Monthly Notifications Register

Transcription

1 Information procedure Page 1 Monthly Notifications Register Notifications registered at CCMC from to Register issued on : A list of subsectors can be found at the end of this document.

2 Information procedure Page 2 Monthly Notifications Register Notifications registered at CCMC from to Sector A : SERVICES Register issued on :

3 Subsector A09: FACILITY MANAGEMENT Page 3 Subsector : A09 Registration Date : Project ID : tst09782/0001 Project Established Facilities and equipment for receipt and delivery of liquid fuels (Stanag 3756) This standard covers the facilities and equipment for receipt and delivery of liquid fuels in FEBA. International : Modified STANAG 3756 ED.4:2002 Subsector A11: SAFETY AND SECURITY Subsector : A11 Registration Date : Project ID : tst12420/0001 Project Established , , Competent services for pressured vessels and tanks Rules This standard includes rules for operating, structural feature, technical equipment, personnel specifications and certification of competent services of pressure vessels and tanks 300 liters and above, below and above ground in the used liquid or gaseous LPG, CNG, oxygen, nitrogen, acetylene, etc. gases for applications with a cryogenic. Subsector : A11 Registration Date : Project ID : tst12425/0001 Project Established Authorized services for printing machines Rules This standard includes rules for operating, structural feature, technical equipment, personnel specifications and certification of authorized services of printing machines Subsector : A11 Registration Date : Project ID : tst12510/0001 Project Established Authorized services for Earth and moving machinery Rules

4 Page 4 This standard includes rules for operating, structural feature, technical equipment, personnel specifications and certification of authorized services of earth and moving machinery. Subsector : A11 Registration Date : Project ID : tst12658/0001 Project Established , Authorized services for Agricultural equipment and machinery - for moving and transporting equipments - Rules This standard includes rules for operating, structural feature, technical equipment, personnel specifications and certification of authorized services of agricultural equipment and machinery - for moving and transporting equipments. Subsector : A11 Registration Date : Project ID : tst12683/0001 Project Established , Authorized services- For textile and clothes machines Rules This standard includes rules for operating, structural feature, technical equipment, personnel specifications and certification of authorized services of textile and clothes machines. Subsector : A11 Registration Date : Project ID : tst12690/0001 Project Established , Competent services for solar energy systems Rules This standard includes rules for operating, structural feature, technical equipment, personnel specifications and certification of competent services of solar energy systems. Subsector : A11 Registration Date :

5 Page 5 Project ID : tst12849/0001 Project Established , Authorized services for alarm equipments. - Rules This standard includes rules for operating, structural characteristics, technical equipment personal specifications and certification of competent services for alarm equipment - Rules. Subsector : A11 Registration Date : Project ID : tst13150/0001 Project Established Authorized services for paper cutting machinery Rules This standard includes rules for operating, structural feature, technical equipment, personnel specifications and certification of authorized services of paper cutting machinery of (paper slitting machine, paper roll cutting machine, paper roll cutting machine etc.) Subsector : A11 Registration Date : Project ID : tst13165/0001 Project Established Authorized services for topographic surveying instruments - Rules This standard includes rules for managements, structural characteristics, technical equipment and personal characteristics of topographic surveying instruments. Subsector : A11 Registration Date : Project ID : tst13273/0001 Project Established , Authorized services for sewing machines Rules This standard includes rules for operating, structural feature, technical equipment, personnel specifications and certification of authorized services of sewing machines used in home and similar places.

6 Subsector : A11 Registration Date : Project ID : tst13288/0001 Project Established , Competent services for asphalt and/or concrete processing machinery - Rules This standard includes rules for operating, structural feature, technical equipment, personnel specifications and certification of competent services of constitutive hydraulic system all of asphalt and/or concrete processing machinery. Page 6 Subsector : A11 Registration Date : Project ID : tst94265/0001 Project Established Authorized services for automatic parking structures - Rules This standard includes rules for operating, structural characteristics, technical equipment personal specifications and certification of competent services for automatic parking structures - Rules. Subsector A12: CONSULTANCY SERVICES Subsector : A12 Registration Date : UNI Italy Project ID : 8300A030/0001 Project Established U8300A030 Coaching - Definitions, classification, requirements and service offer This standard is a guide to the characteristics of the service of Coaching ***, from quotation to closing the path. It defines the features that are considered to constitute good practice in the management of the service. *** Coaching Service: partnership, process aimed at reaching the objectives of the client, throughout appreciation and empowerment of the client's resources and performances personal and professional Subsector : A12 Registration Date : UNI Italy Project ID : 8300A050/0001 Project Established

7 U8300A050 Management consulting - Management control - Guideline for the design and implementation of a management control model for SME The standard defines the guidelines on two key issues: 1. Practical Guidelines for SMEs (including micro enterprises) those want to approach and implement a effective model of management control 2. Qualification of suppliers of consultancy services in the field of management control Content of the standard Terminology (general and specific) normative References Managing a project on management control Initial analysis of the needs Check consistency with the general ledger Indicators and indices and their validation Testing the Project Review of the project Periodic reporting Monitoring Qualification of supplier and team work Bibliography Page 7 Subsector : A12 Registration Date : UNI Italy Project ID : 8300A060/0001 Project Established U8300A060 Services - Non formal education management system - Guideline for the application of UNI ISO The standard provides guidance for the application of UNI ISO 29990, in particular the essential documents to be prepared, particular for the business plan (including economical and financial feasibility), in the medium/long period and risk assessment, with reference to the possible application of the principles of ISO The standard provides guidance for the internal audits. The standard will also include a brief list of the main topics to be evaluated and the main evidences for the verification of compliance, including the selfdeclaration process. Subsector A99: UNDETERMINED Subsector : A99 Registration Date : DIN Germany Project ID : /0001 Project Established

8 Job related proficiency assessment Page 8 Subsector : A99 Registration Date : Project ID : tst10347/0001 Project Established , Kindergarden- General rules This standard includes general rules for physical structure, management rules and personnel characteristics of kindergarden. Subsector : A99 Registration Date : Project ID : tst12524/0001 Project Established General Rules For Cleaning Services This standard includes rules for structural characteristics, operating, personal of cleaning services ** End of Sector **

9 Information procedure Page 9 Monthly Notifications Register Notifications registered at CCMC from to Sector B : BUILDING AND CONSTRUCTION Register issued on :

10 Subsector B01: FIRE PROTECTION Page 10 Subsector : B01 Registration Date : DIN Germany Project ID : /0001 Project Established DIN Pressure limitation valve, nominal pressure 16 Subsector : B01 Registration Date : DIN Germany Project ID : /0001 Project Established Firefighting vehicles - Part 5: Group pumping appliance LF 10; Amendment A1 Subsector : B01 Registration Date : DIN Germany Project ID : /0001 Project Established Firefighting vehicles - Part 26: Group pumping appliance for rescue operations HLF 10; Amendment A1 Subsector B02: STRUCTURES Subsector : B02 Registration Date : SIST Draft Issue Date : Slovenia Latest Date for Comments : Project ID : /0001 Project Established dsist 1037:2013 Bitumen and bituminous binders Bitumen solutions for priming Requirements This national standard defines national requirements which supplement the European standard and which are not in conflict with the requirements in the European standard. The national standard contains clearly-defined criteria for the essential characteristics of materials with regard to climate conditions in our country

11 Page 11 Subsector : B02 Registration Date : SIST Draft Issue Date : Slovenia Latest Date for Comments : Project ID : /0001 Project Established dsist 1039:2013 Flexible sheets for waterproofing - Plastic and rubber damp proof courses This national standard defines national requirements which supplement the European standard and which are not in conflict with the requirements in the European standard. The national standard contains clearly-defined criteria for the essential characteristics of materials with regard to climate conditions in our country Subsector : B02 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM A Digital structure documentation - Part 2: Building Information Modeling (BIM) - Level 3- ibim The present Austrian Standard specifies the technical implementation of a unified, structured 3plus-dimensioned data model for building construction and related spatial civil engineering constructions based on Building Information Modeling (BIM). The data model represents the basis for the cooperation (technical implementation of data exchange and of a common data model as well as of data storage of information) of all those taking part in the the life time cycle management, starting from the idea, planning and execution, economic control up to demolition and disposal. This ÖNORM provides the bases for a comprehensive, unified, product-neutral, systematized exchange of graphical and meta data. The possibility of reverse compatibility with ÖNORM A is integrated part of the present standard. Subsector : B02 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM A Digital structure documentation - Part 1: CAD-data structures and Building Information Modeling (BIM) - Level 2 The present Austrian Standard specifies the technical implementation of data exchange and data storage for information on building construction and related spatial civil engineering constructions which are required during the life time cycle management of real estate property. The digital documentation and/or template file are being offered by the Austrian Standards Institute under html. A complete listing of these files is given in Annex H.

12 Page 12 Subsector B06: GYPSUM Subsector : B06 Registration Date : AENOR Spain Latest Date for Comments : Project ID : P /0002 Draft for public enquiry PNE Gypsum rock. Characterization This standard sets the technical specifications that has to satisfy gypsum mineral to be raw material for manufacturing plasters, in the construction sector. REV/AMD UNE :1986 Subsector B07: GLASS Subsector : B07 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM B Glass in building - Structural glass construction - Part 7: Applications for glass The present Austrian Standard provides applications for glass based on ÖNORM B 3716 (all parts). Subsector B08: DOORS AND WINDOWS Subsector : B08 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM B Internal doors - Part 10: Steel frames for gypsum plasterboard walls This Austrian Standard shall be applied jointly with ÖNORM ; it includes complementary requirements for steel cases produced from wrought or extruded steel sheet profiles, intended to be incorporated into in gypsum plasterboard walls. It applies to cases for rebated and butt (unrebated) single leaf doors with a mass of maximum 60 kg. For the installation of steel cases, gypsum plasterboards as well as of frames, ÖNORM B 5335, ÖNORM B and ÖNORM B 3415 apply.

13 Page 13 Subsector : B08 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM B Internal doors - Part 8: Steel frames for solid walls This Austrian Standard shall be applied jointly with ÖNORM ; it includes complementary requirements for steel cases produced from wrought or extruded steel sheet profiles, intended to be incorporated into solid walls. It applies to rebated and butt (unrebated) single leaf doors with a mass of maximum 90 kg. For steel cases installed in gypsum plasterboard walls, ÖNORM B applies. For the installation of steel cases, ÖNORM B 5335 shall be used; mounting instructions of the case manufacturers should also be observed. Subsector B09: THERMAL MATTERS Subsector : B09 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM B External thermal insulation composite systems (ETICS) - Part 2: Products This Austrian Standard specifies the characteristic values and basic features of products, which are necessary for the application of ETICS according to ÖNORM B Evidence of these hast to be provided within the framework of the declaration of performance. In addition, this ÖNORM includes specifications for system components, accessory products and national proofs, e.g. for wind load. Subsector : B09 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM B External thermal insulation composite systems (ETICS) - Part 1: Planning and processing The present Austrian Standard includes basic principles for planning and processing of external thermal insulation composite systems (ETICS) in building construction and applies to all insulating material thicknesses. This ÖNORM shall be used for external thermal

14 Page 14 insulation composite systems (ETICS) on external building parts, on vertical surfaces as well as on surfaces which are not directly exposed to weathering (e.g. soffits). It only applies to bonded ETICS and to bonded ETICS with additional mechanical fixing and contains the basics for the standard safety proof. The ETICS have to provide a declaration of performance and to comply with the requirements according to ÖNORM B The connection of ETICS to windows and door height windows is not part of this ÖNORM. Subsector B10: TIMBER STRUCTURES Subsector : B10 Registration Date : AFNOR France Project ID : FA185567/0001 Project Established PR NF DTU 31.2 P3 DTU Building works. Timberframe houses and buildings construction. Part 3: Conception rules Subsector : B10 Registration Date : AFNOR France Project ID : FA185573/0001 Project Established PR NF DTU 51.4 P1-1 DTU Building works - Floors of timber or wood-based panels - Part 1-1: Technical specifications Subsector B13: SOLAR ENERGY Subsector : B13 Registration Date : AENOR Spain Project ID : P /0001 Project Established PNE Tests for verification of operating parameters on solar thermal electric plants with technology of parabolic trough collectors This standard provides procedures and guidelines to carry out tests in solar thermal electric plants based on the technology of parabolic trough collector to determine its operating parameters with an acceptable uncertainty

15 Page 15 Subsector B14: GEOTECHNICS Subsector : B14 Registration Date : AFNOR France Project ID : FA185491/0001 Project Established PR NF P Soils : Investigation and testing - Determination of the compaction characteristics of a soil - Standard Proctor Test - Modified Proctor Test Subsector B15: SANITARY APPLIANCES Subsector : B15 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM M Verification of heating systems - Part 6: Periodic inspection of combined heat and power plants This Standard represents the technical basis for assessment of emissions of combined heat and power plants. Subsector : B15 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM M Verification of heating systems - Part 7: Periodic inspection of heat pumps The present Austrian Standard defines the technical basis for energetic assessment of heat pumps. Subsector B20: DRAINAGE EQUIPMENT Subsector : B20 Registration Date : ASI Austria

16 Page 16 Project ID : /0001 Project Established , , , ÖNORM B Corrosion protection by organic coatings for water and waste engineering in residential areas - Testing of protective materials and requirements This ÖNORM specifies requirements for protective materials based on organic basis and their testing. These protective materials are applied in sanitary and industrial engineering on the carrier material of parts of tubes and plants of the water supply, sewage disposal and purification for the purposes of ÖNORMEN B and Subsector : B20 Registration Date : ASI Austria Project ID : /0001 Project Established , , , ÖNORM B Corrosion protection by organic coatings for water and waste engineering in residential areas - Testing of corrosion protection and requirements This ÖNORM is used for the testing of the applied surface protection of the carrier material of parts of tubes and plants of the water supply, sewage disposal and purification for the purposes of ÖNORMEN B and For other carrier materials, the provisions of ÖNORM B can be applied analogously. Excluded from testing is the surface protection of machines, machine parts and steel structures and the surface protection of pipes and tanks, which serves only the temporary protection for storage and transport. Subsector B21: BATHS Subsector : B21 Registration Date : ASI Austria Project ID : /0001 Project Established , , ÖNORM M 6213 Sole tubs - Requirements for treatment, operation, maintenance and inspection This ÖNORM applies for sole tubs which are used by one person and specifies requirements for the treatment of the sole as well as guidelines concerning operation, maintenance and inspection of the system. Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT Subsector : B25 Registration Date : NEN

17 Page 17 Netherlands Project ID : /0001 Project Established NPR :2013 Concept nl Code of practice gas installations - Section gaspipework - Part 1: Determination of gas tightness of the gas installation - Standard method - Guidelines for NEN 1078 and NEN 8078 With the procedures of this code of practice the tightness of a gas installation for household use can be determined. Subsector : B25 Registration Date : NEN Netherlands Project ID : /0001 Project Established NPR :2013 Concept nl Code of practice for gas installations - Section gas pipe work - Part 2: Supplementary methods on the determination of gas tightness of the gas installation This part applies to clause 5.3 of NEN This document giv es in addition to the standard determination method to determine the tightness of gas installations, extra possibilities to determine if the specifications of NEN 1078 are met. Subsector B26: ROAD BUILDING AND MAINTENANCE Subsector : B26 Registration Date : SNV Draft Issue Date : Switzerland Latest Date for Comments : Project ID : CH130038/0001 Draft for public enquiry SN Concrete ceiling; Conception, design, requirements on the built-in surfaces REV/AMD SN b (2008) Subsector : B26 Registration Date : AFNOR France Project ID : FA185266/0001 Project Established PR NFP Road foundations. Road roller compacted concretes and high performances cementitious granular material. Definition. Composition. Classification.

18 Page 18 Subsector : B26 Registration Date : AENOR Spain Project ID : P /0001 Project Established PNE Test methods for measurement of pavement deflection. Part 1: Benkelman beam This standard describes the procedure for obtaining surface deflection in a point under the action of a standard load, transmitted by the wheels of a single axle type with a load of kn (13 t), using the Benkelman beam, or similar devices Subsector : B26 Registration Date : AENOR Spain Project ID : P /0001 Project Established PNE Test methods for measurement of pavement deflection. Part 2: Lacroix deflectograph This standard describes the test procedure to determine the deflection of bituminous pavements using the Lacroix deflectograph Subsector : B26 Registration Date : AENOR Spain Project ID : P /0001 Project Established PNE Test methods for measurement of pavement deflection. Part 3: Falling weight deflectometer This standard describes the test procedure for determining the deflection and the radius of curvature of the deflection basin in a surface, induced by an impact force generated by the fall of a mass on a spring system and transmitted to the surface by means of a plate Subsector : B26 Registration Date : AENOR Spain Project ID : P /0001 Project Established PNE Test methods for measurement of pavement deflection. Part 4: Curviameter This standard describes the test procedure for determining the deflection and radius of

19 Page 19 curvature of the deflection basin in a surface at regular steps of 5 m, when of the rear twin wheels of a single axle of kn (13 t) is passing Subsector B27: WATERPROOFING MATERIALS Subsector : B27 Registration Date : AFNOR France Project ID : FA185575/0001 Project Established PRXP P /CN Self-supporting double skin metal faced insulating sandwich panels - Factory made products Subsector : B27 Registration Date : AENOR Spain Project ID : P /0001 Project Established PNE Synthetic materials. Application. Determination of peel resistance of joints between installed waterproofing synthetic sheets This standard defines a test method for the onsite determination of peel resistance of joints for installed waterproofing synthetic sheets Subsector B29: AGGREGATES Subsector : B29 Registration Date : UNI Italy Project ID : /0001 Project Established U Aggregates for concrete - Additional provisions for the application of EN Part 2: Requirements This standard has to be used in conjuction with UNI EN and it contains the additional italian provisions where they are required or permitted. REV/AMD UNI :2005

20 Subsector B30: FLOOR AND SURFACING Page 20 Subsector : B30 Registration Date : AFNOR France Project ID : FA185389/0001 Project Established PR NF P Sports grounds - Natural turf sport areas - Specifications for constructions Subsector : B30 Registration Date : AFNOR France Project ID : FA185390/0001 Project Established PR NF P Surfaces for sports areas - Synthetic material surface-coated athletics tracks and run-up areas - Construction requirements and inspections Subsector : B30 Registration Date : AFNOR France Project ID : FA185391/0001 Project Established PR NF P Sports grounds - Tennis courts - Construction conditions Subsector : B30 Registration Date : AFNOR France Project ID : FA185392/0001 Project Established PR NF P Sports grounds - Unbound mineral surfaces for outdoor sport areas - Specifications for construction Subsector B31: HEATING SYSTEMS IN BUILDINGS Subsector : B31 Registration Date :

21 ASI Austria Project ID : /0001 Project Established ÖNORM H Heating systems in buildings - Method for calculation of the design heat load for buildings with an average U value of at least 0,5 W/(m2. K) - National amendment to ÖNORM EN The present Austrian Standard defines methods for the calculation of the design heat leak and the design heat load for buildings with an average U value of at least 0,5 W/(m2. K) within design conditions. Page 21 Subsector : B31 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM H Heating systems in buildings - Method for calculation of the design heat load for buildings with an average U value below 0,5 W/(m2. K) The present Austrian Standard defines methods and required national input data and parameter for the calculation of the design heat load for buildings with an average U value of below 0,5 W/(m2. K). Subsector : B31 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM H Heating and cooling incorporated in building elements - Part 1: Planning and installation for floor, ceiling and wall heating and cooling - National amendment to ÖNORM EN 1264 (all parts) and ÖNORM EN (all parts) This Austrian Standard defines the conditions for planning and installation of surface heating and cooling systems, the heating and cooling elements of which are not embedded in the central concrete core of a building. This Austrian Standard shall be applied with ÖNORM EN 1264 (all parts) and ÖNORM EN (all parts). Subsector : B31 Registration Date : ASI Austria Project ID : /0001 Project Established , ÖNORM H

22 Page 22 Heating and cooling incorporated in building elements - Part 2: Planning and installation for building element activation - National amendment to ÖNORM EN 1264 (all parts) and ÖNORM EN (all parts) This Austrian Standard defines the conditions for planning and installation of surface heating and cooling systems, the heating and cooling elements of which are embedded in the central concrete core of a building. These include ceilings, exterior walls, interior walls and floors. This Austrian Standard shall be applied with ÖNORM EN 1264 and ÖNORM EN Subsector : B31 Registration Date : ASI Austria Project ID : /0001 Project Established , ÖNORM H Heating and cooling incorporated in building elements - Part 3: Planning and installation of heating of building elements for draining and dry keeping - National amendment to ÖNORM EN 1264 (all parts) and ÖNORM EN (all parts) This Austrian Standard defines the conditions for planning and installation of surface heating and cooling systems, to dehumidificate and dewater elements in buildings. These include ceilings, exterior walls, interior walls and floors. This Austrian Standard shall be applied with ÖNORM EN 1264 and ÖNORM EN Subsector B99: UNDETERMINED Subsector : B99 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM A 7002 Facility Management - Competencies of the profession of Facility Management This ÖNORM provides a profil of te competencies for the profession of Facility Management and defines the requiered fields of knowledge and experience. Subsector : B99 Registration Date : ASI Austria Project ID : /0001 Project Established , ONR Greening with wild plant seeds - Examples for living space types and seed mixtures This ONR applies together with ÖNORM L 1113 for the greening of land with wild plants

23 Page 23 seeds, which are not used for sole plant-, fodder- or food-production. Subsector : B99 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM B Project management in construction and operation - Part 5: Recommendations for comparisons of key figures This ÖNORM provides a practical guide for the first figures comparison of objects. This guide provides an overview of the pre-tuning without much effort with third parties, and allows a first comparison with other properties and organizations. Subsector : B99 Registration Date : ASI Austria Project ID : /0001 Project Established , ÖNORM B Real estate evaluation - Part 3: residual method The residual value method is used to determine the market value of undeveloped properties, development projects and developed property in which a fundamental revitalization is planned. The residual value method is particularly suitable for: the valuation of undeveloped properties, if no suitable reference prices are available in sufficient numbers and therefore the application of the comparative value method (according to 4 LBG) resigns; the assessment of fair value of an imminent, concretized project development or an under construction project; the valuation of developed properties that have reached the end of their economic usefulness and for which therefore a revitalization / redevelopment is planned and to check the highest and best use of developed properties. Subsector : B99 Registration Date : NEN Netherlands Project ID : /0001 Project Established NPR 4768:2013 Concept nl Condition assessment - Definition and pictures of decomposition and failing parts are present. Furthermore the intensities of the failures are visualised and can be used as a reference. This standard gives requirements for measurements, arrangement and use of materials for meter cupboards and their structural provisions for installation of pipes and cables into dwellings. This standard is not applicable for caravans.

24 Page 24 ** End of Sector **

25 Information procedure Page 25 Monthly Notifications Register Notifications registered at CCMC from to Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS Register issued on :

26 Subsector C01: Food products Page 26 Subsector : C01 Registration Date : MSZT Draft Issue Date : Hungary Latest Date for Comments : Project ID : /0001 Project Established Soda-water REV/AMD MSZ 8808:1995 Subsector : C01 Registration Date : AFNOR France Project ID : FA185551/0001 Project Established PR XP V Durum wheat (T. durum Desf.) - Determination of percentage of mitadine grains - Routine method with the Pohl grain cutter Subsector : C01 Registration Date : AFNOR France Project ID : FA185552/0001 Project Established PR XP V Durum wheat (T. durum Desf.) - Determination of the percentage of mitadine grains Rapid method with scalpel Subsector : C01 Registration Date : AFNOR France Project ID : FA185554/0001 Project Established PR XP V Sensory analysis - Performance measurement for panel(s) conducting conventional sensory profiles

27 Page 27 Subsector : C01 Registration Date : AENOR Spain Latest Date for Comments : Project ID : P /0002 Draft for public enquiry PNE :2013/1M Guide for trazability of fishery and aquaculture products. This project provides guidance to comply with correct identification requirements of fishery products aiming at complying with legal requirements on traceability through the whole chain, from fishing to commercialization. REV/AMD UNE :2009, UNE :2013 Subsector : C01 Registration Date : Project ID : t /0001 Project Established Peach Nectar This standard comprise peach nectar. Subsector : C01 Registration Date : Project ID : t /0001 Project Established Apricot Nectar This standard comprise apricot nectar. Subsector : C01 Registration Date : Project ID : t /0001 Project Established Turkish Delight This standard covers turkish delight Subsector : C01 Registration Date :

28 Page 28 Project ID : t /0001 Project Established Safflower Flowers This standard covers safflower flowes doesn't cover safflower seeds and proseed safflower seeds, and prossed safflower flowers. Subsector : C01 Registration Date : Project ID : t /0001 Project Established Lemon sauce This standard specifies lemon sauce.it does not specify lemon juice and lemon concentrate. Subsector : C01 Registration Date : Project ID : t /0001 Project Established Honey This standard specifies honey Subsector : C01 Registration Date : Project ID : t /0001 Project Established Turnip Juice This standard specifies turnip juice. Subsector : C01 Registration Date :

29 Page 29 Project ID : t /0001 Project Established Edible Sunflowerseed Oil This standard covers edible sunflowerseed oil. Subsector : C01 Registration Date : Project ID : t /0001 Project Established Mixed Pickle This standard applies to mixed pickle. Subsector : C01 Registration Date : Project ID : t /0001 Project Established Chocolate This standard specifies chocolate. Subsector : C01 Registration Date : Project ID : t /0001 Project Established , , Traditional sour pomegranate concentrate. This standard specifies to traditional pomegranate concentrate. Subsector : C01 Registration Date : Project ID : t /0001 Project Established

30 Lentils (Whole and Decorticated) This standard, applies to whole unshelled and decorticated dry lentils. It does not apply to lentil seeds kept for sowing. Page 30 Subsector : C01 Registration Date : Project ID : t /0001 Project Established , Butter This standard applies to butter which is defined in clause 0.2. Subsector : C01 Registration Date : Project ID : tst12536/0003 Project Established Cornelian cherry nectar This standard is specifiy to cornellian sherry nectar. Subsector : C01 Registration Date : Project ID : tst94543/0001 Project Established Betel nut Juice. This standard covers betel nut Juice Subsector C02: PAINTS AND RELATED PRODUCTS Subsector : C02 Registration Date : NEN Netherlands

31 Page 31 Project ID : /0001 Project Established , NEN 5254:2013 Concept nl Industrial application of organic coatings on hot-dip zinc coated or sherardized products (duplex-system) NEN 5254 stipulates the quality requirements for the application of paint systems, powder coatings and plastic coatings on hot dip galvanized products in a controlled industrial process. If a good end result is to be achieved, the following aspects must be controllable: - construction and composition of materials; - zinc layer and zinc surface; - pretreatment of the zinc surface; - organic coating system; - application of organic coating system; - control of coating system. The standard is applicable to discontinuous hot dip galvanized products, galvanized in accordance with EN-ISO 1461 and EN 10240, as well as products fabricated from continuously galvanized sheet galvanized in accordance with ISO 4998, which after galvanization and/or assembly are given an organic coating. Subsector C03: CHEMISTRY Subsector : C03 Registration Date : AENOR Spain Project ID : P /0001 Project Established PNE Cosmetic raw materials. Sunscreens. Purity and assay by gas chromatography. This standard determines the method for the determination of purity and assay of sunscreens by gas chromatography. REV/AMD UNE 84125:2000, UNE 84645:2002 Subsector : C03 Registration Date : AENOR Spain Project ID : P /0001 Project Established PNE Cosmetic raw materials. Sunscreens.1-(4-tert-butylphenyl)-3-(4-methoxyphenyl)- propane-1,3-dione. This standard includes specifications required by the 1-(4-tert-butylphenyl)-3-(pmethoxyphenyl)-propane-1,3-dione, in cosmetic uses. REV/AMD UNE 84128:2007 Subsector : C03 Registration Date : AENOR Spain Project ID : P /0001 Project Established

32 PNE Cosmetic raw materials. Sunscreens. 2-Phenylbenzimidazole-5-sulfonic acid. This standard includes specifications required by the 2-Phenylbenzimidazole-5-sulfonic acid, in cosmetic uses. REV/AMD UNE 84646:2007 Page 32 Subsector : C03 Registration Date : AENOR Spain Project ID : P /0001 Project Established PNE Cosmetic raw materials. Benzophenones. Determination of the purity by liquid chromatography. This standard specifies the method for the determination of purity and assay of benzophenones by liquid chromatography. REV/AMD UNE 84109:2001 Subsector C06: ESSENTIAL OILS Subsector : C06 Registration Date : AENOR Spain Project ID : P /0001 Project Established PNE Essential oils. Essential oil of Spanish wild marjoram (Thymus mastichina L.) This standard specifies certain characteristics of the Essential oil of Spanish wild marjoram (Thymus mastichina L.) REV/AMD UNE 84308:2008 Subsector : C06 Registration Date : AENOR Spain Project ID : P /0001 Project Established PNE Essential oils. Essential oil of neroli (Citrus aurantium L. ssp. aurantium syn. Citrus aurantium L. ssp. amara var. pumilia) from Spain. his standard specifies certain characteristics of the Oil of neroli. (Citrus aurantium L. ssp. aurantium syn. Citrus aurantium L. ssp. amara var. pumilia) of Spain. in order to facilitate assessment of its quality. REV/AMD UNE 84305:2007

33 Subsector C13: FERTILIZERS Page 33 Subsector : C13 Registration Date : ASI Austria Project ID : /0001 Project Established , ÖNORM S 2210 Compost-soils This ÖNORM refers to the development, manufacture, identification/description and application of compost-soils that are suitable for use as topsoil or vegetation layer to be installed in lawns, vegetable gardens, shrub- and tree plantings and flower beds. It sets out the requirements which must be met by compost-soil. The aim is to achieve an optimal growth of plants. In such an application, the permissible use of compost-soil as waste takes place according to AWG. Subsector C20: EXPLOSIVES AND FIREWORKS Subsector : C20 Registration Date : Project ID : tst11019/0001 Project Established Ammunition-Procedure for the statistical comparison of external ballistic performance of shell (Stanag 4106) This standard covers the ammunition procedure for the statistical comparison of external ballistic performance of shell International : Modified STANAG 4106 ED 3:1995 Subsector : C20 Registration Date : Project ID : tst11738/0001 Project Established Definition of pressure terms and their inter-relationship for use in the desing and proof of cannons and ammunition (Stanag 4110) This standard covers the definition of pressure terms and inter-relation ship for use in the design and tests of cannons and ammunition. International : Modified STANAG 4110 ED.4:2005 ** End of Sector **

34 Information procedure Page 34 Monthly Notifications Register Notifications registered at CCMC from to Sector F : FUNDAMENTAL STANDARDS Register issued on :

35 Subsector F06: TERMINOLOGY PRINCIPLES Page 35 Subsector : F06 Registration Date : Project ID : tst05894/0001 Project Established Glossary of Abbreviations Used in Nato Documents This standard covers the glassary of abbreviations used in NATO documents. International : Modified AAP-15 ED.D:1990 Subsector F12: INFORMATION PROCESSING SYSTEMS Subsector : F12 Registration Date : ASI Austria Project ID : /0001 Project Established , ÖNORM K 2204 General data format for biomedical signals Biomedical Signals (e.g. EEG, ECG, etc.) are, in addition to laboratory results and imaging data, another important group of patient-related diagnostic measurements. For storage of biosignals, however, no commonly accepted standard is available. Its the aim of this work to specify a format which optimally combines the features of existing standards and open specifications (including SCP-ECG, MFER, EDF, HL7aECG/FDA-XML, , Dicom- Waveform and other open vendor-specific formats) in a general data format. Subsector F14: GRAPHICAL TECHNOLOGY, SIGN-BOARDS AND NAMEPLATES Subsector : F14 Registration Date : AENOR Spain Project ID : P /0001 Project Established PNE Guidelines for colour management systems workflow and profile application. Part 2: Digital printing, digital cameras and LCD/TFT monitors. This standard specifies a set of recommendations to improve the performance of colour management system profiles in reproduction process (including displaying and printing) during characterization, building of profiles and use. REV/AMD UNE :2008

36 Subsector F15: MATERIAL TESTING IN GENERAL Page 36 Subsector : F15 Registration Date : Project ID : tst04518/0001 Project Established , Test Methods for Electrical and Electronic Component Parts for Military Purpose- Test Method for DC Resistance This standard covers the test methods for DC resistance of electrical and electronic component parts for military purpose. International : Modified MIL-STD-202 G (2):2013 Subsector F17: ADMINISTRATIVE DOCUMENTS Subsector : F17 Registration Date : Project ID : t /0001 Project Established , Occupational health and safety management systems - Requirements This Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for an occupational health and safety (OH&S) management system, to enable an organization to control its OH&S risks and improve its OH&S performance. It does not state specific OH&S performance criteria, nor does it give detailed specifications for the design of a management system. Subsector : F17 Registration Date : Project ID : tst90228/0002 Project Established Social Responsibility Management System-Requırements This Standard establishes requirements for defining, implementing, maintaining and improving a social responsibility management system so as to intagrate social responsibility within all the organization and to contribute to sustainable devolopment. International : Identical to IQNet SR 10 Subsector F19: OPTICS Subsector : F19 Registration Date :

37 Page 37 DIN Germany Project ID : /0001 Project Established Production in optical engineering - Workpiece receptions for optics - Part 2: Chucks with membranes Subsector : F19 Registration Date : DIN Germany Project ID : /0001 Project Established Production in optical engineering; diamond impregnated pellets Subsector F20: QUALITY ASSURANCE Subsector : F20 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM A 2616 Universal usability of information and transaction machines (ITM) - Basics This standard specifies the fundamental design principles of barrier-free design information and transaction machines (ITM) and their accessibility. Subsector : F20 Registration Date : ASI Austria Project ID : /0001 Project Established ONR Guide for implementation of ÖNORM EN in rehabilitation and cure institutes This ONR is a guidance for the implementation of ÖNORM EN in rehabilitation and cure institutes. An essential element of the ONR is the interpretation of implementation options for the 11 quality criteria according to ÖNORM EN

38 Page 38 Subsector : F20 (Secondary Subsector) Registration Date : Project ID : t /0001 Project Established , Occupational health and safety management systems - Requirements This Occupational Health and Safety Assessment Series (OHSAS) Standard specifies requirements for an occupational health and safety (OH&S) management system, to enable an organization to control its OH&S risks and improve its OH&S performance. It does not state specific OH&S performance criteria, nor does it give detailed specifications for the design of a management system. Subsector : F20 (Secondary Subsector) Registration Date : Project ID : tst90228/0002 Project Established Social Responsibility Management System-Requırements This Standard establishes requirements for defining, implementing, maintaining and improving a social responsibility management system so as to intagrate social responsibility within all the organization and to contribute to sustainable devolopment. International : Identical to IQNet SR 10 Subsector F23: ENERGY Subsector : F23 Registration Date : ASI Austria Project ID : /0001 Project Established , ÖNORM M 7109 Concepts of energy management - Efficient use of energy The terms and definitions included in this Austrian Standard are intended to increase the awareness of users of the different possibilities to use energy efficiently and economically for all applications as well as to create a unified terminology in this subject field. Subsector F99: UNDETERMINED

39 Subsector : F99 Registration Date : DIN Germany Project ID : /0001 Project Established Graphical symbols - Safety colours and safety signs - Part 4: Code of practice for the use of safety signs Page 39 ** End of Sector **

40 Information procedure Page 40 Monthly Notifications Register Notifications registered at CCMC from to Sector H : PRODUCTS FOR HOUSEHOLD AND LEISURE USE Register issued on :

41 Subsector H03: CONSUMER QUESTIONS Page 41 Subsector : H03 Registration Date : AENOR Spain Project ID : P /0001 Project Established PNE Service quality for small retail trade. Part 6: Requirements for service stations. This UNE standard states requirements for small retail which enable to provide a quality service in service stations. Subsector H04: SPORTS EQUIPMENT Subsector : H04 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM M Requirements for public and commercial sauna installations, infrared cabins, steam and other warm chambers - Part 1: Design and operation of saunas and saunas in combination with infrared thermal source This OENORM is applicable for all sauna baths and sauna baths in combination with infrared heat sources as well as applicable on the needed associated secondary installations and provides guidance for planning and operating for such sauna facilities. Subsector : H04 Registration Date : ASI Austria Project ID : /0001 Project Established ÖNORM M Requirements for public and commercial sauna installations, infrared cabins, steam and other warm chambers - Part 2: Design and operation of infrared cabins This ÖNORM provides guidance for planning and operating and is applicable for all infrared cabins with wood surfaces or surfaces made of wood layer materials and is as well applicable on the needed associated secondary installation. Subsector H09: FURNITURE Subsector : H09 Registration Date :

42 Page 42 ASI Austria Project ID : /0001 Project Established , ÖNORM A 1650 Chairs and tables for general school education - Aditional requirements to ÖNORM EN and ÖNORM EN This ÖNORM applies for chairs and tables for general education in schools (eg, elementary school, AHS, secondary school, HTL). It also applies to chairs and tables, which can be used with laptop computers or similar portable devices, but not for special jobs such as in laboratories, computer work spaces. Subsector H33: FOOTWEAR (EXCLUDING PROTECTIVE FOOTWEAR) Subsector : H33 Registration Date : AFNOR France Project ID : FA185362/0001 Project Established PR NF S Computer vision systems for drowning detection in swimming pools - Safety requirements and test methods Subsector H99: UNDETERMINED Subsector : H99 Registration Date : DIN Germany Project ID : /0001 Project Established Methods for measuring of the energy use from equipment for commercial kitchens - Part 15: Double jacketed boiling and quick boiling pans Subsector : H99 Registration Date : DIN Germany Project ID : /0001 Project Established Equipment for commercial kitchens - Multiple deck ovens - Requirements and testing

43 Page 43 Subsector : H99 Registration Date : DIN Germany Project ID : /0001 Project Established Methods for measuring of the energy use from equipment for commercial kitchens - Part 2: Commercial coffee machines Subsector : H99 Registration Date : DIN Germany Project ID : /0001 Project Established Methods for measuring of the energy use from equipment for commercial kitchens - Part 5: Tilting frying pans and stationary frying pans Subsector : H99 Registration Date : DIN Germany Project ID : /0001 Project Established Methods for measuring of the energy use from equipment for commercial kitchens - Part 6: Tilting pressure braising pans and stationary pressure braising pans Subsector : H99 Registration Date : DIN Germany Project ID : /0001 Project Established Methods for measuring of the energy use from equipment for commercial kitchens - Part 16: Kitchen Machinery ** End of Sector **