CERTIFICATE. with the organizational units/sites as listed in the annex. has implemented and maintains a Quality and Environmental Management System.
|
|
|
- Opal Gibson
- 5 years ago
- Views:
Transcription
1 CERTIFICATE This is to certify that GmbH & Co. OHG GLS -Straße 1-7 with the organizational units/sites as listed in the annex has implemented and maintains a Quality and Environmental Management System. Scope: International and domestic parcel and freight logistics Through an audit, documented in a report, it was verified that the management system fulfills the requirements of the following standards: ISO 9001 : 2015 ISO : 2015 Certificate registration no. Excerpt from certificate registration no. Valid from Valid until Date of certification QM15 UM QM15 UM DQS GmbH Frank Graichen Managing Director Accredited Body: DQS GmbH, August-Schanz-Straße 21, Frankfurt am Main, 1 / 8
2 GmbH & Co. OHG GLS -Straße GmbH & Co. OHG Loftwerk Eschborn Helfmann-Park Eschborn Depot 10 GmbH & Co. OHG Osdorfer Ring Großbeeren Depot 11 GmbH & Co. OHG Potsdamer Straße Bernau, OT Schönow Depot 12 GmbH & Co. OHG Am Ausbau Nuthetal Depot 13 GmbH & Co. OHG In der Lehmkuhlenbreite Barleben / Ostfalenpark Depot 14 GmbH & Co. OHG An der Autobahn Cottbus Depot 15 GmbH & Co. OHG Johann-Esche-Straße Limbach-Oberfrohna Depot 16 GmbH & Co. OHG Am Sülzenbrückener Weg Amt Wachsenburg, OT Thörey Depot 17 GmbH & Co. OHG Langes Feld Kabelsketal-Zwintschöna Depot 18 GmbH & Co. OHG Gewerbering Süd Bretnig with the above-mentioned certificate. 2 / 8
3 GmbH & Co. OHG GLS -Straße Depot 19 GmbH & Co. OHG An der Autobahn Neustadt-Glewe Depot 20 GmbH & Co. OHG Pinkertweg Hamburg Depot 21 GmbH & Co. OHG Holland-Merten-Straße Südharz, OT Roßla Depot 23 GmbH & Co. OHG Donaubogen Neumünster Depot 25 GmbH & Co. OHG Lise-Meitner-Allee Tornesch Depot 27 GmbH & Co. OHG Dieselstraße 1d Meppen Depot 28 GmbH & Co. OHG Malthusstraße Bremen Depot 29 GmbH & Co. OHG August-Wilhelm-Kühnholz-Straße Oldenburg Depot 30 GmbH & Co. OHG Koldinger Straße Laatzen, OT Rethen Depot 33 GmbH & Co. OHG Christian-Pommer-Straße Braunschweig with the above-mentioned certificate. 3 / 8
4 GmbH & Co. OHG GLS -Straße Depot 35 GmbH & Co. OHG Robert-Bosch-Straße Guxhagen Depot 36 GmbH & Co. OHG Seltzerstraße Burow Depot 37 GmbH & Co. OHG Oststraße Hermsdorf Depot 40 GmbH & Co. OHG Am Fuchsberg Neuss Depot 41 GmbH & Co. OHG Am Binsig Hallerndorf Depot 42 GmbH & Co. OHG Am Schornacker Wesel Depot 44 GmbH & Co. OHG Ahornring Roggentin Depot 45 GmbH & Co. OHG Industriestraße Westerkappeln-Velpe Depot 46 GmbH & Co. OHG Huckarder Straße Dortmund Depot 47 GmbH & Co. OHG Unterwanger Straße Kempten (Allgäu) with the above-mentioned certificate. 4 / 8
5 GmbH & Co. OHG GLS -Straße Depot 48 GmbH & Co. OHG Piderits Bleiche Bielefeld Depot 49 GmbH & Co. OHG Konrad-Zuse-Straße 2a Alsdorf Depot 50 GmbH & Co. OHG Robert-Bosch-Straße Bornheim Depot 54 GmbH & Co. OHG Im Gohl Polch Depot 56 GmbH & Co. OHG In der Fleute Wuppertal Depot 60 GmbH & Co. OHG Robert-Koch-Straße Mainz-Hechtsheim Depot 62 GmbH & Co. OHG Am Weiher Kelsterbach Depot 63 GmbH & Co. OHG Industriegebiet Alsberg Rennerod Depot 64 GmbH & Co. OHG Lingenfeld Depot 65 GmbH & Co. OHG Gewerbepark Garham Hofkirchen with the above-mentioned certificate. 5 / 8
6 GmbH & Co. OHG GLS -Straße Depot 66 GmbH & Co. OHG Boxbergweg Neunkirchen Depot 67 GmbH & Co. OHG Gewerbepark Chammünster Süd Cham Depot 68 GmbH & Co. OHG Rudolf-Diesel-Straße Mannheim Depot 69 GmbH & Co. OHG Bahnhofstraße Sehlem Depot 70 GmbH & Co. OHG Otto-Hahn-Straße Vaihingen an der Enz Depot 71 GmbH & Co. OHG Böllinger Straße Heilbronn-Neckargartach Depot 72 GmbH & Co. OHG Karl-Maybach-Straße Wangen Depot 73 GmbH & Co. OHG Austraße Weilheim a. d. Teck Depot 74 GmbH & Co. OHG Rudolf-Diesel-Straße Empfingen Depot 75 GmbH & Co. OHG Messering Rheinstetten with the above-mentioned certificate. 6 / 8
7 GmbH & Co. OHG GLS -Straße Depot 76 GmbH & Co. OHG Drei Linden Schutterwald Depot 77 GmbH & Co. OHG Raiffeisenstraße Donaueschingen Depot 78 GmbH & Co. OHG Ballrechten-Dottinger-Straße Eschbach Depot 79 GmbH & Co. OHG Ernst-Abbe-Straße Ulm-Donautal Depot 80 GmbH & Co. OHG Am Kletthamer Feld Erding Depot 81 GmbH & Co. OHG Breitenbachstraße Geretsried-Gelting Depot 82 GmbH & Co. OHG Innerlohener Straße Grabenstätt Depot 83 GmbH & Co. OHG Daimlerstraße Feuchtwangen Depot 84 GmbH & Co. OHG Sachsenring Straubing Depot 85 GmbH & Co. OHG Hamburger Straße Nürnberg-Hafen with the above-mentioned certificate. 7 / 8
8 GmbH & Co. OHG GLS -Straße Depot 86 GmbH & Co. OHG Zum Kugelfang Naila Depot 87 GmbH & Co. OHG GLS-Straße Schaafheim Depot 88 GmbH & Co. OHG Wachtelberg Kürnach Depot 89 GmbH & Co. OHG Welserstraße Gersthofen with the above-mentioned certificate. 8 / 8
CERTIFICATE. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Design, engineering, manufacturing and sales
CERTIFICATE. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : inks and specialty chemicals for the printing
CERTIFICATE. EJOT Holding GmbH & Co. KG. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Energy Management System. : selling of screws, cold shaped parts, thermoplastic
CERTIFICATE. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains an Occupational Health and Safety Management System. Scope: Development, production
EC-CERTIFICATE (Full quality assurance system)
EC-CERTIFICATE (Full quality assurance system) This is to certify that the company has implemented and maintains a full quality assurance system which applies to the products at every stage from design
CERTIFICATE. Renesas Semiconductor Package & Test Solutions Co., Ltd. Oita Factory 4200 Idoda, Nakatsu-shi, Oita Japan
CERTIFICATE This is to certify that has implemented and maintains a Quality Management System. : The design and manufacture of semiconductor devices. An audit, conducted and documented in a report, has
CERTIFICATE. Scope: The design and manufacture of semiconductor devices.
CERTIFICATE This is to certify that has implemented and maintains a Quality Management System. : The design and manufacture of semiconductor devices. An audit, conducted and documented in a report, has
CERTIFICATE. Momentive Performance Materials Inc. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Sales, design, manufacturing and supporting business
Annex to the Accreditation Certificate D-ZM according to DIN EN ISO/IEC :2015
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZM-16074-01-00 according to DIN EN ISO/IEC 17021-1:2015 Period of validity: 09.06.2017 to 21.12.2019 Holder of certificate:
CERTIFICATE. with the organizational units/sites as listed in the annex
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : The design and manufacture of: audio and video
CERTIFICATE IQNet and DQS GmbH Deutsche Gesellschaft zur Zertifizierung von Managementsystemen hereby certify that the company
CERTIFICATE IQNet and DQS GmbH Deutsche Gesellschaft zur Zertifizierung von Managementsystemen hereby certify that the company with the organizational units/sites as listed in the annex has implemented
CERTIFICATE. Scope: The design and manufacture of semiconductor devices.
CERTIFICATE This is to certify that has implemented and maintains a Quality Management System. : The design and manufacture of semiconductor devices. An audit, conducted and documented in a report, has
Cleaning and care Updated: 08 / 2016, This issue supersedes all previous issues
recommendations for sports halls Sport Linoleum floor coverings With Linodur Sport or Colorette Sport and Nature (Linea) Sport, you have a sports surface covering that has excellent functional sports and
ISO 9001:2015 TRANSITIONS
Copyright 2015 MAS Solutions LLC. All Rights Reserved. 1 ISO 9001:2015 TRANSITIONS Transition Strategies Copyright 2015 MAS Solutions LLC. All Rights Reserved. 2 TRANSITION STRATEGIES Andy Warhol, Butterfly,
CERTIFICATE. AXITEC GmbH Otto-Lilienthal-Str. 5 D Böblingen ISO 9001:2008
CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that AXITEC GmbH Otto-Lilienthal-Str. 5 D-71034 Böblingen has established and applies a Quality Management System for Contract
European Technical Assessment. ETA-02/0024 of 17 June English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-02/0024 of 17 June 2016 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
European Technical Assessment. ETA-13/0651 of 18 June English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-13/0651 of 18 June 2015 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
CERTIFICATE. OSRAM GmbH Marcel-Breuer-Straße München Germany ISO 14001:2015
CERTIFICATE The Certification Body of TÜV SÜD Management Service GmbH certifies that Marcel-Breuer-Straße 6 80807 München including the sites and scope of application see enclosure has established and
Management Systems Certification Ltd
Management Systems Certification Ltd 48 South Street, New Ross, Co. Wexford Management Systems Certification Body Registration number: 5011 is accredited by the Irish National Board (INAB) to undertake
esserbus -PLus maximum security, minimum costs
esserbus -PLus maximum security, minimum costs www.novar.de The innovation The latest in ringbus technology: The esserbus -PLus supplies data, signals and power, too, for the direct operation of alarm
European Technical Assessment. ETA-15/0771 of 14 December English translation prepared by DIBt - Original version in German language
European Technical Assessment ETA-15/0771 of 14 December 2015 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
CONCRETE CORE COOLING CONCRETCOOL
CONCRETE CORE COOLING CONCRETCOOL Innovative Activation of Building Structures with CONCRETCOOL Building component activation operates in the same way as a chilled ceiling, but one that also has a large
GASTEC QA. Evaluation Guideline KE 191. Amendment A1 Excess flow valves. KE A1 March 2012
KE 191 - A1 March 2012 GASTEC QA Evaluation Guideline KE 191 Amendment A1 Excess flow valves Foreword and introduction These GASTEC QA Approval requirements amendment have been accepted by the Board of
The kit contains messages on the following products: Ball valve BR26 CERA SYSTEM and Pfeiffer Chemie-Armaturen develop innovative ball valve
PRESS KIT GERMAN ENGLISH The kit contains messages on the following products: Ball valve BR26 CERA SYSTEM and Pfeiffer Chemie-Armaturen develop innovative ball valve Conveying nozzles CERA SYSTEM scores
GASTEC QA. Evaluation Guideline KE 192. Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment
KE 192 - A1 March 2012 GASTEC QA Evaluation Guideline KE 192 Amendment A1 Rubber materials for seals and diaphragms for gas appliances and gas equipment Foreword and introduction These GASTEC QA Approval
BRL-K14026/ Evaluation Guideline. for the Kiwa product certificate for Extractable shower hoses for sanitary tapware
2017-05-12 for the Kiwa product certificate for Extractable shower hoses for sanitary tapware Preface This evaluation guideline has been accepted by the Kiwa Board of Experts Watercycle (CWK), in which
Towards a national indicator for urban green space provision and environmental inequalities in Germany: Method and findings
SFB 649 Discussion Paper 2016-022 Towards a national indicator for urban green space provision and environmental inequalities in Germany: Method and findings Henry Wüstemann* Dennis Kalisch* Jens Kolbe*
DECLARATION OF PERFORMANCE. No EN
DECLARATION OF PERFORMANCE No. 0021 EN 1. Unique identification code of the product-type: Rebar connection with fischer injection mortar FIS EM 2. Intended use/es: Product Mortar for post-installed rebar
GASTEC QA. Approval Requirements 31-2
KE 31-2 March 2012 GASTEC QA Approval Requirements 31-2 for the GASTEC QA product certificate for Sealing materials for metallic threaded joints in contact with 2nd and 3rd family gases and hot water Part
European Technical Assessment. ETA-15/0440 of 6 July English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-15/0440 of 6 July 2015 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
CERTIFICATE. with the organizational units/sites as listed in the annex QM
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Quality system management, Internal audit management,
CERTIFICATE. with the organizational units/sites as listed in the annex QM
CERTIFICATE This is to certify that with the organizational units/sites as listed in the annex has implemented and maintains a Quality Management System. : Quality system management, Internal audit management,
TFI Report Classification
TFI Report Classification of the Reaction to Fire according to EN 13501-1:2010 Customer Stuttgarter Straße 75 74321 Bietigheim-Bissingen GERMANY Product resilient floor covering Product 1: Scala 55 Connect
DECLARATION OF PERFORMANCE. DoP: 0094 for Injection System fischer FIS V (Bonded anchor for use in concrete) EN
DECLARATION OF PERFORMANCE DoP: 0094 for Injection System fischer FIS V (Bonded anchor for use in concrete) EN 1. Unique identification code of the product-type: DoP: 0094 2. Intended use/es: Post-installed
DECLARATION OF PERFORMANCE. No EN
DECLARATION OF PERFORMANCE No. 0072 EN 1. Unique identification code of the product-type: Injection System fischer FIS V 2. Intended use/es: Product Bonded anchor for use in concrete Intended use/es For
GASTEC QA. Approval Requirements 6
KE 6 March 2012 GASTEC QA Approval Requirements 6 for the GASTEC QA product certificate for Plumbing fittings with ends for capillar soldering and/or thread connections Foreword These GASTEC QA Approval
Acceptance Requirements. Fibre Optic Systems. Revised 12/2017. December 5th, Alexander Kölbel
December 5th, 2017 Acceptance Requirements Fibre Optic Systems Revised 12/2017 Alexander Kölbel +49 6190 8880-40 alexander.koelbel@datwyler.com Dätwyler Cables GmbH, Auf der Roos 4-12, 65795 Hattersheim,
Site Certification Process
(Status Quo) Frank Sonnenberg Bundesamt für Sicherheit in der Informationstechnik / Federal Office for Information Security 7th ICCC / 2006-09-19 Presentation Content Description of the Site Certification
EC CERTIFICATE OF CONFORMITY 0432 CPD 0018
EC CERTIFICATE OF CONFORMITY 0432 CPD 0018 In compliance with the Directive 89/106/EEC of the Council of European Communities of 21 December 1988 on the approximation of laws, regulations and administrative
DECLARATION OF PERFORMANCE. No EN
DECLARATION OF PERFORMANCE No. 0079 EN 1. Unique identification code of the product-type: fischer injection system FIS EM 2. Intended use/es: Product Metal anchors for use in concrete (heavyduty type)
GUIDELINE FOR THE APPLICATION OF SRPS CEN/TS WHEN GRANTING ACCREDITATION TO TESTING LABORATORIES
GUIDELINE FOR THE APPLICATION OF SRPS CEN/TS 15675 WHEN GRANTING ACCREDITATION TO TESTING LABORATORIES Any differences between the Serbian and English versions of this document are not intended, but if
European Technical Assessment. ETA-05/0069 of 3 July English translation prepared by DIBt - Original version in German language.
European Technical Assessment ETA-05/0069 of 3 July 2017 - Original version in German language General Part Technical Assessment Body issuing the European Technical Assessment: Trade name of the construction
Iso Quality Manual Giza Systems File Type
ISO 9001 2008 QUALITY MANUAL GIZA SYSTEMS FILE TYPE PDF - Are you looking for iso 9001 2008 quality manual giza systems file type Books? Now, you will be happy that at this time iso 9001 2008 quality manual
Weishaupt WKmono 80. The next-generation burner for ratings up to kw. That s reliability
Weishaupt WKmono 80 The next-generation burner for ratings up to 17 000 kw That s reliability Weishaupt WKmono 80: The next-generation monobloc burner The powerful output offered by the new WKmono 80 burner
Test Report No
TFI Charlottenburger Allee 41 52068 Aachen Germany Charlottenburger Allee 41 52068 Aachen Germany Egetaepper A/S Postfach 190 7400 Herning DÄNEMARK Fon +49.241.9679 00 Fax +49.241.9679 200 postmaster@tfi-online.de
including the locations according to annex
Certificate Certificate Holder: Siemens Factory Automation Engineering Ltd. Registration Address: No. 1, Jiuxianqiao East Rd., Chaoyang Operation Address: Building A1, No. 9, Jiuxianqiao East Rd., Chaoyang
Acoustic Verification Report
Acoustic Verification Report Invacare XPO 2 Portable Oxygen Concentrator Type XPO100B-EU for Date: 2013-12-10 Our reference: IS-ATC2-MUC/js Document: Report Invacare VR.600010074.002.12 - Revision 2.docx
CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 RECOMMENDATION FOR USE
CO-ORDINATION OF NOTIFIED BODIES PPE Regulation 2016/425 PPE-R/00.017 Version 2 RECOMMENDATION FOR USE Number of pages: 5 Approval stage : Approved on : Origin : Horizontal Committee, C2D Ad hoc group
Annex to the Accreditation Certificate D-ZE according to DIN EN ISO/IEC 17065:2013
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-ZE-12007-01-06 according to DIN EN ISO/IEC 17065:2013 Holder of certificate: TÜV NORD CERT GmbH Langemarckstraße 20, 45141 Essen
Process air cooler series DV
Process air cooler series DV With cooling circuit in air or water-cooled version Customized refrigeration technology Made in Germany 2 Lahntechnik your system partner for customized refrigeration technology
Certificate Surveillance audit
Certificate Surveillance audit The quality management System of the Company Manufacturer: R. STAHL Schaltgeräte GmbH Address: Am Bahnhof 30, 74638 Waldenburg, Germany 7 Site(s) of manufacture: R. STAHL
DECLARATION OF PERFORMANCE. DoP: 0135 for fischer injection system FIS EM Plus (Bonded anchor for use in concrete) EN
DECLARATION OF PERFORMANCE DoP: 0135 for fischer injection system FIS EM Plus (Bonded anchor for use in concrete) EN 1. Unique identification code of the product-type: DoP: 0135 2. Intended use/es: Post-installed
CERTIFICATE. about Product Conformity {QAL 1) Number of Certificate: _02
Umwelt Bundes Amt For our Environment /;;;!. TÜVRheinland Precisely Right. CERTIFICATE about Product Conformity {QAL 1) Number of Certificate: 0000026912_02 Certified AMS: Manufacturer: Test Institute:
Our Dillingen Factory. The World Leader for Brilliant Dishwashing Results BSH HAUSGERÄTE GMBH
Our Dillingen Factory The World Leader for Brilliant Dishwashing Results BSH HAUSGERÄTE GMBH Our factory in Dillingen, Bavaria, is one of the biggest, most advanced dishwasher plants in the world. Our
BRL-K629/03. Date Evaluation Guideline. for the Kiwa product certificate for. Backflow protection devices. Family E, Types A, B, C and D
BRL-K629/03 Date 01-02-2012 Evaluation Guideline for the Kiwa product certificate for Backflow protection devices Family E, Types A, B, C and D Preface Kiwa This (BRL) has been drawn up by Kiwa's Board
GASTEC QA. Approval Requirements 15. for the GASTEC QA product certificate for Steel pipes and sockets for the transport of gas. KE 15 January 2012
KE 15 January 2012 GASTEC QA Approval Requirements 15 for the GASTEC QA product certificate for Steel pipes and sockets for the transport of gas Foreword These GASTEC QA Approval requirements have been
This document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 1555-7 April 2003 ICS 23.040.01; 91.140.40 English version Plastics piping systems for the supply of gaseous fuels - Polyethylene
GASTEC QA. Approval Requirements 69-1
KE 69-1 May 2014 GASTEC QA Approval Requirements 69-1 for the GASTEC QA product certificate for Manually operated ball valves and closed bottom taper plug valves for gas installations for buildings Foreword
TDS 20 R / TDS 30 R / TDS 50 R
TDS 20 R / TDS 30 R / TDS 50 R EN OPERATING MANUAL ELECTRICAL FAN HEATER TRT-BA-TDS20R-30R-50R-TC-001-EN Table of contents Notes regarding the operating manual... 1 Safety... 1 Information about the device...
CLEANING AND CARE INSTRUCTIONS FOR FLOOR COVERINGS WITH PUR ECO SYSTEM
CLEANING AND CARE INSTRUCTIONS FOR FLOOR COVERINGS WITH PUR ECO SYSTEM Dear customer, We are pleased that you have chosen a DLW floor covering with PUR surface protection. So that you can continue to enjoy
PATIO CLEANER PPC 30 PATIO CLEANER. Translation of original operation manual
PATIO CLEANER PPC 30 PATIO CLEANER Translation of original operation manual 6 Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of the device. GB
Clino Systevo. Intelligent Life Care. Modern Patient Communication intelligently integrated
Clino Systevo Intelligent Life Care Modern Patient Communication intelligently integrated Convergence of the systems Systems such as telephony, nurse call, hazard and building management have so far been
BRL-K774/ Evaluation guideline. for the Kiwa product certificate for Compression fittings to tighten with matching clamping device
01-02-2012 Evaluation guideline for the Kiwa product certificate for Compression fittings to tighten with matching clamping device Preface This evaluation guideline has been accepted by the board of experts
GASTEC QA. Approval Requirements 31-1
KE 31-1 March 2012 GASTEC QA Approval Requirements 31-1 for the GASTEC QA product certificate for Sealing materials for metallic threaded joints in contact with 2nd and 3rd family gases and hot water Part
This document is a preview generated by EVS
TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION CEN/TS 13244-7 August 2003 ICS 93.030 English version Plastics piping systems for buried and above-ground pressure systems for water
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-11035-03-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 25.10.2017 to 24.10.2022 Holder of certificate: DMT
Who we are and what we do.
Who we are and what we do. Hagleitner Hygiene International GmbH Europes most modern production facility for innovative hygiene 1 Management 2 Factsheet 3 Products 4 High-tech at HAGLEITNER. 3 production
Wet alarm valve stations
VdS Guidelines for water extinguishing systems VdS 2100-01en Requirements and test methods VdS 2100-01en : 2011-05 (02) Publishing house: VdS Schadenverhütung GmbH Amsterdamer Str. 172-174 50735 Köln,
Annex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-12158-03-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 2018-09-19 to 2019-09-03 Date of issue: 2018-09-19
RECOMMENDATIONS FOR CLEANING AND MAINTENANCE OF DLW LINOLEUM WITH LPX FINISH
RECOMMENDATIONS FOR CLEANING AND MAINTENANCE OF DLW LINOLEUM WITH LPX FINISH Dear Customer, We are delighted that you have opted for a DLW LINOLEUM floor covering with LPX FINISH. So you can take pleasure
BRL-K602. Datum Evaluation Guideline
Datum 2018-09-04 for the Kiwa product certificate for valves, control valves and non-return valves for drinking water transport and drinking water distribution systems Preface This evaluation guideline
Retention of Conformity Following Modifications of Software at the Example of Fire Alarm Equipment Industry Requirements
ZVEI I EXPLANATORYLEAFLET 33015:2017-12 Guideline Retention of Conformity Following Modifications of Software at the Example of Fire Alarm Equipment Industry Requirements Safety and Security Division We
Transitioning to ISO 9001:2008. Profession Development for ASQ Chapter 309 Tanzco Management Consulting, LLC
Transitioning to ISO 9001:2008 Profession Development for ASQ Chapter 309 Tanzco Management Consulting, LLC ISO 9001 ISO 9001 is the most widely used standard for quality management systems in the world
Technical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme:
Technical Assessment Guideline Applicable for the Kiwa KQ Certification Scheme: Solar products and components Accreditation Kiwa Italia S.p.A. Via Treviso 32/34 31020 San Vendemiano (TV) Italia Tel: +39
HYUNDAI HEAVY INDUSTRIES CO., LTD.
Certificate No.: 52700-2009-AE-KOR-RvA Initial Certification Date: 07 March, 1997 Valid: 16 March, 2015 16 March, 2018 This is to certify that the management system of CO., LTD. 1000, Bangeojinsunhwando-ro,
fulfils all requirements for extended protection of the criteria catalogue The appendix is part of the certificate and consists of 4 pages.
The certification body of TÜV Informationstechnik GmbH hereby awards this certificate to the company Beiersdorf Shared Services GmbH Quickbornstraße 24 20253 Hamburg, Germany to confirm that its security
THE MYSORE UNIT OF RPG CABLES MANUFACTURES A RANGE OF INSTRUMENTATION CABLES
THE MYSORE UNIT OF RPG CABLES MANUFACTURES A RANGE OF INSTRUMENTATION CABLES The Mysore Unit of RPG Cables is the largest and most diversified cables manufacturing facility in the South of India. The unit
from ENGINEERING up to the complete PLANT, ALL from a single SOURCE MULTI Kühlsysteme GmbH Zschorlauer Straße Aue/Saxony GERMANY
from ENGINEERING up to the complete PLANT, ALL from a single SOURCE Location Company building Multi Kühlsysteme GmbH Zschorlauer Strasse 56 D-08280 Aue / Saxony GERMANY Phone: + 49 3771 24 67 0 Telefax:
Vapor Condensers Schwakos
Vapor Condensers Schwakos Water or air-cooled with or without cooling circuit Customized refrigeration technology Made in Germany 2 Vapor condensers Lahntechnik your system partner for customized refrigeration
Cool Air for your Server Rooms Protect your investment and reduce your costs
Quality of air means quality of life Picture courtesy of obs/strato AG Cool Air for your Server Rooms Protect your investment and reduce your costs HANSA is a member of the manufacturer association RLT
IQ8Quad. The highlight of every fire detection scenario. Fire detection technology
IQ8Quad The highlight of every fire detection scenario Fire detection technology 2 3 Safety is the result of efficiency and innovation l This applies to fire alarm systems too, as especially in this case,
FACTBOOK 2015/2016. Q3/9M + Trading Statement
FACTBOOK 2015/2016 Q3/9M + Trading Statement Page 1 HORNBACH Holding Group A leading European DIY retailer 1877 Foundation 1968 1st DIY store with garden center 1980 1st DIY megastore 1987 Going public
CEN standardization work on refrigerating systems, especially standard EN 378
CEN standardization work on refrigerating systems, especially standard EN 378 Carsten Hoch Head of Refrigeration TÜV SÜD Industrie Service GmbH Ridlerstrasse 65, 80339 Munich carsten.hoch@tuev-sued.de
StandCert d.o.o. ~ Bulevar vojvode Misica 39a, Belgrade, Serbia AKP~:;;BAHO CEPT~cI>HKAl\~OHO. issues. Certificate. No. QS-OOOl
~ Bulevar vojvode Misica 39a, Belgrade, Serbia AKP~:;;BAHO CEPT~cI>HKAl\~OHO StandCert d.o.o. ATC StandCert TEIIO issues S$lPS ISO/l[( 11021:2011 Certificate No. QS-OOOl which confirms that organization
Guide to CE marking for solid surface wash basins as per product standard DIN EN 14688
Technical Bulletin 05 Guide to CE marking for solid surface wash basins as per product standard DIN EN 14688 Preface This guide to CE marking for solid surface wash basins is of interest to manufacturers,
SUN CLOCK In structions Manual
SUN CLOCK In structions Manual INTRODUCTION Congratulations on purchasing this state-of-the-art Sun Clock as an example of superior design and engineering. Providing radio-controlled time, calendar, indoor
BRL-K21030/02 5 August Certification of Alarm Communication. Certification Alarm Transmission Systems (ATS) Alarm Transmission Systems
5 August 2014 Certification of Alarm Communication Certification (ATS) Kiwa N.V. - 1-5 Augustus 2014 Preface This Evaluation Guideline (Certification Scheme) has been accepted by the Kiwa Board of Experts
GASTEC QA. Approval Requirements 200. for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE)
KE 200 March 2012 GASTEC QA Approval Requirements 200 for the GASTEC QA product certificate for fusion fittings and saddles made from Polyethylene (PE) Foreword These GASTEC QA Approval requirements have
BRL-K618/ Evaluation Guideline. for the Kiwa product certificate for Water meters
/08 2018-01-15 for the Kiwa product certificate for Water meters Preface This evaluation guideline has been accepted by the Kiwa Board of Experts Watercycle (CWK), in which all relevant parties in the
ISO Anti-bribery Management Systems and Vehicle Inspections in the Slovak Republic
CITA WG3 Standardized Inspection Outcomes 4 th April 2018, TESTEK, a.s., Bratislava ISO 37000 Anti-bribery Management Systems and Vehicle Inspections in the Slovak Republic Ing. Marián Rybianský (TESTEK)
DOWNLOAD OR READ : ISO 9001 CONTROL OF DOCUMENTS PDF EBOOK EPUB MOBI
DOWNLOAD OR READ : ISO 9001 CONTROL OF DOCUMENTS PDF EBOOK EPUB MOBI Page 1 Page 2 iso 9001 control of documents iso 9001 control of pdf iso 9001 control of documents ISO 9001:2015 sets out the criteria
REMOTE VERIFICATION OF THE CARBON FOOTPRINT CALCULATION TOOL OF MAESPA FOR REFERENCE PRODUCTS
REMOTE VERIFICATION OF THE CARBON FOOTPRINT CALCULATION TOOL OF MAESPA FOR REFERENCE PRODUCTS RECOMMENDATIONS REPORT BUREAU VERITAS CERTIFICATION JULY 2015 Remote Verification of the carbon footprint calculation
Processing (cleaning, disinfection and sterilization) of instruments from Smith & Nephew Orthopaedics AG
Guide Processing (cleaning, disinfection and sterilization) of instruments from Smith & Nephew Orthopaedics AG Acceptance Cleaning, Disinfection Inspection, Packing Use T Sterilization t Storage Return
Descendants of August Hechinger 1 and Elisabeth Schick
Descendants of August Hechinger 1 and Elisabeth Schick August Hechinger 1 b. 14 Jul 1811, Kuhbach, Baden, Germany m. Elisabeth Schick, 1837, Kuhbach, Baden, Germany d. 29 Aug 1866, Kuhbach, Baden, Germany
GASTEC QA. Approval Requirements 136
KE 136 January 2012 GASTEC QA Approval Requirements 136 for the GASTEC QA product certificate for Polyethylene (PE) valves for plastic piping systems for the supply of gaseous fuels Foreword These GASTEC
Guidelines. Safety Integrity Level - SIL - Valves and valve actuators. February Valves
Valves Guidelines Safety Integrity Level - SIL - Valves and valve actuators February 2009 VDMA German Engineering Federation Valves Manufacturers Association Chairman: Prof.-Dr.-Ing. Heinfried Hoffmann
Quick Start Guide , Rev. BB February Rosemount 1495 Orifice Plate Rosemount 1496 Orifice Flange Union
00825-0100-4792, Rev. BB Rosemount 1495 Orifice Plate Rosemount 1496 Orifice Flange Union NOTICE This installation guide provides basic guidelines for Rosemount 1495 Conditioning Orifice Plate. It does
SPECIALIST FOR HEAT-EXCHANGER, FIN TUBES AND BOILER CLEANING SYSTEMS
Rosink-Werkstätten GmbH SPECIALIST FOR HEAT-EXCHANGER, FIN TUBES AND BOILER CLEANING SYSTEMS Rosink-Werkstätten GmbH Product and Service Portfolio In the field of heat recovery Rosink-Werkstätten products
The urban dimension in European Cohesion Policy
The urban dimension in European Cohesion Policy 2007-2013 Corinne Hermant-de Callataÿ Directorate General Regional Policy Urban actions METREX 10th Anniversary Conference The urban dimension in European
Press kit. Hagleitner Hygiene International GmbH - Europes most modern production facility for innovative hygiene 1. Management 2.
Press kit Hagleitner Hygiene International GmbH - Europes most modern production facility for innovative hygiene 1 Management 2 Factsheet 3 Products 4 High-tech at Hagleitner. 3 production facilities 5