European Ordering Rules - Ordering of characters from the Latin, Greek and Cyrillic scripts

Transcription

1 IRISH STANDARDS PUBLISHED BASED ON CEN/CENELEC STANDARDS I.S. ENV 13710:2000 European Ordering Rules - Ordering of characters from the Latin, Greek and Cyrillic scripts I.S. ENV 13801:2000 Plastics piping systems for soil and waste discharge (low and high temperature) within the building structure - Thermoplastics - Recommended practice for installation I.S. CEN TS 13853:2004 Date published 13 FEBRUARY 2010 Swap bodies for combined transport Stackable swap bodies type C 745-S16 Dimensions, design requirements and testing I.S. EN :2005 Date published 7 JANUARY 2010 Standard data element types with associated classification scheme for electric components -- Part 4: IEC reference collection of standard data element types and component classes (IEC :2005 (EQV)) I.S. EN 1990:2002/A1:2006 Date published 29 MARCH 2010 Eurocode - Basis of structural design I.S. EN :2006 Date published 31 MARCH 2010 Eurocode 1 - Actions on structures - Part 4: Silos and tanks I.S. EN :2006/AC:2006 Date published 12 JANUARY 2010 Connectors for electronic equipment - Tests and measurements -- Part 13-5: Mechanical operation tests - Test 13e: Polarizing and keying method (IEC :2006 (EQV)) I.S. EN :2005/A1:2007 Date published 7 JANUARY 2010 Rotating electrical machines -- Part 9: Noise limits (IEC :2003/A1:2007 (EQV)) I.S. EN 548:2004/AC:2007 Resilient floor coverings - Specification for plain and decorative linoleum I.S. EN 1457:1999/A1:2002/AC:2007 Chimneys - Clay/Ceramic Flue Liners - Requirements and test methods I.S. EN ISO :1995/AC:2007 Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO :1994/Cor 1:2006) I.S. EN ISO 15301:2001/AC:2007 Animal and vegetable fats and oils - Determination of sediment in crude fats and oils - Centrifuge method (ISO 15301:2001/Cor 1:2007) Date: 18/07/2018 Page 1

2 I.S. EN 13227:2002/AC:2007 Wood flooring - Solid lamparquet products I.S. EN 13228:2002/AC:2007 Wood flooring - Solid wood overlay flooring elements including blocks with an interlocking system I.S. EN 13629:2002/AC:2007 Wood flooring - Solid pre-assembled hardwood board I.S. EN 12960:2001/AC:2007 Adhesives for paper and board, packaging and disposable sanitary products - Determination of shear resistance I.S. EN 1895:2001/AC:2007 Adhesives for paper and board, packaging and disposable sanitary products 180 -"T" peel test for a flexible-to-flexible assembly I.S. EN 853:1996/AC:2007 Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification I.S. EN 14848:2005/AC:2007 Aerosol containers - Metal containers with 25,4 mm aperture - Dimensions of valve cups I.S. EN 14246:2006/AC:2007 Gypsum elements for suspended ceilings - Definitions, requirements and test methods I.S. EN ISO :2005/AC:2007 Petroleum and natural gas industries - Completion fluids and materials - Part 3: Testing of heavy brines (ISO :2005/Cor 1:2006) I.S. EN ISO 11960:2004/AC:2007 Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2004/Cor 1:2006) I.S. EN ISO :2003/AC:2007 Petroleum and natural gas industries - Cements and materials for well cementing - Part 2: Testing of well cements (ISO :2003/Cor 1:2006) I.S. EN ISO :2002/AC:2007 Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 4: Fabrication, installation and operation (ISO :2002/Cor 1:2006) I.S. EN 14915:2006/AC:2007 Solid wood panelling and cladding - Characteristics, evaluation of conformity and marking Date: 18/07/2018 Page 2

3 I.S. EN 47:2005/AC:2007 Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method) I.S. EN 725-5:2007/AC:2007 Advanced technical ceramics - Methods of test for ceramic powders - Part 5: Determination of particle size distribution I.S. EN 13240:2001/AC2:2004/AC:2007 Roomheaters fired by solid fuel - Requirements and test methods I.S. EN 12809:2001/A1:2004/AC:2007 Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kw - Requirements and test methods I.S. EN 13229:2001/A2:2004/AC:2007 Inset appliances including open fires fired by solid fuels - Requirements and test methods I.S. EN 12815:2001/A1:2004/AC:2007 Residential cookers fired by solid fuel - Requirements and test methods I.S. EN :2002/AC:2007 Date published 12 JANUARY 2010 Household and similar electrical appliances - Safety -- Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements (IEC :2002 (EQV)) I.S. EN :2003/AC:2007 Date published 12 JANUARY 2010 Household and similar electrical appliances - Safety -- Part 2-37: Particular requirements for commercial electric deep fat fryers (IEC :2002 (EQV)) I.S. EN :2003/AC:2007 Date published 12 JANUARY 2010 Household and similar electrical appliances - Safety -- Part 2-38: Particular requirements for commercial electric griddles and griddle grills (IEC :2002 (EQV)) I.S. EN :2005/AC:2007 Date published 12 JANUARY 2010 Household and similar electrical appliances - Safety -- Part 2-58: Particular requirements for commercial electric dishwashing machines (IEC :2002 (MOD)) I.S. EN :2003/AC:2007 Date published 12 JANUARY 2010 Household and similar electrical appliances - Safety -- Part 2-62: Particular requirements for commercial electric rinsing sinks (IEC :2002 (EQV)) I.S. EN :2003/AC:2007 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges Date: 18/07/2018 Page 3

4 I.S. EN ISO 13694:2000/AC:2007 Optics and optical instruments Lasers and laser-related equipment Test methods for laser beam power (energy) density distribution I.S. EN :2007/AC:2007 Heat meters - Part 2: Constructional requirements I.S. EN :2005/AC:2007 Adhesives - Short term method for measuring the emission properties of low-solvent or solvent-free adhesives after application - Part 1: General procedure I.S. EN 3-9:2006/AC:2007 Portable fire extinguishers - Part 9: Additional requirements to EN 3-7 for pressure resistance of CO2 extinguishers I.S. EN 3-8:2006/AC:2007 Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar I.S. EN :2007/AC:2007 Heat meters - Part 4: Pattern approval tests I.S. EN ISO :2005/AC:2007 Petroleum and natural gas industries - Completion fluids and materials - Part 1: Measurement of viscous properties of completion fluids (ISO :2003/Cor 1:2005) I.S. EN 54-17:2006/AC:2007 Fire detection and fire alarm systems - Part 17: Short-circuit isolators I.S. EN 560:2005/AC:2007 Gas welding equipment - Hose connections for equipment for welding, cutting and allied processes I.S. EN ISO :2050/AC:2007 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 4: Finishing welding of aluminium castings (ISO :2005)/Cor 1:2007) I.S. EN 15091:2006/AC:2007 Sanitary tapware - Electronic opening and closing sanitary tapware I.S. CEN TR 13233:2007/AC:2007 Advanced technical ceramics - Notations and symbols I.S. EN :2006/AC:2007 Pumps - Rotodynamic pumps - Circulation pumps having a rated power input not exceeding 200 W for heating installations and domestic hot water installations - Part 2: Noise test code (vibro-acoustics) for measuring structure- and fluid-borne noise Date: 18/07/2018 Page 4

5 I.S. EN 1762:2003/AC:2007 Rubber hoses and hose assemblies for liquefied petroleum gas, LPG (liquid or gaseous phase), and natural gas up to 25 bar (2,5 MPa) - Specification I.S. EN ISO 14912:2006/AC:2007 Gas analysis - Conversion of gas mixture composition data (ISO 14912:2003/Cor 1:2006) I.S. EN ISO :2006/AC:2007 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO :2006/Cor 1:2006) I.S. EN ISO 19439:2006/AC:2007 Enterprise integration - Framework for enterprise modelling (ISO 19439:2006/Cor 1:2006) I.S. EN :2007 Date published 7 JANUARY 2010 Ultrasonics - Hydrophones -- Part 3: Properties of hydrophones for ultrasonic fields up to 40 MHz (IEC :2007 (EQV)) I.S. EN :2007 Date published 7 JANUARY 2010 Ultrasonics - Hydrophones -- Part 2: Calibration for ultrasonic fields up to 40 MHz (IEC :2007 (EQV)) I.S. EN :2007 Date published 7 JANUARY 2010 Ultrasonics - Hydrophones -- Part 1: Measurement and characterization of medical ultrasonic fields up to 40 MHz (IEC :2007 (EQV)) I.S. EN :2007 Date published 7 JANUARY 2010 Industrial-process control valves -- Part 9: Test procedure for response measurements from step inputs (IEC :2007 (EQV)) I.S. EN :2003/AC:2007 Date published 12 JANUARY 2010 Household and similar electrical appliances - Safety -- Part 2-21: Particular requirements for storage water heaters (IEC :2002 (MOD)) S.R. CLC/TR 50510:2007 Date published 12 JANUARY 2010 Fibre optic access to end-user - A guideline to building of FTTX fibre optic network I.S. EN ISO :2004/AC:2007 Dentistry - Number coding system for rotary instruments - Part 1: General characteristics (ISO :2004/Cor 1:2007) I.S. EN ISO :2006/AC:2007 Indoor air - Part 9: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test chamber method (ISO :2006/Cor 1:2007) Date: 18/07/2018 Page 5

6 I.S. EN 877:1999/A1:2006/AC:2008 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance I.S. EN :2006/AC:2008 Bituminous mixtures - Material specifications - Part 1: Asphalt Concrete I.S. EN :2006/AC:2008 Bituminous mixtures - Material specifications - Part 2: Asphalt Concrete for very thin layers I.S. EN :2006/AC:2008 Bituminous mixtures - Material specifications - Part 3: Soft Asphalt I.S. EN :2006/AC:2008 Bituminous mixtures - Material specifications - Part 4: Hot Rolled Asphalt I.S. EN :2006/AC:2008 Bituminous mixtures - Material specifications - Part 5: Stone Mastic Asphalt I.S. EN :2006/AC:2008 Bituminous mixtures - Material specifications - Part 6: Mastic Asphalt I.S. EN :2006/AC:2008 Bituminous mixtures - Material specifications - Part 7: Porous Asphalt I.S. EN :2005/AC:2008 Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings I.S. EN :1997/A2:2008 Date published 7 JANUARY 2010 Luminaires -- Part 2-8: Particular requirements - Handlamps (IEC :1996/A2:2007 (EQV)) I.S. EN 60456:2005/AC:2008 Date published 12 JANUARY 2010 Clothes washing machines for household use - Methods for measuring the performance (IEC 60456:2003 (MOD)) S.R. CLC/TR 50454:2008 Date published 12 JANUARY 2010 Guide for the application of aluminium electrolytic capacitors I.S. EN :2008 Date published 7 JANUARY 2010 Fixed capacitors for use in electronic equipment -- Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors (IEC :2008 (EQV)) Date: 18/07/2018 Page 6

7 I.S. EN :2008 Date published 7 JANUARY 2010 Fixed capacitors for use in electronic equipment -- Part 11-1: Blank detail specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors - Assessment level EZ (IEC :2008 (EQV)) I.S. EN 1670:2007/AC:2008 Building hardware - Corrosion resistance - Requirements and test methods I.S. EN 342:2004/AC:2008 Protective clothing - Ensembles and garments for protection against cold I.S. EN :2007/AC:2008 Explosion prevention and protection in underground mines - Protective systems - Part 4: Automatic extinguishing systems for road headers I.S. EN ISO 23251:2007/AC:2008 Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems (ISO 23251:2006/Cor 1:2007) I.S. EN ISO 14978:2006/AC:2008 Geometrical product specifications (GPS) - General concepts and requirements for GPS measuring equipment (ISO 14978:2006/Cor 1:2008) I.S. EN ISO 8420:2002/AC:2008 Animal and vegetable fats and oils - Determination of content of polar compounds (ISO 8420:2002/Cor 1:2004) I.S. EN ISO 4074:2002/AC:2008 Natural latex rubber condoms Requirements and test methods (ISO 4074:2002/Cor 2:2008) S.R. CLC/TR 50455:2008 Date published 12 JANUARY 2010 List of interpretations on the EN series Automatic electrical controls for household and similar use I.S. EN :2006/AC:2008 Date published 12 JANUARY 2010 Railway applications - Electromagnetic compatibility -- Part 1: General I.S. EN :2006/AC:2008 Date published 12 JANUARY 2010 Railway applications - Electromagnetic compatibility -- Part 2: Emission of the whole railway system to the outside world I.S. EN :2006/AC:2008 Date published 12 JANUARY 2010 Railway applications - Electromagnetic compatibility -- Part 3-1: Rolling stock - Train and complete vehicle I.S. EN :2006/AC:2008 Date published 12 JANUARY 2010 Railway applications - Electromagnetic compatibility -- Part 3-2: Rolling stock - Apparatus Date: 18/07/2018 Page 7

8 I.S. EN :2006/AC:2008 Date published 12 JANUARY 2010 Railway applications - Electromagnetic compatibility -- Part 4: Emission and immunity of the signalling and telecommunications apparatus I.S. EN :2006/AC:2008 Date published 12 JANUARY 2010 Railway applications - Electromagnetic compatibility -- Part 5: Emission and immunity of fixed power supply installations and apparatus I.S. EN 50402:2005/A1:2008 Date published 12 JANUARY 2010 Electrical apparatus for the detection and measurement of combustible or toxic gases or vapours or of oxygen - Requirements on the functional safety of fixed gas detection systems I.S. EN :2008 Date published 12 JANUARY 2010 Cable networks for television signals, sound signals and interactive services -- Part 1: System performance of forward paths (IEC :2007 (EQV)) I.S. EN :2008 Date published 12 JANUARY 2010 Cable networks for television signals, sound signals and interactive services -- Part 4: Passive wideband equipment for coaxial cable networks (IEC :2007 (EQV)) I.S. EN :2008 Date published 12 JANUARY 2010 Cable networks for television signals, sound signals and interactive services -- Part 5: Headend equipment (IEC :2007 (EQV)) I.S. EN :2003/A1:2008 Date published 8 JANUARY 2010 Hand-held motor-operated electric tools - Safety -- Part 2-9: Particular requirements for tappers (IEC :2003/A1:2008 (EQV)) I.S. EN :2004/A1:2008 Date published 8 JANUARY 2010 Hand-held motor-operated electric tools - Safety -- Part 2-18: Particular requirements for strapping tools (IEC :2003/A1:2008 (EQV)) I.S. EN :2008 Date published 12 JANUARY 2010 Semiconductor devices - Mechanical and climatic test methods -- Part 38: Soft error test method for semiconductor devices with memory (IEC :2008 (EQV)) I.S. EN :2008 Date published 12 JANUARY 2010 Electrical safety in low voltage distribution systems up to V a.c. and V d.c. - Equipment for testing, measuring or monitoring of protective measures -- Part 12: Performance measuring and monitoring devices (PMD) (IEC :2007 (EQV)) I.S. EN :2002/A1:2008 Date published 12 JANUARY 2010 Integrated circuits - Measurement of electromagnetic emissions, 150 khz to 1 GHz -- Part 6: Measurement of conducted emissions - Magnetic probe method (IEC :2002/A1:2008 (EQV)) 100. I.S. EN :2008 Date published 12 JANUARY 2010 Devices for the connection of luminaires for household and similar purposes -- Part 1: General requirements (IEC :2005 (MOD)) Date: 18/07/2018 Page 8

9 I.S. EN :2008 Date published 12 JANUARY 2010 Quantities and units -- Part 6: Electromagnetism (IEC :2008 (EQV)) I.S. EN 1303:2005/AC:2008 Building hardware - Cylinders for locks - Requirements and test methods I.S. EN 14388:2005/AC:2008 Road traffic noise reducing devices - Specifications I.S. EN 15285:2008/AC:2008 Agglomerated stone - Modular tiles for flooring and stairs (internal and external) I.S. EN 13592:2003+A1:2007/AC:2008 Plastics sacks for household waste collection - Types, requirements and test methods I.S. EN 10293:2005/AC:2008 Steel castings for general engineering uses I.S. EN ISO 6009:1994/AC:2008 Hypodermic needles for single use - Colour coding for identification (ISO 6009:1992/Cor 1:2008) I.S. EN ISO 19108:2005/AC:2008 Geographic information - Temporal schema (ISO 19108:2002/Cor 1:2006) S.R. CEN TR :2008/AC:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the offflavour test - Part 3: Dry food S.R. CEN TR :2008/AC:2008 Paper and board intended to come into contact with foodstuffs - Calibration of the offflavour test - Part 2: Fatty food I.S. EN :2008 Date published 12 JANUARY 2010 Communication cables -- Part 4-2: General considerations for the use of cables - Guide to use I.S. EN :2008 Date published 12 JANUARY 2010 Rotating electrical machines -- Part 29: Equivalent loading and superposition techniques - Indirect testing to determine temperature rise (IEC :2008 (EQV)) I.S. EN :2008 Date published 12 JANUARY 2010 Rotating electrical machines -- Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines (IEC :2007 (EQV)) I.S. EN :2008 Date published 12 JANUARY 2010 Household and similar electrical appliances - Safety -- Part 2-108: Particular requirements for electrolysers (IEC :2008 (MOD)) Date: 18/07/2018 Page 9

10 I.S. EN :1998/A1:2008 Date published 12 JANUARY 2010 Magnetic materials -- Part 2: Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame (IEC :1996/A1:2008 (EQV)) I.S. HD 605 S2:2008 Date published 12 JANUARY 2010 Electric cables - Additional test methods I.S. EN :2007/AC:2008 Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 3: Test methods I.S. EN 10213:2007/AC:2008 Steel castings for pressure purposes I.S. EN 10340:2007/AC:2008 Steel castings for structural uses I.S. EN :2008/AC:2008 Date published 12 JANUARY 2010 High-voltage switchgear and controlgear -- Part 205: Compact switchgear assemblies for rated voltages above 52 kv (IEC :2008 (EQV)) I.S. EN :2007/AC:2008 Date published 12 JANUARY 2010 Explosive atmospheres -- Part 17: Electrical installations inspection and maintenance (IEC :2007 (EQV)) I.S. EN 15034:2006/AC:2008 Heating boilers - Condensing heating boilers for fuel oil S.R. CEN TS 15730:2008 Date published 13 FEBRUARY 2010 Earth-moving machinery - Guidelines for assessment of exposure to whole-body vibration of ride-on machines - Use of harmonized data measured by international institutes, organizations and manufacturers (ISO/TR 25398:2006) I.S. EN 15033:2006/AC:2008 Room sealed storage water heaters for the production of sanitary hot water using LPG for vehicles and boats I.S. EN ISO :2001/AC:2008 Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO :2001/Cor 1:2007) I.S. EN 14491:2006/AC: Dust explosion venting protective systems I.S. EN :2007/AC:2008 Explosion prevention and protection in underground mines - Protective systems - Part 2: Passive water trough barriers Date: 18/07/2018 Page 10

11 I.S. EN :2005/AC:2008 Eurocode 4 - Design of composite steel and concrete structures - Part 2: General rules and rules for bridges I.S. EN :2005/AC:2008 Eurocode 1 - Actions on structures - Part 1-6: General actions - Actions during execution I.S. EN ISO :2005/AC:2008 Quality requirements for fusion welding of metallic materials - Part 5: Documents with which it is necessary to conform to claim conformity to the quality requirements of ISO , ISO or ISO (ISO :2005/Cor 1:2007) I.S. EN 13176:2008/LC:2008 Date published 13 FEBRUARY 2010 Chemicals used for treatment of water intended for human consumption - Ethanol I.S. EN ISO 8041:2005/AC:2008 Human response to vibration - Measuring instrumentation (ISO 8041:2005/Cor 1:2007) I.S. EN ISO 19115:2005/AC:2008 Geographic information - Metadata (ISO 19115:2003/Cor 1:2006) I.S. EN ISO 9936:2006/AC:2008 Animal and vegetable fats and oils - Determination of tocopherol and tocotrienol contents by high-performance liquid chromatography (ISO 9936:2006/Cor 1:2008) I.S. EN 539-2:2006/AC:2008 Clay roofing tiles for discontinuous laying - Determination of physical characteristics - Part 2: Test for frost resistance I.S. EN :2006/AC:2008 Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels I.S. EN 14604:2005/AC:2008 Smoke alarm devices I.S. EN 14444:2005/AC:2008 Structural adhesives - Qualitative assessment of durability of bonded assemblies - Wedge rupture test (ISO 10354:1992 modified) I.S. EN :2000/AC:2008 Cookware - Domestic cookware for use on top of a stove, cooker or hob - Part 1: General requirements I.S. EN 14343:2005/AC:2008 Rotary positive displacement pumps - Performance tests for acceptance Date: 18/07/2018 Page 11

12 I.S. EN ISO :1999/AC:2008 Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO :1998/Cor 1:2007) I.S. EN 12487:2007/AC:2008 Corrosion protection of metals - Rinsed and non-rinsed chromate conversion coatings on aluminium and aluminium alloys I.S. EN 10324:2004/AC:2008 Steel wire and wire products - Hose reinforcement wire I.S. EN :1999/A2:2008 Date published 12 JANUARY 2010 Switches for household and similar fixed-electrical installations -- Part 1: General requirements (IEC :1998/A2:2006 (MOD)) I.S. EN :2006/AC:2008 Bituminous mixtures - Material specifications - Part 20: Type Testing I.S. EN :2006/AC:2008 Bituminous mixtures - Material specifications - Part 21: Factory Production Control I.S. EN ISO :2000/AC:2008 Water quality - Detection and enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method (ISO :2000/Cor 1:2007) I.S. EN ISO :2004/AC:2008 Safety devices for protection against excessive pressure - Part 7: Common data (ISO :2004/Cor 1:2006) I.S. EN 12794:2005+A1:2007/AC:2008 Precast concrete products - Foundation piles I.S. EN 54-20:2006/AC:2008 Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors I.S. EN ISO :2005/AC:2008 Optics and photonics - Microlens arrays - Part 1: Vocabulary (ISO :2001/Cor 1:2003/Cor 2:2005) I.S. EN 14509:2006/AC:2008 Self-supporting double skin metal faced insulating panels - Factory made products - Specifications I.S. EN 14491:2006/AC: Dust explosion venting protective systems S.R. CWA 15899:2008 Date published 13 FEBRUARY 2010 Standardization of an Innovation Capability Rating for SMEs Date: 18/07/2018 Page 12

13 I.S. EN :2003 Solar protection devices combined with glazing - Calculation of solar and light transmittance - Part 1: Simplified method I.S. EN 676:2003+A2:2008/AC:2008 Automatic forced draught burners for gaseous fuels I.S. EN 15543:2008/AC:2008 Glass packaging - Finishes for bottles - Screw thread finishes for bottles for noncarbonated liquids I.S. EN :2008 Date published 12 JANUARY 2010 Optical fibre cables -- Part 3-50: Outdoor cables - Family specification for gas pipe cables and subducts for installation by blowing and/or pulling/dragging in gas pipes (IEC :2008 (EQV)) I.S. EN :2008 Date published 12 JANUARY 2010 Optical fibre cables -- Part 3-60: Outdoor cables - Family specification for drinking water pipe cables and subducts for installation by blowing and/or pulling/dragging/floating in drinking water pipes (IEC :2008 (EQV)) I.S. EN :2008 Date published 12 JANUARY 2010 High-voltage switchgear and controlgear -- Part 1: Common specifications (IEC :2007 (EQV)) I.S. EN 62431:2008 Date published 12 JANUARY 2010 Reflectivity of electromagnetic wave absorbers in millimetre wave frequency - Measurement methods (IEC 62431:2008 (EQV)) I.S. EN ISO/IEC 17025:2005/AC:2006 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2005/Cor.1:2006) I.S. EN 1916:2002/AC:2008 Concrete pipes and fittings, unreinforced, steel fibre and reinforced I.S. EN 1917:2002/AC:2008 Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced S.R. CEN ISO TS :2007/AC:2008 Geometrical product specifications (GPS) - General concepts - Part 1: Model for geometrical specification and verification (ISO/TS :2005/Cor 1:2007) I.S. EN ISO :2006/AC:2008 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO :2006/Cor 1:2007) Date: 18/07/2018 Page 13

14 I.S. EN :2003/AC:2008 Advanced technical ceramics - Ceramic composites, thermophysical properties - Part 3: Determination of specific heat capacity I.S. EN :2004/AC:2008 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes I.S. EN 12151:2007/LC:2008 Date published 13 FEBRUARY 2010 Machinery and plants for the preparation of concrete and mortar - Safety requirements I.S. EN 548:2004/AC:2007 Resilient floor coverings - Specification for plain and decorative linoleum I.S. CEN TS 15448:2006/AC:2007 Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) I.S. EN 14878:2007/AC:2009 Textiles - Burning behaviour of children's nightwear - Specification I.S. EN ISO 21487:2006/AC:2009 Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2006/Cor 1:2008) I.S. EN 15305:2008/AC:2009 Non-destructive Testing - Test Method for Residual Stress analysis by Xray Diffraction I.S. EN ISO :2007/AC:2009 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 806-3:2007/Cor 1:2009) I.S. EN ISO 11689:1997/AC:2009 Acoustics - Procedure for the comparison of noise-emission data for machinery and equipment (ISO 11689:1996/Cor 1:2007) I.S. EN :2003/AC:2009 Eurocode 1 - Actions on structures - Part 1-3: General actions - Snow loads I.S. EN ISO 463:2006/AC:2009 Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006/Cor 1:2007/Cor 2:2009) I.S. EN ISO 1248:2008/AC:2009 Iron oxide pigments - Specifications and methods of test (ISO 1248:2006 including Technical Corrigendum 1:2007 and Cor 2:2008) Date: 18/07/2018 Page 14

15 I.S. EN 15532:2008/AC:2009 Cycles - Terminology I.S. EN ISO :2007/AC:2009 Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 2: Fusion-bonded epoxy coatings (ISO :2007/Cor 1:2008) I.S. EN ISO :2008/AC:2009 Dentistry - Base polymers - Part 1: Denture base polymers (ISO :2008/Cor 1:2009) I.S. EN ISO :2008/AC:2009 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO :2006/Cor 1:2009) I.S. EN :2008/AC:2009 Qualitative classification of softwood round timber - Part 2: Pines I.S. EN :2005/AC:2009 Eurocode 3: Design of steel structures - Part 1-9: Fatigue I.S. EN :2005/AC:2009 Free-standing chimneys - Part 7: Product specifications of cylindrical steel fabrications for use in single wall steel chimneys and steel liners I.S. EN ISO :2004/AC:2009 Acoustics - Measurement of sound insulation in buildings and of building elements - Part 14: Guidelines for special situations in the field (ISO :2004/Cor 1:2007) I.S. EN ISO 10684:2004/AC:2009 Fasteners - Hot dip galvanized coatings (ISO 10684:2004/Cor 1:2008) I.S. EN ISO :2006/AC:2009 Sterilization of medical devices - Microbiological methods - Part 1: Determination of a population of microorganisms on products (ISO :2006/Cor 1:2007) I.S. EN ISO :2007/AC:2009 Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO :2006/Cor 1:2009) S.R. CEN ISO TS :2008/AC:2009 Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO (ISO/TS :2008/Cor 1:2009) I.S. EN 15238:2006/AC:2009 Soil improvers and growing media - Determination of quantity for materials with particle size greater than 60 mm Date: 18/07/2018 Page 15

16 I.S. EN ISO :2006/AC:2009 Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO :2006/Cor 1:2006) I.S. EN ISO 11337:2004/AC:2009 Plastics - Polyamides - Determination of ε-caprolactam and ω-laurolactam by gas chromatography (ISO 11337:2004/Cor 1:2007) I.S. EN ISO 10548:2003/AC:2009 Carbon fibre - Determination of size content (ISO 10548:2002/Cor 1:2008) I.S. EN ISO :2005/AC:2009 Glass containers - Vacuum lug finishes - Part 14: 110 regular (ISO :2005/Cor 1:2008) I.S. EN ISO 19879:2005/AC:2009 Metallic tube connections for fluid power and general use - Test methods for hydraulic fluid power connections (ISO 19879:2005/Cor 1:2007) I.S. EN :2007 Date published 7 JANUARY 2010 Optical amplifiers - Test methods -- Part 10-4: Multichannel parameters - Interpolated source subtraction method using an optical spectrum analyzer (IEC :2007 (EQV)) I.S. EN :2007 Date published 7 JANUARY 2010 Fixed capacitors for use in electronic equipment -- Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO 2 ) and non-solid electrolyte (IEC :2007 (EQV)) I.S. EN :2007 Date published 7 JANUARY 2010 Fixed capacitors for use in electronic equipment -- Part 4: Sectional specification - Aluminium electrolytic capacitors with solid (MnO 2 ) and non-solid electrolyte (IEC :2007 (EQV)) S.R. CLC/TR 50531:2009 Date published 12 JANUARY 2010 Alarm systems - Terms and definitions I.S. EN :2009 Date published 12 JANUARY 2010 Household appliances interworking -- Part 1: Functional specification I.S. EN :2009 Date published 12 JANUARY 2010 Household appliances interworking -- Part 2: Data structures I.S. EN :2004/AC:2007 Date published 12 JANUARY 2010 Switches for household and similar fixed electrical installations -- Part 2-1: Particular requirements - Electronic switches (IEC :2002 (MOD)) Date: 18/07/2018 Page 16

17 I.S. EN :2009 Date published 12 JANUARY 2010 Materials for printed boards and other interconnecting structures -- Part 4-14: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Epoxide woven E-glass prepreg of defined flammability (vertical burning test) for leadfree assembly (IEC :2009 (EQV)) I.S. EN :2009 Date published 12 JANUARY 2010 Materials for printed boards and other interconnecting structures -- Part 4-15: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly (IEC :2009 (EQV)) I.S. EN :2009 Date published 12 JANUARY 2010 Materials for printed boards and other interconnecting structures -- Part 4-16: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Multifunctional non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly (IEC :2009 (EQV)) I.S. EN :2009 Date published 12 JANUARY 2010 Materials for printed boards and other interconnecting structures -- Part 4-17: Sectional specification set for prepreg materials, unclad (for the manufacture of multilayer boards) - Non-halogenated epoxide woven E-glass prepreg of defined flammability (vertical burning test) for lead-free assembly (IEC :2009 (EQV)) I.S. EN 61535:2009 Date published 19 JANUARY 2010 Installation couplers intended for permanent connection in fixed installations (IEC 61535:2009 (EQV)) I.S. EN 50520:2009 Date published 19 JANUARY 2010 Cover plates and cover tapes for the protection and location warning of buried cables or buried conduits in underground installations I.S. EN 50524:2009 Date published 19 JANUARY 2010 Data sheet and name plate for photovoltaic inverters I.S. EN :2009 Date published 19 JANUARY 2010 Printed boards and printed board assemblies - Design and use -- Part 7: Electronic component zero orientation for CAD library construction (IEC :2009 (EQV)) I.S. EN :2009 Date published 19 JANUARY 2010 Electrical insulation systems - Procedures for thermal evaluation -- Part 21: Specific requirements for general-purpose models - Wire-wound applications (IEC :2009 (EQV)) I.S. EN :2009 Date published 19 JANUARY 2010 High-voltage switchgear and controlgear -- Part 104: Alternating current switches for rated voltages of 52 kv and above (IEC :2009 (EQV)) I.S. EN 50274:2002/AC:2009 Date published 19 JANUARY 2010 Low-voltage switchgear and controlgear assemblies - Protection against electric shock - Protection against unintentional direct contact with hazardous live parts Date: 18/07/2018 Page 17

18 216. I.S. EN :2009 Date published 19 JANUARY 2010 Lead-acid starter batteries -- Part 4: Dimensions of batteries for heavy vehicles 217. I.S. EN 55012:2007/A1:2009 Date published 19 JANUARY 2010 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers (CISPR 12:2007/A1:2009 (EQV)) 218. I.S. EN :2007/A2:2009 Date published 19 JANUARY 2010 Specification for radio disturbance and immunity measuring apparatus and methods -- Part 1-4: Radio disturbance and immunity measuring apparatus - Ancillary equipment - Radiated disturbances (CISPR :2007/A2:2008 (EQV)) 219. I.S. EN :2009 Date published 19 JANUARY 2010 Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use -- Part 1: Emissions 220. I.S. EN :2009 Date published 19 JANUARY 2010 Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use -- Part 2: Immunity 221. I.S. EN :2009 Date published 9 FEBRUARY 2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-34: Tests - Resistance to solvents and contaminating fluids of interconnecting components and closures (IEC :2009 (EQV)) 222. I.S. EN :2009 Date published 19 JANUARY 2010 Live working - Protective clothing against the thermal hazards of an electric arc -- Part 1-1: Test methods - Method 1: Determination of the arc rating (ATPV or EBT50) of flame resistant materials for clothing (IEC :2009 (EQV)) 223. I.S. EN 61822:2009 Date published 19 JANUARY 2010 Electrical installations for lighting and beaconing of aerodromes - Constant current regulators (IEC 61822:2009 (EQV)) 224. I.S. EN 62365:2009 Date published 19 JANUARY 2010 Digital audio - Digital input-output interfacing - Transmission of digital audio over asynchronous transfer mode (ATM) networks (IEC 62365:2009 (EQV)) 225. I.S. EN :2009 Date published 16 JANUARY 2010 Potentiometers for use in electronic equipment -- Part 1: Generic specification (IEC :2008 (EQV)) 226. I.S. EN :2009 Date published 16 JANUARY 2010 Hand-held motor-operated electric tools - Safety -- Part 2-13: Particular requirements for chain saws (IEC :2006 (MOD)) 227. I.S. EN :2009 Date published 16 JANUARY 2010 Hand-held motor-operated electric tools - Safety -- Part 2-15: Particular requirements for hedge trimmers (IEC :2006 (MOD)) Date: 18/07/2018 Page 18

19 I.S. EN :2009 Date published 16 JANUARY 2010 Hand-held motor-operated electric tools - Safety -- Part 2-19: Particular requirements for jointers (IEC :2005 (MOD)) I.S. EN :2006/A1:2009 Date published 16 JANUARY 2010 Low-voltage switchgear and controlgear -- Part 2: Circuit-breakers (IEC :2006/A1:2009 (EQV)) I.S. EN :2006/A1:2009 Date published 16 JANUARY 2010 Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A per phase) (IEC :2005/A1:2008 (EQV)) I.S. EN :2006/A2:2009 Date published 16 JANUARY 2010 Electromagnetic compatibility (EMC) -- Part 3-2: Limits - Limits for harmonic current emissions (equipment input current 16 A per phase) (IEC :2005/A2:2009 (EQV)) I.S. EN :2009 Date published 15 JANUARY 2010 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 3: Electrical safety requirements I.S. EN 60059:1999/A1:2009 Date published 15 JANUARY 2010 IEC standard current ratings (IEC 60059:1999/A1:2009 (EQV)) I.S. EN :2009 Date published 15 JANUARY 2010 Environmental testing -- Part 2-14: Tests - Test N: Change of temperature (IEC :2009 (EQV)) I.S. EN 60196:2009 Date published 15 JANUARY 2010 IEC standard frequencies (IEC 60196:2009 (EQV)) I.S. EN :2003/A1:2009 Date published 15 JANUARY 2010 Sound system equipment -- Part 5: Loudspeakers (IEC :2003/A1:2007 (EQV)) I.S. EN :2007/A1:2009 Date published 15 JANUARY 2010 Low-voltage fuses -- Part 1: General requirements (IEC :2006/A1:2009 (EQV)) I.S. EN :2003/AC:2009 Date published 15 JANUARY 2010 Household and similar electrical appliances - Safety -- Part 1: General requirements (IEC :2001 (MOD)) I.S. EN :2009 Date published 15 JANUARY 2010 Hand-held motor-operated electric tools - Safety -- Part 1: General requirements (IEC :2006 (MOD)) I.S. EN :2009 Date published 15 JANUARY 2010 Hand-held motor-operated electric tools - Safety -- Part 2-21: Particular requirements for drain cleaners (IEC :2002 (MOD)) Date: 18/07/2018 Page 19

20 I.S. EN :2009 Date published 15 JANUARY 2010 Safety of transportable motor-operated electric tools -- Part 1: General requirements (IEC :1990 (MOD)) S.R. CLC/TR :2009 Date published 19 JANUARY 2010 Field device tool (FDT) interface specification -- Part 41: Object model integration profile - Common object model (IEC/TR :2009 (EQV)) S.R. CLC/TR :2009 Date published 19 JANUARY 2010 Field device tool (FDT) interface specification -- Part 501: Communication implementation for common object model - IEC CPF 1 (IEC/TR :2009 (EQV)) S.R. CLC/TR :2009 Date published 19 JANUARY 2010 Field device tool (FDT) interface specification -- Part 502: Communication implementation for common object model - IEC CPF 2 (IEC/TR :2009 (EQV)) S.R. CLC/TR :2009 Date published 19 JANUARY 2010 Field device tool (FDT) interface specification -- Part 503-1: Communication implementation for common object model - IEC CP 3/1 and CP 3/2 (IEC/TR :2009 (EQV)) S.R. CLC/TR :2009 Date published 19 JANUARY 2010 Field device tool (FDT) interface specification -- Part 503-2: Communication implementation for common object model - IEC CP 3/4, CP 3/5 and CP 3/6 (IEC/TR :2009 (EQV)) S.R. CLC/TR :2009 Date published 19 JANUARY 2010 Field device tool interface (FDT) specification -- Part 61: Device type manager (DTM) - Styleguide for common object model (IEC/TR :2009 (EQV)) I.S. EN :2009 Date published 19 JANUARY 2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-1: Tests - Vibration (sinusoidal) (IEC :2009 (EQV)) I.S. EN :2009 Date published 19 JANUARY 2010 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-12: Tests - Impact (IEC :2009 (EQV)) I.S. EN :2001/A11:2009 Date published 19 JANUARY 2010 Uninterruptible power systems (UPS) -- Part 3: Method of specifying the performance and test requirements I.S. EN :2009 Date published 19 JANUARY 2010 Fibre optic interconnecting devices and passive components - Fibre optic closures -- Part 1: Generic specification (IEC :2009 (EQV)) Date: 18/07/2018 Page 20

21 I.S. EN :2009 Date published 13 FEBRUARY 2010 Aerospace series - Lamps, incandescent - Part 006: Lamp, code 73E - Product standard I.S. EN ISO :2009 Date published 29 JANUARY 2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO :2009) I.S. EN ISO :2009 Date published 29 JANUARY 2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 8: Saws, polishing and filing machines with reciprocating action and saws with oscillating or rotating action (ISO :2009) I.S. EN ISO :2009 Date published 29 JANUARY 2010 Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 9: Scaling hammers and needle scalers (ISO :2009) I.S. EN ISO :2009 Date published 29 JANUARY 2010 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 1: General principles of design and corrosion resistance (ISO :2009) I.S. EN ISO :2009 Date published 29 JANUARY 2010 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 2: Hot dip galvanizing (ISO :2009) I.S. EN ISO :2009 Date published 29 JANUARY 2010 Zinc coatings - Guidelines and recommendations for the protection against corrosion of iron and steel in structures - Part 3: Sherardizing (ISO :2009) I.S. EN 15763:2009 Date published 29 JANUARY 2010 Foodstuffs - Determination of trace elements - Determination of arsenic, cadmium, mercury and lead in foodstuffs by inductively coupled plasma mass spectrometry (ICP- MS) after pressure digestion I.S. EN 15764:2009 Date published 29 JANUARY 2010 Foodstuffs - Determination of trace elements - Determination of tin by flame and graphite furnace atomic absorption spectrometry (FAAS and GFAAS) after pressure digestion I.S. EN 15765:2009 Date published 29 JANUARY 2010 Foodstuffs - Determination of trace elements - Determination of tin by inductively coupled plasma mass spectrometry (ICP-MS) after pressure digestion I.S. EN ISO :2009 Date published 29 JANUARY 2010 Animal and vegetable fats and oils - Gas chromatography of fatty acid methyl esters - Part 3: Preparation of methyl esters using trimethylsulfonium hydroxide (TMSH) (ISO :2009) Date: 18/07/2018 Page 21

22 I.S. EN ISO 11701:2009 Date published 29 JANUARY 2010 Vegetable fats and oils - Determination of phospholipids content in lecithins by HPLC using a light-scattering detector (ISO 11701:2009) I.S. EN ISO 11702:2009 Date published 29 JANUARY 2010 Animal and vegetable fats and oils - Enzymatic determination of total sterols content (ISO 11702:2009) I.S. EN 15103:2009 Date published 29 JANUARY 2010 Solid biofuels - Determination of bulk density I.S. EN ISO 24333:2009 Date published 29 JANUARY 2010 Cereals and cereal products - Sampling (ISO 24333:2009) I.S. EN ISO 3093:2009 Date published 29 JANUARY 2010 Wheat, rye and their flours, durum wheat and durum wheat semolina - Determination of the falling number according to Hagberg-Perten (ISO 3093:2009) I.S. EN :2009 Date published 29 JANUARY 2010 Organic coating systems and linings for protection of industrial apparatus and plants against corrosion caused by aggressive media - Part 6: Combined linings with tile and brick layers I.S. EN ISO :2009 Date published 29 JANUARY 2010 Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO :2009) S.R. CWA 15044:2009 Date published 29 JANUARY 2010 Test and evaluation of demining machines S.R. CWA 16052:2009 Date published 29 JANUARY 2010 ICT Certification in Europe I.S. EN ISO 18592:2009 Date published 29 JANUARY 2010 Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens (ISO 18592:2009 I.S. EN ISO :2009 Date published 29 JANUARY 2010 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 3: In vitro diagnostic instruments for professional use (ISO :2009) I.S. EN :2004/NA:2010 Date published 6 JANUARY 2010 Irish National Annex to Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings I.S. EN :2004+NA+AC:2010 Date published 6 JANUARY 2010 Eurocode 2: Design of concrete structures - Part 1-1: General rules and rules for buildings (Including Irish National Annex) Date: 18/07/2018 Page 22

23 NA to I.S. EN :2005 Date published 6 JANUARY 2010 Irish National Annex to Eurocode 5: Design of timber structures - Part 2: Bridges I.S. EN :2005+NA:2010 Date published 6 JANUARY 2010 Eurocode 5: Design of timber structures - Part 2: Bridges (Including Irish National Annex) I.S. EN :2005/A11:2008 Date published 7 JANUARY 2010 Household and similar electrical appliances - Safety -- Part 2-76: Particular requirements for electric fence energizers I.S. EN :2002/A2:2008 Date published 7 JANUARY 2010 Switches for appliances -- Part 1: General requirements (IEC :2000/A2:2007 (EQV)) I.S. EN :2002/A1:2007 Date published 7 JANUARY 2010 Communication cables -- Part 2-26: Common design rules and construction - Halogen free flame retardant insulation compounds I.S. EN :2004/A1:2008 Date published 7 JANUARY 2010 Coaxial cables -- Part 2-4: Sectional specification for cables used in cabled distribution networks - Indoor drop cables for systems operating at 5 MHz MHz I.S. EN :2008 Date published 7 JANUARY 2010 Arc welding equipment -- Part 5: Wire feeders (IEC :2007 (EQV)) I.S. EN :2008 Date published 7 JANUARY 2010 Solderless connections -- Part 5: Press-in connections - General requirements, test methods and practical guidance (IEC :2008 (EQV)) I.S. EN :1999/IS 1:2009 Date published 12 JANUARY 2010 Switches for household and similar fixed-electrical installations -- Part 1: General requirements I.S. EN 81-2:1998+A3:2009 Date published 29 JANUARY 2010 Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts I.S. EN 208:2009 Date published 29 JANUARY 2010 Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) I.S. EN 13195:2009 Date published 29 JANUARY 2010 Aluminium and aluminium alloys - Specifications for wrought and cast products for marine applications (shipbuilding, marine and offshore) I.S. EN ISO 12706:2009 Date published 29 JANUARY 2010 Non-destructive testing - Penetrant testing - Vocabulary (ISO 12706:2009) Date: 18/07/2018 Page 23

24 I.S. EN 453:2000+A1:2009 Date published 29 JANUARY 2010 Food processing machinery - Dough mixers - Safety and hygiene requirements I.S. EN 454:2000+A1:2009 Date published 29 JANUARY 2010 Food processing machinery - Planetary mixers - Safety and hygiene requirements I.S. EN 13288:2005+A1:2009 Date published 29 JANUARY 2010 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements I.S. EN 13389:2005+A1:2009 Date published 29 JANUARY 2010 Food processing machinery - Mixers with horizontal shafts - Safety and hygiene requirements I.S. EN 13390:2002+A1:2009 Date published 29 JANUARY 2010 Food processing machinery - Pie and tart machines - Safety and hygiene requirements I.S. EN 13591:2005+A1:2009 Date published 29 JANUARY 2010 Food processing machinery - Fixed deck oven loaders - Safety and hygiene requirements I.S. EN 15805:2009 Date published 29 JANUARY 2010 Particulate air filters for general ventilation - Standardised dimensions I.S. EN ISO :2009 Date published 29 JANUARY 2010 Characterization of pavement texture by use of surface profiles - Part 5: Determination of megatexture (ISO :2009) I.S. EN :2009 Date published 29 JANUARY 2010 Railway applications - Gauges - Part 1: General - Common rules for infrastructure and rolling stock I.S. EN :2009 Railway applications - Gauges - Part 2: Rolling stock gauge I.S. EN :2009 Date published 29 JANUARY 2010 Railway applications - Gauges - Part 3: Structure gauges I.S. EN :2009 Date published 29 JANUARY 2010 Railway applications - Track - Railbound construction and maintenance machines - Part 3: General safety requirements S.R. CEN TS 15956:2009 Date published 29 JANUARY 2010 Fertilizers - Extraction of phosphorus soluble in mineral acids S.R. CEN TS 15957:2009 Date published 29 JANUARY 2010 Fertilizers - Extraction of phosphorus which is soluble in neutral ammonium citrate Date: 18/07/2018 Page 24