Product Description. Options. Fan Voltage. Electrical Connections Technical Data - Key Characteristics

Transcription

1 Cirrus 25/1 The Cirrus 25/1 range of fan heaters uses PTC ceramic heating technology to provide the user with a product ideally suited to climate control. The heater can be controlled independently to the fan, allowing a fan-only mode for air circulation. There are nine variants, giving different power and supply voltage capability. The product has been designed, and approved, for build-in applications. It has a robust construction utilising two anodised aluminium extrusions, coupled to a 25mm fan. The heating element is a DBK PTC heater. For ease of installation the product can be supplied with a factory fitted 35mm DIN-rail mounting clip, and electrical connection is via colour coded stripped-end wires. To enable the use of different supply voltages to the fan nominal, Smartcan is employed within the harness on certain units. DBK Part No Power Output (@ 10ºC) Heater Voltage Fan Voltage FGC R 5W 12V AC/DC 12V DC FGC R 10W 12V AC/DC 12V DC FGC R 20W 12V AC/DC 12V DC FGC R 5W 12V AC/DC 12V AC* FGC R 10W 12V AC/DC 12V AC* FGC R 20W 12V AC/DC 12V AC* FGC R 5W 24V AC/DC 24V AC/DC* FGC R 10W 24V AC/DC 24V AC/DC* FGC R 20W 24V AC/DC 24V AC/DC* * Use Smartcan FGF 01 25mm wire finger guard Factory fitted at outlet only Nominal 10º C 5W 10W 20W Typical max in-rush current (A) 12V AC Typical max in-rush current (A) 24V AC Fan life time - 40ºC(Hrs) 120, , ,000 Fan Operating temperature range (ºC) -10 to to to +70 Nominal input voltage Dimensions (mm) - cross section 26x27 26x27 26x27 Length (mm) Weight (g) Finger guards at outlet Optional Optional Optional

2 Cirrus 25/2 The Cirrus 25/2 range of fan heaters uses PTC ceramic heating technology to provide the user with a product ideally suited to climate control. The heater can be controlled independently to the fan, allowing a fan-only mode for air circulation. There are eighteen variants, giving different power and supply voltage capability. The product has been designed, and approved, for build-in applications. It has a robust construction utilising two anodised aluminium extrusions, coupled to a 25mm fan. The heating element is a DBK PTC heater. For ease of installation the product can be supplied with a factory fitted 35mm DIN-rail mounting clip, and electrical connection is via colour coded stripped-end wires. To enable the use of different supply voltages to the fan nominal, Smartcan is employed within the harness on certain units. DBK Part No Power Output (@ 10ºC) Heater Voltage Fan Voltage FGC R 20W 12V AC/DC 12V DC FGC R 30W 12V AC/DC 12V DC FGC R 40W 12V AC/DC 12V DC FGC R 20W 115/ 12V DC FGC R 30W 115/ 12V DC FGC R 40W 115/ 12V DC FGC R 20W 12V AC/DC 12V AC* FGC R 30W 12V AC/DC 12V AC* FGC R 40W 12V AC/DC 12V AC* FGC R 20W 115/ 12V AC* FGC R 30W 115/ 12V AC* FGC R 40W 115/ 12V AC* FGC R 10W 24V AC/DC 24V AC/DC* FGC R 30W 24V AC/DC 24V AC/DC* FGC R 40W 24V AC/DC 24V AC/DC* FGC R 20W 115/ 24V AC/DC* FGC R 30W 115/ 24V AC/DC* FGC R 40W 115/ 24V AC/DC* * Use Smartcan FGF 01 25mm wire finger guard Factory fitted at outlet only Nominal 10º C 10W 20W 30W 40W V AC V - 0.5/2.5 1/3.5 1/ / Fan life time - 40ºC(Hrs) 120, , , ,000 Fan Operating temperature range (ºC) -10 to to to to +70 Nominal input voltage (Fan) Nominal input voltage (Heater) 12AC/DC or 12AC/DC or 12AC/DC or 24AC/ 115/230 or 115/230 DC or 115/230 Dimensions (mm) - cross section 26x27 26x27 26x27 26x27 Length (mm) Weight (g) Finger guards at outlet (High Voltage N/A Yes Yes Yes Finger guards at outlet (Low Voltage Optional Optional Optional Optional

3 Cirrus 40/1 DBK Part No Power Output 10ºC) Heater Voltage Fan Voltage FGC R 50W 12V AC/DC 12V DC FGC R 60W 12V AC/DC 12V DC FGC R 50W 115/ 12V DC FGC R 60W 115/ 12V DC FGC R 80W 115/ 12V DC FGC R 100W 115/ 12V DC FGC R 50W 12V AC/DC 12V AC* FGC R 60W 12V AC/DC 12V AC* FGC R 50W 115/ 12V AC* FGC R 60W 115/ 12V AC* FGC R 80W 115/ 12V AC* FGC R 100W 115/ 12V AC* FGC R 50W 24V AC/DC 24V AC/DC* FGC R 60W 24V AC/DC 24V AC/DC* FGC R 50W 115/ 24V AC/DC* FGC R 60W 115/ 24V AC/DC* FGC R 80W 115/ 24V AC/DC* FGC R 100W 115/ 24V AC/DC* * Use Smartcan FGF 01 40mm wire finger guard Factory fitted at outlet only. Optional at inlet. FGF 08 Plastic 40mm finger guard Optional FGF 05 Plastic 40mm finger guard and filter assembly Optional The Cirrus 40/1 range of fan heaters uses PTC ceramic heating technology to provide the user with a product ideally suited to climate control. The heater can be controlled independently to the fan, allowing a fan-only mode for air circulation. There are eighteen variants, giving different power and supply voltage capability. The product has been designed, and approved, for build-in applications. It has a robust construction utilising two anodised aluminium extrusions, coupled to a 40mm fan. The heating element is a DBK PTC heater. For ease of installation the product can be supplied with a factory fitted 35mm DIN-rail mounting clip, and electrical connection is via colour coded stripped-end wires. To enable the use of different supply voltages to the fan nominal, Smartcan is employed within the harness on certain units. Nominal 10º C 50W 60W 80W 12V 24V 115/ /6 1.5/5 2/ / Fan life time - 40ºC(Hrs) 120, , , ,000 Fan Operating temperature range (ºC) Nominal input voltage (Fan) Nominal input voltage (Heater) -10 to to to to AC/DC or 24AC/ DC or 115/230 12AC/DC or 24AC/ DC or 115/ / /230 Dimensions (mm) - cross section 42x42 42x42 42x42 42x42 Length (mm) 72/77 72/ Weight (g) Finger guards at outlet (High Voltage Yes Yes Yes Yes Finger guards at outlet (Low Voltage Optional Optional N/A N/A

4 Cirrus 40/2 DBK Part No Power Output 10ºC) Heater Voltage Fan Voltage FGC R 125W 115/ 12V DC FGC R 150W 115/ 12V DC FGC R 200W 115/ 12V DC FGC R 230W 115/ 12V DC FGC R 230W 115/ 24V DC FGC R 125W 115/ 12V AC* FGC R 150W 115/ 12V AC* FGC R 200W 115/ 12V AC* FGC R 230W 115/ 12V AC* FGC R 125W 115/ 24V AC/DC* FGC R 150W 115/ 24V AC/DC* FGC R 200W 115/ 24V AC/DC* FGC R 230W 115/ 24V AC/DC* FGC R 275W 115/ 12V DC FGC R 275W 115/ 12V AC* FGC R 275W 115/ 24V DC FGC R 275W 115/ 24V AC/DC* * Use Smartcan The Cirrus 40/2 range of fan heaters uses PTC ceramic heating technology to provide the user with a product ideally suited to climate control. The heater can be controlled independently to the fan, allowing a fan-only mode for air circulation. There are seventeen variants, giving different power and supply voltage capability. The product has been designed, and approved, for build-in applications. It has a robust construction utilising two anodised aluminium extrusions, coupled to a 40mm fan. The heating element is a DBK PTC heater. For ease of installation the product can be supplied with a factory fitted 35mm DIN-rail mounting clip, and electrical connection is via colour coded stripped-end wires. To enable the use of different supply voltages to the fan nominal, Smartcan is employed within the harness on certain units. FGF 01 40mm wire finger guard Factory fitted at outlet only. Optional at inlet. FGF 08 Plastic 40mm finger guard Optional FGF 05 Plastic 40mm finger guard and filter assembly Optional Nominal 10º C 125W 150W 200W 230W 275W (CE Marked only) Typical max in-rush current (A) Fan life time - 40ºC(Hrs) 120, , ,000 50,000 50,000 Fan Operating temperature -10 to to to to to +60 range (ºC) Nominal input voltage (Fan) 12DC, 12AC or 12DC, 12AC or Nominal input voltage (Heater) 115/ / / / /230 Dimensions (mm) - cross 42x42 42x42 42x42 42x42 42x42 section Length (mm) Weight (g) Finger guards at outlet Yes Yes Yes Yes Yes

5 Cirrus 60 The Cirrus 60 range of fan heaters comprises forced air enclosure heaters that use PTC ceramic heating technology. They can also be used in a fan-only mode (no heat) providing the user flexibility of use applications. There are two primary variants, giving different power and supply voltage capability. are capable of running both heater and fan from mains voltage whilst maintaining the high airflow and power performance normally seen only using a DC fan. Each option has a user selectable power output for no heat, 200W, 300W or full power output at 400W. The product has been designed, and approved, for built-in applications. It has a robust construction utilising high temperature plastic mouldings, coupled to a 60mm fan. VDE The heating element is a DBK Al finned PTC air heater. For ease of installation the product can be supplied with a factory fitted 35mm DIN-rail mounting clip or either two bracketmount options, and electrical connection via flying leads. DBK Part No Power Output (@ 10ºC) Supply Voltage FGC /300/200W Heater & Fan FGC /300/200W Heater & Fan FGB mm DIN clip EN50022 Factory fitted FGB 301 Side mount bracket Factory fitted FGB 302 Bulkhead bracket Factory fitted Nominal 10º C 400W 300W 200W Typical peak in-rush current (A) RMS 10 8 Typical peak in-rush current (A) RMS Maximum body temperature (40ºC Ambient) Electrical protection class II II II Ingress protection IP20 IP20 IP20 Operating temperature range (ºC) -10 to to to +70 Storage temperature range (ºC) -40 to to to +70 at 50Hz (230V AC) at 60Hz (115V AC) Fan life time - 40ºC(Hrs) 49,000 49,000 49,000 Nominal input voltage (depending on variant) Dimensions (mm) cross section length 71x x x Harness length (mm) Weight (g) - add 35g for bracket Finger guards at inlet and outlet Yes Yes Yes

6 Cirrus 80 The Cirrus 80 range of fan heaters comprises forced air enclosure heaters that use PTC ceramic heating technology. They can also be used in a fan-only mode (no heat) providing the user flexibility of use applications. There are four variants, giving different power and supply voltage capability. (Each has a user selectable power output for no heat, half heat or full heat output.) The product has been designed, and approved, for built-in applications. It has a robust construction utilising an anodised aluminium extrusion and a high temperature plastic moulding, coupled to an 80mm fan. VDE The heating element is a DBK Al finned PTC air heater. All products in this range have a built-in electrically re-settable safety thermostat to protect the product in the event of fan failure. For ease of installation the product can be supplied with a factory fitted 35mm DIN-rail mounting clip, electrical connection is via an easily accessible connector block. DBK Part No Power Output (@ 10ºC) Supply Voltage FGC /600W 115V FGC /800W 115V FGC /600W 230V FGC /800W 230V FGB mm DIN clip Factory fitted FGF PPI Filter assembly Approx 10% power output reduction Nominal 10º C 300/600W 450/800W Typical max in-rush current Typical max in-rush current Maximum at body temperature (ºC) Operating temperature range (ºC) -40 to to Fan life time - 40ºC(Hrs) Nominal input voltage V AC 115 or 115 or Dimensions (mm) cross section length 82x x Weight (g) Finger guards at inlet and outlet Yes Yes