Type 5347 (TR/STL), Type 5348 (TR/ST) and Type 5349 (STM/STL) Double Thermostats
|
|
|
- Moses Stokes
- 6 years ago
- Views:
Transcription
1 Thermostats Type 343 Safety Temperature Monitor (STM) Type 344 Temperature Regulator (TR) Type 34 Safety Temperature Limiter (STL) Type 347 (TR/STL), Type 348 (TR/ST) and Type 349 (STM/STL) Double Thermostats Application Typetested thermostat for temperature control in heat-generating plants and for use in HVAC applications Thermostats functioning according to the liquid expansion principle with thermowells (accessories) Special features Can be mounted either as a contact thermostat or as a thermostat with thermowell Easy to wire using spring-clamp terminals Switching capacity 16 A, 230 V Stable switching point thanks to ambient temperature compensation Degree of protection IP 4 Safety temperature monitor (STM) Snap-action switch and automatic reset Set point can be adjusted with a screwdriver after opening the housing The electric circuit is opened when the measuring system fails Temperature regulator (TR) Snap-action switch for temperature control External set point adjustment at rotary knob Set point range can be mechanically limited Snap-action switch Reset by unlocking with a screwdriver Set point can be adjusted with a screwdriver after opening the housing The electric circuit is opened when the measuring system fails Type 343 Safety Temperature Monitor (STM) Type 344 Temperature Regulator (TR) Type 347 Double Thermostat (TR/STL) Type 348 Double Thermostat (TR/STM) Typetesting The thermostats are tested by the German Technical Inspectorate (TÜV) according to DIN EN The corresponding DIN register numbers are listed in the Mounting and Operating Instructions u EB 206. Type 34 Safety Temperature Limiter (STL) Type 349 Double Thermostat (STM/STL) Fig. 1: Types 343, 344, 34 Single Thermostats Types 347, 348, 349 Double Thermostats Associated Information Sheet u T 200 Edition October 2017 Data Sheet T 206 EN
2 Versions Safety temperature monitor (STM) Type Set point range 0 to 60 C Type Set point range 40 to C Type Set point range 70 to 130 C Type Set point range 3 to 9 C Temperature regulator (TR) Type Set point range 0 to C Type Set point range 20 to C Type 34-1 Set point range 70 to 130 C Type 34-2 Set point range 30 to 90 C Double thermostats (TR/STL) Type Set point range (TR) 0 to C Set point range (STL) 70 to 130 C Type Set point range (TR) 0 to C Set point range (STL) 30 to 90 C Double thermostats (TR/STM) Type Set point range (TR) 0 to C Set point range (STM) 70 to 130 C Type Set point range (TR) 0 to C Set point range (STM) 40 to C Double thermostats (STM/STL) Type Set point range (STM) 70 to 130 C Set point range (STL) 30 to 90 C Accessories Thermowells for single thermostats (STM, TR, STL) Nickel-plated brass CuZn (2.0401) max. pressure at C: 48 bar x 8 mm Order no x 8 mm Order no x 8 mm Order no CrNiMo steel (1.471), max. max. pressure at C: 88 bar x 8 mm Order no x 8 mm Order no x 8 mm Order no Thermowells for double thermostats (TR/STL, TR/STM, STM/STL) Nickel-plated brass CuZn (2.0401) max. pressure at C: 48 bar x (2x 8 mm) Order no x (2x 8 mm) Order no CrNiMo steel (1.471), max. pressure at C: 48 bar x 1 mm Order no x 1 mm Order no x 1 mm Order no Strap for mounting the contact thermostat Ø 1 to mm Order no Principle of operation Safety temperature monitor (STM) The snap-action switch is triggered if the temperature at the bulb rises above the adjusted set point. When the temperature falls below the set point by approximately 8 K, the switch returns to its original position. The electric circuit is opened when the temperature at the bulb falls below 20 C. The circuit is automatically closed again when the temperature at the bulb rises above 20 C. The electric circuit is opened when the measuring system fails. Temperature regulator (TR) The snap-action switch is triggered if the temperature at the bulb rises above the adjusted set point. When the temperature falls below the set point by approximately 4 K, the switch returns to its original position. The snap-action switch is triggered and locked if the temperature at the bulb rises above the adjusted set point. When the temperature falls below the set point by approximately 10 %, the snap-action switch can be unlocked manually. The electric circuit is opened when the temperature at the bulb falls below 20 C. The circuit is automatically closed again when the temperature at the bulb rises above 20 C. The electric circuit is opened when the measuring system fails. It is not possible to unlock the device. Mounting Wall mounting or mounting as a contact thermostat using a strap (for 1 to mm pipe diameters) Thermowell mounting with extendable capillary (up to 2000 mm) Mounting position Contact thermostat: the thermostat must not be suspended with the bottom of the housing (containing the bulb) facing upwards. Thermostat with thermowell: any position is possible. Electrical connection Temperature regulator (TR), safety temperature monitor (STM) Also available: Type Frost Protection Thermostat (set point range 10 to +12 C) to monitor the temperature in air ducts containing non-corrosive gases. Refer to Data Sheet u T 207 NC contact 1 2 NO contact T 206 EN
3 Technical data Single thermostats: Type 343 (STM), Type 344 (TR), Type 34 (STL) Double thermostats: Type 347 (TR/STL), Type 348 (TR/STM), Type 349 (STM/STL) Permissible ambient temperature Transportation and storage 30 to +80 C Service Max. 80 C Max. pipe temperature when Max. C mounted as a contact thermostat Degree of protection IP 4 according to EN 6029 Cable entry Minimum switching capacity Maximum switching capacity Safety temperature monitor (STM) Temperature regulator (TR) Influence of mean ambient temperature based on the set point Connection Materials Bottom section of the housing Housing cover Bulb and capillary Weight Single thermostat Double thermostat M20x1. cable gland, suitable for 6 to 12 mm cable diameter AC/DC = 24 V, ma With 230 V AC +10 % With 230 V DC +10 % With 230 V AC +10 % With 230 V DC +10 % With 230 V AC +10 % With 230 V DC +10 % NC contact: 16 (2.) A; cos j = 1 (0.6) NO contact: 6.3 (2.) A; cos j = 1 (0.6) NC contact: 0.2 A NO contact: 0.2 A NC contact: 16 (2.) A; cos j = 1 (0.6) NO contact: 6.3 (2.) A; cos j = 1 (0.6) NC contact: 0.2 A NO contact: 0.2 A NC contact: 16 (2.) A; cos j = 1 (0.6) Signal contact: 2 (0.4) A; cos j = 1 (0.6) NC contact: 0.2 A Signal contact: 0.2 A A shift of the switching point arises when the ambient temperature at the knob and at the capillary deviates from the calibration ambient temperature of + C: Higher ambient temperature g Lower switching point Lower ambient temperature g Higher switching point This influence is minimized by temperature compensation. Spring-clamp terminals, 0.7 to 2. mm² wire cross-section PA (reinforced) ABS with window (PMMA) Cu (copper) Approx. 0. kg Approx. 0.4 kg T 206 EN 3
4 Single thermostat Function Set point range STM 0 to +60 C 8 K Switching point accuracy Range: 0 to 2 C 0 K 8. K Range: 2 to 3 C 0 K 6.0 K Range: 3 to 60 C 0 K 8. K Max. medium temperature STM 40 to C 8 K Range: 40 to C 0 K 8. K 12 C STM 70 to 130 C 8 K Range: 70 to 130 C 0 K 8. K 1 C STM 3 to 9 C 8 K Range: 3 to 9 C 0 K 8. K C TR 0 to C 3 K TR 20 to C 4 K Range: 80 to C +3.6 K 3.6 K Range: 20 to 106 C +7.8 K 7.8 K Range: 106 to C +3.9 K 3.9 K 8 C 14 C 17 C 34-1 STL 70 to 130 C 8 K Range: 70 to 130 C +8. K 8. K 1 C 34-2 STL 30 to 90 C 8 K Range: 30 to 90 C 0 K 8. K 11 C Double thermostat Function TR/STL TR/STL TR/STM TR/STM STM/STL Set point range Switching differential Switching differential TR: 0 to C 3 K Switching point accuracy Range: 80 to C +3.6 K 3.6 K STL: 70 to 130 C 8 K Range: 70 to 130 C 0 K 8. K TR: 0 to C 3 K Range: 80 to C +3.6 K 3.6 K STL: 30 to 90 C 8 K Range: 30 to 90 C 0 K 8. K TR: 0 to C 3 K Range: 80 to C +3.6 K 3.6 K STM: 70 to 130 C 8 K Range: 70 to 130 C 0 K 8. K TR: 0 to C 3 K Range: 80 to C +3.6 K 3.6 K STM: 40 to C 8 K Range: 40 to C 0 K 8. K STM: 70 to 130 C Range: 70 to 130 C 0 K 8. K 8 K STL: 30 to 90 C Range: 30 to 90 C 0 K 8. K Max. medium temperature 14 C 11 C 14 C 12 C 14 C 4 T 206 EN
5 Dimensions in mm Single thermostats Type 343 Safety Temperature Monitor (STM) Ø Ø 8 Type 344 Temperature Regulator (TR) Ø Ø 8 Type 34 Safety Temperature Limiter (STL) 3 42,4 Ø 4, Ø 8 Metal plate and screw for fastening the thermostat onto the thermowell (wall mounting) T 206 EN
6 Double thermostats Type 347 Double Thermostat (TR/STL) 9.4 Ø Ø 1 Type 348 Double Thermostat (TR/STM) 9.4 Ø Ø 1 Type 349 Double Thermostat (STM/STL) Ø Ø 1 Metal plate and screw for fastening the thermostat onto the thermowell (wall mounting) 6 T 206 EN
7 T 206 EN 7
8 Specifications subject to change without notice SAMSON AG MESS- UND REGELTECHNIK Weismüllerstraße Frankfurt am Main, Germany Phone: Fax: samson@samson.de T 206 EN English
Mounting and Operating Instructions EB 5206 EN. Thermostats. Type 5343 Safety Temperature Monitor (STM) Type 5344 Temperature Regulator (TR)
Thermostats Type 5343 Safety Temperature Monitor (STM) Type 5344 Temperature Regulator (TR) Type 5345 Safety Temperature Limiter (STL) Type 5347 Double Thermostat (TR/STL) Type 5348 Double Thermostat (TR/STM)
Self-operated Temperature Regulators Series 43 Temperature Regulators Type 43-1 Type 43-2
Self-operated Temperature Regulators Series 43 Temperature Regulators Type 43- Type 43-2 Application Regulators for district heating supply systems, heat generators, heat exchangers, and other building
Mounting and Operating Instructions EB 2231 EN
Self-operated Regulators Thermostats Type 223 and Type 2232 Bulb Sensors Type 2233, Type 2234, and Type 2235 Air Sensors Type 223 with bulb sensor Type 2232 with bulb sensor (separate) Type 2233 with air
Catalog. Self-operated Regulators Volume 2 Temperature Regulators
Catalog Self-operated Regulators Volume 2 Temperature Regulators Self-operated Regulators Temperature Regulators Volume 2 Catalog 2012 Overview Self-operated Temperature Regulators 5 Self-operated Pressure
Differential Pressure and Flow Meter. Media 5 Indicator 160 Ø PN 50
Differential Pressure and Flow Meter Media 5 Indicator 160 Ø PN 50 Application Transmitter for measuring and indicating the differential pressure or measured variables derived from it Suitable for gases
Control Thermostat / Thermal Reset Limit Thermostat Combination of electromechanical TR and TW
1 212 Double thermostat Control Thermostat / Thermal Reset Limit Thermostat Combination of electromechanical TR and TW RAZ-TW... 2-position control thermostat and thermal reset limit thermostat with singlepole
Frost Protection Thermostat
1 203 Frost Protection Thermostat Electromechanical thermal reset limit thermostat RAK-TW.5..H RAK-TW.5..H.. Use Monitoring of frost protection temperature, with single-pole changeover microswitch Switching
Differential Pressure and Flow Meter Media 5 Indicator 160 PN 40
Differential Pressure and Flow Meter Media 5 Indicator 160 PN 40 Application Instrument designed to measure and indicate differential pressure or measured variables derived from it For gases or liquids
When ordering, please state type and code number. Max. Type - Capillary sensor of tube temp. charge length. C m
Technical data and code nos. When ordering, please state type and code number. Thermostats with cylindrical remote sensor Adjustable differential range*) Types of charge A: Vapour charge - sensor must
Thermometers with capillary tube. Bimetal thermometers. Industrial thermometers. Resistance thermometers
Thermometers with capillary tube Bimetal thermometers Industrial thermometers Resistance thermometers CHAPTER Temperature measuring instruments and controllers OVERVIEW Mechanical temperature measuring
QAF64.2-J QAF64.6-J. Frost detector. for use on the air side
s Frost detector for use on the air side QAF64.2-J QAF64.6-J With active capillary tube sensing element for acquiring the lowest temperature within a range of 0 15 C With startup function Operating voltage
Thermal Reset Limit Thermostats Electromechanical TW according to DIN EN 14597
1 202 Thermal Reset Limit Thermostats Electromechanical TW according to DIN EN 14597 RAK-TW.1..H RAK-TW.1..H.. Use Function Changeover switch (S.P.D.T.) 2-position thermal reset limit thermostat with single-pole
Thermostat RT. Data sheet
Data sheet Thermostat RT RT thermostats incorporate a temperature controlled, single-pole change over switch where the contact position depends on the temperature of the sensor and the set scale value.
QAF63.2 QAF63.6. Frost sensors for use on the air side. Building Technologies HVAC Products
1 821 1821P01 Frost sensors for use on the air side Active capillary tube sensor for measuring the lowest temperature within a range of 0 15 C Operating voltage AC 24 V Signal output DC 0...10 V Use On
The T6140A,B Remote Bulb Temperature Controller
T640A,B Remote Bulb Temperature Controller The T640A,B Remote Bulb Temperature Controller is used as a unit mount temperature controller in electric heat, fan coil, room air conditioner applications, cold
Frost Units for air temperature monitoring
284 284P0 Frost Units for air temperature monitoring QAF8... Robust aluminium die-cast housing Responds to temperature change sensed over any 30 cm length of capillary Small switching differential Good
Safety Temperature Limiter STL 50 Certified to DIN EN (replaces DIN 3440)
Safety Temperature Limiter STL 50 Certified to DIN EN 14597 (replaces DIN 3440) Features M For use as: STB Protection - temperature limiter ASTB Exhaust gas - protection - temperature limiter STW Protection
Automation System TROVIS 5400 Boiler Controller TROVIS 5474
Automation System TROVIS 5400 Boiler Controller TROVIS 5474 Application Weather-sensitive control of up to two boilers, designed for single-stage, two-stage or also modulating operating mode. Communication
SPDT contacts: C/NO/NC. Contact Rating 16(4)A 250Vca. 7A1-1R306-00A A1-6R306-00A A A A A 10 90
ENCASED THERMOSTATS Derived from the range of capillary control thermostats and limiters with liquid filled sensing element, they are the accurate, reliable and easily set-up devices for the regulation
Hygro and Hygrothermo Transducers (capacitive) for climatic applications
Data sheet 907020 Page 1/7 Hygro and Hygrothermo Transducers (capacitive) for climatic applications To measure relative humidity and temperature For versatile climatic applications and ventilation For
Series A36 3- and 4 Stage Thermostats for Refrigeration, Cooling, Heating, Ventilation and Air-conditioning. Feature and Benefits
PSC966 European Refrigeration Controls Catalogue Catalog Section Product Bulletin A6 Series A6 - and 4 Stage Thermostats for Refrigeration, Cooling, Heating, Ventilation and Air-conditioning Introduction
Gas expansion thermometer
Gas expansion thermometer Type series FN. Features High quality case with bajonet ring /160, degree of protection IP 66 Nominal ranges -40 C 700 C, further nominal ranges from -200 C...700 C upon request
TRV 300 RADIATOR VALVES
RADIATOR VALVES THERMOSTATIC HEADS Placed on radiator valves, these self-acting thermostatic heads for adjusting temperature are reliable, accurate, and long-lasting. LIQUID FILLED SENSOR ELEMENT For higher
Aquastats. Aquatrol Indoor/Outdoor Control. Automatic Changeover Switch 16/05/08
16/05/08 Aquatrol Indoor/Outdoor Control B3 Adjustable settings for boiler maximum temperature, boiler minimum temperature and outdoor low (design) temperature Selectable Warm Weather Shut Down (WWSD)
for relative humidity and temperature with calibration certificates
1 859 1859P01 1859P02 QFA4160 AQF4150 Symaro Room Sensor for relative humidity and temperature with calibration certificates QFA4160 Operating voltage AC 24 V or DC 13.5...3 Signal output DC 0...10 V for
Duct Temperature Sensors
1 762 1761P03 1762P01 Mounting flange AQM630 QAM21 Symaro Duct Temperature Sensors QAM2161040 QAM2171040 Active sensors for acquiring the air temperature in air ducts AC 24 V or DC 13535 V Signal output
for relative humidity and temperature
1 860 1860P01 Duct sensor for relative humidity and temperature QFM651 Operating voltage AC 24 V Signal output DC 010 V for relative humidity Signal output L&S Ni 1000 (passive) for temperature Measurement
for relative humidity and temperature
1 861 1861P01 Duct sensor for relative humidity and temperature QFM65 Operating voltage AC 24 V Signal output DC 0...10 V for relative humidity and temperature Measurement accuracy ±3 % r. h. within the
T4031A,B,P; T6031A,B Refrigeration Temperature Controllers
T4031A,B,P; T6031A,B Refrigeration Temperature Controllers FEATURES PRODUCT DATA Wide control temperature range is suitable for controlling ducts, tanks, freezers, coolers, display cases. and defrost termination.
THERMOSTATIC EXPANSION VALVES AND THERMOSTAT CONTROL DEVICES
FUNCTION Thermostatic expansion valves are used to regulate and cut-off the flow of the heat transfer fluid that circulates inside airconditioning system terminals (radiators, fan coils, etc.). Thermostat
Ionisation single-tube smoke detector for duct mounting
Detectors Ionisation single-tube smoke detector for duct mounting 600 mm venturi tube is included., incl. end resistor (not RAC(M)) 9...33 V DC (via ABV control unit). 24 V AC ±15 % for RAC(M) models.
Series A28 Two stage Thermostats. Feature and Benefits
PSC9626 European Refrigeration Controls Catalogue Catalog Section 1 Product Bulletin A28 Series A28 Two stage Thermostats I ntroduction These thermostats are designed for various types of heating, cooling,
Hygrostats (hygrometric)
Data Sheet 907032 Page 1/6 Hygrostats (hygrometric) For easy 2-state control of relative air humidity For indoor and air duct mounting With potential-free change-over contact(s) No voltage supply required
THERMASREG TR 040 THERMASREG TR 060
THERMASREG TR 040 THERMASREG Temperature controllers, one-step, Mechanical temperature controllers wet room temperature controllers THERMASREG TR 040 with switching output and stainless steel capillary
Thermostat KPU. Data sheet
Data sheet Thermostat KPU The KPU Thermostats are temperature controlled electrical switches, which are applied for regulation and safety monitoring of refrigeration and air conditioning systems. KPU sensors
Beck. The differential pressure transmitter for air
Beck. The differential pressure transmitter for air Differential pressure transmitter 984 General description The differential pressure transmitters of the 984 series are used to measure differential pressure,
QXA2100. Condensation monitor QXA2101. Monitor to prevent damage caused by condensation on chilled ceilings and HVAC plants with AC/DC 24 V power.
QXA2100 Condensation monitor QXA2100 Monitor to prevent damage caused by condensation on chilled ceilings and HVAC plants with AC/DC 24 V power. Application Monitors condensation build up in buildings
TC-5231 Series, TC-5232, & TC-5241 Series
TC-5231 Series, TC-5232, & TC-5241 Series Low Temperature Thermostats General Instructions Application The TC-5231, TC-5232, and TC-5241 low temperature thermostats are used to control temperature in air
Hygro and hygrothermo transducers (capacitive) for HVAC monitoring
Data Sheet 90.7021 Page 1/6 Hygro and hygrothermo transducers (capacitive) for HVAC monitoring for measuring relative humidity and temperature for HVAC applications as indoor, wall and duct versions special
Multilux 4-Eclipse-Set
Multilux -Eclipse-Set Design-Edition with two-point connection, angle and straight type, for R / and connection, with automatic flow limitation IMI HEIMEIER / Design-Edition / Multilux -Eclipse-Set Multilux
Installation and operation manual DPC200 - DIFFERENTIAL PRESSURE CONTROLLER. Low pressure with PI-control-mode
Installation and operation manual DPC200 - DIFFERENTIAL PRESSURE CONTROLLER Low pressure with PI-control-mode Manufacturer: Phone: Fax: E-Mail: Website: Issue: Doc.-no.: Arthur Grillo GmbH Am Sandbach
1592P01. for liquids in piping DN max. DC 48 V, 1 A, 20 W
594 59P0 Flow switch for liquids in piping DN 0 00. QE90 Contact load / switching capacity: Nominal pressure PN5 Manual setting of contact type (NO / NC) Housing IP 65 / safety class II Maintenance free
IMMERSION HEATERS IMMERSION HEATERS FOR WATER 1½ BRASS NIPPLE, 3X400V: 2 BRASS NIPPLE, 3X400V:
1½ or 2 RG IMMERSION HEATERS PAGE 1/5 Immersion heaters* are used to heat a variety of mediums, e.g. water, glycol, oil, and other liquids. It is important that the immersion heater is fitted to the side
QAF63.2-J QAF63.6-J. Frost detectors. for use on the air side
s Frost detectors for use on the air side QAF63.2-J QAF63.6-J Active capillary tube sensor for acquiring the lowest temperature within a range of 0 15 C Operating voltage AC 24 V Signal output DC 0...10
THERMOSTATIC EXPANSION VALVES AND THERMOSTAT CONTROL DEVICES
FUNCTION Thermostatic expansion valves are used to regulate and cut-off the flow of the heat transfer fluid that circulates inside airconditioning system terminals (radiators, fan coils, etc.). Thermostat
270XT Freeze Protection, IP30
270XT Freeze Protection, IP30 Sensing element is 3 or 6 meters long to permit attaching across the surface of a coil to guard against freezing at any point. When any 30 cm or more of this element senses
Thermostats type KPU REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Thermostats type KPU REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction... 3 Features... 3 Approvals... 3 Technical data... 3 Regulating ranges... 4 Ordering... 4 Contact systems...
Hygro and Hygrothermal Transducers (Capacitive) for Air Conditioning Applications
Data Sheet 907020 Page 1/9 Hygro and Hygrothermal Transducers (Capacitive) for Air Conditioning Applications For measuring relative humidity and temperature For versatile climatic applications and ventilation
Thermostatic head B. Thermostatic heads Secured model designed for public buildings
Thermostatic head B Thermostatic heads Secured model designed for public buildings IMI HEIMEIER / Thermostatic Heads & Radiator Valves / Thermostatic head B Thermostatic head B The thermostatic head B
Use. Functions. Key function. Other functions
2 466 Heating Control System RVP102/SET Heating control system for use in smaller plants. Control of boiler temperature through direct burner control, pump control, weather-compensated setpoint (with or
QFM21... Siemens Building Technologies HVAC Products. Symaro Duct Sensors. for relative humidity and temperature
1 864 1864P01 Symaro Duct Sensors for relative humidity and temperature QFM21... Use Type summary Operating voltage AC 24 V or DC 13.5...3 Signal output DC 0...10 V for relative humidity Signal output
Capacitive leakage detectors of the Leckmaster range for installation in normally dry rooms
Capacitive leakage detectors of the Leckmaster range for installation in normally dry rooms Jola Spezialschalter K. Mattil & Co. KG Klostergartenstraße 11-20 D-67466 Lambrecht (Pfalz) P.O.B. 1149 D-67460
Duct Sensors. Siemens Building Technologies HVAC Products. Symaro. for relative humitidy (high accuracy) and temperature
1 882 1882P01 Symaro Duct Sensors for relative humitidy (high accuracy) and temperature QFM31 Use Examples Operating voltage AC 24 V / DC 1353 Signal output DC 010 V / 4 20 ma for relative humidity and
Screw plug immersion heaters
Screw plug HEATING GASES HEATING LIQUIDS MAINTAINING A CONTINUOUS TEMPERATURE The screw plug by CETAL are designed and manufactured as a standard range or according to customer specifications. Reliability
1592P01. for liquids in piping DN
1 594 1592P01 Flow switch for liquids in piping DN 20 200. QVE1901 Contact load / switching capacity: max. AC 230 V, 1 A, 26 VA max. DC 48 V, 1 A, 20 W Nominal pressure PN25 Manual setting of contact type
Heaters, Thermostats and Hygrostats
Heaters, Thermostats and Hygrostats 154 Automática Electrónica y Control, S.L. Lacy, 30 Acc. - 08202 Sabadell (Barcelona) Tel 937 207 066 Fax 937 209 999 www.automatica-elec.es info@automatica.cat ELECTRO-TECHNOLOGY
Temperature Measurement Transmitters for field mounting
Siemens AG 07 Overview Application The SITRANS TF can be used everywhere where temperatures need to be measured under particularly harsh conditions. For that reasons users from all industries have opted
FTK+ Application. Types Available. Duct sensor for humidity and temperature. Datasheet
FTK+ Duct sensor for humidity and temperature Datasheet Subject to technical alteration Issue date: 03.04.2018 A002 Application Duct humidity and temperature sensor in new hinged lid enclosure USE for
IN LINE MIXED FLOW DUCT FANS AND ELECTRIC HEATER TD-MIXVENT HEATING System
HEATING System fan (from model 25) and a MBE electric heater installed on the discharge side of the fan. + MBE ELECTRIC HEATER MBE heater type - Insulated element rods. - Automatic overheat thermostat
PM100V PM80V PM15V. Ex works. Depending on the specific range of application a regular ecalibration of the sensor head (PMU-V) has to be effected.
Galltec Mess- und Regeltechnik GmbH MELA Sensortechnik GmbH D-71145 Bondorf. Germany D-07987 Mohlsdorf-Teichwolframsdorf. Germany Tel. +49 (0)7457-9453-0. Fax +49 (0)7457-3758 Tel. +49(0)3661-62704-0.
S304 and S305 Dust Emission Monitors. User Manual. Distributor
S304 and S305 Dust Emission Monitors User Manual Distributor Version 6.4 30/5/2012 Table of Contents 1. INTRODUCTION... 3 1.1 Safety... 3 1.2 Product overview... 4 1.3 Principle of operation... 4 2. INSTALLATION...
Sensors and switches. Temperature, Pressure, Humidity, Air flow, CO 2., CO and NO 2
Sensors and switches Temperature, Pressure, Humidity, Air flow, CO 2, CO and NO 2 Regin sensors and switches Comfortable and economic indoor climate To measure is to know. Temperature, carbon dioxide,
QFM21... Duct Sensors. Building Technologies HVAC Products. Symaro. for relative humidity and temperature
1 864 1864P01 Symaro Duct Sensors for relative humidity and temperature QFM21 Operating voltage AC 24 V / DC 13535 V Signal output DC 010 V / 420 ma for relative humidity Signal output DC 010 V / 420 ma
THERMAL MANAGEMENT THERMAL MANAGEMENT. Accessories: GV 400/500 or GV 600/700 AM 420P TRS 60, TRW 60, TWR 60, TKW 60 FILTER FANS SERIES LV
FILTER FANS SERIES LV ROOF MOUNTED FAN For the ventilation of control cabinets, enclosures and housings Different filter mats for dust collection LV series offers low shape and quick mounting EMC versions
HANDBUCH / MANUAL / MANUEL / MANUALE TopScan-S
FACTORY AUTOMATION HANDBUCH / MANUAL / MANUEL / MANUALE TopScan-S Certification Type Tested Inhalt / Content / Sommaire / Indice Deutsch......................................................... 3 English.........................................................
Convertible radiator valve for one-pipe systems, centre distance 35 mm
Convertible radiator valve for one-pipe systems, centre distance 35 mm 56 series ACCREDITED ISO 900 FM 65 033/6 GB Function 56 series convertible radiator valves are used on one-pipe radiator systems.
teide termo plus+ HEATING SERIES SCOPE THERMOSTATIC VALVES SERVICE CONDITIONS COMPONENTS TECHNICAL SHEET 07/2017 IP20060 PAG. 1/9
HEATING SERIES QUALITY BY TRADITION teide termo plus+ TECHNICAL SHEET 07/2017 IP20060 SCOPE The thermostatic valves and heads from TEIDE TERMO PLUS series can be used in individual or collective heating
EBC12-EU-01. Product Instruction fm. EXHAUSTO A/S Odensevej 76 DK-5550 Langeskov
3001434-2006-09-01.fm Product Instruction GB EBC12-EU-01 EXHAUSTO A/S Odensevej 76 DK-5550 Langeskov Tel. +45 65 66 12 34 Fax +45 65 66 11 10 exhausto@exhausto.dk www.exhausto.dk 3001434-2006-09-01.fm
Constant climate chamber with ICH-compliant illumination
KBF P series (E5.2) Constant climate chambers Constant climate chamber with ICH-compliant illumination The BINDER KBF P constant climate chamber, equipped with ICH-compliant illumination, is the expert
QFM21... Duct sensors. Symaro. for relative humidity and temperature
1 864 1864P01 Symaro Duct sensors for relative humidity and temperature QFM21... Operating voltage AC 24 V / DC 13.5...35 V Signal output DC 0...10 V / 4 20 ma for relative humidity Signal output DC 0...10
Flameproof Manual Call Points Series MCP
> Light weight glass reinforced polyester (GRP) Ex d enclosure > Weather resistant high performance red paint finish as standard > Break glass version supplied with test key > Push button version supplied
Residual current monitor RCM470LY/RCM475LY. for TN and TT systems (AC and pulsating DC currents)
Residual current monitor RCM470LY/RCM475LY for TN and TT systems (AC and pulsating DC currents) TDB401003en/03.2010 Residual current monitor RCM470LY Residual current monitor for TN and TT systems (AC
Refrigeration and Air Conditioning Technical leaflet. Electronic controller EKC 201 and EKC 301
Refrigeration and Air Conditioning Technical leaflet Electronic controller EKC 201 and EKC 301 RC.5L.A1.02 RC.5L.A2.02 09-1998 Introduction EKC 201 and 301 are used for temperature control compressor control
HUMIDISTATS and Electronic humidity controls
8 ULTIMHEAT HUMIDISTATS and Electronic humidity controls The professional solution: an extended, rational, and consistent range of products Technical catalogue for R&D department Edition 31/05/2013 E-Mail
Flow switch. Operating Manual. English manual page Page 1 of 15 Fax:
Operating Manual www.jlso-tec-trade.de Flow switch English manual page 1-15 Page 1 of 15 Flow switch Table of Contents Page 1 Device Description and Intended Use... 19 1.1 Flow switch version VH...X...
Heat Sensor Cable Alarm Units DT650L / DT950L
Heat Sensor Cable Alarm Units DT650L / DT950L For conventional and 950 series analogue addressable systems Installation and Commissioning Manual Version 2.1 / May 2004 http://www.geindustrial.com/ge-interlogix/emea
THERMOSTATIC RADIATOR VALVES FOR IRON, COPPER, POLYETHYLENE AND MULTILAYER PIPE PRODUCTION RANGE IRON PIPE CODE CONNECTION
THERMOSTATIC RADIATOR VALVES FOR IRON, COPPER, POLYETHYLENE AND MULTILAYER PIPE CT0031.0_10 EN August 2016 THERMOSTATIC RADIATOR VALVES * * * * 028 * LICENSED USE OF TRADEMARK NR. 43 PRODUCTION RANGE IRON
HYGRASREG RELIABLE PROTECTION AGAINST HUMIDITY FÜHLBARE PRÄZISION PRODUCT RANGE > Mechanical > Electronic > Guards
HYGRASREG RELIABLE PROTECTION AGAINST HUMIDITY > Mechanical > Electronic > Guards PRODUCT RANGE 2017 FÜHLBARE PRÄZISION HYGRASREG MECHANICAL For use in dust-free, non-polluted and non-aggressive air HYGRASREG
DICTATOR Hold-Open Systems for Hazardous Areas
DICTATOR for Hazardous Areas Products to be used in hazardous areas obviously have to meet special demands. The European ATEX directives (first the EN 94/9/EG and then the directive 2014/34/ EU) brought
QFM21... Duct Sensors. Siemens Building Technologies HVAC Products
For latest prices and delivery to your door visit MyTub Ltd - 0845 303 8383 - wwwmytubcouk - info@mytubcouk 1 864 1864P01 Symaro Duct Sensors for relative humidity and temperature QFM21 Use Operating voltage
Room Temperature Controller
3 331 Synco 100 Room Temperature Controller with 2 outputs DC 0 RLA162 Room temperature controller for basic ventilation, air conditioning and heating plants Compact design with 2 analog control outputs
Hygro Transducer / Hygrothermal Transducer and CO 2 Measuring Probe for Climate Monitoring
Data Sheet 907021 Page 1/8 Hygro Transducer / Hygrothermal Transducer and CO 2 Measuring Probe for Climate Monitoring For measuring relative air humidity, temperature, and carbon dioxide concentration
PolyGard Single Point Controller SPC-X3-20XX for refrigerant gases and vapours
PolyGard Single Point Controller SPC-X3-20XX for refrigerant gases and vapours DESCRIPTION Gas measuring, monitoring and warning controller based on state-of-the-art micro-technology with integrated sensor
Constant climate chambers
KBF series (E5.2) Constant climate chambers Constant climate chambers The BINDER KBF is the specialist for unconditionally reliable stability testing and precise maintenance of constant climatic conditions.
ST Wiring diagram. Product description. Standard temperature controller. Order number
ST64-31.10 Standard temperature controller Order number 900197.007 Old Id.Nr.: 386169 Wiring diagram Product description The controller ST64-31.10 was developed for simple thermostatic controls. The round
MELA Sensortechnik GmbH
Galltec Mess- und Regeltechnik GmbH MELA Sensortechnik GmbH Rivenditore: TERSID Srl Via Demostene,15 128 Milano Tel. 02/27001002 Fax 02/2575313 Mail: tersid@tersid.it Sito web: www.tersid.it sensors -
Constant climate chambers
Constant climate chambers KBF P 240 (E2) - Constant climate chamber for photostability tests Specialized equipment for photostability tests. Integrated cooling of fans consistently compensates for the
Thermostat, Differential thermostat RT
Data sheet Thermostat, Differential thermostat RT n RT thermostat is fitted with a single-pole changeover switch. The position of the contacts depends on the bulb temperature and the set scale value. The
Installation and Operating Instruction
Installation and Operating Instruction Automatic Fire Detectors Series 900 Ex (i) 9893 0.00 GB Technical changes reserved! 0 Installation and Operating Instruction Automatic Fire Detectors Series 900 Ex
TEMPERATURE SENSORS WITH CONNECTION HEAD FOR EXPLOSION ENDANGERED ROOMS 13.3a
DESCRIPTION AND APPLICATION The temperature sensors are designed to meet the requirements of EN 60 079-15:2006 standard. They operate on the base of defi ned relationship between change of sensing element
PolyGard 2-channel Gas Controller MGC-03
PolyGard 2-channel Gas Controller MGC-03 DESCRIPTION Gas measuring and monitoring controller based on state-ofthe-art micro-technology with integrated buzzer for continuous monitoring of the ambient air
y Small dimensions. Easy to install in refrigerated counters or cold rooms
MAKING MODERN LIVING POSSIBLE Data sheet Thermostat Type KP The KP Thermostats are temperaturecontrolled electrical switches. All KP Thermostats have a single pole double throw (SPDT) changeover switch.
Boiler room components 0463EN October 2013
40 90 Boiler room components 0463EN October 2013 Contact regulation thermostat Electrical connections Terminal 1: common input Terminal 2: opens the circuit with the increase in temperature Terminal 3:
Accuracy by Design Products for the HVAC Professional
Accuracy by Design Products for the HVAC Professional Greystone Energy Systems Inc., is one of North America s largest ISO registered manufacturers of HVAC sensors and transducers for Building Automation
OEM Alpha Thermostat direct Analog
OEM Alpha Thermostat direct Analog The OEM Alpha Thermostat direct Analog is a high-quality room thermostat in modern design for the registration and regulation of the desired room temperature, offering
Powers Controls ET 134 Low Temperature Detection Thermostat
Document No. 155-115P25 ET 134-20 Powers Controls ET 134 Low Temperature Detection Thermostat Description Features Product Numbers The Electric Low Temperature Detection Thermostat is a remote bulb instrument
FlowJam Bulk Flow Detection
EN Operating Instructions FlowJam Bulk Flow Detection SWR engineering Messtechnik GmbH CONTENTS Page 1. Function............................................................................. 3 2. Safety..............................................................................
50 - WMS // Straight resistance thermometers with a metal thermowell and a built-in measurement insert
50 - WMS // Straight resistance thermometers with a metal thermowell 50-WMS and a built-in measuring insert The 50-WMS product group comprises ready-to-install large and small straight resistance thermometers
Product data sheet AIRWIN BO-120 Hygrostats
Product data sheet AIRWIN BO-120 The room hygrostat BO-120 is used as two-point controller in climate cabinets, as well as for humidifiers in offices and computer rooms to control the relative humidity.
Modus Model DA General Eastern Low Differential Pressure Alarm Controller
GE Sensing & Inspection Technologies Modus Model DA General Eastern Low Differential Alarm Controller The Modus Model DA is a controller designed for the monitoring of low differential pressures. It combines