Λευκωσία, 11 Οκτωβρίου ΠΡΟΣ: Όλα τα Μέλη. Κυρία/ε,

Transcription

1 Λευκωσία, 11 Οκτωβρίου 2018 ΠΡΟΣ: Όλα τα Μέλη Κυρία/ε, Σας επισυνάπτoυμε γνωστοποιήσεις από Εθνικούς Οργανισμούς Τυποποίησης, μελών των Ευρωπαϊκών Οργανισμών Τυποποίησης CEN/CENELEC, που περιέχουν τους τίτλους προτεινόμενων εθνικών προτύπων. Σύμφωνα με την Ευρωπαϊκή Οδηγία που αφορά την πληροφόρηση σε θέματα τεχνικών προτύπων, μπορείτε, αφού μελετήσετε τους τίτλους: α) να ζητήσετε όπως λάβετε ηλεκτρονικά ολόκληρο το κείμενο του προσχεδίου εθνικού προτύπου, εάν αυτό είναι διαθέσιμο, β) να συμμετάσχετε στις συναντήσεις της τεχνικής επιτροπής του Εθνικού Οργανισμού Τυποποίησης που ετοιμάζει το προσχέδιο προτύπου και γ) να υποβάλετε εισήγηση στον CYS, να αρχίσει τυποποιητική εργασία σε Ευρωπαϊκό επίπεδο σχετικά με το θέμα της γνωστοποίησης, εάν φυσικά πιστεύετε ότι το εν λόγω εθνικό πρότυπο θα επηρεάσει την ελεύθερη διακίνηση προϊόντων ή την κυπριακή βιομηχανία και οικονομία. Τυχόν σχόλια και παρατηρήσεις παρακαλώ όπως υποβάλλονται στον Κυπριακό Οργανισμό Τυποποίησης. Σε περίπτωση που δε λάβουμε καμία ανταπόκριση, ο CYS δε θα φέρει ένσταση στην προώθηση των υπό αναφορά εθνικών προτύπων. Για περισσότερες πληροφορίες μπορείτε να επικοινωνείτε με την κα. Μαριλένα Νικολάου, Λειτουργό Διοίκησης και Διεθνών Σχέσεων του Κυπριακού Οργανισμού Τυποποίησης (CYS), τηλ: , Φαξ και στην ηλεκτρονική διεύθυνση: Με εκτίμηση, Ανδρέας Ανδρέου, Διευθυντής Βιομηχανίας, για Γενικό Γραμματέα. /ΜΚ. Γρίβα Διγενή 38 & Δεληγιώργη 3, 1066, Τ.Θ , 1509 Λευκωσία, Κύπρος, Τηλ , Φαξ , meropi@ccci.org.cy, Ιστοσελίδα:

2 Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from to Register issued on : A list of subsectors can be found at the end of this document.

3 Information procedure Page 2 Monthly Notifications Register Notifications registered at CCMC from to Sector A : SERVICES Register issued on :

4 Subsector A11: SAFETY AND SECURITY Page 3 Subsector : A11 Registration Date : BSI United Kingdom ID : /0001 National Ref : BS 7858 Screening of individuals working in a secure environment. Code of practice Subsector : A11 Registration Date : TSE Turkey ID : t / , National Ref : Competent services Rules for paper cutting machinery This standard includes rules for operating, structural feature, technical equipment, personnel specifications and certification of competent services of paper cutting machinery of (paper slitting machine, paper roll cutting machine, paper roll cutting machine etc.) Subsector : A11 Registration Date : TSE Turkey ID : t / , National Ref : Private services - Medical devices - Rules This standard includes rules for management, structural features, technical equipment, personnel specifications and certification of special services for medical devices Subsector : A11 Registration Date : TSE Turkey ID : tst11075/ National Ref : Work places - Giving purchase and sale services of automobiles - General rules This standard includes the general rules for structural characteristics, management and personnel characteristics of giving automobile purchase and sale services.

5 Page 4 Subsector : A11 Registration Date : TSE Turkey ID : tst13805/ National Ref : Work places- Rules for test centers of road vehicles This standard includes rules for structural characteristics, operating, personal and technical equipment providing test centers of road vechicles Subsector A99: UNDETERMINED Subsector : A99 Registration Date : UNI Italy ID : / National Ref : UNI Audio, Video, Lighting and Controls integration services - Requirements for design, installation, configuration, calibration, programming and tecnical verification This standard specifies requirements for design, installation, configuration, calibration, programming and technical verification of integration services for audio, video, lighting and control systems. These solutions are addressed to a number of field: hospitality, residential, education, shopping malls, congress halls, public and private buildings, museums, theatres, places of worship, marine, public transport. Subsector : A99 Registration Date : UNI Italy ID : / National Ref : UNI Non-regulated professions - System Integrator Audio Video Lights and Controls (AVLC) - Knowledge,skillandcompetencerequirements This standard specifies the requirements concerning the professional activity of the System Integrator, or rather of the professional who who designs, installs, configures, programs and verifiestheintegrationofprofessionalaudiovideolightsandcontrols(avlc)systems. These requirements are specified, starting from specific identified tasks and acitivities, in terms of knowledge, skills and competence, in accordance with the European Qualifications

6 Framework, EQF and they are stated in order to facilitate learning output evaluation and validationprocesses. Page 5 Subsector : A99 Registration Date : IPQ Draft Issue Date : Portugal Latest Date for Comments : ID : C /0001 Draft for public enquiry , National Ref : prnp 4563 Ethics of organizations management system. Requirements This Standard establishes the requirements for principles and methodologies for the implementation and maintenance of the organization's ethics management system, following a phased and structured process with the involvement of its internal and external stakeholders, initiated and upheld by the top management. Each organization, whether in the private or public sector, whether or not for profit, is encouraged to strengthen its value and reputation by applying this Standard. This Standard is not intended to define the values to be adopted by organizations, whose essence emerges from the organization's beliefs and management, nor provide specific mechanisms or instruments of the organization's ethics management system. By verifying compliance with the requirements of this Standard, the organization may require the certification of the organization's ethics management system, namely the elaboration and implementation of the code of ethics, the framing of ethics in the organization's strategy, in the planning of its activities in the short, medium and long term, in decision making and promotion at all levels of practices and behaviors appropriate to the ethical principles of the organization, as well as the assessment of the effectiveness of its management system for the purposes defined. Any declaration of compliance with this Standard may only concern the design and implementation of the organization's ethics management system. ** End of Sector **

7 Information procedure Page 6 Monthly Notifications Register Notifications registered at CCMC from to Sector B : BUILDING AND CONSTRUCTION Register issued on :

8 Subsector B01: FIRE PROTECTION Page 7 Subsector : B01 Registration Date : ASI Austria ID : / , National Ref : ÖNORM F 1020/A First aid salvage device for fire fighting purposes - Requirements, testing, maintenance - Aditional requirements to ÖNORM EN 1498 and ÖNORM EN (Amendment) This ÖNORM deals with a first aid salvage device in which a rescue sheet (abseil sheet) and a sling are packed in a carrying case. For this devices, requirements for materials, specifications regarding the design and condition, provisions for testing and marking as well as provisions for the device holder are specified. In addition to the provisions of ÖNORM EN 1498 and ÖNORM EN , this ÖNORM specifies additional requirements and designs for a first aid salvage device for use by fire and rescue services. Subsector : B01 Registration Date : ASI Austria ID : / , National Ref : ÖNORM F 4030/A Fire service belts - Requirements and marking - Additional requirements to ÖNORM EN 358 (Amendment) This ÖNORM contains requirements for firefighter belts with carabines fastened directly to the belt with carabine ring according to ÖNORM EN 362 or a lanyard according to ÖNORM EN 354. It applies together with ÖNORM EN 358 and specifies their requirements, considering fire fighter specific emergency characteristics. Subsector : B01 Registration Date : ASI Austria ID : / , National Ref : ÖNORM F 4040/A Rescue harness for fire-brigade employment - Requirements and testing - Additional requirements to ÖNORM EN 361 (Amendment) This ÖNORM contains requirements for materials, design and condition of rescue harness for fire-brigade employment as well as provisions for their testing and marking. Fire brigade harnesses conforming to this ÖNORM are used by the fire brigades as a fall arrest and restraint harness, as a rescue harness, for roping and abseiling of persons, as well as for use in air service. In addition to the requirements of ÖNORM EN 361, a rescue harness for firebrigade has to fulfill the requirements of ÖNORM EN 358 and ÖNORM EN 813 as well as ÖNORM EN 1497.

9 Page 8 Subsector : B01 Registration Date : ID : /0001 National Ref : PR NF S /A3 Fire Safety Systems (FSS) - Installation rules for the fire protection system Subsector : B01 Registration Date : ID : /0001 National Ref : PR NF S Fire fighting hose assemblies - Assembling requirements for hoses and couplings and tests Subsector : B01 Registration Date : ID : /0001 National Ref : PR NF S Fire-fighting hoses - Flexible delivery hoses of diameters Subsector : B01 Registration Date : BSI Draft Issue Date : United Kingdom Latest Date for Comments : ID : /0001 Draft for public enquiry National Ref : PD PD Application of fire safety engineering principles to the design of buildings. Part 2. Spread of smoke and toxic gases within and beyond the enclosure of origin (Subsystem 2)

10 Page 9 Subsector : B01 Registration Date : BSI Draft Issue Date : United Kingdom Latest Date for Comments : ID : /0001 Draft for public enquiry National Ref : PD PD Application of fire safety engineering principles to the design of buildings. Part 1. Initiation and development of fire within the enclosure of origin (Sub-system 1) Subsector : B01 Registration Date : BSI Draft Issue Date : United Kingdom Latest Date for Comments : ID : /0001 Draft for public enquiry National Ref : PD PD Application of fire safety engineering principles to the design of buildings. Part 3. Structural response and fire spread beyond the enclosure of origin Subsector : B01 Registration Date : BSI Draft Issue Date : United Kingdom Latest Date for Comments : ID : /0001 Draft for public enquiry National Ref : PD PD The application of fire safety principles to fire safety design of buildings. Part 6. Human factors. Life safety strategies. Occupant evacuation, behaviour and condition (Sub-system 6) Subsector : B01 Registration Date : BSI Draft Issue Date : United Kingdom Latest Date for Comments : ID : /0001 Draft for public enquiry National Ref : PD PD Application of fire safety engineering principles to the design of buildings. Part 7. Probabilistic risk assessment

11 Page 10 Subsector : B01 Registration Date : BSI United Kingdom ID : /0001 National Ref : BS 8627 Fireandrescueserviceequipment.Ultrahighpressurefirefightingequipment. Specification Subsector B02: STRUCTURES Subsector : B02 Registration Date : ID : /0001 National Ref : NF P Floors coverings - Classification of locations according to their slip resistance Subsector B04: CEMENT Subsector : B04 Registration Date : ID : /0001 National Ref : PR NF DTU 27.2 P2 Building works - Coverings from blown-out by wet-sprayed products - Part 2 : Contract bill of special administrative model clausesbuilding Subsector : B04 Registration Date : ID : /0001

12 National Ref : PR NF DTU 27.2 P1-2 Building works - Coverings from blown-out by wet-sprayed products - Part 1-2 : General criteria for selection of materialsbuilding Page 11 Subsector : B04 Registration Date : ID : /0001 National Ref : PR NF DTU 27.2 P1-1 Building works - Coverings from blown-out by wet-sprayed products. - Part 1-1 : Contract bill of technical model clausesbuilding Subsector : B04 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE-EN 16908/1M Cement and building lime - Environmental product declarations - Product category rules complementary to EN National annex The aim of the document is to provide an National annex that clarify the application of the standard in the context of the Spanish Structural Code Subsector B06: GYPSUM Subsector : B06 Registration Date : ID : /0001 National Ref : PR NF DTU P1-2 Building works - Gypsum plasterboards works - Part 1-2 : General criteria for selection of materials Subsector : B06 Registration Date :

13 Page 12 ID : /0001 National Ref : PR NF DTU P1-1 Building works - Gypsum plasterboards works - Part 1-1 : Contract bill of technical model clauses Subsector B11: METAL STRUCTURES Subsector : B11 Registration Date : BSI United Kingdom ID : /0001 National Ref : PD :2009+A Structural use of aluminium. Recommendations for the design of aluminium structures to BS EN 1999 Subsector B14: GEOTECHNICS Subsector : B14 Registration Date : ASI Austria ID : / National Ref : ÖNORM EN ISO /A Geotechnical investigation and testing - Identification and classification of soil - Part 1: Identification and description (ISO :2017) The present National Annex defines the identification and description of soil which are relevant in Austria. Subsector : B14 Registration Date : ASI Austria ID : / National Ref : ÖNORM EN ISO /A Geotechnical investigation and testing - Identification and classification of soil - Part 2: Principles for a classification (ISO :2017)

14 Page 13 The present National Annex defines classification of soil which are relevant in Austria. Subsector B18: SCAFFOLDING Subsector : B18 Registration Date : UNMZ Czech Republic ID : /0001 Draft for public enquiry National Ref : Scaffoldings - Common regulations Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT Subsector : B25 Registration Date : BSI Draft Issue Date : United Kingdom Latest Date for Comments : ID : /0001 Draft for public enquiry National Ref : BS 5864 Installation and maintenance of gas-fired ducted air heaters of rated heat input not exceeding 70 kw net (2nd and 3rd family gases). Specification Subsector B26: ROAD BUILDING AND MAINTENANCE Subsector : B26 Registration Date : ID : /0001 National Ref : PR NF P Roadways and ancillaries - Rules for distance between buried (utilities) networks and rules for proximity between networks and plants

15 Subsector B27: WATERPROOFING MATERIALS Page 14 Subsector : B27 Registration Date : ASI Austria ID : / National Ref : ÖNORM B 3664 Flexible sheets for waterproofing - Synthetic damp proof sheets including synthetic basement tanking sheet - National implementation of ÖNORM EN This ÖNORM serves for implementation of the ÖNROM EN It determines in clause 5 the technical minimum-requirements for "Synthetic damp proof sheets including synthetic basement tanking sheets " in regarding to the in principal usability in Austria. The specific requirements on Synthetic sheets, which are used in Austria, are in clause 6. Subsector B29: AGGREGATES Subsector : B29 Registration Date : UNE Spain Latest Date for Comments : ID : P /0002 Draft for public enquiry National Ref : PNE Determination of clay lumps and crumbly particles in aggregate for the making of mortars and concretes. This standard specifies a test method for the determination (approximately) of the lump clay in the aggregates used for making mortars and concrete by means of the sense of touch and theeyesight. REV/AMD UNE 7133:1958 Subsector : B29 Registration Date : UNE Spain Latest Date for Comments : ID : P /0002 Draft for public enquiry National Ref : PNE Aggregates for concrete. Determination of the coefficient of friability of the sands This standard specifies the procedure for the determination of the friability coefficient of sands. It is applied to sand and gravel sand fraction, of natural, recycled and artificial origin used in the manufacture of concrete in for construction and civil engineering REV/AMD UNE 83115:1989 EX

16 Page 15 Subsector : B29 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Aggregates. Designation. The aim and scope of this standard is to define the procedure for the identification (designation) of the aggregates use in the different applications. REV/AMD UNE :2008 Subsector : B29 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Stability of aggregates and rock fragments against both collapse in water action and humidity-dryness cycle action. The aim of this standard is to describe the appropriate test methods for determining the stability of aggregates and rock fragments against both collapse in water action and humidity-dryness cycle action. REV/AMD UNE :2008, UNE :2008 Subsector : B29 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Determination of content, maximum size and thick aggregate granulometric modulus in fresh concrete. The aim of this standard is to describe the appropriate test methods for determining the content, maximum characteristic size and granulometric modulus of coarse aggregate in fresh concrete. REV/AMD UNE 7295:1976 Subsector : B29 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry

17 Page 16 National Ref : PNE Test for aggregates. Determination of the potential reactivity of aggregates. Chemical method. Determination of the reactivity alkali-silica and alkali-silicate. This test method is intended to determine the potential reactivity (alkali-silica, alkali-silicate and alkali-carbonate) of aggregates, through chemical evaluation of silica and sodium concentrations in NaOH solution at elevated temperature REV/AMD UNE :1999 EX Subsector : B29 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Test for aggregates. Determination of the potential reactivity of aggregates. Chemical method. Determination of the alkali-carbonate reactivity. This test method is intended to determine the potential reactivity alkali-carbonate) of aggregates, through chemical evaluation. REV/AMD UNE :1999 EX Subsector : B29 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Test for aggregates. Determination of the alkali-silica and alkali-silicate potential reactivity of aggregates. Accelerated mortar bar test. This method is intended to determine the potential alkali-silica reactivity of aggregates through the evaluation of the expansion of mortar bars immersed in NaOH solution at elevated temperature. REV/AMD UNE :1999 EX Subsector : B29 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Determination of the potential reactivity of aggregates. Concrete prisms method. This test method is intended to determine the potential reactivity (alkali-silica, alkali-silicate and alkali-carbonate) of aggregates, through the measurement of expansion of concrete prisms under warm and humid conditions.

18 Page 17 REV/AMD UNE :1999 EX Subsector B30: FLOOR AND SURFACING Subsector : B30 Registration Date : ID : /0001 National Ref : PR NF DTU 57.1 P2 Raised access floor (free access) - Constituent components - Execution - Part 2 : Contract bill of special administrative model clausesbuilding Subsector : B30 Registration Date : ID : /0001 National Ref : PR NF DTU 57.1 P1-2 Raised access floor (free access) - Constituent components - Execution - Part 1-2 : General criteria for selection of materialsbuilding Subsector : B30 Registration Date : ID : /0001 National Ref : PR NF DTU 57.1 P1-1 Planchers surélevés (à libre accès) - Éléments constitutifs - Exécution - Part 1-1 : Contract bill of technical model clausesbuilding Subsector B31: HEATING SYSTEMS IN BUILDINGS Subsector : B31 Registration Date : ASI Austria ID : /0001

19 National Ref : ÖNORM H Checking of heating systems - Part 5: Heat distribution and heat output The present Austrian Standard serves as technical basis for energetic assessment and the checking of function of the heat distribution and heat output system of a heating system. Page 18 Subsector : B31 Registration Date : ASI Austria ID : / National Ref : ÖNORM H Checking of heating systems - Part 6: Technical safety inspection of heating systems The present Austrian Standard serves as basis for conducting a safety inspection of heating systems. Subsector : B31 Registration Date : ASI Austria ID : / National Ref : ÖNORM H Checking of heating systems - Part 1: General requirements This Austrian Standard enables the checking and evaluation of the energy efficiency and the emission performance of a heating system. This checking does not replace safety-related checkings,customerserviceorinspectionworksandtypetests. The Austrian Standard includes a section for general requirements as well as a section for requirementsoninspectionstaff. The classification of the Standard series ÖNORM H 7510 was changed from M to H to be in accordance with the covered subject "heating systems". Subsector : B31 Registration Date : ASI Austria ID : / National Ref : ÖNORM H

20 Checking of heating systems - Part 2: Heat supply with burning - Simple check Page 19 The present Austrian Standard serves as basis for the basic verification of firing systems and combustion engines. It shall be applied to systems fired with liquid and gaseous fuels as well as solid fuels. The verification described in this ÖNORM shall be used to determinate the correct function of the waste gas losses as well as emissions of carbon monoxide and, in addition, to determinate the smoke soot number for liquid fuels. Subsector : B31 Registration Date : ASI Austria ID : / National Ref : ÖNORM H Checking of heating systems - Part 3: Heat supply with burning - Comprehensive check The ÖNORM at hand serves as basis for the extensive verification of firing systems. It ist o be used for heating systems that are operated with liquid, gaseous and solid fuels. The verification described in this ÖNORM shall be used to determinate the correct function of the waste gas losses as well as emissions of carbon monoxide and, in addition, to determinate the smoke soot number for liquid fuels. Subsector : B31 Registration Date : ASI Austria ID : / National Ref : ÖNORM H Checking of heating systems - Part 4: Heat provision without combustion The present Austrian Standard serves as technical basis for energetic assessment of installations for heat provision without combustion, such as heat pumps, thermal solar systems, transfer stations, etc. The requirements for simple inspection of firing systems for solid, liquid and gaseous fuels are given in ÖNORM H Subsector B99: UNDETERMINED Subsector : B99 Registration Date : ASI Austria ID : / National Ref : ÖNORM B 2224

21 Execution of horizontal components - Contract to provide services Page 20 This Austrian Standard includes procedural and contractual provisions for the execution of ofhorizontalcomponents. Exceptions are underground works in accordance with ÖNORM B 2203 (all parts), special civil engineering works according to ÖNORM B Subsector : B99 Registration Date : ASI Austria ID : / National Ref : ÖNORM A Exchange of data concerning service description, tender, offer, works contract and final settlement in electronic form - Part 2: Consideration of the planning method Building Information Modeling (BIM) Level 3 This Austrian Standard regulates the development of data which is exchanged automatically between all stakeholders, such as LB editors, EC-Publisher, designers, clients, bidders or contractors in tender phases, contracting and billing (AVA). The following areas are covered: service description, element catalogue, specifications, accounting. Subsector : B99 Registration Date : ASI Austria ID : / , National Ref : ÖNORM L 1111 Garden design and landscaping - Technical planning and execution This ÖNORM describes the technical planning and execution of garden design and landscaping works. Subsector : B99 Registration Date : UNMS SR Slovakia ID : / National Ref : STN Design of urban roads The objective of the task is to remove inconsistency with the Directive 2014/94/EU. REV/AMD STN

22 Page 21 Subsector : B99 Registration Date : SNV Draft Issue Date : Switzerland Latest Date for Comments : ID : CH180009/0001 Draft for public enquiry National Ref : prsia 282 Liquid applied seals - product and building material testing, performance resistance REV/AMD SIA 282:2011 Subsector : B99 Registration Date : ISM Moldova, Republic of Latest Date for Comments : ID : MD000352/0001 Draft for public enquiry National Ref : SM 352 Architectural finishing products of limestone rocks. Technical conditions This standard refers to architectural finishing products of limestone rocks, obtained by cutting stones and blocks of limestone Subsector : B99 Registration Date : SN Norway ID : NOT18013/ National Ref : NS 3514 Method for moisture-proof building process This document sets out a method / framework for moisture proof building process in the execution phase of buildings. The method defines control areas that are to be included in the project control plans. The framework establishes a minimum level of moisture safety. Subsector : B99 Registration Date : SN Norway ID : NOT18014/ National Ref : NS 3515 Repair for water and moisture damage in or on building The standard applies to repairs of water and moisture damage in/on buildings. The standard

23 applies from ordering of assignments to the complete reconstruction / reset of affected building components. Page 22 ** End of Sector **

24 Information procedure Page 23 Monthly Notifications Register Notifications registered at CCMC from to Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS Register issued on :

25 Subsector C01: Food products Page 24 Subsector : C01 Registration Date : ID : /0001 National Ref : PR NF T Animal and vegetable fats and oils - Determination of composition of the sterol fraction - Method by gas chromatography REV/AMD NF T Subsector : C01 Registration Date : ID : /0001 National Ref : PR NF T Animal and vegetable fats and oils. Determination of the low cholesterol content REV/AMD NF T Subsector : C01 Registration Date : ID : /0001 National Ref : PR NF V Cheese - Determination of fat content - Acido-butyrometric method Subsector : C01 Registration Date : ID : /0001 National Ref : NF V Transformed fishes - Canned mackerels - Specifications Subsector : C01 Registration Date :

26 Page 25 DIN Germany ID : /0001 National Ref : Food hygiene - Work wear in food business Subsector C03: CHEMISTRY Subsector : C03 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Cosmetic raw materials. Hexamethyldisiloxane. Purity determination by gas chromatography. This standard aims to set a test method for the quantification of the purity of hexamethyldisiloxane for use in cosmetics. REV/AMD UNE 84726:2006 Subsector : C03 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Cosmetic raw materials. Polydimethylcyclosiloxanes. Purity determination by gas chromatography. This standard aims to set a test method for the quantification of the purity of polydimethylcyclosiloxanes1foruseincosmetics. 1) A polydimethylsiloxane is a polymer of dimethylated siloxane units. REV/AMD UNE 84683:2005 Subsector C04: LABORATORY GLASSWARE Subsector : C04 Registration Date : DIN Germany ID : /0001

27 Page National Ref : DIN Laboratory taps - Outlet nozzles Subsector C06: ESSENTIAL OILS Subsector : C06 Registration Date : ID : /0001 National Ref : NF T Essential oils - Oil of roman chamomille (Chamaemelum nobile (L.) all. syn. Anthemis nobilis L.) Subsector : C06 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Cosmetic raw materials. Sunscreens. Isopentyl-4-methoxycinnamate. This standard defines the physico-chemical characteristics required to isopentyl-4- methoxycinnamate for use in cosmetic REV/AMD UNE 84699:2007 Subsector C11: TOBACCO Subsector : C11 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Tobacco and tobacco products. Preparation and constitution of samples as similar as posible from the same lot for collaborative studies for the evaluation of the tobacco test methods. This standard specifies a practical system for dividing tobacco and tobacco products batches (not necessarily homogeneous) both, within a single laboratory or between different laboratories,forsubsequentchemicaltobaccoanalysis.

28 Page 27 The main objective is the procurement of similar samples as far as possible for carrying out collaborativeanalysis. Note: This system does not intend that the obtained samples be representative of the sampled population, but that they are similar as much as possible, so that they are useful for comparing the results in collaborative analysis. REV/AMD UNE :2012 Subsector C18: ADHESIVES Subsector : C18 Registration Date : ID : /0001 National Ref : PR NF T Adhésifs structuraux - Méthode de préparation de plaques d'adhésifs structuraux pour la réalisation d'éprouvettes d'essai de caractérisation Subsector : C18 Registration Date : ID : /0001 National Ref : PR-NF-T Adhésifs - à l'eau - Aminoplastes - Détermination conventionnelle du temps de prise en gel à différentes températures Subsector : C18 Registration Date : DIN Germany ID : /0001 National Ref : Bonded wood joints - Terms and definitions

29 Subsector C99: UNDETERMINED Page 28 Subsector : C99 Registration Date : ID : /0001 National Ref : PR NF T Energetic materials for defense - Safety, vulnerability - 75 mm diameter gap test Subsector : C99 Registration Date : MSZT Hungary ID : / , National Ref : MSZ Weat for animal feeding stuffs REV/AMD MSZ 12541:1973 Subsector : C99 (Secondary Subsector) MSZT Hungary ID : / , National Ref : MSZ Weat for animal feeding stuffs Registration Date : REV/AMD MSZ 12541:1973 ** End of Sector **

30 Information procedure Page 29 Monthly Notifications Register Notifications registered at CCMC from to Sector F : FUNDAMENTAL STANDARDS Register issued on :

31 Subsector F01: TECHNICAL DRAWINGS Page 30 Subsector : F01 Registration Date : BSI United Kingdom ID : /0001 National Ref : BS Sanitary installations. Part 3: Code of practice for the selection, installation and maintenanceof sanitary and associated appliances Subsector F05: MEASURING INSTRUMENTS Subsector : F05 Registration Date : ID : /0001 National Ref : PR NF E Geometrical Product Specifications (GPS)? Dimensional measuring equipments? Part 2: Internal micrometer with tow spindles - Acceptance and reverification Subsector : F05 Registration Date : ID : /0001 National Ref : PR NF E Geometrical Product Specifications (GPS)? Dimensional measuring equipments? Part 1: Internal micrometer with tow spindles - Metrological and design characteristics Subsector F12: INFORMATION PROCESSING SYSTEMS Subsector : F12 Registration Date : ASRO Romania ID : /0001 National Ref : SR 4316:2018

32 Plates for hydrometric rods Page 31 Plates for hydrometric rods required to read the level of surface water (rivers, rivers, lakes and seas) and water levels in hydrotechnical installations and constructions REV/AMD STAS Subsector : F12 Registration Date : ID : /0001 National Ref : PR NF P Road traffic signal control by trafic ligths - Standard controller dialogue specification - Diaser Subsector : F12 Registration Date : ID : /0001 National Ref : PR NF P Road information : elaboration, storage, spreading - Inductive loop sensors - definitions, characteristics and implementation REV/AMD P Subsector : F12 Registration Date : ASRO Romania ID : /0001 National Ref : STAS /A91:2018 Earth measurements. Wooden topographical rods Wooden topographical rods, rigid or folding, used for the performance of the III, IV and technical geometry leveling, trigonometric leveling and indirect distance measurement REV/AMD STAS Subsector : F12 Registration Date : ASRO Romania ID : 3371/2-9/0001

33 Page 32 National Ref : STAS 3371/2-90/A91:2018 Terrestrial surveyings. Metallic pegs Metallic pegs used for terrestrial surveyings REV/AMD STAS 3371/2-90 Subsector F16: GRAPHICAL SYMBOLS Subsector : F16 Registration Date : UNE Spain Latest Date for Comments : ID : P /0002 Draft for public enquiry National Ref : PNE Fire safety. Safety signs. Part 1: Signals and beacons for fire protection systems and equipment. This standard includes the safety signs used in fire safety. REV/AMD UNE :1981 Subsector F19: OPTICS Subsector : F19 Registration Date : DIN Germany ID : /0001 National Ref : Production in optical engineering - Indexing of hydraulic expansion chucks Subsector F20: QUALITY ASSURANCE Subsector : F20 Registration Date : BSI United Kingdom ID : /0001 National Ref : BS Biodiversity net gain. Part 1: design and pre-construction. Specification

34 Page 33 Subsector : F20 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Management systems for criminal compliance. Requirements for bodies providing audit and certification of management systems of criminal compliance in accordance with UNE Standard This standard establishes the requirements that, in addition to those described in ISO / IEC , must be met by certification bodies that certify criminal compliance management systemsinaccordancewiththerequirementsofunestandard19601(hereinaftersgcp). All the sections of the ISO / IEC : 2015 Standard continue to be applicable, not replacing this document with any of the requirements of the standard, but complementing it. Subsector F23: ENERGY Subsector : F23 Registration Date : NSAI Draft Issue Date : Ireland Latest Date for Comments : ID : NSAI1041/0001 Draft for public enquiry , National Ref : S.R. 54:2014+prA1:201X Code of practice for the energy efficient retrofit of dwellings to include ventilation in attics 1. A new paragraph Attic ventilation assessment is being introduced into SR 54 to provide the approach to ventilation in attics based on an assessment of the existing condition of the attic. 2. A new Annex I provides a method for surveying attics to assess if there is a condensation risk and whether existing ventilation is adequate. REV/AMD S.R. 54:2014 ** End of Sector **

35 Information procedure Page 34 Monthly Notifications Register Notifications registered at CCMC from to Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE Register issued on :

36 Subsector H01: CINEMATOGRAPHY Page 35 Subsector : H01 Registration Date : DIN Germany ID : /0001 National Ref : Image and sound production in film and video studios and radio stations - Principles and provisions for a work station Subsector H04: SPORTS EQUIPMENT Subsector : H04 Registration Date : ASI Austria ID : / , National Ref : ÖNORM M 6228 Structural requirements for pool facilities and and small bath ponds This ÖNORM specifies structural requirements for pool installations and small bath ponds. For example, entrances in swimming pools, jetties, grouting materials, pool linings, etc. Subsector H99: UNDETERMINED Subsector : H99 Registration Date : DIN Germany ID : /0001 National Ref : Garden tools - Non-motorized hand-held tools for using in soil - Spades Subsector : H99 Registration Date : DIN Germany ID : / National Ref : DIN

37 Equipment for commercial kitchens - Thermal equipment - Part 3: Bainmaries; Requirements and testing Page 36 ** End of Sector **

38 Information procedure Page 37 Monthly Notifications Register Notifications registered at CCMC from to Sector I : MECHANICAL ENGINEERING Register issued on :

39 Subsector I02: FASTENERS Page 38 Subsector : I02 Registration Date : ID : /0001 National Ref : PR NF E Bolted joints - Part 1: Stainless steel fasteners - Test methods for torque/clamp force and tightening capability Subsector I05: IRON PIPES Subsector : I05 Registration Date : DIN Germany ID : /0001 National Ref : Diaphragm-weld packings and weld ring seals for flange connections Subsector I09: SMALL TOOLS Subsector : I09 Registration Date : ID : /0001 National Ref : PR NF E Press-tools - Precompressed assemblies for medium rate - General specifications Subsector : I09 Registration Date : ID : /0001 National Ref : PR NF E Tools for pressing - Ball guides - Ball cage

40 Page 39 Subsector I14: GEARS Subsector : I14 Registration Date : NBN Belgium ID : BE664068/ National Ref : prnbn E Gears - Calculation of Tooth Flank Fracture Load Capacity Subsector I17: MACHINERY IN GENERAL (INCLUDING SAFETY) Subsector : I17 Registration Date : DIN Germany ID : /0001 National Ref : Calculation of load capacity of cylindrical worm gear pairs with rectangular crossing axes Subsector I18: MINING Subsector : I18 Registration Date : ISS Serbia Latest Date for Comments : ID : /0001 Draft for public enquiry National Ref : SRPS B.A4.060 Geological designations and symbols - Geological-volcanological designations This Standard specifies the Geological-volcanological designations for: boundaries of eruptive areas, volcanic fields and volcanic structures. Subsector : I18 Registration Date :

41 Page 40 ISS Serbia Latest Date for Comments : ID : /0001 Draft for public enquiry National Ref : SRPS B.A4.064 Geological designations and symbols - Designations for geological curiosities and archaeological localities This Standard specifies the designations for geological curiosities and archaeological localities Subsector I19: NUCLEAR ENERGY Subsector : I19 Registration Date : ASI Austria ID : / , National Ref : ÖNORM S Dose calibrators - Part 2: Constancy testing This ÖNORM specifies the requirements for constancy testing of dose calibrators on place of use. The scope of this ÖNORM is to define simple procedures for constancy testing which can be carried out with simple utilities/resources by the operator. Subsector I30: AIR DISTRIBUTION Subsector : I30 Registration Date : ISS Serbia Latest Date for Comments : ID : /0001 Draft for public enquiry National Ref : SRPS B.Z2.100 Flexible tubes for ventilation - Technical requirements This Standard specifies the technical requirements for the design and delivery of flexible ventilation tubes for special ventilation in all mines with underground Subsector I99: UNDETERMINED Subsector : I99 Registration Date :

42 Page 41 ISS Serbia Latest Date for Comments : ID : /0001 Draft for public enquiry National Ref : SRPS.H.D4.055 Hunting ammunition Primer cups for ammunition for shotguns This standard determines the components, requirements and quality control primer cups for ammunition for shotguns ** End of Sector **

43 Information procedure Page 42 Monthly Notifications Register Notifications registered at CCMC from to Sector M : METALLIC MATERIALS Register issued on :

44 Subsector M01: STEEL Page 43 Subsector : M01 Registration Date : ID : /0001 National Ref : PR NF A Unpackaged steels? Metallic coated flat steel products intended for contact with foodstuffs? Part 2: Aluminium coated or aluminium-silicium alloy coated (non stainless) steels Subsector : M01 Registration Date : ID : /0001 National Ref : PR NF A Chemical analysis of steel and cast iron. Spectrophotometric determination of manganese Subsector : M01 Registration Date : ID : /0001 National Ref : PR NF A Unpackaged steels - Flat steel products intended for contact with Foodstuffs - Uncoated (and non stairless) steels Subsector : M01 Registration Date : ID : /0001 National Ref : PR NF A Unpackaged steels - Metallic coated fiat steel products intended for contact with foodstuffs - Part 1: Zinc or zinc alloy coated (non-stainless) steels

45 Subsector : M01 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Iron and steel industry. Environmental product declarations. Product category rules for steel products for concrete and steel structures. Part 1: Hot rolled non-alloy steel long products from electric furnace This standard establishes the Product Category Rules for hot-rolled non-alloy steel long products from electric furnace for the development of Type III Environmental Product Declarations for in accordance with UNE-EN Page 44 Subsector : M01 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Iron and steel industry. Environmental product declarations. Product category rules for steel products for concrete and steel structures. Part 2: Processed products and prestressing system applicators This standard establishes the Product Category Rules for processed products and prestressing system applicators for the development of Type III Environmental Product Declarations in accordance with UNE-EN Subsector : M01 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Steel products. Hot rolled IPN sections. Dimensions and masses. This standard specifies the nominal dimensions and masses of the hot rolled taper flange I sections (IPN) for structural use, including stainless steels. It also specifies the static and inertia characteristics. REV/AMD UNE 36521:1996 Subsector : M01 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public

46 enquiry National Ref : PNE Steel products. Hot rolled UPN sections. Dimensions and masses. This standard specifies the nominal dimensions and masses of the hot rolled UPN sections for structural use, including stainless steels. It also specifies the static and inertia characteristics. REV/AMD UNE 36522:2001 Page 45 Subsector : M01 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Steel products. Hot rolled UPE sections. Dimensions and masses. This standard specifies the nominal dimensions and masses of the hot rolled UPE sections for structural use, including stainless steels. It also specifies the static and inertia characteristics. REV/AMD UNE 36523:2008, UNE 36523:2008 ERRATUM:2011 Subsector : M01 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Steel products. Hot rolled HE sections. Dimensions and masses. This standard specifies the nominal dimensions and masses of the hot rolled HE sections for structural use, including stainless steels. It also specifies the static and inertia characteristics. REV/AMD UNE 36524:1994, UNE 36524:1999 ERRATUM Subsector : M01 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Steel products. Hot rolled U sections. Dimensions and masses. This standard specifies the nominal dimensions and masses of the hot rolled U sections for structural use, including stainless steels. It also specifies the static and inertia characteristics. REV/AMD UNE 36525:2001

47 Page 46 Subsector : M01 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Steel products. Hot rolled IPE sections. Dimensions and masses. This standard specifies the nominal dimensions and masses of the hot rolled IPE sections for structural use, including stainless steels. It also specifies the static and inertia characteristics. REV/AMD UNE 36526:1994 Subsector M15: METALLIC CORROSION Subsector : M15 Registration Date : DIN Germany ID : /0001 National Ref : External corrosion protection of buried pipes - Part 2: corrosion protection systems for steel pipes Subsector M16: MECHANICAL TESTS FOR METALS Subsector : M16 Registration Date : DIN Germany ID : /0001 National Ref : Testing of metallic materials - Flat bending fatigue test ** End of Sector **

48 Information procedure Page 47 Monthly Notifications Register Notifications registered at CCMC from to Sector N : NON-METALLIC MATERIALS Register issued on :

49 Subsector N02: SOLID FUELS Page 48 Subsector : N02 Registration Date : UNI Italy ID : / , National Ref : UNI Solid biofuels - Guidelines for the determination of the quality by near infrared spectrometry The present document gives guidelines for the determination by near infrared spectroscopy of some properties of solid biofuels for energy use. The parameters that may be determined are quantitative, such as moisture content, ash content and gross calorific value, and qualitative when they relate to specific characteristics of the raw material. Subsector : N02 Registration Date : DIN Germany ID : /0001 National Ref : Testing of solid fuels - Determination of sulfur content - Part 1: Total sulfur Subsector N03: PETROLEUM PRODUCTS Subsector : N03 Registration Date : UNI Italy ID : / , National Ref : UNI Qualification of economic operators involved in the production chain of biofuels and bioliquids This standard defines a qualification scheme for organizations, here deined as "economic operators", involved in the production chain of biofuels, bioliquids and their intermediates and by-products produced in a sustainable way according with criteria defined by art. 17 of Directive 2009/28/EC (RED) and art. 1.6 of Directive 2009/30 (FQD) that adds art. 7ter "sustainability requirements for biofuels" into directive 98/70.The standard gives also requirements for the implementation of a traceability system that allows an organization to comply with the requirements of both the directives. This standard is applicable to a single organization and not for the qualification of the complete chain of custody. It is intended to be used within qualification schemes needed to verify the conformity to criteria defined by art. 18 of the RED. In order to make easier its application, it has to be considered as an integration, for all the aspects linked to the sustainability of products defined by the RED, of

50 Page 49 existing qualification schemes for management systems (e.g. EN ISO 9001) if already adopted by the organizations. This standard does not define specific sustainability values or calculation methods, but requires that both values and methodologies, however defined, are managed by the organization in order to assure the conformity to the RED and FQD principles and to guarantee traceability and clearness. REV/AMD UNI/TS 11441:2016;UNI/TS 11429:2011 Subsector N05: TEXTILES Subsector : N05 Registration Date : ID : /0001 National Ref : NF G Textiles - Luminous textiles based on optical fibres - Determination of the irradiance and luminance of luminous fabrics Subsector : N05 Registration Date : ID : /0001 National Ref : Pr NF G Clothing-clothing accessories-coloured buttons-. Test on the resistance of the colouring to dry cleaning. Subsector N07: SAWN TIMBER Subsector : N07 Registration Date : ID : /0001 National Ref : PR NF B Reusable wooden drums for conductors and cables

51 Page 50 Subsector : N07 Registration Date : BSI United Kingdom ID : /0001 National Ref : BS External Timber Cladding. Part 2: Code of Practice for Design and Installation Subsector : N07 Registration Date : BSI United Kingdom ID : /0001 National Ref : BS :20014+A1 External Timber Cladding. Part 1: Method of specifying. Amendment Subsector N09: PLASTICS Subsector : N09 Registration Date : ID : /0001 National Ref : PR NF T Plastics - Sheets - Determination of dimensional variations after heating (immersion method) Subsector : N09 Registration Date : ID : /0001 National Ref : PR NF T Plastics -Sheets - Determination of dimensional variations after heating - Immersion method

52 ** End of Sector ** Page 51

53 Information procedure Page 52 Monthly Notifications Register Notifications registered at CCMC from to Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT Register issued on :

54 Subsector S01: ACOUSTICS AND SOUND INSULATION Page 53 Subsector : S01 Registration Date : ID : /0001 National Ref : PR NF S Acoustics - Requirements for sound pressure limiters, recorders and display units intended to be used during activities involving amplified sound - Part 2 : implementation Subsector : S01 Registration Date : BSI United Kingdom ID : /0001 National Ref : BS 4142:2014+A1 Methodsforratingandassessingindustrialandcommercialsound. Amendment Subsector S04: PROTECTIVE CLOTHING AND EQUIPMENT Subsector : S04 Registration Date : BSI United Kingdom ID : /0001 National Ref : BS 7928:2013+A Specification for head protectors for cricketers. Amendment Subsector S08: AIR QUALITY Subsector : S08 Registration Date : ASI Austria ID : / , National Ref : ÖNORM M 9421 Handling of emission measurements below the limit of quantification

55 Page 54 This ÖNORM specifies how analysis values below the determination / detection limit, for the assessment of limit values for several components and for the calculation of emission loads, are to be used. Subsector S09: WATER QUALITY AND WATER SUPPLY Subsector : S09 Registration Date : ASI Austria ID : / , National Ref : ÖNORM B 5022 Requirements for the microbiological water quality in aerosol cleaning systems This ÖNORM specifies requirements for the microbiological / hygienic quality of water in aerosol-forming cleaning plants. Subsector : S09 Registration Date : ASI Austria ID : / , National Ref : ÖNORM B 5019/A Hygienic aspects of the planning, construction, operation, surveillance and rehabilitation of central heating installations for drinking water (Amendment) This ÖNORM describes measures for the avoidance of legionella growth and for the prevention of infections by heated drinking water. The points relevant for hygiene by planning, implementation, operation, supervision and reconstruction of central drinking water heating installations and distribution systems are described. The implementation in this ÖNORM is valid in particular for sick person's institutions and health resort institutions, nursing facilities, bath facilities, accommodation operations, communal facilities, public buildings and dwelling house equipments. Subsector : S09 Registration Date : ID : /0001 National Ref : PR NF T Water quality - Sampling of fish using electricity within the framework of monitoring networks for stocking of fish in connection with the quality of rivers

56 Page 55 Subsector : S09 Registration Date : ID : /0001 National Ref : PR NF T Water quality - Determination of the Macrophytes biological index for Rivers (IBMR) Subsector : S09 Registration Date : ID : /0001 National Ref : PR NF T Water quality - Determination of the Macrophytes biological index for Rivers (IBMR) Subsector : S09 Registration Date : BSI United Kingdom ID : /0001 National Ref : BS 7903 Guide to selection and use of gully tops and manhole covers for installation within the highway Subsector : S09 Registration Date : DIN Germany ID : / National Ref : DIN German standard methods for the examination of water, waste water and sludge - Anions (group D) - Part 52: Photometric Determination of dissolved chromium(vi) in water (D 52)

57 Page 56 Subsector S15: SURGICAL INSTRUMENTS Subsector : S15 Registration Date : DIN Germany ID : /0001 National Ref : Medical instruments - Part 1: Scissors type Mayo, without carbide inserts Subsector : S15 Registration Date : DIN Germany ID : /0001 National Ref : Medical instruments - Abdominal spatulas, malleable Subsector : S15 Registration Date : DIN Germany ID : /0001 National Ref : Medical instruments - Elevators Langenbeck's Subsector : S15 Registration Date : DIN Germany ID : /0001 National Ref : Medical instruments - Elevators Williger

58 Page 57 Subsector : S15 Registration Date : DIN Germany ID : /0001 National Ref : Medical instruments - Directors Subsector S17: RESPIRATORY PROTECTIVE DEVICES Subsector : S17 Registration Date : ID : /0001 National Ref : S Respiratory protective devices Subsector S18: STERILIZATION OF EQUIPMENT Subsector : S18 Registration Date : DIN Germany ID : / National Ref : DIN Sterilization - Steam sterilizers for pharmaceutical products - Part 6: Operation; Text in German and English Subsector S24: SOIL QUALITY Subsector : S24 Registration Date : ID : /0001 National Ref : PR NF X

59 «Qualité du sol - Prestations de services relatives aux sites et sols pollués - Partie 5 : Exigences dans le domaine des prestations d'études, d'assistance et de contrôle» Page 58 ** End of Sector **

60 Information procedure Page 59 Monthly Notifications Register Notifications registered at CCMC from to Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING Register issued on :

61 Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES Page 60 Subsector : T01 Registration Date : DIN Germany ID : /0001 National Ref : Welding sockets for pipes Subsector : T01 Registration Date : DIN Germany ID : /0001 National Ref : Sockets for screwed ends with metric fine thread and Whitworth pipe thread Subsector : T01 Registration Date : DIN Germany ID : /0001 National Ref : Hexagon head screw plugs - With retaining pin and bleeding hole Subsector : T01 Registration Date : DIN Germany ID : /0001 National Ref : Ships and marine technology - Loose flanges and welding necks extra light duty - Part 1: Loose flanges DN 32 to DN 50, PN up to 25, DN 65 to DN 125, PN up to 10 Subsector : T01 Registration Date :

62 DIN Germany Page 61 ID : /0001 National Ref : Ships and marine technology - Loose flanges and welding necks extra light duty - Part 2: Welding necks made of CuNi10Fe1,6Mn, DN 32 to DN 50, PN up to 25, DN 65 to DN 125, PN up to 10 Subsector T02: AEROSPACE Subsector : T02 Registration Date : ID : /0001 National Ref : PR NF L Aerospace series Rubber materials - Classification Uses Subsector : T02 Registration Date : ID : /0001 National Ref : 2951 Aerospace series Metallic materials Test method Micrographic determination of content of non-metallic inclusions Subsector : T02 Registration Date : ID : /0001 National Ref : 2510 Aerospace series - Aluminium alloy T42 - Drawn tubes for structural applications

63 Page 62 Subsector : T02 Registration Date : ID : /0001 National Ref : 2699 Aerospace series Aluminium alloy (5086) Annealed and straightened (H111) Drawn bar 6 mm = D = 50 mm Subsector : T02 Registration Date : ID : /0001 National Ref : 3001 Aerospace series Tempered float glass plies for aircraft applications Technical specification Subsector : T02 Registration Date : ID : /0001 National Ref : 2960 Aerospace series Heat resisting nickel base alloy (Ni-P101HT) Cold worked and solution treated Bar for machining for fasteners 3 mm = D = 50 mm Subsector : T02 Registration Date : ID : /0001 National Ref : 2957 Aerospace series Method of preparation of forged samples Subsector : T02 Registration Date :

64 ID : /0001 National Ref : 2952 Aerospace series Heat resisting alloy NI-PH2601 Solution treated and cold worked Bar for forged fasteners D = 50 mm MPa = Rm = MPa Page 63 Subsector : T02 Registration Date : ID : /0001 National Ref : 2813 Aerospace series Aluminium alloy AL-P T6 Drawn tube for pressure applications 0,6 mm = a = 12,5 mm Subsector : T02 Registration Date : ID : /0001 National Ref : 2728 Aerospace series Aluminium alloy AL-C42101 T6 Sand casting a = 20 mm Subsector : T02 Registration Date : ID : /0001 National Ref : 2726 Aerospace series Aluminium alloy Al-C T6 Sand castings a = 20 mm Subsector : T02 Registration Date : ID : /0001

65 Page 64 National Ref : 2716 Aerospace series Test method Determination of susceptibility to intergranular corrosion Wrought aluminium alloy products AL-P2XXX- series, AL-P7XXX- series and aluminium-lithium alloys Subsector : T02 Registration Date : ID : /0001 National Ref : PR NF L Aerospace series Flexible steel wire cable for aircraft controls Construction, diameters and strength Subsector : T02 Registration Date : ID : /0001 National Ref : 3220 Aerospace series Heat resisting nickel base alloy (Ni-P101HT) Cold worked and softened Bar and wire for continuous forging or extrusion for fasteners 3 mm = D = 30 mm Subsector : T02 Registration Date : ID : /0001 National Ref : 3314 Aerospace series Titanium alloy TI-P64001 Solution treated and aged Bar for machining D = 75 mm Subsector : T02 Registration Date :

66 ID : /0001 National Ref : PR NF R Road vehicles - Up to 8-seater vehicles intended for the transport of at least one person with impaired mobility REV/AMD XP R Page 65 Subsector : T02 Registration Date : ID : /0001 National Ref : 3358 Aerospace series Steel FE-PM1503 (X3CrNiMoAl ) Vacuum induction melted and consumable electrode remelted Solution treated and precipitation treated Bar for machining a or D 150 mm Rm ³ MPa Subsector : T02 Registration Date : ID : /0001 National Ref : 2320 Aerospace series Aluminium alloy 2024-T4 Drawn bar a = 75 mm Subsector : T02 Registration Date : ID : /0001 National Ref : NF L Aerospace series - Silicone rubbers - Class 54 - Characteristics Subsector : T02 Registration Date : ID : /0001

67 Page 66 National Ref : NF L Aerospace series - Silicone rubbers - Class 53 - Characteristics Subsector : T02 Registration Date : ID : /0001 National Ref : NF L Aerospace series - Ethylene - Propylene rubbers - Class 41 - Characteristics Subsector : T02 Registration Date : ID : /0001 National Ref : NF L Aerospace series Butadiene - Acrylonitrile rubbers Class 23 Characteristics Subsector : T02 Registration Date : ID : /0001 National Ref : NF L Aerospace series - Ethylene - Propylene rubbers - Class 44 - Characteristics Subsector : T02 Registration Date : ID : /0001 National Ref : NF L Aerospace series Polychloroprène rubbers Class 32 Characteristics

68 Page 67 Subsector : T02 Registration Date : ID : /0001 National Ref : NF L Aerospace series Butadiene Acrylonitrile rubbers Class 24 Characteristics Subsector : T02 Registration Date : ID : /0001 National Ref : NF L Aerospace series - Ethylene - Propylene rubbers - Class 44 - Characteristics Subsector : T02 Registration Date : UNI Italy ID : / National Ref : UNI Aerospace series - General criteria for the qualification of special processes Thisstandardestablishesthegeneralrequirementsregarding: -Qualificationprocessorverificationofsuitabilityofspecialprocesses; -Periodiccontrolsofprocesses; -Renewalofthevalidityofthequalificationorthecomplianceoftheprocesses. REV/AMD UNI 9885:1991 Subsector : T02 Registration Date : BSI Draft Issue Date : United Kingdom Latest Date for Comments : ID : /0001 Draft for public enquiry National Ref : BS 4N 100-1:1999+AMD3. AMD3. Aircraft oxygen systems and equipment. Part 1. Design and installation.

69 Amendment Page 68 Subsector T06: METAL AND PLASTIC CONTAINERS Subsector : T06 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE IN Plastics. Repairing and internal covering of metallic tanks, used for the storage of liquid fuel, with reinforced plastics. This technical report provides rules to repair metallic tanks which walls have been debilitated or perforated. REV/AMD UNE 53991:2011 IN, UNE 53991:2011 IN/1M:2015 Subsector T12: INDUSTRIAL TRUCKS Subsector : T12 Registration Date : LVS Draft Issue Date : Latvia Latest Date for Comments : ID : / National Ref : prlvs 449 Tractors, self propelled vehicles and their trailers types. Definitions This standard defines tractors self-propelled and their trailers groups and definitions of their vehicle groups. This standard set of tractors, self-propelled and their trailers groups and this group in definitions. Groups and definitions are established without changing the manufacturer's intended use. REV/AMD LVS 449 Subsector T15: CYCLES Subsector : T15 Registration Date : ID : /0001 National Ref : PR NF R Cycles - Traceability of cycles componants - Generalities

70 Page 69 Subsector : T15 Registration Date : ID : /0001 National Ref : PR NF R Utility and adapted cycles - Part 4: Specific requirements for cycles trailors Subsector T19: ROAD SAFETY Subsector : T19 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry National Ref : PNE Vertical signs. Road delineators. Junction marker in plastic material. Characteristics, dimensions and test methods. This standard defines the particular characteristics, dimensions and test methods applicable to the vertical delineators made of plastic used in the road sides as a guidance for the road users. The purpose of this standard is to define the characteristics to be met by junction markers usedinroadmarkersandtodescribethetestmethodsforverifyingthesecharacteristics. Thisstandardappliestojunctionmarkersmadeofpolymericmaterial. NOTE The junction markers that are the subject of this standard are not within the scope of EN Therefore, only the clauses of EN that are cited throughout the text of thisstandardareapplicable. REV/AMD UNE :2012 Subsector T20: TRAM- AND RAILWAY ENGINEERING Subsector : T20 Registration Date : ID : /0001

71 National Ref : NF F E : Asbestos survey Survey of materials and products containing asbestos in railway rolling stock Mission and methodolog Page 70 ** End of Sector **

72 List of non-electrotechnical subsectors Sector A: Services Subsector Title ISO/TC CEN/TC reference reference A01 Tourist services / 329; CEN/WS ETO A02 Cleaning services / 328 A03 Postal services / 331 A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM A05 Maintenance services / 319 A06 Building and construction services / 330 A07 Translation services / A08 Funeral services / CEN/BT/TF 139 A09 Facility management / 348 A10 Services of Real Estate Agents / CEN/BT/TF 180; 373 A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4 A12 Consultancy Services / 395; 381 A13 Expertise Services / 405 A14 Aesthetic Services / 403;409 A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

73 Sector B: Building and construction Subsector Title ISO/TC CEN/TC reference reference B01 Fire protection 21 70; 72; 191; 192 B02 Structures 59; ; 167; 250; 277; 346; 349; 284; 288; 297; 340 B03 Concrete ; CEN/WS 009 B04 Cement 74; B05 Fire tests B06 Gypsum / 241 B07 Glass B08 Doors and windows B09 Thermal matters ; 89; 371; CEN/BT WG 173; CEN/WS 036 B10 Timber structures B11 Metal structures B12 Masonry 179; ; 246 B13 Solar energy B14 Geotechnics ; 396 B15 Sanitary appliances / 163; 7 B16 Taps / / B17 Lighting equipment and lighting / 50; 169 application technology B18 Scaffolding / 53 B19 Ceramic tiles B20 Drainage equipment / 165 B21 Baths / / B22 Wallcoverings / 99 B23 District heating / 107 B24 Auxiliary and handicraft work / / B25 Gas distribution installation and / 234; 235; 282 related equipment B26 Road building and maintenance / 178; 227 B27 Waterproofing materials / 128; 254; 361; 314 B28 Floor coverings 38/SC B29 Aggregates / 154 B30 Floor and surfacing / 217; 303; 323; 390 B31 Heating systems in buildings / 228; 247 B32 Precast concrete products / 177; 229

74 B33 Building design ; 325; 388 B34 Building and construction Environmental aspect 350; 351 B99 Undetermined / /

75 Sector C: Chemicals, chemical engineering and food products Subsector Title ISO/TC CEN/TC reference reference C01 Food products ; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054 C02 Paints and related products ; 298; 173 C03 Chemistry ; 363 C04 Laboratory glassware C05 Lac / / C06 Essential oils 54 / C08 Pesticides 81 / C09 Surfactants C10 Starch 93 / C11 Tobacco C12 Glass plant / / C13 Fertilizers ; 260 C16 Wood preservatives / / C17 Trees and plants / / C18 Adhesives / 193 C19 Chemical analysis 201; ; 347 C20 Explosives and firework / 212; 321 C21 Cosmetics C22 Bio-Based products / 411 C99 Undetermined / 386

76 Sector F: Fundamental standards Subsector Title ISO/TC CEN/TC reference reference F01 Technical drawings 10 / F02 Units & symbols 12 / F03 Preferred numbers 19 / F04 Sieves 24 / F05 Measuring instruments 30; ; 171; 176; 237; F06 Terminology principles 37 / 294; 318; 244; 367; 141; CEN/WS 011 F07 Documentation and information ; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS F08 Surfaces / 290 F09 Banking 68 / F10 Statistics 69 / F12 Information processing systems ; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365 F13 Environmental tests / / F14 Graphical technology, 130 / sign-boards and nameplates F15 Material testing in general ; CEN/WS 007 CEN/WS 021 CEN/WS 033 F16 Graphical symbols 145 / F17 Administrative documents 154 CEN/WS MMU F18 Micrographics 171 / F19 Optics 172; ; 170 F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS F21 Value analysis and project / 279 network F22 Logistics / 379; 273 F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

77 CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027 F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

78 Sector H: Products for household and leisure use Subsector Title ISO/TC CEN/TC reference reference H01 Cinematography H02 Photography 42 / H03 Consumer questions / 291 H04 Sports equipment H05 Oil and gas burners / 47; 131 H06 Horology 114 / H07 Space heating ; 110; 130; 179; 180 H08 Sizing systems 133; 137 / H09 Furniture H10 Sewing machines 148 / H11 Heater controls H12 Ceramic and glass-ware for food 166 / H13 Jewellery 174 CEN/WS 047 H14 Caravans H15 Toys H17 Oil stoves / 46 H18 Central heating boilers / 48; 57; 109; 269 H19 Non-electric cookers and barbecues / 49; 281; 295 H22 Smokers lighters and matches / 355; 87 H23 Ladders / 93 H24 Tactile danger warnings / / H25 Large gas appliances / 106; CEN/CLC/JWG FCGA H26 Sealing materials / 108; 208 H27 Educational equipment / / H28 Hunting 191 / H29 Heat pumps / 113 H30 Equipment for children / 252 H31 Dedicated LPG appliances / 181 H32 Culinary utensils H33 Footwear (excluding protective / 309 footwear) H34 Child safety / CEN/BT/WG H99 Undetermined / 299; 364; 369; 402

79 Sector I: Mechanical engineering Subsector Title ISO/TC CEN/TC reference reference I01 Screw threads 1 / I02 Fasteners I03 Limits & fits / / I04 Rolling bearings 4 / I05 Iron pipes I06 Pressure vessels I07 Shafts 14 / I08 Agricultural machines , 334 I09 Small tools I10 Splines / / I11 Machine tools ; 143; 145; 255 I12 Pulleys & belts I13 Gas containers 58 23; 286 I14 Gears 60 / I15 Equipment for petroleum industry I16 Internal combustion engines 70; I17 Machinery in general 72; ; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025 I18 Mining I19 Nuclear energy 85 / I20 Refrigeration 86 44; 182 I21 Chains and chain wheels 100 / I22 Vacuum technology 112 / I23 Pumps I24 Industrial fans I25 Compressors I26 Plain bearings 123 / I27 Earth moving and construction 127; equipment I28 Fluid power 131 / I29 Gas cleaning / 195 I30 Air distribution / 156 I31 Valves 153; ; 236; 105 I32 Flanges / 74 I33 Information processing in automation I34 Non-ferrous metallic pipes / /

80 I35 Leisure and recreational machines / 152 I36 Thermoprocessing technology / 186 I37 Printing and paper machines / 198 I38 Leather production, tannery and / 200; 201 related machinery I39 Machines for metal processing / 202; 322 I40 Industrial piping networks / 267 I41 Membrane filters / 272 I42 Potentially explosive atmospheres / 305 I43 Hydrogen energy 197 / I44 Nanotechnologies I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

81 Sector M: Metallic materials Subsector Title ISO/TC CEN/TC reference reference M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110 M02 Zinc / 209 M03 Foundry technology, ; ECISS/TC 31 ECISS/TC 111 including cast iron M04 Copper M05 Welding M06 Dimensions of wrought products / / M07 Manganese and chromium 65 / M08 Light alloys M09 Iron ores 102 / M10 Metallic coatings M11 Powder metallurgy 119 / M12 Aluminium ores 129 / M13 Ferroalloys 132 / M14 Nickel 155 / M15 Metallic corrosion ; 219

82 M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101 M17 Heavy metal ores 183 / M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407 M20 Tin and tin alloys / 220 M21 Precious metals / 283 M22 Lead and lead alloys / 306 M99 Undetermined / /

83 Sector N: Non-metallic materials Subsector Title ISO/TC CEN/TC reference reference N01 Paper and board N02 Solid fuels ; 343;383; CEN/WS 019 N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061 N04 Refractories N05 Textiles ; 248 N06 Rubber ; 366 CEN/WS 003 N07 Sawn timber 55 38; 175 N08 Mica / / N09 Plastics N10 Cork 87 / N11 Wood-based panels N12 Timber products 99 / N13 Leather N14 Plastics pipes N17 Fluorspar 175 / N18 Glass-fibre reinforced plastics / / N19 Tapes / 253 N20 Ceramics N21 Gaseous fuels and combustible gas 158; ; 408 N22 Feather and related materials / 222 N23 Diamond / 410 N99 Undetermined / /

84 Sector S: Health, environment and medical equipment Subsector Title ISO/TC CEN/TC reference reference S01 Acoustics and sound ; 211 insulation S02 Transfusion equipment 76 / S03 Syringes 84 / S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043 S05 Dentistry S06 Vibration & shock S07 Anaesthetic and respiratory equipment S08 Air quality ; 243; 264; CEN/CLC/JWG CMI S09 Water quality and water supply ; 230; CEN/WS 001 CEN/WS 034 S10 Surgical implants ; CEN/CLC/JWG AIMD S11 Contraceptives 157 / S12 Gas analysis / / S13 Ergonomics S14 Prosthetics 168 / S15 Surgical instruments 170 / S16 Aids for the disabled S17 Respiratory protective devices / 79 S18 Sterilization of equipment ; 204 S19 First aid equipment and rescue systems / 239 S20 Waste collection, handling and / 183 transportation S21 Laboratory medicine, clinical ; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055 S22 Energy saving / CEN/WS 005 CEN/WS 015 S23 Personal & property protection against aggression/burglary protection / 263 S24 Soil quality ; CEN/WS 032

85 S25 Chemical disinfectants and / 216 antiseptics S26 Environmental management 207 CEN/TC 406; CEN/WS 040 S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120 S28 Demining / CEN/WS 029 CEN/WS 013 S99 Undetermined / 205; CEN/BT/TF ; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

86 Sector T: Transport, mechanical handling and packaging Subsector Title ISO/TC CEN/TC reference reference T01 Shipbuilding and maritime 8; ; 300 structures T02 Aerospace ; AECMA; ECSS ;377 T03 Road vehicles ; 326 CEN/WS IMA T04 Tyres 31 / T05 Pallets 51 / T06 Metal and plastic containers ; 221; 265; 266; 268; T07 Glass containers 63 / T08 Cranes T09 Materials handling and ; 149 storage equipment T10 Freight containers ; 280 T11 Steel wire ropes 105 / T12 Industrial trucks ; 324 T13 Lifting chains, hooks and ropes T14 Packaging ; 120 T15 Cycles T16 Lifts & escalators ; 242 T17 Builders hoists / / T18 Elevating platforms / 98 T19 Road safety / 226; 339 T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR T21 Packaging machines / 146 T22 Off-road vehicles / 354 T99 Undetermined / CEN/WS TAF

87 Sector Z: Information technology Subsector Title ISO/TC CEN/TC Z01 Radiocommunication for IT / / Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI Z03 Common O.S.I. activities / CEN/CLC - EWOS Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

88 CEN/WS XFS; CEN/WS XML; CEN/WS ego; CEN/WS ein; CEN/WS epr

89 REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC September 2018 Issued on : 5 October 2018

90 Page 1 Information Procedure on Standards Notifications registered at CCMC during September 2018 Sector W : ELECTRICAL ENGINEERING Register issued on : 5 October 2018