Emergency call system for lifts: SafeLine SLMX2 Quick-guide

Transcription

1 Emergency call system for lifts: SafeLine SLMX2 Quick-guide

2 Introduction SAFELINE SL Introduction General notes The SAFELINE SL system has been designed and manufactured in accordance with the best available techniques and trusted safety technology specifi cations. These mounting instructions must be observed by all persons mounting, maintaining or confi guring the SAFELINE SL. These mounting instructions must be available to the qualifi ed service engineer or maintenance staff at all times. A thorough knowledge of the essential and specifi c safety instructions applying to materials handling technology in general and to lift technology in particular is a prerequisite for a correct and safe handling and a reliable trouble-free functioning of the system. The SAFELINE SL must be exclusively used for the intended purpose. Any modifi cation of or extension to the SAFELINE SL or the individual components of the SAFELINE SL by the system owner are not authorised. Liability exclusion The manufacturer is not liable with regard to the buyer of the product or third parties for damages, losses, expenses or expenditures incurred by the buyer or third parties as a result of accidents, abuse of the product, false mounting or unauthorized alterations, repairs or extensions. In every one of these cases, any guarantee claim will be excluded. The technical data are completely up-to-date. Typographical errors, errors and technical modifi cations reserved. The manufacturer K. A. Schmersal GmbH Industrial safety switching appliances Möddinghofe 30 D Wuppertal Phone (0) Fax (0) info@schmersal.com Internet 2

3 Introduction For your personal safety These mounting instructions include important safety instructions as well as the necessary information for a proper fi tting of the SAFELINE SLMX2. Please read these mounting instructions attentively. The applicable prescriptions of the Professional Federation, the Association of Electricians and Electrical Engineers, the EC Directives and the General Regulations on Industrial Safety must be observed. The service engineer must know the essential requirements regarding Safety at Work and Accident Prevention; he furthermore must be trained in the functioning and operation of lifts and transport installations. The service engineer must be an electric specialist and technician in accordance with EN Before starting the mounting of the SAFELINE SLMX2, the lift must be protected against unauthorized switching-on by third parties. Install on every fl oor a sign labelled: Caution! Lift out of order. Maintenance works! Risk of falling! Close the landing doors of the lift cage during mounting. Delimitate hazardous areas. Only use fi tting and maintenance tools and equipment in perfect condition. 3

4 Wiring diagram Connections Orange/White Voltage supply 0 Volt Orange Green/White + IN CASE OF ALARM Voltage supply Volt Additional input (fi lter) Blue + IN CASE OF ALARM Alarm button Blue/White Green Telephone line out to next SL Brown/White Brown Telephone line in Series-wiring of max. 9 SLMX2/SL3000 units Four wires required Telephone TELELINJE line inin Braun Brown Braun Brown / / Weiß White Blau / Weiß Blue / White Grün Green Braun Brown Braun Brown / / Weiß White Blau / Weiß Blue / White Grün Braun Braun / Weiß Green Brown Brown / White Parallel-wiring of max. 3 SLMX2/SL3000 units Two wires required Telephone TELELINJE line IN in Brown Braun Braun Brown / Weiß / White Brown Braun Braun Brown / Weiß / White Brown Braun Braun Brown / Weiß / White 4

5 Programming codes Programming code Access code, then you can start programming Function Code Note Set alarm code for P100 ID code * 0 1 * For the P100 ID code, you always must enter 8 digits; fi nish with # CPC ID code * 0 2 * For the CPC ID code, you always must enter 6-8 digits; fi nish with # Q23 ID code * 0 3 * For the Q23 ID code, you always must enter 12 digits; fi nish with # Enter telephone number: 1 st telephone number * 1 1 * For the telephone number, you can enter 1-16 digits; fi nish with # 2 nd telephone number * 1 2 * For the telephone number, you can enter 1-16 digits; fi nish with # 3 rd telephone number * 1 3 * For the telephone number, you can enter 1-16 digits; fi nish with # 4 th telephone number * 1 4 * For the telephone number, you can enter 1-16 digits; fi nish with # Call type: Call type 1 st telephone number * 2 1 * Enter the code (0-3) and fi nish with # 0 = P100 1 = Voice 2 = Q23 3 = CPC Call type 2 nd telephone number * 2 2 * Enter the code (0-3) and fi nish with # 0 = P100 1 = Voice 2 = Q23 3 = CPC Call type 3 rd telephone number * 2 3 * Enter the code (0-3) and fi nish with # 0 = P100 1 = Voice 2 = Q23 3 = CPC Call type 4 th telephone number * 2 4 * Enter the code (0-3) and fi nish with # 0 = P100 1 = Voice 2 = Q23 3 = CPC Call type LMS * 3 0 * Enter the code (0 of 3) and fi nish with # 0 = P100 3 = CPC Call type self test * 3 1 * 0 # P100 is used for test alarms. Self test alarm: LMS telephone number * 1 6 * Enter the LMS telephone number of the alarm receiver/slcc, fi nish with # Self test alarm * 1 7 * Enter the telephone number of the test alarm receiver, fi nish with # Test interval * 2 7 * Enter the interval for the test alarm in days (0-99) in, fi nish with # Alarm type (only when the call type is CPC): 1 st telephone number * 4 1 * Enter the alarm type, fi nish with #. Default setting = 10 2 nd telephone number * 4 2 * Enter the alarm type, fi nish with #. Default setting = 10 3 rd telephone number * 4 3 * Enter the alarm type, fi nish with #. Default setting = 10 4 th telephone number * 4 4 * Enter the alarm type, fi nish with #. Default setting = 10 LMS number * 4 5 * Enter the alarm type, fi nish with #. Default setting = 17 Number self test alarm * 4 6 * Enter the alarm type, fi nish with #. Default setting = 26 Recording voice messages: Record an emergency call * 5 1 * «Message» # This message is played in the lift car. Record an emergency call/alarm message from the lift car Options for the recorded voice messages: * 5 2 * «Message» # This message is played to the operator answering the emergency call. Options for the emergency call * 6 1 * Enter the number of the desired option and fi nish with # 0 = deactivate the recorded voice message 1 = activate the recorded voice message # = play the recorded voice message Options for the emergency call/alarm message from the lift car * 6 2 * Enter the number of the desired option and fi nish with # 0 = deactivate the recorded voice message 1 = activate the recorded voice message # = play the recorded voice message Quit programming mode 5

6 Programming codes Programming code Access code, then you can start programming Function Code Note Other codes: Time-out redial rings * 7 2 * Choose 02-50, fi nish with #. Default setting = 08 Function additional input * 7 3 * Choose 0-2, fi nish with # 0 = none 1 = fi lter input 2 = LMS input Additional input type * 7 4 * Choose 0-1, fi nish with # 0 = normally-open contact (NO) 1 = normally-closed contact (NC) Hotline * 7 5 * Choose 0-1, fi nish with # 0 = default telephone (default setting) 1 = hotline Compatibility mode * 7 7 * Choose 0-1, fi nish with # 0 = off 1 = Kone Display mode * 7 8 * Choose 0-1, fi nish with # 0 = default 1 = completely to EN81-28 Reset active alarm * 8 0 * Choose 0-1, fi nish with # 0 = off (default setting) 1 = on Automatic answer * 8 1 * Choose 0-16, fi nish with # 00 = do not answer 02 = default setting Unit number * 8 2 * Choose 0-9, fi nish with #. 0 = default setting Detect dial tone * 8 3 * Choose 0-1, fi nish with # 0 = off 1 = on Return signal to SLCC * 8 4 * Choose 0-2, fi nish with # 0 = do not send return signal (default setting) 1 = send return signal 2 = send start and end message Cancel in case of new alarm * 8 6 * Choose 0-1, fi nish with # 0 = off 1 = on (default setting) Alarm button delay * 8 7 * Choose 0-60, fi nish with #. Default setting = 5 Relay output type * 8 8 * Choose 0-5, fi nish with # 0 = default 1 = EN = DTMF-controlled Alarm button type * 8 9 * Choose 0-1, fi nish with # 0 = normally-open contact (NO) 1 = normally-closed contact (NC) Change password * 9 1 * Enter four digits, fi nish with #. Default setting = 0000 Simulate alarm * 9 4 * Choose 1-5, fi nish with # Quit programming mode and send an emergency call Note! The LMS telephone number *16* must be programmed! 1 = emergency call 2 = test alarm 3 = alarm battery failure 4 = alarm microphone/loudspeaker failure 5 = return signal in case of voice communication Quit programming * 0 0 * # Quit programming mode Restore factory settings * 9 9 * 1 # Reactivate the factory settings of the unit 6 Quit programming mode

7 LED s Yellow LED: Flashes once every 5 seconds - Telephone line not OK (!) Off - Telephone line OK, call terminated Flashes twice every second - Alarm button active. Permanently on - Alarm activated. Green LED: Flashes once every 5 seconds - Unit OK (!) Flashes twice every second - Alarm fi lter/fi lter input activated (!) Flashes rapidly - Confi guration mode. Permanently on - Call forwarded. Off - Telephone line not OK (!) System LED: Flashes once every 5 seconds - Telephone line OK. Flashes twice every 5 seconds - no telephone connection available Flashes every 0.5 seconds - Call forward in progress. Permanently on - Call forwarded. Flashes rapidly - incoming call System LED Note! The functions marked with (!) are disabled, when the function Display mode is set to Entirely to EN

8 K.A. Schmersal GmbH Industrielle Sicherheitsschaltsysteme Möddinghofe 30 D Wuppertal Postfach D Wuppertal Telefon (0) Telefax (0) info@schmersal.com Internet / HE / / English