SPECIAL ELECTRICAL AND OPTICAL CABLES

Transcription

1

2 SPECIAL ELECTRICAL AND OPTICAL CABLES

3

4 INTRODUCTION The new high-speed trains and the sensible increase of the traffic, with congested lines, is the result of the latest development of the rail sector. As a result, the need for high safety standards for the rail transport has become more critical and drew the attention of the Transportation sector. In order to provide users with high standards and a reliable service, the industry has focused its efforts on the development of the signalling equipment, handling the exchange of information between the system and the moving vehicle. We engineer and manufacture copper and fiber optic cables for the entire range of the signalling systems adopted by both the mass transit and high-speed lines. Our different product lines meet system requirements of the whole Industry; our cables are specially designed for any specific application, being indoor/outdoor, aerial, directly buries or in-duct. We constantly focus our efforts on satisfying the transportation requirements in terms of construction, and stand out in the market for our expertise in the product engineering according with any specific requirement. Our production range includes a wide range of products suitable for: - Tunnel installation and indoor environments. This is achieved by our LZH non-propagating compounds which satisfy the severe international standards - Security Systems. Our Fire resistant cables guarantee a steady supply of the system, even in the event of a fire. - High mechanical stress. Our cables can withstand heavy loads and severe environmental conditions, such as Arctic temperatures and High Magnetic Interferences Our cables are the result of broad enthusiasm, constant research and deep expertise, always aiming at the full satisfaction of our customers, an endless improvement of the comfort and the safety in the rail transportation. PRODUCT LINES

5 TECNIKABEL is focused on constant product innovation to get competitive advantages with endless commitment to research and development. PRODUCTION Updated production Systems, stringent process procedures and expert operators reached the goal to carry out our production efficient and flexible. In years of activity, we produced more than 6. different types of cables. FINAL INSPECTIONS At the end of every production process each cable is checked in its electrical and physical performances for a complete compliance to customer specifications. LABORATORY TESTS We submit our cables to the most severe tests, simulating critical applications. In addition to the tests required by current norms, we invest on new special equipment for additional mechanical and electrical testing, heading to a steady increase of standard performance of our cables. MATERIALS RESEARCH AND DEVELOPMENT Our thirty year experience took us to carry on research of new materials in order to improve performances, costs and fulfill the standards required by our customers.

6 QUALITY SYSTEM Since 978, constant commitment to Quality has awarded Tecnikabel approval from American and European Authorities, complying with the most demanding international manufacturing and quality standards. ISO 9:8 95 TEKA 5

7 INDEX SCMT EUROBALISE - TRACKSIDE SUBSYSTEM CABLES... TK-SCMT-SST ENCODER BOA xx TK-SCMT-SST xx...6 TK-SCMT-SST xx TK-BOA EUROBALISE xx...8 TK-CDB AUDIOFREQUENCY MULTIPAIRS...9 TK-EUROBALISE TUNNEL MULTIPAIRS.9... TK-EUROBALISE MULTIPAIRS.9... TELECOMMUNICATION CABLES... 5 TK-TELEPHONE MULTIPAIRS TK-TRAIN DETECTION x...7 TK-CANCABLE xx...8 TK-UNBALANCED CURRENT SENSOR xx TK-TELEPHONE MULTIQUADS.7... TK-TELEPHONE MULTIQUADS.9/... TK-PZB INDUSI AUTOMATIC TRAIN CONTROL x TK-ARMOURED PZB INDUSI AUTOMATIC TRAIN CONTROL x SIGNALLING CABLES... 7 TK-H5 SIGNAL MULTICONDUCTORS - REDUCTION FACTOR...8 TK-H7 SIGNAL MULTICONDUCTORS - REDUCTION FACTOR... TK-H7 SIGNAL MULTIPAIRS - REDUCTION FACTOR... TK-CW SIGNAL MULTIQUADS - REDUCTION FACTOR... TK-9 SIGNAL...6 TK-ARMOURED 9 SIGNAL...8 TK-POINT MACHINE...5 OPTICAL CABLES... 5 TK-BCA FIBER OPTIC TRAIN DETECTION...5 TK-UT9X ARMOURED UNITUBE...56 TK-UTXD ARMOURED UNITUBE DOUBLE SHEATH...58 TK-MT9X ARMOURED MULTITUBE...6 TK-API AIRBAG PROTECTION...6 TK-MT6X ARMOURED MULTITUBE...66 TK-MTAS MULTITUBE ADSS

8 SYMBOLS ENVIRONMENTAL PROPERTIES FLAME RETARDANT SINGLE WIRE (EN/IEC 6--, EN 565--) FLAME RETARDANT BUNCHED WIRES (IEC 6-, EN , EN 559-, EN , EN 566-) ANTIBALLISTIC PROTECTION UV RESISTANT FIRE RESISTANCE (IEC 6, EN5, EN 56, BS687 CWZ) REDUCED EMISSION OF FUMES AND TOXIC GASES (IEC 675-; EN 567--/, EN 55 9.) ARCTIC CABLE INDOOR/OUTDOOR SMOKE DENSITY (EN/IEC 6-/) (EN 568-; EN 568-/) REDUCTION FACTOR LOW ACIDITY AND CORROSIVITY OF EVOLVED GASES (IEC 675-, EN 567--) CHEMICAL PROPERTIES WEATHERING TEST RESISTANCE (OUTDOOR) MUD RESISTANCE INDOOR MINERAL OIL RESISTANCE WATER RESISTANCE HYDROCARBONS RESISTANCE RODENT RESISTANCE PVC PVC VERSION HAZARDOUS AREA MECHANICAL PROPERTIES FLEXIBLE INSTALLATION MECHANICAL RESISTANCE FULLY DIELECTRIC REDUCED BENDING RADIUS DIRECT BURIAL WORK AT LOW TEMPERATURE 7

9

10 FIRE PERFORMANCES 9

11 IEC 6-- / EN 565: Fire propagation on a vertical single cable. The single cable is mounted vertically and flamed with a Bunsen burner. The flame must extinguish itself, at least 5 mm below the upper fixing clamp. Temperature of burner, duration and angle of flame application, are described in the reference standards. IEC 6- / EN 566 / EN : Fire propagation on a vertical cables bundle. A certain number of cable samples are fixed on a.5m long ladder, and flamed with an appropriate burner. The samples number, the duration of flame application, and the power/temperature of burner are described in the reference standards. After flame application, the visible area of fire damage must not exceed.5 m in height from the bottom of the burner. The volume of tested material define a differentiation in categories: A/FR Part - 7 l/m A Part - 7 l/m B Part -.5 l/m C Part -.5 l/m D Part -5.5 l/m IEC 6 / EN 5 / EN 56 : Fire test resistance. A sample of cable is horizontally applied supported by metal rings, or in U shape fixed on a fireproof wall. Through using a gas burner the cable It s maintained in flame contact for a certain time. The test and the temperature of burner are described in the reference standards. In U shape test, the fireproof wall is hit every five minutes by a mechanical shock, to simulate a potential collapse during the fire. The time of fire application, and the temperature of flame are described in the reference standards (typical 75 C or 8 C). During the test a current for continuity checking is passed through all conductors of the cable and the voltage must be maintained during the test duration.

12 IEC 6-/ / EN 568-/: Measurement of smoke density of cables burning under defined conditions. A few samples of cable are burnt in a cubic (xxm) chamber using a flammable liquid. The light transmittance of the resulting smoke is measured using an optical light detector. The test duration is about minutes, depending by the quantity and composition of the liquid fuel. At the end of the test the light transmittance of the smoke must be 6% minimum. IEC 675- / EN 567--/: Test on gases evolved during combustion of materials from cables - Determination of the halogen acid gas content. This standard covers the general aspects of potential hazard caused from corrosiveness of smoke and combustion gases. A small quantity of non-metallic material is heated in a tube, the resulting gases are tested for their halogen content. The flame temperature is 8 C ± C, with a test duration of ± 5 min in total. The halogen content of non-metallic materials must be less than.5% or 5 mg/g. IEC 675- / EN 567--: Test on gases evolved during combustion of materials from cables - Determination of acidity (by ph measurement) and conductivity. A small quantity of non-metallic material is burnt in a furnace, the ph and conductivity combustion gases dissolved in water are measured. The minimum ph value of the washing water must., and the maximum conductivity must be μs/mm.

13 Construction products regulation Regulation No. 5/ (Construction Products Regulation, or CPR) of the European Parliament and of the European Council is a regulation of 9 March that lays down harmonised conditions for the marketing of construction products and replaces Construction Products Directive (89/6/EEC). The EU regulation is designed to simplify and clarify the existing framework for the placing on the EU market of construction products. The main objective of the CPR is the removal of technical barriers to trade in order to guarantee the free movement of construction products within the common internal market due to differing product and test standards, approval processes and conformity documents in the various member states. After the transition period, which ended on July 7, the Construction Products Regulation governs cables intended to be incorporated in construction works (permanent installations) in both buildings and civil engineering. CPR Euroclasses are: Aca, Bca, Bca, Cca, Dca, Eca, Fca. Aca Bca Bca Cca Dca Eca Fca Furthermore, there are additional criteria establishing requirements on the amount of smoke produced, the fall of droplets and flamed particles during combustion, and acid content or toxicity of smoke produced. s = smoke production. With decreasing performance, varies from s to s. Furthermore, s classification can be classified as s, sa or sb on the basis of smoke opacity. d = flaming droplets. With decreasing performance, varies from d to d a = smoke acidity. With decreasing performance, varies from a to a The DoP (Declaration of Performance) is a document issued by the manufacturer in which all relevant information is recorded: the manufacturer, cable identification, evaluation system used, applicable standard, CPR certification body and performance of the product. We are committed to adopting Euroclasses, and their relevant DoP, to express the fire performance of our products for the different construction applications, even if incumbent operators specifications eventually conflict with the CPR Regulations.

14 scmt eurobalise - trackside subsystem cables The images are for illustrative purposes only

15 TK-SCMT-SSt encoder boa xx.9 CABLE SPECIFICATIONS Conductor Insulation Pair Total Assembling Armouring Solid bare copper,.9 mm Coloured Polyethylene Two conductors assembled to form a pair N pairs assembled together with eventual filler and tape Corrugated steel tape thermowelded to outer sheath Green flame retardant, low smoke and halogen-free compound or black Polyethylene PVC TECHNICAL DATA Operating temperature Minimum bending radius - C + 7 C xø FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Only for PE version Only for LSZH version Test voltage Characteristic to 5 KHz Mutual 8 Hz Capacitance unbalance Max to 5 KHz V DC x minute ± Ω 5 pf/m pf/5m db/km UV resistant Arctic cables Indoor/Outdoor Oil resistant PVC version

16 TK-SCMT-SSt encoder boa xx.9 Formation Conductor Resistance of C MAIN FEATURES Insulation C thickness Ø (n of pairs) (mm) (Ω/km) (GΩxkm) (mm) (mm) (kg/km) Nominal weight PE LSZH (kg/km)

17 TK-SCMT-SSt xx. CABLE SPECIFICATIONS Conductor Insulation Assembling Screen and moisture barrier Inner sheath Armouring Outer diameter Solid bare copper,. mm Coloured foam Polyolefin Two conductors assembled to form a pair with eventual filler and tape Aluminium/PE/tape thermowelded to inner sheath + drain wire Flame retardant, low smoke and halogen-free compound or Polyethylene Two steel tapes helically applied Green flame retardant, low smoke and halogen-free compound or black Polyethylene.8 mm TECHNICAL DATA Operating temperature Minimum bending radius - C + 7 C xø PVC FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Only for PE version Only for LSZH version Resistance of C Insulation C Test voltage Characteristic impedance Mutual 8 Hz Capacitance unbalance Max attenuation KHz. Ω/km GΩ x km V AC x minute Ω Ω 5 pf/m pf/km.9 db/km 5.5 db/km.6 μh/m.5 μh/m Nominal weight 85 kg/km kg/km 6 Filling compound UV resistant Arctic cables Indoor/Outdoor Reduction factor Oil resistant PVC version

18 TK-SCMT-SSt xx.6 CABLE SPECIFICATIONS Conductor Insulation Assembling Inner sheath Screen and moisture barrier Intermediate sheath Armouring Outer diameter Solid bare copper,.6 mm Coloured foam Polyolefin Two conductors assembled to form a pair with filler and tape Natural Polyethylene Aluminium/PE/tape thermowelded to intermediate sheath + drain wire Flame retardant, low smoke and halogen-free compound or Polyethylene Two steel tapes helically applied Black flame retardant, low smoke and halogen-free compound or black Polyethylene 6.5 mm TECHNICAL DATA Operating temperature Minimum bending radius - C + 7 C xø PVC FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Only for PE version Only for LSZH version Resistance of C Insulation C Test voltage Characteristic impedance Mutual 8 Hz Capacitance unbalance Max attenuation KHz 9. Ω/km GΩ x km V AC x minute Ω Ω 9 pf/m pf/km.7 db/km.8 db/km.65 μh/m.5 μh/m Nominal weight kg/km 6 kg/km Filling compound UV resistant Arctic cables Indoor/Outdoor Reduction factor Oil resistant PVC version 7

19 TK-boa EUROBALISE xx. CABLE SPECIFICATIONS Conductor Insulation Assembling Screen and moisture barrier Inner sheath Armouring Outer diameter Solid Bare Copper,. mm Coloured Polyethylene Two conductors assembled to form a pair with eventual filler and tape Aluminium/PE/tape thermowelded to inner sheath Flame retardant, low smoke and halogen-free compound or Polyethylene Corrugated steel tape thermowelded to outer sheath Green flame retardant, low smoke and halogen-free compound or black Polyethylene mm PVC TECHNICAL DATA Operating temperature Minimum bending radius - C + 7 C xø FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Resistance of C.5 Ω/km Only for PE version Only for LSZH version Insulation resistance Test C GΩ x km 5 V DC x minute Characteristic MHz 5 Ω Mutual 8 Hz pf/m Max KHz.7 db/km 7. db/km 9.5 db/km Nominal weight 6 kg/km kg/km Filling compound UV resistant Arctic cables Indoor/Outdoor Oil resistant PVC version 8

20 TK-CDB AUDIOFREQUENCY multipairs. CABLE SPECIFICATIONS Conductor Insulation Assembling Inner sheath Screen and moisture barrier Intermediate sheath Armouring Outer diameter Solid bare copper,. mm Solid Bare Copper,.6 mm (Service pair) Coloured Polyethylene One or two pairs + service pair assembled together Polyethylene Aluminium/PE/tape thermowelded to intermediate sheath Flame retardant, low smoke and halogen-free compound or Polyethylene Two steel tapes helically applied Green flame retardant, low smoke and halogen-free compound or black Polyethylene 7 mm ( pair) mm ( pairs) PVC TECHNICAL DATA Operating temperature Minimum bending radius - C + 7 C 6xØ FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Only for PE version Only for LSZH version Resistance of C Insulation C Test voltage Characteristic KHz Mutual 8 Hz Capacitance unbalance Max attenuation Nominal weight Reduction KHz. Ω/km 5 GΩ x km V DC x minute Ω 5 pf/m pf/5m.76 db/km.5 db/km 8 kg/km ( pair) 5 kg/km ( pairs) 7 kg/km ( pair) 58 kg/km ( pairs).8 Filling compound UV resistant Arctic cables Indoor/Outdoor Oil resistant PVC version 9

21 TK- eurobalise TUNNEL multipairs.9 CABLE SPECIFICATIONS Conductor Insulation Filling Pair Total Assembling Screen and moisture barrier Inner sheath Solid bare copper,.9 mm Coloured Polyethylene Waterblock yarn (dry core) conductors assembled to firm a pair N pairs assembled together with eventual filler and tape Aluminium/PE/tape thermowelded to outer sheath + drain wire Green flame retardant, low smoke and halogen-free compound Green flame retardant, low smoke and halogen-free compound TECHNICAL DATA Operating temperature Minimum bending radius - 5 C + 7 C xø FIRE PERFORMANCE Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Test voltage 5 V DC x minute Characteristic MHz Mutual 8 Hz Max 8.8 KHz 5 Ω 5 pf/m.7 db/km. db/km db/km UV resistant Arctic cables Indoor/Outdoor Oil resistant

22 TK- eurobalise TUNNEL multipairs.9 MAIN FEATURES Formation Conductor Resistance of C Insulation C thickness Ø (n of pairs) (mm) (Ω/km) (GΩxkm) (mm) (mm) Nominal weight LSZH (kg/km) 8 5

23 TK- eurobalise multipairs.9 PVC CABLE SPECIFICATIONS Conductor Insulation Filling Pair Total Assembling Screen and moisture barrier Inner sheath Armouring Solid bare copper,.9mm Coloured foam Polyethylene Petroleum jelly Two conductors assembled to form a pair N pairs assembled together with eventual filler and tape Aluminium/PE/tape thermowelded to inner sheath + drain wire Flame retardant, low smoke and halogen-free compound or Polyethylene Corrugated steel tape thermowelded to outer sheath Green flame retardant, low smoke and halogen-free compound of black Polyethylene TECHNICAL DATA Operating temperature Minimum bending radius - C + 7 C xø FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Test voltage 5 V DC x minute Only for PE version Only for LSZH version Characteristic MHz Mutual 8 Hz Max 8.8 KHz 5 Ω 5 pf/m.7 db/km. db/km db/km UV resistant Arctic cables Indoor/Outdoor Oil resistant PVC version

24 TK- eurobalise multipairs.9 Formation Conductor Resistance of C MAIN FEATURES Insulation C thickness Ø (n of pairs) (mm) (Ω/km) (GΩxkm) (mm) (mm) (kg/km) Nominal weight PE LSZH (kg/km) 9 5

25 NOTE

26 telecommunication cables

27 TK-Telephone multipairs.7 CABLE SPECIFICATIONS Conductor Insulation Pair Total Assembling Screen Solid bare copper,.7 mm Coloured Polyethylene conductors assembled to form a pair pairs assembled together with eventual filler and tape Aluminium tape + drain wire Armouring Outer diameter Corrugated steel tape thermowelded to outer sheath Green flame retardant, low smoke and halogen-free or black Polyethylene.5 mm PVC TECHNICAL DATA Operating temperature Minimum bending radius - C + 7 C 5xØ FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Only for PE version Only for LSZH version Resistance of C Insulation C Test voltage Mutual 8 Hz Capacitance unbalance Nominal weight 7 Ω/km 5 GΩ x km V AC x minute 5 pf/m 6 pf/5m 5 kg/km 8 kg/km UV resistant Arctic cables Indoor/Outdoor Oil resistant PVC version 6

28 TK-train detection x. CABLE SPECIFICATIONS Conductor Insulation Assembling Screen Inner sheath Armouring Outer diameter Solid bare copper,. mm Coloured foam Polyolefin conductors assembled together to form a star quad Corrugated copper tape Flame retardant, low smoke and halogen-free compound or Polyethylene Two steel tapes helically applied Green flame retardant, low smoke and halogen-free compound or black Polyethylene 7.5 mm PVC TECHNICAL DATA FIRE PERFORMANCE Only for LSZH version Operating temperature Minimum bending radius Fire propagation Smoke density Halogen-free Fumes - C + 7 C xø IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Resistance of C. Ω/km Only for PE version Only for LSZH version Insulation C Test voltage Mutual 8 Hz Capacitance unbalance Max attenuation Nominal weight Reduction 5 5 KHz GΩ x km 5 V DC x minute pf/m 5 pf/5m.6 db/km.85 db/km 5 kg/km 6 kg/km. Filling compound UV resistant Arctic cables Indoor/Outdoor Oil resistant PVC version 7

29 TK-CANCABLE xx. PVC CABLE SPECIFICATIONS TECHNICAL DATA Conductor Insulation Conductor communication core Insulation communication core Assembling Operating temperature Minimum bending radius Stranded bare copper,. mm Coloured foam Polyolefin Stranded bare copper,.5 mm Coloured Polyethylene Two pairs + communication core assembled together + drain wire Screen Aluminium or Aluminium/Polyester + drain wire Armouring Corrugated steel tape thermowelded to outer sheath Black flame retardant, low smoke and halogen-free or Polyethylene Outer diameter 6 mm - C + 7 C xø FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Resistance of C. Ω/km Resistance unbalance % Only for PE version Only for LSZH version Insulation C Test voltage Mutual 8 Hz Max 6 KHz Nominal weight 5 MΩ x km V DC x minute 75 pf/m.88 db/km 7 kg/km kg/km Filling compound UV resistant Arctic cables Indoor/Outdoor Oil resistant PVC version 8

30 TK-unbalanced current sensor xx.9 PVC CABLE SPECIFICATIONS Conductor Insulation Pair Pair screen Total Assembling Screen and moisture barrier Inner sheath Armouring Outer diameter Solid bare copper,.9 mm Coloured Polyethylene conductors assembled to form a pair Aluminium/PE tape + drain wire pairs assembled together with eventual filler and tape Aluminium/PE tape thermowelded to inner sheath Flame retardant, low smoke and halogen-free or Polyethylene Steel wire armour (SWA) Green flame retardant, low smoke and halogen-free or black Polyethylene 9 mm TECHNICAL DATA Operating temperature Minimum bending radius - C + 7 C xø FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Only for PE version Only for LSZH version Resistance of C Insulation C Test voltage Characteristic KHz Mutual 8 Hz Max KHz 8. Ω/km GΩ x km V AC x minute Ω 56 pf/m.8 db/km Nominal 8 Hz 7 kg/km 5 kg/km Arctic cables Indoor/Outdoor Oil resistant PVC version 9

31 TK- telephone multiquads.7 CABLE SPECIFICATIONS Conductor Insulation Quad Total Assembling Armouring Solid bare copper,.7 mm Coloured Polyethylene conductors assembled together to form a star quad + service quad N star quads assembled with eventual filler and tape Aluminium welded, thickness.mm Green flame retardant, low smoke and halogen-free compound or black Polyethylene PVC TECHNICAL DATA Operating temperature Minimum bending radius - C + 7 C xø FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Test voltage Mutual 8 Hz Capacitance unbalance V AC x minute 8.5 pf/m 8 pf/5m Only for PE version Only for LSZH version UV resistant Arctic cables Indoor/Outdoor Oil resistant PVC version

32 TK- telephone multiquads.7 MAIN FEATURES Formation (n of pairs) 5 Conductor Resistance of C Insulation C thickness Ø (mm) (Ω/km) (GΩxkm) (mm) (mm) (kg/km) Nominal weight PE LSZH (kg/km)

33 TK- telephone multiquads.9/ CABLE SPECIFICATIONS Conductor Insulation Quad Total Assembling Armouring Solid bare copper,.9mm/mm Coloured foam Polyolefin conductors assembled together to form a star quad + service quad N star quads assembled with eventual filler and tape Aluminium welded, thickness.mm Green flame retardant, low smoke and halogen-free compound or black Polyethylene PVC TECHNICAL DATA Operating temperature Minimum bending radius - C + 7 C xø FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Test voltage Mutual 8 Hz Capacitance unbalance V AC x minute pf/m (.9 mm) 8.5 pf/m ( mm) 8 pf/5m Only for PE version Only for LSZH version UV resistant Arctic cables Indoor/Outdoor Oil resistant PVC version

34 TK- telephone multiquads.9/ MAIN FEATURES Formation (n of pairs) 5 5 Conductor Resistance of C Insulation C thickness Ø (mm) (Ω/km) (GΩxkm) (mm) (mm) (kg/km) Nominal weight PE LSZH (kg/km)

35 TK-PZB indusi Automatic train control x.75 CABLE SPECIFICATIONS Conductor Insulation Assembling Inner sheath Screen and moisture barrier Outer diameter Stranded bare copper,.75 mm Coloured Polyethylene conductors assembled together to form a star quad with eventual filler and tape Flame retardant, low smoke and halogen-free or Polyethylene Aluminium/PE/tape thermowelded to outer sheath Green flame retardant, low smoke and halogen-free or black Polyethylene.5 mm PVC TECHNICAL DATA Operating temperature Minimum bending radius - C + 8 C xø Only for PE version Only for LSZH version FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Resistance of C Insulation C Test voltage Mutual 8 Hz 6 Ω/km 5 GΩ x km 5 V AC x minute 8 pf/m Nominal weight 8 kg/km 5 kg/km UV resistant Arctic cables Indoor/Outdoor Oil Resistant PVC version

36 TK-armoured PZB INDUSI Automatic train control x.8 CABLE SPECIFICATIONS Conductor Insulation Assembling Screen and moisture barrier Inner sheath Armouring Outer diameter Solid bare copper,.8 mm Coloured Foam Polyolefin conductors assembled together to form a star quad with eventual filler and tape Aluminium/PE/tape thermowelded to inner sheath Flame retardant, low smoke and halogen-free or Polyethylene Two steel tapes helically applied Green flame retardant, low smoke and halogen-free or black Polyethylene 5 mm PVC TECHNICAL DATA Operating temperature Minimum bending radius - C + 8 C xø FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Resistance of C 8 Ω/km Insulation C Test voltage Mutual 8 Hz 5 GΩ x km 5 V AC x minute pf/m Only for PE version Only for LSZH version Nominal weight 5 kg/km kg/km UV resistant Arctic cables Indoor/Outdoor Reduction factor Oil resistant PVC version 5

37 NOTE

38 signalling cables

39 TK- h5 signal multiconductors - reduction factor CABLE SPECIFICATIONS Conductor Insulation Assembling Screen and moisture barrier Inner sheath Armouring Solid bare copper Black numbered Polyethylene N conductors assembled together with eventual filler and tape Aluminium/PE/tape thermowelded to inner sheath Flame retardant, low smoke and halogen-free or Polyethylene Two steel tapes helically applied Green flame retardant, low smoke and halogen-free or black Polyethylene TECHNICAL DATA Operating temperature Minimum bending radius - C + 7 C xø PVC FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Test voltage 5 V DC x minute Mutual 8 Hz Reduction Hz 65 pf/m. Only for PE version Only for LSZH version Filling compound UV resistant Arctic cables Indoor/Outdoor Oil resistant PVC version 8

40 TK- h5 signal multiconductors - reduction factor Formation Conductor Resistance of C MAIN FEATURES Insulation C thickness Ø (n of conductors) (mm) (Ω/km) (GΩxkm) (mm) (mm) (kg/km) Nominal weight PE LSZH (kg/km)

41 TK- h7 signal multiconductors - reduction factor CABLE SPECIFICATIONS Conductor Insulation Assembling Screen Inner sheath Armouring Solid bare copper,.9mm/.mm Black numbered Polyethylene N conductors assembled with eventual filler and tape Corrugated copper tape Flame retardant, low smoke and halogen-free or Polyethylene Two steel tapes helically applied Green flame retardant, low smoke and halogen-free or black Polyethylene PVC TECHNICAL DATA FIRE PERFORMANCE Only for LSZH version Operating temperature Minimum bending radius Fire propagation Smoke density Halogen-free Fumes - C + 7 C xø IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Test voltage 5 V DC x minute Mutual 8 Hz Max attenuation Reduction Hz 5 pf/m.7 db/km (.9 mm).6 db/km (.9 mm).6 db/km (. mm).85 db/km (. mm). Only for PE version Only for LSZH version UV resistant Arctic cables Indoor/Outdoor Oil resistant PVC version

42 TK- h7 signal multiconductors - reduction factor MAIN FEATURES Formation (n of conductors) Conductor Resistance of C Insulation C thickness Ø (mm) (Ω/km) (GΩxkm) (mm) (mm) (kg/km) Nominal weight PE LSZH (kg/km)

43 TK- h7 signal multipairs - reduction factor CABLE SPECIFICATIONS Conductor Insulation Pair Total assembling Inner sheath Screen Intermediate sheath Armouring Solid bare copper Coloured Polyethylene conductors assembled together to form a pair N pairs assembled with eventual filler and tape Flame retardant, low smoke and halogen-free or Polyethylene Corrugated copper tape Flame retardant, low smoke and halogen-free or Polyethylene Two steel tapes helically applied Green flame retardant, low smoke and halogen-free or black Polyethylene PVC TECHNICAL DATA Operating temperature Minimum bending radius - C + 7 C xø FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Only for PE version Only for LSZH version Test voltage Mutual 8 Hz Capacitance unbalance Max 5 KHz Characteristic 5 KHz Reduction - 5 Hz 5 V DC x minute 55 pf/m 65 pf/5m.5 db/km Ω. Filling compound UV resistant Arctic cables Indoor/Outdoor Oil resistant PVC version

44 TK- h7 signal multipairs - reduction factor Formation Conductor section Resistance of C MAIN FEATURES Insulation C thickness Ø (n of pairs) (mm ) (Ω/km) (GΩxkm) (mm) (mm) (kg/km) Nominal weight PE LSZH (kg/km)

45 TK- cw signal multiquads - reduction factor CABLE SPECIFICATIONS Conductor Insulation Quad Total assembling Screen and moisture barrier Inner sheath Concentric screen Armouring Solid bare copper Coloured Polyethylene conductors assembled together to form a star quad N star quads assembled together with eventual filler and tape Aluminium/PE/tape thermowelded to inner sheath Flame retardant, low smoke and halogen-free or Polyethylene One solid copper layer Two steel tapes helically applied Green flame retardant, low smoke and halogen-free or black Polyethylene PVC TECHNICAL DATA Operating temperature Minimum bending radius - C + 7 C xø FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Only for PE version Only for LSZH version Test voltage Mutual 8 Hz Capacitance unbalance Max 9 KHz Reduction Hz Filling compound UV resistant Arctic cables Indoor/Outdoor Oil resistant PVC version 5 V AC x minute 5 pf/m 65 pf/5m. db/km (.9 mm).6 db/km (. mm).

46 TK- cw signal multiquads - reduction factor Formation Conductor Resistance of C MAIN FEATURES Insulation C thickness Ø (n of quads) (mm) (Ω/km) (GΩxkm) (mm) (mm) (kg/km) Nominal weight PE LSZH (kg/km)

47 TK- 9 signal CABLE SPECIFICATIONS Conductor Insulation Assembling Inner sheath Solid tinned copper, section from to 6 mm Stranded copper, section from to 5 mm Extra-flexible copper, section.5 mm Coloured type crosslinked LSZH compound N conductors assembled with eventual filler and tape Type crosslinked LSZH Black crosslinked flame retardant, low smoke and halogen-free compound or black Polyethylene TECHNICAL DATA Operating temperature Minimum bending radius - C + 7 C 5xØ PVC FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes Only for PE version Only for LSZH version Filling compound UV resistant Arctic cables Indoor/Outdoor Oil resistant PVC version 6

48 TK- 9 signal MAIN FEATURES Formation (n of conductors) Conductor section Resistance of C Insulation C thickness Ø (mm ) (Ω/km) (MΩxkm) (mm) (mm) (kg/km) Nominal weight PE LSZH (kg/km)

49 TK- armoured 9 signal CABLE SPECIFICATIONS Conductor Insulation Assembling Inner sheath Intermediate sheath Armouring Solid tinned copper, section from to 6 mm Stranded copper, section from to 5 mm Extra-flexible copper, section.5 mm Coloured type crosslinked LSZH compound N conductors assembled with eventual filler and tape Type crosslinked LSZH compound Type crosslinked LSZH compound Two steel tapes helically applied Black flame retardant, low smoke and halogen-free compound or black polyethylene TECHNICAL DATA Operating temperature Minimum bending radius - C + 7 C xø PVC FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes Filling compound UV resistant Arctic cables Indoor/Outdoor Reduction factor Oil resistant PVC version Only for PE version Only for LSZH version 8

50 TK- armoured 9 signal MAIN FEATURES Formation (n of conductors) Conductor Resistance of C Insulation C thickness Ø (mm) (Ω/km) (MΩxkm) (mm) (mm) (kg/km) Nominal weight PE LSZH (kg/km)

51 TK- point machine CABLE SPECIFICATIONS Conductor Insulation Assembling Screen Inner sheath Armouring Solid bare copper Black numbered Polyethylene 5 conductors assembled with eventual filler and tape Corrugated copper tape Flame retardant, low smoke and halogen-free or Polyethylene Two steel tapes helically applied Green flame retardant, low smoke and halogen-free or black Polyethylene PVC TECHNICAL DATA Operating temperature Minimum bending radius - C + 7 C xø FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes MAIN FEATURES Test voltage 5 V AC x 5 minute Mutual Hz 5 pf/m Max KHz. db/km (.5 mm KHz.8 db/km (.5 mm KHz. db/km ( mm KHz.78 db/km ( mm KHz. db/km (6 mm KHz.78 db/km (6 mm ) Reduction 5 Hz. Only for PE version Only for LSZH version Arctic cables Indoor/Outdoor Reduction factor Oil resistant PVC version 5

52 TK- point machine MAIN FEATURES Formation (n of conductors) Conductor section Resistance of C Insulation C thickness Ø (mm ) (Ω/km) (GΩxkm) (mm) (mm) (kg/km) Nominal weight PE LSZH (kg/km) 8 5

53 NOTE

54 OPTICAL cables

55 TK-BCA fiber optic train detection CABLE SPECIFICATIONS Fiber structure Tight colour code Assembling Protection Inner sheath Armouring Tight buffer 9 μm Semitight buffer 9 μm See table C fibers Aramidic yarns Flame retardant, low smoke and halogen-free Corrugated steel tape thermowelded to outer sheath Flame retardant, low smoke and halogen-free All cables are available with all type of fibers. TECHNICAL DATA Operating temperature Minimum bending radius - C + 8 C xø FIRE PERFORMANCE Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes Water resistant Polyethylene sheath for direct buried UV resistant Arctic cables Indoor/Outdoor Oil resistance 5

56 TK-BCA fiber optic train detection MAIN FEATURES No. of fiber 8 Nominal Nominal weight Max pulling force Max crush Impact (mm) (kg/km) (N) (N/dm) (J)

57 TK- ut9x armoured unitube CABLE SPECIFICATIONS Fiber structure Fiber colour code Loose tube colour Assembling Protection Armouring Jelly filled loose tube See table A Natural fibers With or without Aramidic/Glass yarns Corrugated steel tape thermowelded to outer sheath Flame retardant, low smoke and halogen-free or Polyethylene All cables are available with all type of fibers. TECHNICAL DATA Operating temperature Minimum bending radius - C + 8 C xø FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes Fire resistant Water resistant UV resistant Arctic cables Indoor/Outdoor Oil resistance Only for PE version Only for LSZH version 56

58 TK- ut9x armoured unitube MAIN FEATURES CST + LSZH SHEATH No. of fiber Loose Cable Max pulling Nominal weight Max crush Impact force (mm) (mm) (kg/km) (N) (N/dm) (J) MAIN FEATURES CST + ARAMIDIC YARNS + LSZH SHEATH No. of fiber Loose Cable Max pulling Nominal weight Max crush Impact force (mm) (mm) (kg/km) (N) (N/dm) (J) MAIN FEATURES CST + GLASS YARNS + LSZH SHEATH No. of fiber Loose Cable Max pulling Nominal weight Max crush Impact force (mm) (mm) (kg/km) (N) (N/dm) (J).5 5 MAIN FEATURES CST + PE SHEATH No. of fiber Loose Cable Max pulling Nominal weight Max crush Impact force (mm) (mm) (kg/km) (N) (N/dm) (J) MAIN FEATURES CST + ARAMIDIC YARNS + PE SHEATH No. of fiber Loose Cable Max pulling Nominal weight Max crush Impact force (mm) (mm) (kg/km) (N) (N/dm) (J) MAIN FEATURES CST + GLASS YARNS + PE SHEATH No. of fiber Loose Cable Max pulling Nominal weight Max crush Impact force (mm) (mm) (kg/km) (N) (N/dm) (J)

59 TK- utxd armoured unitube Double sheath CABLE SPECIFICATIONS Fiber structure Fiber colour code Loose tube colour Assembling Strain relief Inner sheath Armouring Jelly filled loose tube See table A Natural fibers Aramidic/Glass yarns Flame retardant, low smoke and halogen-free or Polyethylene Galvanized steel wire braid or corrugated and thermowelded steel tape Flame retardant, low smoke and halogen-free or Polyethylene All cables are available with all type of fibers. TECHNICAL DATA Operating temperature Minimum bending radius - C + 8 C xø FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes Fire resistant Water resistant UV resistant Arctic cables Indoor/Outdoor Oil resistance Only for PE version Only for LSZH version 58

60 TK- utxd armoured unitube Double sheath MAIN FEATURES LSZH + GSWB + LSZH SHEATH No. of fiber Loose (mm).8.5 Cable Max pulling Nominal weight Max crush Impact force (mm) (kg/km) (N) (N/dm) (J) MAIN FEATURES PE + GSWB + PE SHEATH No. of fiber Loose (mm).8.5 Cable Max pulling Nominal weight Max crush Impact force (mm) (kg/km) (N) (N/dm) (J) MAIN FEATURES LSZH + CST + LSZH SHEATH No. of fiber Loose (mm).8.5 Cable Max pulling Nominal weight Max crush Impact force (mm) (kg/km) (N) (N/dm) (J) MAIN FEATURES PE + CST + PE SHEATH No. of fiber Loose (mm).8.5 Cable Max pulling Nominal weight Max crush Impact force (mm) (kg/km) (N) (N/dm) (J)

61 TK- Mt9x armoured multitube CABLE SPECIFICATIONS Fiber structure Fiber colour code Loose tube colour Assembling Central element Protection Armouring Jelly filled loose tube See table A See table B 6 loose tubes/fillers 88 fibers Fiber reinforced polymer With or without Aramidic/Glass yarns Corrugated steel tape thermowelded to outer sheath Flame retardant, low smoke and halogen-free or Polyethylene All cables are available with all type of fibers. TECHNICAL DATA Operating temperature Minimum bending radius - C + 8 C xø FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes Fire resistant Water resistant UV resistant Arctic cables Indoor/Outdoor Oil resistance Only for PE version Only for LSZH version 6

62 TK- Mt9x armoured multitube MAIN FEATURES CST + LSZH SHEATH No. of fiber Loose No. loose No. filler Cable Nominal weight Max pulling force Max crush Impact (mm) (mm) (kg/km) (N) (N/dm) (J) MAIN FEATURES ARAMIDIC + CST + LSZH SHEATH No. of fiber Loose No. loose No. filler Cable Nominal weight Max pulling force Max crush Impact (mm) (mm) (kg/km) (N) (N/dm) (J)

63 TK- Mt9x armoured multitube MAIN FEATURES GLASS YARNS + CST + LSZH SHEAT No. of fiber Loose No. loose No. filler Cable Nominal weight Max pulling force Max crush Impact (mm) (mm) (kg/km) (N) (N/dm) (J) MAIN FEATURES CST + PE SHEATH No. of fiber Loose No. loose No. filler Cable Nominal weight Max pulling force Max crush Impact (mm) (mm) (kg/km) (N) (N/dm) (J)

64 TK- Mt9x armoured multitube MAIN FEATURES ARAMIDIC + CST + PE SHEATH No. of fiber Loose No. loose No. filler Cable Nominal weight Max pulling force Max crush Impact (mm) (mm) (kg/km) (N) (N/dm) (J) MAIN FEATURES GLASS YARNS + CST + PE SHEATH No. of fiber Loose No. loose No. filler Cable Nominal weight Max pulling force Max crush Impact (mm) (mm) (kg/km) (N) (N/dm) (J)

65 TK- api airbag protection CABLE SPECIFICATIONS TECHNICAL DATA Fiber structure Fiber colour code Jelly filled loose tube See table A Loose tube color See table B Assembling 8 loose tubes/fillers 6 96 fibers Central element Fiber reinforced polymer Inner sheath Flame retardant, low smoke and halogen-free or Polyethylene Mechanical protection Dielectric layer Armouring Anti rodent glass protection Flame retardant, low smoke and halogen-free or Polyethylene All cables are available with all type of fibers. Operating temperature Minimum bending radius - C + 8 C 5xØ FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes Fire resistant UV resistant Arctic cables Indoor/Outdoor Oil resistance Only for PE version Only for LSZH version 6

66 TK- api airbag protection MAIN FEATURES LSZH + AIRBAG + GLASS TAPE AND YARNS + LSZH SHEATH No. of fiber Loose No. loose No. filler Cable Nominal weight Max pulling force Max crush Impact (mm) (mm) (kg/km) (N) (N/dm) (J) MAIN FEATURES PE + AIRBAG + GLASS TAPE AND YARNS + PE SHEATH No. of fiber Loose No. loose No. filler Cable Nominal weight Max pulling force Max crush Impact (mm) (mm) (kg/km) (N) (N/dm) (J)

67 TK- mt6x armoured multitube CABLE SPECIFICATIONS Fiber structure Fiber colour code Jelly filled loose tube See table A Loose tube color See table B Assembling 8 loose tubes/fillers 6 96 fibers Central element Fiber reinforced polymer Inner sheath Flame retardant, low smoke and halogen-free or Polyethylene Strain relief Aramidic layer Armouring Welded and corrugated steel tape (H6) Anticorrosion protection Bituminous/Jelly layer Flame retardant, low smoke and halogen-free or Polyethylene All cables are available with all type of fibers. TECHNICAL DATA Operating temperature Minimum bending radius - C + 8 C 5xØ FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes Fire resistant UV resistant Arctic cables Indoor/Outdoor Oil resistance Only for PE version Only for LSZH version 66

68 TK- mt6x armoured multitube MAIN FEATURES LSZH + ARAMIDIC YARNS + H6 + LSZH SHEATH No. of fiber Loose No. loose No. filler Cable Nominal weight Max pulling force Max crush Impact (mm) (mm) (kg/km) (N) (N/dm) (J) MAIN FEATURES PE + ARAMIDIC YARNS + H6 + PE SHEATH No. of fiber Loose No. loose No. filler Cable Nominal weight Max pulling force Max crush Impact (mm) (mm) (kg/km) (N) (N/dm) (J)

69 TK- Mtas multitube adss CABLE SPECIFICATIONS Fiber structure Fiber colour code Loose tube color Assembling Central element Inner sheath *Antiballistic protection Strain relief Jelly filled loose tube See table A See table B 6 loose tubes/fillers 88 fibers Fiber reinforced polymer Flame retardant, low smoke and halogen-free or Polyethylene Aramidic tapes or glass flats Aramidic layer Flame retardant, low smoke and halogen-free or Polyethylene * On request. All cables are available with all type of fibers. TECHNICAL DATA Operating temperature Minimum bending radius - C + 8 C 5xØ FIRE PERFORMANCE Only for LSZH version Fire propagation Smoke density Halogen-free Fumes IEC 6-- IEC 6-- IEC 6-/ IEC 675-/ No corrosive and toxic fumes Only for PE version Only for LSZH version Fire resistant Water resistant UV resistant Arctic cables Indoor/Outdoor Oil resistance 68

70 TK- Mtas multitube adss MAIN FEATURES LSZH + ARAMIDIC YARNS + LSZH SHEATH No. of fiber Loose No. loose No. filler Cable Nominal weight Max pulling force Max crush Impact (mm) (mm) (kg/km) (N) (N/dm) (J) MAIN FEATURES LSZH +ARAMIDIC YARNS AND TAPES + LSZH SHEATH No. of fiber Loose No. loose No. filler Cable Nominal weight Max pulling force Max crush Impact (mm) (mm) (kg/km) (N) (N/dm) (J)

71 TK- Mtas multitube adss MAIN FEATURES LSZH + ARAMIDIC YARNS + GLASS FLAT + LSZH SHEATH No. of fiber Loose No. loose No. filler Cable Nominal weight Max pulling force Max crush Impact (mm) (mm) (kg/km) (N) (N/dm) (J) MAIN FEATURES PE + ARAMIDIC YARNS + PE SHEATH No. of fiber Loose No. loose No. filler Cable Nominal weight Max pulling force Max crush Impact (mm) (mm) (kg/km) (N) (N/dm) (J)

72 TK- Mtas multitube adss MAIN FEATURES PE + ARAMIDIC YARNS AND TAPES + PE SHEATH No. of fiber Loose No. loose No. filler Cable Nominal weight Max pulling force Max crush Impact (mm) (mm) (kg/km) (N) (N/dm) (J) MAIN FEATURES PE +ARAMIDIC YARNS + GLASS FLAT + PE SHEATH No. of fiber Loose No. loose No. filler Cable Nominal weight Max pulling force Max crush Impact (mm) (mm) (kg/km) (N) (N/dm) (J)

73 FIBER CHARACTERISTICS SINGLEMODE FIBER PROPERTIES Mode Field nm 9, ±, μm 9, ±, μm 8,6 ±, μm 8,8 ±, μm Mode Field 55 nm, ±,5 μm, ±,5 μm 9,8 ±,5 μm 9,6 ±, μm Cladding diameter 5, ±,7 μm 5, ±,7 μm 5, ±,7 μm 5, ±,7 μm 5, ±,7 μm Coating diameter ± 7 μm ± 7 μm ± 7 μm ± μm ± 7 μm Cladding non-circularity Core/cladding concentricity error Coating/cladding concentricity error SM-LWP ITU-T G.65.D SM ITU-T G.657.A SM ITU-T G.657.A SM µm ITU-T G.657.A SM NZD ITU-T G.655.D Zero dispersion wavelength ( o) - nm - nm - nm - nm Dispersion slope ( o) Chromatic 85 nm ps/(nm *km) ps/(nm *km) ps/(nm *km) ps/(nm *km) * km) * km) Chromatic 55 nm *km) *km) Chromatic 65 nm *km) *km) Chromatic nm Chromatic nm PMD Individual 55 nm nm 8nm 55 nm 65 nm Attenuation with bending Mandrel Radius 5mm@55 turns Mandrel Radius 5mm@65 turns Mandrel Radius mm@55 turns Mandrel Radius mm@65 turns Mandrel Radius 7,5mm@55 turns Mandrel Radius 7,5mm@65 turns MULTIMODE FIBER PROPERTIES Proof test, -6, ps/(nm*km),5 to, ps/(nm*km) MULTIMODE FIBER PROPERTIES MM6,5 OM MM5 M MM5 OM MM5 OM 7 Core diameter 6,5 ±,5 μm 5 ±,5 μm 5 ±,5 μm 5 ±,5 μm Core non-circularity Cladding diameter 5, ±, μm 5, ±, μm 5, ±, μm 5, ±, μm Coating diameter ± 5 μm ± 5 μm ± 5 μm ± 5 μm Cladding non-circularity Core/cladding concentricity error Coating/cladding concentricity error Numerical Aperture,75 ±,5, ±,5, ±,5, ±,5 85 nm,8 db/km,8 db/km nm,8 db/km,8 db/km *km 5 MHz*km *km 5 MHz*km *km 5 MHz*km *km 5 MHz*km *km *km Fibre capacity GBASE-SR m 8 m m 55 m Fibre capacity BASE-SX 7 m 6 m m m Fibre capacity GBASE-SR/GBASE-SR m 7 m Proof test

74