Bearing /16-18 Hex Nut /16-18 x 1-1/2" Allen Setscrew " Pulley (for Non-Reversing Models Only) /4" Pulley (for Reversing Models Only) /8" Taper Lock Hub (for Reversing models Only) Shaft Key (for taper lock hub) /16-18 x 5/16" Allen Setscrew /4" x 1/4" x 7/8" Key L-680 V-Belt (basket [tumbler] to idler) (for Non-Reversing Models Only) L-680 V-Belt (basket [tumbler] to idler) (for Reversing Models Only) Rotational Sensor Assembly * As required. Telephone: (508) Fax: (508)

32 30 Idler Bearing Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

33 Idler Bearing Assembly L-670 V-Belt (idler to basket [tumbler]) (for Non-Reversing models Only) (for models mfd. as of November 21, 1997) L-680 V-Belt (idler to basket [tumbler]) (for Non-Reversing models Only) (for models mfd. between October 27, 1997 and November 21, 1997) L-690 V-Belt (idler to basket [tumbler]) (for Reversing models Only) (for models mfd. prior to October 27, 1997) " x 2-1/2" Compound Pulley L-500 V-Belt (idler to motor) 60 Hz ONLY (for Non-Reversing Models Only) L-510 V-Belt (idler to motor) 50 Hz ONLY (for Non-Reversing Models Only) L-650 V-Belt (idler to motor) 50/60 Hz (for Reversing Models Only) (for models mfd. as of October 27, 1997) L-620 V-Belt (idler to motor) 50/60 Hz (for Reversing Models Only) (for models mfd. prior to October 27, 1997) /16-18 x 5/16" Allen Setscrew /16" x 3/16" x 1-3/8" Key /8" x 3/4" Idler Shaft /4-20 x 2-1/4" Carriage Bolt /8" Flange Bearing / 4" Lock Washer / 4-20 Hex Nut Idler Bearing Assembly Complete (includes illus. nos. 5 through 17) /8-16 x 1" Hex Head Machine Bolt /8" Lock Washer /8" Flat Washer Idler Square Washer /16-18 Hex Nut /16-18 x 3" Hex Head Machine Bolt Telephone: (508) Fax: (508)

34 32 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

35 Non-Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly L-500 V-Belt (motor to idler assembly) 60 Hz ONLY L-510 V-Belt (motor to idler assembly) 50 Hz ONLY /16" x 3/16" x 1" Key /8" x 2" Motor Pulley (for 60 Hz motors Only) /8" x 2-1/4" Motor Pulley (for 50 Hz motors Only) /16-18 x 3/4" Hex Head Machine Bolt /16" Lock Washer /16" Flat Washer * 1 1 HP v / 1ø / 60 Hz T.E.F.C. Motor (plug type motor) /4 HP 240v / 1ø / 50 Hz T.E.F.C. Motor (plug type motor) Socket Terminal ONLY Pin/Socket Extraction Tool Pin Housing Connector /16-18 Hex Nut /16" Lock Washer /16" Flat Washer Neoprene Sponge Tape (sold by the foot) (for models mfd. as of August 6, 1998) Noise Suppressor Tape (sold by the foot) (for models mfd. prior to August 6, 1998) /16-18 Tinnerman Nut HP Motor Mount ONLY - 56Z Frame (includes illus. no. 13) * 1 1 HP v / 1ø / 60 Hz T.E.F.C. Motor Mount with Plug Motor (includes illus. nos. 2 through 7 and 13 through 20) /4 HP 240v / 1ø / 50 Hz T.E.F.C. Motor Mount Assembly Complete with Plug Motor (includes illus. nos. 2 through 7 and 13 through 20) * 1 1 HP 208/230/380/460v / 3ø / 60 Hz T.E.F.C. Motor Mount Assembly Complete (includes illus. nos. 3 through 6 and 13 through 22) * 1 1 HP 208/230/380/460v / 3ø / 50 Hz T.E.F.C. Motor Mount Assembly Complete (includes illus. nos. 3 through 6 and 13 through 22) /2" S.A.E. Flat Washer " Impellor with 3/4" Bore /8" x 1/8" x 1-1/2" Key /2" S.A.E. Flat Washer /2-20 Left Hand Jam Nut /8" x 90 Connector HP 208/230/380/460v / 3ø / 50/60 Hz T.E.F.C. Motor (56Z Frame) * Specify voltage when ordering. Telephone: (508) Fax: (508)

36 34 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

37 Reversing Totally Enclosed, Fan-Cooled (T.E.F.C.) Motor Mount Assembly L-650 V-Belt (motor to idler assembly) (for models mfd. as of October 27, 1997) L-620 V-Belt (motor to idler assembly) (for models mfd. prior to October 27, 1997) /16" x 3/16" x 1" Key /8" x 2" Motor Pulley (for 60 Hz motors Only) /8" x 2-1/4" Motor Pulley (for 50 Hz motors Only) /8" x 90 Connector 5* /2 HP 208/230/380/460v / 3ø / 50/60 Hz T.E.F.C. Motor (56Z Frame) /16-18 x 3/4" Hex Head Machine Bolt /16" Lock Washer /16" Flat Washer 9* HP 208/230/380/ 460v / 3ø / 50/60 Hz T.E.F.C. Motor (56Z Frame) /8" x 90 Connector /16-18 x 3/4" Hex Head Machine Bolt /16" Lock Washer /16" Flat Washer /16" Tinnerman /16"-18 Hex Nut /16" Lock Washer /16" Flat Washer Reversing Motor Mount - 56Z Frame (includes illus. no. 19) * 1 Reversing T.E.F.C. Motor Mount Assembly Complete - 60 Hz ONLY (includes illus. nos. 2 through 14 and 18 through 24) * 1 Reversing T.E.F.C. Motor Mount Assembly Complete - 50 Hz ONLY (includes illus. nos. 2 through 14 and 18 through 24) Neoprene Sponge Tape (sold by the foot) (for models mfd. as of August 6, 1998) Noise Suppressor Tape (sold by the foot) (for models mfd. prior to August 6, 1998) /2" S.A.E. Flat Washer /8" x 1/8" x 1-1/2" Key " Impellor with 3/4 Bore /2" S.A.E. Flat Washer /2-20 Left Hand Jam Nut * Specify voltage when ordering. Telephone: (508) Fax: (508)

38 36 Sensor Bracket Assemblies Microprocessor Sensor Bracket Assembly Non-Computer Sensor Bracket Assembly MAN /4" Temperature Sensor Probe Assembly (includes illus. nos. 1 and 5 through 8) Large Automatic Reset Thermostat #6 Star Washer #6-32 Hex Nut Insulated Terminal ONLY Socket Terminal ONLY Pin Socket Connector ONLY /4" Tinnerman Push On Fastener #6-32 x 1/ 4" Round Head Machine Screw Microprocessor Sensor Bracket Assembly Complete (includes illus. nos. 1 through 10) Universal Sensor Bracket ONLY Pin Connector ONLY Pin Terminal ONLY #8-18 x 7/16" Phillips Pan Head TEK Screw * #6-32 x 1/4" Round Head Machine Screw Large Thermostat (for models mfd. as of August 1, 1993) Large Thermostat (for models mfd. prior to August 1, 1993) American Dryer Corporation 88 Currant Road / Fall River, MA

39 Sensor Bracket Assemblies (continued) Large Thermostat (for models mfd. as of August 1, 1993) Large Automatic Thermostat (for models mfd. prior to August 1, 1993) Large Automatic Reset Thermostat (for ALL models mfd. as of August 1, 1993) Large Thermostat (for models mfd. prior to April 22, 1994) Large Thermostat (for models mfd. as of April 22, 1994) * #6 Star Washer * #6-32 Hex Nut Sensor Jumper (4) (for ALL models mfd. as of August 1, 1993) Sensor Jumper (3) ONLY (for models mfd. prior to August 1, 1993) ** Insulated Terminal ONLY *** Socket Terminal ONLY Pin Socket Connector ONLY (for ALL models mfd. as of August 1, 1993) Pin Socket Connector ONLY (for models mfd. prior to August 1, 1993) Sensor (4) Bracket Harness Assembly (includes illus. nos. 22 through 24) (for ALL models mfd. as of August 1, 1993) Non-Computer Sensor (3) Bracket Assembly Complete-includes Thermostats (includes illus. nos. 14 through 16 and 18 through 25) (for models mfd. prior to August 1, 1993) Non-Computer Sensor (4) Bracket Assembly Complete-includes Thermostats (includes illus. nos. 14 through 25) (for models mfd. from August 1, 1993 to April 22, 1994) Non-Computer Sensor (4) Bracket Assembly Complete-includes Thermostats (includes illus. nos. 14 through 25) (for models mfd. as of April 4, 1994) Universal Sensor Bracket ONLY Pin Connector ONLY (for models mfd. prior to August 1, 1993) Pin Connector ONLY (for ALL models mfd. as of August 1, 1993) *** Pin Terminal ONLY Pin/Socket Extraction Tool #8-18 x 7/16" Phillips Pan Head TEK Screw * Qty= 4 or 5 ** Qty= 5 or 8 *** Qty= 3 or 4 Telephone: (508) Fax: (508)

40 38 Direct Spark Ignition (DSI) Burner Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

41 Direct Spark Ignition (DSI) Burner Assembly DSI (Direct Spark Ignition) Burner Shield #10 x 1/2" Hex Washer TEK Screw #10-16 x 1/2" Hex Head TEK Crimptite Screw DSI Ignitor/Flame-Probe Assembly Ignitor/Flame-Probe Kit Assembly (includes illus. nos. 4 and 5) High Voltage (HV) Wire and Connector Assembly #8-32 x 3/4" Pan Head Machine Screw #8 Steel Burr #8-32 Pal Nut Large Tube Burner 10* #26 Natural Gas Burner Orifice - 60 Hz ONLY #29 Natural Gas Burner Orifice - 50 Hz ONLY #44 Liquid Propane (L.P.) Gas Burner Orifice - 60 Hz ONLY #46 L.P. Gas Burner Orifice - 50 Hz ONLY /2" DSI Manifold (3-Port) Pipe Bracket (bent) #10 x 1/2" Hex Washer TEK Screw /2" 24 VAC Redundant (natural gas) Gas Valve /2" 24 VAC Redundant (L.P. gas) Gas Valve /2" Valve L.P. Conversion Kit GV Pipe Bracket #10-16 x 1/2" Hex Head TEK Crimptite Screw /2" Union Shut Off with Tail Piece /2" x 29-1/8" Pipe #10 x 1" Hex Washer TEK Screw ADC DSI Module ONLY (50/60 Hz) Non-Heat Reclaimer Burner Box ONLY (for models mfd. as of November 17, 1997) Non-Heat Reclaimer Burner Box ONLY (for models mfd. prior to November 17, 1997) ** 1 SUPER AD-30 Natural Gas Burner Assembly Complete less Orifices ** 1 SUPER AD-30 L.P. Gas Burner Assembly Complete less Orifices ** 1 SUPER AD-30 L.P. Conversion Kit (for 60 Hz models) ** 1 SUPER AD-30 L.P. Conversion Kit (for 50 HZ models) * Contact factory for elevations over 2,000 feet. ** Burner orifices are not included and must be ordered separately. Telephone: (508) Fax: (508)

42 40 Electric Oven Assembly ELECTRIC OVEN (FRONT VIEW) ELECTRIC OVEN (REAR VIEW) American Dryer Corporation 88 Currant Road / Fall River, MA

43 Electric Oven Assembly * 1 Large Electric Oven Box ONLY * 1 Electric Oven Assembly Complete * - Electric Element #10 x 1/2" Hex Washer TEK Screw Sail Switch Box with Cover and Bracket ONLY Sail Switch Box Assembly Complete (includes illus. nos. 4 through 12) Twin Speed Nut #10-16 x 1/2" Hex Head TEK Crimptite Screw Sail Switch Box Cover ONLY Sail Switch #4 x 3/4" Pan Head "A" Machine Screw Sail Switch Actuator Rod Sail Switch Damper (flat) /8" Push On Fastener #10 x 1/2" Hex Washer TEK Screw Electric Oven Front Cover ONLY Large Relay Box Cover ONLY #10-24 x 5/8" Slotted Truss Head Machine Screw Hi-Limit #10 x 1/2" Hex Washer TEK Screw #10-24 Speed Nut L-70 Ground Lug /4-20 Free Spin Wash Nut * 1 Oven Relay * 1 Oven Relay Replacement Coil Internal Ceramic Insulator (2 per element) External Ceramic Insulator (2 per element) #10-32 Hex Nut (4 per element) * - Bus Bar (sold by the foot) * - Terminal Lug #10 Star Washer (2 per element) Large Electric Oven Right Side Cover ONLY #10-24 x 5 / 8" Slotted Truss Head Machine Screw * Refer to Electric Oven Component Application Chart on page 55. Telephone: (508) Fax: (508)

44 42 Single-Phase (1ø) Motor, Electric Relay Panel Assembly Pole Contactor - 24 VAC #10 x 1" Hex Head Screw RC Network with Connectors (for microprocessor [computer] controlled models Only) Back Electrical Box Cover...Not Illustrated #8-18 x 7/16" Phillips Pan Head TEK Screw...Not Illustrated American Dryer Corporation 88 Currant Road / Fall River, MA

45 3-Phase (3ø) Motor, Electric Relay Panel Assembly Back Electrical Box Component Plate Impellor Contactor - 24 VAC (208/230/240v - 50/60 Hz ) Impellor Contactor Replacement Coil - 24 VAC (208/230/240v - 50/60 Hz) #8-32 x 3/4" Phillips Round Head Machine Screw #8-32 Pal Nut /16-18 Lock Washer /16-18 Hex Nut Position Terminal Block #6-32 x 1-1/4" Slotted Round Head Machine Screw #6-32 Pal Nut Open/Close Bushing RC Filter (for microprocessor [computer] controlled models Only) #10 x 1/2" Hex Washer TEK Screw Transformer - 24 VAC (refer to Transformer Usage Listings on page 53 and page 54) Back Electrical Box Cover...Not Illustrated #8-18 x 7/16" Phillips Pan Head TEK Screw...Not Illustrated Telephone: (508) Fax: (508)

46 44 Microprocessor Reversing Rear Control Box Assembly Back Electrical Box Component Plate Arc Suppressor (A.S.) Board Nylon Standoff Reversing Contactor - 24 VAC (208/230/240v - 50/60 Hz) Reversing Contactor Replacement Coil - 24 VAC (208/230/240v - 50/60 Hz) #8-32 x 3/4" Phillips Round Head Machine Screw #8-32 Pal Nut /16-18 Lock Washer /16-18 Hex Nut Impellor Contactor - 24 VAC (208/230/240v - 50/60 Hz ) Impellor Contactor Replacement Coil - 24 VAC (208/230/240v - 50/60 Hz) #8-32 x 3/4" Phillips Round Head Machine Screw #8-32 Pal Nut Position Terminal Block #6-32 x 1-1/4" Slotted Round Head Machine Screw #6-32 Pal Nut Open/Close Bushing #10 x 1/2" Hex Washer TEK Screw Transformer - 24 VAC (refer to Transformer Usage Listings on page 53 and page 54) Back Electrical Box Cover...Not Illustrated #8-18 x 7/16" Phillips Pan Head TEK Screw...Not Illustrated American Dryer Corporation 88 Currant Road / Fall River, MA

47 Dual Timer Reversing Rear Control Box Assembly Back Electrical Box Component Plate Reversing Timer - 24 VAC (50/60 Hz) #8-18 x 7/16" Phillips Pan Head TEK Screw Reversing Contactor - 24 VAC (208/230/240v - 50/60 Hz) Reversing Contactor Replacement Coil - 24 VAC (208/230/240v - 50/60 Hz) #8-32 x 3/4" Phillips Round Head Machine Screw #8-32 Pal Nut /16-18 Lock Washer /16-18 Hex Nut Impellor Contactor - 24 VAC (208/230/240v - 50/60 Hz ) Impellor Contactor Replacement Coil - 24 VAC (208/230/240v - 50/60 Hz) #8-32 x 3/4" Phillips Round Head Machine Screw #8-32 Pal Nut Position Terminal Block #6-32 x 1-1/4" Slotted Round Head Machine Screw #6-32 Pal Nut Open/Close Bushing #10 x 1/2" Hex Washer TEK Screw Transformer - 24 VAC (refer to Transformer Usage Listing on page 53 and page 54) Back Electrical Box Cover...Not Illustrated #8-18 x 7/16" Phillips Pan Head TEK Screw...Not Illustrated Telephone: (508) Fax: (508)

48 46 Steam Coil/Air Operated Steam Damper Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

49 Steam Coil/Air Operated Steam Damper Assembly Steam Coil Assembly /16" Lock Washer /16-18 Hex Nut /4-20 Hex Nut /4" Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7, 10, and 11) /4" Lock Washer /4-20 Hex Nut Steam Damper Gasket (sold by the inch) /2" Long Steam Damper Foam Gasket /16-24 Stainless Steel Acorn Nut /16-24 Right Hand Jam Nut /16" x 3" Stroke Piston Left and Right Piston Support /4-20 Hex Nut /4" Lock Washer /4" Poly x 1 / 8" M.P.T. Connector /4" Poly-Flo Tubing (sold by the foot) /4" Poly x 1/ 8" M.P.T. Connector /8" Needle Valve /8" Brass Close Nipple Way Micro Valve - 24 VAC #6-32 x 1" Machine Bolt #6 Star Washer #6-32 Hex Nut Micro Valve Support /4-20 Hex Nut /4" Lock Washer /8" N.P.T. Silencer (muffler) Telephone: (508) Fax: (508)

50 48 Steam Coil/Mechanical Steam Damper Assembly American Dryer Corporation 88 Currant Road / Fall River, MA

51 Steam Coil/Mechanical Steam Damper Assembly Steam Coil Assembly /16" Lock Washer /16-18 Hex Nut /4-20 Hex Nut /4" Lock Washer Steam Damper Hinge Assembly Steam Damper Assembly (includes illus. nos. 7 through 10) Steam Damper Gasket (sold by the inch) /2" Long Steam Damper Foam Gasket Rod Bracket /2" x 3/32" Cotter Pin #10 Steel Burr Mechanical Steam Damper Actuator Rod #8-32 x 1/4" Phillips Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount #10 Steel Burr /2" x 3/32" Cotter Pin Mechanical Steam Damper Arm #8-32 x 1/4" Phillips Head Machine Screw #8 Star Washer Mechanical Steam Damper Motor Mount Mechanical Steam Damper Motor Mechanical Steam Damper Switch Plate Mechanical Steam Damper Switch #4-40 x 5/8" Phillips Pan Head Machine Screw Mechanical Steam Damper Switch #4-40 x 5/8" Phillips Pan Head Machine Screw #8 Star Washer #8-32 x 3/8" Pan Head Machine Screw * 1 Mechanical Steam Damper Motor Cam * The Mechanical Steam Damper Motor Cam is part of the Mechanical Steam Damper Motor. Telephone: (508) Fax: (508)

52 50 Sail Switch/Hi-Limit Assembly Twin Speed Nut #10-16 x 1/2" Hex Head TEK Crimptite Screw Sail Switch Box Cover and Bracket ONLY #4 x 3/4" Pan Head "A" Machine Screw Sail Switch ONLY Sail Switch Actuator Rod Sail Switch Damper (flat) /8" Push On Fastener Sail Switch Box with Cover and Bracket ONLY Sail Switch Assembly Complete (includes illus. nos. 1 through 8) /2" x 29-1/8" Pipe #10-16 x 1/2" Hex Head TEK Crimptite Screw Hi-Limit Mounting Bracket ONLY #6-32 Pal Nut #6-32 x 1/2" Round Head Machine Screw Hi-Limit ONLY /2" x 3/4" Reducing Coupling American Dryer Corporation 88 Currant Road / Fall River, MA

53 Outer Top/Back Guard Assembly Back Electrical Box Cover #8-18 x 7/16" Phillips Pan Head TEK Screw Top Back Guard (No Top Back Guard on Steam Models) #8-18 x 7/16" Phillips Pan Head TEK Screw #8-18 x 7/16" Phillips Pan Head TEK Screw Outer Top (No Outer Top on Steam Models) Bottom Back Guard #8-18 x 7/16" Phillips Pan Head TEK Screw Leveling Leg Telephone: (508) Fax: (508)

54 52 Coin Acceptor Listing NOTE: Coin Acceptors listed included Optical Switch (ADC Part No ). Single Coin* ADC Part No. Nation Description U.S. and Canada 25 Optic Coin Acceptor United Kingdom 10 New Pence Optic Coin Acceptor United Kingdom 20 New Pence Optic Coin Acceptor France 2 French Franc Optic Coin Acceptor France 5 French Franc Optic Coin Acceptor Australia 20 Australian Optic Coin Acceptor Australia $1 Australian Optic Coin Acceptor New Zealand 50 New Zealand Optic Coin Acceptor Japan 100 Yen Hanke Optic Coin Acceptor Token Optic Coin Acceptor Token Optic Coin Acceptor Muller Token Optic Coin Acceptor Singapore 50 Singapore Optic Coin Acceptor Hong Kong $1 Hong Kong Optic Coin Acceptor Dual Coin* U.S. and Canada 10 /25 Hanke Dual Optic Coin Acceptor Canada 25 /$1 Hanke Dual Optic Coin Acceptor United Kingdom 1 /20 Pence Hanke Dual Optic Coin Acceptor France 2/5 Franc Hanke Dual Optic Coin Acceptor Denmark 1/5 Danish Krone Dual Optic Coin Acceptor Netherlands 25 /1 Guilder Dual Optic Coin Acceptor * Consult factory for Coin Acceptors not listed. American Dryer Corporation 88 Currant Road / Fall River, MA

55 Step Down Transformer Usage Listing for Gas/Steam Dryers 53 HEAT VOLTAGE WIRE SERVICE STEP DOWN TRANSFORMER PART NO. CONTROL VOLTAGE PART NO or Gas Steam / / NOTE: Information not listed was not available at time of printing contact factory. Telephone: (508) Fax: (508)

56 54 Transformer Usage Listing for Electric Dryers KW VOLTAGE PHASE WIRE SERVICE STEP DOWN TRANSFORMER PART NO. CONTROL VOLTAGE PART NO ø 3 or ø ø 3 or ø 3 or /480 3ø 3 or ø 3 or ø ø 3 or ø 3 or /480 3ø 3 or ø 3 or ø ø 3 or ø 3 or /480 3ø 3 or ø 3 or ø ø 3 or ø 3 or /480 3ø 3 or ø 3 or ø ø 3 or ø 3 or ø NOTE: Information not listed was not available at time of printing contact factory. American Dryer Corporation 88 Currant Road / Fall River, MA