Supplement to ISOFocus

Transcription

1 Update Supplement to Focus January 2014

2 International Standards in process An International Standard is the result of an agreement between the member bodies of. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. CD registered Period from 01 December to 31 December 2013 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. TC 8 /CD TC 10 /DTR TC 17 /CD TC 21 /CD /CD TC 39 /CD /CD TC 41 /CD 9563 TC 43 /CD TC 44 Ships and marine technology Ships and marine technology Pressure/ vacuum valves for cargo tanks Technical product documentation Symbol libraries for construction and facilities management Steel Steel for the reinforcement of concrete Part 2: Ribbed bars Equipment for fire protection and fire fighting Smoke and heat control systems Part 7: Smoke ducts sections Smoke and heat control systems Part 8: Smoke control dampers Machine tools Machine tools Test conditions for testing the accuracy of boring and milling machines with horizontal spindle Part 2: Machines with movable column and fixed table Test conditions for numerically controlled turning machines and turning centres Part 2: Geometric tests for machines with a vertical workholding spindle Pulleys and belts (including veebelts) elt drives Electrical conductivity of antistatic endless synchronous belts Characteristics and test method Acoustics Acoustics Field measurement of sound insulation in buildings and of building elements Part 3: Façade sound insulation Welding and allied processes /CD 9013 /CD TR TC 45 /CD /CD /CD 4633 /CD TC 54 /DTS 210 /DTS 211 TC 59 /CD /CD /CD /DTS TC 60 /DTR TC 84 /CD 8537 TC 85 /CD TC 92 /DTR /DTS TC 94 /DTS TC 134 /CD Thermal cutting Classification of thermal cuts Geometrical product specification and quality tolerances Guidelines for measurement of welding energies Rubber and rubber products Rubber compounding ingredients Silica, precipitated, hydrated Part 2: Evaluation procedures in styrene-butadiene rubber Rubber- or plastics-coated fabrics Determination of roll characteristics Part 3: Method for determination of thickness Rubber seals Joint rings for water supply, drainage and sewerage pipelines Specification for materials Rubber- or plastics-coated fabrics Determination of tear resistance Part 1: Constant rate of tear methods Essential oils Essential oils General rules for packaging, conditioning and storage Essential oils General rules for labelling and marking of containers uildings and civil engineering works Houses Description of performance Part 1: Structural safety Houses Description of performance Part 2: Structural serviceability Houses Description of performance Part 3: Structural durability Draft on sustainability in buildings and civil engineering works - Sustainability indicators Part 2: Framework for the development of indicators for civil engineering works Gears Worm gears Worm profiles and gear mesh geometry Devices for administration of medicinal products and intravascular catheters Sterile single-use syringes, with or without needle, for insulin Nuclear energy, nuclear technologies, and radiological protection Guide for gamma-ray spectrometry measurement of radioactive waste packages Fire safety Fire safety Engineering Performance of structure in fire Part 2: Example of an airport terminal Fire Safety Engineering Selection of design occupant behavioural scenarios Personal safety -- Protective clothing and equipment PPE for firefighters Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures Part 2: Compatibility Fertilizers and soil conditioners Fertilizer grade urea General requirements Update, Supplement to Focus -- January

3 /CD /CD /CD TC 150 /CD /CD TC 172 /CD TC 173 Determination of iuret Content for Fertilizers High Performance Liquid Chromatography Method Controlled release fertilizer General requirement Water soluble fertilizer General requirements Implants for surgery Implants for surgery Partial and total hip joint prostheses Part 12: Deformation test for acetabular cups Implants for surgery Wear of total knee prostheses Part 4: Wear of the patella-femoral joint Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test Optics and photonics Optics and optical instruments Laboratory procedures for testing surveying and construction instruments Part 1: Performance of handheld laser distance meters Assistive products for persons with disability /CD 9999 Assistive products for persons with disability Classification and terminology TC 178 Lifts, escalators and moving walks /DTS TC 184 /DTS /CD IEC/CD TC 189 /DTR TC 202 /DTR TC 204 /DTS TC 206 /CD TC 207 /CD TC 209 /CD TC 210 Lifts (elevators) Requirements for lifts used to assist in building evacuation Automation systems and integration Robots and robotic devices Safety requirements for industrial robots Collaborative operation Robots and robotic devices Performance criteria and related test methods for service robot Part 1: Wheeled mobile servant robot Enterprise-control System Integration Part 4: Objects and attributes for manufacturing operations management integration Ceramic tile Ceramic tiles Guidelines for installation Part 2: Installation of thin ceramic wall and floor tiles and panels Microbeam analysis Guide to practical chemical state analysis in EPMA Intelligent transport systems Electronic Fee Collection (EFC) Interface definition between DSRC-OE and external in-vehicle devices Fine ceramics Fine ceramics (advanced ceramics, advanced technical ceramics) Test method for determining elastic modulus and bending strength of ceramic tube and rings Environmental management Environmental management Combatting land degradation and desertification Part 1: Guidelines and general framework Cleanrooms and associated controlled environments Cleanrooms and associated controlled environments Part 14: Assessment of suitability for use of equipment by airborne particle concentration Quality management and corresponding general aspects for medical devices IEC/DTR TC 215 IEC/DTR TC 228 /CD TMG /IEC CD Guide 71 JTC 1 /IEC PDTR /IEC PDTS /IEC PDTS /IEC PDTS /IEC PDTS /IEC CD /IEC CD /IEC CD /IEC CD /IEC CD /IEC :2013/ PDAM 1 /IEC CD /IEC CD /IEC CD Medical device software Part 3: Process reference model of medical device software life cycle processes (IEC 62304) Health informatics Application of risk management for IT-networks incorporating medical devices Part 2-5: Application guidance Guidance for distributed alarm systems Tourism and related services Industrial tourism Technical Management oard - groups Guidelines for addressing accessibility in standards Information technology Information technology Generic cabling for customer premises Part 8: Guidance for balanced cabling in support of at least 40 Gbit/s data transmission Information technology Programming languages, their environments and system software interfaces Part 2: Extension for the programming language C to support decimal floating-point arithmetic Information technology Programming languages, their environments and system software interfaces Part 3: Interchange and extended types Information technology Programming languages, their environments and system software interfaces Part 4: Supplementary functions Information technology Programming languages, their environments and system software interfaces Part 5: Supplementary attributes Information technology Security techniques Hash-functions Part 1: General esting methods for the mitigation of noninvasive attack classes against cryptographic modules Information technology Security techniques Requirements for bodies providing audit and certification of information security management systems Information technology Security techniques Code of practice for information security controls for cloud computing services based on /IEC Information technology Security techniques Network security Part 1: Overview and concepts Information technology Security techniques Lightweight cryptography Part 4: Mechanisms using asymmetric techniques Amendment 1 Information technology Radio frequency identification for item management Part 3: Parameters for air interface communications at 13,56 MHz Information technology Automatic identification and data capture techniques OCR Quality Testing Information technology Document description and processing languages Office Open XML File Formats Part 3: Markup Compatibility and Extensibility 2 Update, Supplement to Focus -- January 2014

4 /DIS * Space Systems Relative motion analysis elements after LV/ SC Separation DIS circulated TC 22 /DIS Road vehicles * Road vehicles Fuse-links Part 1: Definitions and general test requirements Period from 01 December to 31 December 2013 These documents have obtained substantial support within the appropriate technical committee. They have been submitted to the member bodies for voting by the date shown. * Available in English only PC 252 Natural gas fuelling stations for vehicles /DIS * Natural gas fuelling stations CNG stations for fuelling vehicles /DIS * Natural gas fuelling stations LNG stations for fuelling vehicles REMCO Committee on reference materials /DGuide 30 * Reference materials Selected terms and definitions TC 4 /DIS TC 8 (Revision of Guide 30:1992) Rolling bearings * Rolling bearings Single-row angular contact ball bearings Chamfer dimensions for outer ring non-thrust side (Revision of 12044:1995) Ships and marine technology Vote terminates /DIS * Ships and marine technology Single point mooring arrangements for tankers /DIS /IEC DIS TC 23 /DIS TC 24 /DIS TC 29 (Revision of :2008) * Road vehicles Unified diagnostic services (UDS) Part 7: Unified diagnostic services on Local Interconnect Network implementation (UDSonLIN) * In-Cable Control and Protection Device for mode 2 charging of electric road vehicles (IC-CPD) Tractors and machinery for agriculture and forestry * Agricultural machinery and tractors Safety of higher voltage electrical and electronic components and systems Part 1: General requirements Particle characterization including sieving * Evaluation of pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption Part 1: Mercury porosimetry (Revision of :2005, :2005/Cor 1:2007) Small tools /DIS 9138 * Abrasive grains Sampling and splitting (Revision of 9138:1993) /DIS 7738 * Assembly tools for screws and nuts Combination wrenches Lengths of wrenches and maximum thickness of heads (Revision of 7738:2001) TC 31 Tyres, rims and valves /DIS * Rims for agricultural, forestry and construction machines TC 17 /DIS Steel * Steel and irons Determination of total silicon content Reduced molybdosilicate spectrophotometric method Part 2: Silicon contents between 0,01 and 0,05 % (Revision of :1988) /DIS 4938 * Steel and irons Determination of nickel content Gravimetric or titrimetric method (Revision of 4938:1988) /DIS 4942 * Steel and irons Determination of vanadium content N-PHA spectrophotometric method TC 20 (Revision of 4942:1988) Aircraft and space vehicles (Revision of :2006) /DIS * Tyre classification /DIS * Tyres and rims for logging and forestry service TC 34 Food products /DIS * Animal and vegetable fats and oils Determination of conventional mass per volume (litre weight in air) Oscillating U-tube method TC 37 Terminology and other language and content resources Update, Supplement to Focus -- January

5 /DIS TC 41 * Language resource management Component Metadata Infrastructure Part 1: The Component Metadata Model (CMDI-1) Pulleys and belts (including veebelts) /DIS * Synchronous belt drives Metric pitch - Curvilinear profile systems G, H, R and S - elts and pulleys Complementary element (Revision of 13050:1999) TC 42 Photography /DIS * Imaging materials Optical discs Care and handling for extended storage (Revision of 18938:2008) TC 43 Acoustics /DIS 9296 * Acoustics Declared noise emission values of information technology and telecommunications (Revision of 9296:1988) TC 61 Plastics /DIS * Plastics Verification of pendulum impact-testing machines Charpy, Izod and tensile impact-testing (Revision of 13802:1999, 13802:1999/Cor 1:2000) /DIS * Plastics Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test (Revision of 20200:2004) /DIS * Test methods for Natural Fiberreinforced Plastic Composite (NFC) Deck oards TC 69 /DIS TC 85 /DIS /DIS TC 92 /DIS TC 94 Applications of statistical methods * Statistical methods for use in proficiency testing by interlaboratory comparisons (Revision of 13528:2005) Nuclear energy, nuclear technologies, and radiological protection * Nuclear energy, nuclear technologie, and radiological protection Vocabulary Part 3: Nuclear fuel cycle * Dosimetry for exposures to cosmic radiation in civilian aircraft Part 3: Measurements at aviation altitudes Fire safety * Fire tests Calibration and use of heat flux meters Part 4: Guidance on the use of heat flux meters in fire tests (Revision of /TS :2007) Personal safety -- Protective clothing and equipment /DIS 9151 * Protective clothing against heat and flame Determination of heat transmission on exposure to flame (Revision of 9151:1995) TC 106 Dentistry /DIS TC :2009/DAmd 1 TC * Dentistry Periodontal curettes, dental scalers and excavators Part 5: Jacquette scalers Compressors and pneumatic tools, machines and equipment * Hand-held portable power tools Test methods for evaluation of vibration emission Part 5: Drills and impact drills Amendment 1 Anaesthetic and respiratory equipment /DIS * Medical devices Sleep apnoea breathing therapy Masks and application accessories /DIS (Revision of :2007) * Medical suction equipment Part 1: Electrically powered suction equipment (Revision of :1999) TC 122 Packaging /DIS * Packaging Accessible design Ease of opening TC 127 Earth-moving machinery /DIS 8643 * Earth-moving machinery Hydraulic excavator and backhoe loader lowering control device Requirements and tests (Revision of 8643:1997) TC 130 Graphic technology /DIS TC 135 /DIS TC :2007/DAmd 1 TC 150 /DIS * Graphic technology Extensible metadata platform (XMP) Part 2: Description of XMP schemas using Relax NG Non-destructive testing * Non-destructive testing Terminology Terms used in magnetic particle testing Plastics pipes, fittings and valves for the transport of fluids * Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 1: General Amendment 1: Melt mass-flow rate (MFR) for PE 80 and PE 100 Implants for surgery * Implants for surgery Hydroxyapatite Part 6: Powders Update, Supplement to Focus -- January 2014

6 /DIS TC 156 * Implants for surgery Wear of total hip-joint prostheses Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test (Revision of :2012) Corrosion of metals and alloys /DIS * Corrosion of Metals and Alloys Guidelines for corrosion test by electrochemical noise measurements TC 158 Analysis of gases /DIS 7504 * Gas analysis Vocabulary TC 172 /DIS (Revision of 7504:2001) Optics and photonics * Microscopes Designation of microscope objectives Part 3: Spectral transmittance /DIS * Ophthalmic instruments Optical coherence tomograph for the posterior segment of the human eye TC 173 Assistive products for persons with disability /DIS TC 195 /DIS TC 199 /DIS TC 204 * Wheelchair containment and occupant retention systems for accessible transport vehicles designed for use by both sitting and standing passengers Part 2: Systems for forward-facing wheelchair-seated passengers Systems for forward facing wheelchair-seated passengers uilding construction machinery and equipment * uilding construction machinery and equipment Mobile crushers Part 1: Terminology and commercial specifications (Revision of :2008) Safety of machinery * Safety of machinery Permanent means of access to machinery Part 3: Stairs, stepladders and guard-rails (Revision of :2001, :2001/Amd 1:2010) Intelligent transport systems /DIS * Electronic fee collection Compliance check communication for autonomous systems (Revision of /TS 12813:2009) /DIS * Electronic fee collection Localisation augmentation communication for autonomous systems (Revision of /TS 13141:2010, /TS 13141:2010/Cor 1:2013) /DIS /DIS /DIS /DIS TC 206 * Intelligent transport systems Reference model architecture(s) for the ITS sector Part 1: ITS service domains, service groups and services (Revision of :2007) * Electronic fee collection Application interface definition for autonomous systems Part 2: Communication and connection to the lower layers (Revision of /TS :2010) * Electronic fee collection Application interface definition for autonomous systems Part 3: Context data (Revision of /TS :2011, /TS :2011/ Cor 1:2013) * Electronic fee collection Application interface definition for autonomous systems Part 4: Roaming (Revision of /TS :2011) Fine ceramics /DIS * Fine ceramics (advanced ceramics, advanced technical ceramics) Methods for chemical analysis of boron nitride powders /DIS * Fine ceramics (advanced ceramics, advanced technical ceramics) Methods for chemical analysis of fine silicon nitride powders /DIS * Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) Determination of antiviral activity of semiconducting photocatalytic materials Test method using bacteriophage Q-beta TC 207 Environmental management /DIS TC 210 IEC/DIS * Environmental management Water footprint Principles, requirements and guidelines Quality management and corresponding general aspects for medical devices Medical devices Part 1: Application of usability engineering to medical devices (Revision of IEC 62366:2007) TC 218 Timber /DIS 738 * Coniferous sawn timber Sizes Permissible deviations and shrinkage (Revision of 738:1981) /DIS 8903 * roadleaved sawn timber Nominal sizes TC 219 (Revision of 8903:1994) Floor coverings Update, Supplement to Focus -- January

7 /DIS 9405 * Textile floor coverings Assessment of changes in appearance /FDIS * Fasteners Hexagon weld nuts with flange (Revision of 9405:2001) /DIS * Textile floor coverings Determination of mass loss, fibre bind and stair nosing appearance change using the Lisson Tretrad machine (Revision of 12951:1999) /DIS * Laminate floor coverings Determination of abrasion resistance (Revision of 24338:2006) TC 257 General technical rules for determination of energy savings in renovation projects, industrial enterprises and regions /DIS * Energy Efficiency and Savings calculation for Countries, Regions and Cities /DIS * Energy savings Definition of a methological framework applicable to calculation and reporting on energy savings JTC 1 Information technology /IEC DIS /IEC :2011/ DAmd 7 /IEC DIS /IEC DIS * Information technology Telecommunications and information exchange between systems PHY/MAC specifications for short-range wireless low-rate applications in the ISM band (Revision of /IEC 29157:2010) * Identification cards Test methods Part 6: Proximity cards Amendment 7: Frame with error correction * Information technology Cloud computing Overview and Vocabulary * Information Technology Cloud Computing Reference Architecture FDIS circulated Period from 01 December to 31 December 2013 These Final draft International Standards have been submitted to the member bodies for formal approval by the date shown * Available in English only TC 2 Fasteners Vote terminates TC 6 /FDIS TC 20 /FDIS TC 22 /FDIS /FDIS /FDIS /FDIS /FDIS /FDIS (Revision of 21670:2003) Paper, board and pulps * Corrugating medium Determination of the edge crush resistance after laboratory fluting Aircraft and space vehicles * Space systems Assessment of survivability of unmanned spacecraft against space debris and meteoroid impacts to ensure successful post-mission disposal Road vehicles * Road vehicles Sheath-type glow-plugs with conical seating and their cylinder head housing Part 4: M8 x 1 glow-plugs (Revision of :2009) * Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 2: Application layer for brakes and running gear (Revision of :2003, :2003/Amd 1:2007) * Road vehicles Interchange of digital information on electrical connections between towing and towed vehicles Part 4: Diagnostic communication (Revision of :2005, :2005/Cor 1:2006) * Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 1: General information and use case definition * Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 2: Technical requirements * Road vehicles Standardized access to automotive repair and maintenance information (RMI) Part 3: Functional user interface requirements /FDIS 5011 * Inlet air cleaning equipment for internal combustion engines and compressors Performance testing (Revision of 5011:2000) TC 23 Tractors and machinery for agriculture and forestry 730:2009/ FDAmd 1 TC 34 /FDIS * Agricultural wheeled tractors Rear-mounted three-point linkage Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 Amendment 1 Food products * Microbiology of food, animal feed and water Preparation, production, storage and performance testing of culture media (Revision of /TS :2003, /TS :2009, /TS :2003/Amd 1:2011) Update, Supplement to Focus -- January 2014

8 TC 38 /FDIS Textiles * Textiles Determination of the phthalate content Tetrahydrofuran method /FDIS TC 92 * Statistics Vocabulary and symbols Part 4: Survey sampling Fire safety /FDIS * Textiles Cotton fibres Evaluation of maturity by the air flow method /FDIS * Fire-resistance tests Part 2: Lift landing door assemblies TC 39 /FDIS /FDIS TC :2010/FDAmd :2010/FDAmd 1 TC 44 /FDIS /FDIS (Revision of 10306:1993) Machine tools * Machine tools Environmental evaluation of machine tools Part 1: Design methodology for energy-efficient machine tools * Test code for machine tools Part 2: Determination of accuracy and repeatability of positioning of numerically controlled axes (Revision of 230-2:2006) Acoustics * Acoustics Laboratory measurement of sound insulation of building elements Part 1: Application rules for specific products Amendment 2: Rainfall sound (Revision of :2006) * Acoustics Laboratory measurement of sound insulation of building elements Part 5: Requirements for test facilities and equipment Amendment 1: Rainfall noise (Revision of :2006) Welding and allied processes * Gas welding equipment Acetylene manifold systems for welding, cutting and allied processes General requirements (Revision of 14114:1999) * Welding Arc stud welding of metallic materials (Revision of 14555:2006) TC 108 /FDIS /FDIS TC 112 /FDIS TC :2007/FDAmd 1 TC 142 /FDIS TC 147 /FDIS Mechanical vibration, shock and condition monitoring * Mechanical vibration and shock Signal processing Part 3: Methods of time-frequency analysis * Condition monitoring and diagnostics of machines Requirements for qualification and assessment of personnel Part 7: Thermography (Revision of :2008) Vacuum technology * Vacuum technology Vocabulary Part 3: Total and partial pressure vacuum gauges (Revision of :1981) Plastics pipes, fittings and valves for the transport of fluids * Plastics piping systems Polyethylene (PE) pipes and fittings for water supply Part 2: Pipes Amendment 1 Cleaning equipment for air and other gases * Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation Part 1: Gas-phase air cleaning media Water quality * Water quality Radium-226 Part 2: Test method using emanometry TC 45 /FDIS TC 61 /FDIS /FDIS Rubber and rubber products * Rubber hoses and hose assemblies Wire- or textilereinforced single-pressure types for hydraulic applications Specification (Revision of 18752:2012) Plastics * Plastics Determination of the fluidity of plastics using capillary and slit-die rheometers (Revision of 11443:2005) * Plastics Determination of image clarity (degree of sharpness of reflected or transmitted image) TC 150 /FDIS TC 156 /FDIS TC 163 Implants for surgery * Retrieval and analysis of surgical implants Part 2: Analysis of retrieved surgical implants (Revision of :2000) Corrosion of metals and alloys * Method of measurement of hydrogen permeation and determination of hydrogen uptake and transport in metals by an electrochemical technique (Revision of 17081:2004) Thermal performance and energy use in the built environment TC 69 Applications of statistical methods /FDIS * Hygrothermal performance of building equipment and industrial installations Calculation of water vapour diffusion Cold pipe insulation systems Update, Supplement to Focus -- January

9 TC 165 /FDIS (Revision of 15758:2004) Timber structures * Timber Finger joints Minimum production requirements and testing methods (Revision of 10983:1999) 16855: :2013 * Ships and marine technology Loose gear of lifting appliances on ships General requirements * Ships and marine technology Loose gear of lifting appliances on ships Hooks F D TC 181 /FDIS Safety of toys * Safety of toys Part 2: Flammability :2013 * Ships and marine technology Loose gear of lifting appliances on ships Shackles E TC 205 /FDIS /FDIS TC 214 /FDIS TC 249 /FDIS JTC 1 /IEC FDIS (Revision of :2007) uilding environment design * uilding automation and control systems (ACS) Part 5: Data communication protocol (Revision of :2012) * uilding automation and control systems (ACS) Part 6: Data communication conformance testing (Revision of :2009) Elevating work platforms * Mobile elevating work platforms Safety principles, inspection, maintenance and operation (Revision of 18893:2004) Traditional chinese medicine * Traditional Chinese medicine Ginseng seeds and seedlings Part 1: Panax ginseng CA Meyer Information technology Information technology Implementation and operation of customer premises cabling Part 3: Testing of optical fibre cabling (Revision of /IEC :2006) :2013 TC :2013 * Ships and marine technology Loose gear of lifting appliances on ships Pulleys G Aircraft and space vehicles * Space systems Measurements of thermo-optical properties of thermal control materials TC 23 Tractors and machinery for agriculture and forestry 5718:2013 * Harvesting equipment lades for agricultural rotary mowers Requirements D TC 25 /TR 16078:2013 TC 29 /TS : : : :2013 Cast irons and pig irons * Cast Irons - Classification and designation of casting imperfections Small tools * Cutting tool data representation and exchange Part 50: Reference dictionary for reference systems and common concepts Tools for pressing Guide pillars Part 1: Types Tools for pressing Guide pillars Part 2: Type A, straight pillars Tools for pressing Guide pillars Part 3: Type, end-locking pillars R X X A Standards published : :2013 Tools for pressing Guide pillars Part 4: Type C, pillars with taper lead and bush Tools for pressing Guide pillars Part 5: Type D, end-locking pillars with flange C C New International Standards published between 01 December and 31 December 2013 * Available in English only ** French version of standard previously published in English only :2013 Tools for pressing Guide bushes Part 1: Forms A TC 8 Ships and marine technology Price group : :2013 Tools for pressing Guide bushes Part 2: Form A, gliding bushes, plain, type 1 Tools for pressing Guide bushes Part 3: Form, ball cage bushes, plain, type 1 8 Update, Supplement to Focus -- January 2014

10 9448-4:2013 Tools for pressing Guide bushes Part 4: Form C, gliding bushes, headed, type :2010/ Amd 1:2013 Gas welding equipment Materials for equipment used in gas welding, cutting and allied processes Amendment 1 XZ : : : : :2013 Tools for pressing Guide bushes Part 5: Form D, ball cage bushes, headed, type 1 Tools for pressing Guide bushes Part 6: Form E, gliding bushes, flanged, type 1 Tools for pressing Guide bushes Part 7: Form F, ball cage bushes, flanged, type 1 Tools for pressing Guide bushes Part 8: Form G, gliding bushes, stepped, type 1 Tools for pressing Guide bushes Part 9: Form, ball cage bushes, plain, type 2 C C TC : :2013 TC :2013 Rubber and rubber products Rubber Identification of polymers Pyrolytic gas-chromatographic method using mass-spectrometric detection Rubber and plastics Polymer dispersions and rubber latices Determination of ph Information and documentation * Information and documentation MarcXchange TC 54 Essential oils 9235:2013 * Aromatic natural raw materials Vocabulary G E J G : :2013 TC :2013 TC 34 /TR 12591:2013 /TS :2013 /TS 22003:2013 TC 43 Tools for pressing Guide bushes Part 10: Form E, gliding bushes, flanged, type 2 Tools for pressing Guide bushes Part 11: Form F, ball cage bushes, flanged, type 2 Tyres, rims and valves Passenger car tyres and rims Part 2: Rims Food products * White tea Definition * Prerequisite programmes on food safety Part 4: Food packaging manufacturing * Food safety management systems Requirements for bodies providing audit and certification of food safety management systems Acoustics D C J M TC :2013 TC :2013 TC :2013 /PAS 12835: :2013 Gas cylinders Gas cylinders Acetylene cylinders Periodic inspection and maintenance Plastics * Plastics Thermogravimetry (TG) of polymers Part 3: Determination of the activation energy using the Ozawa- Friedman plot and analysis of the reaction kinetics Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries * Petroleum and natural gas industries Pipeline transportation systems Welding of pipelines * Qualification of casing connections for thermal wells * Petroleum and natural gas industries General requirements for offshore structures L G X X T 1680:2013 Acoustics Test code for the measurement of airborne noise emitted by rotating electrical machines J 19902:2007/ Amd 1:2013 Petroleum and natural gas industries Fixed steel offshore structures Amendment 1 XZ TC : : :2013 Welding and allied processes Quality requirements for welding Resistance welding of metallic materials Part 1: Comprehensive quality requirements Quality requirements for welding Resistance welding of metallic materials Part 2: Elementary quality requirements Welding and allied processes Symbolic representation on drawings Welded joints F C U TC :2013 TC 85 /ASTM 52628:2013 Devices for administration of medicinal products and intravascular catheters Intravascular catheters Sterile and single-use catheters Part 1: General requirements Nuclear energy, nuclear technologies, and radiological protection * Standard practice for dosimetry in radiation processing M G Update, Supplement to Focus -- January

11 /ASTM 52701: :2013 * Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing Nuclear fuel technology Determination of plutonium content in plutonium dioxide of nuclear grade quality Gravimetric method E C : :2013 * Graphic technology Process control for the production of half-tone colour separations, proofs and production prints Part 3: Coldset offset lithography on newsprint Graphic technology Management of security printing processes L K 16966:2013 TC 92 /TR :2013 /TR :2013 TC 94 /TS :2013 TC :2013 Nuclear energy Nuclear fuel technology Theoretical activation calculation method to evaluate the radioactivity of activated waste generated at nuclear reactors Fire safety * Fire safety engineering Assessment, verification and validation of calculation methods Part 3: Example of a CFD model * Fire safety engineering Assessment, verification and validation of calculation methods Part 5: Example of an Egress model Personal safety -- Protective clothing and equipment Respiratory protective devices Human factors Part 5: Thermal effects Cranes Cranes Control layout and characteristics Part 3: Tower cranes S N S H A TC 131 Fluid power systems 3320:2013 * Fluid power systems and components Cylinder bores and piston rod diameters and area ratios Metric series TC :2011/ Amd 4:2013 IEC :2002/Amd 1:2013 TC :2013 TC 199 /TR :2013 Graphical symbols Graphical symbols Safety colours and safety signs Registered safety signs Amendment 4 * asic principles for graphical symbols for use on equipment Part 3: Guidelines for the application of graphical XZ symbols Amendment 1 Optics and photonics * Optics and photonics Environmental test methods Part 23: Low pressure combined with cold, ambient temperature and dry and damp heat F Safety of machinery * Safety of machinery Relationship with Part 2: How relates to C T TC 98 ases for design of structures 4355:2013 * ases for design of structures Determination of snow loads on roofs TC :2013 Dentistry Dentistry Dental rubber dam technique Part 1: Hole punch R TC :2013 TC :2013 Surface chemical analysis * Surface chemical analysis Secondary ion mass spectrometry Linearity of intensity scale in single ion counting time-of-flight mass analysers Microbeam analysis * Microbeam analysis Analytical electron microscopy Vocabulary M L TC :2013 TC :2013 TC : : :2013 Hydrometry Hydrometry Selection, establishment and operation of a gauging station Anaesthetic and respiratory equipment Anaesthetic and respiratory equipment Nebulizing systems and components Graphic technology * Graphic technology Prepress digital data exchange Part 5: Scenereferred standard colour image data (RIMM/SCID) * Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 1: Parameters and measurement methods * Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 2: Offset lithographic processes J T T J M TC :2012/ Cor 1: :2012/ Cor 1:2013 TC :2013 TC 215 /IEEE :2012 /TS 14441:2013 Intelligent transport systems Intelligent transport systems Automatic vehicle and equipment identification Numbering and data structures Technical Corrigendum 1 Intelligent transport systems Automatic vehicle and equipment identification System parameters Technical Corrigendum 1 Geographic information/ Geomatics * Geographic information Data quality Health informatics Health informatics Personal health device communication Part 10406: Device specialization asic electrocardiograph (ECG) (1- to 3-lead ECG) * Health informatics Security and privacy requirements of EHR systems for use in conformity assessment free free X V XA 10 Update, Supplement to Focus -- January 2014

12 /TR 17791:2013 * Health informatics Guidance on standards for enabling safety in health software T 22857:2013 * Health informatics Guidelines on data protection to facilitate trans-border flows of personal health data U Standards confirmed TC 229 /TR 12885:2008 /TS 13830:2013 /TS :2013 /TS :2013 Nanotechnologies Nanotechnologies Health and safety practices in occupational settings relevant to nanotechnologies * Nanotechnologies Guidance on voluntary labelling for consumer products containing manufactured nano-objects Nanotechnologies Vocabulary Part 6: Nano-object characterization * Nanotechnologies Vocabulary Part 8: Nanomanufacturing processes TMG Technical Management oard - groups IWA 12:2013 * Guidelines on the application of 9001:2008 in policing organizations JTC 1 /IEC TR 18268:2013 /IEC :2013 /IEC :2009/ Amd 4:2013 /IEC :2011/Cor 1:2013 /IEC :2011/Cor 1:2013 /IEC :2011/Cor 1:2013 /IEC :2011/Cor 1:2013 /IEC TR 29198:2013 Information technology * Identification cards Contactless integrated circuit cards Proximity cards Multiple PICCs in a single PCD field * Information technology Security techniques Anonymous digital signatures Part 1: General * Information technology Coding of audio-visual objects Part 3: Audio Amendment 4: New levels for AAC profiles * Information technology Database languages SQL Part 1: Framework (SQL/Framework) Technical Corrigendum 1 * Information technology Database languages SQL Part 2: Foundation (SQL/Foundation) Technical Corrigendum 1 * Information technology Database languages SQL Part 4: Persistent Stored Modules (SQL/PSM) Technical Corrigendum 1 * Information technology Database languages SQL Part 14: XML- Related Specifications (SQL/XML) Technical Corrigendum 1 * Information technology iometrics Characterization and measurement of difficulty for fingerprint databases for technology evaluation W C M N T F K M free free free free N The following International Standards are confimred for a five year period: TC :2005 TC : : :2004 TC : : :2007 TC : :1991 TC :2003 TC : :1995 /TS 20836:2005 TC :1998 TC : :1995 TC : :2004 TC :2012 TC :2004 TC : : : : : :1997 TC :2002 TC 106 Paper, board and pulps Ships and marine technology Steel Equipment for fire protection and fire fighting Tractors and machinery for agriculture and forestry Food products Paints and varnishes Machine tools Gas cylinders uildings and civil engineering works Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries Textile machinery and accessories Fire safety Dentistry Update, Supplement to Focus -- January

13 7551:1996 TC :2003 TC :2002 /TS 18226:2006 TC :2002 TC : : : : :2000 TC :1992 TC : :2004 TC : : :1999 JTC 1 /IEC 12207:2008 /IEC :2008 Fluid power systems Plastics pipes, fittings and valves for the transport of fluids Water quality Thermal performance and energy use in the built environment Solar energy Cleanrooms and associated controlled environments Geosynthetics Information technology Standards withdrawn Period from 01 December to 31 December 2013 TC 8 Ships and marine technology /TR 6065:1991 /PAS 13613:2010 /TR 5987:1984 /TR 13298:1998 TC 17 Steel /TR :1978 /TR 10719:1994 /TR :1998 /TR :1998 /TR 15461:1997 /TR 12662:1997 /TR 7705:1991 /TR 10108:1989 TC 20 Aircraft and space vehicles /TR 224:1998 /TR 14618:1996 TC 22 Road vehicles /TR 7882:1986 /TR 12155:1994 /TR 12343:1997 /TR 4114:1979 /TR 8725:1988 /TR 8726:1988 /TR 14645:1998 /TR 1417:1974 /TR 9511:1991 TC 23 Tractors and machinery for agriculture and forestry /TR 12369:1994 TC 26 Copper and copper alloys /TR 4745:1978 TC 30 Measurement of fluid flow in closed conduits /TR :1997 /TR 3313:1998 /TR 12764:1997 TC 38 Textiles /TR 7248:1985 /TR :1987 /TR 8091:1983 TC 45 Rubber and rubber products /TR 8354:1987 TC 46 Information and documentation /TR 8393:1985 /TR 11941:1996 TC 52 Light gauge metal containers /TR 8610:1984 /TR 10194:1989 /TR 11776:1992 TC 54 Essential oils /TR 210:1999 /TR 211:1999 TC 59 uildings and civil engineering works /TR 8389:1984 /TR 8390: Update, Supplement to Focus -- January 2014

14 TC 60 /TR 13593:1999 /TR :2000 /TR :2000 TC 61 Gears Plastics /TR 4137:1978 /TR :1999 TC 77 Products in fibre reinforced cement /TR 1896:1991 TC 79 Light metals and their alloys /TR 8125:1984 /TR 11728:1993 TC 91 Surface active agents /TR 896:1977 TC 92 Fire safety /TR 12470:1998 TC 101 Continuous mechanical handling equipment /TR 5045:1979 /TR 5046:1977 /TR 5047:1982 /TR 8435:1984 TC 106 Dentistry /TR 13668:1998 TC 113 Hydrometry /TR 9210:1992 /TR 11656: :1996 (replaced by 18365:2013) /TR 8363:1997 (replaced by 18365:2013) /TR 9209:1989 /TR 11330:1997 /TR 11332:1998 /TR 11627:1998 /TR 9212:2006 TC 122 Packaging /TR :1983 TC 127 Earth-moving machinery /TR 9953:1996 TC 131 Fluid power systems 7181:1991 (replaced by 3320:2013) TC 132 Ferroalloys /TR 7955:1982 TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings /TR 10652:1991 TC 138 Plastics pipes, fittings and valves for the transport of fluids /TR 7073:1988 /TR 4191:1989 TC 147 Water quality /TR :1997 TC 155 Nickel and nickel alloys /TR 9721:1992 /TR 11434:1992 TC 162 Doors and windows /TR 10476:1990 TC 163 Thermal performance and energy use in the built environment /TR 9165:1988 TC 167 Steel and aluminium structures /TR 11069:1995 TC 172 Optics and photonics :1994 (replaced by :2013) :1994 (replaced by :2013) :1998 (replaced by :2013) /TR 11552:1997 TC 174 Jewellery /TR 11211:1995 TC 184 Automation systems and integration /TR 6132:1981 /TR :1997 TC 188 Small craft /TR 4558:1985 TC 204 Intelligent transport systems /TR :2000 /TR :2000 /TR :2000 TC 211 Geographic information/geomatics 19113:2002 (replaced by 19157:2013) 19114:2003 (replaced by 19157:2013) /TS (replaced by 19157:2013) 19138:2006 TMG Technical Management oard - groups IWA 2:2007 JTC 1 Information technology /IEC TR 6371:1989 /IEC TR 10730:1993 /IEC TR 10029:1989 /IEC TR 10172:1991 /IEC TR 13243:1999 Update, Supplement to Focus -- January

15 /IEC TR 13532:1995 /IEC TR 12182:1998 /IEC TR 14759:1999 /IEC TR 10182:1993 /IEC TR 14369:1999 /TR 9544:1988 /IEC TR 10037:1991 Meeting calendar (update at 01 December 2013) Meetings called for the month of November are not in this edition. * Information definite but meeting not yet formally convened ** Provisional January Cape Town TC 223 Societal security (South Africa) New Delhi (India) TC 69/SC 4 Applications of statistical methods/applications of statistical methods in process management Geneva (Switzerland) CSC/SPC Council/Strategy and Policy Committee (CSC/SPC) London (United TC 8/SC 8 Ships and marine technology/ship design 17 erlin (Germany) TC 46/SC 10 Information and documentation/ Requirements for document storage and conditions for preservation San José, California TC 247 Fraud countermeasures and controls 23 Paris (France) TC 17/SC 3 Steel/Steels for structural purposes Tokyo (Japan) TC 282 Water re-use Sydney (Australia) TC 71 Concrete, reinforced concrete and prestressed concrete erlin (Germany) TC 12 Quantities and units February St. Petersburg (Russian TC 172/SC 4 Optics and photonics/ Telescopic systems Federation) 5-7 irmingham PC 272 Forensic sciences (United Paris (France) TC 44/SC 3 Welding and allied processes/welding consumables Paris (France) TC 58/SC 4 Gas cylinders/operational requirements for gas cylinders Nairobi (Kenya) TC 285 Clean cookstoves and clean cooking solutions 12 Milan (Italy) TC 120/SC 3 Leather/Leather products Milan (Italy) TC 120 Leather 13 Milan (Italy) TC 120/SC 1 Leather/Raw hides and skins, including pickled pelts 14 Milan (Italy) TC 120/SC 2 Leather/Tanned leather New Delhi (India) TC 23/SC 18 Tractors and machinery for agriculture and forestry/irrigation and drainage equipment and systems 19 Geneva (Switzerland) London (United President's committee PC 286 President's committee Collaborative business relationship management -- Framework Milan (Italy) PC 280 Management Consultancy 21 erlin (Germany) TC 170 Surgical instruments 21 Stockholm (Sweden) Foz do Iguacu (razil) TC 213 PC 277 Dimensional and geometrical product specifications and verification Sustainable procurement Guilin (China) TM Technical Management oard Kuala Lumpur (Malaysia) PC 273 Customer contact centres (South America) ** JTC 1/SC 35 Information technology/user interfaces March Virtual (Unknown) CSC/FIN Council/Council Standing Committee on Finance (CSC/FIN) 12 Tokyo (Japan) TC 22/SC 21 Road vehicles/electrically propelled road vehicles 13 London (United 13 London (United 13 London (United 13 London (United TC 118/SC 1 TC 118/SC 3 TC 118/SC 4 TC 118/SC 6 Compressors and pneumatic tools, machines and equipment/process compressors Compressors and pneumatic tools, machines and equipment/pneumatic tools and machines Compressors and pneumatic tools, machines and equipment/compressed air treatment technology Compressors and pneumatic tools, machines and equipment/air compressors and compressed air systems 14 Update, Supplement to Focus -- January 2014

16 14 Rio de Janeiro (razil) 14 London (United 17 Geneva (Switzerland) Geneva (Switzerland) TC 94/SC 13 Personal safety -- Protective clothing and equipment/protective clothing TC 118 Compressors and pneumatic tools, machines and equipment * President's committee President's committee * COUNCIL Council 20 Osaka (Japan) TC 86/SC 1 Refrigeration and airconditioning/safety and environmental requirements for refrigerating systems 21 Singapore TC 104 Freight containers (Singapore) Warsaw (Poland) * TC 107/SC 4 Metallic and other inorganic coatings/ Hot dip coatings (galvanized, etc.) London (United * TC 130 Graphic technology Warsaw (Poland) TC 107 Metallic and other inorganic coatings 25 Warsaw (Poland) * TC 107/SC 3 Metallic and other inorganic coatings/ Electrodeposited coatings and related finishes 25 Warsaw (Poland) * TC 107/SC 7 Metallic and other inorganic coatings/ Corrosion tests 25 Warsaw (Poland) * TC 107/SC 8 Metallic and other inorganic coatings/ Chemical conversion coatings Madrid (Spain) PC 278 Anti-bribery management systems Paris (France) ** TC 274 Light and lighting March-April Casablanca (Morocco) PC 283 Occupational health and safety management systems - Requirements April Toronto (Canada) TC 117 Fans 2-3 erlin (Germany) TC 34/SC 11 Food products/ Animal and vegetable fats and oils 2-3 erlin (Germany) TC 265 Carbon dioxide capture, transportation, and geological storage 3 Paris (France) TC 67/SC 8 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Arctic operations 3 erlin (Germany) TC 255 iogas 4 Sydney (Australia) TC 198 Sterilization of health care products 7-10 Vitoria (razil) TC 102 Iron ore and direct reduced iron 7-11 Delft (Netherlands) TC 6 Paper, board and pulps 7-11 Lund (Sweden) TC 92 Fire safety 7-11 ologna (Italy) * TC 110/SC 4 Industrial trucks/ Rough-terrain trucks 7-11 Amsterdam (Netherlands) 7-11 Delft (Netherlands) * TC 161 Control and protective devices for gas and/or oil burners and appliances ** TC 257 General technical rules for determination of energy savings in renovation projects, industrial enterprises and regions 8-9 (Japan) ** TC 199 Safety of machinery 8-10 (razil) ** TC 67/SC 2 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries/ Pipeline transportation systems 8-10 Vitoria (razil) TC 102/SC 1 Iron ore and direct reduced iron/sampling 8-10 Vitoria (razil) TC 102/SC 2 Iron ore and direct reduced iron/chemical analysis 8-10 Vitoria (razil) * TC 102/SC 3 Iron ore and direct reduced iron/physical testing 9 Tokyo (Japan) TC 23/SC 19 Tractors and machinery for agriculture and forestry/agricultural electronics 9 Lund (Sweden) TC 92/SC 1 Fire safety/fire initiation and growth 9-11 usan (Korea, TC 112 Vacuum technology Republic of) 10 Delft (Netherlands) TC 6/SC 2 Paper, board and pulps/test methods and quality specifications for paper and board 10 Lund (Sweden) TC 92/SC 3 Fire safety/fire threat to people and environment 11 Lund (Sweden) TC 92/SC 4 Fire safety/fire safety engineering Maryland TC 267 Facilities management Hong Kong (Hong Kong, China) * JTC 1/SC 27 Information technology/it Security techniques Mishima (Japan) * TC 194 iological evaluation of medical devices (Europe) ** TC 167 Steel and aluminium structures angkok ** TC 34 Food products (Thailand) erlin (Germany) ** TC 34/SC 2 Food products/oleaginous seeds and fruits and oilseed meals May Washington, D.C 5-9 Washington, D.C TC 46/SC 4 Information and documentation/technical interoperability * TC 46 Information and documentation Update, Supplement to Focus -- January