Cable technology for highest safety requirements

Transcription

1 Cable technology for highest safety requirements

2 Daetwyler We are a provider of high-grade quality system solutions and services in the areas of structured data cabling, telecom carriers, safety cabling, building automation, cabling for the elevator industry, as well as for cable harnessing. We are a market leader in many areas with our innovative and high-performing products and system solutions. We achieve revenues of approximately 180 million Euros deploying around 780 staff members. Daetwyler Group The Daetwyler Group is an internationally-oriented multiniche player, active as an industrial supplier and distributor of technical and electronic components. Within these activities, the group focuses on attractive markets and niches with a potential for increasing its added value and achieving profitable growth. Through its four group divisions - Cables, Rubber, Pharmaceutical Packaging and Technical Components - the Daetwyler Group serves its core markets for the automotive, telecom and pharmaceutical as well as the construction and machine manufacturing industries. The Daetwyler Group, based in Altdorf (Switzerland), employs staff and has sales of approximately 800 million Euros; two thirds of which is achieved abroad. Innovation and Tradition 1915 Adolf Dätwyler establishes the company, and launches the production of electric cables made of aluminum The manufacture of telephone cables is launched The manufacture of high-frequency cables is launched For the first time in the history of high-voltage cables, Dätwyler isolates power cables accommodating over 15 kv capacity by using polyethylene material Manufacturing start-up of transmitter and receiver cables for televisions The flameproof cable Pyrofil250 is well accepted by the market IXOSIL end pieces supplement our high-voltage cable product line accommodating up to 60 kv capacity Establishment of Dätwyler Elektro GmbH headquartered in Hattersheim near Frankfurt, Germany The manufacture of high-voltage cables with built-in fibre optic represents a novelty on a worldwide basis Establishment of Dätwyler (UK) Ltd Production start-up of fibre optic cables. As first-to-do manufacturer of cables. Dätwyler certifies halogen-free safety cables over a period of 90 minutes by employing the uniform temperature time curve Introduction of uninet data copper cables, and the future-oriented conception of the structured data cabling pyrofil safety cables are successfully certified for E90 in accordance with DIN for the first time 1992 Establishment of Dätwyler System und Netzwerk GmbH headquartered in Neufahrn near Munich, Germany. worldwide Merger of both German subsidies to the company Dätwyler Kabel+Systeme GmbH Establishment of Dätwyler Kabel+Systeme GmbH head-quartered in Vienna, Austria Establishment of Dätwyler Cables+Systems Pte Ltd., Singapore Establishment of Datwyler Cables+Systems Co. Ltd Shanghai, China Dätwyler AG Altdorf sells the business area for high-voltage technology to Alcatel Cable Suisse SA optofil Safety is the first metalfree fibre optic cable with circuit integrity E30 according to DIN Opening of the central EU-warehouse in Hattersheim near Frankfurt, Germany Dätwyler presents FloorLink, the economical wiring system for elevator shafts Dun & Bradstreet Swiss Business Award 2005 for Dätwyler.

3 pyrofil Cable Safety cables with system circuit integrity Low voltage cables up to 0.6/1 kv E30-E90; FE180; BS 6387 CWZ; PH30-120, Rf / 2 s Safety cables with insulation and circuit integrity to maintain power supplies to sprinkler systems, emergency lighting, smoke and heat extraction systems, emergency lift supplies and fire fighting lifts. Product range/standards Single core cables from 1.5 to 630 mm 2 Multi core cables from 1.5 to 300 mm 2 Also available with mechanical protection Standards/Approvals IEC, EN, CENELEC, BS, DIN VDE, SEV, NBN, VKF, VdS, GOST-R, Ukraine with mechanical protection Safety cables with improved characteristics in case of fire Low voltage cables up to 0.6/1 kv Safety cables with improved characteristics in case of fire. The alternative to traditional PVC cables, where no insulation or circuit integrity is required. Single core cables from 1.5 to 630 mm 2 Multi core cables from 1.5 to 300 mm 2 Also available with mechanical protection and as flexible version. Standards/Approvals IEC, EN, CENELEC, DIN VDE, SEV, GOST-R, Ukraine System components Single clamps, multi cable supports s Single clamps to install single cables or cable bundles conforming to common practice. Multiple cable supports for a cost effective installation of several cables. These components facilitate the quick and easy installation of cables. Support systems Special support systems to install several cables conforming to common practice. Approved for ceiling and wall mounting with possibility of easy retrospective installation of cables. Corresponding fixing devices, such as fire safety dowels, installation screws and setting tools are available for all support systems. Connecting technology Cable joints to connect pyrofil safety cables with circuit integrity. Distribution boxes with circuit integrity E30-E90. Also available as fire resistant covers to protect standard connection or junction blocks. Distribution boxes with circuit integrity for high- and low-voltage cables.

4 The most important test procedures Corrosive fire gases This test procedure provides information if the insulation material of the sheath material of cable creates corrosive gases in the event of fire. Halogen parts or other material in small quantities can be easily identified with this test due to the strong change of ph-value and the conductivity. The conductivity is < 10mS/mm Corrosion test of fire gases - IEC /-2, - EN /-2-2, - VDE /-2-2 Burning behaviour of a single cable This test method tests a 60 cm long cable sample for burning behaviour. This means that the flame must extinguish itself and the burn damage must not reach the upper end of sample. Test of Burning behaviour of a single tube or cable - IEC /-2, - EN /-2, - VDE /-2 Burning behaviour of a cable bundle This test method tests a 360 cm long cable bundle with regard to fire propagation. This means that flames must extinguish themselves and burn damage must not exceed a defined height. Test of Burning behaviour of a cable bundle - IEC /-22/-23 /-24/-25 Cat. A-D - EN /-3/-4/-5 Cat. A-D - VDE /-3 /-4/-5 Cat. A-D Smoke density test This test checks smoke development when burning the cable or the impairment of the visibility by burning cables. The reduction in light transparency is measured in a standard chamber. Test of smoke density - IEC /-2, - EN /-2 (EN /-2), - VDE /-2 - (VDE /-2)

5 Test of circuit integrity (FE) This test establishes whether a single cable can maintain circuit integrity during and after exposure to a fire for a time period of at least 180 minutes. Cables which fulfil the requiremetns of this test are marked with <<FE180>> after their type designation. There is no obligation to test the cable for functional integrity beyond the designated period. Remark: This test is not equivalent to the test for functional integrity according to DIN Test of Circuit integrity (Fire and water) - BS 6387 (cat.w) [650 C] - VdS 3423 [>830 C] Test of Circuit integrity (Fire and mechanical shock) - EN 50200, IEC , VDE [>830 C] - EN 50362, IEC , VDE [>830 C] - BS 6387 (cat.z) [950 C] Test of Circuit integrity (Fire alone) - IEC /-21/-23 /-25 [>750 C] - BS 6387 (cat. C) [950 C] - VDE [>750 C] Test of Circuit integrity of electrical cable installations This standard describes the requirements and the actions for the achievement of the functional integrity of electrical cable installations in the event of fire. While the circuit integrity FE provides only for the test of single cables, the cables here are tested in connection with practical fixing systems. It is important to appreciate that there is no connection between the two standards, circuit integrity (FE/PH) and system circuit integrity (E). The test is carried out and certified from state recognised institutes. Test of circuit integrity of electrical cable installations - DIN (E30-E90) - (NBN (Rf1, Rf1 1 / 2 )) Better than the standard! This test (E30-E90) is now the world wide standard for guaranteeing functional integrity of the complete electrical cable installation, including the fixing components, under normal operating conditions.

6 pyrofil N2XH Safety low voltage cable 0.6/1kV Halogen-free, with improved fire characteristics CENELEC HD 604 S1, VDE Sheath FRNC/LS0H Flame retardant, Cross-linked PE Solid/stranded For permanent installation in dry, damp or wet areas, on or behind plasterwork or in walls or concrete. Also suitable for outdoor applications. The cable should only be laid directly in earth or water if a protective conduit is used. Permitted operating temperature at conductor of +90 C. Construction Outer sheath Core colours Sheath colour Imprint Electrical Properties Nominal voltage Test voltage Bare copper, solid or stranded to IEC 60228, EN 60228, (VDE 0295) Cross-linked polyethylene in according to CENELEC HD 604 S1 and VDE XI1 Halogenfree, compound or plastic tape Polyolefin compound in according to CENELEC HD 604 S1 and VDE HM4 According to CENELEC HD 308 S2 and VDE 0293 Black or green/yellow DAETWYLER PYROFIL N2XH 1kV N X MM2 <VDE> 0276 ORDER NO. YEAR METRE MARKING 0.6/1kV 4000V, 50Hz General Properties Minimum bending Radius during and permanent installation 15* x D (single core cable) 12* x D (multicore cable) (D = outer diameter) permanent installation *50% reduction if installation at 30 C and with a template Operating temperature permanent installation -45 C to +90 C during installation -5 C to +50 C Zero halogen non corrosive gases IEC , EN , VDE Flame retardant IEC , EN , VDE Fire resistant (no flame propagation) IEC /-24 Cat. A/C, EN /-4 Cat. A/C, VDE /-4 Cat. A/C Minimum smoke emission IEC /-2, EN /-2 (EN /-2), VDE /-2 (VDE /-2) Article No. of cores x Colours Cu Total Mean overall No. cross section content weight diameter n x mm 2 kg/km app. kg/km app. in mm x 16 RM green/yellow , x 25 RM black , x 25 RM green/yellow , x 35 RM black , x 35 RM green/yellow , x 50 RM black , x 50 RM green/yellow , x 70 RM black , x 70 RM green/yellow , x 95 RM black , x 95 RM green/yellow , x 120 RM black , x 120 RM green/yellow , x 150 RM black , x 150 RM green/yellow , x 185 RM black , x 185 RM green/yellow , x 240 RM black , x 240 RM green/yellow , x 1,5 RE , x 1,5 RE , x 2,5 RE , x 4 RE , x 6 RE , x 10 RE , x 16 RM , x 1,5 RE , x 2,5 RE , x 4 RE , x 6 RE , x 10 RE , x 16 RM , x 25 RM , x 35 RM , x 50 RM , x 70 RM , x 95 RM , x 1,5 RE , x 2,5 RE , x 4 RE , x 6 RE , x 10 RE , x 16 RM , x 25 RM , x 1,5 RE , x 2,5 RE , x 1,5 RE , x 2,5 RE , x 1,5 RE , x 2,5 RE , x 1,5 RE , x 1,5 RE , x 1,5 RE , x 1,5 RE ,0 RE = circular, solid conductor RM = circular, stranded conductor Additional dimensions available on request. Technical changes reserved.

7 pyrofil N2XCH Safety low voltage cable 0.6/1kV Halogen-free, with improved fire characteristics CENELEC HD 604 S1, VDE Sheath FRNC/LS0H Separator Plastic tape Reinforcing helix Bare copper tape Concentric conductor Bare copper wire Flame retardant, Cross-linked PE Solid/ stranded For permanent installation in dry, damp or wet areas, on or behind plasterwork or in walls or concrete. Also suitable for outdoor applications. The cable should only be laid directly in earth or water if a protective conduit is used. Permitted operating temperature at conductor of +90 C. Construction Concentric conductor Separator Outer sheath Core colours Sheath colour Imprint Electrical Properties Nominal voltage Test voltage Bare copper, solid or stranded to IEC 60228, EN 60228, (VDE 0295) Cross-linked polyethylene in according to CENELEC HD 604 S1 and VDE XI1 Halogenfree, compound or plastic tape Bare copper wires with reinforced helix Plastic tape Polyolefin compound in according to CENELEC HD 604 S1 and VDE HM4 According to CENELEC HD 308 S2 and VDE 0293 Black DAETWYLER PYROFIL N2XCH 1kV N X MM2 <VDE> 0276 ORDER NO. YEAR METRE MARKING 0.6/1kV 4000V, 50Hz General Properties Minimum bending Radius during and permanent installation 12 x D (multicore cable) (D = outer diameter) Operating permanent installation -45 C to +90 C temperature during installation -5 C to +50 C Zero halogen non corrosive gases IEC , EN , VDE Flame retardant IEC , EN , VDE Fire resistant (no flame propagation) IEC /-24 Cat. A/C, EN /-4 Cat. A/C, VDE /-4 Cat. A/C Minimum smoke emission IEC /-2, EN /-2 (EN /-2), VDE /-2 (VDE /-2) Article No. of cores x Cu Total Mean overall No. cross section content weight diameter n x mm 2 kg/km app. kg/km app. in mm x 1,5 RE/1, , x 2,5 RE/2, , x 1,5 RE/1, , x 2,5 RE/2, , x 4 RE/ , x 6 RE/ , x 10 RE/ , x 16 RM/ , x 25 RM/ , x 35 RM/ , x 50 RM/ , x 1,5 RE/1, , x 2,5 RE/2, , x 4 RE/ , x 6 RE/ , x 10 RE/ , x 16 RM/ , x 25 RM/ , x 35 RM/ , x 50 RM/ , x 70 RM/ , x 95 RM/ , x 120 RM/ , x 150 RM/ , x 185 RM/ , x 240 RM/ , x 1,5 RE/2, , x 2,5 RE/2, , x 4 RE/ , x 6 RE/ , x 1,5 RE/2, , x 2,5 RE/ , x 1,5 RE/ , x 1,5 RE/ , x 2,5 RE/ ,0 RE = circular, solid conductor RM = circular, stranded conductor Additional dimensions available on request. Technical changes reserved.

8 pyrofil FE5-CL Safety low voltage cable 0.6/1kV Armoured with rodent-protection Halogen-free, with improved fire characteristics With reference to SEV TP 20B/3C and CENELEC HD 604 S1 part 5. H Sheath FRNC/LS0H Armouring Galvanised steel tape Inner sheath Polyolefin flame retardant, low smoke, Cross-linked PE Solid/stranded For permanent installation in dry, damp or wet areas, on or behind plasterwork or in walls or concrete. Also suitable for outdoor applications. The cable should only be laid directly in earth or water if a protective conduit is used. Permitted operating temperature at conductor of +90 C. Construction Bare copper, solid or stranded to IEC 60228, EN Crosslinked polyethylene according to CENELEC HD 604 S1 part 5 sec. H HIC Inner sheath Flame retardant, Polyolefin compound according to CENELEC HD 604 S1 part 5 sec. H HMT1 Armouring / [rodent-protection] Galvanised steel tape Outer sheath Flame retardant, Polyolefin compound according to CENELEC HD 604 S1 part 5 sec. H HMT1 Core colours Sheath colour Imprint Electrical Properties Nominal voltage Test voltage According to CENELEC HD 308 S2 Black DAETWYLER PYROFIL CL N X MM2 ORDER NO. YEAR METRE MARKING 0.6/1kV 3500V, 50Hz General Properties Minimum bending Radius during and permanent installation 15* x D (single core cable) 12* x D (multicore cable) (D = outer diameter) Operating temperature permanent installation -45 C to +90 C during installation -5 C to +50 C Zero halogen non corrosive gases IEC , EN , VDE , SEV TP 20B/3C Flame retardant IEC , EN , VDE , SEV TP 20B/3C Fire resistant (no flame propagation) IEC Cat. C, EN Cat. C, VDE Cat. C, SEV TP 20B/3C Minimum smoke emission IEC /-2, EN /-2 (EN /-2), VDE /-2 (VDE /-2), SEV TP 20B/3C Article No. of cores x Cu Total Mean overall No. cross section content weight diameter n x mm 2 kg/km app. kg/km app. in mm 2 x 1,5 RE x 2,5 RE x 1,5 RE x 2,5 RE x 4 RE x 6 RE x 10 RE x 16 RM x 1,5 RE x 2,5 RE x 4 RE x 6 RE x 10 RE x 16 RM x 25 RM x 35 RM x 2,5 RE x 4 RE x 6 RE x 10 RE x 10 RM x 16 RM x 25 RM x 35 RM x 50 RM x 70 RM x 95 RM x 1,5 RE x 2,5 RE x 4 RE x 6 RE x 10 RE x 1,5 RE x 2,5 RE x 1,5 RE x 2,5 RE x 1,5 RE x 2,5 RE x 2,5 RE x 2,5 RE RE = circular, solid conductor RM = circular, stranded conductor Additional dimensions available on request. Technical changes reserved.

9 pyrofil Keram FE180 Safety low voltage cable 0.6/1kV Halogen-free, with improved fire characteristics with reference to SEV TP 20B/3C and CENELEC HD 604 S1 part 5.H Circuit integrity (FE180) in accordance IEC Sheath FRNC/LS0H Flame retardant, Fire barrier High-peformance Keram compound Crosslinked polymer Solid/stranded Safety cables are used in all situations that require special protection against fire and flame damage for people and equipment and where a high degree of safety conditions must be fulfilled. Suitable for indoor applications. For outdoor applications, protection must be provided against exposure to direct sunlight. The cable should only be laid directly in earth or water if a protective conduit is used. Permitted operating temperature at conductor +90 C. Construction Outer sheath Core colours Sheath colour Imprint Electrical Properties Nominal voltage Test voltage Bare copper, solid or stranded to IEC 60228, EN 60228, (VDE 0295) Double insulation, cross-linked, high-performance Keram special compound according to CENELEC HD 604 S1 part 5 sec. H HIC Flame retardant, halogenfree, thermoplastic compound Flame retardant, Polyolefin compound according to CENELEC HD 604 S1 part 5 sec. H HMT1 According to CENELEC HD 308 S2 orange DAETWYLER PYROFIL KERAM FE180 N X MM2 ORDER NO. YEAR METRE MARKING 0.6/1kV 3500V, 50Hz General Properties Minimum bending Radius during and permanent installation 15* x D (single core cable) 12* x D (multicore cable) (D = outer diameter) permanent installation *50% reduction if installation at 30 C and with a template Operating permanent installation -45 C to +90 C temperature during installation -5 C to +50 C Zero halogen non corrosive gases IEC , EN , VDE , SEV TP20B/3C Flame retardant IEC , EN , VDE , SEV TP20B/3C Fire resistant (no flame propagation) IEC Cat. C, EN Cat. C, VDE Cat. C, SEV TP20B/3C Minimum smoke emission IEC /-2, EN /-2 (EN /-2), VDE /-2 (VDE /-2), SEV TP20B/3C Circuit integrity (FE180) IEC /-21 (180 minutes), VDE 0472 part 814, SEV TP20B/3C Article No. of cores x Cu Total Mean overall No. cross section content weight diameter n x mm 2 kg/km app. kg/km app. in mm x 16 RM , x 25 RM , x 35 RM , x 50 RM , x 70 RM , x 95 RM , x 120 RM , x 150 RM , x 185 RM , x 240 RM , x 1,5 RE , x 2,5 RE ,0 2 x 4 RE ,4 2 x 6 RE ,8 2 x 10 RE , x 16 RM , x 25 RM , x 1,5 RE , x 2,5 RE , x 4 RE , x 6 RE ,5 3 x 10 RE , x 16 RM , x 25 RM , x 35 RM , x 50 RM , x 1,5 RE ,1 4 x 2,5 RE ,5 4 x 4 RE ,2 4 x 6 RE ,8 4 x 10 RE , x 16 RM , x 25 RM , x 35 RM , x 50 RM , x 70 RM , x 95 RM , x 120 RM , x 150 RM , x 185 RM , x 240 RM , x 1,5 RE , x 2,5 RE , x 4 RE , x 6 RE ,2 5 x 10 RE , x 16 RM , x 25 RM , x 35 RM , x 50 RM , x 70 RM , x 95 RM , x 1,5 RE , x 2,5 RE , x 1,5 RE ,2 12 x 2,5 RE ,7 RE = circular, solid conductor RM = circular, stranded conductor Additional dimensions available on request. Technical changes reserved.

10 pyrofil Keram FE180-CL Safety low voltage cable 0.6/1kV, armoured with rodent-protection Halogen-free, with improved fire characteristics with reference to SEV TP 20B/3C and CENELEC HD 604 S1 part 5.H Circuit integrity (FE180) in accordance IEC Sheath FRNC/LS0H Inner sheath Polyolefin flame retardant, low smoke, Armouring Galvanised steel tape Flame retardant, Fire barrier High-peformance Keram compound Crosslinked polymer Solid/stranded Safety cables are used in all situations that require special protection against fire and flame damage for people and equipment and where a high degree of safety conditions must be fulfilled. Suitable for indoor applications. For outdoor applications, protection must be provided against exposure to direct sunlight. The cable should only be laid directly in earth or water if a protective conduit is used. Permitted operating temperature at conductor +90 C. Construction Bare copper, solid or stranded to IEC 60228, EN Double insulation, cross-linked, high-performance Keram special compound according to CENELEC HD 604 S1 part 5 sec. H HIC Flame retardant, halogenfree, thermoplastic compound Inner sheath Flame retardant, Polyolefin compound according to CENELEC HD 604 S1 part 5 sec. H HMT1 Armouring/ [rodent-protection] Galvanised steel tape Outer sheath Flame retardant, Polyolefin compound according to CENELEC HD 604 S1 part 5 sec. H HMT1 Core colours Sheath colour Imprint Electrical Properties Nominal voltage Test voltage According to CENELEC HD 308 S2 orange DaeTWYLER PYROFIL KERAM FE180-CL N X MM2 ORDER NO. YEAR METRE MARKING 0.6/1kV 3500V, 50Hz General Properties Minimum bending Radius during and permanent installation 15 x D (single core cable) 12 x D (multicore cable) (D = outer diameter) Operating permanent installation -45 C to +90 C temperature during installation -5 C to +50 C Zero halogen non corrosive gases IEC , EN , VDE , SEV TP20B/3C Flame retardant IEC , EN , VDE , SEV TP20B/3C Fire resistant (no flame propagation) IEC Cat. C, EN Cat. C, VDE Cat. C, SEV TP20B/3C Minimum smoke emission IEC /-2, EN /-2 (EN /-2), VDE /-2 (VDE /-2), SEV TP20B/3C Circuit integrity (FE180) IEC /-21 (180 minutes), VDE 0472 part 814, SEV TP20B/3C Article No. of cores x Cu Total Mean overall No. cross section content weight diameter n x mm 2 kg/km app. kg/km app. in mm 3 x 1,5 RE x 2,5 RE x 4,0 RE x 6,0 RE x 10 RE x 16 RM x 25 RM x 35 RM x 50 RM x 70 RM x 95 RM x 120 RM x 150 RM x 1,5 RE x 2,5 RE x 4 RE x 6 RE x 10 RE x 16 RM x 25 RM x 35 RM x 50 RM x 70 RM x 95 RM x 120 RM x 150 RM x 1,5 RE x 2,5 RE x 4 RE x 6 RE x 10 RE x 16 RM x 25 RM x 35 RM x 50 RM x 70 RM x 95 RM x 1,5 RE x 2,5 RE x 4 RE x 6 RE x 10 RE x 1,5 RE x 2,5 RE x 1,5 RE x 2,5 RE x 1,5 RE x 2,5 RE x 1,5 RE x 2,5 RE x 1,5 RE x 2,5 RE RE = circular, solid conductor RM = circular, stranded conductor Additional dimensions available on request. 10 Technical changes reserved.

11 pyrofil Keram (N)HXH FE180 E30-E60 Safety low voltage cable 0.6/1kV Halogen-free, with improved fire characteristics With reference to VDE 0266 and CENELEC HD 604 S1 Circuit integrity (FE180) in accordance with VDE , IEC System Circuit integrity E30-E60* in accordance with DIN Sheath FRNC/LS0H Flame retardant, Fire barrier High-peformance Keram compound Crosslinked polymer Solid/ stranded Safety cables are used in all situations that require special protection against fire and flame damage for people and equipment and where a high degree of safety conditions must be fulfilled. Suitable for indoor applications. For outdoor applications, protection must be provided against exposure to direct sunlight. The cable should only be laid directly in earth or water if a protective conduit is used. These cables correspond to the demands of system circuit integrity E30-E60* in accordance with DIN System circuit integrity is guaranteed at an operating voltage up to 400V. Permitted operating temperature at conductor +90 C. Construction Bare copper, solid or stranded to IEC 60228, EN 60228, (VDE 0295) Double insulation, cross-linked, highperformance Keram special compound according to VDE 0266 HXI1 Flame retardant, halogenfree, thermoplastic compound Outer sheath Flame retardant, Polyolefin compound according to CENELEC HD 604 S1 and VDE HM4 Core colours According to CENELEC HD 308 S2 and VDE 0293 Sheath colour Imprint Electrical Properties Rated voltage Test voltage orange DaeTWYLER PYROFIL KERAM (N)HXH FE180 E30-E60 1kV N X MM2 VDE REG. NR ORDER NO. YEAR METRE MARKING 0.6/1kV 4000V, 50Hz General Properties Minimum bending Radius during and permanent installation 15* x D (single core cable) 12* x D (multicore cable) (D = outer diameter) permanent installation *50% reduction if installation at 30 C and with a template Operating permanent installation -45 C to +90 C temperature during installation -5 C to +50 C Zero halogen non corrosive gases IEC , EN , VDE Flame retardant IEC , EN , VDE Fire resistant (no flame propagation) IEC /-24 Cat. A/C, EN /-4 Cat. A/C, VDE /-4 Cat. A/C Minimum smoke emission IEC /-2, EN /-2 (EN /-2), VDE /-2 (VDE /-2) Circuit integrity (FE180) IEC /-21 (180 minutes), VDE 0472 part 814, BS 6387 CWZ, IEC , EN 50200, VDE IEC , EN 50362, VDE System Circuit integrity E30-E60* DIN 4102 part 12, NBN (Rf1) * System Circuit integrity is dependent on installation method. Article No. of cores x Cu Total Mean overall No. cross section content weight diameter n x mm 2 kg/km app. kg/km app. in mm x 16 RM , x 25 RM , x 35 RM , x 50 RM , x 70 RM , x 95 RM , x 120 RM , x 150 RM , x 185 RM , x 240 RM , x 1,5 RE , x 2,5 RE , x 4 RE , x 6 RE , x 10 RE , x 1,5 RE , x 2,5 RE , x 4 RE , x 6 RE , x 10 RE , x 16 RM , x 25 RM , x x 16 RM , x x 16 RM , x x 25 RM , x x 35 RM , x x 50 RM , x x 70 RM , x x 70 RM , x x 95 RM , x 1,5 RE , x 2,5 RE , x 4 RE , x 6 RE , x 10 RE , x 16 RM , x 25 RM , x 35 RM , x 50 RM , x 70 RM , x 95 RM , x 120 RM , x 150 RM , x 1,5 RE , x 2,5 RE , x 4 RE , x 6 RE , x 10 RE , x 16 RM , x 25 RM , x 35 RM , x 50 RM , x 1,5 RE , x 2,5 RE , x 1,5 RE , x 2,5 RE , x 1,5 RE , x 2,5 RE ,0 RE = circular, solid conductor, RM = circular, stranded conducto Additional dimensions available on request. * Circuit integrity is dependent on installation method Technical changes reserved. 11

12 pyrofil Keram (N)HXCH FE180 E30-E60 Safety low voltage cable 0.6/1kV Halogen-free, with improved fire characteristics With reference to VDE 0266 and CENELEC HD 604 S1 Circuit integrity (FE180) in accordance with VDE , IEC System Circuit integrity E30-E60* in accordance with DIN Sheath FRNC/LS0H Separator Plastic tape Concentric conductor Bare copper wire Reinforcing helix Bare copper tape Crosslinked polymer Flame retardant, Solid/stranded Fire barrier High-peformance Keram compound Safety cables are used in all situations that require special protection against fire and flame damage for people and equipment and where a high degree of safety conditions must be fulfilled. Suitable for indoor applications. For outdoor applications, protection must be provided against exposure to direct sunlight. The cable should only be laid directly in earth or water if a protective conduit is used. These cables correspond to the demands of system circuit integrity E30-E60* in accordance with DIN System circuit integrity is guaranteed at an operating voltage up to 400V. Permitted operating temperature at conductor +90 C. Construction Bare copper, solid or stranded to IEC 60228, EN 60228, (VDE 0295) Double insulation, cross-linked, highperformance Keram special compound according to VDE 0266 HXI1 Halogenfree, compound or plastic tape Concentric conductor Bare copper wires with reinforced helix Separator Plastic tape Outer sheath Polyolefin compound in according to CENELEC HD 604 S1 and VDE HM4 Core colours According to CENELEC HD 308 S2 and VDE 0293 Sheath colour Imprint Electrical Properties Nominal voltage Test voltage orange DaeTWYLER PYROFIL KERAM (N)HXCH FE180 E30-E60 1kV N X MM2 VDE REG. NR ORDER NO. YEAR METRE MARKING 0.6/1kV 4000V, 50Hz General Properties Minimum bending Radius during and permanent installation 15 x D (single core cable) 12 x D (multicore cable) (D = outer diameter) Operating permanent installation -45 C to +90 C temperature during installation -5 C to +50 C Article No. of cores x Cu Total Mean overall No. cross section content weight diameter n x mm 2 kg/km app. kg/km app. in mm x 1,5 RE/1, , x 2,5 RE/2, , x 4 RE/ , x 6 RE/ , x 10 RE/ , x 1,5 RE/1, , x 2,5 RE/2, , x 4 RE/ , x 6 RE/ , x 10 RE/ , x 16 RM/ , x 25 RM/ , x 35 RM/ , x 50 RM/ , x 70 RM/ , x 95 RM/ , x 120 RM/ , x 150 RM/ , x 185 RM/ , x 240 RM/ , x 1,5 RE/1, , x 2,5 RE/2, , x 4 RE/ , x 6 RE/ , x 10 RE/ , x 16 RM/ , x 25 RM/ , x 35 RM/ , x 50 RM/ , x 70 RM/ , x 95 RM/ , x 120 RM/ , x 150 RM/ , x 185 RM/ , x 240 RM/ , x 1,5 RE/2, , x 1,5 RE/ ,1 RE = circular, solid conductor, RM = circular, stranded conductor Additional dimensions available on request. * Circuit integrity is dependent on installation method Zero halogen non corrosive gases IEC , EN , VDE Flame retardant IEC , EN , VDE Fire resistant (no flame propagation) IEC /-24 Cat. A/C, EN /-4 Cat. A/C, VDE /-4 Cat. A/C Minimum smoke emission IEC /-2, EN /-2 (EN /-2), VDE /-2 (VDE /-2) Circuit integrity (FE180) IEC /-21 (180 minutes), VDE 0472 part 814, BS 6387 CWZ, IEC , EN 50200, VDE IEC , EN 50362, VDE System Circuit integrity E30-E60* DIN 4102 part 12 * System Circuit integrity is dependent on installation method. 12 Technical changes reserved.

13 pyrofil Keram (N)HXH CL FE180 E30-E60 Safety low voltage cable 0.6/1kV armoured with rodent-protection Halogen-free, with improved fire characteristics With reference to VDE 0266 and CENELEC HD 604 S1 Circuit integrity (FE180) in accordance with VDE , IEC System Circuit integrity E30-E60* in accordance with DIN Sheath FRNC/LS0H Armouring Galvanised steel tape Flame retardant Inner sheath Polyolefin flame retardant, low smoke, Fire barrier High performance Keram special compound Crosslinked polymer Solid/stranded Safety cables are used in all situations that require special protection against fire and flame damage for people and equipment and where a high degree of safety conditions must be fulfilled. Suitable for indoor applications. For outdoor applications, protection must be provided against exposure to direct sunlight. The cable should only be laid directly in earth or water if a protective conduit is used. These cables correspond to the demands of circuit integrity E30-E60* in accordance with DIN Circuit integrity is guaranteed at an operating voltage up to 400V. Permitted operating temperature at conductor +90 C. Construction Bare copper, solid or stranded to IEC 60228, EN 60228, (VDE 0295) Double insulation, cross-linked, high-performance Keram special compound according to VDE 0266 HXI1 Flame retardant, halogenfree, thermoplastic compound Inner sheath Flame retardant, Polyolefin compound according to CENELEC HD 604 S1 and VDE HM4 Armouring / [rodent-protection] Galvanised steel tape Outer sheath Flame retardant, Polyolefin compound according to CENELEC HD 604 S1 and VDE HM4 Core colours According to CENELEC HD 308 S2 and VDE 0293 Sheath colour Imprint Electrical Properties Nominal voltage Test voltage orange DAETWYLER PYROFIL KERAM (N)HXH CL FE180 E30-E60 1kV N X MM2 VDE REG.NR ORDER NO. YEAR METRE MARKING 0.6/1kV 4000V, 50Hz General Properties Minimum bending Radius during and permanent installation 15 x D (single core cable) 12 x D (multicore cable) (D = outer diameter) Operating permanent installation -45 C to +90 C temperature during installation -5 C to +50 C Article No. of cores x Cu Total Mean overall No. cross section content weight diameter n x mm 2 kg/km app. kg/km app. in mm 4 x 1,5 RE x 2,5 RE x 4 RE x 6 RE x 10 RE x 16 RM x 25 RM x 35 RM x 50 RM x 70 RM x 95 RM x 120 RM x 1,5 RE x 2,5 RE x 4 RE x 6 RE x 10 RE x 16 RM x 25 RM x 35 RM x 50 RM x 70 RM x 95 RM x 1,5 RE x 2,5 RE x 1,5 RE x 2,5 RE x 1,5 RE x 2,5 RE RE = circular, solid conductor, RM = circular, stranded conductor Additional dimensions available on request. * Circuit integrity is dependent on installation method Zero halogen non corrosive gases IEC , EN , VDE Flame retardant IEC , EN , VDE Fire resistant (no flame propagation) IEC /-24 Cat. A/C, EN /-4 Cat. A/C, VDE /-4 Cat. A/C Minimum smoke emission IEC /-2, EN /-2 (EN /-2), VDE /-2 (VDE /-2) Circuit integrity (FE180) IEC /-21 (180 minutes), VDE 0472 part 814, BS 6387 CWZ, IEC , EN 50200, VDE IEC , EN 50362, VDE System Circuit integrity DIN 4102 part 12 E30-E60* * System Circuit integrity is dependent on installation method. Technical changes reserved. 13

14 pyrofil Keram (N)HXH FE180 E90 Safety low voltage cable 0.6/1kV Halogen-free, with improved fire characteristics With reference to VDE 0266 and CENELEC HD 604 S1 Circuit integrity (FE180) in accordance with VDE , IEC System Circuit integrity E90 in accordance with DIN Sheath FRNC/LS0H Flame retardant, Fire barrier High-peformance Keram compound Crosslinked polymer Solid/ stranded Safety cables are used in all situations that require special protection against fire and flame damage for people and equipment and where a high degree of safety conditions must be fulfilled. Suitable for indoor applications. For outdoor applications, protection must be provided against exposure to direct sunlight. The cable should only be laid directly in earth or water if a protective conduit is used. These cables correspond to the demands of system circuit integrity E90 in accordance with DIN System circuit integrity is guaranteed at an operating voltage up to 400V. Permitted operating temperature at conductor +90 C. Construction Bare copper, solid or stranded to IEC 60228, EN 60228, (VDE 0295) Double insulation, cross-linked, highperformance Keram special compound according to VDE 0266 HXI1 Flame retardant, halogenfree, thermoplastic compound Outer sheath Flame retardant, Polyolefin compound according to CENELEC HD 604 S1 and VDE HM4 Core colours According to CENELEC HD 308 S2 and VDE 0293 Sheath colour Imprint Electrical Properties Nominal voltage Test voltage orange DAETWYLER PYROFIL KERAM (N)HXH FE180 E90 1kV N X MM2 VDE REG. NR Vds ORDER NO. YEAR METRE MARKING 0.6/1kV 4000V, 50Hz General Properties Minimum bending Radius during and permanent installation 15* x D (single core cable) 12* x D (multicore cable) (D = outer diameter) permanent installation *50% reduction if installation at 30 C and with a template Operating permanent installation -45 C to +90 C temperature during installation -5 C to +50 C Zero halogen non corrosive gases IEC , EN , VDE Flame retardant IEC , EN , VDE Fire resistant (no flame propagation) IEC /-24 Cat. A/C, EN /-4 Cat. A/C, VDE /-4 Cat. A/C Minimum smoke emission IEC /-2, EN /-2 (EN /-2), VDE /-2 (VDE /-2) Circuit integrity (FE180) IEC /-21 (180 minutes), VDE 0472 part 814, BS 6387 CWZ, IEC , EN 50200, VDE IEC , EN 50362, VDE System Circuit integrity E90 DIN 4102 part 12 System Circuit integrity under effect of water VdS 3423 [single core cable 16mm 2 ] Article No. of cores x Cu Total Mean overall No. cross section content weight diameter n x mm 2 kg/km app. kg/km app. in mm x 16 RM , x 25 RM , x 35 RM , x 50 RM , x 70 RM , x 95 RM , x 120 RM , x 150 RM , x 185 RM , x 240 RM , x 1,5 RE , x 2,5 RE , x 4 RE , x 6 RE , x 10 RE , x 1,5 RE , x 2,5 RE , x 4 RE , x 6 RE , x 10 RE , x 16 RM , x 25 RM , x x 16 RM , x x 25 RM , x x 35 RM , x x 50 RM , x x 70 RM , x x 70 RM , x x 95 RM , x 1,5 RE , x 2,5 RE , x 4 RE , x 6 RE , x 10 RE , x 16 RM , x 25 RM , x 35 RM , x 50 RM , x 70 RM , x 95 RM , x 120 RM , x 150 RM , x 1,5 RE , x 2,5 RE , x 4 RE , x 6 RE , x 10 RE , x 16 RM , x 25 RM , x 35 RM , x 50 RM , x 1,5 RE , x 2,5 RE , x 1,5 RE , x 2,5 RE , x 1,5 RE , x 2,5 RE ,0 RE = circular, solid conductor RM = circular, stranded conductor Additional dimensions available on request. 14 Technical changes reserved.

15 pyrofil Keram (N)HXCH FE180 E90 Safety low voltage cable 0.6/1kV Halogen-free, with improved fire characteristics With reference to VDE 0266 and CENELEC HD 604 S1 Circuit integrity (FE180) in accordance with VDE , IEC System Circuit integrity E90 in accordance with DIN Sheath FRNC/LS0H Separator Plastic tape Concentric conductor Bare copper wire Reinforcing helix Bare copper tape Flame retardant, Crosslinked polymer Fire barrier High-peformance Keram compound Solid/stranded Safety cables are used in all situations that require special protection against fire and flame damage for people and equipment and where a high degree of safety conditions must be fulfilled. Suitable for indoor applications. For outdoor applications, protection must be provided against exposure to direct sunlight. The cable should only be laid directly in earth or water if a protective conduit is used. These cables correspond to the demands of system circuit integrity E90 in accordance with DIN System circuit integrity is guaranteed at an operating voltage up to 400V. Permitted operating temperature at conductor +90 C. Construction Bare copper, solid or stranded to IEC 60228, EN 60228, (VDE 0295) Double insulation, cross-linked, highperformance Keram special compound according to VDE 0266 HXI1 Halogenfree, compound or plastic tape Concentric conductor Bare copper wires with reinforced helix Separator Plastic tape Outer sheath Polyolefin compound in according to CENELEC HD 604 S1 and VDE HM4 Core colours According to CENELEC HD 308 S2 and VDE 0293 Sheath colour Imprint Electrical Properties Nominal voltage Test voltage orange DAETWYLER PYROFIL KERAM (N)HXCH FE180 E90 1kV N X MM2 VDE REG. NR VDS ORDER NO. YEAR METRE MARKING 0.6/1kV 4000V, 50Hz General Properties Minimum during and permanent installation bending Radius 12 x D (multicore cable) (D = outer diameter) Operating permanent installation -45 C to +90 C temperature during installation -5 C to +50 C Zero halogen non corrosive gases IEC , EN , VDE Flame retardant IEC , EN , VDE Fire resistant (no flame propagation) IEC /-24 Cat. A/C, EN /-4 Cat. A/C, VDE /-4 Cat. A/C Minimum smoke emission IEC /-2, EN /-2 (EN /-2), VDE /-2 (VDE /-2) Circuit integrity (FE180) IEC /-21 (180 minutes), VDE 0472 part 814, BS 6387 CWZ, IEC , EN 50200, VDE IEC , EN 50362, VDE System Circuit integrity E90 DIN 4102 part 12 System Circuit integrity under effect of water VdS 3423 [n x 16mm 2 ] Article No. of cores x Cu Total Mean overall No. cross section content weight diameter n x mm 2 kg/km app. kg/km app. in mm x 1,5 RE/1, , x 2,5 RE/2, , x 4 RE/ , x 6 RE/ , x 10 RE/ , x 16 RM/ , x 25 RM/ , x 35 RM/ , x 50 RM/ , x 70 RM/ , x 95 RM/ , x 120 RM/ , x 150 RM/ , x 185 RM/ , x 240 RM/ , x 1,5 RE/1, , x 2,5 RE/2, , x 4 RE/ , x 6 RE/ , x 10 RE/ , x 16 RM/ , x 25 RM/ , x 35 RM/ , x 50 RM/ , x 70 RM/ , x 95 RM/ , x 120 RM/ , x 150 RM/ , x 185 RM/ , x 240 RM/ , x 1,5 RE/2, , x 2,5 RE/2, , x 1,5 RE/2, , x 2,5 RE/ , x 1,5 RE/ , x 2,5 RE/ , x 1,5 RE/ , x 2,5 RE/ ,2 RE = circular, solid conductor RM = circular, stranded conductor Additional dimensions available on request. Technical changes reserved. 15

16 Cable joint E30/E90 Cable joint E30/E90 For connection of two pyrofil Keram cable types (N)HXH/(N)HXH CL/(N)HXCH FE180/E30-E60, (N)HXH/(N)HXCH FE180/E90. The cable joint provides the relevant circuit integrity of the cables. Goods supplied Full shrink tube, without squeeze connections. Construction The joint consist of several heat-absorbing inner joints depending on the number of conductor connections and an external joint and several insulating tubes that act as a flame barrier. Assembly Cables are prepared as usual, with offset connection order. The connection joint is installed using any common warm air device. Detailed assembly instructions are provided with each joint. Mandrel crimping is not permitted for crimped connections. Article Dimensions Description No. [n x mm 2 ] x 1,5-4 x 4 pyrosys joint SMH x 6-4 x 10 pyrosys joint SMH x 16-4 x 25 pyrosys joint SMH x 35-4 x 50 pyrosys joint SMH x 70-4 x 95 pyrosys joint SMH x x 150 pyrosys joint SMH x x 240 pyrosys joint SMH x 1,5/1,5-4 x 4/4 pyrosys joint SMHC x 6/6-4 x 10/10 pyrosys joint SMHC x 16/16-4 x 25/16 pyrosys joint SMHC x 35/16-4 x 50/25 pyrosys joint SMHC x 70/35-4 x 95/50 pyrosys joint SMHC x 120/70-4 x 150/70 pyrosys joint SMHC x 185/95-4 x 240/120 pyrosys joint SMHC4 16 Technical changes reserved.

17 Cable supports E30 - E90 Multi cable support E30-E90 Type Hermann clamp Multi cable support E30-E90 Type Hermann clamp S Type SAS single clamp Type SAS pre-assembled single clamp with fire protection plugs type K6x5 Multi cable support E30-E90 Hermann clamp for wall and ceiling installation Fixing distance 800 mm / 600 mm* For laying multiple cables on ceilings or walls. Circuit integrity is achieved for pyrofil Keram cable types (N)HXH/(N)HXCH FE180/E30-E60, (N)HXH/(N)HXCH FE180/E90, JE-H(St)H FE180/E30-E90, JE-H(St)HRH FE180/E30-E90. Goods supplied Article No and Article No Set consists of 10 SHUD multi cable supports (Hermann clamps), including 10 pyrosys fire protection plugs KDM, 30 mm. Drill bit and tool set supplied separately. Recommended drill bit SDS1, recommended tool set SWM-SM 50. Article No Stainless steel plugs on request. Technical Data Hermann clamp Hermann clamp S Material Sendzimir Sendzimir galvanised sheet galvanised sheet Inner dimensions app. 110 x 75 x 80mm app. 70 x 52 x 56 mm Outer dimensions app. 125 x 95 x 80mm app. 84 x 73 x 56 mm Max. load 6 kg/m or 3 kg/m* 3 kg/m* Fixing distance 800 or 600 mm* 800 or 600 mm* Article No. Clamp type PU Hermann clamp 10 pieces Hermann clamp 750 pieces/skeleton box Hermann clamp S 10 pieces Hermann clamp S 1750 pieces/skeleton box Hermann clamp V2A(1.4301) 10 pieces For quick assembly of the SHUD Hermann clamp we recommend the Pyrosys tool set SWM-SM 50. Single clamp Type SAS Fixing distance 600 mm For laying single and multiple cables on ceilings or walls. Circuit integrity is achieved for pyrofil Keram cable types (N)HXH/(N)HXCH FE180/E30-E60, (N)HXH/(N)HXCH FE180/E90, JE-H(St)H FE180/E30-E90, JE-H(St)HRH FE180/E30-E90. Article Clamp type Cable-Ø PU No. [mm] SAS 6 D SAS 8 D SAS 10 D SAS 12 D SAS 14 D SAS 16 D SAS 18 D SAS 20 D SAS 22 D SAS 24 D SAS 26 D SAS 28 D SAS 30 D SAS 38 D neu SAS 47 D neu SAS 55 D neu SAS 60 D neu To attach the single clamp, we recommend the use of Dätwyler pyrosys fire protection plugs K6x5 and the Dätwyler pyrosys tool set EWA 6x5 SM for quick assembly. Type SAS pre-assembled single clamp with fire protection plugs type K6x5, 30 mm SAS 8 D - K6x SAS 12 D - K6x SAS 14 D - K6x SAS 16 D - K6x Required tool set SMu 6 SM. The required SDS1 32 mm drillbit is included in the set. *Please also see our optional installation methods: Installation of cable bundles in clamps, installation in steel armoured conduits, etc. Type SAS V4A steel grade (ask also for stainless steel plugs) SAS 19 D - V4A SAS 24 D - V4A SAS 29 D - V4A SAS 38 D - V4A SAS 47 D - V4A SAS 55 D - V4A SAS 63 D - V4A Please also see our optional installation methods: Installation of cable bundles in clamps, installation in steel armoured conduits, etc. Technical changes reserved. 17

18 Strap clamp Type B strap clamp without trough C-shaped rail 2970/2SLD Type B strap clamp with trough Strap clamp Type B without trough (LW) Fixing distance mm For laying several cables independently in parallel on ceilings and walls. Circuit integrity is achieved for pyrofil Keram cable types (N)HXH/(N)HXCH FE180/E30-E60, (N)HXH/(N)HXCH FE180/E90, JE-H(St)H FE180/E30-E90, JE-H(St)HRH FE180/E30-E90. Article Clamp type Cable-Ø PU No. [mm] B 12 D B 14 D B 16 D B 18 D B 22 D B 26 D B 30 D B 34 D B 38 D B 42 D B 46 D B 50 D B 54 D B 58 D B 64 D B 70 D B 76 D B 82 D B 90 D B 100 D B 110 D Strap clamp Type B with trough (LW) Fixing distance 800 mm For laying several cables independently or in bundles in parallel on ceilings and walls. Circuit integrity is achieved for pyrofil Keram cable types (N)HXH/(N)HXCH FE180/E30-E60, (N)HXH/(N)HXCH FE180/E90, JE-H(St)H FE180/E30-E90, JE-H(St)HRH FE180/E30-E90 (800 mm). Article Clamp type Cable-Ø PU No. [mm] B 16 D LW 16 D B 22 D LW 22 D B 26 D LW 26 D B 34 D LW 34 D B 38 D LW 38 D B 42 D LW 42 D B 46 D LW 46 D B 50 D LW 50 D B 54 D LW 54 D The C-shaped rail 2970/2 SLD is required to fix the strap clamps. Article No. C-shaped rail Slit width PU /2 SLD 16 mm on request For assembly of the C-shaped rail, we recommend pyrosys fire protection plugs KDM, 30 mm. Do not exceed the maximum tensile force on the fire protection plugs! Shaped rails come in 2 m lengths. Other lengths are available on request. For fast assembly of the shaped rail, we recommend the pyrosys tool set SWM-SM. Please also see our optional installation methods: Installation of cable bundles in clamps, installation in steel armoured conduits, etc. 18 Technical changes reserved.

19 Cable tray without threaded rod suspension Cable tray without threaded rod suspension For laying single and multiple cables under ceilings or on walls. Circuit integrity is achieved for pyrofil Keram cable types (N)HXH/(N)HXCH FE180/E30-E60, (N)HXH/(N)HXCH FE180/E90, JE-H(St)H FE180/E30-E90, JE-H(St)HRH FE180/E30-E90. This cable tray system needs no threaded rod suspensions for circuit integrity. Maximum permissible fixing distance up to 1500 mm. Maximum load - 20 kg/m. Technical Data Material Nominal size Steel galavanised 60 x 100 mm, 60 x 200 mm 60 x 300 mm, 60 x 400 mm pyrosys plugs Article Type Nominal size PU No. [mm] M10x10 SD 10/10 M10x piece pyrosys wall consoles KWMS 010F 100 mm 1 piece KWMS 020F 200 mm 1 piece KWMS 030F 300 mm 1 piece KWMS 040F 400 mm 1 piece pyrosys consoles for hangers pyrosys cable tray Article Type Nominal size PU No. [mm] RG 60-10S 100 mm 1 piece = 3 m RG 60-20S 200 mm 1 piece = 3 m RG 60-30S 300 mm 1 piece = 3 m RG 60-40S 400 mm 1 piece = 3 m pyrosys lateral connector RGV-BS 60S 60 mm 1 piece pyrosys bottom connector VB-BS 10S 100 mm 1 piece VB-BS 20S 200 mm 1 piece VB-BS 30S 300 mm 1 piece VB-BS 40S 400 mm 1 piece KUMS 010F 100 mm 1 piece KUMS 020F 200 mm 1 piece KUMS 030F 300 mm 1 piece KUMS 040F 400 mm 1 piece pyrosys hangers KDU 52-03F 300 mm 1 piece KDU 52-04F 400 mm 1 piece KDU 52-05F 500 mm 1 piece KDU 52-06F 600 mm 1 piece KDU 52-07F 700 mm 1 piece KDU 52-08F 800 mm 1 piece KDU 52-09F 900 mm 1 piece KDU 52-10F 1000 mm 1 piece pyrosys accessories to fix the consoles on hangers ring washer US 10x21 M10x piece nut SEM 10 M piece screw KLS 10x20 M10x piece pyrosys screws for fixing the tray on the console screw set KLAR M6 100 piece pyrosys lateral reenforcement in the area of consols ALS-BS S 1 piece Technical changes reserved. 19

20 Wire mesh cable tray Wire mesh cable tray For laying single and multiple cables under ceilings or on walls. Circuit integrity is achieved for pyrofil Keram cable types (N)HXH/(N)HXCH FE180/E30-E60. Maximum permissible fixing distance up to 1250mm. Maximum load - 10 kg/m Technical Data Material Steel wire, mesh 50x100mm, flange height 54mm, Corrosion Galavanised (electrolytic) protection in accordance with DIN (zinc layer µ). Others on request Approvals VDE 0639, CEI 1537 pyrosys wire mesh cable tray Article Type Nominal width kg/m PU No. [mm] GR ,29 3 m GR ,53 3 m GR ,77 3 m Note: For cutting, a bolt cutter with offset cutting has to be used. pyrosys ceiling console screwless Corrosion protection: Sendzimir galvanised DIN (zinc coating app. 21µ). Other on request Article Type Height x width for kg/piece PU No. [mm] GR DKS 100 app. 210 x 230 GR , GR DKS 150 app. 210 x 280 GR , GR DKS 200 app. 210 x 380 GR ,87 1 pyrosys wall console, screwless Corrosion protection: Sendzimir galvanised DIN (zinc coating app. 21µ). Other on request Article Type Height x width for kg/piece PU No. [mm] GR WKS 100 app. 170 x 230 GR , GR WKS 150 app. 170 x 280 GR , GR WKS 200 app. 170 x 380 GR ,64 1 Wire mesh cable tray Accessories pyrosys wire mesh cable tray accessories Article No. Type Description Info GR VBS Push Contents: connector 50 push connectors, set 50 Snap connectors, 200 bolts, nuts M6 snap-in parts for straight For each push connection, joints 8 bolts, nuts, M6 snap-in parts, 2 push connectors and 2 snap connectors are provided. for 90 For each 90 angle for barred groove angles 100, 6 bolts, nuts, snap-in-pieces M6 and 1.5 push connectors are provided For each 90 angle for barred groove 150, 8 bolts, nuts, snap-in-pieces M6 and 2 push connectors are provided For each 90 angle for barred groove 200, 6 bolts, nuts, M6 snap-in parts, 2 snap connectors and 1 push connector are provided for For each T-junction for a barred T-junctions groove 100 or 200, 3 bolts, nuts, snap-in-parts M6 and snap connectors are provided for For each T-junction for a barred cross joints groove bolts, nuts, M6 snap-in parts, 1 snap connector and 2 push connectors are provided pyrosys wire mesh cable tray fixings Article No. Type Description Info GAS Thread For thread attachment 8x220 Suspension to ceiling console GR DKS set M8x220 Contents: 50 thread rails M8x220, KMu LF8 plugs 100 underlay disks, nuts M8 (recommended tool set SMu 8 SM, drillbit SDS2) GS Thread rod For thread attachment 8x1000 M8x1000 to wall console GR WKS; VPE 10 pieces GZS Thread rod Accessories for thread rod suspension attachment attachment GS 8x1000 Accessories Contents: 100 underlay disks M8 nuts, KMu LF8 plugs, (recommended tool set SMu 8 SM, drillbit SDS2) 20 Technical changes reserved.

21 Fire protection plugs K 6x5 30mm seat depth KDM 30mm seat depth KMu F10/KMu F12 40mm or 60mm seat depth Fire protection plugs For installation of cable systems with integrated circuit integrity. Note The fire protection plugs are suitable for applications in concrete. In order to guarantee the specified strength of the fire protection plugs, ensure that the drill holes are at the specified depth. When using the drill bit supplied with the plug set, the hole depth is maintained. pyrosys Fire protection plugs Article No. Plug Mounting of Info Plug set pyrosys SAS Contains 200 K6x5 K6x5 single clamps incl. SDS1 drill bit 30 mm Required drill bit SDS1. Single/distance This is included in the set. clamps Recommended with M6 thread tool set EWA6x5 SM Plug set Single/distance Contains 200 KDM KDM clamps incl. SDS1 drill bit 30 mm with continuous Required drill bit SDS1. hole mm This is included in the set. pyrosys Recommended tool set Hermann clamp SWS-SM or SWS-SM Plug set Shaped rails Contains 200 KDM KDM pyrosys incl. SDS1 drill bit 30 mm 2970/2 SLD Required drill bit SDS1. (for laying This is included in the set. strap clamps) Recommended tool set SWS-SM Plugs Cable trays, Contains 50 KMuF10. KMuF10 cable ladders, Required drill bit M10 thread rod SDS Duo-Set hv60 Recommended tool set SMu10H Plugs Cable trays, Contains 50 KMuF12. KMuF12 cable ladders, Required drill bit M12 threaded rod SDS Duo-Set hv60 Recommended tool set SMu12H Plugs Special mounting Contains 150 K6x80 K6x80 on insulated For use with standard drill bit. ceilings or walls Min. required depth of with insulation 30mm to be guaranteed thickness by the depth gauge on up to 75mm the drilling machine. Recommended tool set EWA 6x5 SM Plugs Special mounting Contains 100 K6x110 K6x105 on insulated For use with standard drill bit. ceilings or walls Min. required depth of with insulation 30mm to be guaranteed thickness by the depth gauge on up to 105mm the drilling machine. Recommended tool set EWA 6x5 SM Plugs tread rod M8 Contains 100 KMu LF8 KMu LF8 Technical changes reserved. 21

22 Distribution box E30-E90 Type Hercules distribution box Hercules distribution box E30-E90 Hercules-Cover AHD E30-E90 Distribution box E30-E90 Type Hercules distribution box Terminal box or cover for power current and low current according to DIN (circuit integrity class E30 or E90). Emergency lighting, alarm circuits and fire announcement systems, fire alarm systems Goods supplied Hercules cover box E30-E90 Typ AHD... To protect commercial distribution and branch boxes against the effects of fire for a period of 30 or 90 minutes (circuit integrity class E30 or E90). Emergency lighting, alarm circuits and fire announcement systems, fire alarm systems, protection of sub-distribution boxes, etc. incl. mounting angles, screws, cartridge of fire protection filler SP S 100 SM-K Hercules distribution box E30-E90 Typ HS... (Power current distribution box) incl. mounting screws, cartridge of fire protection filler S 100 SM-K top hat rail 35x7,5x250 mm. Hercules distribution box E30-E90 Typ HI... (Low current distribution box) incl. mounting screws, cartridge of fire protection filler S 100 SM-K QSA back mount frame... x 105 x 50 mm. (Quante: depth 30 mm, pitch: 27,5 mm) Article Type Dimensions top hat rail / PU No. [mm] frame Hercules cover AHD E30-E AHD outside 340 x 380 x 220 empty 1 E90 inside 260 x 300 x 130 w / o base Hercules distribution box E30-E90 with top hat rail HS outside 340 x 380 x x 7,5 1 E90 inside 260 x 300 x row HS outside 430 x 380 x x 7,5 1 E90 inside 350 x 300 x rows HS outside 600 x 380 x x 7,5 1 E90 inside 520 x 300 x rows Hercules distribution box E30-E90 with QSA trough HI outside 340 x 380 x x 105 x 50 1 E90 inside 260 x 300 x 130 (6 strips) HI outside 430 x 380 x x 105 x 50 1 E90 inside 350 x 300 x 130 (11 strips) HI outside 600 x 380 x x 105 x 50 1 E90 inside 520 x 300 x 130 (13 strips) Note The Hercules distribution box or cover E30-E90 can be used for all pyrofil Keram cable types (N)HXH/(N)HXCH FE 180/E30-E60, (N)HXH/(N)HXCH FE 180/E90, JE-H(ST)H FE180/E30-E90/ JE-H(ST)HRH FE180/E30-E90. Function Connections and branches of power current and low current. Please remember that due to the selectivity of safety circuits or in the case of a decrease in cross section, a corresponding circuit breaker must be installed. Installation The time required for assembly of the E30-E90 Hercules distribution box or cover is around 10 minutes. The screws are screwed into a predrilled hole without plugs. The cable inlets and outlets are sealed with the pyroplast S 100 SM-K fire protection filler. The cables do not not need to be tied. 22 Technical changes reserved.

23 Connection / terminal box Distribution box E30-E90 Fuse element for VAD 2 VAD E30 - E90 AD E30 Connection / terminal box E30-E90 Connection / terminal box. Tested on the basis of DIN , circuit integrity class E30. Goods supplied Halogen-free plastic box, cable glands, ceramic clamps, mounting rail and fire protection plugs. Technical Data Material Halogen-free special compound, fail-safe Colour orange Protection class IP 54 Accessories Fuse element for VAD 2 Technical Data AC 230V-Fuseholder 5 x 20 mm with 2A fuse. Distribution box E30 AD E30 Branch, connection or terminal box. Tested on the basis of DIN , circuit integrity class E30. Goods supplied Mounting rail for feedthrough terminals, cable glands on request. Function Distribution box for emergency lighting or alarm systems. Connection box, eg. for smoke and heat extraction systems in damp areas (underground car parks, industry, etc.) Technical Data Material Halogen-free, fire resistant special compound Systems test In accordance with DIN circuit integrity class E30 Wiring assembly on customers request Cable inlets Available in various configurations Colour Orange Protection class IP 54 Connection / terminal box VAD E30 E90 Article Type Outer dimensions Dimensions PU No. [mm] [mm 2 ] VAD 2 5x6 100 x 100 x 50 5 x 0,5-6 1 E30-E VAD 2 3x x 100 x 50 3 x 1, E30-E90 Accessories Article Description/ Accessorie Dimensions PU No. [mm] AC 230V-Fuseholder 5 x 20 mm 40 x 20 x 20 1 Distribution box AD E30 Article Type Outer dimensions Dimensions PU No. [mm] [mm 2 ] on request AD E x 130 x mm 2 1 on request AD E x 160 x mm 2 1 on request AD E x 200 x mm 2 1 on request AD E x 400 x mm 2 1 (twin-box, 6 inlets) Technical changes reserved. 23