Double insulated, electron-beam cross-linked, halogen free photovoltaic wire sunlight resistant. Single conductor, flame retardant insulation.

Transcription

1 Technical Data Sheet BETAflam Solar 125 flex UL 4703 Description Double insulated, electron-beam cross-linked, halogen free photovoltaic wire sunlight resistant. Single conductor, flame retardant insulation. Approvals TÜV Rheinland 2 PfG PV1-F Nr. R CSA C 22.2 No report No , CU UL / PV Wire, UL 854 USE , NEC NFPA A Application Applicable as photovoltaic wire for modules and connection to the inverter of grounded and ungrounded photovoltaic power systems. The high quality insulation components are offering UV and ozone protection at 90 C for more than 25 years. 1. STUDERCABLES.COM SWITZERLAND BETAFLAM SOLAR 125 FLEX UL Construction 1. Conductor tinned fine copper strands according to VDE 0295/ IEC 60228, Cl Insulation white electron-beam cross-linked compound, flame retardant, halogen free 3. Jacket black electron-beam cross-linked compound, flame retardant, halogen free, UV and ozone resistant Dimensions Construction Article - Conductor Cond.-Ø Cable-Ø Resistance Weight Fire load Nr. Max. [n x mm²] [n x mm] [mm] [mm] mω/m [kg/km] [kwh/m] 1x AWG x / x 4 12 AWG x / x 6 10 AWG x / x 10 8 AWG x / Other dimensions upon request. Dated: /KEW Leoni Studer AG Ae- Date: Ae-Index: 05 Datei: BETAflam Solar 125 flex UL 4703_E_Ae_05 Page 1 / 2

2 Technical Data Sheet BETAflam Solar 125 flex UL 4703 Labelling Cross Section STUDERCABLES.COM SWITZERLAND BETAFLAM SOLAR 125 FLEX UL /1000 VAC 1 X MM2 TÜV PV1-F / E USE-2 / E PV WIRE AWG 90C WET OR DRY 600V SUN RES -40C (UL) RPV XL (ctuvus) AWG NR... Production Lot Number for internal purpose only. Subject to modifications. Technical Data Nominal voltage Test voltage U 0 /U 600 / 1000 V AC ; 1000 / 1800 V DC 6500 V AC 50Hz Temperature rating (20 000h) - 40 C up to C Ambient temperature > 25 years - 40 C up to + 90 C Max. short circuit temperature Min. bending radius 280 C, +536 F fixed installation 4 x Ø occasionally moved > 5 x Ø Material properties / Standards Design / Dimensions TÜV 2 PfG PV1-F, CSA C 22.2 No UL / PV WIRE, UL 854 USE-2 Halogen free IEC No corrosive gases IEC Flame retardant IEC / UL / VW1 Low smoke emission IEC 61034; EN Low fire load DIN No hazardous and toxic substances Ozone resistant EU-Directive: RoHS 2002/95/EC; PAH 2005/69/EC; PFOS 2006/122/EC EN h/40 C, process B Volume concentration 200x10-6 Material properties and technical data are subject to modifications. Dated: /KEW Leoni Studer AG Ae- Date: Ae-Index: 05 Datei: BETAflam Solar 125 flex UL 4703_E_Ae_05 Page 2 / 2

3 Technical informations 25 Standard packaging / Technical information Current rating 120 C / 248 F Ambient temperature 30 C / 86 F Construction Exposed On surfaces without opposite contact On surfaces with opposite contact In conduit, casing, duct 1 1 mm2 A A A A Continuous duty with current loads as per above table. This gives a conductor temperature of 120 C. (Calculation according IEC 60287) Conversion factors for deviating ambient temperatures (basis 30 C) Temperature Current rating at 120 C C Factor

4 BETAflam Solar 16 Module connection cables BETAflam Solar 125 RV flex FRNC Photovoltaic power cables, halogen free, flame retardant Advantages BETAflam Solar 125 RV flex FRNC Applications Double insulated, electron-beam cross-linked cables for photovoltaic power applications. With reduced diameter and integrated jacket. Construction Conductor Insulation Jacket Jacket colour Electrical characteristics Rated value Test voltage Tinned fine copper strands, acc. to VDE 0295 / IEC 60228, Class 5 XLPO, flame retardant, halogen free, electron-beam cross-linked XLPO, flame retardant, halogen free, electron-beam cross-linked, UV and ozone resistant black U 0 /U = 600 / 1000 V AC, 1000 / 1800 V DC 6500 V, 50 Hz, 5 min. Thermal characteristics Operating temperature Ambient temperature > 25 years (TÜV) Max. short circuit temp. 40 C up to +125 C 40 F up to +257 F 40 C up to +90 C 40 F up to +194 F 280 C, +536 F, 5 s Bending radius <10 mm >10 mm Fixed installation Occasionally moved Standards / Material properties > 4 > 5 > 5 > 7 Fire performance: IEC , IEC Smoke emission: IEC 61034; EN Low fire load: DIN Approvals: TÜV 2 PfG PV1-F Application standards: UNE 21123; UNE , UTE C Electron-beam cross-linked compounds UV, ozone and hydrolysis resistant High temperature resistance, the materials do not melt or flow Very long service life > 25 years at 90 C Compatible to all popular connectors Flexible and space-saving installation

5 BETAflam Solar 125 RV flex FRNC Module connection cables 17 BETAflam Solar Dimensions, weights Construction Marking Conductor Outer Resistance Weight Fire load Order no. n mm2 Colour mm mm max, mω/m kg/km kwh/m white white white white white white white white red red red Order units Construction Marking Order no. n mm2 Farbe m m m m m 1 4 white V V V2 1 6 white V V V white V2 1 4 red V V2 1 6 red V V3 More information on the standard packaging unit see page 26. Further packaging units upon request. Bold printed order no. = stock item