John Wilkie Paper Mill Services Ltd

Size: px

Start display at page:

Download "John Wilkie Paper Mill Services Ltd"

Gyles Logan
6 years ago
Views:

Knauf Danogips GmbH Inland Kartongbruk Inland Kartongbruk is located at Lilla Edet in Sweden, north of Gothenburg. The nearest airports are Gothenburg. Maps are available showing the mill location.

The mill is well documented with all manuals, drawings etc available. The mill voltage is mostly 400v 3phase and 50 cycles. Power used 5.5 to 6MW.

1 Knauf Danogips GmbH Inland Kartongbruk Inland Kartongbruk is located at Lilla Edet in Sweden, north of Gothenburg. The nearest airports are Gothenburg. Maps are available showing the mill location. The mill is located next to a major seaway and the nearest container port is Gothenburg. Maps are available showing mill location and local hotel details. The mill is well documented with all manuals, drawings etc available. The mill voltage is mostly 400v 3phase and 50 cycles. Power used 5.5 to 6MW. BOARD MACHINE The machine is all on one level with partial basement. The machine has a sectional drive on the right from the wet end. The machine has two overhead cranes for maintenance. The machine is well maintained and this can be seen during inspection. DCS system by ABB installed in 2010/11. Type xa The paper machine and stock preparation systems are integrated. Machine drive ABB, year approximately 2008/9. All HT panels etc. are of recent manufacture by ABB. John Wilkie Paper Mill Services Ltd 1

width 2650 mm. Total paperboard length 76 m.

2 Production volume 2011: 62,000 ton. Installed production capacity: 70,000 ton Reel up width 2650 mm. Total paperboard length 76 m. Bearing center width: 3360 mm except two dryer sections: 3500 mm. Normal paperboard machine operating speed: 160 gsm brown board 420 m/min 10.7 t/h 190 gsm plasterboard liner 350 m/min 10.6 t/h 240 gsm brown board 260 m/min 10.0 t/h 300 gsm brown board 180 m/min 8.8 t/h Paperboard grade produced; Plasterboard liner gsm Core board gsm John Wilkie Paper Mill Services Ltd 2

3 STOCK PREPARATION The stock preparation system has an ABB DCS 800 xa system and is also covered by camera control. John Wilkie Paper Mill Services Ltd 3

4 PULP LINES OCC LINE Single conveyor with truck loading. Inline metal wire de wiring unit with compactor for wire removed. Conveyor on load cells. John Wilkie Paper Mill Services Ltd 4

Voith HD C32 High consistency pulper with gearbox drive

Capacity 252 ton BD/24 h, batch time 10 + 10 min Power

Rejects to trommel drum with perforated plate.

5 Voith HD C32 High consistency pulper with gearbox drive Useful pulper: volume 32 m3. Capacity 252 ton BD/24 h, batch time min Power requirement 455 kw. Installed power capacity 560 kw. Rejects to trommel drum with perforated plate. Stock preparation reject handled by conveyor with metal detector. Fiberizer F4-P. BP. 2 Finckh ICHO Screen II HS 8 t/h Secondary LC pulper: Grubbens 12 SR Maule GR-III/L. Power requirement 450Kw John Wilkie Paper Mill Services Ltd 5

6 TOP SURFACE LINE Voith VS 20 low consistency pulper. Pulper volume: 20 m3 Power requirement: 160 Kw Coarse screen Turbo 2 ATS 10, Fine screen Moduscreen F1F, Secondary Moduscreen F0. John Wilkie Paper Mill Services Ltd 6

Cellwood disperger Krima KSR 550 SL/ 55kW screw press/

water system: model Roto Sieve Finckh Fractionator:

7 Cellwood disperger Krima KSR 550 SL/ 55kW screw press/ Krima KD kw 3t/h Twin waste discharge points externally. Screw compactor for de watering rejects prior to external discharge. In line rotary screen for removal of plastic waste in water system: model Roto Sieve Finckh Fractionator: Refiner OCC. 2 Jyhlavara JC 01. Power requirement 250 kw Refiner Top surface line ÖMV KK1 Power requirement 315 kw Storage tank OCC 500 m3 John Wilkie Paper Mill Services Ltd 7

White water screen Moduscreen 1F1 Colour kitchen with addition pumps WET END FORMING SECTION 5 Black Clawson Newport

2950mm face, Frames are stainless steel and each former can be cantilevered to make changing of felts.

Individual stock approach to each former comprising stainless Valmet pressure screens and a Valmet reject pressure

Centre formers 85to 100gsm Dilution control by an Octopus unit located in the basement for two formers.

8 White water screen Moduscreen 1F1 Colour kitchen with addition pumps WET END FORMING SECTION 5 Black Clawson Newport underfelt formers. 2950mm face, Frames are stainless steel and each former can be cantilevered to make changing of felts. Two spare forming rolls for the formers. Individual stock approach to each former comprising stainless Valmet pressure screens and a Valmet reject pressure screen. Formers have fan assistance. Each former 25to75gsm range. Centre formers 85to 100gsm Dilution control by an Octopus unit located in the basement for two formers. Machine screen Moduscreen HB2, Secondary Moduscreen F0. Forming width 2850 mm, Reel up width 2650 mm. Unloaded suction press UMV. Steambox Devronizer D5A/10F Under machine pulper with single side mounted rotor, taking edge trim from machine and breaks. Wet End pulper: Grubbens pulper for rewinder trim and machine broke complete with Voith 1 E deflaker. John Wilkie Paper Mill Services Ltd 8

PRESS SECTION 1st suction press: Voith 2nd and 3rd press: plain Presses.

pressure 60 kn/m Linear pressure 60 kn/m Linear pressure 110 kn/m Linear

First and second section dryers have open gear drives with a mixture of

15 Cylinders: face width 2930 mm, diameter 1500 mm.

9 PRESS SECTION 1st suction press: Voith 2nd and 3rd press: plain Presses. 4th press: hot press, Tamsec UMV 5th press: hot press, Tamsec UMV Linear pressure 60 kn/m Linear pressure 60 kn/m Linear pressure 110 kn/m Linear pressure 110 kn/m DRYING SECTION 4 Cylinders: face width 2955 mm, diameter 1250 mm, operating 2.5 bar. 9 Cylinders: face width 2955mm, diameter 1500 mm,operating 4.5bar. First and second section dryers have open gear drives with a mixture of Polypemco and cast iron gears. 15 Cylinders: face width 2930 mm, diameter 1500 mm. Overmechanica manufacture with silent drives, operating at 10 bar. 8 Cylinders: face width 2900 mm, diameter 1500 mm, operating at 5 bar. Pocket ventilation hood and heat recovery: Langbein & Engelbracht. John Wilkie Paper Mill Services Ltd 9

All dryers on A/F bearings, some sections are with oil

Dryers have auto guide units and manual felt

Fully enclosed dryer hood with front opening panels.

Normal 90 kn/m ABB Scanning frame: Smart Platform 700.

10 All dryers on A/F bearings, some sections are with oil auto lub systems. Felt rolls with remote greasing. Dryers have auto guide units and manual felt tensioning by pneumatic operation. Fully enclosed dryer hood with front opening panels. IR-dryer: Compac Kuster soft calender. Normal 90 kn/m ABB Scanning frame: Smart Platform 700. Pope reel: Bruderhaus with spare drum and gear arms available. John Wilkie Paper Mill Services Ltd 10

Located at wet end of the machine is the broke pulper: LC operation with a stand to take rolls to be repulped. This unit has in line a Voith model 1E deflaker to assist with pulp disintegration.

Hydraulic brake water cooled and including a brake generator. 5 slitters: manual set. Unwind diameter 2200mm and rewind diameter up to 2000mm. Shaftless rewind with roll ejector and lowering table.

11 Located at wet end of the machine is the broke pulper: LC operation with a stand to take rolls to be repulped. This unit has in line a Voith model 1E deflaker to assist with pulp disintegration. Roll truck for moving rolls from paper machine to rewinder. REWINDER Bruderhaus RS553/ Number RS 576, year 1974, drive on left from the unwind. Hydraulic brake water cooled and including a brake generator. 5 slitters: manual set. Unwind diameter 2200mm and rewind diameter up to 2000mm. Shaftless rewind with roll ejector and lowering table. Power controlled double drum drive: ABB. Rider roll control: ABB Maximal operating speed: 1,000 m/min Tambour reel oscillation. Floor mounted reel stop. Winder has its own crane frame for loading rolls onto unwind stand. Rewinder trim is blown to pulper located opposite the formers. At front side of machine in recess is a vacuum cleaner and high pressure washer. John Wilkie Paper Mill Services Ltd 11

12 FINISHING Core link semi automatic core cutter Dust collection unit with bag for core cutter Paper wrap roll frame with paper roll wrapping station complete with crane for loading paper wrapping rolls. Work bench with vice for knife changing etc. Floor mounted scale LED for weighing finished rolls. In the area are spare paper machine rolls and a stand with reel shells. BASEMENT Vacuum pumps: Nash and Katachi Hydraulic unit for press sections. Hydraulic unit for Nipco calendar Oil tanks for cylinder lubrication systems. Condensate collection tanks Eight vacuum pumps with V belt drive complete with silencers. Multi stage high pressure pumps for showers Sump pump for water removal. Various stock and water pumps Black Clawson screen Two water filters painted green: Broderna manufacture Four small stainless in - line filters Two manual hydraulic cranes: pull type, painted blue Waste container painted blue Two Voith model 2E deflakers Pulpers Grubbens two off for former/press section broke and dry end broke. John Wilkie Paper Mill Services Ltd 12

13 LABORATORY Auto Lab installed Sample strip cutter. Air porosity Gurley, surface smoothness Bendtsen, moisture, tensile strength L/T, substance. Printer, PC and spare. Shopper Reigler freeness tester Sheet maker Sheet press Oven Pan balance Quadrant gsm scales Tear tester Thickness tester Tensile tester Gurley Pan balance Fold tester Scott plybond tester Venticell unit Tear tester Electric burst tester Hydraulic press Smoothness and porosity tester John Wilkie Paper Mill Services Ltd 13

14 VACUUM PUMPS SPARE 1 Nash CL Nash CL Kakati KVM 300 ( like Nash 2002) Spare silencer for vacuum pumps, stainless steel on pallet In store a Stainless Finch screen model Type Finckh HICHO Screen II HS Fitted basket 1,4 mm, basket, rotor and mechanical sealing in spare. ELECTRICAL WORKSHOP AND OTHER SMALL WORKSHOPS Hydraulic lift table Work benches with small tools drills, vices etc. Overhead mono rail crane Hydraulic testing unit Sump pump Hydraulic lift table Blue portable bins Instrumentation store New flowmeters New consistency transmitters: ABB manufacture Inventory forthcoming. Range of small motors approx 1 to 3 kw capacity Rear of paper machine Transformer located at rear of paper machine. Three oil filled units, ABB 1600KVA 400v, ASEA 1600 KVA 400v and ASEA 1250 KVA 400v. John Wilkie Paper Mill Services Ltd 14

tanks: one for Bentonite and other for starch. OLD BOILER HOUSE Electric boiler: make K.V. Myhre AS, 8000 KW, 10,000 volts, 21 bar pressure, volume 16.2 m³ and year 1985.

15 One resin encased unit. Tanks external EXTERNAL Spare rolls in crates: PMC Mould for former on support frame Screw for Maule dispersor Old boiler house chimney Located next to office: Two blue insulated tanks: one for Bentonite and other for starch. OLD BOILER HOUSE Electric boiler: make K.V. Myhre AS, 8000 KW, 10,000 volts, 21 bar pressure, volume 16.2 m³ and year Boiler no longer in use: Eckrohr manufacture with twin burners. Steam accumulator tanks. Four inline water filters. Individual Favallesa floor pick up shaftless unwind stand width 2000mm and diameter 2000mm. Brakes are Witchata, disc air cooled and with tension control. Year 1993, type PBF 183/6 number John Wilkie Paper Mill Services Ltd 15

BOILER HOUSE IN USE Dynaflow sand filter in stainless self cleaning Two stainless self cleaning filters VEA boiler with twin burners type SAKKE burning gas.

Transformers in stock prep ASEA 1000KVA, 400v two off Transformer Effluent plant GBE 630 KVA 420 v SMALL MACHINE SHOP AND METAL STORAGE 40 foot container with end

16 BOILER HOUSE IN USE Dynaflow sand filter in stainless self cleaning Two stainless self cleaning filters VEA boiler with twin burners type SAKKE burning gas. Oil option. Specification is 19,660 kw, year 2005, operating 17 bar pressure and test pressure 25 bar. Oil storage tank external. Transformers in stock prep ASEA 1000KVA, 400v two off Transformer Effluent plant GBE 630 KVA 420 v SMALL MACHINE SHOP AND METAL STORAGE 40 foot container with end door for storage of stainless steel Rack for carbon steel storage Boxes for AFT screen baskets Three Marko waste buckets blue URSVIKEN metal guillotine type C-SD-5 4/368 John Wilkie Paper Mill Services Ltd 16

17 Spare rotor and perforated bedplate for pulper Bench vice in welding shop Two electric welding sets Anvil Electric hacksaw Chain block sets Three bench vices Sets of skates Sheet bender Two disc grinder Vertical metal cutter Maza lathe (green) with bed approx 1.5 mtrs Vertical drill Planner Horizontal metal table with light FSA surface grinder MECA vertical hydraulic press Twin disc grinder Pipe threading unit Industrial cleaner Small belt grinder John Wilkie Paper Mill Services Ltd 17

EFFLUENT PLANT AT BASE OF MILL The effluent plant is

Settler tank followed by an aeration tank.

Three blowers Delta screw units in cabinets.

18 EFFLUENT PLANT AT BASE OF MILL The effluent plant is a concrete construction with tanks made from sectional concrete. The culture is attached to floating plastic membranes. Settler tank followed by an aeration tank. In line PH alarm tester with auto shut down. Three blowers Delta screw units in cabinets. Recent manufacture. Polymer make up unit. Effluent plant next to stock prep area. John Wilkie Paper Mill Services Ltd 18

CONCRETE BUILDING WITH BASEMENT Pre flocculation tanks for chemical dosing with Bentonite. The system has an SDA tank by HMM.

The mill has a spare belt press, 1m width. Not in use. This unit has a pre flocculation tank with mixer.

COMPRESSORS Two air dryers model make Hamrin Atlas Copco screw type compressor model ZR160-10-50 YEAR 2001 Atlas Copco compressor item 914 run 46955 hrs

19 CONCRETE BUILDING WITH BASEMENT Pre flocculation tanks for chemical dosing with Bentonite. The system has an SDA tank by HMM. Floatation in concrete rectangular tank with surface sludge scrappers. Belt press: 1m width, discharging to bay below. The mill has a spare belt press, 1m width. Not in use. This unit has a pre flocculation tank with mixer. Sludge collected and loaded by shovel truck onto trailers. COMPRESSORS Two air dryers model make Hamrin Atlas Copco screw type compressor model ZR YEAR 2001 Atlas Copco compressor item 914 run hrs INTERNAL STORE AREA Two new AFT baskets for pressure screens Various spare rolls Sets of skates Spare body for Finckh screen New fillings for the JCO-1 refiners OTHER EXTERNAL TANKS Large blue tank insulated in front of boiler house. Lorry base unit with small rear wheels for site transportation of paper machine rolls John Wilkie Paper Mill Services Ltd 19

20 The mill has a sophisticated fire alarm system about four years old Type Siemens Sinteso. About 90 sensors. Investment Ca 150k The below listed specifications is more general and suitable for the specification; Production data. T/h Gr/M2 Total BM Operating Speed M/min Capacity Minimum grammage Maximum grammage Average grammage The above capacities are based on four ply OCC furnish and one ply Office waste. Capacities OCC pulp 11 T/h Capacities office waste 3 T/h can easily be increase if higher demand is needed. 1. Thermal energy consumption 1,2 MWh/ton. 2. Electrical energy consumption 0,5 MWh/ton. Energy requirements Thermic energy 1,2 MW/ton Boiler capacity 20 MW Electrical energy 0,5 MW/ton A full and detailed set of photographs is available for the complete paper mill. Drawings of the stock preparation systems and board machine are available in PDF format. John Wilkie Paper Mill Services Ltd 20

21 THIS INFORMATION IS THE TITLE OF JOHN WILKIE PAPER MILL SERVICES LTD AND SHOULD NOT BE COPIED OR FORWARDED TO A THIRD PARTY WITHOUT CONSENT. FOR YOUR GENERAL INFORMATION WE HAVE TO INTIMATE THE FOLLOWING TO YOU: This schedule has been prepared solely for the guidance of prospective purchasers and does not constitute (and at no time shall be deemed to constitute) an offer or contract or any part of an offer or contract. Additionally, no warranty is given to the accuracy of any measurements, specifications or other details whatsoever given within this schedule. Whilst every reasonable effort has been made to verify any statement, description, or comment made within this schedule, for the avoidance of doubt it is emphasised that the purchaser must make their own enquiries and satisfy themselves. John Wilkie Paper Mill Services Ltd 21

TWO PAPER MACHINES 8500mm Reel Width

TWO PAPER MACHINES 8500mm Reel Width These machines will only be sold for the production of brown grade papers. Mill voltage is 525 volts and incoming voltage is 10,000 volts, 3phase and 50 cycles. Number