SC315 RECTANGULAR RAPID FLASHING BEACON. MUTCD-compliant, pedestrian-activated warning beacon for uncontrolled marked crosswalks
|
|
- Richard Lucas
- 5 years ago
- Views:
Transcription
1 SC315 RECTANGULAR RAPID FLASHING BEACON MUTCD-compliant, pedestrian-activated warning beacon for uncontrolled marked crosswalks Item 11-1 Solar Powered With Two Light Bars, 50 Watt Solar Panel, 35 Ahr Battery & Flasher Controller (Less Pushbutton, Pole, & Sign Face) Improve pedestrian safety by increasing driver yield rates Passive activation: microwave-based sensor detects pedestrian Audible push button station Solar power performance even in partially shaded applications Solar and AC-powered models wirelessly communicate and can be used together in the same application Meets and exceeds MUTCD requirements, including IA-21 RRFBs have been found to provide vehicle yielding rates between 72 and 96 percent for crosswalk applications, including 4 lane roadways with average daily traffic (ADT) exceeding 12,000*. Superior Design and Technology The SC315 is a cabinet-based system with a separate, high-power solar panel. This design enables the SC315 to work with audible push button stations, passive activation sensors, and remote monitoring, as well as operate at higher intensities and increased activations in challenging environments. MUTCD interim approval IA-21 flash pattern and multiple configurations enable the SC315 to handle all crosswalk applications. Easy Installation All components, including the battery or AC power supply, Energy Management System (EMS) and optional audible push button controller are housed in a compact, lockable, purpose-built enclosure. It also incorporates a wire routing and termination system, and all components are wired at the factory for an efficient installation. Advanced User-Interface The SC315 comes with an on-board user interface for quick configuration and status monitoring. It allows for simple in-the-field adjustment of flash pattern, duration, intensity, ambient auto adjust, night dimming, and many more. Settings are automatically sent wirelessly to all units in the system. Compatibility Compatible with Carmanah RRFBs and the R820-E, R820-F, and R820-G circular beacons. Interchange solar and AC power models within the same application. Trusted With thousands of installations, Carmanah s beacons are the benchmark in traffic applications and other transportation applications worldwide. * U.S. Department of Transportation Federal Highways Administration, Publication No. FHWA-HRT Effects of Yellow Rectangular Rapid-Flashing Beacons on Yielding at Multilane Uncontrolled Crosswalks WE SIMPLIFY PLANNING. Contact us to get your Energy Balance Report and purchase specifications traffic@carmanah.com carmanahtraffic.com
2 SC315 RECTANGULAR RAPID FLASHING BEACON CABINET DIMENSIONS Side View 19.5 (49.5 cm) 6.5 (16.5 cm) SOLAR PANEL MOUNTING Uni-directional Configuration Front View 4.5 Diameter Round Top of Pole Mount (50 W and 80 W panels) 21.2 (50W) / 31.0 (80 W) (538 mm / 787 mm) LIGHT BAR CONFIGURATION IN-THE-FIELD AIMING 10.5 (26.7 cm) 20.0 (508 mm) (80 W) 10.0 (254 mm) Top of pole to bottom of panel 3D View Side of Pole Mount (20 W, 50 W, and 80 W panels) 14.0 (20W) / 21.2 (50 W) (356 mm / 538 mm) Bi-directional Configuration Rotate the light bar towards the incoming vehicle lane, independent of the wire hole location (432 mm) (50 W) Specifications subject to local environmental conditions, and may be subject to change. All Carmanah products are manufactured in facilities that are certified to ISO quality standards. US Patent No 6,573,659, Other patents pending. Carmanah and Carmanah logo are trademarks of Carmanah Technologies Corp. 2018, Carmanah Technologies Corp. Document: SPEC_TRA_SC315_RevO On-Board User Interface (OBUI) Optical Connectivity Power System Energy Collection Energy Storage Cabinet Construction Environmental Activation Warranty Adjustable system settings with auto-scrolling LED display on our latest EMS System test, status, and fault detection: battery, solar, button, beacon, radio, day/night Flash patterns: RFB1 (WW+S), RFB2 (WSDOT), 0.5 sec. alternating (MUTCD), 0.5 sec. unison (MUTCD), 0.1 sec. unison, 0.25 sec. unison, 0.1 sec. x3 quick flashes unison, 0.1 sec. x3 quick flashes alternating Input: momentary for push button activation, normally open switch, normally closed switch Flash duration: 5 sec. to 1 hr. Intensity setting: 20 to 1400 ma for multiple RRFBs, circular beacons, or LED enhanced signs Nighttime dimming: 10 to 100% of daytime intensity Ambient Auto Adjust: increases intensity during bright daytime Automatic Light Control: reduces intensity if the battery is extremely low Temperature correction: yellow or red beacons Calendar: internal time clock function Radio settings: enable/disable, selectable channel from 1 to 14 Output: enabled when beacons flashing daytime and nighttime, or nighttime only Activation counts and data reporting via OBUI or optional USB connection MUTCD interim approval IA-21 and MUTCDC compliant Purpose-built light bar optics = maximum efficiency and no stray light Exceeds SAE J595 class 1 intensity by 2.5 to 3x when used as recommended Meets SAE J578 chromaticity 3 in (76 mm) x 7 in (178 mm) clear, UV-rated polycarbonate lens with yellow LEDs High-power LEDs: +90% lumen maintenance (L90) based on IES LM-80 Side-emitting pedestrian confirmation LEDs Independent, stainless steel mounting brackets make back-to-back installation simple and enable in-field aiming for maximum effectiveness Yellow, black, or green powder coated light bar covers Encrypted, wireless radio with 2.4 GHz mesh technology Wireless update of settings from any unit to all systems on the same radio channel User-selectable multiple channels to group different beacons and ensure a robust wireless signal Communicates with all other Gen III radio-enabled systems including our R820-E, -F, and -G circular beacons Instantaneous wireless activation: <150 ms Wireless range: 1000 ft (305 m) Integrated, vandal-proof antenna Solar or AC-powered AC: VAC input, 6-14 AWG Replaceable AC-DC power supply, circuit breaker, terminal block wiring 20, 50, or 80 W high-efficiency photovoltaic solar panel 45 deg tilt for optimal energy collection Maximum Power Point Tracking with Temperature Compensation (MPPT-TC) battery charger for optimal energy collection in all solar and battery conditions 12 V battery system with multiple sizes: 33, 35 Ahr. Replaceable, recyclable, sealed, maintenance-free, best-in-class AGM batteries offer the widest temperature range and longest life Battery design life: +5 yrs. Tool-less battery change with quick connect terminals and strapping for easy installation Weatherproof, gasketed enclosure with vents for ambient air transfer (NEMA 3R) Lockable, hinged door Corrosion-resistant aluminum with stainless steel hardware Raw aluminum finish or yellow, black, or green powder coated Prewired to minimize installation time High-efficiency optics and EMS = the most compact, lightweight system -40 to 165 F (-40 to 74 C) system operating temperature -40 to 162 F (-40 to 72 C) battery operating temperature 150 mph (241 kph) wind speed as per AASHTO LTS-6 Push button: ADA-compliant, piezo-driven with visual LED and two-tone audible confirmation Audible push button station: ADA-compliant, piezo-driven with visual LED and customizeable voice message confirmation Passive activation: microwave-based sensor detects pedestrian 5-year limited warranty
3 SC315 RECTANGULAR RAPID FLASHING BEACON MUTCD-compliant, pedestrian-activated warning beacon for uncontrolled marked crosswalks Item 11-2 Solar Powered With One Light Bar, 50 Watt Solar Panel, 35 AHr Battery And Flasher Controller (Less Pushbutton, Pole, & Sign Face) Improve pedestrian safety by increasing driver yield rates Passive activation: microwave-based sensor detects pedestrian Audible push button station Solar power performance even in partially shaded applications Solar and AC-powered models wirelessly communicate and can be used together in the same application Meets and exceeds MUTCD requirements, including IA-21 RRFBs have been found to provide vehicle yielding rates between 72 and 96 percent for crosswalk applications, including 4 lane roadways with average daily traffic (ADT) exceeding 12,000*. Superior Design and Technology The SC315 is a cabinet-based system with a separate, high-power solar panel. This design enables the SC315 to work with audible push button stations, passive activation sensors, and remote monitoring, as well as operate at higher intensities and increased activations in challenging environments. MUTCD interim approval IA-21 flash pattern and multiple configurations enable the SC315 to handle all crosswalk applications. Easy Installation All components, including the battery or AC power supply, Energy Management System (EMS) and optional audible push button controller are housed in a compact, lockable, purpose-built enclosure. It also incorporates a wire routing and termination system, and all components are wired at the factory for an efficient installation. Advanced User-Interface The SC315 comes with an on-board user interface for quick configuration and status monitoring. It allows for simple in-the-field adjustment of flash pattern, duration, intensity, ambient auto adjust, night dimming, and many more. Settings are automatically sent wirelessly to all units in the system. Compatibility Compatible with Carmanah RRFBs and the R820-E, R820-F, and R820-G circular beacons. Interchange solar and AC power models within the same application. Trusted With thousands of installations, Carmanah s beacons are the benchmark in traffic applications and other transportation applications worldwide. * U.S. Department of Transportation Federal Highways Administration, Publication No. FHWA-HRT Effects of Yellow Rectangular Rapid-Flashing Beacons on Yielding at Multilane Uncontrolled Crosswalks WE SIMPLIFY PLANNING. Contact us to get your Energy Balance Report and purchase specifications traffic@carmanah.com carmanahtraffic.com
4 SC315 RECTANGULAR RAPID FLASHING BEACON CABINET DIMENSIONS Side View 19.5 (49.5 cm) 6.5 (16.5 cm) SOLAR PANEL MOUNTING Uni-directional Configuration Front View 4.5 Diameter Round Top of Pole Mount (50 W and 80 W panels) 21.2 (50W) / 31.0 (80 W) (538 mm / 787 mm) LIGHT BAR CONFIGURATION IN-THE-FIELD AIMING 10.5 (26.7 cm) 20.0 (508 mm) (80 W) 10.0 (254 mm) Top of pole to bottom of panel 3D View Side of Pole Mount (20 W, 50 W, and 80 W panels) 14.0 (20W) / 21.2 (50 W) (356 mm / 538 mm) Bi-directional Configuration Rotate the light bar towards the incoming vehicle lane, independent of the wire hole location (432 mm) (50 W) Specifications subject to local environmental conditions, and may be subject to change. All Carmanah products are manufactured in facilities that are certified to ISO quality standards. US Patent No 6,573,659, Other patents pending. Carmanah and Carmanah logo are trademarks of Carmanah Technologies Corp. 2018, Carmanah Technologies Corp. Document: SPEC_TRA_SC315_RevO On-Board User Interface (OBUI) Optical Connectivity Power System Energy Collection Energy Storage Cabinet Construction Environmental Activation Warranty Adjustable system settings with auto-scrolling LED display on our latest EMS System test, status, and fault detection: battery, solar, button, beacon, radio, day/night Flash patterns: RFB1 (WW+S), RFB2 (WSDOT), 0.5 sec. alternating (MUTCD), 0.5 sec. unison (MUTCD), 0.1 sec. unison, 0.25 sec. unison, 0.1 sec. x3 quick flashes unison, 0.1 sec. x3 quick flashes alternating Input: momentary for push button activation, normally open switch, normally closed switch Flash duration: 5 sec. to 1 hr. Intensity setting: 20 to 1400 ma for multiple RRFBs, circular beacons, or LED enhanced signs Nighttime dimming: 10 to 100% of daytime intensity Ambient Auto Adjust: increases intensity during bright daytime Automatic Light Control: reduces intensity if the battery is extremely low Temperature correction: yellow or red beacons Calendar: internal time clock function Radio settings: enable/disable, selectable channel from 1 to 14 Output: enabled when beacons flashing daytime and nighttime, or nighttime only Activation counts and data reporting via OBUI or optional USB connection MUTCD interim approval IA-21 and MUTCDC compliant Purpose-built light bar optics = maximum efficiency and no stray light Exceeds SAE J595 class 1 intensity by 2.5 to 3x when used as recommended Meets SAE J578 chromaticity 3 in (76 mm) x 7 in (178 mm) clear, UV-rated polycarbonate lens with yellow LEDs High-power LEDs: +90% lumen maintenance (L90) based on IES LM-80 Side-emitting pedestrian confirmation LEDs Independent, stainless steel mounting brackets make back-to-back installation simple and enable in-field aiming for maximum effectiveness Yellow, black, or green powder coated light bar covers Encrypted, wireless radio with 2.4 GHz mesh technology Wireless update of settings from any unit to all systems on the same radio channel User-selectable multiple channels to group different beacons and ensure a robust wireless signal Communicates with all other Gen III radio-enabled systems including our R820-E, -F, and -G circular beacons Instantaneous wireless activation: <150 ms Wireless range: 1000 ft (305 m) Integrated, vandal-proof antenna Solar or AC-powered AC: VAC input, 6-14 AWG Replaceable AC-DC power supply, circuit breaker, terminal block wiring 20, 50, or 80 W high-efficiency photovoltaic solar panel 45 deg tilt for optimal energy collection Maximum Power Point Tracking with Temperature Compensation (MPPT-TC) battery charger for optimal energy collection in all solar and battery conditions 12 V battery system with multiple sizes: 33, 35 Ahr. Replaceable, recyclable, sealed, maintenance-free, best-in-class AGM batteries offer the widest temperature range and longest life Battery design life: +5 yrs. Tool-less battery change with quick connect terminals and strapping for easy installation Weatherproof, gasketed enclosure with vents for ambient air transfer (NEMA 3R) Lockable, hinged door Corrosion-resistant aluminum with stainless steel hardware Raw aluminum finish or yellow, black, or green powder coated Prewired to minimize installation time High-efficiency optics and EMS = the most compact, lightweight system -40 to 165 F (-40 to 74 C) system operating temperature -40 to 162 F (-40 to 72 C) battery operating temperature 150 mph (241 kph) wind speed as per AASHTO LTS-6 Push button: ADA-compliant, piezo-driven with visual LED and two-tone audible confirmation Audible push button station: ADA-compliant, piezo-driven with visual LED and customizeable voice message confirmation Passive activation: microwave-based sensor detects pedestrian 5-year limited warranty
5 SC315 RECTANGULAR RAPID FLASHING BEACON Item 11-3 AC Powered With Two Light Bars And Flasher Controller (Less Pushbutton, Pole And Sign Face) MUTCD-compliant, pedestrian-activated warning beacon for uncontrolled marked crosswalks Improve pedestrian safety by increasing driver yield rates Passive activation: microwave-based sensor detects pedestrian Audible push button station Solar power performance even in partially shaded applications Solar and AC-powered models wirelessly communicate and can be used together in the same application Meets and exceeds MUTCD requirements, including IA-21 RRFBs have been found to provide vehicle yielding rates between 72 and 96 percent for crosswalk applications, including 4 lane roadways with average daily traffic (ADT) exceeding 12,000*. Superior Design and Technology The SC315 is a cabinet-based system with a separate, high-power solar panel. This design enables the SC315 to work with audible push button stations, passive activation sensors, and remote monitoring, as well as operate at higher intensities and increased activations in challenging environments. MUTCD interim approval IA-21 flash pattern and multiple configurations enable the SC315 to handle all crosswalk applications. Easy Installation All components, including the battery or AC power supply, Energy Management System (EMS) and optional audible push button controller are housed in a compact, lockable, purpose-built enclosure. It also incorporates a wire routing and termination system, and all components are wired at the factory for an efficient installation. Advanced User-Interface The SC315 comes with an on-board user interface for quick configuration and status monitoring. It allows for simple in-the-field adjustment of flash pattern, duration, intensity, ambient auto adjust, night dimming, and many more. Settings are automatically sent wirelessly to all units in the system. Compatibility Compatible with Carmanah RRFBs and the R820-E, R820-F, and R820-G circular beacons. Interchange solar and AC power models within the same application. Trusted With thousands of installations, Carmanah s beacons are the benchmark in traffic applications and other transportation applications worldwide. * U.S. Department of Transportation Federal Highways Administration, Publication No. FHWA-HRT Effects of Yellow Rectangular Rapid-Flashing Beacons on Yielding at Multilane Uncontrolled Crosswalks WE SIMPLIFY PLANNING. Contact us to get your Energy Balance Report and purchase specifications traffic@carmanah.com carmanahtraffic.com
6 SC315 RECTANGULAR RAPID FLASHING BEACON CABINET DIMENSIONS Side View 19.5 (49.5 cm) 6.5 (16.5 cm) SOLAR PANEL MOUNTING Uni-directional Configuration Front View 4.5 Diameter Round Top of Pole Mount (50 W and 80 W panels) 21.2 (50W) / 31.0 (80 W) (538 mm / 787 mm) LIGHT BAR CONFIGURATION IN-THE-FIELD AIMING 10.5 (26.7 cm) 20.0 (508 mm) (80 W) 10.0 (254 mm) Top of pole to bottom of panel 3D View Side of Pole Mount (20 W, 50 W, and 80 W panels) 14.0 (20W) / 21.2 (50 W) (356 mm / 538 mm) Bi-directional Configuration Rotate the light bar towards the incoming vehicle lane, independent of the wire hole location (432 mm) (50 W) Specifications subject to local environmental conditions, and may be subject to change. All Carmanah products are manufactured in facilities that are certified to ISO quality standards. US Patent No 6,573,659, Other patents pending. Carmanah and Carmanah logo are trademarks of Carmanah Technologies Corp. 2018, Carmanah Technologies Corp. Document: SPEC_TRA_SC315_RevO On-Board User Interface (OBUI) Optical Connectivity Power System Energy Collection Energy Storage Cabinet Construction Environmental Activation Warranty Adjustable system settings with auto-scrolling LED display on our latest EMS System test, status, and fault detection: battery, solar, button, beacon, radio, day/night Flash patterns: RFB1 (WW+S), RFB2 (WSDOT), 0.5 sec. alternating (MUTCD), 0.5 sec. unison (MUTCD), 0.1 sec. unison, 0.25 sec. unison, 0.1 sec. x3 quick flashes unison, 0.1 sec. x3 quick flashes alternating Input: momentary for push button activation, normally open switch, normally closed switch Flash duration: 5 sec. to 1 hr. Intensity setting: 20 to 1400 ma for multiple RRFBs, circular beacons, or LED enhanced signs Nighttime dimming: 10 to 100% of daytime intensity Ambient Auto Adjust: increases intensity during bright daytime Automatic Light Control: reduces intensity if the battery is extremely low Temperature correction: yellow or red beacons Calendar: internal time clock function Radio settings: enable/disable, selectable channel from 1 to 14 Output: enabled when beacons flashing daytime and nighttime, or nighttime only Activation counts and data reporting via OBUI or optional USB connection MUTCD interim approval IA-21 and MUTCDC compliant Purpose-built light bar optics = maximum efficiency and no stray light Exceeds SAE J595 class 1 intensity by 2.5 to 3x when used as recommended Meets SAE J578 chromaticity 3 in (76 mm) x 7 in (178 mm) clear, UV-rated polycarbonate lens with yellow LEDs High-power LEDs: +90% lumen maintenance (L90) based on IES LM-80 Side-emitting pedestrian confirmation LEDs Independent, stainless steel mounting brackets make back-to-back installation simple and enable in-field aiming for maximum effectiveness Yellow, black, or green powder coated light bar covers Encrypted, wireless radio with 2.4 GHz mesh technology Wireless update of settings from any unit to all systems on the same radio channel User-selectable multiple channels to group different beacons and ensure a robust wireless signal Communicates with all other Gen III radio-enabled systems including our R820-E, -F, and -G circular beacons Instantaneous wireless activation: <150 ms Wireless range: 1000 ft (305 m) Integrated, vandal-proof antenna Solar or AC-powered AC: VAC input, 6-14 AWG Replaceable AC-DC power supply, circuit breaker, terminal block wiring 20, 50, or 80 W high-efficiency photovoltaic solar panel 45 deg tilt for optimal energy collection Maximum Power Point Tracking with Temperature Compensation (MPPT-TC) battery charger for optimal energy collection in all solar and battery conditions 12 V battery system with multiple sizes: 33, 35 Ahr. Replaceable, recyclable, sealed, maintenance-free, best-in-class AGM batteries offer the widest temperature range and longest life Battery design life: +5 yrs. Tool-less battery change with quick connect terminals and strapping for easy installation Weatherproof, gasketed enclosure with vents for ambient air transfer (NEMA 3R) Lockable, hinged door Corrosion-resistant aluminum with stainless steel hardware Raw aluminum finish or yellow, black, or green powder coated Prewired to minimize installation time High-efficiency optics and EMS = the most compact, lightweight system -40 to 165 F (-40 to 74 C) system operating temperature -40 to 162 F (-40 to 72 C) battery operating temperature 150 mph (241 kph) wind speed as per AASHTO LTS-6 Push button: ADA-compliant, piezo-driven with visual LED and two-tone audible confirmation Audible push button station: ADA-compliant, piezo-driven with visual LED and customizeable voice message confirmation Passive activation: microwave-based sensor detects pedestrian 5-year limited warranty
7 SC315 RECTANGULAR RAPID FLASHING BEACON Item 11-4 AC Powered With One Light Bar And Flasher Controller (Less Pushbutton, Pole And Sign Face) MUTCD-compliant, pedestrian-activated warning beacon for uncontrolled marked crosswalks Improve pedestrian safety by increasing driver yield rates Passive activation: microwave-based sensor detects pedestrian Audible push button station Solar power performance even in partially shaded applications Solar and AC-powered models wirelessly communicate and can be used together in the same application Meets and exceeds MUTCD requirements, including IA-21 RRFBs have been found to provide vehicle yielding rates between 72 and 96 percent for crosswalk applications, including 4 lane roadways with average daily traffic (ADT) exceeding 12,000*. Superior Design and Technology The SC315 is a cabinet-based system with a separate, high-power solar panel. This design enables the SC315 to work with audible push button stations, passive activation sensors, and remote monitoring, as well as operate at higher intensities and increased activations in challenging environments. MUTCD interim approval IA-21 flash pattern and multiple configurations enable the SC315 to handle all crosswalk applications. Easy Installation All components, including the battery or AC power supply, Energy Management System (EMS) and optional audible push button controller are housed in a compact, lockable, purpose-built enclosure. It also incorporates a wire routing and termination system, and all components are wired at the factory for an efficient installation. Advanced User-Interface The SC315 comes with an on-board user interface for quick configuration and status monitoring. It allows for simple in-the-field adjustment of flash pattern, duration, intensity, ambient auto adjust, night dimming, and many more. Settings are automatically sent wirelessly to all units in the system. Compatibility Compatible with Carmanah RRFBs and the R820-E, R820-F, and R820-G circular beacons. Interchange solar and AC power models within the same application. Trusted With thousands of installations, Carmanah s beacons are the benchmark in traffic applications and other transportation applications worldwide. * U.S. Department of Transportation Federal Highways Administration, Publication No. FHWA-HRT Effects of Yellow Rectangular Rapid-Flashing Beacons on Yielding at Multilane Uncontrolled Crosswalks WE SIMPLIFY PLANNING. Contact us to get your Energy Balance Report and purchase specifications traffic@carmanah.com carmanahtraffic.com
8 SC315 RECTANGULAR RAPID FLASHING BEACON CABINET DIMENSIONS Side View 19.5 (49.5 cm) 6.5 (16.5 cm) SOLAR PANEL MOUNTING Uni-directional Configuration Front View 4.5 Diameter Round Top of Pole Mount (50 W and 80 W panels) 21.2 (50W) / 31.0 (80 W) (538 mm / 787 mm) LIGHT BAR CONFIGURATION IN-THE-FIELD AIMING 10.5 (26.7 cm) 20.0 (508 mm) (80 W) 10.0 (254 mm) Top of pole to bottom of panel 3D View Side of Pole Mount (20 W, 50 W, and 80 W panels) 14.0 (20W) / 21.2 (50 W) (356 mm / 538 mm) Bi-directional Configuration Rotate the light bar towards the incoming vehicle lane, independent of the wire hole location (432 mm) (50 W) Specifications subject to local environmental conditions, and may be subject to change. All Carmanah products are manufactured in facilities that are certified to ISO quality standards. US Patent No 6,573,659, Other patents pending. Carmanah and Carmanah logo are trademarks of Carmanah Technologies Corp. 2018, Carmanah Technologies Corp. Document: SPEC_TRA_SC315_RevO On-Board User Interface (OBUI) Optical Connectivity Power System Energy Collection Energy Storage Cabinet Construction Environmental Activation Warranty Adjustable system settings with auto-scrolling LED display on our latest EMS System test, status, and fault detection: battery, solar, button, beacon, radio, day/night Flash patterns: RFB1 (WW+S), RFB2 (WSDOT), 0.5 sec. alternating (MUTCD), 0.5 sec. unison (MUTCD), 0.1 sec. unison, 0.25 sec. unison, 0.1 sec. x3 quick flashes unison, 0.1 sec. x3 quick flashes alternating Input: momentary for push button activation, normally open switch, normally closed switch Flash duration: 5 sec. to 1 hr. Intensity setting: 20 to 1400 ma for multiple RRFBs, circular beacons, or LED enhanced signs Nighttime dimming: 10 to 100% of daytime intensity Ambient Auto Adjust: increases intensity during bright daytime Automatic Light Control: reduces intensity if the battery is extremely low Temperature correction: yellow or red beacons Calendar: internal time clock function Radio settings: enable/disable, selectable channel from 1 to 14 Output: enabled when beacons flashing daytime and nighttime, or nighttime only Activation counts and data reporting via OBUI or optional USB connection MUTCD interim approval IA-21 and MUTCDC compliant Purpose-built light bar optics = maximum efficiency and no stray light Exceeds SAE J595 class 1 intensity by 2.5 to 3x when used as recommended Meets SAE J578 chromaticity 3 in (76 mm) x 7 in (178 mm) clear, UV-rated polycarbonate lens with yellow LEDs High-power LEDs: +90% lumen maintenance (L90) based on IES LM-80 Side-emitting pedestrian confirmation LEDs Independent, stainless steel mounting brackets make back-to-back installation simple and enable in-field aiming for maximum effectiveness Yellow, black, or green powder coated light bar covers Encrypted, wireless radio with 2.4 GHz mesh technology Wireless update of settings from any unit to all systems on the same radio channel User-selectable multiple channels to group different beacons and ensure a robust wireless signal Communicates with all other Gen III radio-enabled systems including our R820-E, -F, and -G circular beacons Instantaneous wireless activation: <150 ms Wireless range: 1000 ft (305 m) Integrated, vandal-proof antenna Solar or AC-powered AC: VAC input, 6-14 AWG Replaceable AC-DC power supply, circuit breaker, terminal block wiring 20, 50, or 80 W high-efficiency photovoltaic solar panel 45 deg tilt for optimal energy collection Maximum Power Point Tracking with Temperature Compensation (MPPT-TC) battery charger for optimal energy collection in all solar and battery conditions 12 V battery system with multiple sizes: 33, 35 Ahr. Replaceable, recyclable, sealed, maintenance-free, best-in-class AGM batteries offer the widest temperature range and longest life Battery design life: +5 yrs. Tool-less battery change with quick connect terminals and strapping for easy installation Weatherproof, gasketed enclosure with vents for ambient air transfer (NEMA 3R) Lockable, hinged door Corrosion-resistant aluminum with stainless steel hardware Raw aluminum finish or yellow, black, or green powder coated Prewired to minimize installation time High-efficiency optics and EMS = the most compact, lightweight system -40 to 165 F (-40 to 74 C) system operating temperature -40 to 162 F (-40 to 72 C) battery operating temperature 150 mph (241 kph) wind speed as per AASHTO LTS-6 Push button: ADA-compliant, piezo-driven with visual LED and two-tone audible confirmation Audible push button station: ADA-compliant, piezo-driven with visual LED and customizeable voice message confirmation Passive activation: microwave-based sensor detects pedestrian 5-year limited warranty
9 Item EVR Pedestrian Push Button Overview 4 EVR is digitally controlled and virtually vandal proof. Impact resistant from sticks, skateboards, baseball bats, hammers, and similar objects. The 4 EVR utilizes a piezo switch element that cannot be stuck in a constant call. An LED and audible tone provide the pedestrian with feedback that a call has been placed. Feedback options include: Latching LED and audible dee dah tone Momentary LED and audible dee dah tone No LED and Audible dee dah tone New Transient protection exceeds NEMA requirements. The actuator is pressure sensitive and uses no screws or bolts in the functioning areas. Latch Mode Configurations FEATURES Solid state piezo switch Pressure sensitive Actuator will not stick Virtually vandal proof LED and audible tone ADA and MUTCD compliant 5 year warranty Verisys Registrars ISO 9001:2008 Certified The 4 EVR can be configured with latching/momentary or no LED. In the latching mode the pilot light is lit when the call is placed and remains on until the walk display is energized. All pushbuttons on the phase are synchronized. Latching mode requires a PBI-L or PBIC-L. Push Button Isolator: Rack and Shelf PBI provides an isolated input circuit in a number of configurations including Latching or Momentary, 120 VAC or 24 VDC. The PBI mounts anywhere in the traffic cabinet. The PBIC fits into a 170 card file and replaces the existing isolator cards in the rack. One card manages up to four phases and 16 push buttons Campbell Company 450 W. McGregor Boise, ID
10 Visual Audible Latching Mode Tactile Feedback LED Super bright Red Dee 2300 Hz Dah 2000 Hz LED with PBI-L Optional tactile arrow Operating Temperature Operating Life Electrical Specifications Operating Voltage DC VDC Operating Voltage AC VAC On Resistance < 150 ohms Operating Mode Normally Open Closure Dwell 150 ms Maximum Terminal 1.5 V Voltage During Closure Switch Piezo electric, solid state switch Environmental Specifications -40 C to 85 C 300 x 10⁶ Operating Force Actuator size ADA Specifications < 3 lbf 2 inches ABOUT Campbell Company is the leading American manufacturer of pedestrian signal safety products, accessible pedestrian signals (APS) pedestrian push buttons, signs, and hardware. ADDITIONAL INFORMATION More information can be found at: Bezel Actuator Hardware Finish Materials Aluminum Stainless Steel Stainless Steel Powder Coat Form Factor Round 3 OD 4 hole, 2 hole (9-3, 10-2) Rectangular 2.8 x hole, 2 hole Oval 6.8 x hole Color Black, Green, Yellow, Natural Warranty 5 Years Campbell Company 450 W. McGregor Boise, ID Design subject to change without notice.
11 Item 11-8 Description: Materials: Geometry:
12 Item 11-9 Item OMUTCD Legend To Be Specified Upon Order
13 Item Item C D N M E F B J K L G * H A W16-7pL LEFT DIAGONAL ARROW PLAQUE C A B C D E F G H J K L M N * W16-7pR RIGHT DIAGONAL ARROW PLAQUE *See page 6-2 for arrow design. COLORS: SYMBOL BLACK BACKGROUND YELLOW (RETROREFLECTIVE) 2-126
14 Item 11-13
15 Section 11: RRFB Sign Assembly Item thru 11-18
16 Item 11-19
17
18
19 Item Length: 14'
20 Item " - 12" Passed Threads
MODELR HOUR SOLAR LED FLASHING BEACON REPRESENTED IN YOUR REGION BY: ODOT ITB Section 8: Solar Equipment Item 8-1
ODOT ITB 063-18 Section 8: Solar Equipment Item 8-1 MODELR247 24-HOUR SOLAR LED FLASHING BEACON Typical Applications: Warning signs Stop signs Improves Safety Flashes 24 hours per day, 365 days per year
More informationGeneral Specifications for Lighted Crosswalk Warning Equipment and Miscellaneous Materials, Rev 4
General Specifications for Lighted Crosswalk Warning Equipment and Miscellaneous Materials, Rev 4 Lighted Crosswalk Warning Equipment and Miscellaneous Materials 1) Quality of Materials and Equipment 2)
More informationThe Standard In Safety
The Standard In Safety GAI-TRONICS A Hubbell Company GAI-Tronics, a Hubbell Company, has been a leading manufacturer in the emergency communications industry for over 65 years. Oil rigs, power plants,
More informationAltman Lighting Spectra Cyc UV 50 Specification
1.01 UV CYCLORAMA LIGHTING A. General 1. The fixture shall be a compact, lightweight color-mixing LED asymmetrical wash fixture with 8 or 16 bit DMX control of intensity and color. The fixture shall be
More informationOL10A & OL32 Obstruction Light
OL10A & OL32 Obstruction Light Technical Support: Email: customerservice@carmanah.com Toll Free: 1.877.722.8877 (US & Canada) Worldwide: 1.250.380.0052 Fax: 1.250.380.0062 Web: carmanah.com 2013 Carmanah
More informationSP40S-D. Kingfisher Company, inc. Features: Description:
Kingfisher Company, inc. SP40S-D Features: Multi-use applications The system can function as an evacuation system, an emergency messaging system, and an employee notification system Fire code applications
More informationSPECIFICATION CHEMGARD INFRARED GAS MONITOR SERIES
SPECIFICATION CHEMGARD INFRARED GAS MONITOR SERIES USER INSTRUCTIONS FOR THE CHEMGARD INFRARED GAS MONITOR SERIES To completely customize the specification to your exact application, modification to the
More informationESP TECHNOLOGIES LIMITED
Alarm Technology ESPAN-01 Series Annunciator System Combination type User Manual (Rev. 1) ESP TECHNOLOGIES LIMITED www.esptechno.com Content Page Introduction 2 General Description 2 Overview - Annunciator
More informationwireless. web-based. worthy of the name RACO.
wireless. web-based. worthy of the name RACO. reliable monitoring unequalled accessibility on-demand reporting wireless, web-based alarm detection and notification system from RACO designed specifically
More informationsintra Sintra is a trademark of Asya Traffic INC.
sintra Sintra is a trademark of Asya Traffic INC. 2 2016 TRAFFIC INC. PRODUCT CATALOGUE 2016 About Sintra Sintra products are manufactured according to the traffic and road safety standards. Sintra products
More informationyour dust explosion protection experts
your dust explosion protection experts HMI Overview Camera Systems Pag. 2 Remote I/O Barriers & Isolators Pag. 3 Purge Pag. 3 Plugs & Receptacles Lighting Pag. 5 Control Stations Pag. 6 Terminal Boxes
More informationOWNER S MANUAL Model A702 / A702-5 Aviation Light with Switch
OWNER S MANUAL Model A702 / A702-5 Aviation Light with Switch Self-contained and maintenance free with no battery or bulb replacement required for five years! Easy installation for most qualified maintenance
More informationUltraLITE Model ELU Centralized Emergency Lighting Inverter 4.2 KW- 5 KW
12/23/16 Rev 9 UltraLITE Model ELU General Specification 4.2 KW to 5 KW UltraLITE Model ELU Centralized Emergency Lighting Inverter 4.2 KW- 5 KW 1.0 General General Specification This specification describes
More informationDual Technology Wall Switch Occupancy Sensor. Manual & Specification
Dual Technology Wall Switch Occupancy Sensor Manual & Specification PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH LOCAL ELECTRICAL CODES Douglas Lighting Controls Page 1 November 19, 2014 1. INTRODUCTION
More informationYodalarm. Sounders. Pg Y03 Y04/YL4 Y05/YL5 Y08/YL8/Y08 SUPER/ YL8 SUPER V4 V6/Y06/YL6 Carillon
Sounders Y03 Y04/YL4 Y05/YL5 Y08/YL8/Y08 SUPER/ YL8 SUPER V4 V6/Y06/YL6 Carillon Pg 185 186 187 188 189 190 191 Y03 1YA030207 1YA030203 1YA030205 YL030/24 A1:2002 YL030110/230 UL464 C22.2 No. M1983 BS
More informationThe system is expanded via the RCC network with each RCC capable of passing information to and from up to 31 detection or output devices.
FireCell Radio Hub Fully addressable Wireless activation Third party approved (EN54) 2-way radio communication Loop powered Diagnostics port Range in excess of 150 metres Overview The model FCX-500-001
More informationFiber Distribution Box
Outdoor Enclosures Fiber Distribution Box Amphenol s Fiber Demarcation Boxes offer superior protection for indoor or outdoor equipment installations. These sealed polymer enclosures provide a long life,
More informationHOBO U30 Remote Monitoring Systems
onset HOBO U30 Remote Monitoring Systems Web-based environmental monitoring All electronics housed within a research-grade, tamperproof enclosure Setup is quick and easy with plug-and-play sensors GSM
More informationVESICA LINEAR SUSPENDED VES L
PROJECT INFORMATION Project Name Catalog # VESICA LINEAR SUSPENDED APPLICATIONS Office Spaces Conference Rooms Municipal Facilities Medical Facilities Type Date Financial Institutions Retail Spaces Hospitality
More informationMounting Kits. LWMB2 6" 6 3 /8" 5 7 /8" 2.6 lbs lbs. LCMB2 6" 5" 5 3 /4 2.3 lbs. 2.5 lbs.
FEDERAL SIGNAL CORPORATION Mounting Kits Models LWMB2 and LCMB2 CUSTOM MOUNTING BRACKETS Heavy-duty construction Easy installation For walls and outside corners Indoor and outdoor use Replaces unsightly
More informationProject: Comments: Prepared By: Control. Code Fixture & Trim D3 Wall Wash, Round. Platform & Control Wide Gamut, Tunable
Project: Comments: Prepared By: Tunable, fixture produces a wide range of 90+ CRI/R9 whites from 1400K-10,000K, as well as pastels and saturated colors Closed-loop color point maintenance to
More informationBID SPECIFICATIONS FOR (NAME OF ENTITY) COMMUNITY OUTDOOR WARNING SIRENS
BID SPECIFICATIONS FOR (NAME OF ENTITY) COMMUNITY OUTDOOR WARNING SIRENS (Name Of Entity) will be accepting bids for the purchase and installation of three (3) electronic, radio controlled, community outdoor
More informationHIGH POWER LED RETROFIT MODULE
LEDBLOCK G3 HIGH POWER LED RETROFIT MODULE The LEDBLOCK is a patented extruded aluminum design that replaces HID, HPS, or MH lamps. The installation bracket of the LEDBLOCK G3 comes partially assembled
More informationNEMA-4X Series. Certified for Harsh Environment Applications
NEMA-4X Series Certified for Harsh Environment Applications NEMA-4X Family The industry standard for emergency lighting in harsh environments is here. Battery units, remote fixtures, exit signage and combination
More informationInstallation Guide for AL600ULM. Multi-Output Access Control Power Supply Charger. Rev
Installation Guide for AL600ULM Multi-Output Access Control Power Supply Charger Rev. 091800 1 AL600ULM - Multi-Output Access Control Power Supply/Charger Overview: The AL600ULM multi-output access control
More informationLED Ultrastar. trobe beacons
LED Ultrastar ed ultrastar 1088872 Class 1, SAE J1318 LEDNodeTM technology for zero maintenance lighting; no bulbs or strobe tubes to replace Rivals the performance of a Class 1 strobe beacon Ten selectable
More informationA. This Section includes the following lighting control devices:
Attachment G LIGHTING CONTROL SPECIFICATIONS (Download Document separately) LIGHTING CONTROL SPECIFICATIONS PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including
More informationMicro-DCI 4 Channel Indicator Totalizers Series 53IT5100
Micro-DCI 4 Channel Indicator Totalizers Series 53IT5100 Four Channels of Process Variable Bargraph Indication Four Channels of Integration and Digital Totalization An Alarm/Annunciator Summary Intuitive
More informationAS950 PORTABLE SAMPLERS
AS950 PORTABLE SAMPLERS Applications Wastewater Collections Industrial Pretreatment Environmental Monitoring Stormwater Sampling has never been this easy. The AS950 Portable Sampler makes programming,
More informationGet connected with Xantrex Grid-Tie Inverters
Get connected with Xantrex Grid-Tie Inverters Available in 2800 or 5000 watt power output. Redefining the grid-tie inverter is a tall order, but that s exactly what Clipsal have done with their Xantrex
More informationSP-1000X. Panic Device Power Controller Installation Guide. Rev
TM SP-1000X Panic Device Power Controller Installation Guide Rev. 120213 Overview: SP-1000X will operate up to two (2) 24VDC panic hardware devices simultaneously. It is designed to handle the high current
More informationSelf-contained and intrinsically safe wireless stand-alone multi-point gas detector.
Introduction United Safety applies the detection system as a multi-point monitoring for toxic gases, combustibles and oxygen hazards. Self-powered and solar-capable, the features unequaled versatility,
More information380 SERIES REMOTE SIREN ETSA380R
! WARNING Sirens produce loud sounds that may damage hearing: - Roll up windows. - Wear hearing protection. - Use only for emergency response. - Avoid exposure to siren sound outside of vehicle. Please
More informationCalifornia. Approved LED Products.
California Approved LED Products www.fedsig.com What is California Title 13? California Title 13 is a regulation set forth by the California Code of Regulations for vehicle warning. The regulation categorizes
More informationInstallation Guide for AL400ULM. Multi-Output Access Control Power Supply Charger
Installation Guide for AL400ULM Multi-Output Access Control Power Supply Charger R AL400ULM - Multi-Output Access Control Power Supply/Charger Rev. 072500 Overview: The AL400ULM multi-output access control
More informationPRODUCT OFFERING QUALITY VALUE VERSATILITY
PRODUCT OFFERING QUALITY VALUE VERSATILITY LED FAMILY The Compass LED product series includes economical energy saving fixtures suitable for use in any commercial or light industrial application. Value
More informationSECTION EXTERIOR LIGHTING
SECTION 26 56 00 PART 1 - GENERAL 1.1 DESCRIPTION This section specifies the furnishing, installation, and connection of exterior luminaries, controls, poles and supports. 1.2 RELATED WORK A. Section 26
More informationRPSMLR2 RPSMLR2BB. Panic Device Power Controller Installation Guide LISTED. Rev
RPSMLR2 RPSMLR2BB Panic Device Power Controller Installation Guide LISTED Rev. 102715 Overview: RPSMLR2BB, RPSMLR2 will operate up to two (2) 24VDC panic hardware devices simultaneously. It is designed
More informationFeatures. Omni2 Door Warning Sign Alarm Annunciator DATASHEET. Model C1190B Door Warning Sign
Features DATASHEET Connects to multiple sensing instruments One/Two Channel Device Bright solid state LED Alarm Display Audible Alert (internal and external) High reliability, fully dual redundant alarm
More informationSpecial Provision No. 682S27 June This Special Provision refers to the following standards, specifications or publications:
CONTROLLER CABINETS, POLE MOUNTED - Item No. Special Provision No. 682S27 June 2017 1. SCOPE This Special Provision covers the requirements for the installation of pole mounted controller cabinets and
More informationPictogram Exit Signs Catalogue
Pictogram Exit Signs Catalogue Introducing new Pictogram Exit Signs To harmonize with existing international standards (ISO 7010 and ISO 3864-1), the National Building Code of Canada (NBC) released at
More informationCNA-Series - Large Industrial Heaters Tankless Water Heating Solutions
36-144 kw (122,800-491,300 BTUs) Certified Lead-Free Design New & Improved Pressure Drop Advantage Variable Temp Heat Exchanger NEMA 4 enclosure standard Independent Safeties ETL and cetl certified to
More informationInstallation Guide for AL300ULM. Multi-Output Access Control Power Supply Charger
Installation Guide for AL300ULM Multi-Output Access Control Power Supply Charger R AL300ULM - Multi-Output Access Control Power Supply/Charger Overview: The AL300ULM multi-output access control power supply/charger
More informationMulti-Output Access Control Power Supply Charger VDC or 24VDC VDC or 3 24VDC.
M Series Multi-Output Access Control Power Supply Charger Installation Guide Models Include: AL300ULM AL400ULM - 2.5 amp @ 12VDC or 24VDC. - 4 amp @ 12VDC or 3 amp @ 24VDC. AL600ULM AL1012ULM - 6 amp @
More informationTrueAlarm Fire Alarm Controls
FIRE ALARM ALARMS S DISABLEMENT DISABLED ZONES SITE SPECIFIC PROGRAMMABLE KEYS/LEDS S /DISABLED SILENCED DISABLE/ENABLE S SILENCE/RESOUND SYSTEM PULL DOOR TO OPEN RESET PANEL SILENCE POWER INDICATION OF
More informationSOLID STATE ILLUMINATED RAIL
SOLID STATE ILLUMINATED RAIL Grand Park, Los Angeles California Lighting Design: The Lighting Design Alliance Installation: Rosendin Electric Manufacturer Representative: Performance Lighting Systems
More informationVigilant LED Based Obstruction Lights
Vigilant LED Based Obstruction Lights Index 02 Vigilant LED Based L-856/L-864 High Intensity (White/Red) Strobe 03 Vigilant LED Based L-865/L-864 Medium Intensity (White/Red) Strobe About Dialight As the
More informationRack Mount Series Installation Guide
Rack Mount Series Installation Guide Models Include: Maximal1RHV Maximal1RV - 12VDC @ 4 amp or 24VDC @ 3 amp. - 12VDC @ 4 amp or 24VDC @ 3 amp. - Eight (8) Fuse Protected Outputs. - Sixteen (16) Fuse Protected
More informationThe Commercial LED Lighting Specialist
2 01 5 The Commercial LED Lighting Specialist LED FLOOD LIGHTS PRODUCT CATEGORY DATA SHEET Our Service, Our People, Your Choice The Commercial LED Lighting Specialist The LED Flood Light series is a versatile
More informationFire station flashers come in two basic formats: Type 1 and Type 2 systems.
Wireless Traffic Control Solutions 1930 East Third Street, Suite 21 Tempe, Arizona 85281-2929 Phone: 480.449.0222 Fax: 480.449.9367 Cellular: 480.694.8896 Email: info@solar-traffic-controls.com www.solar-traffic-controls.com
More informationPRODUCT OVERVIEW. Light fittings, boxes & custom built control panels for explosive atmospheres
PRODUCT OVERVIEW Light fittings, boxes & custom built control panels for explosive atmospheres LIGHT FITTINGS, BOXES & CUSTOM BUILT CONTROL PANELS FOR EXPLOSIVE ATMOSPHERES Light fittings for all zones
More informationDimensions (111mm) 3 (76mm) (111mm) (48mm)
Catalog # : Project : Prepared By : Date : S2 The sleek architectural S is designed with tooless entry features saving time and money on installation. Optimizing Industry LED technology, the S series delivers
More informationLEAKSTOPPER RANGE Multizone water leak detection systems
LEAKSTOPPER RANGE Multizone water leak detection systems WHAT DOES THE PRODUCT DO? The LeakStopper detects water leaks and instantly triggers an alarm to warn you. It is capable of monitoring between 2
More informationLPI Lightning Warning System - LWS MKIII
LPI Lightning Warning System - LWS MKIII Features Early detection of lightning activity within approximately 25km Alarm signalled when lightning approaches within approximately 8-10km All Clear indication
More informationDimensions (111mm) (111mm) 3 (76mm)
Catalog # : Project : Prepared By : Date : S8 The sleek architectural S is designed with tooless entry features saving time and money on installation. Optimizing industry leading LED technology, the series
More informationTHE HIGH STRIP FIXTURE SERIES PERFORMANCE KEY FEATURES INCLUDE: LED Fixture Series for General, Direct and Indirect Illumination
THE HIGH PERFORMANCE LED Fixture Series for General, Direct and Indirect Illumination KEY FEATURES INCLUDE: Advanced Thermal Management Industry Leading Deep Fin Heat Sinks with Aircraft Grade Aluminum
More information5600 series. Low Energy Power Operator
5600 series Introduction The 5600 Series, a member of the POWERMATIC Family of Operators, offers functionality and control at an affordable price. Ideal for retrofit applications, the 5600 Series converts
More informationEMS510 PS-1 COMPLIANT OPACITY/DUST MONITOR
EMS510 PS-1 COMPLIANT OPACITY/DUST MONITOR The EMS510 provides continuous, low maintenance, precision measurement of Opacity and Dust (mg/m3). It is designed for monitoring visible smoke in the exhaust
More informationGeneral Alarm System. User Manual. Protec Fire Detection plc, Protec House, Churchill Way, Nelson, Lancashire, BB9 6RT, ENGLAND
General Alarm System User Manual Protec Fire Detection plc, Protec House, Churchill Way, Nelson, Lancashire, BB9 6RT, ENGLAND +44 (0) 1282 717171 www.protec.co.uk sales@protec.co.uk Document Revision Details
More informationPioneering Petroleum Canopy Lighting Since 1976
Pioneering Petroleum Canopy Lighting Since 1976 1976 LSI enters canopy lighting market 1995 2007 2008 Scottsdale Crossover 50 Crossover 100 2009 CRO3 2011/2012 CRS/CRS Gold 2013 CRU 2014 CRUS When LSI
More informationC1N Series - Light Industrial Heaters Tankless Water Heating Solutions
18-25 kw (61,4000-85,300 BTUs) Low flow activation options at 0.25 and 0.50 GPM (1.0 and 1.9 LPM) Certified Lead-Free Design Variable Temp Heat Exchanger Pressure Drop Advantage NEMA 4 enclosure standard
More informationObelux MI-2KR-A Page 1/5 ICAO Medium Intensity Type B and C, FAA L-864 and L-885, cd flashing / fixed red obstacle light
Obelux MI-2KR-A 15.05.2014 Page 1/5 Key features Based on LED technology 2000 cd fixed / flashing red light Standalone unit with integrated power supply, fault monitoring, and day/night switch using photocell
More information25W Explosion Proof Surface Mount LED Light - C1D1-2 - C2D1-2 - Aluminum Frame V AC
25W Explosion Proof Surface Mount LED Light - C1D1-2 - C2D1-2 - Aluminum Frame - 120-277V AC Part #: EXHL-TRN-LE1-1227 Page: 1 Made in Texas The EXHL-TRN-LE1-1227 from Larson Electronics is an Explosion
More informationDräger REGARD -1 Control System
Dräger REGARD -1 Control System The Dräger REGARD -1 is a standalone single-channel control system for the detection of toxic and Ex hazards and oxygen levels. The control system is fully configurable
More informationPOINT FLASHING BEACON PFB EX LED HAZARDOUS AREA CLASS I, DIVISION 2
Compliances: Class I, Division 2, Groups A B C D, T6 Class I, Zone 2, Groups IIA IIB+H2 IIC, T6 ETL Verified FAA L-864 to FAA Advisory Circular 150/5345-43G Compliance to ICAO Annex 14 Medium Intensity
More informationOverview. Wireless Overview QLD NSW VIC Fundamentals. Operation. Features.
Wireless Overview www.incitefire.com.au Overview Fundamentals FIREwave is a wireless based family of products which is fully integrated into Hochiki s renowned ESP intelligent hardwired system. This seamless
More informationModels NFPA 1221-A, NFPA 1221-B Public Safety DAS Annunciator Panel. Revision E 61117
Models NFPA 1221-A, NFPA 1221-B Public Safety DAS Annunciator Panel Revision E 61117 CAUTION: (Read This First) This panel has been designed to make it nearly bullet proof to mistakes made when wiring
More information1. PURPOSE. This advisory circular (AC) contains the Federal Aviation Administration (FAA) specification for obstruction lighting equipment.
U.S. Department of Transportation Federal Aviation Administration Advisory Circular Subject: SPECIFICATION FOR OBSTRUCTION LIGHTING EQUIPMENT Date: 10/19/95 Initiated by: AAS-200 AC No:150/5345-43E Change:
More informationIntegrated SensorDIM LED Driver Daylight Monitoring Version
TM Integrated SensorDIM ED Driver Daylight Monitoring Version Model: HEC730 with HRC-0.1 ED + ED - ED current selection 0 9 Daylight threshold Antenna module connector Buzzer ] PUSH Extended antenna 99
More informationC. The system shall be capable of turning luminaires on/off (where supported by the luminaire) as well as full range dimming.
SECTION 260943 SPECIFICATIONS - Wireless Network Lighting Controls. PART 1 - GENERAL 1.1 RELATED DOCUMENTS 1.2 SUMMARY AND KEY SYSTEM DIFFERENTIATORS A. The lighting control system specified herein shall
More informationPublic Safety DAS Annunciator Panel
Public Safety DAS Annunciator Panel 120 VAC Models: 1221-A, 1221-B, 1221-C Revision D 91117 48 VDC Models: 1221-A-48, 1221-B-48, 1221-C-48 24 VDC Models: 1221A-24, 1221-B-24, 1221-C-24 CAUTION: (Read This
More informationINSTRUCTION & SERVICE MANUAL
INSTRUCTION & SERVICE MANUAL D1xC COMBINED RADIAL HORNS & STROBES For Use In Hazardous Locations - Gas 3) Ratings and Markings The D1xC1 and D1xC2 combined alarm horns and strobes comply with the following
More informationACSI Series 1550K-MD and 1550-MD Motor Drive Electric Latch Retraction
ACSI Series 1550K-MD and 1550-MD Motor Drive Electric Latch Retraction Riser and Point-to-Point Drawings for Standard Access Control Applications Using Maintained Latch Retraction Control or Momentary
More informationBeam-A-Temp Portable Infrared Thermometer Measures up to 1832 F/1000 C with 50:1 distance to target ratio. Specifications
Non-contact Thermometers Portable Beam-A-Temp Portable Infrared Thermometer Measures up to 1832 F/1000 C with 50:1 distance to target ratio Temperature range from -58 to 1832 F (-50 to 1000 C)! Built-in
More informationWireless sensor transmitters should be installed within 200 to 500 feet of the RC2100 Controller.
Installation and Operation Instructions RC2100 Series 2000 Wireless Steam or Hot Water Receiver - Controller TOP VIEW 4.72" 3.54" Status LEDs Display 9.43" 8.92" Operation Keys Status LEDs Alarm LEDs Power
More informationINERIS 01ATEX0060 (standard) TR CU (marking upon request, ordering code to be required)
FLUORESCENT LIGHTING RMS-560.. Series - Fluorescent lighting fixtures TECHNICAL FEATURES RMS.. series lighting fixtures are ideally suited for ON and OFF-SHORE applications and all kinds of industries
More informationMulti-Output Access Control Power Supply Chargers VDC or 24VDC VDC or 4 24VDC.
M Series Multi-Output Access Control Power Supply Chargers Installation Guide Models Include: AL300ULM AL400ULM - 2.5 amp @ 12VDC or 24VDC. - 3 amp @ 12VDC or 4 amp @ 24VDC. AL600ULM AL1012ULM - 6 amp
More informationIndustrial Horn & LED Strobe Warning System - 12V DC - Weatherproof - NEMA 4X - Class 1 Beacon
Industrial Horn & LED Strobe Warning System - 12V DC - Weatherproof - NEMA 4X - Class 1 Beacon Part #: WAL-TL-1XCL1B-C-PA-12V Page: 1 Made in the USA The WAL-TL-1XCL1B-C-PA-12V from Larson Electronics
More informationTri-Stack Smart System
Tri-Stack Smart System TM Notes & Warnings - The protection provided by this equipment may be impaired if it is not used in the manner specified herein. - Ensure all wiring meets applicable national and
More information4040 FM 535 F :
OVERVIEW OPTICAL TURNSTILE SYSTEM HALF HEIGHT BARRIER TURNSTILES MODEL OTS-HHB-6 The OTS-HHB monitors through-beam infrared sensors, access control contacts, and barrier posion sensors to control the moon
More informationProduct Specifications MaxLumen MRI LED Diffused Lighting
NOVA Energy & Automation Product Specifications MaxLumen MRI LED Diffused Lighting Model MXLumen22-X 03 January 2012 Product Description 1. Standard Applications The Nova Max Lumen LED 2x2 light fixture
More informationFiber Optic Cable Fence Disturbance Sensor
Architectural & Engineering Specification for Fiber Optic Cable Fence Disturbance Sensor Purpose of document This document is intended to provide performance specifications and operational requirements
More informationIndustrial Freezer Sales A division of IDS 5311 Derry Avenue Building D Agoura Hills CA Phone (818) Fax (818)
UCUF191S-86, UCUF241S-86 and UCUF281S-86 UPRIGHT ULTRACOLD FREEZERS Control and Alarm Features Manual defrost, adjustable control range from -50 C to -86 C. UL/CUL Listed. Factory preset at -80 C. Advanced
More informationANEMOMETER 4403-RF-BAT
ANEMO 4403 Radio impulsive output Anemometer - Wireless Robust wind speed sensor,extremely resistant and flexible, Suitable for many different application. Stainless steel bearings and high quality technical
More informationdesign guide for wireless l i g h t i n g c o n t r o l
design guide for wireless l i g h t i n g c o n t r o l ON OFF system operation radiotouch Fluorescent Fixtures ( With Lutron dimming ballasts) Power RadioTouch Controller RadioTouch Controller Power Power
More informationvibration switch
user manual 440-450 vibration switch INSTALLATION - OPERATION - MAINTENANCE Z0592822_A ISSUED 06/2017 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT. contents Section 1 -
More informationObstruction Lighting
Obstruction Lighting Light A Light B Light C Light D Light E Avlite Systems has an extensive range of LED obstruction lighting to clearly mark structures such as telecommunication towers, wind turbines
More informationIVR15-RPS O.D. Solid State Illuminated Rail Remote Power Supply
IVR15RPS O.D. Solid State Illuminated Rail Remote Power Supply 1.50 recognized 0.3 90 APERTURE Ends of Illuminated rail field cutable to a minimum of 2 1/8 in length. Illuminated rail is available with
More informationApplications. Standard Materials
Mercmaster III Low Profile Compact Fluorescent Luminaires Compact Fluorescent listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Applications Enclosed and gasketed fixtures
More informationSLATE. Base Module INSTALLATION INSTRUCTIONS R8001A1001
SLATE Base Module R8001A1001 INSTALLATION INSTRUCTIONS Scan for more information Application SLATE brings configurable safety and programmable logic together into one single platform. The platform can
More informationVIENTO MEDIUM AREA & SITE LED LUMINAIRE OPTICS
PROJECT INFORMATION Project Name Date VIENTO MEDIUM Catalog # APPLICATIONS Auto Dealership Sales Lots Parking Lots Educational/Business Campuses Type Parks & Recreation Areas Security Areas Mall & Retail
More informationECC-50/100C. Emergency Command Center
ECC-50/100C Emergency Command Center Canadian DF-60815:B Emergency Communications General Fire-lite s ECC-50/100C is a multipurpose emergency voice evacuation panel for fire applications, mass notification
More informationEXTINGUISHING AGENT RELEASE MODULE
EXTINGUISHING AGENT RELEASE MODULE Operation, Installation & Programming Manual Revision 3.00 Distributors For: 18-20 Brookhollow Ave telephone 02 8850 2888 www.firesense.com.au Baulkham Hills NSW 2153
More informationApplications and Features
120 VAC 18x16x8 Inch Weatherproof Enclosure with Mounting Plate, Cooling Fans, Heaters & Solid State Dual Point Temperature Controller Model: NB181608-1HFS Applications and Features Features: Molded Fiberglass
More informationThe New Standard In Safety
Sold by: http://www.twacomm.com Toll Free: (877) 389-0000 The New Standard In Safety GAI-TRONICS A Hubbell Company GAI-Tronics, a Hubbell Company, has been a leading manufacturer in the emergency communications
More informationConnectivity Control Confidence
Connectivity Control Confidence Control Systems CS Designed and manufactured in the USA Letter from the CEO James Hawkins, CEO Kenall Manufacturing The lighting controls market has been dramatically transformed
More informationSECTION LOW VOLTAGE LIGHTING CONTROLS
SECTION 26 09 26 LOW VOLTAGE LIGHTING CONTROLS PART 1 - GENERAL 1.01 RELATED DOCUMENTS: A. The Conditions of the Contract and applicable requirements of Division 1, "General Requirements", and Section
More informationThermo Scientific HERAfreeze Top and Basic Freezers Solutions for safe sample storage
Thermo Scientific HERAfreeze Top and Basic Freezers Solutions for safe sample storage Part of Thermo Fisher Scientific Safeguarding your precious samples Researchers worldwide protect more than two billion
More informationAdvanced DIGITAL Wired PIR Motion Detector
PRELIMINARY Advanced DIGITAL Wired PIR Motion Detector The PIRfect PYR-2021 provides DIGITAL Passive Infra Red (PIR) motion detection across a volumetric area, with versatile advanced SPHERICAL SEALED
More information5 yr. Vitalite Rotating Warning Light. Models 121 and 121A LIGHT DUTY VEHICULAR LIGHT
FEDERAL SIGNAL CORPORATION Vitalite Rotating Warning Light Models 121 and 121A LIGHT DUTY VEHICULAR LIGHT Available in 12VDC and 24VDC Five dome colors 121 - Magnetic mount with cigarette lighter cord
More information