SYSTEM 16. Design Application Specifications Operation

Transcription

1 SYSTEM 16 Design Application Specifications Operation 1

2 DESIGN APPLICATION 2

3 SYSTEM 16 Additional storrage with low plinth Fixed system with low plinth. Underbench cabinets with extra height. Top cabinets is available in two heights. Service bridge with free positioning of gas, water and air ventilation taps and fittings. System 16 is a fixed laboratory furniture system available with a range of different worktop materials, doors, hinges and handles., låger, hængsler og greb. Island systems are also available with dual-access top cabinets. The service bridge can be fitted with electrical sockets and fittings, which can be freely positioned along the entire length of the service bridge. pipings are mounted in the service bridge, or behind the cabinets in the lead zone. If the lead zone is used, then there is easy access behind the cover plate, or in the gable. both places can be accessed without the use of tools. 3

4 POINT EXHAUST TOP CABINETS WEIGHING COLUMN SPLASHBACK UNDERBENCH CABINET AND DRAWERS 4

5 SERVICE CHASE INSTALLATIONS WORKTOPS SINK UNIT 5

6 Cabinets and drawers SUSPENDED UNDERBENCH CABINETS Suspended underbench cabinets available with laminate-coated fronts in the following variants: Door Door and drawers Drawers x 2+1 Drawers x 3+1 Drawers x 5 DRAWER SLIDES Soft-close slides with % pull-out. PLINTHS Plinths are mm in height and made from 18 mm waterproof plywood coated with dark grey laminate in colour F2297 Terril. Plinths are supplied as standard with adjustable feet. Plinths can also be supplied without adjustable feet, if desired. 6

7 Top cabinets Top cabinets are available with laminate-coated doors or doors with glass panes with either a laminate or aluminium frame. Pre-laminated edge band Mounting fitting for top cabinets Wall cabinet with laminate -coated door Post-laminated edge Dual-access cabinet and glass door with aluminium frame Dual-access cabinet with glass door and laminate frame with post-laminated edge Wall cabinet with glass door and aluminium frame Wall cabinet with glass door and laminated frame with post-laminated edge Cabinet accessories HANDLES Drawer and cabinet door handles are as standard, made from aluminium with a width of 160 mm from centre to centre. STANDARD Handle, aluminium (CTC: 160 mm) D-handle, acid-proof stainless steel (CTC: 160 mm) HINGES The self-closing, galvanized hinge is externally visible. Opening angle of 270 degrees. 7

8 Worktops MATERIALS Laminate Compact laminate Polypropylene (PP) Stainless steel, 316 Epoxy resin Ceramic WORKTOPS RESISTANCE OVERVIEW Organic solvent Acid /Alka Heat Indentation Impact Discolouration Surface unevenness Absorption Laminate Compact laminate Polypropylene (PP) Stainless steel, 316 Epoxy resin Ceramic Excellent Good Acceptable COLOURS Laminate STANDARD OPTION White Alpino M138B Steel Grey M104B Grey Silver M142B Thistle F7880VEL China Blue F7884VEL Dusty Jade F7879VEL Azur F1019Mat Oceano K1997UN Blu Violetto A0673ERRE Compact laminate STANDARD STANDARD White with black core FM0085FH Grey with black core FM0074FH Solid black FM0082FH Solid white Available only in 12 mm FM0085 8

9 Profiles, worktops Profiles, sink unit worktops LAMINATE POLYPROPYLENE PP Straight front and rear edge. Straight edges with pre-laminated ABS plastic edge band. All edges have raised edges. STAINLESS STEEL, 316 Post-formed front edge and straight rear edge. Post-formed front edge and grooved rear edge. All edges have raised edges. EPOXY Post-formed front and rear edge. NB! The worktop must be assembled in the centre using the special fitting. All edges have raised edges. COMPACT LAMINATE CERAMIC Bevelled edges. All edges have raised edges. STAINLESS STEEL, 316 OPTIONS Straight front and rear edge. Sink unit worktops are also available with laminate or as compact laminate. However, these worktops do not have raised edges. STANDARD Material 1 Thickness Depth (mm) Length 2 (mm) Max Depth OPTION Max Length Laminate 30 mm / / 700 / / 850 mm / / 1200 / 1500 / 1800 / mm 1297 mm 2597 mm Compact laminate 16 mm / / 850 mm 1297 mm 2797 mm Stainless steel /35 mm / / 850 mm 3850 mm 1370 mm Polypropylene (PP) 20/30 mm / / 850 mm mm 4000 mm Epoxy 15/25 mm / / 850 mm 1500 mm 2 mm Ceramic 28/35 mm / / 850 mm mm 1800 mm 1) Sink unit worktops are available with a depth of and in the following lengths:,, 1200, 1500 and 1800 mm. 2) Worktops for island setups (D: 1500 / 1 /1700 mm) assembled in the centre using the special fitting. 9

10 Sink unit The table below shows the combinations available when choosing the worktop type and sink. SINK UNITS Worktop material Glued sink Inserted sink All-welded sink Sink, material Laminate Compact laminate Stainless steel, 316 Polypropylene (PP) Epoxy Ceramic STANDARD STD STD STANDARD Stainless steel (304) / Polypropylene ) Stainless steel (304) / Polypropylene ) Stainless steel (304/316) Polypropylene (PP) Epoxy Ceramic SINK SPECIFICATIONS Material Stainless steel, 304 Standard dimensions 480x340x145 mm Optional dimensions 400x340x145 mm Bottom valve Bottom strainer Water trap Overflow Standpipe Connection OPTION 1 ½ CONNECTOR Stainless steel, 304 (all-welded) 480x340x160 mm 500x400x160 mm 400x340x150 mm OPTION 1 ½ CONNECTOR Stainless steel, 316 (all-welded) 480x340x180 mm 500x400x200 mm 400x340x150 mm OPTION 1 ½ CONNECTOR Polypropylene (PP) 500x400x200 mm OPTION OPTION 1 ½ CONNECTOR Epoxy x365x200 mm 406x305x203 mm 635x381x254 mm OPTION OPTION OPTION OPTION 1 ½ CONNECTOR Ceramic 380x380x250 mm 530x380x250 mm OPTION 1 ½ CONNECTOR If you require more information, please contact Labflex. 10

11 Service chase The Labflex service chase is available either as wall-mounted or for island setups. The hatch at the bottom of the service chase provides access for the laying and servicing of installations. Cable and pipe laying from ceiling to floor Cable and pipe laying from ceiling to unit Cable and pipe laying from ceiling to service bridge mm mm Continuous service chase Service chase cut at ceiling edge 11

12 Installations LIGHTNING LED printed circuit board for installation in the service bridge below the top cabinets K SERVICE BRIDGE SUSPENSION Example of wall-mounted service bridge suspension Brightness: Minimum 1800 lm/m (brightness ~ 1 lm, equivalent to a W bulb) Minimum RA90 Adjustable brightness, -10%. Plug-and-Play solution: Only need to connect power. No need for external driver or damper. Wall-mounted service bridge without LED. Wall-mounted service bridge with built-in LED. Standalone island setup and service bridge without LED. Standalone island setup and service bridge with built-in LED. Wall-mounted electrical duct without LED. Wall-mounted electric duct with builtin LED. 12

13 Installations ELECTRICITY Electrical sockets are as standard, positioned flush with the service bridge. STANDARD OPTION Single Double Single, SCHUKO Double, SCHUKO Triple Triple, SCHUKO CEE 230V CEE 400 V Empty back-box, OBO for fitting in duct Frame for data/pds 13

14 Weighing column The weighing column ensures optimal stability in order that precision measuring work can be executed in the laboratory. The weighing column is designed for precise measurements down to four decimal places, and its measuring is independent of the adjoining structure. The weighing column s design includes vibration damping, and it can either be freely positioned or set in a worktop with a section cut out for the weighing column/weighing stone. The weighing column s base plate is made from compact laminate and it is secured to the concrete floor using an expansion bolt. The weighing stone is made from granite. The maximum load on the table is kg and 17 kg on the road stone. Point exhaust The extraction arm is removable and designed as a self-bearing and flexible structure, which is easy to operate and clean. The arm can be adjusted with one hand, so that it extracts smoke, dust or gas as close as possible to the source of contamination. The extraction arm is supplied as a front-mounted, wall-mounted or ceiling-mounted arm. The standard extraction arm does not have a damper (available as an option with manual damper). Extraction arm: Ø125 mm and L = mm. Extraction cup: Ø280 / Ø385 mm (polycarbonate). Rotatable 360 degrees (only when ceiling-mounted). Splashback The splashback is made from 6 mm hardened glass and fitted on the sink unit to prevent splashes from the sink and taps. ACCESSORIES 14

15 Taps Certified in accordance with ISO 1 and Danish Gas Technology Centre (DG) approved. Colour codes on the handle are as standard in accordance with EN WATER Labflex provides taps with a mixing tap or with separate hot and cold taps. Single cold water tap Separate hot and cold mixer tap Single cold water tap with a wrist-action handle Mixer tap with two wrist-action handles Single mixer tap Single tap for distilled water GASES Labflex provides as standard all purity variants and gas types. Taps suspended from service bridge: Worktop-mounted taps in service spine: EYE WASH Single Double Single Double Fitted to worktop Two eyewash heads Single Double Single Double Single Double Single Double Single Single 15 ACCESSORIES

16 16

17 SPECIFICATIONS OPERATION 17

18 System 16: Island setup CABINETS AND DRAWERS FOR ISLAND SETUP WIDTHS (in mm) Top cabine (H: /780)* 500 Drawer cabinet (H: 805)** 500 Underbench cabinet (H: 805)* 500 Sink cabinet (H: 805)* 1200 End sink cabinet (H: 805) 1530 *) Cabinets with doors and widths greater than mm are available with double doors. Sink cabinets are not moveable **) Drawer cabinets are available with 2+1, 3+1 or 5 drawers WORKTOPS FOR ISLAND SETUP LENGTHS (in mm) Worktop Sink worktop 1200 End sink worktop 1 With island setups, sink unit worktops can also be positioned in parallel on the service spine and are available in lengths up to 1800 mm. 18

19 Plans and Elevations 200 System16_3D 0 Data Gas Lysafbryder Gas x230V Data Gas Lysafbryder S16 Island position 1 : S16 Cross Section1 1 : 20 S16 Cross Section 1 : Data 1 Gas SS Lysafbryder A480 0 LAM LAM LAM LAM SS A MIX ØS _S16_Island plan 1 : LAM ABBREVIATIONS Worktops SS AISI 316 steel worktop with raised edges (T30 mm) LAM Laminate worktop (T30 mm) ELECTRICITY 2 x 230 V double socket per workstation 2 x empty double back-box incl. white frames per workstation 1 x light switch per position Taps MIX 1 x mixer tap per sink ØS 1 x eyewash per sink GAS 1 x gas outlet per workstation Sink A480 Steel AISI 316 sink (W480 x D340 x H180 mm) _S16_WallPosition_Plan 1 : 20 LAM S16 Cross Section 1 : System16_3D

20 System 16: Wall setup CABINETS AND DRAWERS FOR WALL WIDTHS (mm) Top cabinet (H: /780)* 500 Drawer cabinet (H: 805)** 500 Underbench cabinet (H: 805)* 500 Sink cabinet (H: 805)* 1200 *) Cabinets with doors and widths greater than mm are available with double doors **) Drawer cabinets are available with 2+1, 3+1 or 5 drawers. WORKTOPS FOR WALL LENGTHS (in mm) Worktop Sink worktop

21 LAM _S16_WallPosition_Plan 1 : 20 Plans and Elevations System16_3D System16_3D Gas 2x230V 0 Data 3700 LAM Gas Lysafbryder SS Revision No. Revision Des 35 System 16 Wall position 1 : 20 S16 Cross Section1 1 : A S16 Cross Section1 1 : 20 Project Labflex Building/Dept. - Sheet Name System16 Set LAM MIX ØS 210 LAM S16 Cross Section 1 : 20 ABBREVIATIONS Worktops LAM Laminate worktop (T30 mm) Taps GAS 1 x gas outlet per workstation ELECTRICITY 2 x 230 V double socket per workstation 2 x empty double back-box incl. white frames per workstation 1 x light switch per position 21

22 Technical specifications TOP CABINET WITH DOORS The cabinets consist of a carcase with a moveable shelf and doors. The carcase and shelf are made from 19 mm melamine-coated panels. The doors are made from 19 mm laminate-coated chipboard with or without panes made from hardened glass with a frame made from either laminate or aluminium. The doors are supplied with an aluminium handle as standard and have Labflex Omega hinges with an opening angle of 270 degrees. The cabinets rear lining is made from 6 mm melamine-coated MDF. All edges have a 1 mm ABS edge band. The cabinets are assembled using glue and dowels DRAWER CABINETS AND UNDERBENCH CABINETS The underbench cabinets consist of a moveable shelf and a single or double door. The drawer cabinets consist of a carcase with varying drawers. The carcase and shelf are made from 19 mm melamine-coated panels. Doors and drawers are made from 19 mm laminate-coated chipboard and have aluminium handles. All of the cabinets have a bead ribbon band on the edges to act as a dust seal. The cabinets rear lining is made from 6 mm melamine-coated MDF. All edges have a 1 mm ABS edge band. The cabinets are assembled using glue and dowels The drawers fully open on stainless steel sliding rails. Drawer sides are made from 19 mm laminate-coated chipboard, and drawer bases and rear sections are made from 16 mm melamine-coated chipboard. All visible edges have a glued-on 1 mm edge band made from ABS plastic. MODULE SIDES FOR BASKETS/TRAYS Module sides are supplied in injection-moulded ABS and can be used with standard tray/basket modules x 400 mm and 400 x mm. PLINTHS Plinths are mm in height and made from 18 mm waterproof plywood coated with dark grey laminate in colour F2297 Terril. Plinths are supplied as standard with adjustable feet. Plinths can also be supplied without adjustable feet, if desired.. END SINK UNIT The end sink unit consists of a cabinet made from 19 mm white laminate-coated panels, doors and an aluminium handle. Sink unit worktops have raised edges on all edges. WEIGHING COLUMN The weighing column consists of a granite weighing stone, which is fixed to an anti-vibration plate. The table top is made of laminate and mounted on a steel frame with adjustable feet. SPLASHBACK Hardened glass is 4 6 times stronger than standard glass and granulates into small blunt pieces if broken. These small blunt granules are the reason why hardened glass is categorised as a safety glass. Hardened glass also has high heat resistance, of up to approx. 200 C. TALL CABINETS Tall cabinets consist of a carcase and four moveable shelves made from 19 mm chipboard coated in g white (RAL 9016) melamine. Their rear lining is made from 6 mm melamine-coated MDF. All edges have a 1 mm ABS edge band. Front edges have an integrated dust-seal profile with bead ribbon. The cabinets are assembled using glue and dowels. DOORS The laminate doors are made from 19 mm laminate-coated chipboard and have an aluminium handle as standard and have Labflex Omega hinges with an opening angle of 270 degrees. All edges have a 1 mm ABS edge band. Glass doors are supplied with 4 mm hardened glass and a frame made from 19 mm laminate-coated chipboard. The glass is secured on the rear using plastic beading that is easy to clean. All edges have a 1 mm ABS edge band. JOINTS Wet room silicone 512 is a neutral, highly elastic sealant. It hardens in reaction to the air humidity and forms an elastic joint that can absorb movements of up to 25%. Skin formation: approx minutes at 23 C and 50% rela tive air humidity. Curing: 1 2 mm/24 hours at 23 C and 50% relative air humidity. COLOR CODES Colour coding for taps are as standard in accordance with EN Labflex components are made from melamine, laminate and compact laminate, and as standard are in the colour RAL Plinth with laminate coating have the color F2297 Terril. All steel components are in the colour RAL 9016, gloss

23 Technical specifications SERVICE CHASE Service chases have white melamine sides and an access hatch for servicing and installation of hoses and pipe routing. When connecting from the ceiling or floor, the elements are routed via a duct to their tap outlet. The tap can be positioned either in the service bridge, under the cabinets or in the service spine. If the tap outlet is to be installed in a service bridge, and the connection is from the floor, the hoses will run inside the service spine and up through the leg that holds the service bridge in position. If the connection is from the ceiling, the service chase is used to hide hoses and pipework. If the tap outlet is installed in the service spine, the connection from the floor will run directly up to the service spine s top plate, where the connection through the service chase will be run directly to the service spine and up at the centre of the worktop. SERVICE BRIDGES The service bridge is executed using electric ducts made from extruded aluminium, which are powder coated in white RAL 9016 with a coating that is at least 80 μm. The service bridge functions as a supporting element for top cabinets with an island system with interior pipes and cable connections to electrical sockets, gas and water taps. Cables are as standard placed in casing pipes in accordance with the safety requirements on the separation of electricity and other media. The taps are fitted suspended in the service bridge. LIFETIME Labflex products are supplied with a product and repeat-order guarantee. Labflex provides a service concept, which consists of the following services: Installation Installation test Training Inspection and maintenance Advice Labflex always provides servicing that is in accordance with the applicable standards, for example our fume cupboard servicing is in accordance with DS 457 and EN SUSTAINABILITY Labflex collaborates with the Forest Stewardship Council (FSC). An FSC-certified forest guarantees that the number of trees that are felled in a forest never exceeds the forest s regenerative capacity. This collaboration enables sustainable production. QUALITY/CERTIFICATES All taps are certified in accordance with ISO 1 and approved by the Danish Gas Technology Centre (DG). SERVICE SPINES The service spines are supplied in the dimensions: Panel depth: 200 / mm Panel height: 713 / 905 mm with stationary tables Panel height: 905 mm with height-adjustable tables The panels are sealed in the end with gable end panels. Gable ends and sides on the service spine are made from machined 037 DIN 2395A grade steel, which is powder coated with a coating of at least 80 μm in white RAL LOAD-BEARING CAPACITY AND BENDING Worktops, cabinets, drawers and shelves have different load-bearing capacities, depending on various factors such as dimensions, choice of material, loads, building conditions, etc. Contact Labflex for more specific information about load-bearing capacity and maximum loads for the individual furniture solution. The taps can be positioned in the top panel and servicing of the pipe and cable connections can be carried out via the service spine s removable front panel. The base plate is made from laminate-coated water-repellent plywood. Service spines for height-adjustable tables are equipped with electrical sockets in the base plate. The service spine must be secured to the concrete floor. 23

24 Technical specifications INSTALLATIONS Lighting The service bridge can be supplied with an LED printed circuit board for installation under top cabinets: 4000 K, MacAdam 3 19 W/m LED printed circuit board Minimum RA90 External power supply/control box DALI and 1 10 V compatible in relation to dimming Dimmer unit 1 10 V: 10%. There is light along the entire length of the fitting (at each end there is only mm that is not illuminated). Electricity All electrical sockets are as standard classified IP20 Cable thickness: 1.5 mm2 230 V / 16 A Type: DK or SCHUKO Marking of positioning: Dymo or engraving. Pure gasses 6.0 Max. pressure brass: 21 bar / 305 psi. Open/close turning function: 1.5 x 360 degrees. Max. pressure stainless steel: 16 bar / 232 psi. Open/close turning function: 1.5 x 360 degrees. Flammable gasses Max. working pressure: 7 bar / 102 psi. Pressure/turn function: 90 degrees. The owner/user is responsible for the use and maintenance of the gas installation. It is recommended that every year the gas installation is checked for leaks, fixed gas appliances are checked for combustion, and hoses and pipes are inspected. Gas, water and air Gas, water and air taps are integrated in the service bridge. All taps meet the requirements of the applicable norms and standards. Colour coding of taps is in accordance with EN All types of gas, water and air taps are supplied as standard with flex pipe/flex hoses. Technical gasses 2.0 Max. pressure: 16 bar / 232 psi. Open/close turning function: 3 x 360 degrees. Vacuum Pressure for vacuum: 1 16 bar / psi. Open/close turning function: 1.5 x 360 degrees Pure gasses 5.0 Max. pressure: 21 bar / 305 psi. Microflow top part: 7.5 x 360 degrees. Max. pressure: 21 bar / 305 psi. High flow top part: 1.5 x 360 degrees. Max. pressure: 21 bar / 305 psi. Needle top part: 3 x 360 grader (fine regulation). 24

25 Interfaces PIPE LAYING FROM CEILING Vand Luft Gas EL Ventilation PIPE LAYING FROM FLOOR Vand Luft Gas EL Ventilation INTERFACES Contact Labflex for further information about interfaces. 25

26 CABINETS COMBINATIONS 26

27 Top cabinets Labflex recommends that cabinet modules are selected in standard widths, as shown in the overview: WALL 330 STANDARD OPTION f16db77562dccb2f4c7b1be114 00D330 - Wo 489f16db77562dccb2f4c7b1be114 00D330 - Wo fe4bab f0bd6758c7b88f6 00D350 - Solid e ebd70ff2a1a37a D350 - Glass This drawing This the drawing property is the of Labflex property AS. of It Labflex must not AS. be It must copied not or be reproduced copied or without reproduced written without permission. written permission Top Top cabinet cabinet - wall - wall HD330 - Wo Wo : 25 1 : 25 fe4bab f0bd6758c7b88f6 00D350 - Solid Top Top cabinet cabinet - wall - wall - - HD350 - Solid - Solid : 25 1 : 25 e ebd70ff2a1a37a D350 - Glass Without door With laminate door With glass door With laminate door FOR DUAL ACCESS 500 Top Top cabinet cabinet - wall - wall HD350 - Glass Glass STANDARD OPTION : 25 1 : 25 roducts can can be be delivered with with locks htt Doors can be Doors hinged can inb Top Top cabinet cabinet double - wall access - HD330 HD350 - Solid - Wo Glass door, shelf Tlf.: Tlf.: Tlf.: Tlf.: Tlf.: Format 1 : 25 1 : Format A3 Fax: Fax: Fax: Fax: Fax: info@labflex.com info@labflex.com info@labflex.com TopCabinet_Wall 330 info@labflex.com info@labflex.com / Format cm 10 mm A3 Tlf.: Tlf.: Format cm 10 mm PPage 4 Fax: Fax: PPage 4 TopCabinet_Wall info@labflex.com info@labflex.com Format cm Format 10 mm A3 A3 1 cm 10 mm PPage 4 PPage 4 TopCabinet_Wall - A3 With glass door - A / oducts can be delivered with locks. roducts can be delivered with locks oducts can be delivered with locks Top cabinet - wall - HD330 - Wo 1 : 25 Top cabinet - wall - HD330 - Wo 1 : Top cabinet - wall - HD350 - Solid 1 : Top Top cabinet cabinet - wall - wall - HD350 - HD330 - Solid - Wo 1 : 25 1 : 25 Top cabinet - wall - HD330 - Wo Top 1 cabinet : 25 - wall - HD350 - Glass 1 : Top Top cabinet cabinet - wall - wall - HD Glass - Solid 1 : 25 1 : 25 This drawing This the drawing property This the of drawing Labflex property is AS. the of It Labflex property must not AS. of be It Labflex must copied not AS. or be It reproduced must copied not or be without reproduced copied written or without reproduced permission. written without permission. written permission. Doors can be Doors hinged can Doors in be both hinged can left be hinged and both right in left side. both and left All right products and side. right All can side. products be All delivered Doors products can be can with delivered can be Doors locks. be hinged deliver can with inb Top cabinet - wall - HD350 - Solid Top cabinet - double access - Solid door, shelf 1 : 25 1 : Top cabinet wall HD350 - Glass Top Top cabinet cabinet - double - wall access - HD330 - Glass - Wo door, shelf 25 1 : 25 1 : Top Top cabinet cabinet - double - wall access - HD350 - Glass - Solid door, shelf 1 : 25 1 : 25 1 cm1 cm10 mm 10 mm PPage PPage Format A3 ng not is be the copied property or reproduced of Labflex AS. without This It must drawing written not be permission. the copied property or reproduced of Labflex without AS. It must written not permission. be copied or reproduced without written permission htt T 1 htt T 1 htt T 1 T 1 htt T 1

28 Underbench cabinets CABINETS ON PLINTH STANDARD OPTION Door Drawers (5) Drawers (3+1) Drawers (2+1) Door and drawers SINK CABINETS STANDARD Door ced.dk/model/03380fb790f4aca8febf26efb4dad23a Solid door, suspended Sink Sink unit unit - Solid - Solid door, door, suspended 1 : 25 1 :

29 Tall cabinets WITH SHELVES STANDARD OPTION d Without door Without door Door Door 229ff37e2f67a1 Tlf.: Fax: Tlf.: Fax: Tlf.: t side. All products Fax: +45 can be delivered with locks. info@labflex.com Tlf.: Fax: info@labflex.com Tlf.: Fax: info@labflex.com Tlf.: Fax: info@labflex.com /c e37131dc229ff37e2f67a1 door, 4 shelves - D /5171d05487f2bc02f9b9dad3fa053b6b door, 4 shelves - D Format A3 Tall Cabinet - Solid door, 4 shelves Tlf.: Fax: info@labflex.com rawing is the property of Labflex AS. It must not be copied or reproduced without written permission. Doors can be hinged in in both left and right side. All products can be delivered with locks. Tlf.: Fax: info@labflex.com Doors can be hinged in in both left and right side. All products can be delivered with locks.

30 Tall cabinets WITH SHELVES STANDARD Glass door (2/3) /390c7e0eda1e3f15ba5e61a2a3c7c607 door 2/3 glass, 4 shelves - D a2a3c7c607 Glass door (2/3) t side. All products can be delivered with locks. Glass door (2/3 + 1/3) Tlf.: Fax: info@labflex.com /390c7e0eda1e3f15ba5e61a2a3c7c607 door 2/3 glass, 4 shelves - D 09.3 Format A3 - D - D 1 cm 10 mm PaPage 22 This drawing is the property of Labflex AS. It must not be copied or reproduced without written permission. Tall Cabinet - Glass door, 2/3, 4 shelves Doors can be hinged in both left and right side. All products can be delivered with locks. Glass door (2/3 + 1/3) Tlf.: Fax: info@labflex.com D - D Doors can be hinged in both left and right side. All products can be delivered with locks.

31 Tall cabinets 657 FOR BASKETS / TRAYS Door 457 Door 457 Doors can be hinged in both left and right side. All products can be delivered with locks. Glass door (2/3) Doors can be hinged in both left and right side. All products can be delivered with locks Format A3 Tall Cabinet - For trays, w. solid door 1 cm 10 mm PaPage Format A3 Tall Cabinet - For trays, w. solid door 1 cm 10 mm PaPage 25 This drawing is the This property drawing of Labflex is the property AS. It must of Labflex not be AS. copied It must or reproduced not be copied without or reproduced written permission. without written permission Glass door (2/3 ) Format A3 t side. DoorsAll can products be hinged canin beboth delivered left and with right locks. side. All products can be delivered with locks. Tall Cabinet - For trays, w. glass door awing rty of is Labflex the property AS. It must of Labflex not be AS. copied It must or reproduced not be copied without or reproduced written permission. without written permission Format A3 Tall Cabinet - For trays, w. glass door awing rty of is Labflex the property AS. It must of Labflex not be AS. copied It must or reproduced not be copied without or reproduced written permission. without written permission.

32 labflex.dk Labflex is one of Europe s largest suppliers of innovative and customer-specific furniture solutions for hospitals, laboratories and the education sector. Working in collaboration with contractors, architects and engineers from the start of the process to the delivery of the finished interior design Labflex creates future-proof laboratories. For more information, visit 32 HEAD OFFICE Labflex A/S Marielundvej 45 A DK Herlev DENMARK Labflex A/S Hjortevej 3 DK Skive UK Labflex Limited Pegasus Business Park Castle Donington UK - DE74 2TZ T T T +44 (0)