FAN COIL AIR-CONDITIONING UNITS OF THE HFC SERIES ISO 9001

Transcription

1 FAN COIL AIR-CONDITIONING UNITS OF THE HFC SERIES ISO 9001 catalogue 2004

2 CERTIFICATES Certificate ISO 9001 Product certificate from state testing laboratory Certificate for Slovakia Product certificate from state testing laboratory No. 227 Certificate for Russia according to GOST C.I.C Jan Hrebec

3 Technical conditions 1 C.I.C Jan Hrebec Stefanikova 48, Prague 5 Czech Republic Telephone: Fax: AIR-CONDITIONING UNITS of the HFC series TP JK: Published in November Technical conditions 1. Basic Division 1.1 Sill and under-ceiling Fan-coil HFC units 2. Unit type sizes and their design 2.1 The sill and under-ceiling units of the Fan-coil series (hereinafter referred to as the units ) are manufactured in the following sizes: HFC3 HFC The output characteristics of the units are stated in Appendix Heating and cooling outputs Rated flow air Heating output kw Cooling output kw. 2.3 The dimensions of individual units and their accessories are stated in Appendix Units Dimensions. 2.4 The unit size is derived from the required parameters of the unit (rated air flow, cooling and heating output). 3. Unit application 3.1 The HFC units are designated for heating, cooling, ventilation and air filtration; the purpose is to achieve optimum microclimate of the indoor environment. 3.2 The units may operate as mixing ones (with fresh air supply) or as circulating ones (without fresh air supply). 3.3 Heating water, electricity or steam may be used as heating media. 3.4 Cooling water or coolant may be used as cooling media. 4. Unit description 4.1 The unit consists of a fan driven by electric motor, heat exchanger, filter and the zinc-coated frame with thermal insulation. The unit may also be equipped with an electric board, jacket for installation into the interior and other accessories. Heat exchangers (heaters, coolers) in the unit may be combined according to a code. The unit jacket may consist of a front or front + back jacket. The unit suction may be equipped with different types of grilles and dampers. The units are designated for installation on the wall, under the ceiling or on the floor into the space. 5. Labelling 5.1 Each unit is fitted with a label stating the following data: manufacturer; unit size; 12-digit configuration code; serial number; rated voltage and current; noise data; data related to the medium and exchanger pressure. 11/04 C.I.C Jan Hrebec 1

4 1 Technical conditions 6. Safety 6.1 Upon working on the project, the designer of the air-conditioning system shall elaborate draft operational rules with respect to the expected safety of the air-conditioning system. The draft rules shall include, for example, the following: qualification and professional skills of personnel responsible for operation, service and repair of the electrical equipment; the obligation of the assembling firm or the air-conditioning system operator to carry out the initial inspection of the electrical equipment in accordance with the CSN EN standard Electrical equipment inspection ; the obligation of the air-conditioning system operator to carry out regular inspections of the electrical equipment in the terms according to the CSN EN standard Electrical equipment inspection, depending on the environment; the manner of the safety assurance (i.e. safe disconnecting from the voltage supply) when carrying out the service and/or repairs. 6.2 The wiring shall be executed by a specialized firm in such a way so that it conform to the CSN EN standard Operation of the rotary electrical machines and work with them and related standards, protection against dangerous contact voltage CSN EN Electrical regulations. Electrical equipment, Part 4: Safety. Chapter 41: Protection against electrical injury. 6.3 Upon draining off the exchanger, the water temperature must be below 60 C. 6.4 The connecting pipeline of the heater must be insulated so that its surface temperature is below 60 C. 7. Final inspection and tests 7.1 Each manufactured unit is subject to a final inspection that checks whether the product corresponds with the documentation. 7.2 The conditions after the tests and inspection are recorded in the test protocol. The customer shall be given The product quality and completeness certificate. 8. Sending orders 8.1 The unit shall be ordered on the basis of a configuration code. 9. Handling, storing and packing 9.1 When loading and unloading by means of a fork-lift truck the transported parts must be hoisted by the transport pallet. Careful handling is required. 9.2 During the transport, the units must be sufficiently secured against any movement and overturning. 9.3 The units may be stored only in warehouses of IB type according to the CSN EN standard. 9.4 The units without jacket are packed into contracting foil; the units with jacket are packed into protective cardboard covering. 9.5 It is recommended to remove the protective covering immediately before the assembly. 10. Guarantee 10.1 Within the terms of the guarantee, the manufacturer shall be liable for any defects of the material and components used. The manufacturer shall guarantee the function and properties of the product within the range of the given technical conditions, or any additional conditions if explicitly specified in a contract The standard guarantee period is 12 months after putting into operation, however it may not exceed 18 months after the product leaves the manufacturer. 2 C.I.C Jan Hřebec Hrebec 11/04

5 Codes of the units 2 The code of a unit consists of 12 digits separated by hyphens into three groups of four digits in each. HFC3 40C1 ADF0 Size (1 st 4 th digit) HCF3 the smallest size HCF9 the greatest size 1 st exchanger (5 th digit) 1 one-row fin exchanger Use: water heater, water cooler Maximum operation pressure: 1.6 MPa. 3 three-row fin exchanger Use: water heater, water cooler Maximum operation pressure: 1.6 MPa. 4 four-row fin exchanger Use: water heater, water cooler Maximum operation pressure: 1.6 MPa. R three-row fin exchanger Use: cooler for direct cooling medium evaporation (R407 C) Maximum operation pressure: 2.3 MPa. Note: May be combined with a three-row water heater on the 2nd place. E electric heater Use: independent electric heater (the second exchanger may not be placed) Nominal values: 3 x 400 V, 50 Hz. 2 nd exchanger (6 th digit) 1 one-row fin exchanger Use: water heater, water cooler Maximum operation pressure: 1.6 MPa. E electric heater Use: additional electric heater (either a three-row exchanger or an evaporator will be placed on the 1st position) Nominal values: 3 x 400 V, 50 Hz. Operation mode (7 th digit) H The unit operates only in the heating mode. It is not equipped with troughs for condensate removal. C The unit operates in the cooling mode; or, in combination of heating and cooling. The unit is equipped with either a horizontal or a vertical trough for condensate removal; the position of the trough depends on the unit s orientation. Unit s orientation (8 th digit) The unit s orientation is determined by the position of connecting flanges of exchangers. The electric wiring connection is always on the opposite side. The sill modifications the unit s view from the service side: 1 lef right 11/04 C.I.C Jan Hrebec 3

6 2 Codes of the units The under-ceiling modifications unit s view from the ground plan, in the air flow direction: 1 lef right HFC3 40C1 ADF0 Unit s jacket (9 th digit) 0 unit without jacket A unit with jacket B unit with jacket from both sides Suitable for units independently located in the space, or for units located at glass facade. L Suction modifications (10 th digit) 0 free suction Free space in the length of 100 mm as the minimum must be guaranteed in front of the unit suction. A legs B legs with suction grille in the front Suitable if combined with the A jacket modification. C legs with suction grille both in the front and the back Suitable if combined with the B jacket modification. 4 C.I.C Jan Hrebec 11/04

7 Codes of the units 2 D legs with a damper The unit enables additional suction of fresh air. The direction of fresh air suction from bottom or back sides may be changed by turning the suction branch. An in-wall frame (PZ1) and a rain louver into the exterior façade (PZ0) may be delivered as accessories. HFC3 40C1 ADF0 Size Dimension of fresh air suction HFC x 75 HFC x 75 HFC x 75 HFC x 75 HFC x 75 HFC x 75 HFC x 75 F plastic suction grate The grate is of the same design as the discharge grate on jacket. Suitable for an under-ceiling modification, or for placing on the wall in greater height. G metal sheet suction grate Arrangement of motor speed (11 th digit) All units are equipped with six-speed motors. Three out of the speed options are in all cases pre-set by the manufacturer as Low, Medium, or High depending on the expected output range. Arrangement Low-speed Medium-speed High-speed A B C D E F Not used always 0 (12 th digit) 11/04 C.I.C Jan Hrebec 5

8 3 Dimensions HFC3 HFC4 HFC5 HFC6 HFC7 HFC8 HFC9 B L Without jacket vertical horizontal B+40 B B+50 B With jacket without suction grate L with suction grate L with legs under-ceiling L L C.I.C Jan Hrebec 11/04

9 Dimensions 3 Details of hanging 11/04 C.I.C Jan Hrebec 7

10 4 Technical parameters HFC9 HFC8 HFC7 HFC6 HFC5 HFC4 HFC3 Speed volume Vvz [] Acoustic power level Lw (A) [db] Acoustic pressure level Lp (A) [db] Current I [A] Power input P [W] volume Vvz [] Acoustic power level Lw (A) [db] Acoustic pressure level Lp (A) [db] Current I [A] Power input P [W] volume Vvz [] Acoustic power level Lw (A) [db] Acoustic pressure level Lp (A) [db] Current I [A] Power input P [W] volume Vvz [] Acoustic power level Lw (A) [db] Acoustic pressure level Lp (A) [db] Current I [A] Power input P [W] volume Vvz [] Acoustic power level Lw (A) [db] Acoustic pressure level Lp (A) [db] Current I [A] Power input P [W] volume Vvz [] Acoustic power level Lw (A) [db] Acoustic pressure level Lp (A) [db] Current I [A] Power input P [W] volume Vvz [] Acoustic power level Lw (A) [db] Acoustic pressure level Lp (A) [db] Current I [A] Power input P [W] Exchanger connection Internal thread R 1/2 Row Water volume of HFC exchanger C.I.C Jan Hrebec 11/04

11 Output parameters 5 HFC3 unit One-row heater Three-row heater El. heater Speed volume Q O ,71 42,2 0,83 3,78 68,9 0, ,56 43,8 0,70 3,33 70,9 0, ,43 46,5 0,59 2,86 73,2 0, ,22 47,9 0,44 2,42 75,5 0, ,03 50,8 0,32 1,95 78,1 0, ,89 53,3 0,25 1,62 80,1 0, ,41 38,3 0,59 3,13 60,5 0, ,25 39,1 0,47 2,77 62,2 0, ,11 40,7 0,38 2,38 64,3 0, ,00 42,8 0,31 2,02 66,2 0, ,83 44,7 0,22 1,63 68,5 0, ,72 46,8 0,17 1,35 70,3 0, ,05 33,7 0,35 2,47 52,0 0, ,74 31,3 0,18 2,19 53,5 0, ,70 33,0 0,17 1,89 55,1 0, ,66 35,0 0,11 1,61 56,8 0, ,60 37,8 0,09 1,30 58,7 0, ,55 40,4 0,08 1,08 60,3 0,07 = 20 70/90 60/80 50/70 6/12 Speed volume Three-row cooler Four-row cooler Three-row evaporator Q C ,31 13,6 1,08 1,58 11,4 0, ,90 14,3 0,69 1,39 10,9 0, ,83 13,5 0,63 1,19 10,3 0, ,77 12,4 0,57 0,86 11,3 0, ,67 11,1 0,49 0,75 10,2 0, ,59 10,3 0,42 0,65 9,4 0, ,28 13,8 1,31 1,52 11,8 0, ,13 13,3 1,12 1,34 11,2 0, ,97 13,0 0,92 1,14 10,6 0, ,70 12,7 0,62 0,96 10,4 0, ,62 11,8 0,54 0,69 10,9 0, ,55 11,0 0,47 0,60 10,2 0, ,79 15,9 0,56 1,25 12,9 0, ,88 16,3 0,64 1,10 12,5 0, ,69 14,2 0,48 0,78 13,3 0, ,64 13,6 0,44 0,72 12,6 0, ,56 12,5 0,38 0,63 11,7 0, ,50 11,8 0,33 0,55 11,0 0,19 = 26 7/12 8/14 *) evaporating temperature 5 C 11/04 C.I.C Jan Hrebec 9

12 5 Output parameters HFC4 unit One-row heater Three-row heater El. heater Speed volume Q O ,84 40,6 2,61 6,31 65,8 1, ,62 42,0 2,25 5,62 67,2 1, ,40 43,4 1,92 5,03 69,1 1, ,16 45,2 1,58 4,39 71,3 1, ,90 47,5 1,25 3,70 73,8 0, ,75 49,8 1,07 3,26 75,5 0, ,30 36,7 1,81 5,14 57,3 1, ,12 37,8 1,56 4,64 58,9 1, ,95 39,0 1,34 4,15 60,6 0, ,77 40,7 1,12 3,63 62,4 0, ,54 42,4 0,87 3,07 64,6 0, ,40 43,8 0,73 2,71 66,1 0, ,75 32,7 1,12 4,04 49,3 0, ,66 33,9 1,02 3,71 51,1 0, ,48 34,5 0,82 3,26 51,8 0, ,35 35,8 0,70 2,86 53,4 0, ,17 37,0 0,54 2,42 55,1 0, ,07 38,2 0,46 2,15 56,6 0,29 = 20 70/90 60/80 50/70 6/12 Speed volume Three-row cooler Four-row cooler Three-row evaporator Q C ,31 14,1 4,89 2,77 11,9 2, ,09 13,6 4,09 2,49 11,4 2, ,87 13,0 3,35 2,22 10,9 1, ,64 12,3 1,78 1,92 10,2 1, ,39 11,6 1,45 1,61 9,8 0, ,23 11,1 1,26 1,41 9,5 0, ,23 14,4 6,35 2,65 12,3 3, ,02 13,8 5,32 2,38 11,8 3, ,81 13,3 4,37 2,12 11,3 2, ,59 12,7 3,46 1,84 10,8 1, ,34 12,0 1,71 1,54 10,2 1, ,19 11,5 1,48 1,35 10,0 0, ,83 15,4 3,19 2,22 13,4 1, ,66 14,9 1,73 2,00 12,9 1, ,49 14,5 1,51 1,78 12,4 0, ,30 13,8 1,28 1,54 12,0 0, ,10 13,3 1,05 1,29 11,7 0, ,97 12,8 0,91 1,13 11,5 0,55 = 26 7/12 8/14 *) evaporating temperature 5 C 10 C.I.C Jan Hrebec 11/04

13 Output parameters 5 HFC5 unit One-row heater Three-row heater El. heater Speed volume Q O ,90 40,2 5,54 8,62 64,7 3, ,63 41,4 4,86 7,86 66,4 3, ,40 42,5 4,31 7,26 68,0 2, ,20 43,5 3,86 6,80 70,0 2, ,81 45,8 3,04 5,66 71,9 1, ,65 46,8 2,74 5,25 73,0 1, ,18 36,5 3,90 7,24 57,5 2, ,96 37,5 3,42 6,51 58,4 2, ,77 38,4 3,03 5,99 59,7 2, ,61 39,2 2,72 5,55 60,8 1, ,30 41,1 2,16 4,70 63,1 1, ,17 41,9 1,94 4,37 64,1 1, ,45 32,7 2,48 5,62 49,1 1, ,28 33,4 2,18 5,13 50,3 1, ,14 34,1 1,94 4,73 51,3 1, ,01 34,8 1,73 4,38 52,2 1, ,77 36,2 1,37 3,72 54,1 0, ,67 36,9 1,24 3,46 54,9 0,78 = 20 90/70 80/60 70/50 6/12 Speed volume Three-row cooler Four-row cooler Three-row evaporator Q C ,24 14,2 7,34 3,87 12,0 4, ,97 13,7 6,27 3,52 11,6 4, ,74 13,3 5,42 3,23 11,1 3, ,54 12,9 4,73 2,98 10,8 3, ,16 12,1 3,53 2,50 10,1 2, ,01 11,8 3,10 2,32 9,8 1, ,12 14,5 9,50 3,71 12,5 6, ,86 14,0 8,11 3,37 12,0 5, ,64 13,6 7,02 3,09 11,6 4, ,44 13,2 6,09 2,84 11,2 3, ,08 12,5 4,57 2,39 10,6 2, ,93 12,2 3,99 2,21 10,3 2, ,60 15,5 4,88 3,13 13,5 3, ,38 15,0 4,16 2,85 13,1 2, ,20 14,7 3,61 2,61 12,7 2, ,04 14,3 3,15 2,41 12,4 2, ,73 13,6 2,34 2,02 11,8 1, ,61 13,3 1,38 1,87 11,6 0,97 = 26 7/12 8/14 *) evaporating temperature 5 C 11/04 C.I.C Jan Hrebec 11

14 5 Output parameters HFC6 unit One-row heater Three-row heater El. heater Speed volume Q O ,72 40,8 9,06 10,32 65,5 5, ,40 42,0 7,97 9,43 67,2 4, ,12 43,1 7,07 8,66 68,7 4, ,84 44,3 6,22 7,92 70,2 3, ,39 46,6 4,96 6,73 72,8 2, ,19 47,6 4,44 6,24 73,9 2, ,86 37,0 6,42 8,55 57,7 4, ,60 38,0 5,65 7,92 59,6 3, ,37 38,9 5,02 7,19 60,4 3, ,15 39,9 4,44 6,58 61,7 2, ,77 41,8 3,51 5,60 63,9 1, ,62 42,6 3,18 5,20 64,9 1, ,99 33,2 4,14 6,77 49,9 2, ,79 34,0 3,65 6,19 51,0 2, ,61 34,7 3,24 5,70 52,0 2, ,44 35,5 2,86 5,22 53,1 1, ,19 37,2 2,36 4,46 54,9 1, ,03 37,5 2,05 4,17 56,0 1,17 = 20 90/70 80/60 70/50 6/12 Speed volume Three-row cooler Four-row cooler Three-row evaporator Q C ,93 14,0 11,13 4,66 11,8 8, ,60 13,5 9,50 4,24 11,3 6, ,32 13,0 8,21 3,89 10,9 5, ,05 12,6 7,05 3,54 10,5 4, ,61 11,8 5,32 2,99 9,8 3, ,42 11,5 4,65 2,76 9,6 3, ,77 14,2 14,30 4,45 12,2 10, ,46 13,8 12,25 4,05 11,8 8, ,19 13,3 10,58 3,71 11,4 7, ,92 12,9 9,02 3,38 11,0 6, ,49 12,2 6,77 2,85 10,3 4, ,32 11,9 5,96 2,63 10,1 4, ,17 15,2 7,48 3,78 13,3 5, ,90 14,7 6,37 3,44 12,8 4, ,68 14,4 5,52 3,15 12,5 3, ,46 14,0 4,74 2,87 12,1 3, ,10 13,3 3,56 2,43 11,5 2, ,95 13,0 3,12 2,24 11,4 1,41 = 26 7/12 8/14 *) evaporating temperature 5 C 12 C.I.C Jan Hrebec 11/04

15 Output parameters 5 HFC7 unit One-row heater Three-row heater El. heater Speed volume Q O ,06 38,4 3,28 14,15 63,0 2, ,50 40,0 2,75 12,50 65,4 1, ,29 40,6 2,56 11,90 66,3 1, ,85 42,1 2,19 10,64 68,4 1, ,48 43,4 1,90 9,59 70,1 1, ,13 44,8 1,64 8,62 71,8 0, ,90 34,9 2,29 11,73 55,7 1, ,45 36,2 1,92 10,38 57,7 1, ,29 36,7 1,80 9,88 58,5 1, ,93 37,9 1,54 8,84 60,2 0, ,63 39,0 1,33 7,98 61,7 0, ,40 40,5 1,18 7,18 63,2 0, ,72 31,3 1,43 9,28 48,2 1, ,38 32,3 1,20 8,42 50,6 0, ,25 32,7 1,12 7,84 50,5 0, ,98 33,6 0,96 7,02 51,9 0, ,75 34,4 0,83 6,35 53,2 0, ,60 35,7 0,75 5,71 54,4 0,44 = 20 90/70 80/60 70/50 6/12 Speed volume Three-row cooler Four-row cooler Three-row evaporator Q C ,06 15,0 4,60 6,16 12,8 4, ,50 14,4 3,71 5,42 12,2 3, ,29 14,1 3,40 5,15 11,9 3, ,84 13,5 2,78 4,59 11,4 2, ,49 13,0 2,34 4,13 10,9 2, ,14 12,6 1,93 3,69 10,4 1, ,90 15,2 6,03 5,92 13,2 6, ,35 14,6 4,85 5,20 12,5 4, ,15 14,3 4,45 4,94 12,3 4, ,72 13,8 3,65 4,39 11,8 3, ,37 13,3 3,05 3,95 11,3 2, ,04 12,8 2,53 3,53 10,9 2, ,01 16,2 2,98 4,94 14,2 3, ,56 15,6 2,40 4,35 13,6 2, ,40 15,3 2,21 4,13 13,4 2, ,04 14,8 1,80 3,68 12,9 1, ,75 14,5 1,03 3,30 12,5 1, ,48 14,1 0,90 2,96 12,1 0,89 = 26 7/12 8/14 *) evaporating temperature 5 C 11/04 C.I.C Jan Hrebec 13

16 5 Output parameters HFC8 unit One-row heater Three-row heater El. heater Speed volume Q O ,06 38,6 4,83 16,21 62,7 3, ,41 40,2 4,06 14,32 65,1 2, ,16 40,9 3,78 13,62 66,1 2, ,66 42,3 3,25 12,19 68,1 1, ,24 43,6 2,82 11,12 70,2 1, ,81 45,1 2,42 9,87 71,6 1, ,74 35,1 3,41 13,41 55,3 2, ,21 36,4 2,86 11,86 57,4 1, ,01 37,0 2,67 11,44 58,7 1, ,60 38,1 2,29 10,11 59,9 1, ,26 39,2 1,99 9,16 61,3 1, ,91 40,4 1,71 8,20 62,9 0, ,39 31,6 2,16 10,57 47,9 1, ,98 32,6 1,81 9,36 49,5 1, ,83 33,0 1,69 8,91 50,2 1, ,53 33,9 1,46 8,00 51,5 0, ,26 34,7 1,27 7,25 52,7 0, ,99 35,6 1,09 6,51 54,0 0,62 = 20 90/70 80/60 70/50 6/12 Speed volume Three-row cooler Four-row cooler Three-row evaporator Q C ,94 14,9 6,84 7,19 12,8 6, ,27 14,3 5,50 6,33 12,0 5, ,02 14,0 5,04 6,01 11,8 5, ,52 13,4 4,17 5,36 11,3 4, ,11 12,9 3,51 4,83 10,8 3, ,69 12,4 2,89 4,30 10,3 2, ,74 15,1 8,92 6,91 13,1 8, ,10 14,5 7,20 6,07 12,5 7, ,85 14,2 6,57 5,75 12,2 6, ,35 13,7 5,39 5,13 11,7 5, ,95 13,2 4,53 4,62 11,2 4, ,56 12,7 3,75 4,11 10,8 3, ,75 16,1 4,51 5,80 14,1 4, ,21 15,5 3,63 5,10 13,6 3, ,01 15,2 3,32 4,84 13,3 3, ,60 14,8 2,73 4,31 12,8 2, ,27 14,3 2,30 3,89 12,4 2, ,93 13,9 1,88 3,46 12,0 1,83 = 26 7/12 8/14 *) evaporating temperature 5 C 14 C.I.C Jan Hrebec 11/04

17 Output parameters 5 HFC9 unit One-row heater Three-row heater El. heater Speed volume Q O ,10 38,7 6,85 18,55 62,8 4, ,34 40,3 5,73 16,34 65,3 3, ,07 41,0 5,36 15,58 66,2 3, ,48 42,4 4,58 13,92 68,2 2, ,99 43,8 3,98 12,58 69,9 2, ,51 45,3 3,42 11,41 72,3 1, ,60 35,2 4,85 15,36 55,5 3, ,98 36,6 4,07 13,55 57,5 2, ,76 37,1 3,80 12,92 58,3 2, ,28 38,3 3,25 11,78 60,8 1, ,89 39,4 2,83 10,45 61,5 1, ,49 40,6 2,43 9,39 63,0 1, ,07 31,7 3,11 12,24 48,3 2, ,60 32,7 2,61 10,72 49,7 1, ,43 33,1 2,44 10,23 50,3 1, ,06 34,1 2,09 9,16 51,7 1, ,81 35,1 1,86 8,30 52,9 1, ,46 35,8 1,57 7,46 54,2 0,87 = 20 90/70 80/60 70/50 6/12 Speed volume Three-row cooler Four-row cooler Three-row evaporator Q C ,85 14,9 9,74 8,28 12,7 9, ,07 14,1 7,82 7,26 12,0 7, ,80 13,9 7,20 6,92 11,7 7, ,21 13,4 5,93 6,16 11,2 5, ,73 12,8 4,98 5,54 10,7 4, ,26 12,3 4,12 4,95 10,2 3, ,61 15,1 12,66 7,94 13,1 12, ,86 14,4 10,18 6,96 12,4 9, ,60 14,2 9,38 6,62 12,2 9, ,02 13,6 7,69 5,88 11,6 7, ,54 13,1 6,41 5,29 11,2 6, ,09 12,7 5,31 4,72 10,7 4, ,50 16,0 6,48 6,69 14,1 6, ,87 15,4 5,20 5,87 13,4 5, ,65 15,2 4,78 5,59 13,3 4, ,17 14,7 3,93 4,97 12,7 3, ,78 14,2 3,29 4,47 12,3 3, ,41 13,8 2,73 4,00 11,9 2,62 = 26 7/12 8/14 *) evaporating temperature 5 C 11/04 C.I.C Jan Hrebec 15

18 6 Units Accessories x = unit size which the accessories are designated for HFCx-F05 a reserve set 5 pc of filtration inserts HFCx-F10 a reserve set 10 pc of filtration inserts HFCx-F50 a reserve set 50 pc of filtration inserts HFCx-PPV Elastic insert into pipeline Size Dimension HFC x 184 HFC x 184 HFC x 184 HFC x 184 HFC x 184 HFC x 184 HFC x 184 HFCx-PZ0 Rain louver with frame Size Dimension HFC x 205 HFC x 205 HFC x 205 HFC x 205 HFC x 205 HFC x 205 HFC x 205 HFCx-PZ1 In-wall frame for fresh air damper Size Dimension HFC x 74 HFC x 74 HFC x 74 HFC x 74 HFC x 74 HFC x 74 HFC x 74 HFCx-PZ2 In-wall frame for total cross section Size Dimension HFC x 184 HFC x 184 HFC x 184 HFC x 184 HFC x 184 HFC x 184 HFC x 184 HFCx-PV0 Discharge section with round flanges Size Dimension HFC 3 3 HFC 4 3 HFC 5 3 HFC 6 4 HFC 7 4 HFC 8 4 HFC 9 5 Diameter of connecting flanges: 160 mm. 16 C.I.C Jan Hrebec 11/04

19 REFERENCE LIST INDUSTRIAL ENTERPRISES: SKODA Mlada Boleslav CHEMOPETROL Litvinov Nuclear Power Plant Mochovce Power Plant Melnik SO 124 SLOVNAFT Bratislava SYNTHEZIA Semtin Procter & Gamble Rakovnik SIEMENS Stribro SKODA Plzen ALUKOLA Ostrava TWR Volant Horni Pocernice VARTA Ceska Lipa AUTOPAL Novy Jicin TESLA Roznov pod Radhostem State postage and duty stamp printing house Prague Printing house Kladno TECHNOLEN Lomnice nad Popelkou TABAK Kutna Hora ECKG Kladno MORA Marianske Udoli at Olomouc SROUBARNA Zatec SKLOPLAST Trnava ADAST Blansko CKD Tatra Zlicin LUCAS Autobrzdy FOOD PROCESSING ENRPRISES: RAMA Nelahozeves DANONE Benesov VITANA Bysice PEPSI COLA Prague Slaughterhouse Cesky Brod Meat-processing plant Kvet Pisnice Meat-processing plant Cesky Tesin Poultry-processing plant Libus Poultry-processing plant Klatovy Meat-processing plant Pisek Cooling plant OCEAN Opava Brewery STAROPRAMEN Brewery KRUSOVICE Brewery SVABIN J.V.ROTT, delicatessen, Prague RESTAURANTS: McDonalds Hradec Kralove McDonalds Ceske Budejovice KFC Brno KFC Blanik, Prague KFC Ostrava Restaurant U Zlateho krize, Prague Staromestska restaurant, Prague OFFICE BUILDINGS: Ministry of Industry Government Office, Prague Komercni banka, Kolin Komercni banka, Benesov Czech National Bank, Plzen CESKA SPORITELNA, Prague, FORESBANK, Marianske Lazne CESKY MOBIL, Prague, TELECOM, Hradec Kralove Ostrava Town Hall Police of the CR, Prague Barracks Olomouc SUPERMARKETS: TESCO Prague, Zlicin ALBERT Prague, Zlaty Andel ALBERT Olomouc ALBERT Hradec Kralove ALBERT Brno BILLA Kolin BILLA Ricany at Prague OBI Prague, Prosek OBI Plzen SPORT CENTRES, SW BOWLING OLYMPIA Brno Lawn-tennis club Prague Stvanice Athletic stadium Ostrava Vitkovice Athletic hall Cesky Brod Swimming-pool, Frenstat pod Radhostem Swimming-pool, Trutnov Private swimming-pool, Prague School swimming-pool, Armenska street, Brno HOSPITAL, CLEAN PREMISES: Motol Clinic, Prague Thomayer Clinic, Prague General Clinic, Prague Clinic, Hradec Kralove Clinic, Plzen Fifejdy Hospital, Ostrava Hospital, Kolin Hospital Louny operating theatres Hospital, Novy Bydzov Hospital Benesov Hospital Rokycany Intensive Care Centre Town Hospital Caslav Vinohrady Clinic, Prague INTERPHARMA Prague, Modrany BIOPHARM Chotoun LONZA Kourim Medica Zvolen OTHERS: Czech Television, Kavci Hory, Prague Radio Free Europe, Prague Transmission tower, Ostrava Hostalkovice State Opera House, Prague Theatre Pardubice Cabaret ATMOSFERA Prague Hotel Alcron Hotel Holiday Inn Hotel Prosper Frydek-Mistek Cinema Multiplex GALAXIE Cinema KOTVA Ceske Budejovice Sauna Arkhangelsk (Russia) John Huss Chapel, Plzen Castle chapel Spilberk, Brno Castle Lysa nad Labem Prison Jirice Rifle-range Holesov Archive house Olomouc Archive house Pribram Airport Prague Kbely CSA Ostrava Airport Airport Pardubice Petrol station TOTAL Chomutov Petrol station SHELL C.I.C Jan Hrebec

20 ADDRESSES AND CONTACTS CZ/SK HEAD OFFICE: C.I.C. Jan Hrebec s.r.o. Stefanikova Prague 5 Czech Republic Phone: Fax: info@cic.cz http: LOCAL DEALER: C.I.C Jan Hrebec design/print: