BASELIFT 6200 Wall Mounted Worktop Lift

Transcription

1 BASELIFT 6200 Wall Mounted Worktop Lift

2

3 BASELIFT 6200 Wall Mounted Worktop Lift

4 PLANNING Baselift gives everybody the chance to work in the kitchen! In a standard kitchen there are several obstacles that make it difficult for the chairbound user to prepare their own food. The difficulties include the fact that the worktop is too high and that it is hard to get close to the sink unit, work surfaces and cooker. Problems in a standard kitchen: This sketch shows the problem when you are sitting in a wheelchair right in front of a worktop: The solution - Sitting: Knee space is required below the worktop to make it satisfactory: The solution - Standing: Adjustable height is required when the worktop is to be used by both sitting and standing users: The top is too high and the floor units make it difficult to get up close. To reach the kitchen work surface you have to sit parallel to the units, which puts a strain on back and shoulders. Baselift provides knee space and the option of sitting below the work surface. Furthermore, the user can adjust the height of the work surface to give excellent accessibility. Baselift can be adjusted vertically to a level that is comfortable for standing work too. Which functions are needed in the kitchen? Baselift is a flexible solution that is manufactured according to your needs. The work surface can be equipped with a sink unit and cooker. Either in separate modules or as a combination module. It can be advantageous to divide up sink unit and cooker in separate units if sitting and standing work is going to be undertaken at the same time. 4 The lift is available in widths from 59 cm to 340 cm and can also be supplied in three different corner solutions.

5 PLANNING The kitchen's workplaces In the kitchen it should be possible to wash, prepare and cook food, and subsequently be able to wash up utensils and crockery. The kitchen is divided up into three areas so that the tasks can be carried out. Washing-up area: The space should be located adjacent to the preparation area to facilitate washing of foodstuffs. There should be also be a space to put things on the side that is not adjacent to the preparation area. Preparation area: This is where food is prepared, sliced and processed. The area should be located between washing-up area and cooking area in order to concentrate the workplaces. The space between washingup area and preparation area should be at least 80 cm. Washing-up area Preparation area ooking area ooking area: The area should be located adjacent to the preparation area. There should be also be a space to put things on the side that is not adjacent to the preparation area. Recommended dimensions for the kitchen's workplaces 40,0 80,0 60,0 A space should be available to put saucepans beside the cooker. There should be a preparation area of at least 80.0 cm between washing-up sinks and cooker. There should be a space beside the washing-up sinks. This is particularly important if the kitchen is not equipped with a dishwasher, as there then has to be room for a draining board. General information on dimensions Manual wheelchair Electric wheelchair Recommended dimensions from dining table to kitchen fittings 120,0 130,0 70,0 70,0 140,0 Turn around Manual wheelchair 130,0 Turn around Electric wheelchair 150,0 140,0 Sources: Bygg ikapp handikapp (Building to overcome disability) - Svensk byggtjänst och Hjälpmedelsinstitutet, Building Design Residences Internal Dimensions - SIS Svensk standard SS :2006 5

6 Baselift 6200 Wall Mounted Worktop Lift BASELIFT 6200 is a wall mounted worktop lift with great flexibility to be adapted for different needs. The equipment in the work surface is selected according to the function desired. Sink unit, hob, drawers, chopping boards etc. can be integrated in the work surface. The lift can be used separately or together with Granberg's wall cabinet lift to totally adapt the kitchen. Space is left open below the work surface for knees and legs. Installations below the work surface, (motors, water, drainage), can be concealed by telescopic cover plates that give the kitchen an attractive appearance. The motors are continuously adjustable and move the work surface quickly and silently to the required height. The lift is equipped with a reliable safety system that guarantees safe operation with no risk of crushing cm / Sec cm cm excl. top board kg kg ) Drawers and chopping boards can be integrated in the worktop. 2) Rear edge trim prevents objects falling down behind the lift. 3) Sink unit with shallow sinks can be integrated in the worktop. 4) Fronts enclose washing-up sinks and produce an attractive facade. 5) over plates conceals hoses and other installations. 6) The frame depth is adjustable cm to fit adjoining cupboards. 7) The motors can be moved laterally, providing great flexibility in installation. 8) The work surface is assembled on delivery. The sides are pre-assembled and laterally adjustable to fit the sink unit, hob, drawers and chopping boards. 9) 10 cm free space below mot ors for electrical installation and pipes. 10) The work surface is adjustable at an angle to compensate for inclined walls. 11) Safety switch that guarantees safe operation with no risk of crushing. 6

7 MODELS Baselift 6200 Model 6200 Worktop lift intended for installation on a straight wall. Model 6201 Worktop lift intended for installation in 90 o corner. Oblique front edge, 45 o. Model 6202 Worktop lift intended for installation in 45 o corner. Oblique front edge, 45 o. Model 6203 Worktop lift intended for installation in 90 o corner. 7

8 8 SMART FEATURES Baselift 6200

9 SMART FEATURES Baselift 6200 Drawers for cutlery and other kitchen utensils can be integrated in the work surface. ombination of drawer and chopping board provides a practical surface, at the same time as the area below the chopping board can be used for storage. Easy to manage control buttons integrated in the front. Buttons for wall cabinet lift and worktop lift are collected in a single frame. Safety lock with key prevents illicit operation. Power points can be integrated in the front so that they are easily accessible from a sitting position. A hob can be integrated in the worktop. Shallow washing-up sinks can be recessed into the work surface. The front edge is hidden by the front. As an alternative to recessed washingup sinks, a complete sink unit can be installed. over plates below the work surface conceals hoses and other installations. 9

10 ORDERING INFORMATION Baselift 6200 Baselift 6200 Lift unit cm width 1 motor Safety switch Width (cm)* Art. no Baselift 6200 Lift unit cm width 2 motors 2 mid-sides Safety switch Baselift 6200 Lift unit cm width 2 motors 3 mid-sides Safety switch Baselift 6200 Lift unit cm width 3 motors 4 mid-sides Safety switch * Add 1 cm for planning width. (The lift's width space for movement).

11 ORDERING INFORMATION Baselift 6200 Baselift orner 6201 Lift unit cm width 1 motor cm 2 motors cm Safety switch Width (cm)* Front () Art. no ,0 Example of complete Baselift orner x cm: 1 x Baselift orner 6201, width cm ( ) 1 x Baselift orner 6201, width cm ( ) ,0 B = Sides (act as brackets for drawers) B = Free space for optional accessories. E.g. hob, sink unit, drawers. (40.0 cm in the example) Baselift orner Lift unit cm width 1 motor cm 2 motors cm Safety switch ,0 Example of complete Baselift orner x cm: 1 x Baselift orner 6202, width cm ( ) 1 x Baselift orner 6202, width cm ( ) ,0 B B = Sides (act as brackets for drawers) = Free space for optional accessories. E.g. hob, sink unit, drawers. (40.0 cm in the example) Baselift orner Lift unit cm width 1 motor cm 2 motors cm Safety switch ,0 Example of complete Baselift orner x 90.0 cm: 1 x Baselift orner 6203, width cm ( ) 1 x Baselift orner 6203, width 90.0 cm ( ) ,0 B = Sides (act as brackets for drawers) B = Free space for optional accessories. E.g. hob, sink unit, drawers. (40.0 cm in the example) * Add 1 cm for planning width. (The lift's width space for movement). 11

12 ORDERING INFORMATION Baselift 6200 Basic option ontrol button in Alu-design orded, for recessing Dimensions: 8.2 x 8.2 x 1.7 cm Optional extras Drawer with full extension and damping Depth: 42.0 cm, height: 8.5 cm 30.0 cm cm cm ontrol button, Touch Mini 60.0 cm orded, self-adhesive Dimensions: 5.0 x 2.0 x 0.2 cm ontrol button, white orded, for recessing Dimensions: 8.0 x 8.0 x 1.5 cm Drawer and chopping board Drawer made of steel plate in Alu-Design. hopping board in beech incl. front in Alu-Design. Height: 5.5 cm (drawer) 40.0 cm utlery tray Radio control - Hand control Fits 30.0 cm wide drawer Dimensions: 3.8 x 11.0 x 1.0 cm For one lift For two lifts Fits 40.0 cm wide drawer Fits 50.0 cm wide drawer Fits 60.0 cm wide drawer Remote control for 1 lift Optional extras Remote control for 2-5 lifts For three lifts For four lifts Multi-compartment frame, ALU-Design ombines power point, switch or control buttons in ALU-Design. Two compartments: 15.3x8.2x0.9 cm Three compartments: 22.5x8.2x0.9 cm Multi-compartment frame, white ombines white power point and control buttons. Two compartments: 15.3x8.0x0.9 cm Three compartments: 22.3x8.0x0.9 cm chopping board) Security strip Used if a security strip is required on end, (at open side). Lenght: 37.0 cm Height: 2.5 cm Replacement Security strip (per metre) End Safety Stop Strip left hand L End Safety Stop Strip right hand R orner connection package Protective plate below worktop lift Provides a smooth underside. Used below hob cm cm cm cm Switch, ALU-Design For lighting etc. The button has a display for individual marking. Dimensions: 8.2 x 8.2 x 1.7 cm Rear edge trim ALU for worktop Mounted behind worktop. Brushed Aluminum Height over worktop: 2.0 cm Thickness behind worktop: 0.3 cm (per metre) Safety lock Prevents illicit operation. Dimensions: 2.3 x 0.9 cm Fronts, white For drawers or fixed installation. Height: 11.8 cm 19.6 cm cm cm cm cm cm cm cm cm cm cm cm cm cm Front in special width 380-XXX Front for drawer with chopping board. Height: 8.6 cm 39.6 cm

13 ORDERING INFORMATION Baselift 6200 Optional extras over plates Used to cover installations below the work surface. For Baselift 6200: cm For Baselift 6200: cm Set required per side For Baselift 6201: cm For Baselift 6202: cm For Baselift 6203: cm Fitting kit for cover plates Used to mount plates to cover installations below the work surface. For Baselift 6200: cm For Baselift 6200: cm Set required per side For Baselift For Baselift For Baselift Side guard for cover plates Used to enclose the side between wall and cover plate when the work surface has an open side. (Fits 1.2 cm thick plates, 1 per side). Alu-Design Motor hood Mounted on the motor to provide an attractive surround when cover plates are not used. Sold per piece Width: 20.0 cm, Depth: 14.0 cm White plastic Alu-grey plastic Optional extras Granberg mixer tap - long lever Incl. dishwasher shut off Lever length, 23.0 cm Tap height, 29.0 cm Tap projection, 28.0 cm Granberg mixer tap - extendible hand shower Incl. dishwasher shut off Lever length, 9.0 cm Tap height, 21.0 cm Tap projection, 20.0 cm Flexible water hoses 2-pack In combination with the worktop water supply Length, 80.0 cm, connection R15 (1/2 ) Flexible drain hose In combination with the worktop drainage connection. Diameter for connection, 5.0 cm or 4.0 cm (when cutting) Length: cm Built-in sink, single With level control A: 44.1 cm, B: 49.6 cm Hose guard Mounted optionally below the worktop (beside motors) to provide an attractive surround for hoses when cover plates are not used. Fittings included. Width: 41.0 cm, Depth: 20.0 cm White plastic Alu-grey plastic Dimensions, sink: Depth, 11.0 cm () D: 34.0 cm, E: 40.0 cm Recess in worktop: 37.0 x 43.0 cm Recessed sink unit 76.0 cm, 2 sinks A: 76.6 cm, B: 49.6 cm 61876V Stroke limiter Used to limit vertical adjustment after installation. Start set (Programming box memory adapter) Dimensions, sink: Depth: 11.0 cm () 1 x 29.3 (D) x 40.0 cm (F) 1 x 34.0 (E) x 40.0 cm (F) Recess in worktop: 74.0 x 47.0 cm D A E F B Memory adapter (If you already have a programming box) incl. rubbish separation The cupboard is opened by pulling out the door. Bottom with rubbish container comes out as well. Rubbish containers supplied: 2 x 12 lit Dimensions, sink: Depth: 11.0 cm () 1 x 34.0 (D) x 40.0 cm (G) 1 x 16.0 (E) x 29.5 cm (F) Recess in worktop: 59.0 x 47.0 cm Recessed sink unit 61.6 cm, 2 sinks Left - A: 61.6 cm, B: 49.6 cm Right - A: 61.6 cm, B: 49.6 cm E A D F G B Right 61861V 61861H W x D x H: 40.0 x 48.8 x 54.3 cm White top, white door A D E with 2 drawers The drawers aresmooth running and have room for large containers. B G F Left Recessed sink unit 97.1 cm, 2 sinks W x D x H: 40.0 x 48.8 x 54.3 cm White top, white fronts with 3 drawers The drawers are smooth running and have room for cutlery and other small items. 1 x cutlery tray supplied. Dimensions, sink: Depth: 11.0 cm () 1 x 34.0 (D) x 40.0 cm (G) 1 x 16.0 (E) x 29.5 cm (F) Recess in worktop: 94.5 x 47.0 cm Left - A: 97.1 cm, B: 49.6 cm Right - A: 97.1 cm, B: 49.6 cm H D A E A E D H F G B Right 61896V 61896H W x D x H: 40.0 x 48.8 x 54.3 cm White top, white fronts B G F Left 13

14 TEHNIAL INFORMATION Baselift 6200 Installation: Wall Adjustability: Motor-driven, continuously adjustable 30.0 cm ( cm excl. worktop) Speed: 1.5 cm / sec. Operation: Built-in button or radio control Safety: A security strip is located below the worktop s front edge. ontact with the strip stops the lift Electrical connection: Mains UK plug for 230 V, max 2.5A onnection of water and drainage: Max. load: 100 kg Encapsulation class: IP 20 Frame depth: cm from wall Front height: cm Dimensions cover plates: Width = Lift s width, Height 43.8 cm, Thickness cm Depth worktop: Width (model 6200): cm Width (model 6201): cm Width (model 6202): cm Width (model 6203): cm Space laterally to wall / adjoining cupboard: 0.5 cm Space to wall (for tiles): 1.5 cm Tiling: Delivery modules: Assembled work surface incl. safety switch. Wall mounted motors. Fittings supplied: Attachments for fronts Material: Frame in aluminium. Powder coated sheet-metal parts (Alu-grey RAL 9006), black motors DIMENSIONS (cm) Dimensions worktop - Model 6200 Dimensions worktop - Model Mid-sides 3.8 cm (can be moved laterally) 58.5* 58.5 * 13.0* Lift s width * Relates to 60.0 cm depth of adjoining worktop (This gives a 1.5 cm space for tiles and movement) * Incl. security strip. * Relates to 60.0 cm depth of adjoining worktop (This gives a 1.5 cm space for tiles and movement) Dimensions worktop - Model 6202 Dimensions worktop - Model Wall dimensions * 58.5* Min * * Relates to 60.0 cm depth of adjoining worktop (This gives a 1.5 cm space for tiles and movement) * Relates to 60.0 cm depth of adjoining worktop (This gives a 1.5 cm space for tiles and movement) 14 Detailed assembly instructions can be downloaded at

15 Five decades have passed since the Granberg brothers joinery workshop built the first specially designed kitchen for the disabled. We now view our task in a broader perspective. It involves making day-to-day duties simpler and more convenient for everyone. By developing, manufacturing and supplying innovative comfort features for kitchens and bathrooms, we have achieved world leadership - but still with our feet firmly on the ground, and with the determination to become involved in your particular needs and requirements. Attention to quality has been an important part of our brand ever since Otto Granberg founded our company back in As a family business we are proud of the kitchens we create. We therefore only supply quality products that we know well and with which we have been working for many years. This applies to both our own products and to those that we offer through subsuppliers. We always provide a 2 year warranty for our lift systems to make our customers feel even more secure about their ErgoKitchen. Granberg reserves the right to make changes to the design and style. olour deviations from the catalogue may occur. Granberg reserves the right to alter its product range. Design and production of catalogue: Granberg Interior AB

16 Granberg Interior AB Box Norrköping Sweden Tel: 46 (0) Fax: 46 (0) Internet: Independent 4 Life Limited The Old offee Shop 277 Fawcett Road, Southsea, Hampshire, PO4 0LB United Kingdom Tel: Fax: info@independent4life.co.uk Internet: BASELIFT