Λευκωσία, 9 Μαϊου ΠΡΟΣ: Όλα τα Μέλη. Κυρία/ε,

Transcription

1 Λευκωσία, 9 Μαϊου 2017 ΠΡΟΣ: Όλα τα Μέλη Κυρία/ε, Σας επισυνάπτουμε γνωστοποιήσεις από Εθνικούς Οργανισμούς Τυποποίησης, μελών των Ευρωπαϊκών Οργανισμών Τυποποίησης CEN/CENELEC, που περιέχουν τους τίτλους προτεινόμενων εθνικών προτύπων. Σύμφωνα με την Ευρωπαϊκή Οδηγία που αφορά την πληροφόρηση σε θέματα τεχνικών προτύπων, μπορείτε, αφού μελετήσετε τους τίτλους: α) να ζητήσετε όπως λάβετε ηλεκτρονικά ολόκληρο το κείμενο του προσχεδίου εθνικού προτύπου, εάν αυτό είναι διαθέσιμο, β) να συμμετάσχετε στις συναντήσεις της τεχνικής επιτροπής του Εθνικού Οργανισμού Τυποποίησης που ετοιμάζει το προσχέδιο προτύπου και γ) να υποβάλετε εισήγηση στον CYS, να αρχίσει τυποποιητική εργασία σε Ευρωπαϊκό επίπεδο σχετικά με το θέμα της γνωστοποίησης, εάν φυσικά πιστεύετε ότι το εν λόγω εθνικό πρότυπο θα επηρεάσει την ελεύθερη διακίνηση προϊόντων ή την κυπριακή βιομηχανία και οικονομία. Τυχόν σχόλια και παρατηρήσεις παρακαλώ όπως υποβάλλονται στον Κυπριακό Οργανισμό Τυποποίησης. Σε περίπτωση που δεν υπάρξει οποιαδήποτε ανταπόκριση, ο CYS δε θα φέρει ένσταση στην προώθηση των υπό αναφορά εθνικών προτύπων. Για περισσότερες πληροφορίες μπορείτε να επικοινωνείτε με την κα. Μαριλένα Νικολάου, Λειτουργό Διοίκησης και Διεθνών Σχέσεων του Κυπριακού Οργανισμού Τυποποίησης (CYS), τηλ: , Φαξ και στην ηλεκτρονική διεύθυνση: m.nicolaou@cys.org.cy Με εκτίμηση, Ανδρέας Ανδρέου, Διευθυντής Βιομηχανίας, για Γενικό Γραμματέα. /ΜΚ. Γρίβα Διγενή 38 & Δεληγιώργη 3, 1066, Τ.Θ , 1509 Λευκωσία, Κύπρος, Τηλ , Φαξ , meropi@ccci.org.cy, Ιστοσελίδα:

2 Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from to Register issued on : A list of subsectors can be found at the end of this document.

3 Information procedure Page 2 Monthly Notifications Register Notifications registered at CCMC from to Sector A : SERVICES Register issued on :

4 Subsector A08: FUNERAL SERVICES Page 3 Subsector : A08 Registration Date : UNE Spain Latest Date for Comments : ID : P /0002 Draft for public enquiry PNE Coffins. Test Methods. This standard describes test methods to assess the structural strength of common and specialcoffins. The test methods apply to coffins of any size and shape, regardless of the materials they are constructed. This standard applies also to those coffins exclusively made for incineration. REV/AMD UNE 11030:1993, UNE 11030:1993 ERRATUM:2009 Subsector A11: SAFETY AND SECURITY Subsector : A11 Registration Date : TSE Turkey ID : t / Student and personnel transport services- General rules This standard includes, general rules for management, transport services characteristics driver, guide and passanger of student and personnel transport services Subsector A99: UNDETERMINED Subsector : A99 Registration Date : UNI Italy ID : / UNI Estimation of the beach facilities value. Guidelines The aim of the standard is to provide a guideline for estimating the value of the beach facilities. Moreover, it enable beach operators to prepare the appropriate documentation to request the new state property concession in cases of administrative procedure by a formal act. This guidelines is applicable to a state property concession where a beach facility already insists or that a new one has to be built.

5 Page 4 ** End of Sector **

6 Information procedure Page 5 Monthly Notifications Register Notifications registered at CCMC from to Sector B : BUILDING AND CONSTRUCTION Register issued on :

7 Subsector B01: FIRE PROTECTION Page 6 Subsector : B01 Registration Date : NBN Belgium ID : BE664041/0001 Draft for public enquiry NBN S :2015/prA1 Fire detection and fire alarm systems - Part 1: Rules for risk analysis and assessment of the needs, the study and the design, installation, commissioning, control, use, inspection and maintenance REV/AMD NBN S :2015 Subsector B02: STRUCTURES Subsector : B02 Registration Date : NEN Netherlands ID : / , NPR 9998:2017 Concept nl Assessment of buildings in case of erection, reconstruction and disapproval - Basic rules for seismic actions: induced earthquakes NPR 9998 gives practical methods and calculation methods to improve the robustness against actions from earthquakes for buildings for the induced earthquakes in the province of Groningen. It can be used for construction, reconstruction and disapproval. The TS is based upon Eurocode 8 (EN 1998). Subsector B03: CONCRETE Subsector : B03 Registration Date : NBN Belgium ID : BE664040/0001 Draft for public enquiry prnbn B Testing hardened concrete - Absorption of water by immersion REV/AMD NBN B :1989 Subsector B04: CEMENT

8 Subsector : B04 Registration Date : ISRM Former Yugoslav Republic of Macedonia ID : / HМКС1017:2017 Pozzolanic Materials Constituent for cement production Specification, criteria and conformity assessment Determination of compressive strength This standard establishes specifications for pozzolanic materials for use as an ingredient for cement, it defines, the requirements regarding the properties, the methods of testing and the procedures for conformity assessment of the pozzolanic materials. Page 7 Subsector B08: DOORS AND WINDOWS Subsector : B08 Registration Date : DIN Germany ID : / Building hardware - Door handles, door plates and door roses - Concepts and definitions, dimensions, requirements Subsector B09: THERMAL MATTERS Subsector : B09 Registration Date : DIN Germany ID : / Thermal protection and energy economy in buildings - Part 3: Protection against moisture subject to climate conditions - Requirements and directions for design and construction Subsector B12: MASONRY Subsector : B12 Registration Date : NBN

9 Belgium ID : BE664032/0001 Draft for public enquiry prnbn B Test methods for mortars bond strength between masonry units and mortar cross shaped test Page 8 Subsector B17: LIGHTING EQUIPMENT AND LIGHTING APPLICATION TECHNOLOGY Subsector : B17 Registration Date : UNI Italy ID : / , , UNI Light and lighting -Standard File Format for the electronic transfer of photometric and spectrometric data of luminaires and lamps. This standard specifies an XML based data format for the transfer of photometric, colorimetric, spectrometric and energy consumption data of luminaires, lamps and LED modules. Subsector B23: DISTRICT HEATING Subsector : B23 Registration Date : DIN Germany ID : / District Heating System - Safety equipment of substations, house substations and consumers installations connected to hot-water district heating networks Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT Subsector : B25 Registration Date : NEN Netherlands ID : /0001

10 , , NPR :2017 Concept nl Code of practice gas installations - Section flue systems - Part 45: Working on chimney systems and the evaluation of the consequences of changes to the existing ventilation and infiltration of the building - Guidelines to NEN 2757 and NEN 8757 This code of practice forms a guidance to the use of NEN 2757, NEN and NEN This code of practice gives determination methods for the smoke outlet in existings buildings. Page 9 Subsector B26: ROAD BUILDING AND MAINTENANCE Subsector : B26 Registration Date : ASI Austria ID : / ÖNORM B Bituminous mixtures - Material specifications - Stone Mastic Asphalt - Part 2: Performance based requirements - Rules for the implementation of ÖNORM EN This ÖNORM specifies selected requirements for stone mastic asphalt complying with ÖNORM EN , ÖNORM EN and ÖNORM EN , based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. This ÖNORM specifies the implementation of the performance based approach defined in ÖNORM EN and shall be applied to asphalt layers exposed to high stresses (e.g. due to high traffic loads, temperature changes). Subsector : B26 Registration Date : ASI Austria ID : / ÖNORM B 3583 Bituminous mixtures - Material specifications - Hot Rolled Asphalt - Rules for the implementation of ÖNORM EN This ÖNORM specifies selected requirements Hot Rolled Asphalt complying with ÖNORM EN , ÖNORM EN and ÖNORM EN EN , based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined.

11 Page 10 Subsector : B26 Registration Date : ASI Austria ID : / ÖNORM B Bituminous mixtures - Material specifications - Asphalt Concrete - Part 2: Performance based requirements - Rules for the implementation of ÖNORM EN This ÖNORM specifies selected requirements asphalt concrete complying with ÖNORM EN , ÖNORM EN and ÖNORM EN EN , based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. This ÖNORM specifies the implementation of the performance based approach defined in ÖNORM EN and shall be applied to asphalt layers exposed to high stresses (e.g. due to high traffic loads, temperature changes). Subsector : B26 Registration Date : ASI Austria ID : / ÖNORM B Bituminous mixtures - Material specifications - Asphalt Concrete - Part 1: Empirical approach - Rules for the implementation of ÖNORM EN This ÖNORM specifies selected requirements asphalt concrete complying with ÖNORM EN , ÖNORM EN and ÖNORM EN , based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. This ÖNORM supports the implementation of the empirical approach defined in ÖNORM EN Subsector : B26 Registration Date : ASI Austria ID : / ÖNORM B 3581 Bituminous mixtures - Material specifications - Asphalt concrete for very thin layers - Rules for the implementation of ÖNORM EN This ÖNORM specifies selected requirements asphalt concrete for very thin layers complying

12 Page 11 with ÖNORM EN , ÖNORM EN und ÖNORM EN , based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. Subsector : B26 Registration Date : ASI Austria ID : / ÖNORM B 3582 Bituminous mixtures - Material specifications - Soft Asphalt - Rules for the implementation of ÖNORM EN This ÖNORM specifies selected requirements soft asphalt complying with ÖNORM EN , ÖNORM EN and ÖNORM EN EN , based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. Subsector : B26 Registration Date : ASI Austria ID : / ÖNORM B Bituminous mixtures - Material specifications - Stone mastic asphalt - Part 1: Empirical approach - Rules for the implementation of ÖNORM EN This ÖNORM specifies selected requirements Stone mastic asphalt complying with ÖNORM EN , ÖNORM EN and ÖNORM EN EN , based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. Subsector : B26 Registration Date : ASI Austria ID : /

13 Page 12 ÖNORM B 3585 Bituminous mixtures - Material specifications - Mastic asphalt - Rules for the implementation of ÖNORM EN This ÖNORM specifies selected requirements mastic asphalt complying with ÖNORM EN , ÖNORM EN and ÖNORM EN EN , based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. Subsector : B26 Registration Date : ASI Austria ID : / ÖNORM B Bituminous mixtures - Material specifications - Porous asphalt (PA) - Part 1: Empirical Approach - Rules for the implementation of ÖNORM EN This ÖNORM specifies selected requirements Porous asphalt complying with ÖNORM EN , ÖNORM EN and ÖNORM EN EN , based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. Subsector : B26 Registration Date : ASI Austria ID : / ÖNORM B Bituminous mixtures - Material specifications - Porous asphalt (PA) - Part 2: Performance based requirements - Rules for the implementation of ÖNORM EN This ÖNORM specifies selected requirements for porous asphalt complying with ÖNORM EN , ÖNORM EN and ÖNORM EN , based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. This ÖNORM specifies the implementation of the performance based approach defined in ÖNORM EN and shall be applied to asphalt layers exposed to high stresses (e.g. due to high traffic loads, temperature changes).

14 Page 13 Subsector : B26 Registration Date : ASI Austria ID : / ÖNORM B 3587 Bituminous mixtures - Material specifications - Cold asphalt (CA) - Rules following ÖNORM EN This ÖNORM specifies selected requirements cold asphalt complying with ÖNORM B 3130, ÖNORM B 3507, ÖNORM B 3508, ÖNORM EN and ÖNORM EN , based on the specific geographic, topographic and climatic conditions in Austria. The present ÖNORM shall be applied jointly with these standards. In order to cover the load situation in Austria, different types of mixtures, related to the mixture composition and requirements for aggregates, are defined. Subsector : B26 Registration Date : UNMZ Draft Issue Date : Czech Republic Latest Date for Comments : ID : /0001 Road building - Cationic bituminous emulsions The aim of the amendment Z1 is modification of tables 1 and 4. Use of new information in this area. REV/AMDAmendmentZ1ofČSN736132(2015) Subsector B27: WATERPROOFING MATERIALS Subsector : B27 Registration Date : SNV Draft Issue Date : Switzerland Latest Date for Comments : ID : CH170007/0001 Draft for public enquiry prsia 281 Sealingsheets- Plasticsealingsheets, Bituminoussealingsheetsand sealing sheets produced from clay REV/AMD SIA 281:2013 Subsector B30: FLOOR AND SURFACING

15 Page 14 Subsector : B30 Registration Date : UNE Spain Latest Date for Comments : ID : P /0003 Draft for public enquiry PNE EX Surfaces for pedestrian transit. Determination of the slip resistance by pendulum friction method. Wet test. This standard describes a test method used in the laboratory or in situ to determine the value of the slip resistance of flooring surfaces for pedestrian transit using the pendulum frictiontest,bothinwetconditions. This standard is compatible with the test of the friction pendulum performed under wet conditions and with rubber shoe 57, described in Annex C of technical specification CEN / TS Subsector : B30 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry PNE EX Surfaces for pedestrian transit. Determination of the slip resistance by pendulum friction method. Dry test. This standard describes a test method used in the laboratory or in situ to determine the value of the slip resistance of flooring surfaces for pedestrian transit using the pendulum frictiontest,bothindryconditions. This standard is compatible with the pendulum method of friction in dry conditions and is used 96 rubber slider; which is described in the annex C of the Technical Specification CEN/TS Subsector B99: UNDETERMINED Subsector : B99 Registration Date : DIN Germany ID : / Placement of service conduits in public circulation areas - Guideline for planning

16 ** End of Sector ** Page 15

17 Information procedure Page 16 Monthly Notifications Register Notifications registered at CCMC from to Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS Register issued on :

18 Subsector C01: Food products Page 17 Subsector : C01 Registration Date : UNI Italy ID : / UNI Extra virgin olive oil - Determination of hydroxytyrosol and tyrosol content in extra virgin olive oils This standard describes an analytical method for the quantification of total hydroxytyrosol and tyrosol in extra virgin olive oil. Subsector : C01 Registration Date : UNMZ Draft Issue Date : Czech Republic Latest Date for Comments : ID : / Chocolate and chocolate confectionery - Determination of fat-free cocoa solids Standard specifies method for determination of fat-free cocoa solids in chocolate and chocolate products. It is applicable also for cocoa and cocoa based products. Method is based on determination of caffeine and theobromine by HPLC and calculation of fat-free cocoa solids using suitable factor. REV/AMD CSN (2000) Subsector : C01 Registration Date : UNMZ Draft Issue Date : Czech Republic Latest Date for Comments : ID : / Testing methods for fish, fish products and canned fish. Determination of weight of content and weight part of ingredients. Standard specifies method for determination of weight of content, drained weight, drained washed weight and weight part of ingredients of fish products and products containing fish. Method of determination is based on weighting of whole product, its parts and/or ingredients. REV/AMD CSN (1982) Subsector : C01 Registration Date : BDS Draft Issue Date : Bulgaria Latest Date for Comments :

19 ID : BG032005/0001 Draft for public enquiry prбдс508 Tomato paste This standard refers to tomato products obtained by concentrating juice from pasted ripe red tomatoes without or with the addition of salt, filled in suitable packages, preserved by pasteurisation or sterilization with aseptic filling, intended for direct consumption or as semi-finished products for industrial and culinary purposes. Page 18 REV/AMDБДС508:1985 Subsector : C01 Registration Date : BDS Draft Issue Date : Bulgaria Latest Date for Comments : ID : BG032006/0001 Draft for public enquiry prбдс8392 Vegetable juices This standard specifies requirements for vegetable juices obtained from fresh vegetables or semi-finished products, without or with the addition of salt, sugar, citric acid, ascorbic acid, packed in hermetically sealed containers, heat-preserved (by sterilization or pasteurisation). REV/AMDБДС8392:1976 Subsector : C01 Registration Date : TSE Turkey ID : t / Olive elemination/seperation machine Olive elemination/seperation machine Subsector : C01 Registration Date : TSE Turkey ID : t / Fruit Powder Fruit Powder

20 Page 19 Subsector : C01 Registration Date : TSE Turkey ID : t / Tarhana Powder Tarhana Powder Subsector : C01 Registration Date : TSE Turkey ID : t / Corn Semolina This standard applies to corn semolina. Subsector : C01 Registration Date : TSE Turkey ID : t / Sunflower seed flour- Edible This standard specifies the requirements for edible sunflower seed flour. It does not cover other sunflower products used as animal feed or for other purposes. Subsector : C01 Registration Date : TSE Turkey ID : t / Shaped Chips-Corn Chips This standard covers corn chips.

21 Page 20 Subsector : C01 Registration Date : TSE Turkey ID : t / Extruded Snack Food This standard covers the extruded snack food. Subsector : C01 Registration Date : TSE Turkey ID : t / Crude Sunflowerseed Oil This standard covers crude sunflowerseed oil which will be used as food product. after processing. Subsector : C01 Registration Date : TSE Turkey ID : t / Canned meat This standard covers canned meat Subsector : C01 Registration Date : TSE Turkey ID : tst02812/ Margarine-Vegetable Origin This standard applies to vegetable origin margarine. It does not apply to margarine which is

22 Page 21 animal origin and minarine which is vegetable origin. Subsector : C01 Registration Date : TSE Turkey ID : tst03862/ Machinary for agriculture and forestry - Tractors and machinary - Classification Machinary for agriculture and forestry - Tractors and machinary - Classification Subsector : C01 Registration Date : TSE Turkey ID : tst04017/ Hatching Eggs This standard applies to hatching eggs of hen Subsector C02: PAINTS AND RELATED PRODUCTS Subsector : C02 Registration Date : DIN Germany ID : / Paints, varnishes and coatings - Corrosion protection of supporting thin-walled building components made of steel - Part 2: Surveillance and certification requirements Subsector C06: ESSENTIAL OILS Subsector : C06 Registration Date : UNE

23 Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry PNE Cosmetic raw materials. Sunscreens. Benzoic acid, 2-[4-(diethylamino)-2- hydroxybenzoyl]-hexylester. This standard defines the physico-chemical characteristics required to benzoic acid, 2-[-4- diethyllamino)-2-hydroxybenzoyl]-, hexylester for use in cosmetics REV/AMD UNE 84695:2006 Page 22 Subsector C11: TOBACCO Subsector : C11 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry PNE Tobacco and tobacco products. Determination of chloride content. Potentiometric method. This UNE standard specifies a potentiometric method for the determination of chloride content in tobacco products. REV/AMD UNE :2011 Subsector C17: TREES AND PLANTS Subsector : C17 Registration Date : TSE Turkey ID : t / Ornamental plants Nomenclature This standard covers Turkish names, botanical names and abbreviations of ornamental plants in the plant production. Subsector : C17 Registration Date : TSE Turkey ID : t /0001

24 Ornamental plants - Seedlings and saplings - Form, coding and dimensioning This standard covers the rules for the form, coding and dimensioning of ornamental plants before sale. Page 23 Subsector : C17 Registration Date : TSE Turkey ID : t / Ornamental plants Production Terms and definitions This standard covers terms and definitions related to ornamental plants in plant production. Subsector C19: CHEMICAL ANALYSIS Subsector : C19 Registration Date : TSE Turkey ID : t / Crude Sodium Borates for Industrial use -Determination of Total and Alkali -Soluble Calcium and Magnesium Contents- Flame Atomic Absorption Spectrofotometric Method This standard covers determination of total and alkali-soluble calcium and magnesium contents of crude sodium borates for industrial use by flame atomic absorption method Subsector : C19 Registration Date : TSE Turkey ID : t / Sodium Perborates For Industrial Use Determination of Rate of Solution Conductivity Method This standard covers determination of rate of solution in sodium perborates by conductivity method

25 Page 24 Subsector : C19 Registration Date : TSE Turkey ID : t / Crude sodium borates for industrial use - Determination of loss on ignition at 950 C This standard covers determination of loss on ignition at 950ºC in crude sodium borates for industrial use Subsector C20: EXPLOSIVES AND FIREWORKS Subsector : C20 Registration Date : TSE Turkey ID : t / Mine action - Explosive Ordnance Disposal (EOD) This standard provides specifications and guidelines for the safe conduct of Explosive Ordnance Disposal (EOD) operations as part of a mine action programme and applies to the disposal of mines and ERW, including unexploded sub-munitions. Subsector : C20 Registration Date : TSE Turkey ID : t / Mine action - Operational testing of mine detection dogs and handlers This standard provides specifications and guidelines for the external operational testing of Mine Detection Dogs (MDD) and their handlers required to work in areas where no earlier attempts have been made to clear the mines, either manually or by machine. Subsector C99: UNDETERMINED Subsector : C99 Registration Date :

26 Page 25 UNI Italy ID : / , UNI Energy audits for processes. Guidance. This technical report is a voluntary guidance to facilitate the comprehension and application of EN and 3 on energy audits for processes. It is a useful tool for the execution of energy audits for processes by detailing each step of the audit path defined by the diagram in Annex A of EN ** End of Sector **

27 Information procedure Page 26 Monthly Notifications Register Notifications registered at CCMC from to Sector F : FUNDAMENTAL STANDARDS Register issued on :

28 Subsector F06: TERMINOLOGY PRINCIPLES Page 27 Subsector : F06 Registration Date : ASI Austria ID : / , ÖNORM A 2706 Technical requirements for terminology management software based on ISO This ÖNORM provides a list of technical requirements for terminology management software and is based on ISO It specifies quality and examination criteria for software, which serve as a basis for development and acquisition/purchasing. Subsector : F06 Registration Date : NEN Netherlands ID : / , NTA :2017 nl Social care - Information architecture within the youth sector - Part 1: Dutch youth referral index This national technical contains the Dutch youth referral index. This is a registration system that supports local approach of problems of youth in the age of 0 to 23. ICTU develops the index commisioned by the government. Subsector : F06 Registration Date : NEN Netherlands ID : / , NTA :2017 Concept nl Social care - Information architecture within the youth sector - Part 2: Electronic message exchange (EBV) This national technical contains the Dutch youth referral index. This is a registration system that supports local approach of problems of youth in the age of 0 to 23. ICTU develops the index commisioned by the government. Subsector : F06 Registration Date : BDS Bulgaria ID : BG028001/0001

29 prbds Metrology. Part 2: Vocabulary of terms in legal metrology This standard is based on International Vocabulary of Terms in Legal Metrology (VIML/ edition 2013). This vocabulary is intended to be used by metrologists as well as by other professionals involved in activities pertaining to legal metrology - from measurement and legal metrological control to the development of legislation. The vocabulary can also be a guide for governmental and intergovernmental organizations, trade associations, manufacturers of measurement tools and users of metrological services. Page 28 REV/AMDБДС :2002 Subsector F07: DOCUMENTATION AND INFORMATION Subsector : F07 Registration Date : NEN Netherlands ID : / , NTA :2017 nl Social care - Information architecture within the youth sector - Part 0: General specifications This national technical contains the Dutch youth referral index. This is a registration system that supports local approach of problems of youth in the age of 0 to 23. ICTU develops the index commisioned by the government. Subsector F15: MATERIAL TESTING IN GENERAL Subsector : F15 Registration Date : DIN Germany ID : / Activity measurement methods for the clearance of radioactive substances and nuclear facility components - Part 6: Rubble and buildings Subsector F20: QUALITY ASSURANCE Subsector : F20 Registration Date :

30 Page 29 TSE Turkey ID : t / , Management system standard for Hygiene and Sanitation-Requirements This standard specifies the requirements of the management system for hygiene and sanitation. ** End of Sector **

31 Information procedure Page 30 Monthly Notifications Register Notifications registered at CCMC from to Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE Register issued on :

32 Subsector H04: SPORTS EQUIPMENT Page 31 Subsector : H04 Registration Date : ASI Austria ID : / ÖNORM ISO Assembly, adjustment and inspection of an alpine ski/binding/boot (S-B-B) system (ISO 11088:2015) This International Standard specifies a method for the installation, adjustment and testing of the Skibindungsmechanik, which are integrated in a practical manner the requirements of international standards for skis, boots and bindings. It is aimed at all individuals and institutions that deal with the above procedure. In particular, they aimed at the sports retail market. It applies to a functional unit ski-shoe-binding (SBS) for alpine skiing, is one of the at least one element of the user equipment. Subsector H23: LADDERS Subsector : H23 Registration Date : AFNOR France ID : /0001 PR NF E Elements of industrial facilities - Permanent means of access - Choice of a means of access Subsector H33: FOOTWEAR (EXCLUDING PROTECTIVE FOOTWEAR) Subsector : H33 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry PNE Footwear. Determination of the rubbing resistance of leather and synthetic materials for shoe uppers using rubber This standard establishes a method for determining the friction resistance of leather and syntheticmaterials,usingarubberelement. The method intends to set test conditions similar to those given in the practical use of shoes subjected to high stress, for instance, in military footwear, hiking footwear and children's footwear, in which cases it is to be expected that friction will occur on the instep of one shoe and the sole of the other. The method is applicable to any type of leather and to synthetic

33 Page 32 materials intended for shoe uppers. REV/AMD UNE 59231:1997 ** End of Sector **

34 Information procedure Page 33 Monthly Notifications Register Notifications registered at CCMC from to Sector I : MECHANICAL ENGINEERING Register issued on :

35 Subsector I02: FASTENERS Page 34 Subsector : I02 Registration Date : ASI Austria ID : / ÖNORM M Countersinks for screws - Part 2: Diameters of counterbores for hexagon head screws and hexagon socket head screws - Manufacturing dimensions This ÖNORM specifies diameters of counterbores in construction parts for hexagon bolts, hexagon nuts and cylinder head screws with and without shims. Subsector : I02 Registration Date : AFNOR France ID : /0001 PR NF E Square nuts - Symbole Q - Product grade C Subsector : I02 Registration Date : AFNOR France ID : /0001 PR NF E Screws - Square head - Symbole Q Subsector : I02 Registration Date : AFNOR France ID : /0001 PR NF E Prevailing torque hexagon regular nuts (with non-metallic insert) with conical spring tightening washer - Product grade A

36 Page 35 Subsector : I02 Registration Date : AFNOR France ID : /0001 PR NF E Fasteners - Hexagon nuts with tightening plain washer - Product grade A Subsector : I02 Registration Date : AFNOR France ID : /0001 PR NF E Hexagon nuts with conical spring tightening washer - Product grade A Subsector : I02 Registration Date : AFNOR France ID : /0001 PR NF E Screws - Cross recedded mushroom head ("poeliers") - Product grade A - Symbole RL Z Subsector : I02 Registration Date : DIN Germany ID : / Cross recessed pan head screws with collar - Product grade A Subsector I09: SMALL TOOLS Subsector : I09 Registration Date :

37 Page 36 AFNOR France ID : /0001 PR NF E Tools for pressing - Roller cams - General specifications Subsector : I09 Registration Date : AFNOR France ID : /0001 PR NF E tools for pressing - Ring bolt - Dimensions Subsector : I09 Registration Date : AFNOR France ID : /0001 PR NF E Tools for pressing - Wear plates - General specifications Subsector : I09 Registration Date : AFNOR France ID : /0001 PR NF E Press tools - Rectangular retainers and percussion plates for flanged punches - Top fixing Subsector : I09 Registration Date : AFNOR France ID : /0001

38 PR NF E Press tools - Square retainers and percussion plates for flanged punches - Top fixing Page 37 Subsector I12: PULLEYS & BELTS Subsector : I12 Registration Date : AFNOR France ID : /0001 PR NF T Conveyor belts - Maximum values of the crown of the drums Subsector : I12 Registration Date : DIN Germany ID : / Synchronous belt drives, metric pitch; synchronous belts Subsector : I12 Registration Date : DIN Germany ID : / Synchronous belt drives, metric pitch; tooth space profile of synchronous pulleys Subsector I18: MINING Subsector : I18 Registration Date : DIN

39 Page 38 Germany ID : / Elastomere scraper plates for belt conveyors in hard coal mines Subsector I19: NUCLEAR ENERGY Subsector : I19 Registration Date : ASI Austria ID : / , , ÖNORM S 5213 X-ray protective devices for medical use of X-rays up to 300 kv This ÖNORM applies together with OVE EN : for X-ray protective devices for X-ray users as well as for patients. Subsector : I19 Registration Date : ASI Austria ID : / , ÖNORM S 2607 Radioactive contamination testing of surfaces This ÖNORM contains rules for the determination of surface contamination with wipe or adhesive test as well as direct testing. Subsector : I19 Registration Date : DIN Germany ID : / Construction of concrete hot cells - Part 1: Requirements for remotely operated cells, Supplement 4: Design of Gas-filled Double-bend Ducts in Concrete Shields against Gamma Radiation

40 Page 39 Subsector : I19 Registration Date : DIN Germany ID : / Nuclear facilities - Protection of metallic surfaces of structural parts from damage from assembly aids, gaskets, packings, packaging material and thermal insulating materials Subsector I28: FLUID POWER Subsector : I28 Registration Date : AFNOR France ID : /0001 PR NF E Pneumatic fluid power - Directional control valve with three ports - mounting surfaces of subplate - Pipe thread Subsector I37: PRINTING AND PAPER MACHINES Subsector : I37 Registration Date : SNV Draft Issue Date : Switzerland Latest Date for Comments : ID : CH170006/0001 Draft for public enquiry prsn Input control of printing paper after paper wetting index (PBI) Subsector I99: UNDETERMINED Subsector : I99 Registration Date : AFNOR

41 Page 40 France ID : /0001 PR XP E Equipment for the manufacture of products made of composite materials - Moulding tools applied to the thermocompression, thermostamping processes - Specification ** End of Sector **

42 Information procedure Page 41 Monthly Notifications Register Notifications registered at CCMC from to Sector M : METALLIC MATERIALS Register issued on :

43 Subsector M10: METALLIC COATINGS Page 42 Subsector : M10 Registration Date : DIN Germany ID : / Black oxide coatings on ferrous metal components - Requirements and test methods Subsector M15: METALLIC CORROSION Subsector : M15 Registration Date : AFNOR France ID : /0001 PR NF A High strength steels for civil engineering works. Assessment of the embrittling effect of a medium by means of slow tensile testing ** End of Sector **

44 Information procedure Page 43 Monthly Notifications Register Notifications registered at CCMC from to Sector N : NON-METALLIC MATERIALS Register issued on :

45 Subsector N03: PETROLEUM PRODUCTS Page 44 Subsector : N03 Registration Date : ASI Austria ID : / ÖNORM C 1108 Liquid fuels - Residual fuels for heating purposes - Requirements The requirements and tests specified in this ÖNORM are applicable to the residual heating oils "fuel oil light", "fuel oil medium", "heavy fuel oil 1.0", "heavy fuel oil 2.5" and "heavy fuel oil SQ". Subsector : N03 Registration Date : TSE Turkey ID : t / Pyrolitic liquid fuel - Produced by pyrolysis of used tyres and plastics This standard specifies requirements and test methods for pyrolitic liqid fuel produced by pyrolysis of used tires and plastics. Subsector N04: REFRACTORIES Subsector : N04 Registration Date : TSE Turkey ID : t / Magnesite and dolomite based refractories-determination of boron content-titrimetric method This standard covers determination of boron content of magnesite and dolomite based refractories by titrimetric method Subsector N06: RUBBER Subsector : N06 Registration Date : DIN

46 Page 45 Germany ID : / Sheets of elastomers for waterproofing; terms of delivery Subsector N09: PLASTICS Subsector : N09 Registration Date : DIN Germany ID : / Polyethylene (PE) pipes - PE 80, PE General quality requirements, testing; Text in German and English Subsector N10: CORK Subsector : N10 Registration Date : UNE Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry PNE Cork stoppers. Determination of releasable 2,4,6-trichloroanisol (TCA) relargable This method intends to simulate mmigration phenomena that may occur when cork stoppers areusedtoclosewinebottles. It consists of determining the releasable 2,4,6-trichloroanisol (TCA) based on an equilibrium between the solid (cork) and the liquid (hydro-alcoholic simulator) matrices, After submitting a sample of cork stoppers to a period of maceration in a hydro-alcoholic solution. This standard is applicable to all types of cork stoppers. Subsector N13: LEATHER Subsector : N13 Registration Date : UNE

47 Page 46 Spain Latest Date for Comments : ID : P /0001 Draft for public enquiry PNE Leather. Sole leather specifications. This standard aims at establishing the features that leather for soles must have so that it can be considered quality leather. REV/AMD UNE 59020:1988 ** End of Sector **

48 Information procedure Page 47 Monthly Notifications Register Notifications registered at CCMC from to Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT Register issued on :

49 Subsector S08: AIR QUALITY Page 48 Subsector : S08 Registration Date : UNI Italy ID : / UNI Emissions measurement - Determination of silica in conveyed gas flows - X-ray diffraction method This Standard describes a method for sampling air in ducts on filtering membranes and analysis of the dust collected by X-Ray diffraction to determine the content of quartz and cristobalite (free crystalline silica) in the sample. The method is applicable for silica content of about 0.02 micrograms per square millimeter of dust surface. Subsector S09: WATER QUALITY AND WATER SUPPLY Subsector : S09 Registration Date : DIN Germany ID : / UV devices for water treatment - Part 1: Low pressure UV devices Subsector : S09 Registration Date : TSE Turkey ID : tst12468/ Technical spesification for the supply of ring-shaped elastomer joints for brake coupling heads This specification governs the supply of ring-shaped elastomer joints for brake coupling heads. Subsector S24: SOIL QUALITY Subsector : S24 Registration Date : NEN

50 Netherlands ID : / NEN 5720:2017 Concept nl Soil quality - Sediments - Strategy for exploratory survey - Investigation of the environmental quality of sediments This standard can be used for the investigation of suspected and not suspected locations. Page 49 Subsector S26: ENVIRONMENTAL MANAGEMENT Subsector : S26 Registration Date : AFNOR France ID : /0001 NF X Environmental management system - Guide for the implementation by steps of an environmental management system Subsector S99: UNDETERMINED Subsector : S99 (Secondary Subsector) Registration Date : NEN Netherlands ID : / , NTA :2017 nl Social care - Information architecture within the youth sector - Part 0: General specifications This national technical contains the Dutch youth referral index. This is a registration system that supports local approach of problems of youth in the age of 0 to 23. ICTU develops the index commisioned by the government. Subsector : S99 (Secondary Subsector) NEN Netherlands ID : /0001 Registration Date :

51 Page , NTA :2017 nl Social care - Information architecture within the youth sector - Part 1: Dutch youth referral index This national technical contains the Dutch youth referral index. This is a registration system that supports local approach of problems of youth in the age of 0 to 23. ICTU develops the index commisioned by the government. Subsector : S99 (Secondary Subsector) Registration Date : NEN Netherlands ID : / , NTA :2017 Concept nl Social care - Information architecture within the youth sector - Part 2: Electronic message exchange (EBV) This national technical contains the Dutch youth referral index. This is a registration system that supports local approach of problems of youth in the age of 0 to 23. ICTU develops the index commisioned by the government. ** End of Sector **

52 Information procedure Page 51 Monthly Notifications Register Notifications registered at CCMC from to Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING Register issued on :

53 Subsector T02: AEROSPACE Page 52 Subsector : T02 Registration Date : AFNOR France ID : /0001 NF L Aerospace series - Silicone rubbers - Class 50 D - Characteristics Subsector : T02 Registration Date : AFNOR France ID : /0001 NF L Aerospace series - Butadiene - Acrylonitrile rubbers - Class 21 - Characteritics Subsector : T02 Registration Date : AFNOR France ID : /0001 NF L Aerospace series NF L standardized rubber materials Technical specification Subsector : T02 Registration Date : AFNOR France ID : /0001 NF L Aerospace series NF L standardized rubber materials Technical specification Subsector : T02 Registration Date : AFNOR

54 Page 53 France ID : /0001 NF L Aerospace industry - Fluorosilicone rubbers - Class 63 - Characteristics Subsector : T02 Registration Date : DIN Germany ID : / Aerospace series - Screws in material Nominal tensile strength 1220 MPa, 1400 MPa und 1550 MPa up to 315 C - Technical specifications Subsector : T02 Registration Date : DIN Germany ID : / Aerospace - Nuts, hexagon, slotted/castellated with MJ thread, self-locking, corrosionresisting steel, classification: 1100 MPa/120 C; Inactive for new design Subsector T03: ROAD VEHICLES Subsector : T03 Registration Date : ASI Austria ID : / , , ÖNORM V 5090 Road vehicles - Testing procedure of visual driver distraction by interaction with transport information and control systems (TICS) inside the vehicle This ÖNORM provides a testing procedure to measure and evaluate visual driver distraction of a driver from the driving task when interacting with transport information and control systems (TICS) inside the vehicle. The ÖNORM refers tot he interaction od a driver with functions of a TICS while driving on a test track. Moreover, the ÖNORM provides threshold

55 Page 54 values, which have to be complied by the TICS in order to fulfill the requirements of this ÖNORM. The testing procedure is applicable for vehicles classified M1 and N1 (according to 3, KFG 1967). Subsector T19: ROAD SAFETY Subsector : T19 Registration Date : UNE Spain Latest Date for Comments : ID : P /0003 Draft for public enquiry PNE Road traffic management equipment. Air monitoring stations on roads. Part 1: Functional characteristics. This standard defines function requirements to be fulfilled by environmental parameters analyser systems, within Environmental Stations on Roads. These stations will be installed on roads for monitoring environmental quality information in order to assess road traffic effects on it. Subsector : T19 Registration Date : UNE Spain Latest Date for Comments : ID : P /0003 Draft for public enquiry PNE Road traffic management equipment. Air monitoring stations on roads. Part 2: Application protocol This standard describes the Communications Protocol employed between URS (Universal Remote Station) and Environmental Stations on Roads (ESR; EMAC in Spanish). This description covers from physical level to application level. ESR are considered to be URS periphery Subsector : T19 Registration Date : UNE Spain Latest Date for Comments : ID : P /0003 Draft for public enquiry PNE Road traffic management equipment. Air monitoring stations on roads. Part 3: Equipment This standard defines units and principles of measure, power supply and consumption,

56 technical characteristics, scope, installation conditions and connections of environmental parameters analyser systems to be placed on roads for monitoring environmental quality information in order to assess road traffic effects on it Page 55 Subsector T20: TRAM- AND RAILWAY ENGINEERING Subsector : T20 Registration Date : AFNOR France ID : /0001 NF F Rolling stock - Composite panels with decorated or protected faces Subsector : T20 Registration Date : AFNOR France ID : /0001 NF F Matériel roulant ferroviaire - Revêtements de sol en caoutchouc Subsector : T20 Registration Date : UNI Italy ID : / , UNI Railway cycles- Technical and construction requirements This standard defines the technical and constructive requirements related to "ferrocicli" railway cycles moved by muscular propulsion eventually integrated by electric assistance, authorized to travel on the railway infrastructures which are not used anymore for public transportation. The railway cycles can move individually or in convoy formation and are used for the carriage of persons, even with reduced mobility, the transportation of luggage and/or cargo or other specific uses.

57 ** End of Sector ** Page 56

58 List of non-electrotechnical subsectors Sector A: Services Subsector Title ISO/TC CEN/TC reference reference A01 Tourist services / 329; CEN/WS ETO A02 Cleaning services / 328 A03 Postal services / 331 A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM A05 Maintenance services / 319 A06 Building and construction services / 330 A07 Translation services / A08 Funeral services / CEN/BT/TF 139 A09 Facility management / 348 A10 Services of Real Estate Agents / CEN/BT/TF 180; 373 A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4 A12 Consultancy Services / 395; 381 A13 Expertise Services / 405 A14 Aesthetic Services / 403;409 A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404

59 Sector B: Building and construction Subsector Title ISO/TC CEN/TC reference reference B01 Fire protection 21 70; 72; 191; 192 B02 Structures 59; ; 167; 250; 277; 346; 349; 284; 288; 297; 340 B03 Concrete ; CEN/WS 009 B04 Cement 74; B05 Fire tests B06 Gypsum / 241 B07 Glass B08 Doors and windows B09 Thermal matters ; 89; 371; CEN/BT WG 173; CEN/WS 036 B10 Timber structures B11 Metal structures B12 Masonry 179; ; 246 B13 Solar energy B14 Geotechnics ; 396 B15 Sanitary appliances / 163; 7 B16 Taps / / B17 Lighting equipment and lighting / 50; 169 application technology B18 Scaffolding / 53 B19 Ceramic tiles B20 Drainage equipment / 165 B21 Baths / / B22 Wallcoverings / 99 B23 District heating / 107 B24 Auxiliary and handicraft work / / B25 Gas distribution installation and / 234; 235; 282 related equipment B26 Road building and maintenance / 178; 227 B27 Waterproofing materials / 128; 254; 361; 314 B28 Floor coverings 38/SC B29 Aggregates / 154 B30 Floor and surfacing / 217; 303; 323; 390 B31 Heating systems in buildings / 228; 247 B32 Precast concrete products / 177; 229

60 B33 Building design ; 325; 388 B34 Building and construction Environmental aspect 350; 351 B99 Undetermined / /

61 Sector C: Chemicals, chemical engineering and food products Subsector Title ISO/TC CEN/TC reference reference C01 Food products ; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054 C02 Paints and related products ; 298; 173 C03 Chemistry ; 363 C04 Laboratory glassware C05 Lac / / C06 Essential oils 54 / C08 Pesticides 81 / C09 Surfactants C10 Starch 93 / C11 Tobacco C12 Glass plant / / C13 Fertilizers ; 260 C16 Wood preservatives / / C17 Trees and plants / / C18 Adhesives / 193 C19 Chemical analysis 201; ; 347 C20 Explosives and firework / 212; 321 C21 Cosmetics C22 Bio-Based products / 411 C99 Undetermined / 386

62 Sector F: Fundamental standards Subsector Title ISO/TC CEN/TC reference reference F01 Technical drawings 10 / F02 Units & symbols 12 / F03 Preferred numbers 19 / F04 Sieves 24 / F05 Measuring instruments 30; ; 171; 176; 237; F06 Terminology principles 37 / 294; 318; 244; 367; 141; CEN/WS 011 F07 Documentation and information ; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS F08 Surfaces / 290 F09 Banking 68 / F10 Statistics 69 / F12 Information processing systems ; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365 F13 Environmental tests / / F14 Graphical technology, 130 / sign-boards and nameplates F15 Material testing in general ; CEN/WS 007 CEN/WS 021 CEN/WS 033 F16 Graphical symbols 145 / F17 Administrative documents 154 CEN/WS MMU F18 Micrographics 171 / F19 Optics 172; ; 170 F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS F21 Value analysis and project / 279 network F22 Logistics / 379; 273 F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;

63 CEN/CLC/JWG 3; CEN/CLC/JWG 4; CEN/WS 027 F99 Undetermined / 389; CEN/WS 057; CEN/WS 058; CEN/WS 060

64 Sector H: Products for household and leisure use Subsector Title ISO/TC CEN/TC reference reference H01 Cinematography H02 Photography 42 / H03 Consumer questions / 291 H04 Sports equipment H05 Oil and gas burners / 47; 131 H06 Horology 114 / H07 Space heating ; 110; 130; 179; 180 H08 Sizing systems 133; 137 / H09 Furniture H10 Sewing machines 148 / H11 Heater controls H12 Ceramic and glass-ware for food 166 / H13 Jewellery 174 CEN/WS 047 H14 Caravans H15 Toys H17 Oil stoves / 46 H18 Central heating boilers / 48; 57; 109; 269 H19 Non-electric cookers and barbecues / 49; 281; 295 H22 Smokers lighters and matches / 355; 87 H23 Ladders / 93 H24 Tactile danger warnings / / H25 Large gas appliances / 106; CEN/CLC/JWG FCGA H26 Sealing materials / 108; 208 H27 Educational equipment / / H28 Hunting 191 / H29 Heat pumps / 113 H30 Equipment for children / 252 H31 Dedicated LPG appliances / 181 H32 Culinary utensils H33 Footwear (excluding protective / 309 footwear) H34 Child safety / CEN/BT/WG H99 Undetermined / 299; 364; 369; 402

65 Sector I: Mechanical engineering Subsector Title ISO/TC CEN/TC reference reference I01 Screw threads 1 / I02 Fasteners I03 Limits & fits / / I04 Rolling bearings 4 / I05 Iron pipes I06 Pressure vessels I07 Shafts 14 / I08 Agricultural machines , 334 I09 Small tools I10 Splines / / I11 Machine tools ; 143; 145; 255 I12 Pulleys & belts I13 Gas containers 58 23; 286 I14 Gears 60 / I15 Equipment for petroleum industry I16 Internal combustion engines 70; I17 Machinery in general 72; ; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025 I18 Mining I19 Nuclear energy 85 / I20 Refrigeration 86 44; 182 I21 Chains and chain wheels 100 / I22 Vacuum technology 112 / I23 Pumps I24 Industrial fans I25 Compressors I26 Plain bearings 123 / I27 Earth moving and construction 127; equipment I28 Fluid power 131 / I29 Gas cleaning / 195 I30 Air distribution / 156 I31 Valves 153; ; 236; 105 I32 Flanges / 74 I33 Information processing in automation I34 Non-ferrous metallic pipes / /

66 I35 Leisure and recreational machines / 152 I36 Thermoprocessing technology / 186 I37 Printing and paper machines / 198 I38 Leather production, tannery and / 200; 201 related machinery I39 Machines for metal processing / 202; 322 I40 Industrial piping networks / 267 I41 Membrane filters / 272 I42 Potentially explosive atmospheres / 305 I43 Hydrogen energy 197 / I44 Nanotechnologies I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059

67 Sector M: Metallic materials Subsector Title ISO/TC CEN/TC reference reference M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110 M02 Zinc / 209 M03 Foundry technology, ; ECISS/TC 31 ECISS/TC 111 including cast iron M04 Copper M05 Welding M06 Dimensions of wrought products / / M07 Manganese and chromium 65 / M08 Light alloys M09 Iron ores 102 / M10 Metallic coatings M11 Powder metallurgy 119 / M12 Aluminium ores 129 / M13 Ferroalloys 132 / M14 Nickel 155 / M15 Metallic corrosion ; 219

68 M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101 M17 Heavy metal ores 183 / M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407 M20 Tin and tin alloys / 220 M21 Precious metals / 283 M22 Lead and lead alloys / 306 M99 Undetermined / /

69 Sector N: Non-metallic materials Subsector Title ISO/TC CEN/TC reference reference N01 Paper and board N02 Solid fuels ; 343;383; CEN/WS 019 N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061 N04 Refractories N05 Textiles ; 248 N06 Rubber ; 366 CEN/WS 003 N07 Sawn timber 55 38; 175 N08 Mica / / N09 Plastics N10 Cork 87 / N11 Wood-based panels N12 Timber products 99 / N13 Leather N14 Plastics pipes N17 Fluorspar 175 / N18 Glass-fibre reinforced plastics / / N19 Tapes / 253 N20 Ceramics N21 Gaseous fuels and combustible gas 158; ; 408 N22 Feather and related materials / 222 N23 Diamond / 410 N99 Undetermined / /

70 Sector S: Health, environment and medical equipment Subsector Title ISO/TC CEN/TC reference reference S01 Acoustics and sound ; 211 insulation S02 Transfusion equipment 76 / S03 Syringes 84 / S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043 S05 Dentistry S06 Vibration & shock S07 Anaesthetic and respiratory equipment S08 Air quality ; 243; 264; CEN/CLC/JWG CMI S09 Water quality and water supply ; 230; CEN/WS 001 CEN/WS 034 S10 Surgical implants ; CEN/CLC/JWG AIMD S11 Contraceptives 157 / S12 Gas analysis / / S13 Ergonomics S14 Prosthetics 168 / S15 Surgical instruments 170 / S16 Aids for the disabled S17 Respiratory protective devices / 79 S18 Sterilization of equipment ; 204 S19 First aid equipment and rescue systems / 239 S20 Waste collection, handling and / 183 transportation S21 Laboratory medicine, clinical ; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055 S22 Energy saving / CEN/WS 005 CEN/WS 015 S23 Personal & property protection against aggression/burglary protection / 263 S24 Soil quality ; CEN/WS 032

71 S25 Chemical disinfectants and / 216 antiseptics S26 Environmental management 207 CEN/TC 406; CEN/WS 040 S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120 S28 Demining / CEN/WS 029 CEN/WS 013 S99 Undetermined / 205; CEN/BT/TF ; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020

72 Sector T: Transport, mechanical handling and packaging Subsector Title ISO/TC CEN/TC reference reference T01 Shipbuilding and maritime 8; ; 300 structures T02 Aerospace ; AECMA; ECSS ;377 T03 Road vehicles ; 326 CEN/WS IMA T04 Tyres 31 / T05 Pallets 51 / T06 Metal and plastic containers ; 221; 265; 266; 268; T07 Glass containers 63 / T08 Cranes T09 Materials handling and ; 149 storage equipment T10 Freight containers ; 280 T11 Steel wire ropes 105 / T12 Industrial trucks ; 324 T13 Lifting chains, hooks and ropes T14 Packaging ; 120 T15 Cycles T16 Lifts & escalators ; 242 T17 Builders hoists / / T18 Elevating platforms / 98 T19 Road safety / 226; 339 T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR T21 Packaging machines / 146 T22 Off-road vehicles / 354 T99 Undetermined / CEN/WS TAF

73 Sector Z: Information technology Subsector Title ISO/TC CEN/TC Z01 Radiocommunication for IT / / Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI Z03 Common O.S.I. activities / CEN/CLC - EWOS Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;

74 CEN/WS XFS; CEN/WS XML; CEN/WS ego; CEN/WS ein; CEN/WS epr

75 REGISTER OF NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER SUBSECTORS IN THE SCOPE OF CENELEC April 2017 Issued on : 8 May 2017

76 Page 1 Information Procedure on Standards Notifications registered at CCMC during April 2017 Sector U : GENERAL ELECTROTECHNICAL STANDARDS Register issued on : 8 May 2017

77 Subsector U01: INFORMATION STRUCTURES, DOCUMENTATION AND GRAPHICAL SYMBOLS Page 2 Subsector : U01 Registration Date : DIN Germany ID : / Identification of pipelines according to the fluid conveyed Subsector : U01 Registration Date : DIN Germany ID : / Identification of pipelines according to the fluid conveyed Subsector U08: ELECTRIC WELDING Subsector : U08 Registration Date : AFNOR France ID : /0001 PR NF A Resistance welding - Transformers to be embarked on a robot - Particular specifications Subsector : U08 Registration Date : AFNOR France ID : /0001 PR NF A Resistance welding - Transformers to be embarked on a robot - Particular specifications

78 Subsector U12: RELIABILITY Page 3 Subsector : U12 Registration Date : AFNOR France ID : /0001 PR XP C Collecte et Exploitation du Retour d Expérience en Sûreté de Fonctionnement des équipements et équipements Subsector : U12 Registration Date : AFNOR France ID : /0001 PR XP C Collecte et Exploitation du Retour d Expérience en Sûreté de Fonctionnement des équipements et équipements Subsector U99: UNDETERMINED Subsector : U99 Registration Date : DIN Germany ID : / Entertainment technology - Fastening points and fixtures for devices Subsector : U99 Registration Date : DIN Germany ID : / Entertainment technology - Fastening points and fixtures for devices

79 Page 4 ** End of Sector **

80 Page 5 Information Procedure on Standards Notifications registered at CCMC during April 2017 Sector V : ELECTRONIC ENGINEERING Register issued on : 8 May 2017

81 Subsector V02: ELECTRICAL MEASURING EQUIPMENT Page 6 Subsector : V02 Registration Date : DIN Germany ID : / Electronic plug-in electricity meters (ehz) ** End of Sector **

82 Page 7 Information Procedure on Standards Notifications registered at CCMC during April 2017 Sector W : ELECTRICAL ENGINEERING Register issued on : 8 May 2017