Welcome to my House. Controlled ventilation for a healthy environment: our full program of ventilation technology. Window hardware.

Transcription

1 Fresh ir. Welcome to my House. Controlled ventilation for a healthy environment: our full program of ventilation technology. Window hardware door hardware sliding door hardware ventilation and building technology

2 2 Modern living is a question of the right system.

3 How we ventilate is how we live. Our houses used to breathe through unsealed gaps in windows and doors. However, modern or renovated building shells are air-tight. On the one hand this is desired, because it minimises the amount of wasted energy. On the other hand, it has become more difficult to ventilate modern homes properly just by opening the window. Either the quantity or the duration of ventilation is excessive, cancelling out any energy savings. Or the house is ventilated too little, damaging the health of the inhabitants and the structure of the building. What is to be done? In order to reconcile energy efficiency with a sufficient supply of fresh air, the building shell must be seen as a whole. This holistic view is SIEGENIA-AUBI s great advantage. With our goal of adding functionality to windows and doors and creating light, airy, and welcoming rooms, we develop innovative and complete solutions with our partners for window and door fittings and ventilation and building technology. In this brochure we want to present our wall-mounted and window-mounted ventilators to architects, building owners, window installers and end users. Our innovations in heat recovery and filter technology are of particular importance. Innovation is a tradition at SIEGENIA-AUBI. And this has held true for four generations. To secure our place as an industry leader in innovation, we invest heavily in researching and developing solutions that are intelligent and in line with the market. These solutions are extensively tried and tested to ensure reliability and suitability for everyday use. Here, our quality standards extend far beyond what is required by legal guidelines. SIEGENIA-AUBI headquarters, Wilnsdorf. 3

4 4 It s no secret that you need to ventilate.

5 Controlled ventilation for an indoor environment that is positive in every way. A well controlled, healthy indoor environment performs several tasks at the same time. It doesn t just support our well-being and productivity, it also offers lasting protection to the building structure from humidity and mould. Intelligent solutions are needed to satisfy energy concerns in the ventilation of buildings. This is because conventional window ventilation is reaching its limit. The use of controlled ventilation technology also offers real advantages in protection from intruders. Effective protection from mould, damage caused by humidity and safety hazards. Healthy fresh air without harmful substances or noise. Truly cost effective and sustainably energy efficient. Protecting the building structure from mould and damage caused by humidity requires sufficient ventilation not always a matter of course with building shells that are increasingly air-tight. It is neither reasonable to expect nor possible in practice for a tenant, for example, to open all windows several times a day. According to current law, the landlord is responsible for ensuring that sufficient ventilation is possible, such as installing decentralised ventilation units. This is not only effective protection against damage to the building structure. Ventilating with closed windows instead of tilted or even open windows increases protection against break-ins. Your well-being, productivity and quality of life are all influenced by the air. A lower CO 2 level helps concentration. An optimal relative humidity of % keeps bacteria, viruses and mould at bay. The damage caused by fine dust, fumes and pollen can also be kept in check with the right technology. However, protection from noise is always a must for a truly untroubled feel-good atmosphere. The continually increasing noise pollution from road, rail and air traffic is today the number 1 stress factor. Insomnia, heart and digestion troubles and even deafness are possible consequences. With the new German energy saving regulations (EnEV) and the energy performance certificate, the goal of a large reduction in the energy consumption of buildings was clearly set. This is possible with well insulated and particularly air-tight building shells, which considerably reduce heat loss and heating costs as a result. But even controlled ventilation technology using window-mounted and wall-mounted ventilators is a deciding factor here. This is because exchanging the air conventionally by opening the window will very quickly cancel out the saved heating energy. For this reason, many incentive programmes also support the installation of energy-efficient ventilation devices in many cases % Trend of energy loss in different ventilation systems 83 % % kwh/year Window ventilation Basic ventilation Supply and exhaust air unit with heat recovery 5

6 Window ventilators Page 10 AEROMAT VT with heat recovery The compact window-mounted ventilator with heat recovery, optimal air throughput and high sound absorption. Window ventilators NE 13 AEROMAT midi The intelligent passive ventilator with the double locking mechanism. NE Page 18 AEROPAC The small sound-absorbing ventilator with big features: quiet, powerful, easy to use, quick to install. 6 AEROMAT VT First-rate window-mounted ventilator with a modular design. Versatility even for demanding façade solutions. Page 12 AEROMAT intense The flexible, passive sound absorbing ventilator with adaptable installation and design. W Wall-mounted ventilators 11 AEROMAT mini Window rebate ventilator with optional turn lock. W 19 AEROVITAL The universal ventilator with pollen protection, heat recovery and total convenience AEROLIFE The energy saving universal ventilator with pollen protection and heat recovery.

7 Our entire range of ventilation technology. The right solution for every need. An overview of the many different configuration options: Ventilator type Airflow Filter technology Ventilator features Active ventilator Supply air Coarse dust filter Sound insulation Passive ventilator Supply air and exhaust air Fine dust and pollen filter Humidity control Supply air or exhaust air Activated carbon filter Heat recovery Suitable for bedrooms 14 AEROMAT 80 Needs-based passive ventilator with minimal installation height. AEROMAT 100 Controlled fresh air supply with the best sound absorption. 20 AEROPLUS The pro for indoor climate control and dehumidification. NE 15 W 15 AEROMAT 150 Highest air throughput without draughts for large rooms. Sensors 21 SENSOAIR he intelligent air quality sensor with CO2 and VOC control for activating windowmounted and wall-mounted ventilators. 7

8 8 Our window-mounted ventilators: Keep the windows closed and open new horizons for comfortable living.

9 A warm recommendation: window ventilators with heat recovery. SIEGENIA-AUBI offers an extensive range of innovative ventilation units for installation in or around windows. Whether nearly invisible or visually striking, our ventilation systems are more than just powerful. They are exceptionally versatile and flexible, thanks to their modular design. This allows even the most demanding and unusual of projects to be realised exactly as planned. Energy efficient ventilation. The best example of the possibilities and advantages of intelligent ventilation technology is heat recovery. Here, it is ultimately all about a good exchange. The heat in the used exhaust air is transferred to the inflowing fresh air through a special heat exchanger, allowing the fresh air to be pre-heated. This supports a healthy living environment and provides lasting protection for the building while saving energy efficiently in line with the German energy saving regulation EnEV. Active or passive ventilators? A fundamental property of a window-mounted ventilator is its classification as an active or passive ventilator. A passive device (without a fan) is based on the natural pressure differential between cooler outer air and the heated, used air in the room and ensures a controlled exchange of air. Where there is an artificially created pressure differential due to centralised or decentralised ventilation (e.g. in the kitchen or bathroom), a passive device ensures there is a supply of fresh outdoor air. An active ventilator has a motorised fan to provide controlled ventilation. The heat recovery principle: Fresh, cold outdoor air is drawn in Used, warm air from the room is extracted Path through the heat exchanger: The heat from the exhaust air is transferred to the supply air, warming it up Reduced heating costs and air humidity in the room Installation in the window lintel 9

10 AEROMAT VT with heat recovery The compact window-mounted ventilator with heat recovery, optional air throughput and extensive sound absorption. Thanks to continuous and rigorous development, the AEROMAT VT with heat recovery is versatile enough to be installed as required: from every angle, this window ventilator is a real winner. This is principally due to the excellent heat recovery efficiency of up to 62%, without any formation of condensation, and its particularly high air throughput whilst simultaneously keeping internal noise to a minimum and providing effective sound insulation. Its versatility is evident during installation: with an installation depth of just 320 mm and a length of only 1000 mm, it can be easily integrated into almost any façade. The low profile of 100 mm even allows for concealed installation, such as in the top of the window lintel area. Installation features: Optimal integration in façade due thanks to compact design Concealed installation possible Suitable for renovations and new construction AEROMAT VT with heat recovery product features: Healthy indoor environment due to simultaneous ventilation and extraction: stale, humid air in the room is replaced with pre-heated, fresh air Suitable for living spaces (bedrooms, children s rooms, hotel rooms, etc.), schools and office buildings Heat recovery: thermal efficiency of up to 62 % without the formation of condensation High air throughput with two-stage radial blower (air volume up to 42 m 3 /h) with low internal noise Effective sound absorption of over 50 db Optimum control via the intelligent SENSOAIR air quality sensor With optional F7 and G3 filters Easy filter replacement without disassembling the unit Variant tested in accordance with VDI 6022 also available 10 Installation in the window lintel Installation in the window sill Upright installation

11 AEROMAT VT Top-rate window-mounted ventilator with a modular design: versatility even for demanding façade solutions. Technically demanding projects require flexible solutions. The AEROMAT VT keeps all options open thanks to its modular design and can be adapted to optimally suit individual requirements. Its first-rate properties are impressive from effective sound absorption and low energy consumption to optional heat recovery. AEROMAT VT product and installation features: High sound absorption and high air throughput for low energy consumption and individual air volume control Optional white clamping and casing profiles Modular, individually customisable ventilator design: e.g. with heat recovery and integration in building control systems Problem-free installation and adaptation to building structure Optimal integration in façade thanks to low-profile design Customer-specific installation variants of the AEROMAT VT: In many years working with architects and specialist planners, proposals for almost every type of installation have arisen from concealed integration in the façade to inclusion in the design. Installation below the ceiling: Secured to the ceiling with a hole drilled through the supporting parts for static reasons. Upright installation next to the window: Ventilation even when the roller shutter is down thanks to the upright installation between the window reveal and the window frame/guide rails of the roller shutter open air access between the guide rails and the masonry. The 2 variants of the standard AEROMAT VT unit: AEROMAT VT DS: Passive pressure differential ventilator with individual control of the air flow rate. AEROMAT VT RS: Motor-driven ventilator with 2 power levels and low internal noise. Installation with channel concealed in the window sill Installation in the window lintel AEROMAT VT accessories: Weather grille for installation in the impost Window sill channel Electric lock Insect grille Flap trap G3 and F7 filters Indicator lamp for ventilator operation 11

12 AEROMAT intense The flexible, passive sound absorbing ventilator with adaptable installation and design. NEW For individually tailored ventilation, AEROMAT intense uses the natural pressure differential. Its impressive features include total flexibility and the ability to adapt to a variety of conditions benefits that would be hard to find elsewhere. The wide range of options for variation in terms of internal design enable sound absorption and air throughput to be customised and both the automatic regulation of the air flow in the case of major pressure differentials and the integrated thermal separation offer energy saving advantages. To ensure that the fresh air entering the house is always clean, AEROMAT intense has a front profile that can be clipped on, which facilitates maintenance without the need for tools and easy cleaning of the interior. This tailor-made and attractive solution features an installation height of only 100 mm. The elegant AEROMAT intense can be installed in the glazing rebate, in the impost or concealed. Different installation lengths and device depths provide for maximum design flexibility. Installation features: Device heights of only 100 mm irrespective of the variable internal design Concealed installation also possible Suitable for renovations and new buildings AEROMAT intense product features: Sound absorption and air throughput are flexible: five device depths and four vent heights Attractive design with smart countours Maintenance without need for tools, easy to clean Self-regulating air-flow flap Safe, fibre-free insulation Thermal separation Colours: White and EV1 Manual operation to right or left, optional pull cord 12 Installation in impost Installation in glazing rebate Concealed installation

13 AEROMAT midi The intelligent passive ventilator with the double locking mechanism. NEW The secret to AEROMAT midi s success is its inner qualities to be precise: its intelligent design with a double locking mechanism.. Also impressive are the air flow limiter and the insect screen which is integrated into the weather grille. Thanks to these intelligent features, the natural pressure differential facilitates ventilation, reliably and automatically satisfying the need for fresh air, whilst ensuring exceptionally high levels of comfort. In a nutshell, it provides pleasantly powerful ventilation suited to your needs. AEROMAT midi is also ideal for use as an air vent for a central air extraction system. The attractive appearance of the ventilator is enhanced by the lack of visible fixing screws. User-friendliness is also taken seriously: the AEROMAT midi can be dismantled simply without any tools, making cleaning easy. Installation features: Use with or without channel The small size of the weather grille permits use with many roller shutters Sound insulating elements possible internally and externally AEROMAT midi product features: Intelligent design with double locking mechanism Air flow limiter Insect screen integrated into weather grille Concealed fixing screws ensure attractive appearances Fan can be dismantled without tools to allow for easy cleaning Installation in frame Installation in sash Installation in frame and sash 13

14 AEROMAT mini Window rebate ventilator with optional turn lock. AEROMAT 80 Needs-based passive ventilator with minimal design height. As an energy-saving passive ventilator, the AEROMAT mini offers big features in the smallest space. Its fresh air supply with volumetric flow limiter ensures a comfortable atmosphere. The AEROMAT mini can be easily installed in timber, PVC and aluminium windows so that it is almost invisible. AEROMAT mini product features: Controlled, steady fresh air supply with closed windows Heating costs saved thanks to passive ventilation Mould prevention and protection from humidity in accordance with DIN Concealed in window rebate and easy to upgrade Self-regulating volumetric flow limiter stop draughts Installation features: Fast and easy integration in production processes Narrow design for flexible installation and very small sash sizes Horizontal installation at the top and on the hinge side with standard screws Big features in a small package. At a height of just 80 mm, this passive ventilator can be installed easily and flexibly in every type of window. Despite its slim dimensions, it excels through its excellent sound absorption. Without any electricity consumption or noise pollution from outside, it provides the fresh air needed using the pressure differential for a comfortable and healthy atmosphere indoor environment. This makes the AEROMAT 80 perfect for bedrooms and living spaces too. AEROMAT 80 product features: Supply of fresh air as needed with closed windows Effective sound absorption to stop noise pollution Diffused air outlet prevents draughts Air throughput as needed: approx m 3 /h at 10 Pa Installation features: Can be integrated in any window design thanks to height of just 80 mm Variable installation: Upright next to window or horizontal above/below window 14 Installation in sash glazing rebate Installation in frame glazing rebate

15 AEROMAT 100 Controlled fresh air supply with the best sound absorption. AEROMAT 150 Highest air throughput without draughts for large rooms. Passive or active? That is the question. The AEROMAT 100 can be both. Depending on the type, it can ventilate rooms with excellent sound insulation and low energy consumption using the pressure differential or a fully adjustable fan. This window-mounted ventilator is suitable for private use as well as use in offices, hospitals and hotels. It is available in three different variants to make the individual uses possible. AEROMAT 100 Type D: Passive ventilator only without fan Operated by hand or with a control rod (type DG) AEROMAT 100 Type A: Axial fan with fully adjustable speed controlled via a handle Optionally switchable between ventilation and exhaust Operated by hand or with a control rod (type AG) AEROMAT 100 Type F2: In contrast to type A: operated with four switches Electrical closing flap As much performance as you need: The high, dual-level air throughput with low operational noise makes the AEROMAT 150 predestined for office and administration buildings. Draughts are completely avoided in the air outlet over the entire length of the ventilator. Depending upon the requirements, the ventilator is available as a passive or active unit and can be installed in various ways in all window frames made of timber, PVC or light metal: horizontally above or below the window or vertically next to the window. AEROMAT 150 Type DD: Sound absorbing, thermally separated air supply element for integration in window or façade systems Without fan (passive ventilator) operated with turning knob AEROMAT 150 Type AW4: Axial fan with adjustable speed controlled via a control switch Optionally switchable between ventilation and exhaust Group switching possible Installation in sash glazing rebate Installation in frame glazing rebate Installation in frame glazing rebate 15

16 16 Our wall-mounted ventilators: A small investment with a big payoff.

17 Flexible upgrade solutions. Wall-mounted ventilators from SIEGENIA- AUBI don t just provide a controlled supply of fresh air. They also assume a range of important additional functions for the wellbeing of people. Depending on the type of ventilator, capabilities stretch from optimal sound absorption and heat recovery, to integrated protection from humidity and highly effective filter technology. Particularly in renovations, there is a lot to be said for using high performance wallmounted ventilators. They can also be integrated very flexibly in the building plans at a later date. There is no need to replace the window and the ventilator installation is impressively quick and easy without the trouble of laying pipes through the rooms. When it comes down to it, this not only keeps costs low, the dust-free installation also avoids the bothersome mess caused by construction. Beyond the installation features, our wallmounted ventilators also excel for being notably user and maintenance friendly. Let s look at the AEROPAC as an example. Maintenance consists of simply removing and washing the filter one to two times a year or replacing it. The integrated filter change indicator signals the best time for this. The front panel that can be opened by hand and the use of filter cassettes enable the filter to be changed quickly and conveniently without any tools. Quick and clean installation in around 45 minutes: 1. Use a drill template to align the drill with the suction device 2. Cut the pipe length down to thickness of the wall, install carefully and seal on both sides 3. Install the ventilator on the wall 4. Mount and seal the weather grille to the outer wall. Plug the ventilator into a plug socket and it is ready for use

18 AEROPAC The small sound-absorbing ventilator with big features: quiet, powerful, easy to use, quick to install. SIEGENIA-AUBI QUALITY Years AEROPAC-WARRANTY There is a proven solution to the increased noise pollution of the fresh air supply faced in many projects: the sound-absorbing ventilator AEROPAC compact, quiet as a whisper with well over one hundred thousand installations. In combination with sound insulated windows, its sound absorption makes your own four walls a place of quiet and relaxation again, regardless of road, rail or air traffic outside. Other environmental problems like fine dust and pollen stay outside too, thanks to three different, optional filters. The air throughput of the AEROPAC can be conveniently set as required to several levels via the LCD. This little all-rounder consumes just 5 W at 60 m 3 /h. Fresh air without the noise, pollen or fine dust: Controlled suction of fresh air from the outer wall low-noise, energy saving and with the best noise absorption The air is cleaned through a coarse dust filter, an optional pollen/fine dust filter or an activated carbon filter Individual control via a slider on the side even, draught-free fresh air supply AEROPAC product features: Highly effective sound absorption for peaceful, quiet sleep Draught-free ventilation, quiet as a whisper LCD: Air flow setting and programmable timer Individual air control via slider on the side 3 optional filters: coarse dust, activated carbon, fine dust and pollen filters Filter cassettes and a change indicator make changing the filter easy Extremely small dimensions and elegant, high-gloss casing Can be subsidised by up to 100 %, 5 year product guarantee Can be controlled via Z-Wave wireless system AEROPAC can be easily installed Simple filter replacement: Open the ventilator hood to easily remove and clean or replace the filter 18

19 AEROVITAL The universal ventilator with pollen protection, heat recovery and total convenience. On and off according to plan: our AEROVITAL wall-mounted ventilators increase the quality of life and reduce heating costs at the same time. Many people suffer from allergies and are exposed to the effects of the allergens all day. This means that the windows at home have to be kept closed. This results in a poor indoor environment, limiting the sense of well-being and productivity. AEROVITAL provides a supply of fresh air with closed windows. Its pollen filter allows allergy sufferers to breathe freely again and brings new vitality to the building. AEROVITAL product features: Pollen-filtered supply of fresh air with closed windows Low internal noise and integrated, high sound absorption Lower heating costs thanks to heat recovery of up to 73 % Indicates room temperature, air humidity and whether the filter needs to be replaced Convenient remote control and backlit LCD Automatic temperature and humidity control Blower switchable between 10 levels Individual settings can be programmed Integrated closing flaps Simple installation: Drill an opening with a diameter of 12 cm in the outer wall Put pipe and weather grille in place On-wall and in-wall mounting possible The heat exchanger for AEROVITAL and AEROLIFE : Fresh, cold outdoor air is drawn in Used, warm air from the room is extracted Path through the heat exchanger: the heat from the exhaust air is transferred to the supply air, warming it up In-flow of heated, fresh air through a side opening prevents draughts On-wall installation In-wall installation 19

20 AEROLIFE The energy-saving universal ventilator with pollen protection and heat recovery. AEROPLUS The pro for indoor climate control and dehumidification. NE This wall-mounted ventilator scores well too for its energy saving ventilation without noise pollution and its pollen filter system. This makes it an especially good solution for bedrooms and living spaces. Both AEROLIFE and AEROVITAL are suitable for new construction and renovation thanks to their trouble-free installation. AEROLIFE product features: Blower can be switched between 3 levels at the device Backlit LCD Pollen filtering Heat recovery of up to 66 % Indicates room temperature, air humidity and whether the filter needs to be replaced Integrated closing flaps This wall-mounted ventilator increases quality of life and offers intelligent protection for people and buildings. Its automatic ventilation and humidity control adjusts itself to the temperature and humidity of the air in the room that are required. This allows the AEROPLUS to achieve an optimal, healthy living environment and effectively prevents damage to the building structure and the formation of mould. The heat recovery feature, which results in reduced heating costs, makes this an effective and economic solution. Simple installation: Drill an opening with a diameter of 12 cm in the outer wall Put pipe and weather grille in place On-wall and in-wall mounting possible 20 On-wall installation In-wall installation W AEROPLUS product features: Healthy living environment and building structure protection against damage caused by humidity Automatic control of the room atmosphere, configured to the measured temperature and humidity of the air in the room Filtered, pre-heated air supply Automatic removal of stale air that is too humid Environmentally friendly heat recovery of up to 50 % without condensation 12 V low voltage for increased safety, ideal for bathrooms Available with an optional electrical pipe lock Reduced energy consumption due to EC technology On-wall installation In-wall installation

21 SENSOAIR The intelligent air quality sensor with CO 2 and VOC control for activating window-mounted and wall-mounted ventilators. The SENSOAIR gives you the green light for clean air and a healthy sense of well-being for full productivity. The intelligent air quality sensor registers many different types of pollution in the room air before the human body can even react and the recommended values have been exceeded. By automatically activating wall-mounted or window-mounted ventilators as needed, it combats CO 2, nicotine, smoke and unpleasant odours. For a quality of air that can be seen. The current status of the air in the room can be checked with a look at the ventilation traffic lights integrated into the casing. Increase of the CO 2 concentration in the air in the room CO 2 concentration Limit of comfort SENSOAIR product features: Recognises many different pollutants in the room air For simple, convenient and needs-based ventilation Elegant design, trouble-free installation Can be used anywhere with conventional wiring or via a wireless Z-Wave connection SENSOAIR basic table unit SENSOAIR plus for controlling ventilation devices and motorised drives SENSOAIR wave for integration in Z-Wave wireless systems Closed window Closed window, open window Controlled ventilation, closed window Example of device control: Time SENSOAIR detects poor room air and transmits control signals wirelessly or via cable to wall-mounted ventilators such as AEROPAC, which supplies fresh air to the room 21

22 Window ventilators AEROMAT 80 AEROMAT 100 Ventilator type D* D* A F2 Sound absorption in accordance 21 db / with DIN EN R W1,9 / D n,e,w 28 db 33 db / 40 db 36 db / 43 db 40 db / 47 db 39 db / 46 db 42 db / 49 db 39 db / 46 db 39 db / 46 db Air throughput at 2 Pa 38 m 3 /h 13 m 3 /h 11 m 3 /h 7 m 3 /h 13 m 3 /h 9 m 3 /h Air throughput at 4 Pa 56 m 3 /h 18 m 3 /h 16 m 3 /h 10 m 3 /h 18 m 3 /h 13 m 3 /h Air throughput at 5 Pa 63 m 3 /h 21 m 3 /h 18 m 3 /h 11 m 3 /h 21 m 3 /h 14 m 3 /h Air throughput at 7 Pa 76 m 3 /h 25 m 3 /h 21 m 3 /h 13 m 3 /h 25 m 3 /h 17 m 3 /h Air throughput at 8 Pa 80 m 3 /h 26 m 3 /h 23 m 3 /h 14 m 3 /h 27 m 3 /h 18 m 3 /h Air throughput at 10 Pa 90 m 3 /h 30 m 3 / h 26 m 3 /h 15 m 3 /h 30 m 3 /h 20 m 3 /h Air throughput with blower 35 m 3 /h 35 m 3 /h Internal noise LpA (in accordance with EN ISO / with 8 db room insulation) Heat recovery efficiency Optional volumetric flow limit Yes Optional additional blower Yes Optional additional air duct Yes Optional filter Manual closing Yes Yes Yes Yes Yes Yes Yes Motorised closing Available as an option Yes Heat transfer coefficient in accordance with EN ISO ,9 W/m 2 K 1,68 W/m 2 K Installation height 80 mm 100 mm Installation depth 95 mm 140 mm Ventilator length 200 mm 3000 mm 508 mm 3000 mm 600 mm 3000 mm Installation option Vertical Horizontal Vertical Horizontal Installation location Sash glazing rebate Frame glazing rebate Sash glazing rebate Frame glazing rebate CE electrical connection 230 V Electrical power consumption 17 W Surface / colour Aluminium / EV1 silver, anodized dark bronze, RAL 9016 white coated, special RAL colours upon request Aluminium / EV1 silver, anodized dark bronze, RAL 9016 white coated, special RAL colours upon request 22 Additional information With optional control rod With optional control rod **Air throughput measured with ventilator length of 1200 mm **Air throughput measured with ventilator length of 1000 mm ***Mounting frame required Switchable between ventilation and exhaust

23 AEROMAT 150 AEROMAT VT AEROMAT VT with heat recovery DD** AW4 DS** RS with heat recovery 44 db / 51 db 50 db / 57 db 46 db / 53 db 29 m 3 /h 8 m 3 /h 40 m 3 /h 11 m 3 /h 44 m 3 /h 12 m 3 /h 51 m 3 /h 13 m 3 /h 54 m 3 /h 14 m 3 /h 60 m 3 /h 16 m 3 /h 18 m 3 /h Level 1: 70 m 3 /h Level 2: 120 m 3 /h Level 1: 30 m 3 /h Level 2: 50 m 3 /h Level 1: 19 m 3 /h Level 2: 42 m 3 /h Level 1: 14 db(a) Level 2: 26 db(a) Level 1: 17 db(a) Level 2: 34 db(a) Up to 62 % Yes Yes Yes Yes G3 or F7 With separate filter compartment Extraced air: G3 Supply air: F7 Yes Yes Yes Available as an option Yes Available as an option 2,70 W/m²K 0,25 W/m²K 0,55 W/m²K 150 mm 100 mm 100 mm 190 mm 250 mm 500 mm 300 mm 500 mm 320 mm 500 mm 600 mm 3000 mm Vertical Horizontal Frame glazing rebate Mullion/transom*** 600 mm 3000 mm Longer: upon request Vertical Horizontal Sill Lintel Mullion/transom*** Reveal Floor: VT-F upon request 725 mm 3000 mm Longer: upon request 1000 mm 3000 mm Vertical Horizontal Sill Lintel Mullion/transom*** Reveal 230 V 230 V 230 V Level 1: 5 W Level 2: 32 W Level 1: 5 W Level 2: 17 W Level 1: 10 W Level 2: 21 W Aluminium/EV1 silver, anodized dark bronze, RAL 9016 white coated, special RAL colours upon request Control cord Switchable between ventilation and extraction Aluminium/RAL 9016 white coated, special RAL colours upon request Optional flap trap and window sill channel Aluminium/RAL 9016 white coated, special RAL colours upon request Optional window sill channel 23

24 Window ventilators AEROMAT mini AEROMAT midi Ventilator type With air duct with sound absorption module inside + outside Sound absorption in accordance with DIN EN R W1,9 /D n,e,w Depends on window Approx. 33 db / 40 db** Air throughput at 2 Pa approx. [m3/h] 2 * Air throughput at 4 Pa approx. [m3/h] 3 * Air throughput at 5 Pa approx. [m3/h] 3 * Air throughput at 7 Pa approx. [m3/h] 5 * Air throughput at 8 Pa approx. [m3/h] 5 * Air throughput at 10 Pa approx. [m3/h] 6 * Approx. 30** Air throughput at 20 Pa approx. [m3/h] Optional volumetric flow limit Standard Standard Impervious to driving rain when open Manual closing With optional turn lock Yes Installation height 21,3 mm Approx. 40 mm Installation depth inside 48 mm Installation depth 16,4 mm Installation depth outside Channel depth 49 mm mm Ventilator length 125 mm 417 mm Installation option Installation location Surface / colour Additional information Vertical Horizontal Frame rebate PVC / RAL 9016 white Special colours upon request for 3000 items or more Horizontal Frame Sash Frame and Sash PVC / Aluminium RAL 9016 Special RAL colours upon request The following variants are available: Without air duct: Without sound absorption module With sound absorption module inside With sound absorption module outside With sound absorption module inside and outside With air duct: Without sound absorption module Without sound absorption module With sound absorption module inside With sound absorption module outside With sound absorption module inside and outside 24 *** With installation in pairs (depending on the profile) *** Preliminary values *** Note installation Details

25 AEROMAT intense 130/10 130/20 170/10 170/15 170/20 170/25 210/10 210/15 210/20 210/25 250/10 250/15 250/20 250/25 290/10 290/15 290/20 290/25 31 db/ 38 db 27 db/ 34 db 35 db/ 42 db 32 db/ 39 db 31 db/ 38 db 29 db/ 36 db 37 db/ 44 db 35 db/ 42 db 32 db/ 39 db 31 db/ 38 db 40 db/ 47 db 37 db/ 44 db 35 db/ 42 db 33 db/ 40 db 42 db/ 49 db 38 db/ 45 db 37 db/ 44 db 33 db/ 40 db Standard self-regulating volume flow flap 650 Pa Yes 100 mm 186 mm 226 mm 266 mm 306 mm 346 mm mm Horizontal Sash glazing rebate *** Frame glazing rebate*** Concealed installation*** PVC white / grey Aluminium / EV1, RAL 9010 white coated Special RAL colours upon request Frame glazing rebate*** Concealed installation*** Control cord Bracket installation Note on ventilator types: Ventilator type 210 / 15 means: nominal depth 210 mm; vent height of the air duct 15 mm Note: The AEROMAT intense technical specifications apply per metre of ventilator length 25

26 Wall-mounted ventilators AEROPAC Ventilator type DD SN Wave Sound absorption in accordance with DIN EN /D n,e,w 50 db Air throughput at 2 Pa 11 m 3 /h Air throughput at 4 Pa 17 m 3 /h Air throughput at 5 Pa 20 m 3 /h Air throughput at 7 Pa 25 m 3 /h Air throughput at 8 Pa 26 m 3 /h Air throughput at 10 Pa 31 m 3 /h Air throughput with blower G3: m 3 /h F5: m 3 /h Activated carbon: m 3 /h Internal noise LpA (measured in accordance with DIN EN ISO 3741) (with A0 = 10 m 2 ) At 60 m 3 /h = 24 db(a) Heat recovery efficiency Type of filter Manual closing G3, F5, Activated carbon Yes Motorised closing Remote control Thermostat control Yes Z-Wave wireless network Hygrostat control Timed control Yes Yes Height Depth Width Installation location 467 mm 132 mm 270 mm Wall Sill (roof area) CE electrical connection 230 V Electrical power consumption Surface/colour Additional information PVC / alpine white, high-gloss Min. blower level = 2 W 60 m 3 /h = 5 W Max. blower level = 30 W Cable length: Max. 4.5 m long, white, with Europlug Permanent mains connection possible 26

27 AEROLIFE AEROVITAL AEROPLUS 52 db 52 db 38 db Level 1: 29 m 3 /h Level 2: 41 m 3 /h Level 3: 70 m 3 /h Level 1: 25 m 3 /h Level 4: 41 m 3 /h Level 10: 70 m 3 /h 10 m 3 /h to 30 m 3 /h Level 1: 24 db(a) Level 2: 30 db(a) Level 3: 41 db(a) Level 1: 21 db(a) Level 4: 30 db(a) Level 10: 41 db(a) 30 db (A) to 40 db (A) Up to 66 % Up to 73 % Up to 50 % Supply air: F7 Exhaust air: G3 Supply air: F7 Exhaust air: G3 Yes Yes Yes Yes G2 Optional pipe lock Yes Yes 467 mm 467 mm 350 mm 178 mm 178 mm 130 mm 490 mm 490 mm 220 mm Wall (on-wall or in-wall) Wall (on-wall or in-wall) 230 V 230 V Level 1: 10 W Level 2: 14 W Level 3: 29 W Level 1: 8 W Level 4: 14 W Level 10: 29 W Wall (on-wall or in-wall) 230 V with 12 V power supply unit with permanent mains connection optional 4 W to 7 W PVC / white, matt PVC / white, matt PVC / white, matt Cable length: 1.2 m long with Europlug Permanent mains connection possible Activated carbon filter upon request Cable length: 1.2 m long with Europlug Permanent mains connection possible Activated carbon filter upon request Cable length: 2 m long with Europlug Permanent mains connection possible Suitable for humid rooms 27

28 SIEGENIA-AUBI Ltd. Hardware and ventilation technology Richardson Way Cross Point Coventry CV2 2TA United Kingdom Phone: Telefax: SIEGENIA-AUBI worldwide: Austria Phone: Belarus Phone: Benelux Phone: China Phone: /-52/-53 France Phone: Germany Phone: Great Britain Phone: Hungary Phone: Italy Phone: Poland Phone: Russia Phone: Switzerland Phone: South Korea Phone: Turkey Phone: Ukraine Phone: Please contact your approved supplier or recognized distributor: H en/2012-7/4 Subject to technical and visual changes without notice.