VERTICAL WATER RECESSED TERMINAL UNIT

Size: px

Start display at page:

Download "VERTICAL WATER RECESSED TERMINAL UNIT"

Shanon Lambert
5 years ago
Views:

1 ELFOROOM IN 5-15 VERTICAL WATER RECESSED TERMINAL UNIT ELFOROOM IN (ACQUA) Size Cooling Heating [kw] [kw] The ELFO terminal unit is fitted with a motor offering a wide range of speeds, allowing the output of the unit to be modulated according to the room temperature. Indeed, as the room temperature approaches the set point, the fan speed is automatically reduced until stopping when the set point is reached. In this case, the ELFO microprocessor will periodically restart the fan to maintain the temperature conditions in the room and prevent the stratification of the air. This ensures extremely limited noise most of the time that the unit is in operation, as well as guaranteeing excellent stability in the maintenance of the set temperature. In addition, a series of units can be connected to a centralised controller for the management of each individual unit connected. BT06I002GB-01 CERTIFIED QUALITY SYSTEM UNI EN ISO 9001:2008

ELFOROOM: A new way of taking on room terminals The elfo range features a special DC motor with external rotor and built-in electronics for the modulating management of the rotation speed.

This provides the following advantages: Stratification and uniformity of the temperature in the room: the continuous speed modulation of the ELFOROOM guarantees the continuous handling of the air,

The low speed of the air is imperceptible, improving the sense of well-being even compared to traditional radiators Noise.

The controller ensures the continuous adaptation of the speed, with such variations being a fundamental element. Filtration.

2 ELFOROOM: A new way of taking on room terminals The elfo range features a special DC motor with external rotor and built-in electronics for the modulating management of the rotation speed. The temperature is controlled by the continuous adaptation of the fan speed. This provides the following advantages: Stratification and uniformity of the temperature in the room: the continuous speed modulation of the ELFOROOM guarantees the continuous handling of the air, creating a perfectly uniform temperature and preventing the phenomena of stratification. The low speed of the air is imperceptible, improving the sense of well-being even compared to traditional radiators Noise. The continuous operation of the fan allows the appliance to always work at low speeds, and consequently the noise produced is in fact unnoticeable. The controller ensures the continuous adaptation of the speed, with such variations being a fundamental element. Filtration. The continues handling of the air allows constant filtration of the environment. ELFOROOM is fitted with a large filter that guarantees effective filtration. In addition, it can be accessed without requiring tools, allowing the user to perform the systematic cleaning required to ensure the filter maintains its efficiency, with simple soap and water. Consumption. It only uses the energy that is strictly necessary. The exclusive electric fan motor ensures important benefits in terms of power input, % lower than a traditional Fan Coil of the same capacity, meaning significant energy savings. This also allows lower installed power. Design and dimensions. Design and colour carefully selected to allow the ELFOROOM OUT to adapt to different settings. ELFO Room OUT VERSIONS ELFO Room IN ELFO Room UP sizes sizes 5-11 sizes

ELFO CONTROL HOME ELFOSystem, an innovative system by Clivet ensures a perfect climate for total comfort in the home all year round.

ELFOSystem is the result of extensive research and offers a number of benefits, including: TERMINALS GUARANTEED WELLBEING the system controls temperature, humidity and air quality to suit the needs

3 ELFO CONTROL HOME ELFOSystem, an innovative system by Clivet ensures a perfect climate for total comfort in the home all year round. ELFOSystem concentrates heating, cooling, humidity control, air exchange, purification and domestic hot water production in a single, intelligent system. ELFOSystem is the result of extensive research and offers a number of benefits, including: TERMINALS GUARANTEED WELLBEING the system controls temperature, humidity and air quality to suit the needs of every room; INTELLIGENT COMFORT Elfosystem controls every part of the system in the most rational manner to achieve and maintain the best possible energy efficiency for the level of comfort required. ECOLOGY ELFOSystem uses electrical energy generated today and increasingly in the future, from alternative sources as opposed to the fossil fuels that are largely responsible for current global warming. REDUCED DIMENSIONS in hot and cool ELFOsystem are produced by a single unit and spread to a single system; EASY TO INSTALL AND USE every part of the system is designed and tested to ensure quick and easy installation; RELIABILITY all parts of the system are designed to work and interact together. ELFO CONTROL HOME ELFO ENERGY ELFOEnergy is the heart of the system. It is the unit that provides the heating or cooling needed to keep the home comfortable. ELFO ROOM ELFOControl Home is the brand of the system which manages every part of the system to achieve the best possible energy efficiency for the level of comfort required. To make the most of its functions, a system must be simple and intuitive to operate. ELFOControl's touchscreen display makes child's play of all programming operations. Personalised programming allows you to set the required level of comfort room by room as well as set times by hour, day or week. ELFOControl also runs diagnostic tests on all Clivet devices connected on the system. It provides genuine CLIMATE CONTROL by managing all the devices in the system according to outdoor conditions and the comfort level required indoors. Energy management: users can decide whether the system must strictly adhere to the set comfort parameters or can adapt comfort levels in favour of lower energy costs. ELFOControl dialogues with the various parts of the system across a cabled or wireless network. ELFOFRESH RADIANT PANELS ELFORoom is a brand new type of room terminal that applies innovative logic to satisfy the needs of personal comfort. ELFORoom seamlessly blends design and technology to guarantee uniform temperature, constant air filtration and practically noise-free operation. The need to re-circulate the air in the places where we live is a question of hygiene as well as well-being. Re-circulation must occur in controlled conditions so that the air coming from outside is filtered and suited to the desired conditions of temperature and humidity, recovering heat from the expelled air. The temperature of the water delivered to the radiant panels is controlled by a MIXING MODULE that dialogues with ELFOControl. The temperature and humidity of the rooms are measured by HID-T2 (temperature only) or HID-T3 (temperature and humidity) room controllers. OTHER SYSTEM ELEMENTS ELFOControl also controls all the other devices in the system (pumps, zone control valves and radiators) and ensures unfied control over the entire system through ZONE MODULES and INPUT/OUTPUT MODULES. Zone modules are intelligent devices that can be connected to a HID-T2-3 room controller to dialogue with ELFOControl and active, for example, a shut-off valve to stop heat transfer to convection radiator. (A) CONNECTION TO ELFOCONTROL (B) HID-T2 ELECTRONIC AMBIENT CONTROL (B) HID-T3 ELECTRONIC AMBIENT CONTROL (C) HEATING SYSTEM FURNISHING Input/Output modules are devices that are managed directly by ELFOControl to operate zone control valves or circuit pumps. (A) CONNECTION TO ELFOCONTROL P1-P2-P3 SYSTEM PUMPS 3

4 STANDARD UNIT SPECIFICATIONS STRUCTURE Load-bearing structure composed of plastic components (self-extinguishing UL V0) and rigid transversal components in high density (50kg/m3) polystyrene with air extraction profile designed to reduce ventilation noise. PANELLING Plate external panel to guarantee a further structural support AIR EXCHANGER Exchanger coil made from copper pipes and aluminium fins with a large exchange surface Hydraulic pipe connections with air bleed valve FAN Tangential fan located at the exchanger air intake, ensures very silent operation especially at low speed. The speed varies according to the ambient conditions and as well as a reduction in sound levels also ensures energy savings. The connection to the coil is completely insulated by two polystyrene foam shells ACCESSORIES DP - template for positioning pipes GM - outlet grille (optional) GRA1 - Air suction grille with air filter POFT - Telescopic front air discharge plenum POVT - Telescopic vertical air discharge plenum SP1 - RS485 remote communication serial port SPZB - Wireless serial for wireless remote control HID - T2 - HID-T2 electronic ambient control HID - T3 - HID-T3 electronic ambient control CDAS - auxiliary condensate collection tray KD - balancing regulating valves FILTRATION NAN honeycomb mesh air filter made from neutral multiply polypropylene fabric (weighted efficiency A, gravimetric method, 48%). TRAY Extruded PVC tray with insulating air space ELECTRICAL PANEL The electrical panel, including the microprocessor controller, is positioned inside the units, with access through an easy-to-remove panel. CLIVET TALK ROOM electronic (Elfo Control) This is a card for control of the unit which, in addition to basic functions, allows it to be connected to a network of similar units managed centrally by elfo control, which in turn can be connected to a supervisor. This type of electronic card is suited for communicating via RS485 or wireless if connected to SP1 or SPZB devices. The microprocessor control installed in the unit receives operating settings from one of the following devices: HID-T2 - room control for wall installation HID-T3 - room control for wall installation with humidity probe ELFOControl Its functions are: - control of minimum temperature of system water temperature - control of fan speed through proportional signal 0-10v - control of ON-OFF water valve/ electrostatic filter - digital input for remote on/off function or winter/summer - actuator of external air shutter control. The room temperature probe includes the ClivetTalkRoom electronics. CONNECTIONS The unit is supplied complete with shut-off valves, connection pipes to the system with O-Ring for copper tube Ø 16 mm screw fitting and insulated hoses for draining the condensate CONFIGURATION CODE Necessary configuration string for suppling the unit with the indicated elements. ( 1 ) ( 2 ) ( 3 ) ELFOROOM IN M CTR CTR (Std) - - (Std) SP1 SPZB (1) VOLTAGE Supply voltage 230/1/50(230M) standard (2) ELECTRONIC VERSION CLIVET TALK ROOM electronic (Elfo Control)(CTR) standard (3) REMOTE COMMUNICATION SERIAL PORT Remote communication serial port: not required(-) standard RS485 remote communication serial port(sp1) Wireless serial for wireless remote control(spzb) 4

5 GENERAL TECHNICAL SPECIFICATIONS Size COOLING Cooling capacity 1 kw Sensible capacity 1 kw Total power input 1 kw HEATING Heat output 2 kw Total power input 2 kw INTERNAL EXCHANGER Front surface m Water content l Water flow-rate l/s Pressure drop kpa AIR HANDLING SECTION FANS (OUTLET) Type of fans 3 TGZ TGZ TGZ Standard air flow l/s Installed unit power kw CONNECTIONS Water fittings Cu/16mm Cu/16mm Cu/16mm Condensate discharge mm POWER SUPPLY Standard power supply V 230/1/50 230/1/50 230/1/50 DIMENSIONS Length mm Depth mm Height mm STANDARD UNIT WEIGHTS Shipping weight kg (1) Ambient temperature 27 C/19.5 WB water inlet 7 C and outlet 12 C (2) ambient temperature 20 C DB water inlet 70 C and outlet 60 C (3) TGZ=tangential Voltage: 230/1/50 ELECTRICAL DATA Size F.L.A. - FULL LOAD CURRENT AT MAX ADMISSIBLE CONDITIONS F.L.A. - Total A F.L.I. FULL LOAD POWER INPUT AT MAX ADMISSIBLE CONDITION F.L.I. - Total kw SOUND LEVELS FAN SPEED: High speed (H) FAN SPEED: Medium speed (M) Size Sound Power Level (db) Octave band (Hz) Sound pressure level Sound power level db(a) db(a) Size Sound Power Level (db) Octave band (Hz) Sound pressure level Sound power level db(a) db(a) FAN SPEED: Low speed (L) Size Sound Power Level (db) Octave band (Hz) Sound pressure level Sound power level db(a) db(a) Standard Speed (S) the sound levels refer to the unit at full load, in the rated test conditions. The sound pressure level refers to a distance of 1m from the external surface of the units operating in an open field. Medium speed (M) as the air flow is continuous and varies automatically between the maximum and minimum limits, a precise operating point of the unit cannot be defined, therefore the rated sound levels have been measured at medium operating speed (at 70% of the max. air flow). The sound pressure level refers to a distance of 1m from the surface of the units operating in an open field. air flow to 70% 5

6 OPERATING RANGE Size Max water inlet temperature 1 C Max water inlet temperature C Min. water inlet temperature 1 C Min. water inlet temperature C Maximum water side pressure bar Min air inlet temperature C Max. air temperature inlet C Max ambient relative humidity % Min ambient relative humidity % (1)The Clivet Talk electronics uses a water temperature safety probe to monitor inlet water and prevents the fan from starting in cooling mode if the temperature of inlet water is greater than 20 C and in heating mode if the inlet water temperature is less than 30 C. These parameters can be modified by a thermostat. WATER FLOW-RATE IN FUNCTION OF THE COOLING CAPACITY data referred to the following conditions : maximum fan speed kwf = Cooling capacity in kw (P)performance percentages compared to unit nominal power (Q)Water flow-rate P (%) ELFO 5 1,47 kw f 24 C 27 C 30 C Q (l/h) 140 ELFO ELFO C 27 C C C C 30 C P (%) 110 2,83 kw f P (%) 110 3,49 kw f Q (l/h ) Q (l/h ) ELFO 5 WATER FLOW-RATE IN FUNCTION OF THE HEATING CAPACITY data referred to the following conditions : maximum fan speed kwt = heating capacity (kw) (P)performance percentages compared to unit nominal power (Q)Water flow-rate P (%) C 20 C 15 C 140 2,83 kw t Q (l/h ) ,65 kw t ELFO C 20 C 15 C ,96 kw t ELFO C 20 C 15 C P (%) P (%) Q (l/h ) Q (l/h )

7 PERFORMANCE CORRECTION COEFFICIENTS (AIR STANDARD FLOW-RATE ASSUMED AS 1) % % 95% 95% 90% 90% 85% 85% P % % P % % 75% 75% 70% kwf kws 65% 50% 55% 60% 65% 70% 75% % 85% 90% 95% % Q 70% kwt 65% 50% 55% 60% 65% 70% 75% % 85% 90% 95% % Q KWF = COOLING CAPACITY IN KW KWS = SENSIBLE COOLING CAPACITY (KW) KWT = HEATING CAPACITY (KW) (P) PERFORMANCE PERCENTAGES COMPARED TO UNIT NOMINAL POWER (Q) AIR FLOW EXCHANGER PRESSURE DROPS dp (kpa) Q (l/h) DP = PRESSURE DROP Q = WATER FLOW 7

8 COOLING PERFORMANCE Size Ta ( C) DB/WB EXCHANGER WATER INLET TEMPERATURE ( C) 6 / 11 7 / 12 9 / / / 18 kwf kws kwf kws kwf kws kwf kws kwf kws / / / / / / / / / / / / / / / / / / Ta = air intake temperature DB = dry bulb WB = wet bulb kwf = Cooling capacity in kw kws = sensible cooling capacity (kw) difference between inlet / outlet water temperature = 5 C HEATING PERFORMANCE Size Ta ( C) EXCHANGER WATER INLET TEMPERATURE ( C) kwt kwt kwt kwt kwt Ta = air intake temperature kwt = heating capacity (kw) difference between inlet / outlet water temperature = 10 C 8

9 STANDARD UNIT TERMINALS (A)Tangential fan (B)fan motor (C)interception fittings and fittings of hydraulic connection to the system (D)insulation shells and condensate tray in polystyrene (E)Min. temperature safety (F)Air filter (G)Microprocessor control (H)Standard fixing template. (I)template for positioning pipes (L)extruded PVC tray with insulating air space A F H G B L D E C I ACCESSORIES DP - template for positioning pipes Designed to be positioned on site without necessarily installing the unit at the same time. It incorporates the reference position for the water pipes, the reference position of the unit size, the reference points for the positioning plate necessary to fix the unit. Pipe positioning guide plate (supplied with the standard unit, it is also available as an accessory if required before purchasing the unit) (A)template for positioning pipes (1)power input (2)exchanger water inlet (3)exchanger water outlet (4)Condensate discharge A 4 GM - outlet grille (optional) The aluminium grille is composed of a double row of fins (rear directionadjustable) and equipped with rapid connection/disconnection that makes installation and removal easier if required. 9

10 GRA1 - Air suction grille with air filter The pull-down intake grille allows easy access to the unit for inspection and minor repairs. It is equipped with a rapid opening/closing system thanks to a screw insert which can be loosened without tools. (5) 720 (11) 1045 (5) 395 (11) 720 (15) (1) AIR OUTFLOW GRILLE (2) AIR FILTER POFT - Telescopic front air discharge plenum Prearranged to be mounted without srews of the supply air grille POVT - Telescopic vertical air discharge plenum Prearranged to be mounted without srews of the supply air grille 90 / 210 /

SP1 - RS485 remote communication serial port The serial port with MODBUS protocol allows the cable connection between the units and the ELFOControl system, allowing the operation parameters control

modification of the operation parameters Configuration Detail HID-T2 - HID-T2 electronic ambient control The environmental control HID-T2 makes it possible to interface directly with the adjustment

11 SP1 - RS485 remote communication serial port The serial port with MODBUS protocol allows the cable connection between the units and the ELFOControl system, allowing the operation parameters control and modification Configuration Detail SPZB - Wireless serial for wireless remote control Wireless serial allows the radio connection between the units and the supervisor for controlling and modification of the operation parameters Configuration Detail HID-T2 - HID-T2 electronic ambient control The environmental control HID-T2 makes it possible to interface directly with the adjustment module of the units equipped with ClivetTalk Room electronics ( Elfo Control ) and to manage one or more units. The thermostat provides the following functions: -Setting of desired temperature - Selection of the 3 speeds (MIN - MED - MAX) either manually or automatically - On/Off - Summer/winter changeover manually or automatically or remote with digital input - Selection of economic function - Setting of unit operating parameters - Setting of ventilation only mode - Control of external air shutter and possible control of motorized outlet grille - Management of diagnostics with specific code for each type of error Dimensions: 184X82X27 mm The thermostat is connected to the unit via a shielded twisted pair at a maximum distance of 15 m. For connections to the ELFOControl network, refer to the specific sections. HID-T3 - HID-T3 electronic ambient control The environmental control HID-T3 makes it possible to interface directly with the adjustment module of the units equipped with ClivetTalk Room electronics ( Elfo Control ) and to manage one or more units. The thermostat provides the following functions: -Setting of desired temperature - Selection of the 3 speeds (MIN - MED - MAX) either manually or automatically - On/Off - Summer/winter changeover manually or automatically or remote with digital input - Selection of economic function - Setting of unit operating parameters - Setting of ventilation only mode - Control of external air shutter and possible control of motorized outlet grille - Management of humidity probe - Humidity display - Management of diagnostics with specific code for each type of error Dimensions: 184X82X27 mm The thermostat is connected to the unit via a shielded twisted pair at a maximum distance of 15 m. For connections to the ELFOControl network, refer to the specific sections. 11

12 CDAS - auxiliary condensate collection tray Wall mounted only The standard unit is provided with polistirene isolation shell with fixed positions of entry and exit from the wall plant. If such positions were different, it is possible to replace the shells with a gathering auxiliary condensate tray, provided separately. A (A) AUXILIARY CONDENSATE COLLECTION TRAY KD - balancing regulating valves The reducing valve kit, used when the system needs to be balanced, is supplied separately from the unit and is made up of the following components: (A)Balancing regulating valve (B)solder pipe connection (C)elbow (D)screw fitting for copper tube Ø 16 mm (1)exchanger water inlet (2)exchanger water outlet B A C D

13 DIMENSIONAL DRAWING TERMINALS A 55 B C A 182 (1) POWER INPUT (2) EXCHANGER WATER INLET FOR COPPER TUBE Ø 16 MM (3) EXCHANGER WATER OUTLET FOR COPPER TUBE Ø 16 MM (4) DRAIN STUB FOR COPPER TUBE Ø 16 MM Size A mm B mm C mm Length mm Depth mm Height mm Shipping weight kg

14 FUNCTIONAL CLEARANCES S1 (S1) (S2) (m 2 ) ELFO 5 0,03 0,04 ELFO 11 0,05 0,07 ELFO 15 0,07 0,10 S1 30 M = 2000 m = m = m = m = S2 (M)maximum distance (m)minimum distance (S1)free outlet surface (S2)free intake surface CLIVET SPA Feltre (BL) ITALY Tel Fax info@clivet.it CLIVET ESPAÑA S.A. (Madrid) SPAIN Tel Fax info@clivet.es CLIVET UK LTD Fareham (Hampshire) U.K. Tel (0) Fax + 44 (0) info@clivet-uk.co.uk CLIVET NEDERLAND B.V. Amersfoort - Netherlands Tel (0) Fax + 31 (0) info@clivet.nl CLIVET TFA (PVT) LTD Bangalore - INDIA Tel Fax sales@clivettfa.com The data contained in this bulletin is not binding and may be changed by the manufacturer without prior notice. All reproduction, even partial, is prohibited. Copyright - CLIVET S.p.A. - Feltre (BL) - Italy

WATER TO AIR DUCTABLE INDOOR HORIZONTAL HEAT PUMP

EVH R-407C WATER TO AIR DUCTABLE INDOOR HORIZONTAL HEAT PUMP Size Cooling Heating [kw] [kw] 7 2.0 1.9 11 2.6 2.5 15 3.9 3.3 5.2 5.5 25 7.3 6.7 31 8.9 8.4 41 10.7 9.8 REPLACE: BT02E009GB-01 The Versatemp