C5 controller Bacnet

Transcription

1 Date: September 02, 2013 Vendor Name: Amalva UAB Product Name: C5 Firmware Revision: BACnet Protocol Revision: 12 C5 controller Bacnet BACnet Protocol Implementation Conformance Statement Communication: UDP, port, 10Mbit Ethernet, RJ45 socket BACnet Standardized Device Profile (Annex L): BACnet Operator Workstation (B-OWS) BACnet Advanced Operator Workstation (B-AWS) BACnet Operator Display (B-OD) BACnet Building Controller (B-BC) BACnet Advanced Application Controller (B-AAC) BACnet Application Specific Controller (B-ASC) BACnet Smart Sensor (B-SS) BACnet Smart Actuator (B-SA) List all BACnet Interoperability Building Blocks Supported (Annex K): Data Sharing DS-RP-B Data Sharing-Read Property-B DS-RPM-B Data Sharing-Read Property Multiple-B DS-WP-B Data Sharing-Write Property-B Device Management DM-DDB-B Device Management-Dynamic Device Binding-B DM-DOB-B Device Management-Dynamic Object Binding-B Segmentation Capability: Able to transmit segmented messages Window Size Able to receive segmented messages Window Size Standard Object Types Supported: Analog Input Analog Output Status_Flags,Event_State,Out_Of_Service,Units,Description, Reliability, Status_Flags,Event_State,Out_Of_Service,Units,Priority_Array, Relinquish_Default, 1

2 Analog Value Binary Input Binary Output Binary Value Device Status_Flags,Event_State,Out_Of_Service,Units,Description, Priority_Array,Relinquish_Default,Max_Pres_Value, Min_Pres_Value,Resolution, Status_Flags,Event_State,Out_Of_Service,Polarity,Description Status_Flags,Event_State,Out_Of_Service,Polarity,Priority_Array, Relinquish_Default,Active_Text,Inactive_Text, Status_Flags,Event_State,Out_Of_Service,Priority_Array, Relinquish_Default, Object_Identifier,Object_Name,Object_Type,System_Status, Vendor_Name,Vendor_Identifier,Model_Name,Firmware_Revision, Application_Software_Version,Protocol_Version,Protocol_Revision, Protocol_Services_Supported,Protocol_Object_Types_Supported, Object_List,Max_APDU_Length_Accepted,Segmentation_Supported, APDU_Timeout,Number_Of_APDU_Retries,Device_Address_Binding, Database_Revision,Description,Location, Data Link Layer Options: BACnet IP, (Annex J) BACnet IP, (Annex J), Foreign Device ISO , Ethernet (Clause 7) ATA 878.1, 2.5 Mb. ARCNET (Clause 8) ATA 878.1, EIA-485 ARCNET (Clause 8), baud rate(s) MS/TP master (Clause 9), baud rate(s): MS/TP slave (Clause 9), baud rate(s): Point-To-Point, EIA 232 (Clause 10), baud rate(s): Point-To-Point, modem, (Clause 10), baud rate(s): LonTalk, (Clause 11), medium: BACnet/ZigBee (ANNEX O) Other: Device Address Binding: Is static device binding supported? (This is currently necessary for two-way communication with MS/TP slaves and certain other devices.) Yes No Networking Options: Router, Clause 6 - List all routing configurations, e.g., ARCNET-Ethernet, Ethernet-MS/TP, etc. Annex H, BACnet Tunneling Router over IP BACnet/IP Broadcast Management Device (BBMD) Does the BBMD support registrations by Foreign Devices? Yes No Does the BBMD support network address translation? Yes No Network Security Options: Non-secure Device - is capable of operating without BACnet Network Security 2

3 Secure Device - is capable of using BACnet Network Security (NS-SD BIBB) Multiple Application-Specific Keys: Supports encryption (NS-ED BIBB) Key Server (NS-KS BIBB) Character Sets Supported: Indicating support for multiple character sets does not imply that they can all be supported simultaneously. ISO (UTF-8) IBM /Microsoft DBCS ISO ISO (UCS-2) ISO (UCS-4) JIS X 0208 If this product is a communication gateway, describe the types of non-bacnet equipment/networks(s) that the gateway supports: Not applicable. Analog input Supply air temperature C R Extract air temperature C R Outdoor air temperature C R Exhaust air temperature C R Water temperature C R Air quality ppm R Air humidity %RH R Supply air flow m3/h R Exhaust air flow m3/h R Outdoor air filter pressure Pa R Extract air filter pressure Pa R Analog output Water heater level % R Water cooler level % R Humidifier level % R Heat exchanger level % R Recirculation level % R Supply fan level % R Exhaust fan level % R Outdoor air damper level % R Exhaust air damper level % R El. Heater level % R DX level % R Heat pump level % R 3

4 Digital input OVR R External stop R Digital output Water heating pump R Water cooling pump R Digital value Low supply air flow R Low extract air flow R VAV calibration fail R Change outdoor air filter R Change extract air filter R Electric heater off R High pressure on compressor R Low pressure on compressor R Service time R Service mode R Supply air temp. sensor failure R Extract air temp. sensor failure R Outdoor air temp. sensor failure R Exhaust air temp. sensor failure R Water temp. sensor failure R Return water temp low R Internal fire alarm R External fire alarm R External stop R Heat exchanger failure R Heat exchanger icing R Low supply air temperature R High supply air temperature R Electric heater overheat R Evaporator air temp. sensor failure R Evaporator coil temp. sensor failure R 4

5 Digital value Compressor failure R Supply fan mrive failure R Supply fan mrive overload R Supply fan motor failure R Supply fan motor overload R Exhaust drive failure R Exhaust fan drive oveload R Exhaust fan motor failure R Exhaust fan motor overload R Rotor ddrive failure R Rotor drive overload R Rotor motor failure R Rotor motor overload R Communication error R Controller failure R 5

6 Analog value Name Object Instance Range Unit Access Description Unit On/Off Off, 1-On Current mode R 0-Off/Standby, 1-Comfort1, 2-Comfort2, 3-Economy1, 4-Economy2, 5-Special Mode selection Comfort1 Supply flow * m3/h Comfort1 Extract flow * m3/h Comfort1 Setpoint C Comfort2 Supply flow * m3/h Comfort2 Extract flow * m3/h Comfort2 Setpoint C Economy1 Supply flow * m3/h Economy1 Extract flow * m3/h Economy1 Setpoint C Economy2 Supply flow * m3/h Economy2 Extract flow * m3/h Economy2 Setpoint C Special Supply flow * m3/h Special Extract flow * m3/h Special Setpoint C Special mode Heating Special mode Cooling Special mode Recirculation Special mode Humidifying Comfort1, 2-Comfort2, 3-Economy1, 4-Economy2, 5-Special, 6-Program 6

7 Analog value Name Object Instance Range Unit Access Description Special mode Dehumidifying Flow control mode CAV, 1-VAV Temp. control mode Supply, 1-Extract, 2-Room AQC Enable AQC Setpoint ppm AQC Mode AQC Setpoint ppm 1-Comfort1, 2-Comfort2, 3-Economy1, 4-Economy2, 5-Special AQC Mode 2 1-Comfort1, 2-Comfort2, 3-Economy1, Economy2, 5-Special OCV Enable OCV Winter compensation stop C OCV Winter compensation start C OCV Summer compensation start C OCV Summer compensation stop C MTC Enable MTC Setpoint C OVR Enable OVR Type Alltime, 1-If on, 2-If off OVR Mode 0-Standby, 1-Comfort1, 2-Comfort2, Economy1, 4-Economy2, 5-Special, 6-Program 7

8 Analog value Name Object Instance Range Unit Access Description SNC Enable SNC Start temperature C OOD Enable OOD Setpoint ppm REC Enable REC Setpoint ppm REC Min. fresh air % REC Winter end C REC Winter start C REC Summer start C REC Summer end C REC Default recirculation % REC Activated recirculation % Actual alarms reset 53 1 W Air heater operation ^32 hours Supply fan operation ^32 hours Exhaust fan operation ^32 hours Heat exchanger thermal R efficiency % 255-none Heat exchanger recovery ^32 watt R Thermal energy saving % R Supply SFP R Exhaust SFP R 8

9 Analog value Name Object Instance Range Unit Access Description Day days Month months Year years Hours hours Minutes minutes Flow units