Supplement to ISO Focus+

Transcription

1 Update Supplement to Focus+ August 2013

2 International Standards in process An International Standard is the result of an agreement between the member bodies of. A first important step towards an International Standard takes the form of a committee draft (CD) - this is circulated for study within an technical committee. When consensus has been reached within the technical committee, the document is sent to the Central Secretariat for processing as a draft International Standard (DIS). The DIS requires approval by at least 75 % of the member bodies casting a vote. A confirmation vote is subsequently carried out on a final draft International Standard (FDIS), the approval criteria remaining the same. CD registered Period from 01 July to 31 July 2013 These documents are currently under consideration in the technical committee. They have been registred at the Central Secretariat. PC 272 /CD TC 8 IEC/IEEE CD TC 17 /CD 4995 /CD 4996 /CD 4997 /CD 5003 TC 22 /CD /CD TR /DTS /CD /CD Forensic sciences Minimizing the risk of contamination in products used to collect and analyse biological material for forensic DNA purposes Ships and marine technology Cold ironing Part 2: High Voltage Shore Connection (HVSC) Systems Communication Interface Description Steel Hot-rolled steel sheet of structural quality Hot-rolled steel sheet of high yield stress structural quality Cold-reduced carbon steel sheet of structural quality Flat bottom railway rails and special rail sections for switches and crossings of non-treated steel Technical delivery requirements Road vehicles Diesel engines Fuel injection pumps and fuel injector low-pressure connections Part 1: Threaded connections Road vehicles Test procedures for evaluating child restraint system interactions with deploying air bags Procedure to construct injury risk curves for the evaluation of occupant protection in crash tests Motorcycles Verification of total running resistance force during mode running on a chassis dynamometer Electrically propelled mopeds and motorcycles Specifications and safety requirements for lithium-ion traction battery systems /CD TC 23 /CD TC 34 /CD 542 /DTR TC 35 /CD 4630 /CD 6271 Electrically propelled mopeds and motorcycles Principles and requirements for conductive charging Vehicle safety during charging from mains, grid and/or stationary external energy supply Tractors and machinery for agriculture and forestry Crop protection equipment Spray deposit tests of field crop sprayers Part 2: Spray deposit test in field crop Food products Oilseeds Sampling White tea Definition Paints and varnishes Clear liquids Estimation of colour by the Gardner colour scale Clear liquids Estimation of colour by the platinum-cobalt scale /CD 8623 Tall-oil fatty acids for paints and varnishes Specifications and test methods TC 37 Terminology and other language and content resources /CD /DTS /CD /CD TC 38 /CD TC 39 /DTR TC 45 /CD 1817 TC 46 /CD 7098 TC 58 /CD TC 60 /CD TC 69 /DTR Language resource management Syntactic annotation framework (SynAF) Part 2: XML serialization (<Tiger2/>) Language resource management Semantic annotation framework (SemAF) Part 5: Discourse structure (SemAF-DS) Language resource management Semantic annotation framework Part 7: Spatial information (-Space) Language resource management Controlled natural language Part 1: Basic concepts and general principles Textiles Textiles Determination of dynamic hygroscopic heat generation Machine tools Test code for machine tools Part 11: Measuring instruments suitable for machine tool geometry tests Rubber and rubber products Rubber, vulcanized or thermoplastic Determination of the effect of liquids Information and documentation Information and documentation Romanization of Chinese Gas cylinders Gas cylinders Identification and marking using radio frequency identification technology Part 2: Numbering schemes for radio frequency identification Gears Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials Applications of statistical methods Selected illustrations of contingency table analysis Update, Supplement to Focus -- August

3 TC 76 /CD TC 85 /CD 8769 /CD /CD TC 92 /CD /DTR TC 94 /CD /CD /CD TC 106 /CD TC 110 /CD TC 130 /CD TC 131 /CD /CD TC 133 /CD /CD /CD TC 146 /CD Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use Primary packaging materials for medicinal products Particular requirements for the application of 9001:2008, with reference to Good Manufacturing Practice (GMP) Nuclear energy, nuclear technologies, and radiological protection Reference sources Calibration of surface contamination monitors Alpha-, beta- and photon emitters Surveillance of airborne radioactive substances in the workplace of nuclear facilities Measurement of dose equivalent rate and estimation of personal dose equivalent from patients receiving iodine 131 administration after thyroid ablation Part 1: During the hospitalization Fire safety Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared spectroscopy (FTIR) Fire safety Engineering Performance of structure in fire Part 3: Example of an open car park Personal safety -- Protective clothing and equipment Respiratory protective devices Methods of test and test equipment Part 6: Mechanical resistance/strength of components Respiratory protective devices Methods of test and test equipment Part 10: Resistance to ignition, flame, radiant heat and heat Respiratory protective devices Methods of test and test equipment Part 13: RPD using regenerated breathable gas and special application mining escape RPD: Consolidated test for gas concentration, temperature, humidity, work of breathing, breathing resistance and duration Dentistry Dentistry Periodontal curettes, dental scalers and excavators Part 5: Jacquette scalers Industrial trucks Rough-terrain trucks - User requirements Part 2: Slewing variable-reach trucks Graphic technology Black point compensation Fluid power systems Connections for fluid power and general use Hydraulic couplings for diagnostic purposes Part 2: Coupling with M16 x 2 end for connection under pressure Hydraulic fluid power Test methods for couplings actuated with or without tools Clothing sizing systems - size designation, size measurement methods and digital fittings Size designation of clothes Part 1: Anthropometric definitions for body measurement Size designation of clothes Part 2: Primary and secondary dimension indicators Definition of virtual garment for digital fitting Air quality Workplace air Terminology TC 147 /CD /CD /CD /CD TC 149 Water quality Water quality Determination of fluoride using flow analysis (FIA and CFA) Part 1: Method using flow injection analysis (FIA) and spectrometric detection Water quality Determination of fluoride using flow analysis (FIA and CFA) Part 2: Method using continuous flow analysis (CFA) Water quality Determination of ph in sea water Method using the indicator dye m- cresol purple Water quality Enumeration of Legionella Cycles /CD Cycles Luggage carriers for bicycles Concepts, classification and testing /CD Cycles - Audio warning devices - Technical specification and test methods TC 210 Quality management and corresponding general aspects for medical devices IEC 62304:2006/ CD Amd 1 /CD TC 211 /CD /CD TC 215 /DTS /DTR TC 218 /CD 738 /CD 8903 /CD /CD /CD /CD /CD TC 229 /DTS TC 234 Medical device software Software life cycle processes Amendment 1 Small-bore connectors for liquids and gases in healthcare applications Part 1: General requirements Geographic information/geomatics Addressing Part 1: Conceptual model Geographic information Well known text representation of coordinate reference systems Health informatics Health informatics Principles and data requirements for consent in the collection, use, or disclosure of personal health information Application of risk management for IT-networks incorporating medical devices Part 2-6: Application guidance Guidance for responsibility agreements Timber Coniferous sawn timber Sizes Permissible deviations and shrinkage Broadleaved sawn timber Nominal sizes Physical and mechanical properties of wood - Test methods for small clear specimen Part 5: Testing in compression perpendicular to grain Physical and mechanical properties of wood - Test methods for small clear specimen Part 10: Determination of impact bending strength Physical and mechanical properties of wood - Test methods for small clear specimen Part 11: Determination of resistance to impact indentation Physical and mechanical properties of wood - Test methods for small clear specimen Part 12: Determination of static hardness Physical and mechanical properties of wood - Test methods for small clear specimen Part 17: Determination of compression parallel to grain Nanotechnologies Nanoparticles - Determination of muramic acid as a biomarker for silver nanoparticles activity Fisheries and aquaculture 2 Update, Supplement to Focus -- August 2013

4 /CD Traceability of Crustacean products Specifications on the information to be recorded in farmed Crustacean distribution chains /CD Traceability of Crustacean products Specifications on the information to be recorded in captured Crustacean distribution chains /CD Traceability of Molluscan products Specifications on the information to be recorded in farmed Molluscan distribution chains /CD Traceability of Molluscan products Specifications on the information to be recorded in captured Molluscan distribution chains TC 266 Biomimetics /CD Biomimetics Conception and strategy Differences between bionic and conventional methods/products /CD Biomimetics Biomimetic structural optimization CASCO Committee on conformity assessment /IEC DTS /IEC DTS JTC 1 /IEC 19793:2008/ PDAM 1 /IEC CD /IEC CD /IEC CD /IEC CD /IEC PDTR /IEC PDTS /IEC :2011/ PDAM 2 /IEC :2011/ PDAM 2 /IEC CD DIS circulated Conformity assessment Requirements for bodies providing audit and certification of management systems Part 5: Competence requirements for auditing and certification of asset management systems Conformity assessment Terminology related to competence of persons used for certification of persons Information technology Information technology Open Distributed Processing Use of UML for ODP system specifications Amendment 1 Identification cards Integrated circuit cards Part 6: Interindustry data elements for interchange Devices on cards Part 2: Physical characteristics Information technology - Security techniques - A framework for access management Information technology Metamodel framework for interoperability (MFI) Part 13: Metamodel for forms registration Virtual Experiments Information Technology for Learning, Education and Training Information Model for Competency Part 3: Guidelines for the Aggregation of Competency Information and Data Information technology Biometric data interchange formats Part 2: Finger minutiae data Amendment 2: XML encoding Information technology Biometric data interchange formats Part 4: Finger image data Amendment 2: XML encoding Code of practice for the implementation of a biometric system Period from 01 July to 31 July 2013 These documents have obtained substantial support within the appropriate technical committee. They have been submitted to the member bodies for voting by the date shown. * Available in English only Vote terminates TC 8 Ships and marine technology /DIS * Ships and marine technology Incinerator sizing and selection Guidelines /DIS * Ships and marine technology Ceramic weld backing for marine use TC 10 Technical product documentation /DIS * Technical product documentation Indication of dimensions and tolerances Part 2: Dimensioning of mechanical engineering drawings /DIS TC 17 /DIS * Specifications for diagrams for process industry Part 2: Measurement and control Steel * Steel and iron Determination of calcium and magnesium Inductively coupled plasma atomic emisson spectrometric method /DIS * Method for evaluation of hydrogen delayed fracture resistance of high strength steels TC 20 Aircraft and space vehicles /DIS * Space systems Programme management Statement of work TC 22 Road vehicles /DIS 8856 * Road vehicles Electrical performance of starter motors Test methods and general requirements (Revision of 8856:1995, 8856:1995/Amd 1:1997) /DIS /DIS /DIS TC 23 * Road vehicles Implementation of World-Wide Harmonized On- Board Diagnostics (WWH-OBD) communication requirements Part 6: External test equipment * Gasoline engines Medium pressure liquid fuel supply connections Part 1: 60 female cone connectors * Gasoline engines Medium pressure liquid fuel supply connections Part 2: Pipe assemblies Tractors and machinery for agriculture and forestry /DIS * Machinery for forestry Forwarders Terms, definitions and commercial specifications (Revision of 13860:2000) Update, Supplement to Focus -- August

5 TC 24 Particle characterization including sieving /DIS * Aerosol particle number concentration Calibration of condensation particle counters TC 31 /DIS /DIS TC 34 /DIS Tyres, rims and valves * Tubeless tyres Valves and components Part 1: Test methods (Revision of 14960:2004) * Tubeless tyres Valves and components Part 2: Clamp-in tubeless tire valve-test method Food products * Wheat and wheat flour Gluten content Part 2: Determination of wet gluten by mechanical means (Revision of :2006) /DIS * Microbiology of food and animal feed Detection of Trichinella Larvae in meat Physical method by digestion /DIS * Sensory analysis Assessment (determination and verification) of the shelf life of foodstuffs TC 38 Textiles /DIS * Superfine woven wool fabric labelling Requirements for Super S code definition /DIS * Textiles Determination of antiviral activity of textile products TC 39 /DIS TC 43 Machine tools Test conditions for machining centres Part 1: Geometric tests for machines with horizontal spindle (horizontal Z-axis) (Revision of :1998) Acoustics /DIS 9295 * Acoustics Determination of high-frequency sound power levels emitted by machinery and equipment (Revision of 9295:1988) :2010/DAmd 3 TC 44 * Acoustics Laboratory measurement of sound insulation of building elements Part 3: Measurement of impact sound insulation Amendment 3 Welding and allied processes /DIS * Safety of thermal cutting machines TC 45 Rubber and rubber products /DIS 1434 * Natural rubber in bales Amount of bale coating Determination (Revision of 1434:1995) TC 61 Plastics /DIS /DIS /DIS TC 68 /DIS TC 84 /DIS * Plastics Acrylonitrilestyrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials Part 1: Designation system and basis for specifications (Revision of :2002) * Plastics Methyl methacrylateacrylonitrile-butadiene-styrene (MABS) moulding and extrusion materials Part 1: Designation system and basis for specifications (Revision of :2002) * Plastics Polypropylene (PP) moulding and extrusion materials Part 1: Designation system and basis for specifications (Revision of :1995) Financial services * Banking Personal Identification Number management and security Part 2: Approved algorithms for PIN encipherment (Revision of :2005) Devices for administration of medicinal products and intravascular catheters * Intravascular catheters Sterile and single-use catheters Part 6: Subcutaneous implanted ports /DIS * Sterile, single-use intravascular catheter introducers (Revision of 11070:1998) TC 87 Cork /DIS 7322 * Composition cork Test methods (Revision of 7322:2000) TC 92 Fire safety /DIS * Controlled equivalence ratio method for the determination of hazardous components of fire effluents The steady state tube furnace (Revision of /TS 19700:2007) TC 94 Personal safety -- Protective clothing and equipment /DIS TC 106 * Respiratory protective devices Methods of test and test equipment Part 12: Determination of volume-averaged work of breathing and peak respiratory pressures Dentistry /DIS 9687 * Dentistry Graphical symbols for dental equipment TC 110 (Revision of 9687:1993) Industrial trucks Update, Supplement to Focus -- August 2013

6 /DIS TC 114 /DIS * Industrial Trucks Verification of stability Part 9: Counterbalanced trucks with mast handling freight containers of 6m (20 ft) length and longer Horology * Timekeeping instruments Movements Types, dimensions and nomenclature (Revision of 3764:2000) TC 131 Fluid power systems /DIS 8132 * Hydraulic fluid power Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) medium and 25 MPa (250 bar) series (Revision of 8132:2006) /DIS 8133 * Hydraulic fluid power Mounting dimensions for accessories for single rod cylinders, 16 MPa (160 bar) compact series (Revision of 8133:2006) /DIS * Hydraulic filter element test methods Thermal conditioning and cold start-up simulation /DIS TC 138 * Fluid power systems O-rings Part 5: Specification of elastomeric materials for industrial applications (Revision of :2002) Plastics pipes, fittings and valves for the transport of fluids /DIS * Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes and fittings Determination of the resistance to chemical attack for the inside of a section in a deflected condition (Revision of 10952:2008) /DIS TC 147 * Plastics piping systems Glass-reinforced thermosetting plastics (GRP) pipes Determination of initial specific ring stiffness and resistance to initial ring deflection using segment test pieces cut from a pipe Water quality /DIS * Water quality Simultaneous determination of tritium and carbon 14 activities Test method using liquid scintillation counting TC 150 Implants for surgery /DIS TC 158 * Implants for surgery Cardiac pacemakers Part 2: Reporting of clinical performance of populations of pulse generators or leads (Revision of :2000) Analysis of gases /DIS 6141 * Gas analysis Contents of certificates for calibration gas mixtures TC 163 (Revision of 6141:2000) Thermal performance and energy use in the built environment /DIS * Calculation of the impact of daylight utilization on the net and final energy demand for lighting TC 172 /DIS /DIS Optics and photonics * Ophthalmic implants Intraocular lenses Part 2: Optical properties and test methods (Revision of :1999, :1999/Cor 1:2003) * Ophthalmic implants Intraocular lenses Part 7: Clinical investigations (Revision of :2006) TC 174 Jewellery /DIS 9202 * Jewellery Fineness of precious metal alloys (Revision of 9202:1991) /DIS * Determination of platinum in platinum jewellery alloys Gravimetric method after precipitation of diammonium hexachloroplatinate (Revision of 11210:1995) /DIS * Determination of gold in gold jewellery alloys Cupellation method (fire assay) (Revision of 11426:1997) /DIS * Determination of silver in silver jewellery alloys Volumetric (potentiometric) method using potassium bromide (Revision of 11427:1993, 11427:1993/Cor 1:1994) /DIS * Determination of platinum in platinum jewellery alloys Gravimetric determination by reduction with mercury(i) chloride (Revision of 11489:1995) /DIS * Determination of palladium in palladium jewellery alloys Gravimetric determination with dimethylglyoxime (Revision of 11490:1995) /DIS * Jewellery Determination of platinum in platinum jewellery alloys ICP-OES method using yttrium as internal standard element (Revision of 11494:2008) /DIS * Jewellery Determination of palladium in palladium jewellery alloys ICP-OES method using yttrium as internal standard element (Revision of 11495:2008) /DIS * Determination of silver in silver jewellery alloys Volumetric (potentiometric) method using sodium chloride or potassium chloride (Revision of 13756:1997) /DIS * Jewellery Determination of precious metals in 999 0/00 gold, platinum and palladium jewellery alloys Difference method using ICP-OES (Revision of 15093:2008) Update, Supplement to Focus -- August

7 /DIS * Jewellery Determination of silver in 999 0/00 silver jewellery alloys Difference method using ICP-OES (Revision of 15096:2008) TC 182 Geotechnics /DIS * Geotechnical investigation and testing Geothermal testing Determination of thermal conductivity of soil and rock using a borehole heat exchanger TC 184 Automation systems and integration /DIS /DIS TC 188 * Industrial automation systems and integration Product data representation and exchange Part 209: Application protocol: Multidisciplinary analysis and design (Revision of :2001) * Industrial automation systems and integration Product data representation and exchange Part 242: Application protocol: Managed model-based 3D engineering (Revision of :1994, :1996, :2002, :2010, :2011) Small craft /DIS * Small craft Liquefied petroleum gas (LPG) systems TC 189 /DIS (Revision of 10239:2008) Ceramic tile * Ceramic tiles Part 1: Sampling and basis for acceptance (Revision of :1995) TC 201 Surface chemical analysis /DIS * Surface chemical analysis Determination of surface elemental contamination on silicon wafers by total-reflection X-ray fluorescence (TXRF) spectroscopy (Revision of 14706:2000) /DIS * Surface Chemical Analysis Atomic force microscopy Procedure for in situ characterization of AFM probe shank profile used for nanostructure measurement TC 204 Intelligent transport systems /DIS /DIS * Intelligent transport systems Framework for cooperative telematics applications for regulated commercial freight Vehicles (TARV) Part 6: Regulated applications * Intelligent transport systems Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) Part 8: Vehicle access management /DIS /DIS /DIS /DIS /DIS /DIS /DIS TC 210 /DIS TC 213 /DIS /DIS * Intelligent transport systems Framework for cooperative telematics applications for Regulated commercial freight vehicles (TARV) Part 11: Driver work records * Intelligent transport systems Framework for cooperative telematics applications for Regulated commercial freight vehicles (TARV) Part 12: Vehicle mass monitoring * Intelligent transport systems Framework for cooperative telematics applications for Regulated commercial freight vehicles (TARV) Part 14: Vehicle access control * Intelligent transport systems Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) Part 15: Vehicle location monitoring * Intelligent transport systems Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) Part 16: Vehicle speed monitoring * Intelligent transport systems Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) Part 17: Consignment and location monitoring * Intelligent transport systems - Public transport user information Part 1: Standards framework for public information systems Quality management and corresponding general aspects for medical devices * Small bore connectors for liquids and gases in healthcare applications Part 7: Connectors with % (Luer) taper for intravascular or hypodermic applications Dimensional and geometrical product specifications and verification * Geometrical Product Specifications (GPS) Inspection by measurement of workpieces and measuring equipment Part 5: Uncertainty in testing indicating measuring instruments * Geometrical product specifications (GPS) Dimensional tolerancing Part 3: Angular sizes TC 217 Cosmetics /DIS * Cosmetics Analytical methods Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC-MS-MS (Revision of 15819:2008) /DIS * Cosmetics Microbiology Microbiological limits Update, Supplement to Focus -- August 2013

8 TC 221 Geosynthetics /DIS * Geosynthetics Wide-width tensile test (Revision of 10319:2008) IULTCS International Union of Leather Technologists and Chemists Societies /DIS 3380 * Leather Physical and mechanical tests - Determination of shrinkage temperature up to 100 C (Revision of 3380:2002) /DIS * Leather Determination of flex resistance Part 2: Vamp flex method (Revision of 22288:2006) /DIS * Leather Physical and mechanical tests Determination of softness JTC 1 /IEC DIS /IEC DIS /IEC/IEEE DIS /IEC DIS (Revision of 17235:2011) Information technology * Information Technology Virtualization Management Specification * System and software engineering Information technology Governance of digital forensic risk framework * Software and systems engineering Software testing Part 4: Test techniques * Information technology Home network resource management Part 1: Requirements /IEC DIS /IEC :2012/DAmd 1 /IEC :2009/DAmd 3 /IEC DIS /IEC DIS /IEC DIS /IEC :2013/DAmd 1 * Information technology Coding of audio-visual objects Part 29: Web video coding * Information technology Multimedia application format (MPEG-A) Part 10: Surveillance application format Amendment 1: Conformance and reference software * Information technology Multimedia application format (MPEG-A) Part 11: Stereoscopic video application format Amendment 3: Support movie fragment for Stereoscopic Video AF * Information technology MPEG systems technologies Part 9: Common encryption of MPEG-2 transport streams * Information technology High efficiency coding and media delivery in heterogeneous environments Part 1: MPEG media transport (MMT) * Information technology Radio frequency identification (RFID) for item management: Data protocol Part 4: Application interface commands for battery assist and sensor functionality (Revision of /IEC 15961:2004) * Information technology Biometric data interchange formats Part 11: Signature/ sign processed dynamic data Amendment 1: Conformance test assertions /IEC DIS /IEC DIS /IEC :2012/DAmd 3 /IEC :2012/DAmd 4 * Information technology Security techniques Information security management systems Overview and vocabulary (Revision of /IEC 27000:2012) * Information technology Security techniques Selection, deployment and operations of intrusion detection systems (IDPS) (Revision of /IEC 18043:2006) * Information technology Coding of audio-visual objects Part 10: Advanced Video Coding Amendment 3: AVC compatible video-plus-depth extension * Information technology Coding of audio-visual objects Part 10: Advanced Video Coding Amendment 4: Additional colour space and tone mapping descriptors FDIS circulated Period from 01 July to 31 July 2013 These Final draft International Standards have been submitted to the member bodies for formal approval by the date shown * Available in English only TC 1 /FDIS Screw threads * Metric series wires for measuring screw threads Vote terminates /IEC :2012/DAmd 5 * Information technology Coding of audio-visual objects Part 10: Advanced Video Coding Amendment 5: Multi-resolution frame compatible stereo coding TC 6 /FDIS Paper, board and pulps * Paper and board Determination of air permeance (medium range) Part 3: Bendtsen method (Revision of :1992) Update, Supplement to Focus -- August

9 /FDIS /FDIS * Paper and board Determination of air permeance (medium range) Part 4: Sheffield method (Revision of :2005) * Paper and board Determination of air permeance (medium range) Part 5: Gurley method (Revision of :2003) TC 17 Steel /FDIS 6929 * Steel products Vocabulary (Revision of 6929:1987) /FDIS 5002 * Hot-rolled and cold-reduced electrolytic zinc-coated carbon steel sheet of commercial and drawing qualities (Revision of 5002:2008) TC 20 Aircraft and space vehicles /FDIS /FDIS /FDIS TC 22 /FDIS /FDIS /FDIS /FDIS /FDIS TC 23 /FDIS TC * Aerospace Hydraulic fluid components Expression of particulate contamination levels * Space systems Definition of the Technology Readiness Levels (TRLs) and their criteria of assessment * Space systems Programme management Requirements management Road vehicles * Internal combustion engines Piston rings Part 2: Rectangular rings made of steel (Revision of :2003) * Road vehicles 60 V and 600 V single-core cables Part 2: Dimensions, test methods and requirements for aluminium conductor cables (Revision of 6722:2006) * Road vehicles Communication between vehicle and external equipment for emissionsrelated diagnostics Part 4: External test equipment (Revision of :2005) * Road vehicles Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components Part 2: Performance and general test methods * Road vehicles Compressed gaseous hydrogen (CGH2) and hydrogen/natural gas blend fuel system components Part 3: Pressure regulator Tractors and machinery for agriculture and forestry * Agricultural irrigation equipment Filters for microirrigation Part 2: Strainer-type filters and disc filters (Revision of :1992) Small tools /FDIS TC 34 /FDIS TC 35 /FDIS /FDIS /FDIS /FDIS TC 42 /FDIS TC 44 /FDIS /FDIS TC 54 * Tool shanks with 7/24 taper for automatic tool changers Part 3: Retention knobs for shanks of forms AC, AD, AF, UC, UD, UF, JD and JF (Revision of :2007) Food products * Molecular biomarker analysis General definitions and requirements for microarray detection of specific nucleic acid sequences Paints and varnishes * Paints and varnishes Methods of exposure to laboratory light sources Part 1: General guidance (Revision of 11341:2004, 11507:2007) * Paints and varnishes Methods of exposure to laboratory light sources Part 2: Xenon-arc lamps (Revision of 11341:2004) * Paints and varnishes Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps (Revision of 11507:2007) * Paints and varnishes Methods of exposure to laboratory light sources Part 4: Open-flame carbon-arc lamps Photography * Imaging materials Digital hard copy for medical imaging Methods of measuring permanence Welding and allied processes * Quality requirements for welding Resistance welding of metallic materials Part 1: Comprehensive quality requirements (Revision of :2000) * Quality requirements for welding Resistance welding of metallic materials Part 2: Elementary quality requirements (Revision of :2000) Essential oils /FDIS 9841 * Essential oil of hyssop (Hyssopus officinalis L. ssp. officinalis) TC 58 /FDIS TC 60 /FDIS (Revision of 9841:2007) Gas cylinders * Gas cylinders Cylinder valves Manufacturing tests and examinations (Revision of 14246:2001) Gears * Calculation of load capacity of bevel gears Part 1: Introduction and general influence factors (Revision of :2001) Update, Supplement to Focus -- August 2013

10 /FDIS * Calculation of load capacity of bevel gears Part 2: Calculation of surface durability (pitting) /FDIS * Non-destructive testing Penetrant testing Part 2: Testing of penetrant materials (Revision of :2001) (Revision of :2006) /FDIS * Calculation of load capacity of bevel gears Part 3: Calculation of tooth root strength /FDIS * Non-destructive testing Penetrant testing Part 3: Reference test blocks TC 67 /FDIS TC 85 /FDIS /FDIS TC 113 /FDIS (Revision of :2001) Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries * Petroleum and natural gas industries General requirements for offshore structures (Revision of 19900:2002) Nuclear energy, nuclear technologies, and radiological protection * Radiation protection Performance criteria for service laboratories performing biological dosimetry by cytogenetics (Revision of 19238:2004) * Determination of solubility in nitric acid of plutonium in unirradiated mixed oxide fuel pellets (U, Pu) O2 (Revision of 12184:1994) Hydrometry * Hydrometry Selection, establishment and operation of a gauging station /FDIS /FDIS TC 147 /FDIS /FDIS /FDIS (Revision of :1998, :1998/Cor 1:2001) * Non-destructive testing Equipment for eddy current examination Part 1: Instrument characteristics and verification (Revision of :2008, :2008/Cor 1:2010) * Non-destructive testing Equipment for eddy current examination Part 2: Probe characteristics and verification (Revision of :2008) Water quality * Water quality Determination of selected parameters by discrete analysis systems Part : Ammonium, nitrate, nitrite, chloride, orthophosphate, sulfate and silicate with photometric detection * Water quality Lead-210 Part 1: Test method using liquid scintillation counting * Water quality Enumeration of Clostridium perfringens Method using membrane filtration TC 123 /FDIS (Revision of :1996, /TR 8363:1997) Plain bearings * Hydrodynamic plain journal bearings under steady-state conditions Circular cylindrical bearings Part 1: Calculation procedure (Revision of :1998) /FDIS 2795 * Plain bearings Sintered bushes Dimensions and tolerances TC 131 /FDIS /FDIS TC 135 (Revision of 2795:1991) Fluid power systems * Connections for general use and fluid power Ports and stud ends with threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports (Revision of :2007) * Connections for general use and fluid power Ports and stud ends with threads with elastomeric or metal-tometal sealing Part 2: Heavyduty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E) (Revision of :2007, :2007/DAmd 1) Non-destructive testing /FDIS TC 150 /FDIS TC 156 /FDIS TC 190 /FDIS TC 193 /FDIS * Water quality Determination of toxicity of fresh water sediments using Hyalella azteca Implants for surgery * Implants for surgery Partial and total hip joint prostheses Part 6: Endurance properties testing and performance requirements of neck region of stemmed femoral components (Revision of :1992) Corrosion of metals and alloys * Corrosion of metals and alloys Corrosion in artificial atmosphere Accelerated corrosion test involving exposure under controlled conditions of humidity cycling and intermittent spraying of a salt solution (Revision of 16701:2003) Soil quality * Soil quality Effects of pollutants on Enchytraeidae (Enchytraeus sp.) Determination of effects on reproduction (Revision of 16387:2004) Natural gas * Natural gas Organic components used as odorants Requirements and test methods Update, Supplement to Focus -- August

11 TC 204 /FDIS /FDIS /FDIS TC 205 /FDIS TC 206 /FDIS IULTCS /FDIS JTC 1 /IEC/ IEEE FDIS AB /IEC/ IEEE FDIS AR /IEC/ IEEE FDIS AS (Revision of 13734:1998, 13734:1998/Cor 1:1999) Intelligent transport systems * Intelligent transport systems Traffic and travel information messages via traffic message coding Part 1: Coding protocol for Radio Data System Traffic Message Channel (RDS-TMC) using ALERT-C (Revision of :2003) * Intelligent transport systems Traffic and travel information messages via traffic message coding Part 2: Event and information codes for Radio Data System Traffic Message Channel (RDS-TMC) using ALERT-C (Revision of :2003) * Intelligent transport systems Traffic and travel information messages via traffic message coding Part 3: Location referencing for Radio Data System Traffic Message Channel (RDS-TMC) using ALERT-C (Revision of :2004) Building environment design * Heating systems in buildings Method and design for calculation of the system energy performance Combustion systems (boilers) Fine ceramics * Fine ceramics (advanced ceramics, advanced technical ceramics) Light source for testing semiconducting photocatalytic materials used under indoor lighting environment International Union of Leather Technologists and Chemists Societies * Leather Chemical tests Determination of tan content in synthetic tanning agents Information technology * Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Part 1AB: Station and media access control connectivity discovery * Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Part 1AR: Secure device identity * Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Part 1AS: Timing and synchronization for timesensitive applications in bridged local area networks /IEC FDIS /IEC FDIS /IEC FDIS /IEC FDIS * Information technology Security techniques Information security management systems Requirements (Revision of /IEC 27001:2005) * Information technology Security techniques Code of practice for information security controls (Revision of /IEC 27002:2005) * Information technology Vocabulary Part 36: Learning, education and training (Revision of /IEC :2008, /IEC :2008/ Cor 1:2012, /IEC :2008/DAmd 1) * Information technology for learning, education and training Language accessibility and human interface equivalencies (HIEs) in e-learning applications Part 1: Framework and reference model for semantic interoperability Standards published New International Standards published between 01 July and 31 July 2013 * Available in English only ** French version of standard previously published in English only TC :2012 TC 6 217: : :2013 TC 17 Fasteners Prevailing torque type hexagon thin nuts (with non-metallic insert) Paper, board and pulps Paper Untrimmed sizes Designation and tolerances for primary and supplementary ranges, and indication of machine direction * Paper, board and pulps Determination of cadmium content Atomic absorption spectrometric method Corrugated fibreboard Determination of edgewise crush resistance (unwaxed edge method) Steel Price group B B C D 10 Update, Supplement to Focus -- August 2013

12 4967:2013 Steel Determination of content of non-metallic inclusions Micrographic method using standard diagrams R 9038:2013 Determination of sustained combustibility of liquids F TC 20 Aircraft and space vehicles 6517:2013 * Air cargo Certified lower deck containers Design and testing TC :2013 TC 22 Equipment for fire protection and fire fighting * Fire detection and alarm systems Part 14: Design, installation, commissioning and service of fire detection and fire alarm systems in and around buildings Road vehicles 6623:2013 * Internal combustion engines Piston rings Scraper rings made of cast iron : : :2013 TC : :2013 TC :2013 TC :2013 * Internal combustion engines Piston rings Part 2: Coil-spring-loaded oil control rings of narrow width made of cast iron * Internal combustion engines Piston pins Part 1: General specifications * Road vehicles Communication between vehicle and external equipment for emissions-related diagnostics Part 7: Data link security Tractors and machinery for agriculture and forestry Agricultural machinery Agricultural trailers and trailed equipment Drawbar jacks Agricultural tractors Requirements, test procedures and acceptance criteria for the operator's field of vision Part 1: Field of vision to the front Particle characterization including sieving * Particle characterization of particulate systems Vocabulary Solid mineral fuels * Coal Determination of bulk density for the use in charging of coke ovens 1170:2013 * Coal and coke Calculation of analyses to different bases 11722: :2013 TC 28 * Solid mineral fuels Hard coal Determination of moisture in the general analysis test sample by drying in nitrogen * Coal Ultimate analysis Petroleum products and lubricants L T M R M C F E T C D C C 9162:2013 TC : :2013 TC :1992/Amd 1:2013 /TS 18083: :2007/ Amd 1:2013 Petroleum products Fuels (class F) Liquefied petroleum gases Specifications B Tyres, rims and valves Aircraft tyres and rims Part 1: Specifications Aircraft tyres and rims Part 2: Test methods for tyres Food products Rapeseed Determination of glucosinolates content Part 1: Method using high-performance liquid chromatography Amendment 1 * Processed cheese products Calculation of content of added phosphate expressed as phosphorus Microbiology of food and animal feeding stuffs General requirements and guidance for microbiological examinations Amendment :2013 Animal and vegetable fats and oils Determination of saponification value 3961:2013 Animal and vegetable fats and oils Determination of iodine value TC 36 Cinematography 4241:2013 * Cinematography Theatre projection leader, trailer and cue marks Specifications F TC : : :2013 TC :2013 TC :2000/ Amd 1: :2013 Textiles Textiles Quantitative chemical analysis Part 25: Mixtures of polyester and certain other fibres (method using trichloroacetic acid and chloroform) Textiles Determination of antibacterial activity of textile products Woven fabrics Distortion Determination of skew and bow Machine tools Machine tools Safety Electrodischarge machines Acoustics Acoustics Measurement of airborne sound emitted by vessels on inland waterways and harbours Amendment 1 Acoustics Railway applications Measurement of noise emitted by railbound vehicles P H XZ A V E E B P E U XZ U Update, Supplement to Focus -- August

13 /PAS :2013 Acoustics Method for measuring the influence of road surfaces on traffic noise Part 4: SPB method using backing board E 14998:2013 * Petroleum and natural gas industries Downhole equipment Completion accessories S 20906:2009/ Amd 1:2013 Acoustics Unattended monitoring of aircraft sound in the vicinity of airports Amendment 1 XZ 27509:2012/ Cor 1:2013 * Petroleum and natural gas industries Compact flanged connections with IX seal ring Technical Corrigendum 1 free TC 44 Welding and allied processes 9312:2013 Resistance welding equipment Insulated pins for use in electrode back-ups B 19902:2007/ Amd 1:2013 TC 68 * Petroleum and natural gas industries Fixed steel offshore structures Amendment 1 Financial services XZ :2013 * Welding and allied processes Classification of geometric imperfections in metallic materials Part 2: Welding with pressure M 6166:2013 * Securities and related financial instruments International securities identification numbering system (ISIN) F :2012/Cor :2013 TC :2013 Qualification testing of welders Fusion welding Part 1: Steels Technical Corrigendum 2 Welding personnel Qualification testing of welding operators and weld setters for mechanized and automatic welding of metallic materials Rubber and rubber products Rubber and latices Nomenclature free G C TC 69 /TS 28037:2010 TC :2013 Applications of statistical methods Determination and use of straight-line calibration functions Internal combustion engines * Methods of test for full-flow lubricating oil filters for internal combustion engines Part 5: Test for cold start simulation and hydraulic pulse durability V D 18899:2013 Rubber Guide to the calibration of test equipment H TC :2013 Light metals and their alloys Anodizing of aluminium and its alloys Terms and definitions G TC :2013 TC :2001/Amd 1: :1999/ Amd 1: :2013 TC : :2013 TC 67 Essential oils Essential oil of vetiver [Chrysopogon zizanioides (L.) Roberty, syn. Vetiveria zizanioides (L.) Nash] Gas cylinders Gas cylinders Parallel threads for connection of valves to gas cylinders Part 1: Specification Amendment 1 Gas cylinders Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l Design construction and testing Amendment 1: Requirements for design of tubes for embrittling gases * Gas cylinders Refillable composite reinforced tubes of water capacity between 450 L and 3000 L Design, construction and testing Plastics Adhesives Adhesives for bonding parquet to subfloor Test methods and minimum requirements * Carbon fibre Determination of volume resistivity Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries F XZ XZ S E C TC :2013 TC 92 /TR 15657:2013 /TR :2013 TC : : : :2013 Nuclear energy, nuclear technologies, and radiological protection Radiological protection Minimum criteria for electron paramagnetic resonance (EPR) spectroscopy for retrospective dosimetry of ionizing radiation Part 1: General principles Fire safety Fire resistance tests Guidelines for computational structural fire design Fire safety engineering Assessment, verification and validation of calculation methods Part 2: Example of a fire zone model Personal safety -- Protective clothing and equipment Personal protective equipment Test methods for sunglasses and related eyewear * Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications Part 1: Specification for products * Eyewear for protection against intense light sources used on humans and animals for cosmetic and medical applications Part 2: Guidance for use Protective clothing General requirements J W L X P J L 12 Update, Supplement to Focus -- August 2013

14 TC :2013 Cranes Cranes and hoists Selection of wire ropes, drums and sheaves L :2013 * Graphic technology Process control for the production of half-tone colour separations, proof and production prints Part 7: Proofing processes working directly from digital data L TC :2013 TC 104 Bases for design of structures * Bases for design of structures Loads, forces and other actions Seismic actions on nonstructural components for building applications Freight containers 668:2013 * Series 1 freight containers Classification, dimensions and ratings S J 16759:2013 TC :2013 * Graphic technology Quantification and communication for calculating the carbon footprint of print media products Plastics pipes, fittings and valves for the transport of fluids Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Part 3: Lining with close-fit pipes S H TC :2013 Steel wire ropes * Steel wire ropes Determination of the transverse rigidity of steel wire ropes under no axial load condition C TC 159 /TS :2013 Ergonomics * Usability of consumer products and products for public use Part 2: Summative test method T TC :2008/ Amd 1: :2013 TC :2013 TC 110 Dentistry Dentistry Evaluation of biocompatibility of medical devices used in dentistry Amendment 1: Positive control material Dentistry Minimal dental implant data set for clinical use Mechanical vibration, shock and condition monitoring Mechanical vibration and shock Hand-arm vibration Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand Industrial trucks XZ C M TC : :2010/Cor 1: : :2008 Thermal performance and energy use in the built environment * Energy performance of buildings Methods for expressing energy performance and for energy certification of buildings Thermal performance of windows and doors Determination of thermal transmittance by the hot-box method Part 1: Complete windows and doors Technical Corrigendum 1 Hygrothermal performance of building materials and products Determination of hygroscopic sorption properties Energy performance of buildings Calculation of energy use for space heating and cooling Q free J XC :2011/Cor 1:2013 * Industrial trucks Safety requirements and verification Part 1: Selfpropelled industrial trucks, other than driverless trucks, variable-reach trucks and burden-carrier trucks Technical Corrigendum 1 free TC :2013 Optics and photonics Lasers and laser-related equipment Laser device Minimum requirements for documentation F TC :2013 Powder metallurgy Hardmetals Determination of (the magnetization) coercivity TC 120 Leather 5431:2013 * Leather Wet blue goat skins Specification 5432:2013 * Leather Wet blue sheep skins Specification TC 122 Packaging A B B TC :2013 TC 184 /TR 18161:2013 TC 185 Assistive products for persons with disability Wheelchairs Part 25: Batteries and chargers for powered wheelchairs Automation systems and integration * Automation systems and integration Applications integration approach using information exchange requirements modelling and software capability profiling Safety devices for protection against excessive pressure J R 16495:2013 Packaging Transport packaging for dangerous goods Test methods U :2013 Safety devices for protection against excessive pressure Part 1: Safety valves G TC 126 Tobacco and tobacco products 8243:2013 * Cigarettes Sampling :2013 Safety devices for protection against excessive pressure Part 4: Pilot operated safety valves H F TC 130 Graphic technology Update, Supplement to Focus -- August