Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Transcription

1 Schedule of ccreditation United Kingdom ccreditation Service ureau Veritas Consumer Products Services Shanghai Co Ltd ccredited to ureau Veritas Consumer Products Services (Shanghai) No 168 Guanghua Road Zhuanqiao Town Minhang Shanghai China Contact: Casar Shao Tel: Fax: Website: Laboratory locations: below s covered by the organisation and their relevant activities details ctivity code ddress No 368 Guangzhong Road Zhuanqiao Town Minhang Shanghai China Local contact Ms C Shao Tel: Fax: Testing: Textiles/Leather - Chemical Textiles/Leather - Physical Furniture - Furnishing - Flammability Toys - Physical/Mechanical Toys - Flammability Toys - Electrical Safety Cookware - Physical Furniture - Strength & Stability Writing & Marking Instruments Sunglasses - Optical Lighters - Safety ddress No 168 Guanghua Road Zhuanqiao Town Minhang Shanghai China Local contact Ms C Shao Tel: Fax: Testing: Toys Chemical Softlines - Flammability ddress No 639 Guangzhong Road Zhuanqiao Town Minhang Shanghai China Local contact Ms C Shao Tel: Fax: Testing: Toys - Physical/Mechanical Childrens & Juvenile Products Physical/Mechanical/Safety C ssessment Manager: PL Page 1 of 15

2 Schedule of ccreditation United Kingdom ccreditation Service ccredited to ureau Veritas Consumer Products Services Shanghai Co Ltd DETIL OF CCREDITTION TOYS and TOY PCKGING Physical and Mechanical Tests S EN 71-1: 2014 EN 71-1: 2014 Excluding:: toy bicycles, Toys using headphones or earphones Voice toys S EN 71-1: :2014 (withdra\wn) EN 71-1: :2014 (withdrawn) Excluding: toy bicycle, Toys using headphones or earphones & Voice toys S EN 71-1: :2009 (withdrawn) EN 71-1: :2009 (withdrawn) STM F Standard Consumer Safety Specification for Toy Safety, 4.1 Material Quality 4.5 Sound-Producing Toys 4.6 Small Objects 4.7 ccessible Edges 4.8 Projections 4.9 ccessible Points 4.10 Wires or Rods 4.11 Nails and Fasteners 4.12 Plastic Film 4.13 Folding Mechanisms and Hinges 4.14 Cords and Elastics in toys 4.15 Stability and Overload Requirements 4.16 Confined Spaces 4.17 Wheels, Tires, and xles 4.18 Holes, Clearances, and ccessibility of Mechanisms 4.19 Simulated Protective Devices Pacifiers ssessment Manager: PL Page 2 of 15

3 Schedule of ccreditation United Kingdom ccreditation Service ccredited to ureau Veritas Consumer Products Services Shanghai Co Ltd TOYS and TOY Physical and Mechanical 4.21 Projectile Toys Tests PCKGING (cont d) (cont d) 4.22 Teethers and Teething Toys 4.23 Rattles 4.24 Squeeze Toys 4.25 attery-operated Toys (except for ) 4.26 Toys intended to be ttached to a Crib or Playpen 4.27 Stuffed and eanbag-type Toys 4.28 Stroller and Carriage Toys 4.29 rt Materials (except for ) 4.30 Toy Gun Marking 4.31 alloons 4.32 Certain Toys with Nearly Spherical Ends 4.33 Marbles 4.34 alls 4.35 Pompoms 4.36 Hemispheric-Shaped Objects 4.38 Magnets 4.39 Jaw Entrapment in Handles and Steering Wheels 4.40 Expanding material 4.41 Toy chests 5 Safety Labeling Requirements 6 Instructional Literature 7 Producer s Markings 8 Test Methods 8.1 General 8.5 Normal Use Testing 8.6 buse Testing 8.7 Impact Tests 8.8 Torque Tests for Removal of Components 8.9 Tension Test for Removal of Components 8.10 Compression Test 8.11 Tests for Tire Removal and Snap-in Wheel and xle ssembly Removal 8.12 Flexure Test 8.13 Test for Mouth-ctuated Toys 8.14 Projectiles 8.15 Test for Stability of Ride-On Toys ssessment Manager: PL Page 3 of 15

4 Schedule of ccreditation United Kingdom ccreditation Service ccredited to ureau Veritas Consumer Products Services Shanghai Co Ltd TOYS and TOY Physical and Mechanical 8.16 Pompoms Tests PCKGING (cont d) (cont d) 8.17 Stalled Motor Test for attery-operated Toys 8.19 Tests for Toys Which Produce Noise 8.20 Dynamic Strength Test for Wheeled Ride-on Toys 8.21 Packaging Film Thickness 8.22 Test for Loops and Cords 8.24 Magnet Test Methods 8.25 Test Methods for Locking Mechanisms or Other Means Standard Consumer Safety 8.26 Test for Overload of Ride-On Toys and Toy Seats 8.27 Tests for toy chest lids and closures 8.28 Test for overload of ride-on toys and toy seats 8.30 Expanding materials-test method Specification for Toy Safety, 4.27 (STM F963-07e1) Toy Chests 8.14 (STM F963-07e1) Tests for toy chest lids and closures ssessment Manager: PL Page 4 of 15

5 Schedule of ccreditation United Kingdom ccreditation Service ccredited to ureau Veritas Consumer Products Services Shanghai Co Ltd PCKGING (cont d) Flammability Tests S EN 71-2:2011+1:2014 EN 71-2:2011+1:2014 Excluding the following: Flammable gases Flammable gels Excluding the following: Flammable gases Extremely Flammable liquids Flammable liquids Flammable gels Standard Consumer Safety Specification for Toy Safety, STM F963:11 (withdrawn) & STM F- 963: Flammability US 16 CFR Method for determining extremely flammable and flammable solids ssessment Manager: PL Page 5 of 15

6 Schedule of ccreditation United Kingdom ccreditation Service ccredited to ureau Veritas Consumer Products Services Shanghai Co Ltd TOYS and TOY MTERILS Chemical Tests Migration of the elements antimony, arsenic, barium, cadmium, chromium, lead, mercury, selenium S EN 71-3: :2001 EN 71-3: :2000/C 2002 S : :2001 ll above standards withdrawn Using ICP OES Using ICP MS Category I, Category II, & Category III SOP CPSD-N MTHD To implement EN71-3: :2014, table 2, Using acid extraction, and ICP (MS) To implement EU Directive 2009/48/EC and md 2012/7 EU Category III SOP CPSD-N MTHD To implement EN71-3: :2014, table 2 Using acid extraction, and ICP (MS) SOP CPSD-N MTHD Using acid extraction. and IC-UVVis or SOP TP(SH)-0074a using LC-ICP(MS) by subtraction total Cr Cr VITo meet EU Directive 2009/48EC First ction Screening method If total extractable Cr, when Uexp is taken into account; is < 0.02mg/Kg for Cat I; is <0.005mg/Kg for Cat II; is < 0.2mg/Kg for Cat III; then it may be inferred that the sample meets the requirements of EN 71-3: :2014, table 2 for The appropriate Category for both Cr III & Cr VI ssessment Manager: PL Page 6 of 15

7 Schedule of ccreditation United Kingdom ccreditation Service ccredited to ureau Veritas Consumer Products Services Shanghai Co Ltd TOYS ND TOYS MTERILS (cont d) Chemical tests (cont d) Extractable Organic Tin Category I, Category II, & Category III SOP CPSD-N MTHD To meet limits of table 2 of EN 71-3: :2014 Total or presence of other Organic Tin compounds may mean limits of table 2 are exceeded If Organo Tin expressed as Tributyl Tin calculated from total extractable Sn, when Uexp is taken into account; Is < 0.9mg/Kg for Cat I; Is < 0.2mg/Kg for Cat II; Is < 12mg/Kg for Cat III; then it may be inferred that the sample meets the migration limits of EN 71-3: :2014 for the appropriate Category for both Inorganic and Organic Tin Migration of heavy elements STM section 8.3, to meet requirements of sections (2), , & (2)b; using hot plate or microwave digestion; shaking water bath; and using ICP(OES) & (MS), but excluding XRF ssessment Manager: PL Page 7 of 15

8 Schedule of ccreditation United Kingdom ccreditation Service ccredited to ureau Veritas Consumer Products Services Shanghai Co Ltd TOYS ND TOYS MTERILS (cont d) Chemical tests (cont d) Primary aromatic amines CPSD-N-00399; Tests only to EN & & EN71-11 section 5.4, using GC(MS) & HPLC(DD). To meet the requirements of EN 71-9: :2007 table 2C Primary aromatic amines in listed matrices in EN71-10 section Leather; Wood; Paper; queous Liquids; Materials leaving a trace; Modelling clays; alloon making compounds Imitation Tattoos, all to EN71-11 section 5.4, using GC(MS) & HPLC. Preservatives CPSD-N MTHD (preservatives: I, MIT and CIT), CPSD-N MTHD (Formaldehyde) and CPSD-N (Phenol) using HPLC(DD). To meet the requirements of EN71-9: :2007 table 2H Preservatives in listed matrices in EN 71-10:2005 Sections 8.2.3, 8.5.3, & Colourants CPSD-N MTHD (Colourants in toy materials). Using HPLC-DD-MS To meet the requirements of EN71-9: :2007 table 2 Colourants listed in matrices in EN 71-10:2005 Sections 8.1.3, 8.2.1, 8.3.1, 8.4.1, 8.5.1, 8.6.1, 8.7.1, and ssessment Manager: PL Page 8 of 15

9 Schedule of ccreditation United Kingdom ccreditation Service ccredited to ureau Veritas Consumer Products Services Shanghai Co Ltd TOYS ND TOYS MTERILS (cont d) Chemical tests (cont d) Surface Coatings, metals, or non-metals) Total Lead CPSC-CH-E :2012, E :2012, :2011to implement STM section , (1), & (2)a; using hot plate or microwave digestion; and using ICP(OES) or ICP(MS), but excluding XRF; in order to meet the requirements of CPSI:2008 section 101, and 16CFR 1303, using microwave digestion and ICP(OES or ICP(MS) TOYS & CHILDREN s METL PRODUCTS, including JEWELLERY Soluble Cadmium CPSC-CH-E to meet requirements of STM section (2)c, using ICP(OES) or ICP(MS) PLSTIC COTINGS Total Cadmium Content in Plastic, Coating, Wet Paint, Other Similar Surface Coating Materials and Jewellery CPSD-N MTHD based on EN 1122 Method to implement RECH regulation (EC) No 1907/2006/EC nnex XVII Item 23; and Directives 91/338/EEC & EU 835/2012, using S or ICP(OES) TOYS ge Warning Labelling Graphical symbols for age warning labelling S EN 71-6:1995 EN 71-6:1994 S :1995 WRITING & MRKING INSTRUMENTS Specification for Caps to reduce the risk of asphyxiation S :2008 Specification for End Closures to reduce the risk of asphyxiation S : :2014 ssessment Manager: PL Page 9 of 15

10 Schedule of ccreditation United Kingdom ccreditation Service ccredited to ureau Veritas Consumer Products Services Shanghai Co Ltd TOYS Electrical Safety Tests Electrical toys supplied at SELV not exceeding 24V and 3 EN 62115: :2015S EN 62115: :2015 Excluding the following Clauses nnex E OUTDOOR SETING and TLES for CMPING, DOMESTIC and CONTRCT USE General Safety Requirements S EN 581-1: EN 581-1: Mechanical safety requirements and test methods for seating EN 581-2: 2015S EN 581-2:2015 (Excluding nnex ) Mechanical Safety requirements and Test Methods for Tables S EN 581-3: EN 581-3: S EN 581:Part 3:1999 (withdrawn) DOMESTIC FURNITURE - SETING Determination of stability S EN 1022:2005 EN 1022:2005 Test method for the determination of strength and durability S EN 1728:2012 S EN 1728:2001 (withdrawn) EN1728:2000 (withdrawn) Mechanical and structural safety requirements EN 12520: S EN 12520: DOMESTIC FURNITURE - TLES Test method for the determination of strength, durability and stability S EN 1730 :2012 S EN 1730: MDs and (withdrawn) EN 1730:2000 (withdrawn) FURNITURE-STRENGTH, DURILITY and SFETY Requirements for domestic tables S EN 12521:2015 EN 12521:2015 CHIRS & STOOLS Upright chairs and stools ISO :1988 Chair with tilting or reclining mechanisms when fully reclined, and rocking chairs ISO :1992 CHILDRENS DOMESTIC FURNITURE CHILDRENS DOMESTIC SETING Physical/Mechanical/Safety FIR/FRQG C001: Physical/Mechanical/Safety FIR/FRQG C002:2016 ssessment Manager: PL Page 10 of 15

11 Schedule of ccreditation United Kingdom ccreditation Service ccredited to ureau Veritas Consumer Products Services Shanghai Co Ltd CHILDRENS DOMESTIC TLES & DESKS Physical/Mechanical/Safety FIR/FRQG C003: Furniture-Children s cots and folding cots for domestic use Part 1:Safety requirements Part 2 :Test methods S EN 716-1:2008+1:2013 EN 716-1:2008+1:2013 S EN 716-2:2008+1:2013 EN 716-2:2008+1:2013 C Furniture-Cribs and cradles for domestic use Part 1:Safety requirements Part 2:Test methods S EN :1997 EN :1996 S EN :1996 EN :1996 C Child care articles-carry cots and stands Safety requirements and test methods S EN 1466:2014+C2015 EN 1466:2014+C2015 C Child use and care articles- Safety barriers Safety requirements and test methods S EN 1930:2011 EN 1930:2011 C Children s high chairs Part1:Safety requirements Part2:Test methods EN 14988:2017 S EN 14988:2017 C Child care articles-wheeled child conveyances Safety requirements and test methods S EN 1888:2012 EN 1888:2012 C FURNITURE & FURNISHINGS Flammability F & F Fire Safety Regs 1988 Schedule 1 Part 1 F & F Fire Safety Regs 1988 Schedule 2 Part 1 F & F Fire Safety Regs 1988 Schedule 4 F & F Fire Safety Regs 1988 Schedule 5 ssessment Manager: PL Page 11 of 15

12 Schedule of ccreditation United Kingdom ccreditation Service ccredited to ureau Veritas Consumer Products Services Shanghai Co Ltd COOKWRE Domestic cookware for use on top of a stove, cooker or hob General Requirements S EN :2000+1:2004 EN :2000+1:2004 Mechanical dishwashing resistance of utensils - domestic articles S EN :2005 Resistance to microwave heating of ceramic, glass, glass-ceramic or plastic cookware S EN 15284:2007 Domestic water kettles for use on top of stove, cookers or hob S EN13750:2002 TEXTILES/POLYMERICS/ LETHER & OTHER MTERILS anned zo Dyes Including 4- S EN :2003 S EN :2003 S EN :2012 EN :2003 EN :2003 EN :2012 EN :2012 ISO :2015: ISO :2011 anned zo Dyes Including 4-64 LFG :2006 RECH regulation (EC) No 1907/2006 NNEX XVII Item 43 and md EU 126/2013 Using GC-MS and HPLC-DD Polyaromatic Hydrocarbons fps GS 2014:01 PK Phthalate Content EN ISO 14389:2014 Using GC-MS To meet RECH 1907/ md 552/2009 nnex XVII items 51 & 52 + md 552/2009 Colourfastness to Perspiiration ISO 105:E04:2013 ssessment Manager: PL Page 12 of 15

13 Schedule of ccreditation United Kingdom ccreditation Service ccredited to ureau Veritas Consumer Products Services Shanghai Co Ltd COTED METL ITEMS inc JEWELLERY Nickel Release S EN 1811: :2015 S EN 12472: :2009 S EN 16128:2011 +C 2012 (withdrawn) S EN 16128:2015 EN 1811: :2008 (withdrawn) EN 1811: C 2012 (withdrawn) EN 16128: C 2012 Using ICP (OES) EN 12472: :2009 to implement RECH regulations (EC) No 1907/2006 nnex XVII Item 27, SPECTCLE FRMES ND SUNGLSSES Nickel Release EN ISO (Sections & 8.8):2012 citing S EN 16128:2011 to implement EN1811:2011+1:2015 Using ICP (OES) ISO TS 24348:2007 (withdrawn) ISO TS :2014 G/T 19719:2005 G/T :2012 ssessment Manager: PL Page 13 of 15

14 Schedule of ccreditation United Kingdom ccreditation Service ccredited to ureau Veritas Consumer Products Services Shanghai Co Ltd PERSONL EYE EQUIPMENT Sunglasses and sunglare filters for general use S EN ISO : :2015 excluding clauses : 5.2 (Enhanced Infrared absorption) (Photochromic Filters) (Polarizing Filters) (ntireflective Coated Sunglasses) (Enhanced Infrared bsorbtion)6.2 Local variations in refractive power 7.3 Impact resistance of the filter,strength level Increased endurance of sunglasses 7.5 Resistance to perspiration 7.6 Impact resistance of the filter,strength level 2 or 3 10 Resistance to abrasion 11.2 Temporal protective requirements. Personal protective equipment --Test methods for sunglasses and related eyewear S EN ISO :2013 excluding clauses : 7.5 Calculation of solar IR transmittance 7.10 Polarizing filters 7.11 Photochromic filters 8.3 Test method for local variations in refractive power 9.2 Test method for impact resistance of filters,strength level Test method for impact resistance of sunglasses,strength level Test method for impact resistance of sunglasses,strength level Test method for impact resistance of sunglasses,strength level Test method for increased endurance of sunglasses 9.10 Test for resistance to perspiration of the sunglass Frame ssessment Manager: PL Page 14 of 15

15 Schedule of ccreditation United Kingdom ccreditation Service ccredited to ureau Veritas Consumer Products Services Shanghai Co Ltd LIGHTERS Safety S EN ISO 9994:2006+1:2008 EN ISO 9994:2006+1:2008 UTILITY LIGHTERS Safety S ISO 22702:2003+1:2008 END ssessment Manager: PL Page 15 of 15