MODA. Technical Guide. June. Date of print/release

Transcription

1 Date of print/release June 2017 Technical Guide MODA Please Note: The information shown in this literature is accurate as at the date of print/release shown on such information but it may be subject to changes after such date. Please therefore ensure that you are viewing the most current product available and check with us if you have any doubt about the suitability of the product or accuracy of the information shown.

2 IMPORTANT PLEASE NOTE: The information contained in this literature is for illustrative purposes only to assist in choosing your desired kitchen. While we endeavour to keep the information up to date and correct we do not make any representations or warranties of any kind, express or implied, about the completeness, accuracy, reliability and suitability of the doors and products that appear in this literature. We aim to showcase as many different items as possible and therefore some products have been installed and photographed purely to show as many of our product features as possible and they should not be taken as an example of how they are intended to be installed in real kitchen installations. It is therefore the responsibility of the installer to check the corresponding manufacturer s installation information and the manufacturer s technical information to ensure this is up to date and to ensure that the products can be fitted in a way they are displayed and the products are suitable for your requirements. We specifically exclude any liability in this regard unless the products are fitted in accordance with the specifications we supply and the manufacturer s installation recommendations are used in a way recommended by the manufacturer and in accordance with the manufacturer s technical information provided. The information shown in this literature is accurate as at the date of print/release shown on such information but it may be subject to changes after such date. Please therefore ensure that you are viewing the most current product information available and check with us if you have any doubt about the suitability of the product or accuracy of the information shown. We are proud that all our products that we sell are covered by a statutory warranty but this does not stop all our products naturally ageing overtime. As a result of this natural ageing process we are therefore unable to provide an identical colour finish to the existing products you have purchased from us with any products that we supply you from the same product line. In such event our liability will be limited to the purchase price paid for the product you are seeking to replace. Due to the limitations on photographic reproduction, colours may differ slightly from the actual products shown. Please note that board matches listed with the doors are a suggestion only and better board matches may be available on the market. It is up to the individual to decide on its suitability.

3 WHITE Features Made in Italy This product is made in Italy. Stock Door This door range is available from stock. Made to Measure Sizes Made to measure sizes are also available for this range. Suggested MFC Board Match Egger W980 Please note that board matches listed with the doors are a suggestion only and better board matches may be available on the market. It is up to the individual to decide on its suitability. Curved Doors & Accessories External curved doors and accessories are available for this door range. 3

4 PLATINUM Features Made in Italy This product is made in Italy. Stock Door This door range is available from stock. Made to Measure Sizes Made to measure sizes are also available for this range. Suggested MFC Board Match Egger W708 or Kronospan 0191 Please note that board matches listed with the doors are a suggestion only and better board matches may be available on the market. It is up to the individual to decide on its suitability. Curved Doors & Accessories External curved doors and accessories are available for this door range. 4

5 PAVILION Features Made in Italy This product is made in Italy. Stock Door This door range is available from stock. Made to Measure Sizes Made to measure sizes are also available for this range. Suggested MFC Board Match Egger U727 Please note that board matches listed with the doors are a suggestion only and better board matches may be available on the market. It is up to the individual to decide on its suitability. Curved Doors & Accessories External curved doors and accessories are available for this door range. 5

6 ANTHRACITE Features Made in Italy This product is made in Italy. Stock Door This door range is available from stock. Made to Measure Sizes Made to measure sizes are also available for this range. Suggested MFC Board Match Egger U961 or Kronospan 0164 Please note that board matches listed with the doors are a suggestion only and better board matches may be available on the market. It is up to the individual to decide on its suitability. Curved Doors & Accessories External curved doors and accessories are available for this door range. 6

7 Product Description Product Colour Product Finish Base Material Base Thickness Covering Material Edging Colour Reverse Colour Product Dimension Slab door with J shaped groove White / Platinum / Pavilion / Anthracite Matt MDF 22mm Painted with White / Platinum / Pavilion / Anthracite polyurethane matt paint To match with face To match with face (Moda White reverse is a white melamine back unpainted) Standard door and drawer range Additional Information Accessories are painted. Door / Drawer paint information: 22mm MDF with melamine back. Moda White has a White melamine back (not painted), the other colours have a melamine back which is painted to match the face. Panels information: 18mm MFC double sided white melamine square edged with paintable ABS edging. Matt painted on front, edges and rear with polyurethane matt paint. The exception is Moda White panels which are not painted on the reverse as the White melamine back is a suitable match to the face. 7

8 DOOR/DRAWER & ACCESSORY DESCRIPTIONS CODE DESCRIPTION CODE DESCRIPTION XXX x 596mm slab oven filler XXX x 596mm door XXX x 296mm door XXX x 147mm door XXX x 396mm door XXX71514W 715 x 147mm slab door XXX x 446mm door XXX x 256mm door XXX14049 XXX14059 XXX14079 XXX14089 XXX14099 XXX17539 XXX x 496mm door 140 x 596mm door 140 x 796mm door 140 x 896mm door 140 x 996mm door 175 x 396mm door 175 x 496mm door XXX71527R1 XXX71527L1 XXX71529 XXX71531R XXX71531L XXX x 273mm door (corner wall door RH)** 715 x 273mm door (corner wall door LH)** 715 x 296mm door 715 x 313mm door (corner base door RH)** 715 x 313mm door (corner base door LH)** 715 x 345mm door XXX x 596mm door XXX x 396mm door XXX x 496mm door XXX x 446mm door XXX x 596mm door XXX x 496mm door XXX x 796mm door XXX x 546mm door XXX x 896mm door XXX x 596mm door XXX x 996mm door XXX x 296mm door XXX35549 XXXSB35549 XXX35559 XXXSB35559 XXX35579 XXXSB35579 XXX35589 XXXSB x 496mm door 355 x 496mm slab door (for bi-fold)* 355 x 596mm door 355 x 596mm slab door (for bi-fold)* 355 x 796mm door 355 x 796mm slab door (for bi-fold)* 355 x 896mm door 355 x 896mm slab door (for bi-fold)* XXX89539 XXX89544 XXX89549 XXX89559 XXX98059 XXX XXX XXX XXX x 396mm door 895 x 446mm door 895 x 496mm door 895 x 596mm door 980 x 596mm door 1245 x 296mm door 1245 x 396mm door 1245 x 446mm door 1245 x 496mm door XXX x 996mm door XXX x 596mm door XXXSB35599 XXX45059 XXX49559 XXX57029 XXX57039 XXX57044 XXX57049 XXX x 996mm slab door (for bi-fold)* 450 x 596mm door 495 x 596mm door 570 x 296mm door 570 x 396mm door 570 x 446mm door 570 x 496mm door 570 x 596mm door XXXF35579 XXXF35599 XXXF71539 XXXF71549 XXXCURVE XXXCORNICESQ XXXCURVECORNICES 355 x 796mm frame door 355 x 996mm frame door 715 x 396mm frame door 715 x 496mm frame door 715mm external curved door 50 x 30 x 3000mm square end straight cornice / pelmet 338 x 338 x 30mm square end curved cornice / pelmet 8

9 DOOR/DRAWER & ACCESSORY DESCRIPTIONS CODE DESCRIPTION CODE DESCRIPTION XXXPLINTH 150 x 3050mm plinth XXXEP x 350 x 18mm end panel slab XXXCURVEPLINTH 608 x 338 x 150mm curved plinth XXXEP x 650 x 18mm end panel slab XXXENDPOST XXXCPSLAB XXXCPSHAPED XXXCPEXTERNAL 2400 x 80 x 50mm curved end post 715 x 40 x 40mm internal corner post slab 715 x 40 x 40mm internal corner post shaped 900 x 60 x 60mm external corner post shaped XXXEP XXXEP XXXEPSHAPE x 650 x 18mm end panel slab 2400 x 900 x 18mm end panel slab 900 x 650 x 22mm end panel shaped * 355 Slab doors are for the top door of a bi-fold system to allow for the fitting of the mechanism. ** Corner doors are handed and it is advised that both LH and RH corner doors are purchased. When ordering please replace XX with the prefix code below: White: 210 Cream: 211 Black: 212 Anthracite: 213 Please note that the J shape handle design on this door is different to the Lucente range. 9

10 Grain Direction None None Drawer Grain Direction None None Door Grain Direction Panel Grain Direction Door Slab door with J shaped groove. Corner Door Corner door with J shaped groove, solid at one end. We advise that both RH & LH corner doors are purchased together. XXX71531R (BASE CORNER RH) / XXX71531L (BASE CORNER LH) XXX71527R1 (WALL CORNER RH) / XXX71527L1 (WALL CORNER LH) Base Door LH 313mm wide Base Door RH 313mm wide Wall Door LH 273mm wide Wall Door RH 273mm wide 10

11 355mm Slab Door Slab doo, painted MDF. 355mm Slab doors are for the top door of a Bi-Fold system to allow for the fitting of the mechanism. Sizes available: 355 x 496 / 355 x 596 / 355 x 796 / 355 x 896 / 355 x x 596 is also a slab door. Section Through A-A Shaped End Panel Shaped panel with J shaped groove. Other end panels which are SLAB are 18mm MFC and have no shaped groove, they are slab only. XXXEPSHAPE900 11

12 Glazed Door (355mm Tall) Glazed door with J shaped groove. Clear toughened glass. Detail A Framed Door (355mm Tall) Framed door with J shaped groove. Detail A Framed Door (715mm Tall) Framed door with J shaped groove. Detail A 12

13 Curved Door (External Curve) Curved door with J shaped groove. Height of door: 715mm XXXCURVE Square End Curved Cornice / Pelmet (External Curve) XXXCURVECORNICES Curved Plinth (External Curve) XXXCURVEPLINTH 13

14 Square End Straight Cornice / Pelmet XXXCORNICESQ Plinth XXXPLINTH Curved End Post XXXENDPOST 14

15 Corner Post Slab XXXCPSLAB Corner Post Shaped Shaped corner post enables a bespoke look and allows the handle detail to flow around the kitchen. XXXCPSHAPED External Corner Post The external corner post enables a bespoke look and allows the handle detail to flow around the kitchen. This product is to be used with the End Panel Shaped. XXXCPEXTERNAL End Panel Shaped External Corner Post Door External corner post shown assembled 15

16 Contact us Telephone Fax Free-Fax Web Order Address Unit 3 Cranberry Drive Denton Manchester M34 3UL Area Sales Scotland North East Yorkshire North West Merseyside, North Wales & West Cheshire East Midlands West Midlands South West & South Wales London & Home Counties (North) London & Home Counties (South) Northern Ireland All goods are sold subject to our Terms and Conditions of Sale which are available upon request. 16