Maya. tediselmedical. technical data. Maya. quality. Pediatric bed head unit

Transcription

1 technical data is the wall-mounted bed head unit designed by Tedisel for Pediatric hospitalization. Perfil principal horizontal Installation Max. Length of manufacture 1500mm Electrical System Rated voltage Transportation and storage* 110/230 Vac / Vca Rated frequency tediselmedical Rated current 50/60Hz 10A o16a per circuit. 20A and 25A optional Lighting System (optional) Ballast Ballast: conventional or dimmable Direct light 1X10 W T8 LED - 1X18 W T8-1x39-1x24 W T5 Indirect light For surfaces with good mechanical strength (concrete, brickwork, etc.) it is recommended to fix the product directly on the surface with expansion plugs and screws. Weak surfaces should first be reinforced with a wooden insert fixed to the metal structure of the plasterboard in order to increase the consistency when fitting the screw. -10 C to + 60 C 20% - 80% * The following storage conditions are applicable for a maximum of 15 weeks. Ambient conditions Clasification Directive 93/42/EEC +10 ºC - +40ºC CLASS II B Max. 75% 1X20 W T8 LED - 1X36W T8-1X54 W T5 Night light 5w Tedisel complies with the provisions of Directive 93/42 / EEC (medical devices), ISO (medical supply units) and ISO (related to medical gases supply). Gas system Compressed gases 5 bar Compressed air-nitrogen supply to air motors Gas type 10 bar O2 - A4 - N2O - CO2 - VAC - AGSS - A8 Materials 6060 / 6063 T5 Structure Aluminium (3 mm) with epoxy painting Front plate High-pressure laminated finishes (HPL) End cover set EC Conformity Compatibility with other medical devices Tedisel products may be equipped with medical devices from other manufacturers. Please follow the instructions provided by the manufacturers of this equipment for proper installation. CE 0197 TüV Rheinland LGA Products GmbH Aluminium Plastic diffuser Extruded polycarbonate Vinyl length 1500 mm or 1700 mm Designed especially for pediatric spaces, is the option with a lively design and colorful integration of all the components necessary for child patient care. Tedisel Management System and all our products are certified with quality seal ISO 9001, ISO and CE marking granted by notified body TÜV RHEINLAND. Tedisel, as medical device manufacturer, has the medical device manufacturer license P.S number 6205, granted by the Spanish Agency for Medicines and Health Products Some references: Clínica Iberoamericana, Barranquilla Colombia Al Ain E. R. Hospital, U.A.E. Hospital Santa María, Lleida Spain Hospital Sant Joan de Déu, Barcelona Spain All medical devices developed and manufactured in Tedisel, are regulated by the European Directive 93/42 / EEC. All equipment has accreditation and certification of electrical safety and electromagnetic compatibility standards ISO and EN Pediatric bed head unit Management System EN ISO 13485:2012 ISO 9001: ID Sant Lluc, Badalona, BARCELONA, Spain Tel Fax info@tedisel.com globus.es quality

2 Our pediatric bed head unit in detail Design without angles Easy wall mounting Organic design without right angles. Integrated provision on illustration. Assembly on resistant surfaces: The product can be directly installed with expansion plugs and lag screws. For weak surfaces, it is recommended to reinforce the surface with wooden structure. Front cover The features of the front cover include: High-pressure laminated finishes (HPL) Clean appearance since it conceals the electrical and telecommunication components. It permits easy access to the interior for easy maintenance. Personalization of the bed head unit which includes drawing with decorative children designs. Designed for children Optional rear cover It gives a more welcoming and pleasant appearance in pediatric area. Possibility to add backplate (the same material as the front) to give continuity to the illustration. Versatile Possibility to adapt the design to the theme of the room. Electrical and telecommunication components 3 Options lighting The surface-mounted mechanisms are fixed in the interior face of the concealed profile behind the HPL front cover mm Tedisel Designs 1 Night light LED with decorative designs projecting to the ceiling. tulipania Ma corallina Reading light. 1 Polycarbonate diffuser. 2 2 Indirect light. 280 mm Ambient light. 3 Indirect light. 3 Gas outlet. Medical gases. 4 Electrical outlets location and direct light. Electrical outlets, voice and data and indirect light. 5 HPL front cover. 4 akunamatata main profile is divided in three compartments: spaceshuttle Maintenance Easy access to the equipment interior which is carried out by folding the HPL front cover permits comfortable handling of the electrical and gas installations.

3 technical data is the wall-mounted bed head unit designed by Tedisel for Pediatric hospitalization. Perfil principal horizontal Installation Max. Length of manufacture 1500mm Electrical System Rated voltage Transportation and storage* 110/230 Vac / Vca Rated frequency tediselmedical Rated current 50/60Hz 10A o16a per circuit. 20A and 25A optional Lighting System (optional) Ballast Ballast: conventional or dimmable Direct light 1X10 W T8 LED - 1X18 W T8-1x39-1x24 W T5 Indirect light For surfaces with good mechanical strength (concrete, brickwork, etc.) it is recommended to fix the product directly on the surface with expansion plugs and screws. Weak surfaces should first be reinforced with a wooden insert fixed to the metal structure of the plasterboard in order to increase the consistency when fitting the screw. -10 C to + 60 C 20% - 80% * The following storage conditions are applicable for a maximum of 15 weeks. Ambient conditions Clasification Directive 93/42/EEC +10 ºC - +40ºC CLASS II B Max. 75% 1X20 W T8 LED - 1X36W T8-1X54 W T5 Night light 5w Tedisel complies with the provisions of Directive 93/42 / EEC (medical devices), ISO (medical supply units) and ISO (related to medical gases supply). Gas system Compressed gases 5 bar Compressed air-nitrogen supply to air motors Gas type 10 bar O2 - A4 - N2O - CO2 - VAC - AGSS - A8 Materials 6060 / 6063 T5 Structure Aluminium (3 mm) with epoxy painting Front plate High-pressure laminated finishes (HPL) End cover set EC Conformity Compatibility with other medical devices Tedisel products may be equipped with medical devices from other manufacturers. Please follow the instructions provided by the manufacturers of this equipment for proper installation. CE 0197 TüV Rheinland LGA Products GmbH Aluminium Plastic diffuser Extruded polycarbonate Vinyl length 1500 mm or 1700 mm Designed especially for pediatric spaces, is the option with a lively design and colorful integration of all the components necessary for child patient care. Tedisel Management System and all our products are certified with quality seal ISO 9001, ISO and CE marking granted by notified body TÜV RHEINLAND. Tedisel, as medical device manufacturer, has the medical device manufacturer license P.S number 6205, granted by the Spanish Agency for Medicines and Health Products Some references: Clínica Iberoamericana, Barranquilla Colombia Al Ain E. R. Hospital, U.A.E. Hospital Santa María, Lleida Spain Hospital Sant Joan de Déu, Barcelona Spain All medical devices developed and manufactured in Tedisel, are regulated by the European Directive 93/42 / EEC. All equipment has accreditation and certification of electrical safety and electromagnetic compatibility standards ISO and EN Pediatric bed head unit Management System EN ISO 13485:2012 ISO 9001: ID Sant Lluc, Badalona, BARCELONA, Spain Tel Fax info@tedisel.com globus.es quality

4 Our pediatric bed head unit in detail Design without angles Easy wall mounting Organic design without right angles. Integrated provision on illustration. Assembly on resistant surfaces: The product can be directly installed with expansion plugs and lag screws. For weak surfaces, it is recommended to reinforce the surface with wooden structure. Front cover The features of the front cover include: High-pressure laminated finishes (HPL) Clean appearance since it conceals the electrical and telecommunication components. It permits easy access to the interior for easy maintenance. Personalization of the bed head unit which includes drawing with decorative children designs. Designed for children Optional rear cover It gives a more welcoming and pleasant appearance in pediatric area. Possibility to add backplate (the same material as the front) to give continuity to the illustration. Versatile Possibility to adapt the design to the theme of the room. Electrical and telecommunication components 3 Options lighting The surface-mounted mechanisms are fixed in the interior face of the concealed profile behind the HPL front cover mm Tedisel Designs 1 Night light LED with decorative designs projecting to the ceiling. tulipania Ma corallina Reading light. 1 Polycarbonate diffuser. 2 2 Indirect light. 280 mm Ambient light. 3 Indirect light. 3 Gas outlet. Medical gases. 4 Electrical outlets location and direct light. Electrical outlets, voice and data and indirect light. 5 HPL front cover. 4 akunamatata main profile is divided in three compartments: spaceshuttle Maintenance Easy access to the equipment interior which is carried out by folding the HPL front cover permits comfortable handling of the electrical and gas installations.

5 Our pediatric bed head unit in detail Design without angles Easy wall mounting Organic design without right angles. Integrated provision on illustration. Assembly on resistant surfaces: The product can be directly installed with expansion plugs and lag screws. For weak surfaces, it is recommended to reinforce the surface with wooden structure. Front cover The features of the front cover include: High-pressure laminated finishes (HPL) Clean appearance since it conceals the electrical and telecommunication components. It permits easy access to the interior for easy maintenance. Personalization of the bed head unit which includes drawing with decorative children designs. Designed for children Optional rear cover It gives a more welcoming and pleasant appearance in pediatric area. Possibility to add backplate (the same material as the front) to give continuity to the illustration. Versatile Possibility to adapt the design to the theme of the room. Electrical and telecommunication components 3 Options lighting The surface-mounted mechanisms are fixed in the interior face of the concealed profile behind the HPL front cover mm Tedisel Designs 1 Night light LED with decorative designs projecting to the ceiling. tulipania Ma corallina Reading light. 1 Polycarbonate diffuser. 2 2 Indirect light. 280 mm Ambient light. 3 Indirect light. 3 Gas outlet. Medical gases. 4 Electrical outlets location and direct light. Electrical outlets, voice and data and indirect light. 5 HPL front cover. 4 akunamatata main profile is divided in three compartments: spaceshuttle Maintenance Easy access to the equipment interior which is carried out by folding the HPL front cover permits comfortable handling of the electrical and gas installations.

6 technical data is the wall-mounted bed head unit designed by Tedisel for Pediatric hospitalization. Perfil principal horizontal Installation Max. Length of manufacture 1500mm Electrical System Rated voltage Transportation and storage* 110/230 Vac / Vca Rated frequency tediselmedical Rated current 50/60Hz 10A o16a per circuit. 20A and 25A optional Lighting System (optional) Ballast Ballast: conventional or dimmable Direct light 1X10 W T8 LED - 1X18 W T8-1x39-1x24 W T5 Indirect light For surfaces with good mechanical strength (concrete, brickwork, etc.) it is recommended to fix the product directly on the surface with expansion plugs and screws. Weak surfaces should first be reinforced with a wooden insert fixed to the metal structure of the plasterboard in order to increase the consistency when fitting the screw. -10 C to + 60 C 20% - 80% * The following storage conditions are applicable for a maximum of 15 weeks. Ambient conditions Clasification Directive 93/42/EEC +10 ºC - +40ºC CLASS II B Max. 75% 1X20 W T8 LED - 1X36W T8-1X54 W T5 Night light 5w Tedisel complies with the provisions of Directive 93/42 / EEC (medical devices), ISO (medical supply units) and ISO (related to medical gases supply). Gas system Compressed gases 5 bar Compressed air-nitrogen supply to air motors Gas type 10 bar O2 - A4 - N2O - CO2 - VAC - AGSS - A8 Materials 6060 / 6063 T5 Structure Aluminium (3 mm) with epoxy painting Front plate High-pressure laminated finishes (HPL) End cover set EC Conformity Compatibility with other medical devices Tedisel products may be equipped with medical devices from other manufacturers. Please follow the instructions provided by the manufacturers of this equipment for proper installation. CE 0197 TüV Rheinland LGA Products GmbH Aluminium Plastic diffuser Extruded polycarbonate Vinyl length 1500 mm or 1700 mm Designed especially for pediatric spaces, is the option with a lively design and colorful integration of all the components necessary for child patient care. Tedisel Management System and all our products are certified with quality seal ISO 9001, ISO and CE marking granted by notified body TÜV RHEINLAND. Tedisel, as medical device manufacturer, has the medical device manufacturer license P.S number 6205, granted by the Spanish Agency for Medicines and Health Products Some references: Clínica Iberoamericana, Barranquilla Colombia Al Ain E. R. Hospital, U.A.E. Hospital Santa María, Lleida Spain Hospital Sant Joan de Déu, Barcelona Spain All medical devices developed and manufactured in Tedisel, are regulated by the European Directive 93/42 / EEC. All equipment has accreditation and certification of electrical safety and electromagnetic compatibility standards ISO and EN Pediatric bed head unit Management System EN ISO 13485:2012 ISO 9001: ID Sant Lluc, Badalona, BARCELONA, Spain Tel Fax info@tedisel.com globus.es quality