Heat Recovery ventilation Dee Fly Cube 550 Field of application Description Advantages Range Technical details Installation Remote controls Servicing

Transcription

1 Field of application Description Advantages Range Technical details Installation Remote controls Servicing

2 Remote control ErP * ** Conpliance compliance. ErP ready. Advantages Reversible connections. Ventilation control via Interior Air quality sensors (CO 2 ). Colour touch screen remote control. High-efficiency heat exchanger > 90 %. Energy-efficient motor. FIELD OF APPLICATION General and uninterrupted ventilation of dwellings. Heat recovery system. DESCRIPTION Remote control + Heat Recovery ventilation. Operating at: - Constant speed (Cube 550 and Cube 550+), - Optional constant airflow or pressure on the Cube Airflow from 120 m 3 /h to 585 m 3 /h. Filters (as per class EN 779): - F7 filter on new air (optional F9 filter), - G4 filter on exhaust air. By-pass 100% as standard. High-efficiency heat exchanger > 90%. 3 speeds + Stop (version 550). Air duct connections: Ø 150 mm (adapters Ø 160 mm included) Sound pressure: at 4 meters, 47 db(a) at 585 m 3 /h. Controlled via: - Cube 550 wired control, - Cube 550+ touch-screen wired unit (see dedicated page). New air or exhaust air: -5 C/+40 C. Frost protection by balancing airflows. Pre-heated air (in option). 2-year warranty. RANGE Description + - constant speed control X X Wall attachment bracket X X 4 spigots X X Water trap X X Remote control X - Remote control touch-screen Dee Fly Cube X By-pass X X CONNECTED accessories Constant airflow adapter kit - X Constant pressure adapter kit - X Pre-heating coil - X CO 2 Sensor - X F9 filter on new air - X INSTALLATION Vertical attachment to wall. Condensate discharge for connection to Ø 32 PVC network (water trap supplied with kit). Humidity-controlled and Self-balanced air supply and exhaust terminal kits. RANGE Description Code Energy efficiency B A * In accordance with eco design 1253/2014 and energy labelling 1254/2014 regulations. ** Class obtained according to Labeling 1254/2014 in Local Demand Control. 2

3 DESCRIPTION ACCESSORIES Water trap Standard connection to the and to the drains network for condensate removal. Dimensions: See page of dimensions. Replacement filters For annual servicing. Dimensions: - G4: 177 x 440 x 25 mm, - F7: 177 x 440 x 25 mm. RANGE ACCESSORIES Description Code Filters (1xG4 + 1xF7) ADDITIONNAL OFFER TO DEE FLY CUBE 550+ Pre-heating coil Dimensions: 160 x 162 x 250 mm. Heat exchanger frost protection Ø 32 mm. Used to heat incoming air. Constant pressure kit Dimensions: 150 x 235 x 110 mm. Additional instructions supplied with product. Constant airflow kit Dimensions: 150 x 235 x 110 mm. Additional instructions supplied with product. CO 2 Sensor Dimensions: 85 x 100 x 26 mm. Used to measure CO 2 level. F9 filter Dimensions: 177 x 440 x 25 mm. Fine particle filter. RANGE ACCESSORIES DEE FLY CUBE 550+ Description Code Constant pressure kit Constant airflow kit Filter F CO 2 Sensor Pre-heating coil ACCESSORIES Water trap G4 filter Filters F7 / F9 Pre-heating coil Constant pressure kit / constant airflow CO 2 Sensor 3

4 Technical details DIMENSIONS (mm) Weight: 45 kg. Pre-heating coil Ø Ø Ø Water trap Constant airflow kit 288,5 112,7 112,7 112,7 112,7 358,2 140,2 5,5 112, ,9 103,9 331,8 Ø ,5 358,2 140,2 5,5 112, ,9 103,9 331, F7, G4, F9 Filter CO 2 Sensor Constant pressure kit

5 Technical specifications ELECTRICAL SPECIFICATIONS Power supply: 230 V - 50 Hz single-phase. Maximum current: 2.5 A max. Class : IP 54. AVERAGE POWER CONSUMPTION Airflow (m 3 /h) Pressure (Pa) Power consumption (W) AIRFLOW SPECIFICATIONS Constant speed Constant pressure Speed 1 Speed 2 Speed Speed 1 Speed 2 Speed Speed 1 Speed 2 Speed 3 W W Speed 1 Speed 2 Speed Constant airflow Speed maxi. Spedd mini. Envelope curve Test conditions at nominal airflow. Outside air = -5 C, Hr 80 %. Ambient interior temperature = 20 C, Hr 50 % ACOUSTIC SPECIFICATIONS Test conditions: (UNI EN ISO 3747). Outdoor air = dry air at -5 C, Hr 80%. Indoor air = dry air at 20 C, Hr 50%. At maximum airflow : 585m 3 /h. Dee Fly Sound power level in duct (Lw) Cube 550 (Hz) db(a) db(a) Case breakout noise at 4m (Lp) (Hz) db(a) db(a)

6 INSTALLATION The can be fixed to the wall vertically. Attachment bracket supplied with the. The must be installed in an insulated, frost-protected location. Minimum width of maintenance hatch on front panel (500 mm). Attachment of slide Recess for opening front panel Air duct connections: 4 x Ø 150 mm branch connections (adapters Ø 160 mm included) + 4 sealed collars and 2 plugs. Reversible connections: 4 branch connections on top or 2 on top / 2 on bottom. Supply air (indoor) Expulsion air (outdoor) Exhaust air (indoor) Fresh air (outdoor) Connection of condensate discharge - Condensate discharge for connection to waste water network. - Water trap supplied in kit. 6

7 INSTALLATION The constant airflow or pressure kit features a ring to be positioned on air ducts; the pressurised air intakes must always be oriented downwards to prevent the introduction of dust or foreign bodies into the system, as they could cause it to malfunction. CONSTANT PRESSURE The kit should be fitted on the exhaust air side (A) of the supply fan unit to detect the pressure downstream. Example of assembly of constant pressure kit A CONSTANT AIRFLOW The kit should be fitted on the exhaust air side (A) upstream of the fan unit to detect the differential pressure without risking the falsification of measurements by turbulence. If two kits are required, the other should be fitted on the fresh air side (B). Example of assembly of constant airflow kit B A Supply air (indoor) Expulsion air (outdoor) Exhaust air (indoor) Fresh air (outdoor) Supply air (indoor) Expulsion air (outdoor) Exhaust air (indoor) Fresh air (outdoor) Positioning of pre-heating coil Connection of pre-heating coil The pre-heating coil must be attached horizontally. Supply air (indoor) Expulsion air (outdoor) Exhaust air (indoor) Fresh air (outdoor) Electrical connections: Minimum cable cross-section: 3 x 1.5 mm 2. Power supply: 230 V single-phase. 7

8 SERVICING Filter access (air supply and exhaust) Filters replacement: Variable according to pollution of ambient air (dust, smoke). Recommended every 6 months. Before changing the filters, turn the switch to position 0. G4 filter (top) F7 filter (bottom) 4 5 Description Code Filters (1xG4 + 1xF7) Removing the maintenance panel

9 SERVICING Access and cleaning the heat exchanger Precautions to take when handling the exchanger. Recommended maintenance period for heat exchanger: approx. 12 months of operation

10 REMOTE CONTROL DEE FLY CUBE speed controller (30% - 65% - 100%). Fan malfunction alarm. Filter clogging alarm. By-pass. Dimensions : 90 x 90 x 60 mm. REMOTE CONTROL DEE FLY CUBE 550+ Configurable ventilation speed. Touch screen. Boost function. Fan malfunction alarm. Filter clogging alarm. By-pass. Hourly and daily timer programming. ModBus communication. Dimensions : 120 x 80 x 25 mm. 10

11 SUMMARY OF REMOTE CONTROL FEATURES REMOTE CONTROLS CUBE 550 CUBE 550+ DESCRIPTION OF CONTROLS VENTILATION COMFORT ALARMS COMMUNICATION Fan speed AVAILABILITY Choice of speed control: OFF V1 V2 V3 X X Choice of operating range - X Automatic control of airflow by CO2 sensor Automatic control of fan speed by external 0-10 V signal - X Remote ON / OFF contact - X Boost function Boost at set times - X Boost configure by user - X Boost by external contact, modifiable after activation - X Boost by occupancy sensor - X Time range Bypass Weekly programming - X Automatic bypass control X X Frost protection Alarms Reduction of air supply fan speed down to zero. Increase of exhaust fan airflow up to maximum. Control of electric pre-heating coil - X LED alarm / fault display X - Flowchart alarm / fault display Remote display of unit operational status via remote contact: closed contact = unit ON / contact open = unit OFF Communication X X X X - X Possibility of assigning master / slave - X Possibility of changing display language: - English - Italian - French - German - Dutch - Spain - X ModBus communication - X 11

12 Ventilation Double Flux Principle Heat recovery ventilation offers general and uninterrupted ventilation, recovering the heat from exhaust air to pre-heat the influx of fresh air. This type of ventilation filters incoming air and ensures clean air inside the dwelling. Using the heat exchanger, new air is pre-heated to limit the need for indoor heating. The unit can be easily installed in a cellar or equipment room. Avantages Reversible connections. Ventilation control via Interior Air quality sensors (CO2). Colour touch screen remote control. High-efficiency heat exchanger > 90 %. Energy-efficient motor. ALDES AÉRAULIQUE - Headquaters: Tel : Fax: ALDES INTERNATIONAL - Tel: Fax: Dee_fly_cube_550_Tech_Corp_Gb_1-06/ Aldes - Aldes reserves the right to make changes to its products due to technical developments. - RCS Lyon