LED CONVERTER. Korea, Republic of SOLUM CO., LTD. Korea, Republic of. Additional information on page 2 OLU700P142U1A; OLU700P142U1U

Transcription

1 Ref. Certif. No. NO93072/A1/M1 IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIMENT (IECEE) CB SCHEME SYSTEME CEI DACCETATION MUTUELLE DE CERTIFICATS DESSAIS DES EQUIEMENTS ELECTRIQUES (IECEE) METHODE OC CB TEST CERTIFICATE CERTIFICAT D'ESSAI OC roduct roduit Name and address of the applicant Nom et adresse du demandeur Name and address of the manufacturer Nom et adresse du fabricant Name and address of the factory Nom et adresse de l'usine Note: When more than one factory, please report on page 2 Note: Lorsque il y plus d'une usine, veuillez utiliser la deuxième page Ratings and principal characteristics Valeurs nominales et caractéristiques principales Trademark (if any) Marque de fabrique (si elle existe) LED CONVERTER SOLUM CO., LTD. 150, Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggido, Korea, Republic of SOLUM CO., LTD. 150, Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggido, Korea, Republic of Additional information on page 2 Max. 0.7 A, 82 W, V~, 50/60 Hz F=0.9, ta=-40 C C, tc=+85 C LED output: 1.4 A, 65 W, Vdc (Max. 59 Vdc) 12V output: Max. 0.1 A, 1.5 W, Max Vdc Type of Manufacturer s Testing Laboratories used Type de programme du laboratoire d essais constructeur Model / Type Ref. Ref. De type OLU700142U1A; OLU700142U1U Additional information (if necessary may also be reported on page 2) Les informations complémentaires (si nécessaire, peuvent être indiqués sur la deuxième page A sample of the product was tested and found to be in conformity with Un échantillon de ce produit a été essayé et a été considéré conforme à la As shown in the Test Report Ref. No. which forms part of this Certificate Comme indiqué dans le Rapport dessais numéro de référence qui constitue partie de ce Certificat Additional information on page 2 (ed.1) (ed.2);am1;am2 This CB Test Certificate is issued by the National Certification Body Ce Certificat dessai OC est établi par l'organisme National de Certification This certificate replaces the certificate NO93072/A1, due to technical modifications. Gaustadalléen 30 NO-0373 Oslo, Norway Date: Signature: Okhyun Jeon Certification Department Issued /2

2 Ref. Certif. No. NO93072/A1/M1 Dongguan Samsung Electro-Mechanics Co., Ltd. Hengkeng Management Area, Liaobu Town, Dongguan City, Guangdong rovince China Dong Guan Aptech Electronics Co., Ltd. Jinfu 2 Road, Tangchun East Area, Tangchun Village, Liaobu Town Dongguan City, Guangdong rovince China Dongguan Towada Electronics Co., Ltd. Fu Da Ind, Zhangyang District, Zhangmutou, Dongguan China SOLUM CO., LTD. 150, Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggido, Korea, Republic of SOLUM VINA Co., Ltd. lot B3, Bathien 2 Industrial ark, Thien Ke Ward, Binh Xuyen District, Vinh huc rovince, Viet Nam Dongguan Solytech Enterprise Corporation. Hong Men Shan Industrial Area, Chang Shan Tou Management Area, Qing Xi Town, Dong Guan City Guang Dong rovince China Dongguan City Yingju Electronics Co., Ltd. Yewuji Village, Sijia, Shijie Town Dongguan, Guangdong China Dongguan Solum Electronics Co., Ltd. Hengkeng Management Area, Liaobu Town, Dongguan City, Guangdong rovince, China Dongguan Yingju ower Co., Ltd. No.6 Yongxing Road, Shayao Village, Shijie Town, Dongguan City, Guangdong rovince China Gaustadalléen 30 NO-0373 Oslo, Norway Date: Signature: Okhyun Jeon Certification Department Issued /2

3 Ref. Certif. No. NO93392/M1 IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIMENT (IECEE) CB SCHEME SYSTEME CEI DACCETATION MUTUELLE DE CERTIFICATS DESSAIS DES EQUIEMENTS ELECTRIQUES (IECEE) METHODE OC CB TEST CERTIFICATE CERTIFICAT D'ESSAI OC roduct roduit Name and address of the applicant Nom et adresse du demandeur Name and address of the manufacturer Nom et adresse du fabricant Name and address of the factory Nom et adresse de l'usine Note: When more than one factory, please report on page 2 Note: Lorsque il y plus d'une usine, veuillez utiliser la deuxième page Ratings and principal characteristics Valeurs nominales et caractéristiques principales Trademark (if any) Marque de fabrique (si elle existe) LED CONVERTER SOLUM CO., LTD. 150, Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggido, Korea, Republic of SOLUM CO., LTD. 150, Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggido, Korea, Republic of Additional information on page 2 Max. 0.6 A, 62 W, V~, 50/60 Hz F=0.9, ta=-40 C C, tc=+85 C LED output: 1.05 A, 49 W, Vdc (Max. 59 Vdc) 12V output: Max. 0.1 A, 1.5 W, Max Vdc Type of Manufacturer s Testing Laboratories used Type de programme du laboratoire d essais constructeur Model / Type Ref. Ref. De type OLU550102U1U; OLU550102U1A Additional information (if necessary may also be reported on page 2) Les informations complémentaires (si nécessaire, peuvent être indiqués sur la deuxième page A sample of the product was tested and found to be in conformity with Un échantillon de ce produit a été essayé et a été considéré conforme à la As shown in the Test Report Ref. No. which forms part of this Certificate Comme indiqué dans le Rapport dessais numéro de référence qui constitue partie de ce Certificat Additional information on page 2 (ed.1) (ed.2);am1;am2 This CB Test Certificate is issued by the National Certification Body Ce Certificat dessai OC est établi par l'organisme National de Certification This certificate replaces the certificate NO93392, due to technical modifications. Gaustadalléen 30 NO-0373 Oslo, Norway Date: Signature: Okhyun Jeon Certification Department Issued /2

4 Ref. Certif. No. NO93392/M1 Dongguan Samsung Electro-Mechanics Co., Ltd. Hengkeng Management Area, Liaobu Town, Dongguan City, Guangdong rovince China Dong Guan Aptech Electronics Co., Ltd. Jinfu 2 Road, Tangchun East Area, Tangchun Village, Liaobu Town Dongguan City, Guangdong rovince China Dongguan Towada Electronics Co., Ltd. Fu Da Ind, Zhangyang District, Zhangmutou, Dongguan China SOLUM CO., LTD. 150, Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggido, Korea, Republic of SOLUM VINA Co., Ltd. lot B3, Bathien 2 Industrial ark, Thien Ke Ward, Binh Xuyen District, Vinh huc rovince, Viet Nam Dongguan Solytech Enterprise Corporation. Hong Men Shan Industrial Area, Chang Shan Tou Management Area, Qing Xi Town, Dong Guan City Guang Dong rovince China Dongguan City Yingju Electronics Co., Ltd. Yewuji Village, Sijia, Shijie Town Dongguan, Guangdong China Dongguan Solum Electronics Co., Ltd. Hengkeng Management Area, Liaobu Town, Dongguan City, Guangdong rovince, China Dongguan Yingju ower Co., Ltd. No.6 Yongxing Road, Shayao Village, Shijie Town, Dongguan City, Guangdong rovince China Gaustadalléen 30 NO-0373 Oslo, Norway Date: Signature: Okhyun Jeon Certification Department Issued /2

5 Ref. Certif. No. NO93393/M1 IEC SYSTEM FOR MUTUAL RECOGNITION OF TEST CERTIFICATES FOR ELECTRICAL EQUIMENT (IECEE) CB SCHEME SYSTEME CEI DACCETATION MUTUELLE DE CERTIFICATS DESSAIS DES EQUIEMENTS ELECTRIQUES (IECEE) METHODE OC CB TEST CERTIFICATE CERTIFICAT D'ESSAI OC roduct roduit Name and address of the applicant Nom et adresse du demandeur Name and address of the manufacturer Nom et adresse du fabricant Name and address of the factory Nom et adresse de l'usine Note: When more than one factory, please report on page 2 Note: Lorsque il y plus d'une usine, veuillez utiliser la deuxième page Ratings and principal characteristics Valeurs nominales et caractéristiques principales Trademark (if any) Marque de fabrique (si elle existe) LED CONVERTER SOLUM CO., LTD. 150, Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggido, Korea, Republic of SOLUM CO., LTD. 150, Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggido, Korea, Republic of Additional information on page 2 Max. 0.4 A, 45 W, V~, 50/60 Hz F=0.9, ta=-40 C C, tc=+85 C LED output: 0.7 A, 35 W, Vdc (Max. 59 Vdc) 12V output: Max. 0.1 A, 1.5 W, Max Vdc Type of Manufacturer s Testing Laboratories used Type de programme du laboratoire d essais constructeur Model / Type Ref. Ref. De type OLU400701U1U; OLU400701U1A Additional information (if necessary may also be reported on page 2) Les informations complémentaires (si nécessaire, peuvent être indiqués sur la deuxième page A sample of the product was tested and found to be in conformity with Un échantillon de ce produit a été essayé et a été considéré conforme à la As shown in the Test Report Ref. No. which forms part of this Certificate Comme indiqué dans le Rapport dessais numéro de référence qui constitue partie de ce Certificat Additional information on page 2 (ed.1) (ed.2);am1;am2 This CB Test Certificate is issued by the National Certification Body Ce Certificat dessai OC est établi par l'organisme National de Certification This certificate replaces the certificate NO93393, due to technical modifications. Gaustadalléen 30 NO-0373 Oslo, Norway Date: Signature: Okhyun Jeon Certification Department Issued /2

6 Ref. Certif. No. NO93393/M1 Dongguan Samsung Electro-Mechanics Co., Ltd. Hengkeng Management Area, Liaobu Town, Dongguan City, Guangdong rovince China Dong Guan Aptech Electronics Co., Ltd. Jinfu 2 Road, Tangchun East Area, Tangchun Village, Liaobu Town Dongguan City, Guangdong rovince China Dongguan Towada Electronics Co., Ltd. Fu Da Ind, Zhangyang District, Zhangmutou, Dongguan China SOLUM CO., LTD. 150, Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggido, Korea, Republic of SOLUM VINA Co., Ltd. lot B3, Bathien 2 Industrial ark, Thien Ke Ward, Binh Xuyen District, Vinh huc rovince, Viet Nam Dongguan Solytech Enterprise Corporation. Hong Men Shan Industrial Area, Chang Shan Tou Management Area, Qing Xi Town, Dong Guan City Guang Dong rovince China Dongguan City Yingju Electronics Co., Ltd. Yewuji Village, Sijia, Shijie Town Dongguan, Guangdong China Dongguan Solum Electronics Co., Ltd. Hengkeng Management Area, Liaobu Town, Dongguan City, Guangdong rovince, China Dongguan Yingju ower Co., Ltd. No.6 Yongxing Road, Shayao Village, Shijie Town, Dongguan City, Guangdong rovince China Gaustadalléen 30 NO-0373 Oslo, Norway Date: Signature: Okhyun Jeon Certification Department Issued /2

7 Test Report issued under the responsibility of Amendment to Test Report This Amendment is valid only together with the main Test Report Report No.... : Main Report No.... : Date of issue... : Total number of pages... : 22 pages, refer to page 4 for the attachments. Name of Testing Laboratory preparing the Report... : Nemko Korea Co., Ltd. Applicant's Name... : SOLUM Co., Ltd. 153, Osan-Ro, Mohyeon-Myeon, Cheoin-Gu, Yongin-Si, Gyeonggi-Do, 16885, Korea, Republic of Address... : 150, Maeyeong-ro, Yeongtong-gu, Suwon-si, Gyeonggi-do, 16674, Republic of Korea Test specification: Standard... : :2006 (First Edition) used in conjunction with :2007 (Second Edition) + A1: A2:2012 Test procedure... : CB scheme Non-standard test method... : N/A Copyright 2013 Worldwide System for Conformity Testing and Certification of Electrotechnical Equipment and Components (IECEE), Geneva, Switzerland. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the IECEE is acknowledged as copyright owner and source of the material. IECEE takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. If this Test Report Form is used by non-iecee members, the IECEE/IEC logo and the reference to the CB Scheme procedure shall be removed. This report is not valid as a CB Test Report unless signed by an approved CB Testing Laboratory and appended to a CB Test Certificate issued by an NCB in accordance with IECEE 02. General disclaimer: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Issuing CB Testing Laboratory. The authenticity of this Test Report and its contents can be verified by contacting the NCB, responsible for this Test Report. This Test Report, when bearing the Nemko name and logo is only valid when issued by a Nemko laboratory, or by a laboratory having special agreement with Nemko.

8 age 2 of 22 Report No Test item description... : LED CONVERTER Trade Mark... : Manufacturer... : Same as Applicant Model/Type reference... : 1) OLU700142U1U, OLU700142U1A 2) OLU550102U1U, OLU550102U1A 3) OLU400701U1U, OLU400701U1A Ratings... : 1) For models OLU700142U1U, OLU700142U1A Input: Max. 0.7 A, 82 W, V~, 50/60 Hz, F=0.9, ta=-40 C C, tc=+85 C LED output: 1.4 A, 65 W, Vdc (Max. 59 Vdc) 12V output: Max. 0.1 A, 1.5 W, Max Vdc 2) For models OLU550102U1U, OLU550102U1A Input: Max. 0.6 A, 62 W, V~, 50/60 Hz, F=0.9, ta=-40 C C, tc=+85 C LED output: 1.05 A, 49 W, Vdc (Max. 59 Vdc) 12V output: Max. 0.1 A, 1.5 W, Max Vdc 3) OLU400701U1U, OLU400701U1A Input: Max. 0.4 A, 45 W, V~, 50/60 Hz, F=0.9, ta=-40 C C, tc=+85 C LED output: 0.7 A, 35 W, Vdc (Max. 59 Vdc) 12V output: Max. 0.1 A, 1.5 W, Max Vdc Nemko Rev

9 age 3 of 22 Report No Responsible Testing Laboratory (as applicable), testing procedure and testing location(s): CB Testing Laboratory: Testing location/ address... : Associated CB Testing Laboratory: Testing location/ address... : Nemko Korea Co., Ltd. 153, Osan-Ro, Mohyeon-Myeon, Cheoin-Gu, Yongin-Si, Gyeonggi-Do, 16885, Korea, Republic of Tested by (name, function, signature)... : Kyung Man, Kwak roject Handler Approved by (name, function, signature).. : Hyun Woo, ark Varificator Testing procedure: CTF Stage 1: Testing location/ address... : N/A Tested by (name, function, signature)... : Approved by (name, function, signature).. : Testing procedure: CTF Stage 2: Testing location/ address... : N/A Tested by (name + signature)... : Witnessed by (name, function, signature). : Approved by (name, function, signature).. : Testing procedure: CTF Stage 3: Testing procedure: CTF Stage 4: Testing location/ address... : N/A Tested by (name, function, signature)... : Witnessed by (name, function, signature). : Approved by (name, function, signature).. : Supervised by (name, function, signature) :

10 age 4 of 22 Report No List of Attachments (including a total number of pages in each attachment): Attachment 1: Heating test according to Annex L.6 of :2007+A1:2010+A2:2012 (4 pages) Attachment 2: ictures (5 pages) Attachment 3: Creepage distances and clearances according to Annex I.11 of :2006 (1 page) Attachment 4: CB layout (1 page) Attachment 5: Transformer specification (8 pages) Attachment 6: Instruction manual (3 pages) Summary of testing: Tests performed (name of test and test clause): Testing location: All applicable as far as possible test clauses listed below. 17 (15) Construction 18 (16) Creepage distances and clearances 20 (18) Resistance to heat, fire and tracking Annex I articular additional requirements for independent SELV d.c. or a.c. supplied electronic controlgear for LED module Annex L articular additional requirements for controlgear providing SELV () The test samples are complying with :2006 used in conjunction with (Second Edition): 2007+A1:2010+A2:2012 and with other standards as listed at section Summary of compliance with national difference. Nemko Korea Co., Ltd. 153, Osan-Ro, Mohyeon-Myeon, Cheoin-Gu, Yongin-Si, Gyeonggi-Do, 16885, Korea, Republic of Summary of compliance with National Differences List of countries addressed: European group differences and national differences. The product fulfils the requirements EN :2006 used in conjunction with EN :2008+A1:2011+A2:2013.

11 age 5 of 22 Report No Copy of marking plate The artwork below may be only a draft. The use of certification marks on a product must be authorized by the respective NCBs that own these marks. <For model OLU700142U1A> <For model OLU550102U1A> <For model OLU400701U1A> Calibration Measurement uncertainty Evaluation of results All instruments used in the tests given in this test report are calibrated and traceable to national or international standards. Further information about traceability will be given on request. Measurement uncertainties are calculated for all instruments and instrument set-ups given in this report. Calculations are based on the principles given in the standard EA-4/02 (Dec. 1999), IEC Guide 115:2007 and other relevant internal Nemko-procedures. Further information about measurement uncertainties will be given on request. If not explicitly stated otherwise in the standard, the test is passed if the measured value is equal to or below (above) the limit line, regardless of the measurement uncertainty. If the measured value is above (below) the limit line, the test is not passed - ref IEC Guide 115:2007. The instrumentation accuracy is within limits agreed by IECEE-CTL.

12 age 6 of 22 Report No Test item particulars...: Classification of installation and use...: Independent SELV and normal use Supply Connection...: Supply cord...: ossible test case verdicts: - test case does not apply to the test object...: N/A - test object does meet the requirement...: (ass) - test object does not meet the requirement...: F (Fail) Testing...: Date of receipt of test item...: Date(s) of performance of tests...: to General remarks: The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Issuing testing laboratory. "(see Enclosure #)" refers to additional information appended to the report. "(see appended table)" refers to a table appended to the report. Throughout this report a comma / point is used as the decimal separator.

13 age 7 of 22 Report No Manufacturer s Declaration per sub-clause of IECEE 02: The application for obtaining a CB Test Certificate includes more than one factory location and a declaration from the Manufacturer stating that the sample(s) submitted for evaluation is (are) representative of the products from each factory has been provided : Yes Not applicable When differences exist; they shall be identified in the General product information section. Name and address of factory (ies)... : 1) Same as Applicant. 2) Dongguan Solum Electronics Co., Ltd. Hengkeng Management Area, Liaobu Town, Dongguan City, Guangdong rovince China 3) Dongguan Samsung Electro-Mechanics Co., Ltd. Hengkeng Management Area, Liaobu Town, Dongguan City Guangdong rovince China 4) Dong Guan Aptech Electronics Co., Ltd. Jinfu 2 Road, TangChun East Area, TangChun Village, LiaoBu Town DongGuan City, GuangDong rovince, China 5) Dongguan City Yingju Electronics Co. Ltd. Yewuji Village, Sijia, Shijie Town Dongguan, Guangdong China 6) Dongguan Towada Electronics Co., Ltd. Fu Da Ind, Zhangyang District, Zhangmutou, Dongguan China 7) Dongguan Yingju ower Co., Ltd. No.6 Yongxing Road, Shayao Village, Shijie Town, Dongguan City, Guangdong rovince, China 8) Dongguan Solytech Enterprise Corporation Hong Men Shan Industrial Area, Chang Shan Tou Management Area, Qing Xi Town, Dong Guan City, Guang Dong rovince China 9) SOLUM VINA CO., LTD. lot B3, Bathien 2 Industrial ark, Thien Ke Ward, Binh Xuyen District, Vinh huc rovince, Viet Nam

14 age 8 of 22 Report No General product information: This amendment test report No shall always be enclosed with main test report No and amendment test report No The update concerned in this test report are as follows; - Change of label design for model OLU700142U1A, OLU550102U1A, OLU400701U1A (see copy of marking plate). - Change of a type name for transformer (TA01) and its components (see bold letters in ANNEX 1: component, and attachment 5: Transformer specification). - Addition of an alternative type for transformer (TA01) and its components (see bold letters in ANNEX 1: component, and attachment 5: Transformer specification). - Change of an internal construction for transformer (TA01) (see attachment 5: Transformer specification). - Addition of output connector as optional component (see bold letters in ANNEX 1: component and attachment 6: Instruction manual). - Correction of ictures and specification for transformer (TM01) (see attachment 2: ictures and attachment 5: Transformer specification). - Change of CB layout which is not affect clearance and creepage distances (see attachment 2: ictures and attachment 4: CB layout). After review the above updates concerned, additional tests were carried out as followings: 18 (16) Creepage distances and clearances 20 (18) Resistance to heat, fire and tracking Annex I articular additional requirements for independent SELV d.c. or a.c. supplied electronic controlgear for LED module Annex L articular additional requirements for controlgear providing SELV () Model differences: - Basic model is OLU700142U1U. - The variant model OLU700142U1A is identical to the basic model except for model name. - The variant models OLU550102U1U, OLU550102U1A, OLU400701U1U and OLU400701U1A are identical to the basic model except for below differences. Model name OLU700142U1U, OLU700142U1A OLU550102U1U, OLU550102U1A OLU400701U1U, OLU400701U1A Input rating Max. 0.7 A, 82 W, V~, 50/60 Hz, F=0.9, ta=-40 C C, tc=+85 C Max. 0.6 A, 62 W, V~, 50/60 Hz, F=0.9, ta=-40 C C, tc=+85 C Max. 0.4 A, 45 W, V~, 50/60 Hz, F=0.9, ta=-40 C C, tc=+85 C LED output rating 1.4 A, 65 W, Vdc (Max. 59 Vdc) 1.05 A, 49 W, Vdc (Max. 59 Vdc) 0.7 A, 35 W, Vdc (Max. 59 Vdc) Capacitance for X-capacitor (CX02) 150 nf 150 nf 100 nf Type for line filter (LX01) CH K or LL60D-102 CH K or LL35D-202 CH K or LL35D-202 Type for FC (L01) LL70D-6FC LL70D-6FC LL35D-6FC Capacitance for El-capacitor (C91) Max. 47 μf Max. 33 μf Max. 22 μf

15 age 9 of 22 Report No roject history: Nemko Report/ Modification to the appliances: Order No.: Main test report Changes/ Modifications in clause(s): Addition of four variant models OLU550102U1U, OLU550102U1A, OLU400701U1U and OLU400701U1A (see copy of marking plate) - Change of label design for model OLU700142U1A (see copy of marking plate). - Change of name and address for factory site in Viet Nam (see bold letters in Name and address of factory (ies)). - Change of technical data for X-capacitor (CX02) and El-capacitor (C91) (see bold letters in model differences and ANNEX 1: component). - Addition of an alternative type for line filter (LX01) and FC (L01) (see bold letters in model differences in ANNEX 1: component). - Copy of marking plate - Name and address of factory (ies) - General product information - roject history - Clause 7 - Annex I - Annex L (). - hotos Change of label design for model OLU700142U1A, OLU550102U1A, OLU400701U1A (see copy of marking plate). - Change of a type name for transformer (TA01) and its components (see bold letters in ANNEX 1: component, and attachment 5: Transformer specification). - Addition of an alternative type for transformer (TA01) and its components (see bold letters in ANNEX 1: component, and attachment 5: Transformer specification). - Change of an internal construction for transformer (TA01) (see attachment 5: Transformer specification). - Addition of output connector as optional component (see bold letters in ANNEX 1: component and attachment 6: Instruction manual). - Correction of ictures and specification for transformer (TM01) (see attachment 2: ictures and attachment 5: Transformer specification). - Change of CB layout which is not affect clearance and creepage distances (see attachment 2: ictures and attachment 4: CB layout). - Copy of marking plate - General product information - roject history - Clause 6 (6) - Clause 17 (15) - Clause 18 (16) - Clause 20 (18) - Annex I - Annex L (). - Annex 1 - ictures

16 age 10 of 22 Report No: (15) CONSTRUCTION - (15.3) lugs and socket-outlets used in SELV or ELV circuits No dangerous compatibility between output socket-outlet and a plug for socket-outlets for input circuit in relation to installation rules, voltages and frequencies lugs and socket-outlets for SELV comply with IEC and IEC lugs and socket-outlets for SELV 3 A, 25 V r.m.s. or 60 V d.c. and 72 W comply with IEC and IEC or: - plugs not able to enter socket-outlets of other standardised system - socket-outlets not admit plugs of other standardised system - socket-outlets without protective earth N/A N/A 18 (16) CREEAGE DISTANCES AND CLEARANCES - (16) Creepage distances and clearances according to N/A Table 3 and 4, as appropriate Controlgears providing SELV comply with L.1 in Annex L Insulating lining of metallic enclosures Basic insulation on printed boards tested according to clause 14 Distances subjected to both sinusoidal voltage as non-sinusoidal pulses not less than value in either Table 3 or 4 Creepage distances not less than minimum clearance Insulating lining and sheet used between live parts and metal enclosure. N/A N/A 20 (18) RESISTANCE TO HEAT, FIRE AND TRACKING - (18.1) Ball-pressure test: - part tested; temperature ( C)... : Output connector types JWF and JWKF series: 125 C; 1.3 mm - part tested; temperature ( C)... : Output connector type SW series: 125 C; 1.5 mm

17 age 11 of 22 Report No: I ANNEX I: ARTICULAR ADDITIONAL REQUIREMENTS FOR INDEENDENT SELV D.C. OR A.C. SULIED ELECTRONIC CONTROLGEAR FOR LED MODULES I.8 Insulation resistance and electric strength I.8.3 Electric strength test: 1) Between live parts of input circuits and live parts of output circuits... : rimary to Enclosure (RI) 3750 Vac 2) Over basic or supplementary insulation between: a) live parts which are or may become of different polarity... : b) live parts and body if intended to be connected to protective earth... : c) accessible metal parts and a metal rod of the same diameter as the flexible cable or cord... : Live to Neutral (BI) 1875 Vac N/A N/A d) live parts and an intermediate metal part... : N/A e) intermediate metal parts and the body... : N/A 3) Over reinforced insulation between the body and live parts... : No flashover or breakdown occurred rimary to Enclosure (RI) 3750 Vac I.11 Creepage distances and clearances 1. Insulation between input and output circuits: a) measured values > specified values (mm)... : See Attachment 3. b) measured values > specified values (mm)... : N/A c) measured values > specified values (mm)...: Transformer (TM01) bobbin thickness: 4.0 mm (limit: 1.3 mm) Certified triple insulated wire used on transformer (TA01) and 1 layer insulation tape is used between triple insulated wire and other enamel wire. 2. Insulation between adjacent input circuits: measured values > specified values (mm)... : 2. Insulation between adjacent output circuits: measured values > specified values (mm)... : N/A N/A 3. Insulation between terminals for external connection: N/A a) measured values > specified values (mm)...: N/A b) measured values > specified values (mm)...: N/A c) measured values > specified values (mm)...: N/A 4. Basic or supplementary insulation: a) measured values > specified values (mm)...: See Attachment 3. b) measured values > specified values (mm)...: N/A

18 age 12 of 22 Report No: c) measured values > specified values (mm)... : N/A d) measured values > specified values (mm)... : N/A e) measured values > specified values (mm)... : N/A 5. Reinforced insulation: measured values > specified values (mm)... : See Attachment Distance through insulation: a) measured values > specified values (mm)... : N/A b) measured values > specified values (mm)... : rimary metal case: 1.13 mm (limit: 1.1 mm) c) measured values > specified values (mm)... : N/A d) measured values > specified values (mm)... : N/A L ANNEX L: ARTICULAR ADDITIONAL REQUIREMENTS FOR CONTROLGEARS ROVIDING SELV () L.6 Heating No excessive temperatures in normal use See attachment 1. Value if capacitor tc marked... : See attachment 1. Winding insulation classified as Class... : Class B Comply with tests of clause 14 of IEC with adjustments

19 age 13 of 22 Report No: ANNEX 1: components object/part No. co de manufacturer/ trademark AC input wire A Samwon Electric Cable type/model technical data IEC 08 Min. 300 V, 0.75 or 1.0 or 1.5 mm 2, 90 C, D Doowon Cable IEC 08 Min. 300 V, 0.75 or 1.0 mm 2 90 C, D D D D D D Dae Young Wire SHANGHAI YUSHENG ENTERRISE DEVELOMEN T CO., LTD LINOYA ELECTRONIC TECHNOLOGY CO., LTD Samwon Electric Cable Co., Ltd. Shenzhen linoya electronic Co., Ltd. KISEONG CABLE CO LTD. D Ki Seong D D D Changshu Honglin wire & Cable co. ltd Dae Young Wire (Tianjin) Thai Wonderful Wire Cable Co., Ltd IEC 08 Min. 300 V, 0.75 or 1. mm 2, 90 C, H03VV-F Min. 300 V, 0.75 mm 2 or 1.0 mm 2, 70 C, IEC 53 (H05VV-F) Min. 300 V, 0.75 mm 2 or 1.0 mm 2, 70 C, IEC 57 1 ) Min. 300 V, 1.0 mm C, IEC 53 1 ) Min. 300 V, 0.75 or 1.0 mm 2,105 C, IEC 53 1 ) Min. 300 V, 0.75 or 1.0 mm 2, 105 C, KSC IEC 08 1 ) Min. 300 V, 0.75 or 1.0 mm 2, 90 C, HVSF 1 ) Min. 300 V, 0.75 or 1.0 mm 2, 90 C HVSF 1 ) Min. 300 V, 0.75 or 1.0 mm 2, 90 C HVSF 1 ) Min. 300 V, 0.75 or 1.0 mm 2, 90 C standard KS C IEC KS C IEC KS C IEC K DIN EN mark(s) of conformity IEC, KC IEC, KC IEC, KC IEC, KC K IEC, KC K K K K JIS C 3306 JIS C 3306 JIS C 3306 KC KC KC KC SE SE SE

20 age 14 of 22 Report No: object/part No. co de manufacturer/ trademark type/model technical data standard mark(s) of conformity D Changshu Hong-Lin Wire & Cable Co., Ltd IEC 06 1 ) Min. 300 V, 0.75 or 1.0 mm 2, 90 C GB CCC D LTK Cable IEC 08 1 ) Min. 300 V, 0.75 or 1.0 mm 2, 90 C GB CCC D Kiseong cable inc ) Min. 300 V, 18 AWG, Min. 90 C UL 758 UL/cUL D Hae Kwang Cable ) Min. 300 V, 18 AWG, Min. 90 C UL 758 UL/cUL D Shinhwa electric wire co ltd ) Min. 300 V, 18 AWG, Min. 90 C UL 758 UL/cUL D Dae Young Wire (Tianjin) ) Min. 300 V, 18 AWG, Min. 90 C UL 758 UL/cUL D Wonderful hitech co ltd ) Min. 300 V, 18 AWG, Min. 90 C UL 758 UL/cUL D Eleteck Wire & Cable Co., Ltd ) Min. 300 V, 18 AWG, Min. 90 C UL 758 UL/cUL D LTK Wiring Co., Ltd ) Min. 300 V, 18 AWG, Min. 90 C UL 758 UL/cUL D Wonderful Hi- Tech Co., Ltd ) Min. 300 V, 18 AWG, Min. 90 C UL 758 UL/cUL D Shenzhen Linoya Electronic Co., Ltd ) Min. 300 V, 18 AWG, Min. 90 C UL 758 UL/cUL D KDK SJT 1 ) Min. 300 V, 18 AWG, 105 C UL 758 UL/cUL D Do Woo Electric Wire Co., Ltd ) Min. 300 V, 18 AWG, 105 C UL 758 UL/cUL

21 age 15 of 22 Report No: object/part No. DC output cable for LED module DC output cable for control output co de D D D D D A D D A D manufacturer/ trademark DOWOO CO., LTD. Shenzhen linoya electronic Co., Ltd. LTK ELECTRIC WIRE (HUIZHOU)LTD LINOYA ELECTRONIC TECHNOLOGY CO., LTD Hae Kwang Cable DO WOO ELECTRIC WIRE CO LTD SHENZHEN LINOYA ELECTRONIC CO LTD LTK ELECTRIC WIRE (HUIZHOU) LTD DO WOO ELECTRIC WIRE CO LTD SHENZHEN LINOYA ELECTRONIC CO LTD Fuse (FS01) A Littelfuse hils. Inc. Varistor (VX01) A Amotech Co., Ltd. X-capacitor (CX01) A Cowell Fashion Co., Ltd. ilkor type/model technical data ) Min. 300 V, 18 AWG, 105 C ) Min. 300 V, 18 AWG, 105 C UL ) Min. 300V, 18AWG, 105 C. UL ) Min. 300 V, 18 AWG, Min. 105 C AWM ) Min. 300 V, 18 AWG, 90 C UL 2517 Min. 300 V, 22 AWG, 105 C UL 2517 UL 2517 Min. 300 V, 22 AWG, 105 C Min. 300 V, 22 AWG, 105 C UL 2517 Min. 300 V, 24 AWG, 105 C UL 2517 Min. 300 V, 24 AWG, 105 C 369 Min. 300 V, T5.0 A INR14D751 Min. 750 V, Min. 85 C CX Vac, 150 nf, 105 C standard UL 758 UL 758 UL 758 UL 758 UL 758 UL 758 UL 758 UL 758 UL 758 UL 758 IEC , IEC mark(s) of conformity UL/cUL UL/cUL UL/cUL UL/cUL CSA, UL UL/cUL UL/cUL UL/cUL UL/cUL UL/cUL VDE ( ) IEC VDE (114190) IEC EN ENEC (0256-4J)

22 age 16 of 22 Report No: object/part No. X-capacitor (CX02) Bridging capacitor (CY01) Line filter (LX01) co de A manufacturer/ trademark Cowell Fashion Co., Ltd. ilkor D Cowell Fashion Co., Ltd. ilkor A DONGIL ELECTRONIC CO LTD D Walsin Technology Corporation (OE) C Kwang Sung Electronics H.K Co. Limited D Li Shin Electronic Limited C Kwang Sung Electronics H.K Co. Limited D Li Shin Electronic Limited type/model CX ), 3 ) CX ) DA AH CH K / 102K 2 ) LL60D-102 / 102L 2 ) CH K / 202K 3 ), 4 ) LL35D-202 / 202L 3 ), 4 ) Line filter (LX02) C TNC Co., Ltd. CV408360SKC / S Core cover of Line filter (LX02) Coil base of Line filter (LX02) C LG Chem Ltd. D Samyang Corporation D Wintech olymer Ltd. LUOX G- 2156F(#) 1500GN-(k) 3316(r8)(r9) technical data 305 Vac, 150 nf, 105 C 305 Vac, 100 nf 5 ), 105 C Max. 3.3 nf, 400 Vac, Y1, 125 C Max. 3.3 nf, 400 Vac, Y1, 125 C standard IEC EN IEC EN IEC EN IEC EN Min. 130 C Min. 130 C Min. 130 C Min. 130 C Min. 125 C BT, V-0, 130 C BT/ET, V-0, 130 C BT, V-0, 130 C C Hexion GmbH F 2736(a)(b) F, V-0, 150 C D Chang Chun lastics Co., Ltd. T375HF MC, V-0, 150 C UL 94 UL 94 UL 94 UL 94 UL 94 mark(s) of conformity ENEC (0256-4J) ENEC (0256-4J) FIMKO (ENEC A3) VDE ( ) UL (E67171) UL (E121254) UL (E213445) UL (E61040) UL (E59481)

23 age 17 of 22 Report No: object/part No. co de manufacturer/ trademark type/model technical data standard mark(s) of conformity Heat shrink tube of Line filter (LX02) C HAN KYUNG COMONENT HKCT2(HF) olyolefin, 125 C UL 224 UL (E222852) Line filter (LX03) C TNC Co., Ltd. CV008090SJ4 Min.125 C Coil separator of Line filter (LX03) C TORAY Industries INC LC L304T40 LC, V-0, 130 C UL 94 UL (E41797) D SOLVAY ENGINEERING LASTICS GBU A 50H1(r3)(f2) A66, V-0, 130 C UL 94 UL (E44716) Coil base of Line filter (LX03) C Hexion GmbH F 2736(a)(b) F, V-0, 150 C UL 94 UL (E61040) D Chang Chun lastics Co., Ltd. T375HF MC, V-0, 150 C UL 94 UL (E59481) Heat shrink tube of Line filter (LX03) C HAN KYUNG COMONENT HKCT2(HF) olyolefin, 125 C UL 224 UL (E222852) Line filter (LS01) C TNC Co., Ltd. VA2503UNB2 Min. 130 C D Kwang Sung Electronics H.K Co. Limited KV Min. 130 C Coil base of Line filter (LS01) C Hexion GmbH F2736(a)(b) F, V-0, 150 C UL 94 UL (E61040) D CHANG CHUN LASTICS CO.,LTD T375HF MC, V-0, 150 C UL 94 UL (E59481) Tube of Line filter (LS01) C SHENZHEN WOER HEAT- SHRINKABLE MATERIAL CO.,LTD WF TFE, 200 C UL 224 UL (E203950) D FLUO TECH INDUSTRIES CO LTD TFT TFE, 200 C UL 224 UL (E175982)

24 age 18 of 22 Report No: object/part No. Triple insulated wire of Line filter (LS01) FC (L01) Bobbin of FC (L01) Triple insulated wire of FC (L01) Insulation Tape of FC (L01) Bridge Diode (BD01) co de manufacturer/ trademark C YOUNG CHANG SILICONE CO LTD D COSMOLINK CO LTD. C Dong Guan Top Nation Electronic Limited. D CLOVER Hi- Tech Co., Ltd. C Dong Guan Top Nation Electronic Limited. D CLOVER Hi- Tech Co., Ltd. type/model technical data STW-B Class B, reinforced insulation 130 C, TIW-M Class B, reinforced insulation 130 C, LL70D-6FC / TN 2 ), 3 ) LL70D-6FC / SC 2 ), 3 ) LL35D-6FC / TN 4 ) LL35D-6FC / SC 4 ) C Hexion GmbH F2736(a)(b) F, V-0, 150 C C YOUNG CHANG SILICONE CO LTD D COSMOLINK CO LTD. C JINGJIANG YAHUA RESSURE SENSITIVE GLUE CO LTD STW-B Class B, reinforced insulation 130 C, TIW-M Class B, reinforced insulation 130 C, CT* (b)(g), CT* (c)(g) or Z* (b) D SYMBIO INC (a) ET, 130 C, C Interchangeable Interchangeable Min. 600 V, Max. 8 A standard IEC UL 2353 IEC UL 2353 Min. 130 C Min. 130 C Min. 130 C Min. 130 C UL 94 IEC UL 2353 IEC UL 2353 ET, 130 C UL 510 UL 510 mark(s) of conformity VDE ( ) UL (E242198) VDE (138053) UL (E213764) UL (E61040) VDE ( ) UL (E242198) VDE (138053) UL (E213764) UL (E165111) UL (E50292) EUT

25 age 19 of 22 Report No: object/part No. El-capacitor (C91) co de manufacturer/ trademark type/model technical data C SAMYOUNG NBC 2 ) Min. 500 V, Max. 47 μf, 105 C D Interchangeable Interchangeable 2 ) Min. 500 V, Max. 47 μf, 105 C C SAMYOUNG NBC 3 ) Min. 500 V, Max. 33 μf 105 C D Interchangeable Interchangeable 3 ) Min. 500 V, Max. 33 μf 105 C C SAMYOUNG NBC 4 ) Min. 500 V, Max. 22 μf 105 C D Interchangeable Interchangeable 4 ) Min. 500 V, Max. 22 μf 105 C FET (Q91) C Interchangeable Interchangeable Min. 600 V, Max. 11 A Transformer (TM01) Magnet wire of Transformer (TM01) C CLOVER Hi- Tech Co., Ltd. D Huizhou Li shin Electronics Limited. C CNICABLE CO LTD D HENG YA ELECTRIC (DONGGUAN) LTD D TAI-I ELECTRIC WIRE & CABLE CO LTD LL70D-6LM / SC LL70D-6LM / LSE UEW TYU-130 (UEW/QA-B) UEW standard Class B Class B olyurethane, 130 C olyurethane, 130 C olyurethane, 130 C UL 1446 UL 1446 UL 1446 mark(s) of conformity EUT EUT EUT EUT EUT EUT EUT UL (E210918) UL (E197768) UL (E85640)

26 age 20 of 22 Report No: object/part No. co de manufacturer/ trademark type/model technical data standard mark(s) of conformity Bobbin of Transformer (TM01) C SUMITOMO BAKELITE CO LTD M-9820 F, V-0, 150 C UL 94 UL (E41429) Transformer (TA01) C Hui Zhou Li shin Electronic Limited. LL60D-4STB7 / LSE 5 ) Class B D Dong Guan Top Nation Electronic Limited. LL60D-4STB7 / TN 6 ) Class B Magnet wire of Transformer (TA01) C HENG YA ELECTRIC (DONGGUAN) LTD TYU-130 (UEW/QA-B), TYA1-130 (UEW/QA-B), olyurethane, 130 C UL 1446 UL (E197768) TYTUN- B130(UEWNY/ Q(A/X)-B,F) 5 ) D TAI-I ELECTRIC WIRE & CABLE CO LTD UEW olyurethane, 130 C UL 1446 (UL E85640) D SHANGHAI ASIA ACIFIC ELECTRIC CO LTD UEW, UEW-U 6 ) olyurethane, 130 C UL 1446 (UL E214423) D E&B TECHNOLIGY CO LTD E&B-100B 6 ) olyurethane, 130 C UL 1446 (UL E333321) Bobbin of Transformer (TA01) C SUMITOMO BAKELITE CO LTD M-9820 F, V-0, 150 C UL 94 UL (E41429) Triple wire of Transformer (TA01) C YOUNG CHANG SILICONE CO LTD STW-B Class B, reinforced insulation 130 C, IEC UL 2353 VDE ( ) UL (E242198) Tube of Transformer (TA01) C GREAT HOLDING INDUSTRIAL CO LTD TFL 5 ) TFE, 200 C UL 224 UL (E156256) D CHANGYUAN ELECTRONICS GROU CO LTD CB-TT-L 5 ) TFE, 200 C UL 224 UL (E180908)

27 age 21 of 22 Report No: object/part No. Insulation / Barrier Tape of Transformer (TA01) Opto-coupler (C01, C02) CB co de C manufacturer/ trademark JINGJIANG YAHUA RESSURE SENSITIVE GLUE CO LTD D 3M COMANY ELECTRICAL MARKETS DIV (EMD) type/model CT* (b)(g), WF* (c)(h) 6 ) technical data standard ET, 130 C UL (a) 6 ) E, 130 C UL 510 D SYMBIO INC (a) 6 ) ET, 130 C UL 510 A Lite-On Technology Corp. D Everlight Electronics Co., Ltd. C Kingboard Laminates Holdings Ltd Insulation sheet A SABIC JAAN L L C otting Compound LTV-10xx (X in the model name can be from 0 to 9, Marked: 1008) EL101X (X in the model name can be from 0 to 9, Marked: EL1018) 110 C Double insulation isolation voltage: V, Ext. cr.: 8.3 mm, Thermal cycling test 110 C Double insulation isolation voltage: V Ext. cr.: 8.1 mm, DTI: 0.4 mm IEC EN IEC IEC KB-5150& V-0, 130 C UL 746 D Interchangeable Interchangeable Min. V-0, Min. 130 C A Dow Corning Corp. D Dow Corning Korea Ltd. FR700 Min. V-0, 130 C, Min 0.43 mm thick. UL 746 UL # Min. 170 C, UL 746 CN-8760 G Min. 150 C, UL 746 mark(s) of conformity UL (E165111) UL (E17385) UL (E50292) Nemko (order No ) VDE ( ) UL (E123995) UL UL (E207780) UL (E40195) UL (E111943)

28 age 22 of 22 Report No: object/part No. co de manufacturer/ trademark type/model technical data standard mark(s) of conformity Output connector *Optional) 7 ) A Japan Solderless Terminal mfg Co., Ltd JWF Series Max. 100Vdc, 3 A, EUT D Japan Solderless Terminal mfg Co., Ltd JWKF series Max. 125Vdc, 3 A, EUT D KET SW series Max. 300 Vdc, Max. 5 A, UL 1977 UL (E101181) The codes above have the following meaning: A - The component is replaceable with another one, also certified, with equivalent characteristics B - The component is replaceable if authorised by the test house C - Integrated component tested together with the appliance D - Alternative component * Component has been certified by UL according to UL standards. Compliance with the requirements of the product standard(s) (see page one of this test report) has been checked. 1 ) The type/model is listed for other certification. 2 ) Used for model OLU700142U1U and OLU700142U1A. 3 ) Used for model OLU550102U1U and OLU550102U1A.. 4 ) Used for model OLU400701U1U and OLU400701U1A. 5 ) Change of type name (Bold letters). 6 ) Addition of an alternative type (Bold letters). 7 ) Addition of output connector as optional (Bold letters). The list of critical component has been reproduced from the main test report. This list has been updated for changes covered in this amendment to test report (changes denoted in bold). This list of critical component is now considered the complete list.

29 age 1 of 4 Report No: Attachment 1: Heating test according to Annex L.6, :2007+A1: 2010+A2:2012 Type reference... : 1) OLU700142U1U, OLU700142U1A 2) OLU400701U1U, OLU400701U1A Lamp used... : LED and DC Load. Mounting position of luminaire... : According to the requirements prescribed in Annex H Supply wattage (W)... : 1) 127 V/ 60 Hz : V/ 60 Hz :66.7 output load: 42.6 Vdc, 1.38 A 2) 127 V/ 60 Hz : V/ 60 Hz :41.1 output load: 48.9 Vdc, 0.69 A Supply current (A)... : 1) 127 V/ 60 Hz : V/ 60 Hz: ) 127 V/ 60 Hz : V/ 60 Hz: 0.14 Calculated power factor... : Table: measured temperatures at ta: 50 C L.6 - Test 1: Normal conditions for OLU700142U1U, OLU700142U1A 1,06 times rated voltage 1.06 x 120 V = V 1.06 x 277 V = V Table: measured temperatures at ta: tc: 85 C L.6 - Test 2: Normal conditions for OLU700142U1U, OLU700142U1A 1,06 times rated voltage 1.06 x 120 V = V 1.06 x 277 V = V Table: measured temperatures at ta: 50 C L.6 - Test 3: Normal conditions for OLU400701U1U, OLU400701U1A 1,06 times rated voltage 1.06 x 120 V = V 1.06 x 277 V = V

30 age 2 of 4 Report No: Attachment 1: Heating test according to Annex L.6, :2007+A1: 2010+A2:2012 (continued) For model OLU700142U1U, OLU700142U1A Temperature ( C) of part Annex L.6 of :2007+A1:2010+A2:2012 normal Test 1 (measured temperatures at ta: 50 C) 127 V/ 60 Hz 293 V/ 60 Hz Limit ( C) 1. Case Tc Line Filter (LX01) Coil X-cap (CX02) body Film-Cap (C71) body FC (L01) Coil FC (L01) Core EL-Capacitor (C91) body Transformer (TA01) ri. Coil *) 9. Transformer (TA01) Sec. Coil *) 10. Transformer (TA01) Core *) 11. Transformer (TM01) ri. Coil *) 12. Transformer (TM01) Sec. Coil *) 13. Transformer (TM01) Core *) 14. Ambient *) The limit minus 10 C due to it is measured by thermocouple.

31 age 3 of 4 Report No: Attachment 1: Heating test according to Annex L.6, :2007+A1: 2010+A2:2012 (continued) For model OLU700142U1U, OLU700142U1A Temperature ( C) of part Annex L.6 of :2007+A1:2010+A2:2012 normal Test 2 (measured temperatures at tc: 85 C) 127 V/ 60 Hz - Limit ( C) 1. Case Tc Line Filter (LX01) Coil X-cap (CX02) body Film-Cap (C71) body FC (L01) Coil FC (L01) Core EL-Capacitor (C91) body Transformer (TA01) ri. Coil *) 9. Transformer (TA01) Sec. Coil *) 10. Transformer (TA01) Core *) 11. Transformer (TM01) ri. Coil *) 12. Transformer (TM01) Sec. Coil *) 13. Transformer (TM01) Core *) 14. Ambient *) The limit minus 10 C due to it is measured by thermocouple.

32 age 4 of 4 Report No: Attachment 1: Heating test according to Annex L.6, :2007+A1: 2010+A2:2012 (continued) For model OLU400701U1U, OLU400701U1A Temperature ( C) of part Annex L.6 of :2007+A1:2010+A2:2012 normal Test 3 (measured temperatures at ta: 50 C) 127 V/ 60 Hz 293 V/ 60 Hz Limit ( C) 1. Case Tc Line Filter (LX01) Coil X-cap (CX02) body Film-Cap (C71) body FC (L01) Coil FC (L01) Core EL-Capacitor (C91) body Transformer (TA01) ri. Coil *) 9. Transformer (TA01) Sec. Coil *) 10. Transformer (TA01) Core *) 11. Transformer (TM01) ri. Coil *) 12. Transformer (TM01) Sec. Coil *) 13. Transformer (TM01) Core *) 14. Ambient *) The limit minus 10 C due to it is measured by thermocouple.

33 age 1 of 5 Report No: Attachment 2: ictures For models OLU700142U1U and OLU700142U1A Inside CB top without potting compound Inside CB Bottom without potting compound

34 age 2 of 5 Report No: Attachment 2: ictures (continued) For models OLU550102U1U and OLU550102U1A Inside CB top without potting compound Inside CB Bottom without potting compound

35 age 3 of 5 Report No: Attachment 2: ictures (continued) For models OLU400701U1U and OLU400701U1A Inside CB top without potting compound Inside CB Bottom without potting compound

36 age 4 of 5 Report No: Attachment 2: ictures (continued) Transformer (TM01) construction

37 age 5 of 5 Report No: Attachment 2: ictures (continued) Transformer (TA01) onstruction

38 age 1 of 1 Report No: Attachment 3: Creepage distances and clearances according Annex I.11 of :2006 Clause 18 (16) TABLE: Cleepage distances and clerances Type ower Supply 277 V, 60 Hz ollution degree 1 CTI rating III or IIIa Connection between protective earth and secondary ground Yes No Measuring oints Measured Voltage Clearance Dist. (mm) Creepage Dist. (mm) V peak V rms Required Measured Required Measured B Live Neutral ) ) 3.8 R CY1 (pri) CY1 (sec) R R R R C01 (pri) C02 (pri) TM01 (pri. pins) TA01 (pri. pins) C01 (sec) C02 (sec) TM01 (sec. pins) TA01 (sec. pins) R Live Metal enclosure ) ) ) ) ) ) ) ) ) ) 7.4 B= Basic insulation, R= Reinforce insulation, S= Supplementary insulation TA01 core is considered primary part. Internal potting compound was considered. 1 ) Highest working voltage is applied. 2 ) Linear interpolation used.

39 age 1 of 1 Report No: Attachment 4: CB layout Top Silk Bottom Silk Bottom attern

40 age 1 of 8 Report No: Attachment 5: Transformer specification Transformer, TM01

41 age 2 of 8 Report No: Attachment 5: Transformer specification (continued) Transformer, TM01

42 age 3 of 8 Report No: Attachment 5: Transformer specification (continued) Transformer, TM01

43 age 4 of 8 Report No: Attachment 5: Transformer specification (continued) Transformer, TM01

44 age 5 of 8 Report No: Attachment 5: Transformer specification (continued) Transformer, TA01

45 age 6 of 8 Report No: Attachment 5: Transformer specification (continued) Transformer, TA01

46 age 7 of 8 Report No: Attachment 5: Transformer specification (continued) Transformer, TA01

47 age 8 of 8 Report No: Attachment 5: Transformer specification (continued) Transformer, TA01

48 age 1 of 3 Report No: Attachment 6: Instruction manual

49 age 2 of 3 Report No: Attachment 6: Instruction manual (continued)

50 age 3 of 3 Report No: Attachment 6: Instruction manual (continued) - End of test report -