CONTROLLED MECHANICAL VENTILATION

Transcription

1 PORTABLE AIR FIXED AIR UNICO SYSTEM TERMINAL UNITS HEAT PUMPS SiOS CONTROLLED MECHANICAL VENTILATION AIR COOLER 181 PELLET STOVES GAS STOVES CMV DEHUMIDIFIERS HUMIDIFIERS FAN HEATERS CERAMIC FAN HEATERS PERSONAL COMFORT

2 NEW CONTROLLED MECHANICAL VENTILATION Decentralised residential controlled mechanical ventilation system RECIRCULATION OF THE AIR MOULD PREVENTION HUMIDITY PREVENTION ENERGY SAVING CLEAN AIR WITH MAXIMUM ENERGY SAVING SILENTLY RANGE CMV DECENTRALISED SITALI DF100 PURE CMV dual cross-flow, with heat recovery for automatic exchange and purification of the air SITALI SFE100 CMV extraction only SITALI SF150 CMV flow alternated with heat recovery SITALI SF150 CMV flow alternated with heat recovery 11

3 SITALI DF100 Pure SITALI DF100 PURE Cod Dual cross-flow, de-centralised Controlled Mechanical Ventilation with heat recovery for automatic exchange and purification of the air. FEATURES Energy class: EC Brushless Motor Enthalpic cross-flow heat exchanger, composite material F7 anti-pollen filter in introduction, for purification G4 filter in extraction Control on the machine and remote control unit Filters replacement LED signal Night time/hyperventilation function remote control unit as per standard SILENT FUNCTION Only 18,6 db (A) Optimised for continuous 24/24h operation COMPACT TECHNOLOGY Compact unit with reduced clearance and consequent easy transport, installation and maintenance. FILTERS F7 AND G4 The machine is fitted with the F7 anti-pollen filter in introduction mode and G4 filter in extraction F7 ANTI-POLLEN FILTER FOR PURIFICATION OF INDOOR AIR The indoor air is filtered by the special F7 filter, which can stop fine dusts such as PM10 and PM2.5, pollens and other pollutants harmful to health. The special F7 anti-pollen filter stops up to 90% of 0.4μ particles with dimensions six times finer than PM2.5. PROTECTION FROM: MOULD POLLEN HUMIDITY FINE DUSTS 12

4 Incluso Incluso SITALI DF100 Pure Non disponibile llegamento Interno, cavi di collegamento mm 785 x 320 x 135 mm TECHNICAL DATA Product code Hole diameter mm 100 Energy class Prezzo 667,00 A Flow rate adjustment 4 speed Air flow rate m3/h 31/22/17/10 699,00 Sound pressure db(a) 36,6/29,7/23,8/18,6 899,00 Sound power (according to UNI 3744:2010) 44,6/37,7/31,8/26,6 1349,00 Max. thermal % Filters (introduction/extraction) 15, ,00 i di trasporto. Prezzi in euro IVA esclusa. 1 SITALI DF100 Pure heat exchanger F7 / G4 Enthalpic cross-flow Power supply voltage 24V Absorbed current 0,68 A Input power W 16,5/9/6,5/4,6 Mq treated 25m² Weight 6,5 Kg Kit optional Ø100 mm EXTERNAL GRIDS Sitali DF100 Pure is supplied with a standard Ø100 mm ducting kit, for easy and quick installation, with flexible vents that can be installed from inside the building. 2 Control on the machine Remote control unit Code B Sitali DF100 Pure, F7 and G4 filters kit Kit for replacing F7 and G4 filters (present as per standard in the machine) OPERATING LAYOUT The stale air coming from closed rooms is expelled outdoors. The fresh air enters from outdoors and passes through the special F7 filter, where it is purified from smog, dusts, pollens and pollutants present in the outdoor air. The heat exchanger heats the clean air entering, recovering up to 86% of the heat contained in the stale air heated by the plants. The stale air, full of humidity and CO2, is withdrawn from the indoor environment and made to flow through the heat exchanger, where it transfers its heat to the fresh air entering. 13

5 SITALI SFE 100 SITALI SFE 100 Cod Continuous single flow decentralised Controlled Mechanical Ventilation FEATURES Top quality ABS structure High-efficiency aerodynamic fan EC brushless motor with thermal protection integrated humidity sensor Elegant deign with minimalist lines Front cover; easy to remove for cleaning, without the use of tools Aerodynamic deflectors Very low energy consumption 4 ventilation speeds available SILENT FUNCTION The most silent: only 11 db (A) Optimised for continuous 24/24h operation. VENTILATION Decentralised CMV unit with continuous single flow, Ø100 mm, with very low energy consumption, for replacing stale air in the humid environments with maximum acoustic comfort. Ideal for preventing problems of condensate and mould, which inevitably damage the structure and compromise the health of the occupants. HUMIDITY DETECTION The unit is fitted with a humidity detection sensor, adjustable from 50% to 95% R.H. and a timer; this can be adjusted from 0 to approx. 30 minutes. The unit operates continuously at the minimum speed selected, which increases automatically to the average speed when the R.H. percentage exceeds the threshold set. 164 ø C TECHNICAL DATA SFE 100 Product code Hole diameter mm 100 Flow rate m 3 /h 83 / 47 / 29 / 21 Consumption W 2,5 / 1,7 / 1,2 / 1 Sound pressure db(a)* 26 / 23 / 13 / 11 Environment temperature C max 50 IP protection rating IPX4 Weight kg 0, V ~ 50-60Hz aeraulic performance measured according to ISO 5801 at 230V 50Hz, density of the air 1.2 Kg/m3 - data measured in accredited TÜV Rheinland laboratory * sound pressure level at 3m in free field 184

6 SITALI SF 150 Alternate single flow decentralised Controlled Mechanical Ventilation with heat recovery FEATURES SITALI SF 150 Cod Temperature probe that adjusts the air flow inversion times to maintain the indoor comfort level Energy class: EC brushless motor Integrated humidity sensor Easy maintenance, indoor magnetic release Infra-red remote control with LCD Double filter on the inner/outer side of the exchanger Multicolour LED indicator 5 ventilation speeds available Magnetic wall support for remote control PORTABLE AIR UNICO SYSTEM TERMINAL UNITS HEAT PUMPS SiOS FIXED AIR SILENT FUNCTION The most silent: only 10 -db (A) Optimised for continuous 24/24h operation. INTELLIGENT FUNCTION Thanks to the presence of the temperature detection probe, the air flow inversion time is self-adjusted to allow the best comfort indoors. MAGNETIC FUNCTION Quick release via magnets for easy maintenance without the need for specialised staff. AIR COOLER Telescopic pipe adaptable to the thickness of the wall External grid , Anti-dust filter, easy to remove and washable Regenerative heat exchanger with washable ceramic pack Magnetic release to facilitate maintenance operations Ventilating unit Front cover in top quality ABS Method Filter reset Comfort/efficiency key Filter reset key Flow direction TWO METHODS Comfort: best acoustic comfort for use during the night Efficency: best efficiency at maximum power Ventilation speed Timer Ventilation speed key Flow direction key Boost key TECHNICAL DATA SF 150 Product code Hole diameter mm 150 Energy class A Flow rate aria m 3 /h 60 / 50 / 40 / 30 / 20 Sound pressure db(a)* 29 / 24 / 20 / 14 / 10 Consumption W 6 / 4,5 / 3,5 / 2,5 / 2 Termal efficency max 82% Environment temperature C max -20 C +50 C IP protection rating IPX4 Weight kg 5, V ~ 50-60Hz aeraulic performance measured according to ISO 5801 at 230V 50Hz, density of the air 1.2 Kg/m3 - data measured in accredited TÜV Rheinland laboratory * sound pressure level at 3m in free field 185 PELLET STOVES GAS STOVES CMV DEHUMIDIFIERS HUMIDIFIERS FAN HEATERS CERAMIC FAN HEATERS PERSONAL COMFORT