Document Introduction Annex A - Protocol Implementation Conformance Statement (Normative) Product Description... 4

Transcription

1 NS Series Temperature and Humidity Network Zone and Discharge Air Sensors and NS Series Network Sensors with Fault Code Capability Protocol Implementation Conformance Statement Technical Bulletin Code No. LIT Issued November 6, 2015 NS-AHx7x0x-x, NS-APx7x0x-0, NS-ATx700x-x, NS-BCN7004-x, NS-BHx7x0x-0, NS-BPx700x-0, NS-BTx700x-x, NS-DTN70x3-x, NS-FTN7003-x, NS-MHx700x-x, NS-MNN700x-x, NS-MTx700x-x, NS-ATB7F03-x, NS-BTB7F03-x, NS-ATA700x-0A Refer to the QuickLIT website for the most up-to-date version of this document. Document Introduction Annex A - Protocol Implementation Conformance Statement (Normative) Product Description BACnet Standardized Device Profile (Annex L) Segmentation Capability Standard Object Types Analog Input Analog Value Binary Value Device File Multistate Value Data Link Layer Option Device Address Binding Networking Options Character Sets Annex K - BACnet Interoperability Building Blocks (BIBBs) (Normative) NS Series Temperature and Humidity Network Zone and Discharge Air Sensors and NS Series Network Sensors with Fault Code Capability Protocol Implementation Conformance Statement Technical Bulletin 1

2 2

3 NS Series Temperature and Humidity Network Zone and Discharge Air Sensors and NS Series Network Sensors with Fault Code Capability Protocol Implementation Conformance Statement Technical Bulletin Document Introduction This document contains the Protocol Implementation Conformance Statement (PICS) and BACnet Interoperability Building Blocks (BIBBs) for the NS Series Temperature and Humidity Network Zone and Discharge Air Sensors and NS Series Network Sensors with Fault Code Capability, as required by the American National Standards Institute/American Society of Heating, Refrigerating, and Air-Conditioning Engineers (ANSI/ASHRAE) Standard , BACnet protocol. The PICS is a written document created by the manufacturer of a device to identify the particular options specified in the BACnet standard and implemented in the device. BACnet interoperability building blocks are collections of one or more BACnet services. This document includes a listing of the BIBBs currently supported by the network zone or discharge air sensor. 3

4 Annex A - Protocol Implementation Conformance Statement (Normative) Table 1: BACnet Protocol Implementation Conformance Statement Vendor Name Johnson Controls, Inc. Product Name NS Series Temperature and Humidity Network Zone and Discharge Air Sensors NS Series Network Sensors with Fault Code Capability Product Model Numbers NS-AHA700x-x, NS-AHB700x-0, NS-AHN700x-x, NS-AHP7001-0, NS-AHR710x-0, NS-APA700x-0, NS-APB700x-0, NS-APR710x-0, NS-ATA700x-x, NS-ATB700x-0, NS-ATC700x-x, NS-ATD700x-0, NS-ATF700x-0, NS-ATN700x-x, NS-ATP700x-x, NS-ATV700x-0, NS-BHB700x-0, NS-BHN7001-x, NS-BHP7001-0, NS-BHR710x-0, NS-BPB700x-0, NS-BTB700x-x, NS-BTF700x-0, NS-BTN700x-x, NS-BTP700x-x, NS-BTV700x-0, NS-DTN70x3-x, NS-FTN7003-x, NS-MHB7004-2, NS-MHN7004-2, NS-MHL700x-0, NS-MNN700x-x, NS-MTB700x-x, NS-MTL700x-0, NS-MTN NS-ATB7F03-x, NS-BTB7F03-x Applications Software Version Not Applicable Firmware Versions 2.2 through 6.0 BACnet Protocol Revision Version 1, Revision 4 Product Description The NS Series Temperature and Humidity Network Zone, Discharge Air Sensors, or Fault Code Capability Sensors are components of the Metasys system. In terms of the BACnet protocol, the network zone or discharge air sensor is an end device. BACnet Standardized Device Profile (Annex L) BACnet Operator Workstation (B-OWS) BACnet Building Controller (B-BC) BACnet Advanced Application Controller (B-AAC) BACnet Application Specific Controller (B-ASC) BACnet Smart Sensor (B-SS) BACnet Smart Actuator (B-SA) Note: For a complete listing of the additional BIBBs supported (Annex K), see the Annex K - BACnet Interoperability Building Blocks (BIBBs) (Normative) section of this document. Segmentation Capability Segmentation Requests Window Size 127 Segmentation Responses Window Size 127 4

5 Standard Object Types The following is a list of the standard object types as defined by ASHRAE. See the section of the supported object type for details. Analog Input Analog Output Analog Value Averaging Binary Input Binary Output Binary Value Calendar Command Device Event Enrollment File Group Life Safety Point Life Safety Zone Loop Multistate Input Multistate Output Multistate Value Notification Class Program Schedule Trend Log 5

6 Analog Input Table 2: Analog Input Dynamically Dynamically Creatable Deletable Reliability Offset Units 1 Offset 2 1. Zone or Discharge Air Temperature Only (Object Instance 0): Options: Degrees C (62) or Degrees F (64). 2. Offset is a writable proprietary Property. Analog Value Table 3: Analog Value Dynamically Dynamically Creatable Deletable Max Present Value 1 Min Present Value 1 Reliability 2 Out of Service 3 Present Value 4 1. Applies to the Zone Temperature Setpoint only (Object Instance 0). The Min Present Value and Max Present Value are proprietary properties that force the Present Value of this object to lie within the range. 2. Reliability is supported for only Zone Temperature Setpoint (Object Instance 0). 3. Out of Service is writable for the Zone Temperature Display (Object Instance 1). 4. Writable Present Value is supported for only the Zone Temperature Display (Object Instance 1). Range Restriction: 0.0 to Binary Value Table 4: Binary Value Dynamically Dynamically Creatable Deletable Reliability Device Table 5: Device Dynamically Creatable Dynamically Deletable Object Identifier Object Name 1 1. Range Restriction: 1 to 13 bytes. The first byte defines the character set; the remaining 12 bytes constitute the Object Name. File Table 6: File Dynamically Creatable Dynamically Deletable Archive 6

7 Multistate Value Table 7: Multistate Value Dynamically Dynamically Creatable Deletable Reliability 1 Out of Service 2 Present Value 3 1. Reliability is supported for only Fan Speed Override (Object Instance 1). 2. Out of Service is writable for Occupancy Status (Object Instance 0), Fan Speed Status (Object Instance 2), and Efficiency Display Status (Object Instance 3). 3. Present Value is writable for Occupancy Status (Object Instance 0 with a Range Restriction of 1 to 4), Fan Speed Status (Object Instance 2 with a Range Restriction of 1 to 9), and Efficiency Display Status (Object Instance 3 with a Range Restriction of 1). Fan Speed Override (Object Instance 1) is not writable. Data Link Layer Option BACnet Internet Protocol (IP) (Annex J) BACnet IP (Annex J), Foreign Device ISO , Ethernet (Clause 7) ANSI/ATA 878.1, 2.5 MB ARCNET network (Clause 8) ANSI/ATA 878.1, RS-485 ARCNET network (Clause 8), baud rates: Master-Slave/Token-Passing (MS/TP) master (Clause 9), baud rates: MS/TP slave (Clause 9), baud rates: 9600,19,200, 38,400, 76,800 Point-To-Point, EIA 232 (Clause 10), baud rates: Point-To-Point, modem (Clause 10), baud rates: LonTalk protocol (Clause 11), medium: Other: Device Address Binding Yes No Is static device binding supported? (required for two-way communication between MS/TP slaves and other devices) Networking Options Router, Clause 6: Annex H, BACnet Tunneling Router over IP BACnet/IP Broadcast Management Device (BBMD) Does the BBMD support registrations by Foreign Devices? Yes No 7

8 Character Sets Indicating support for multiple character sets does not imply that they can all be supported simultaneously. ANSI X3.4 ISO Universal Character Set-2 (UCS-2) IBM /Microsoft Double-Byte Character Set (DBCS) ISO (UCS-4) ISO Japanese Industrial Standard (JIS) C 6226 If this product is a communication gateway, describe the types of non BACnet equipment/network(s) that the gateway supports: Annex K - BACnet Interoperability Building Blocks (BIBBs) (Normative) Table 8 lists all the BIBBs which, per ANSI/ASHRAE Standard , could be supported by a BACnet Smart Sensor (B-SS). The checked BIBBs are supported by the NS Series Temperature and Humidity Network Zone or Discharge Air Sensor. Table 8: BACnet Smart Sensor BIBBs Support (Part 1 of 2) Application Service (B-SS) Designation Data Sharing - Read Property - A DS-RP-A Data Sharing - Read Property - B Data Sharing - Read Property Multiple - A Data Sharing - Read Property Multiple - B Data Sharing - Write Property - A Data Sharing - Write Property - B Data Sharing - Write Property Multiple - B Data Sharing - COV - Unsolicited - A Data Sharing - COV - Unsolicited - B Alarm and Event - Notification Internal - B Alarm and Event - ACK - B Alarm and Event - Information - B Alarm and Event - Enrollment Summary - B Scheduling - External - B Trending - Viewing and Modifying Trends Internal - B Trending - Automated Trend Retrieval - B Device Management - Dynamic Device Binding - A Device Management - Dynamic Device Binding - B Device Management - Dynamic Object Binding - A DS-RP-B DS-RPM-A DS-RPM-B DS-WP-A DS-WP-B DS-WPM-B DS-COVU-A DS-COVU-B AE-N-I-B AE-ACK-B AE-INFO-B AE-ESUM-B SCHED-E-B T-VMT-I-B T-ATR-B DM-DDB-A DM-DDB-B DM-DOB-A 8

9 Table 8: BACnet Smart Sensor BIBBs Support (Part 2 of 2) Application Service (B-SS) Designation Device Management - Dynamic Object Binding - B DM-DOB-B Device Management - Device Communication Control - B Device Management - Time Synchronization - B Device Management - UTC Time Synchronization - B Device Management - Reinitialize Device - B Device Management - Backup and Restore - B Network Management - Connection Establishment - A DM-DCC-B DM-TS-B DM-UTC-B DM-RD-B DM-BR-B NM-CE-A Table 9 lists all the BACnet standard application services. The checked services are supported by the NS Series Temperature and Humidity Network Zone or Discharge Air Sensor. Table 9: BACnet Standard Application Services Support (Part 1 of 2) Application Service Initiates Requests Executes Requests AcknowledgeAlarm AddListElement AtomicReadFile AtomicWriteFile ConfirmedCOVNotification ConfirmedEventNotification ConfirmedPrivateTransfer ConfirmedTextMessage CreateObject DeleteObject DeviceCommunicationControl Disconnect-Connection-To-Network Establish-Connection-To-Network GetAlarmSummary GetEnrollmentSummary GetEventInformation I-Am I-Am-Router-To-Network I-Could-Be-Router-To-Network I-Have Initialize-Routing-Table Initialize-Routing-Table-Ack LifeSafetyOperation ReadProperty 9

10 Table 9: BACnet Standard Application Services Support (Part 2 of 2) Application Service Initiates Requests Executes Requests ReadPropertyConditional ReadPropertyMultiple ReadRange ReinitializeDevice RemoveListElement SubscribeCOV SubscribeCOVProperty TimeSynchronization UnconfirmedCOVNotification UnconfirmedEventNotification UnconfirmedPrivateTransfer UnconfirmedTextMessage UTCTimeSynchronization VT-Close VT-Data VT-Open Who-Has Who-Is Who-Is-Router-To-Network WriteProperty WritePropertyMultiple Building Efficiency 507 E. Michigan Street, Milwaukee, WI Metasys and Johnson Controls are registered trademarks of Johnson Controls, Inc. All other marks herein are the marks of their respective owners Johnson Controls, Inc. Published in U.S.A. 10