2008/9 Ventilation solutions for domestic, commercial and light industrial applications

Transcription

1 Uniclass L7534 EPIC L32 Cl/SfB (57) 2008/9 Ventilation solutions for domestic, commercial and light industrial applications

2 Xpelair Always the Freshest Solutions For over fifty years, Xpelair has been designing and manufacturing ventilation solutions for domestic, commercial and industrial applications. 2

3 Over 50 years Xpelair has earned an enviable reputation in world-class domestic, commercial and industrial ventilation leading the way with innovative technologies and style to ensure the air we breath is clean, fresh and healthy. Xpelair products are specified and distributed in over 80 countries, their ease of installation and reliability gaining many international Government contracts and firmly retaining their position as the specifier's choice. Today, the Xpelair range addresses the issues of safety in the home, air tight buildings, energy efficiency, passive smoking and the need to remove carbon emissions with intelligent products to meet specific needs. The range anticipates forthcoming building regulations, environmental legislation and changing construction methods. Xpelair's dedicated specification team is ready to provide field applications advice and work with installation providers to ensure fast and hassle-free installation. If you prefer, a design service is also available to provide a specification from your plans. All our product information is available on-line. Advice is only a phone call away. Sustainable building solutions from Xpelair. Tel: Xpelair presents CarbonLite: Working to lighten the impact on our planet s resources. As part of Applied Energy, Xpelair takes a responsible approach to the design, manufacture, packaging and specification of its products, actively seeking ways to improve with the environment in mind. In this year s catalogue you will find many products bearing the CarbonLite symbol indicating our use of UltraDC and UltraEC technology, significantly lowering energy use and extending motor life to beneficially reduce whole life costs. XRA and XMV roof cowls are now 100% recyclable. You will find products from our Xcell and Xplus ranges are now Appendix Q Best Practice listed for inclusion in SAP calculations. Ventilation is essential to health and the protection of the fabric of a building but over-ventilating can lose valuable heat. Choose from our domestic products providing the installed ventilation requirements of Building Regulations Part F1. And consider our range of energy saving auto-controls designed to respond to the changing indoor air quality without the need for occupant intervention. With over 90% of our product assembly still in the UK Xpelair is proud of its record in minimising transport pollution. And we have removed all EPS from our packaging which is bio-degradable. Lightening the weight of CO 2 emissions in manufacture and the home is everybody s responsibility. The CarbonLite initiative is our small contribution. 3 Xpelair Always the Freshest Solutions

4 Product Contents Bathroom and Shower Rooms NEW NEW DX200/ LVCF20T DC CF20/40T Profile DX180 LVDX200 LVCF20 DX100 XX100 CF20 (UltraDC) (UltraCV) 29/25M Page Number Fan Type Centrifugal Centrifugal Centrifugal Centrifugal Centrifugal Centrifugal Flat Ducting Axial Axial NEW LV100 SL100 CentrX XIL XXS BriteX BriteX Turbo XIM Page Number Fan Type Axial Axial Centrifugal Axial Axial Axial Mixed Flow Mixed Flow Kitchens NEW NEW NEW NEW SL150 GX6 GX6/ GXC6 GX6 EC2 GXC9 DX400/ CF20/40T CF40 (UltraCV) Canopies Profile 60 CX10 CMF Page Number Fan Type Axial Axial Axial Axial Centrifugal Centrifugal Centrifugal Flat ducting Axial Centrifugal For Domestic Sensors, Switches & Accessories see pages

5 Home Systems NEW NEW Xplus Xplus 250 & 400 Xcell Profile 150 System X EverDri XHR150 AutoFlow Page Number Type Mechanical Mechanical Mechanical System ducting Ducting system Positive Input Mechanical Passive Extract Extract Ventilation Ventilation (PIV) Ventilation Air-input Ventilation (MEV) Ventilation (MEV) and Heat and Heat Recovery (MVHR) Recovery (MVHR) Commercial Ventilation GX PX RX WX WXXL ChefX Page Number Fan Type Axial Axial Axial Axial Axial Kitchen Canopies For Commercial Sensors, Switches & Accessories see pages Heating and Air Treatment Screen Digitemp WH & WHP DCH PlinthHeat Heat Whispair Electrostatic Air Cleaners DigiPure Page Number Type Air Fan heater Fan heater Plinth Over door Circulation Air cleaner Air cleaner conditioner heater heater fan Industrial Ventilation Scimitar XPMS Scimitar XSCS Rapier XPMA Rapier XSCA Rapier XRA XMV XID Page Number Fan type Plate mounted Short case Plate mounted Short case Roof fan Mixed flow Metal inline axial axial axial axial & cowl roof XIDP NEW Xpress Page Number Fan type Plastic inline Mixed flow Compact Attenuated Versatile Attenuated Air circulation inline inline inline attenuated inline Inline For Industrial Controllers & Accessories see pages MinimX C LoSound C CubeX C HiFlo CMAX NEW ManCoolers 5 Product Contents

6 Domestic Ventilation Home Comfort Home comfort has come a long way in the last two decades. The design and construction methods of domestic buildings have changed radically. Room sizes and room heights have generally decreased and the envelope of the building is better sealed and insulated. Add a new generation of furnishing and flooring materials, security and our changing lifestyles and we find that our homes are sealed up for prolonged periods unable to breathe naturally like previous generations of leaky homes. We are cosier and more energy efficient, which is good for our pockets as well as the environment. But an average family produces about two gallons of water vapour a day from breathing, washing, cooking in addition to a build up of odours. Indoor pollution is not just bad for the building fabric, it can affect our health too. Bronchial conditions can be triggered by the house dust mite that thrives in warm moist conditions. Building Regulations The Building Regulations Part F1 is a legal requirement requiring adequate ventilation in buildings intended to be capable of restricting the accumulation of such moisture, which could lead to mould growth and pollutants originating from within the building as would become a hazard to the health of people in the building. The Building Regulations 2006 Edition recognises the importance of ventilation in buildings, requiring ventilation for kitchens, utility rooms, bath/shower rooms, combined bathroom/toilets and commercial applications. Intermittent Ventilation Requirements New build The minimum domestic mechanical ventilation requirements are*: Kitchens 60 l/s (30 l/s with a cooker hood) Utility rooms 30 l/s Bath/shower rooms 15 l/s Separate toilets 6 l/s In addition, rooms without windows must have an overrun timer of at least 15 minutes * assumes that fans are running only when rooms are in use. Refurbishment Older properties present a different challenge. With generally larger rooms, higher ceilings but poorer insulation, the effects of condensation are often more obvious. Here, a better method of selecting a fan is based on the volume of the room multiplied by the following air change rates. Domestic kitchens ach Bathrooms 6-10 ach Shower rooms ach Toilets 6-10 ach Utility rooms ach Example: An older style kitchen 2.5m by 4m with a ceiling height of 3m will have a volume of: 2.5x4x3 = 30 cubic metres. Air change rate is x15 = 450 m 3 /h 30x20 = 600 m 3 /h Here a GXC9 with an extract performance of 549m 3 /h would be appropriate. Correct siting The extract point should always be sited to capture water vapour and odours at source. It should be located as high as possible and provide a flow across the room with air replacement usually coming from the doorway. If there is a negligible gap beneath the door when closed, fit a slimline door grille at low level for air replacement and effective fan operation. If there is a fuel burning appliance in the room, ensure that there is adequate air replacement for both the fuel burning appliance and the fan. Finding the right position can often be a compromise. In an upstairs bathroom, options will include a ceiling mounted fan with ductwork running to a soffit grille or fan and light such as Xpelair BriteX. Axial or Centrifugal? So, we know the volume of air to be extracted per hour and if it is wall, window or ceiling fitting. Axial fans such as Xpelair DX100 are most appropriate for extraction directly to the outside through a wall or window. However, if the window or wall faces a prevailing wind such as in coastal areas, exposed hills or high rise applications, a centrifugal fan which has a higher pressure performance is more suited to overcome these outside conditions. Centrifugal fans are ideal for flexible ducted applications or smooth bore ducting for longer distances. Choose an Xpelair Premier DX200T model with timer for internal toilets, bathrooms and washrooms with no direct access to the outside to meet Part F1 requirements. 6

7 Where do I need a fan with humidity control? Automatic humidity control is there for your convenience and to protect you and your home from unhealthy levels of condensation, particularly when the users of the room can not always be relied upon to switch On the fan. Auto controls save energy by only switching the fan On when necessary. All Xpelair domestic condensation control fans are supplied with built-in humidistats. If the fan cannot be located near the source of humidity, then a separate remote humidistat is available. SELV (Safety Extra Low Voltage) fans Bathrooms and showers are areas of increased electrical hazard as defined by the IEE Wiring Regulations (16th Edition) BS 7671: 2001 What does it all mean? When fitting ventilation products in Zones 1 and 2, a water ingress protection rating of IPX4 or higher is required for the installed product. It is essential that the electrician also maintains IPX4 integrity at the cable entry. Most Xpelair DX100 and Premier products are tested to IPX5 which exceeds this. For complete peace of mind a range of Xpelair DX100 SELV and Premier SELV fans fulfil the requirements of IPX5. They operate on a 12V system with a SELV transformer located outside Zone 2. The illustrations in the Bathroom Zoning section show the zones in which fans of differing IP rating can be installed. Continuous Wholehouse Ventilation In many new build situations, architects are choosing ducted whole-dwelling systems such as Xpelair s Xplus central extract range. Approved by Building Regulations Part F1, this continuously extracts from several rooms where moisture may be generated throughout the day and night, at a low air change rate, with a boost speed triggered automatically by a sensor or operated manually. These require only one opening to the outside which is important where sound issues and external visual impact are relevant. Alternatively Premier Ultra DC units can be used to provide a decentralised wholehouse extract system with heat recovery. Wholehouse Ventilation In tight, well insulated, new dwellings, Mechanical Ventilation with Heat Recovery like the Xpelair Xcell range is increasingly being used as a state of the art solution. MVHR combines wholehouse ventilation based air changes rates given in Part F1 tables 1.1a and 1.1b with a high efficiency heat recovery cell. The unit simultaneously extracts air from the wet areas: kitchen, utility rooms, bathrooms and toilets, which passes through the cell in one direction warming incoming filtered air from outside, which is then distributed to other parts of the home. The heat recovery rate is exceptional (typically 90%) and UltraDC motors ensure very low running costs. The Appendix Q website lists MVHR and MEV units listed meet the Best Practice as defined by GPG 268 published by the Energy Saving Trust. So whatever the season the result is a comfortable but well aired home that always feels fresh. 7 Domestic Ventilation

8 Bathroom Zoning Bath/shower rooms are areas of increased electrical hazard. When fitting ventilation products in Zones 1 and 2 of a bath/shower room, an ingress protection rating of at least IPX4 is required, in accordance with the requirements of the IEE Wiring Regulations (16th Edition) BS 7671:2001. The following guide will assist specifiers and installers with the selection and positioning of suitable electrical products in this area. If in doubt consult the standard. Extract from BS7671: Classification of Zones These requirements are based on the dimensions of four zones: Zone 0, Zone 1, Zone 2 and Zone 3. The zones are determined taking account of walls, doors, fixed partitions, ceilings and floors, where these effectively limit the extent of a zone. Figures 601A and 601B are examples of the zones. Zone 1 - is limited by: 1. The upper plane of Zone 0 and the horizontal place 2.25m above the floor, and 2a.By the vertical plane(s) circumscribing the bath tub or shower basin and includes the space below the bath tub or shower basin where that space is accessible without the use of a tool, or 2b.For a shower without a basin and with a demountable shower head able to move around in use, the vertical plane(s) at a radius of 1.2m from the water outlet at the wall, or 2c.For a shower without a basin and with a shower head which is not demountable, the vertical plane(s) at a radius 0.60m from the shower head. Note: Electrical appliances should be either IPX4 rated or Safety Extra Low Voltage. Zone 3 - is limited by: 1. The vertical plane(s) external to Zone 2 and parallel vertical plane(s) 2.4m external to Zone 2, and 2. The floor and the horizontal plane 2.25m above the floor. In addition, where the ceiling height exceeds 2.25m above the floor, the space above Zone 2 up to the ceiling or a height or 3.0m above the floor whichever is lower, is Zone 3. Zone 0 - is the interior of the bath tub or shower basin. In a location containing a shower without a basin, Zone 0 is limited by the floor and by the plane 0.05m above the floor. In this case: 1. Where the shower head is demountable and able to be moved around in use Zone 0 is limited by the vertical plane(s) at a radius of 1.2m horizontally from the water outlet at the wall, or: 2. Where the shower head is not demountable, Zone 0 is limited by the vertical plane(s) at a radius of 0.60m from the shower head. Note: Electrical appliances will require an Ingress Protection IPX7 rating, which means the product must be capable of temporary immersion in water. Zone 2 - is limited by: 1. The vertical plane(s) external to zone 1 and parallel vertical plane(s) 0.60m external to Zone 1, and 2. The floor and the horizontal plane 2.25m above the floor. In addition, where the ceiling height exceeds 2.25m above the floor, the space above zone 1 up to the ceiling or a height of 3.0m above the floor whichever is lower, is Zone 2 Note: Most electrical installations fall within this Zone. Electrical appliances should be either IPX4 rated or Safety Extra Low Voltage. 8

9 Typical Examples of Zoning Bath only Shower with Tray Shower without Tray (with permanently fixed partition - fixed water outlet not demountable) Shower without Tray (with permanently fixed partition - water outlet demountable) 9 Bathroom and shower room fans for wall, window and ceiling installations

10 Bathroom and Shower Rooms Fans for wall, window and ceiling installations More moisture is produced in bathrooms than anywhere else in your home. Bathrooms and shower rooms are relatively cool areas. Moisture from hot water when showering, bathing and washing is quickly absorbed into the air, which warms rapidly increasing further its capacity to hold water vapour. The hard surfaces of the bathroom tiling, mirrors, painted surfaces and windows change temperature far more slowly and, being cooler than the air, form water droplets seen as misted up mirrors and windows. This warm wet air quickly migrates to adjacent rooms condensing on cooler unventilated surfaces such as the back of wardrobes and increasing the humidity level throughout the house. Matters can be aggravated if the room is also used for drying clothes. Today, condensation problems like these are more commonplace as we shower more and place greater emphasis on air tightness in our homes. Toilets present a different problem. Unchecked, odours are unpleasant and embarrassing. The solution is to extract moisture and odours at source. In bathrooms and toilets the most effective position is diagonally opposite the door allowing a gentle flow of air across the room. In showers, it is often best positioned directly over the shower cubicle. Which solution is best for me? IEE electrical regulations define bathrooms as areas of increased electrical hazard. The illustrations in the Bathroom Zoning section show the zones in which fans of differing IP rating can be installed. As a rule, look out for IPX4 or higher. For complete peace of mind Xpelair LoVolt models are available which have a separate Safety Extra Low Voltage transformer fitted outside of the splash area and operate the fan at 12Vac. For installations that fall within the scope of Building Regulations the extract requirements are 15 l/s for bathroom and shower rooms, and 6 l/s for toilets. If the room does not have an opening window then a fan with a built in timer should be selected. This will continue to run for at least 15 minutes after the room has been vacated. For other rooms where moisture generation is high a humidity sensor controlled fan would be recommended. Axial fans are suitable for through the wall or window fitting in most homes. For high-rise and exposed (e.g. coastal) locations, centrifugal fans will cope better with gusty conditions. Centrifugal and mixed flow units have a better pressure characteristic, which makes them more suitable where a ducted solution is required. For showers, Xpelair offers kits for simple above ceiling extract ventilation through a soffit. Air replacement is particularly important in these rooms as the doors are shut when occupied. A fan can only function if there is an equal flow of air to that being extracted. This can be achieved by maintaining a small gap beneath the door and the floor covering or by fitting a slim air replacement grille to the door. 10

11 Bathroom and Shower Rooms DX200/ LVDX200/ LVCF20T DC CF20/40T Profile DX180 CF20 LVCF20 29/25M DX100 XX100 (UltraDC) (UltraCV) Page Number Fan Type Centrifugal Centrifugal Centrifugal Centrifugal Centrifugal Flat Ducting Axial Axial Voltage 230V 230V 230V Ultra DC Ultra DC n/a 230V 230V Positioning Wall / Window Wall / Window Wall / Window Wall / Window Wall / Window n/a Wall / Window Wall / Window Max extract rate (m 3 /h) n/a IP rating IPX4 IPX5 IPX5 IPX5 IPX5 n/a IPX5 IPX5 Fan only or kit Fan Fan Fan Fan Fan n/a Kit Fan Fan only or kit Fan Fan Fan Fan Fan n/a Kit Fan Carbonlite LV100 NEW SL100 CentrX XIL XXS BriteX BriteX Turbo XIM Page Number Fan Type Axial Axial Centrifugal Axial Axial Axial Mixed Flow Mixed Flow Voltage LoVolt 230V 230V 230V 230V LoVolt LoVolt 230V Positioning Wall / Window Wall / Window Wall Inline Inline Inline Inline Inline Max extract rate (m 3 /h) IP rating IPX5 IPX4 IPX4 IPX2 IPX2 IPX4 IPX4 IPX2/4 Fan only or kit Kit Fan Fan Kit Fan Kit Kit Fan NEW NEW 11 Bathroom and shower room fans for wall, window and ceiling installations

12 Xpelair Premier DX180, DX200 & CF20 Centrifugal extract and condensation control fans DX180 DX200 CF20 Key features Application: Control options: Legislation: Hole diameter: Suitable for surface, flush wall and ceiling mounting. Window kit available Pullcord, timer and humidistat Conforms to Building Regulations Part F1 117mm (wall/ceiling) 120mm (window) Select the right product for your application The Range The efficient and stylish Premier range of pressure developing fans is designed specifically for domestic applications, including bathrooms, shower rooms, toilets and utility rooms where longer duct runs are required. They are also suitable for commercial applications such as hotel rooms, office toilets, commercial bathrooms and for coastal installations. All models have a gloss white casing with clean and sleek appearance. A two part casing means Premier fans can easily be recessed or surface mounted. They can be fitted into ceilings or stud work walls in recesses as little as 50mm deep using the side entry knockout provided, an FDA adaptor and Profile 29 flat duct. Alternatively 100mm circular ducting can be used. All feature an automatic air operated back draught shutter and the CF20 range are supplied with a brown 100mm external outlet grille for wall or soffit fixing. The clip off front cover and removable fan blade on all models allow easy cleaning and maintenance. All also have a neon indicator (except DX180/T). DX200 and CF20 models are IPX5 rated where-as the DX180 models are IPX4. All are BEAB approved. They are all suitable for V AC 50Hz mains operation. Motors are totally enclosed and maintenance free for life, with self aligning bearings and a thermal cut-out. All electronics and wiring terminals are fully protected. Optional filter is available. See page 57. DX180 DX180T DX180H DX200 DX200T CF20 CF20T Reference number 91181AW 91182AW 91183AW 91013AW 91014AW 91015AW 91016AW Remote switch (supplied separately) Integral pullcord Integral adjustable run-on timer (30s to 20 mins) Integral fixed run-on timer (20 mins) Humidity sensor (50-90% RH) Quick visit facility (2 minutes) Speeds Trickle ventilation facility Extract performance (FID, m 3 /h) boost speed speed speed trickle Extract performance (FID, l/s) boost speed speed speed trickle Sound pressure level (db(a)@3m) boost speed speed speed trickle Max. electrical power rating (W) IP rating IPX4 IPX4 IPX4 IPX5 IPX5 IPX5 IPX5 Weight (kg) Guarantee (years, UK)

13 Models Premier DX180 Ref AW Single speed centrifugal unit Operated by remote switch or sensor Premier DX180T Ref AW Single speed centrifugal unit with timer Built-in fixed 20mins run On period after the light has been switched Off Premier DX180H Ref AW Single speed centrifugal unit with humidistat On/Off humidistat adjustable 50-90% RH Premier DX200 Ref AW High performance centrifugal unit Choice of 2 set speeds Premier DX200T Ref AW High performance centrifugal unit with timer Room size selector matches extract performance for improved efficiency Performance DX180 Range Dimensions (mm) Premier DX180 Installation and Accessories Wall Mounting Hole diameter: mm Installation Accessories Wall vent kit VK10 Termination ducting kit WT Wall tube WD100 Easy fit kit EFT Flush Wall Mounting Ref AW Ref AA Ref AA Ref AA QuickVisit delay feature prevents fan from running should light be switched On/Off again within 2mins Mechanical trickle ventilation facility Built-in run-on period after light switched Off. User adjustable from 30s-20mins Premier CF20 Ref AW High performance condensation control centrifugal unit Step-speed, user adjustable humidistat Room size selector matches extract performance for improved efficiency Tricklevent and Pullcord manual override Includes external wall grille Premier CF20T Ref AW All the features of CF20 plus: Auto run-on after light switched Off QuickVisit delay feature prevents fan from running should light be switched On/Off again within 2 mins DX200 Range Premier DX200 Ceiling Mounting with flat ducting Hole diameter: Installation Accessories Flush Ceiling Mounted Controllers Manual Override Switch MOS Ref AW Switch 1 controls the high/low speed levels and Switch 2 controls On/Off and the tricklevent option Remote Humidistat XRH Ref AW Stand alone humidistat switches fan On/Off when RH reaches pre-set levels. Complete with pullcord override switch Remote Time Delay Unit DT20B Ref AW User adjustable run-on timer (2-20mins) Passive Infrared Sensor XPIRA Ref AA Activates fan via body movement. Ideal for infrequently used public spaces. Built in timer to prevent nuisance tripping Typical Specifications on page 160. Wiring Diagrams on page 180. Remote Sensors on page 56. DX200T/CF20 Surface Ceiling Mounted 117mm or (w233 x h203mm flush mounted) Flat ducting XFP see Profile 29 Flexible ducting FD100 Ref AA Condensation trap XCT100 Ref AA Vent cowl VC10 Ref AA Flat duct adaptor FDA Ref AA Ceiling mounting adaptor XCMK Ref AA Premier CF20 Window Mounting Hole diameter: 120mm Installation Accessories Glass mounting kit GMK Ref AA 13 Xpelair Premier DX180, DX200 & CF20 Centrifugal extract and condensation control fans

14 Xpelair Premier LoVolt LVDX200 & LVCF20 Safety Extra Low Voltage ventilation LVDX200 LVCF20 Key features The Range Application: Control options: Legislation: Hole diameter: Domestic bathrooms, shower rooms, toilets and utility rooms Pullcord, timer & humidistat Conforms to Building Regulations Part F1 117mm (wall/ceiling) 120mm (window) Select the right product for your application Splash about with complete peace of mind. The Safety Extra Low Voltage (SELV) versions of the Premier DX200 and CF20 pressure developing centrifugal fans are ideal for use in shower rooms, bathrooms with showers and other zone 1 and zone 2 wet areas. The SELV system consists of a 12V fan unit which can be safely installed in the spray area of a bath or shower, with the transformer located outside the spray area. Premier models LVDX200 & LVCF20 conform to Building Regulations covering mechanical ventilation for toilets, bathrooms and utility rooms. Importantly they exceed the IP requirements for zone 1 and zone 2 as defined by IEE Wiring Regulations (16th Edition) BS 7671:2001, and are rated IPX5. The motor is totally enclosed and fitted with self aligning bearings and thermal overload protection. The motor insulation is Class B making them suitable for ambient temperatures up to 40ºC. Premier SELV fans have the same clean and sleek styling as the rest of the Premier range, with a white gloss body and fascia. They are designed for easy installation in walls, ceilings, windows or ducted installation at any angle, and LVCF20 models come complete with a brown 100mm grille for wall or soffit fixing. All models come complete with a universal mounting kit and an automatic backdraught shutter. The two part casing permits recessed or surface mounting, and can be fitted into ceilings and studwork wall recesses as little as 50mm deep using the top entry knockout provided and an FDA adaptor and Profile 29 flat duct. Alternatively 100mm diameter circular duct can be used. A clip-off front and removable fan blade make for easy cleaning. 14 LVDX200 LVDX200T LVCF20 LVCF20T Reference number 91453AW 91040AW 91041AW 91042AW Remote switch (not supplied) Integral pullcord Integral adjustable run-on timer (30s to 20mins) Humidity sensor (50-90% RH) Quick visit (2 minutes) Speeds Trickle ventilation facility Extract performance (FID, m 3 /h) boost speed speed speed trickle Extract performance (FID, l/s) boost speed speed speed trickle Sound pressure level (db(a)@3m) boost speed speed speed trickle Max. electrical power rating (W) IP rating IPX5 IPX5 IPX5 IPX5 Weight (kg) Guarantee (years, UK)

15 Models 100 Premier LVDX200 Ref AW High performance centrifugal unit Stylish 2 piece fascia with neon indicator Choice of 2 set speeds Operated by remote switch eg. lighting circuit Premier LVDX200T Ref AW High performance centrifugal unit with timer Stylish 2 piece fascia Operated by remote switch eg. lighting circuit QuickVisit delay feature prevents fan from running should light be switched On/Off again within 2mins Built-in run-on period after light switched Off. User adjustable from 30s-20mins Neon indicator Performance LVDX200 Range Dimensions (mm) LVDX200 Range 100 Installation and Accessories Wall Mounting Hole diameter: 117mm Installation Accessories Wall tube WD100 Wall vent kit VK10 Flush Wall Mounting Ref AA Ref AW Premier LVCF20 Ref AW High performance condensation control centrifugal unit Integral condensation controller Stylish 2 piece fascia User adjustable humidistat (50-90% RH) Room size selector matches extract performance for improved efficiency Trickle ventilation facility Automatic or pullcord manual override Includes external wall grille Neon indicator LVCF20 Range LVCF20 Range 100 Ceiling Mounting with flat ducting Hole diameter: Installation Accessories Flush Ceiling Mounted Premier LVCF20T Ref AW High performance condensation control centrifugal unit with timer (30s-20mins) Integral condensation controller Stylish 2 piece fascia User adjustable humidistat (50-90% RH) Room size selector matches extract performance for improved efficiency Operated by remote switch eg. lighting circuit Trickle ventilation facility Automatic or pullcord manual override Neon indicator Includes external wall grille Surface Ceiling Mounted 117mm or (w 203 x h 233mm flush mounted) Flat ducting XFP see Profile 29 Flexible ducting FD100 Ref AA Condensation trap XCT100 Ref AA Vent cowl VC10 Ref AW Flat duct adaptor FDA Ref AA Ceiling mounting adaptor XCMK Ref AA Typical Specifications on page 160. Wiring Diagrams on page 180. Remote Sensors on page 56. LV transformer Window Mounting Hole diameter: 120mm Installation Accessories Glass mounting kit GMK Ref AA 15 Xpelair Premier LoVolt LVDX200 & LVCF20 Safety Extra Low Voltage ventilation

16 Xpelair Premier LVCF20T DC Centrifugal safety extra low voltage fan with UltraDC technology NEW Key features Type: Application: Control options: Selv UltraDC centrifugal wall fan with condensation control and overrun timer. Intermittent ventilation in toilets & bathrooms. Continuous extract in kitchens, utility rooms, bathrooms or toilets. Pullcord override. Quick visit 2min delay. Adjustable timer overrun. Adjustable humidistat. Legislation: Suitable for IEE Zone 1. Use conforms to Building Regulations Part F1 & Scottish Building Regulations. The Range The new Xpelair Premier Selv with UltraDC technology, safe, energy efficient and long lasting. The Premier is designed with installer selectable settings to satisfy Part F1 installed performances for intermittent ventilation in bathrooms and sanitary accommodation; continuous extract in kitchens, utility rooms, bathrooms and sanitary accommodation. All from one fan with whisper quiet operation. Premier offers centrifugal performance with an UltraDC motor. This ensures a constant pressure development and lower energy use than many axial AC fans and requires no filter. Versatile standard built-in options allow the installer to select any combination of advanced features: active response humidity control, adjustable overrun timer, Quick visit delayed start and pullcord BOOST override. The unit can be surface or recess mounted at any angle. For complete peace of mind Premier LVCF20T DC is IPX5 Safety Extra Low Voltage rated for installation in splash zone 1 and zones 2 / 3 of a bath or shower. Premier features UltraDC offering an 80% reduction in energy use, a choice of installed performances and longer life, typically up to five times longer than a conventional AC motor. For this reason Xpelair offers a 5 year UK only guarantee. Hole diameter: 117mm surface 232(w) x 280(h)mm. Recess mounting. Select the right setting for your application 16 Premier LVCF20T DC Reference number 92288AW Integral pullcord boost override Yes 15l/s Adjustable overrun timer Yes (30sec-20 minutes) Quick Visit delayed On Yes 2 minutes Active response humidistat Yes 70-90% RH. Factory set at 70% RH Selectable installed performances 6l/s 8l/s 13l/s 15l/s assumes installed with WL kit Sound pressure level (db(a)@3m) Electrical power rating 3.5W 3.9W 5.0W 5.1W max IP rating IPX5 Weight 4.25kg Transformer Located outside of spray area Zone 3 Guarantee 5 years

17 Models Dimensions (mm) Premier LVCF20T DC Ref AW UltraDC motor Selectable installed speeds to satisfy Part F1 requirements ( table 1.1a) - Intermittent bathroom 15l/s - Intermittent sanitary accommodation 8l/s - Continuous extract kitchen 13l/s - Continuous extract bathroom 8 l/s - Continuous extract sanitary accommodation 6l/s Active response condensation control humidistat factory set for UK ambient conditions. Installer adjustable from 70-90%RH Built-in run-on period after the light has been switched Off, user adjustable from 30s -20min. Overrun timer is typically connected to a lighting circuit Performance Installation and Accessories Wall Mounting Hole diameter: 115mm Ducting size: 100mm Installation Accessories Easy fit kit EFT Wall Tube WD100 Ref AA Ref AA Quick visit delay feature prevents the fan from running should the light be switched On and Off again within two minutes Auto run status light Pullcord boost override with status light Surface or recess mounting A separate SELV transformer is supplied with the unit for installation outside of Zones 1 & 2 Typical Specifications on page 160. Wiring Diagrams on page 180. Remote Sensors on page 56. Ceiling Mounting Hole diameter: 115mm Ducting size: 100mm Installation Accessories 100 Transformer Ducted Applications Flat ducting XFP see Profile 60 Flexible ducting FD100 Ref AA Condensation trap XCT100 Ref AA Vent cowl VC10 Ref AA Ceiling mounting kit XCMK Ref AA Ventilation Shaft Mounting Hole diameter: 115mm Ducting size: 100mm 17 Xpelair Premier LVCF20T DC Centrifugal safety extra low voltage fan with UltraDC technology

18 Xpelair Premier CF20/40T CV Centrifugal extract and condensation control fans NEW Key features The Range Type: Application: Control options: Legislation: Hole diameter: Constant Volume UltraEC Centrifugal extract fan Intermittent ventilation, Humidity controlled intermittent ventilation, Decentralised ventilation Installer selectable humidistat, timer and pullcord override Conforms to Building Regulations Part F1 115mm The Premier CF20/40T CV model features UltraEC technology offering reduced energy use, a choice of installed performances and a longer life than a conventional AC motor. The fan is designed to comply with the requirements of Part F1 to provide Intermittent Ventilation in Kitchens, Utility rooms, Bathrooms and Sanitary Rooms, Humidity Controlled intermittent Ventilation + manual override in Kitchens and Bathrooms, Intermittent Ventilation in Internal rooms and Decentralised Continuous Ventilation in Kitchens, Utility Rooms, Bathrooms and Sanitary Rooms. Performance is set at installation via a series of internal dip switches. The Constant Volume nature of the fan means that performance remains constant irrespective of the installed condition up to a system pressure of 100Pa. The fan can be surface or flush mounted in walls and ceilings using the universal mounting accessories provided. The fan is provided with a back draught shutter for intermittent applications. It is not to be fitted for the lower velocity continuous decentralised applications. Control options include integral Humidistat, pullcord over-ride, run on timer and 'quick visit' delay start facility. Xpelair offers a 5 year UK only guarantee. Select the right setting for your application At Zero Static Pressure* Speed Settings Extract Performance Noise 3m Power (W) Intermittent Ventilation l/s m 3 /h Kitchen 60l/s 216m 3 /h via integral pullcord W Utility 30l/s 108m 3 /h via integral pullcord W Bathroom 15l/s 54m 3 /h via integral pullcord W Sanitary Room 6l/s 22m 3 /h via remote switch (not supplied) W Humidity Controlled intermittent Ventilation + manual over-ride Kitchen 60l/s 216m 3 /h Off. Humidity. pullcord W Bathroom 15l/s 108m 3 /h 216m 3 /h Off. Humidity. pullcord W Intermittent Ventilation - Internal Rooms Kitchen 60l/s 216m 3 /h + 15min over-run timer triggered via light switch W Utility 60l/s 216m 3 /h + 15min over-run timer triggered via light switch W Bathroom 15l/s 54m 3 /h + 15min over-run timer triggered via light switch W Sanitary Room 15l/s 54m 3 /h + 15min over-run timer triggered via light switch W Decentralised Continuous Ventilation Kitchen 13l/s W Utility 8l/s W Bathroom 8l/s W Sanitary Room 6l/s W *Measured with 300mm of ducting and wall grille fitted on the outlet side. Note: As this is a constant volume product, as the back pressure on the system increases so the motor increases speed to maintain airflow. This has the effect of increasing motor input power. Product is rated at 230V, 50/60Hz, single phase. 18

19 Models Dimensions (mm) Premier CF20/40T CV Ref.92293AW Built in Humidistat controlled intermittent ventilation option Constant Volume centrifugal fan with speed selectable at installation by means of dip switches. UltraEC longlife low energy motor External rotor motor with integral balanced impellers, sealed for life maintenance free bearings and safety thermal cut out protection Fan maintains selected extract volume irrespective of system resistance up to 100Pa Performance Installation and Accessories Wall Mounting Hole diameter: 117mm Ducting size: 100mm Installation Accessories Easy fit kit EFT Wall Tube WD100 Ref AA Ref AA Built in timer controlled intermittent ventilation option for internal rooms Run on period of 20 sec-20min (installer adjustable) after light has been switched Off. Factory set at 15 min in compliance with Part F1 'Quick visit' feature prevents the fan coming on if the room is occupied for less than two minutes Includes external wall grille and fan backdraft shutter for intermittent applications Ceiling Mounting Hole diameter: 117mm Ducting size: 100mm Installation Accessories Typical Specifications on page 161. Wiring Diagrams on page 181. Remote Sensors on page 56. Ducted Applications Flat ducting XFP see Profile 60 Flexible ducting FD100 Ref AA Condensation trap XCT100 Ref AA Vent cowl VC10 Ref AA Ceiling mounting kit XCMK Ref AA Ventilation Shaft Mounting Hole diameter: 117mm Ducting size: 100mm 19 Xpelair Premier CF20/40T CV Centrifugal extract and condensation control fans

20 Xpelair Profile 29 & Profile 25M Flat duct systems Key features The Range Type: Application: Size options: Installation: Low profile flat plastic & metal ducting Particularly suitable for use with Premier DX180, DX200/400 & CF20/40 models. Plastic 234mm x 29mm (GSM) Metal 230mm x25mm Simple push fit & easily concealed The ideal ducting solution for a variety of domestic installations where ceiling or wall space is limited. In many refurbishment projects walls or ceilings are battened to provide a narrow space for services such as plumbing electrical wiring and ventilation. Where space is limited Profile duct is ideal above kitchen wall units, in cavity walls and even under floors. Xpelair Profile 29 is an easy to assemble, push fit, modular ventilation duct system designed for flush mounted fan installation within a minimum gap of 50mm ceiling void. It is lightweight and easy to cut to length using a cross-cut saw. Profile 29 systems are non reverberant and will not deteriorate in applications where high humidity is present. The system includes a full range of vertical and horizontal bends including special adaptors for connection to the top and rear of Premier DX200 & CF20 centrifugal fans. The extensive range of accessories offers the flexibility to achieve almost any ducting configuration in particularly tight spaces. Assembly is easy using push fit flat channel connectors and the system is held to the wall or ceiling using quickfit support clips. The ducting can be terminated in a conventional wall grille or a choice of horizontal or soldier course airbricks, and is then simply concealed behind plasterboard. Some applications call for traditional galvanised sheet steel ducting. For these applications Profile 25M metal flat ducting can be used. Profile 25M measures 230 x 25mm and is also available in an extensive range of interconnecting components. With a depth of only 25mm it is ideal for installation between the floor/ceiling slab and the plasterboard finish. It can be fixed to the ceiling/wall by suitable fixings through the continuous flange on either side. All joints should be sealed with a sealing compound. Profile 60 flat plastic duct system is also available for installations where a particularly low profile duct is not required, or where longer duct runs are required. Details shown on page Exploded diagram of flush mounted Premier DX200 installation 20

21 Profile 29 Flat Plastic Ducting - w234 x h29mm Product Product Ref Description Dimensions Ref. No. XFD Flat channel duct 1m 234 x AA Flat channel duct 1.5m 234 x AA Flat channel duct 2m 234 x AA XFC Flat channel connector 234 x AA XFH90 Horizontal 90º bend 234 x AA XFH45 Horizontal 45º bend 234 x AA XFV90 Vertical 90º bend 234 x AA XFV45 Vertical 45º bend 234 x AA Profile 25M Flat Metal Ducting - w230x h25mm Product Product Ref Description Dimensions Ref. No. FMD Flat ducting 230 x AA 2.4 metre length FMH90 Horizontal 90º bend 230 x AA FMTB Transition/air brick 230 x AA FMP Plenum box 230 x AA FMV90 Vertical 90º bend 230 x AA FMH45 Horizontal 45º bend 230 x AA FMC Coupling (boxed in 6 s) 230 x AA XFEP Elbow bend/plenum 234 x AA 100mm ID spigot (female) XFRRA Round to rectangular adaptor 234 x AA 100mm ID spigot (female) XFS Universal support clip 91114AA FDA Flat ducting adaptor kit 90547AA XFLAA Long airbrick adaptor 234 x AA XFAF Airbrick fascia terracotta 205 x AA Airbrick fascia white 205 x AA Airbrick fascia brown 205 x AA Airbrick fascia cotswold stone 205 x AA XFAS Airbrick soldier course 91246AA XFWT 100mm telescopic wall tube 91247AA Typical Specifications on page 161. Dimensions (mm) Profile 29 Flat channel outer dimensions are w240 x h34 mm and fit directly into system parts sockets to create ducting runs. Cross section: 6786mm 2 Minimum space required for installation: w240 x h38mm Typical installation of Premier DX200 with Profile 29 ducting Profile 25M Flat channel outer dimensions are w230 x h25mm and fit directly into system parts sockets to create ducting runs. Cross section: 5750mm 2 Minimum space required for installation: w235 x h30mm Xpelair Profile 29 & Profile 25M Flat duct systems 21

22 Xpelair DX100 & XX mm Axial extract fans DX100 XX100 Key features Application: Control options: Legislation: Hole diameter: Domestic bathrooms, shower rooms and toilets. All models come complete with wall and window fitting kit Pullcord, timer, humidistat and PIR Conforms to Building Regulations Part F1 117mm (wall/ceiling) 125mm (window) 110mm (shaft/ducting) DX100 fan complete with Universal Mounting Kit Select the right product for your application The Range A comprehensive range of stylish, compact and easy to install single speed fans. Suitable for a wide range of domestic applications including bathrooms, shower rooms and toilets, including zones 1 & 2. Also suitable for commercial applications such as hotel bathrooms, office toilets and other small rooms. DX100 models have a softly curved flowline grille design which will blend into wall or ceiling décor, whilst the shallow depth of the outlet spigot ensures compact window installation. All models come complete with a universal mounting kit (wall tube, gasket x2, outer grille, skirt moulding for window) suitable for wall, ceiling or window mounting (in single glazing up to 6mm) applications. The DX range includes an air operated backdraught shutter, outer grille and ducting. Control options include integral pullcord and timer; humidistat and PIR options offer automatic control. XX100 models are supplied without a kit and are ideal for replacement applications or where a suitable outlet already exists. All models are IPX5 rated (except DX100PIR) and BEAB approved, demonstrating accredited levels of safety. They are all suitable for V 50Hz mains operation, have lubricated for life motors, Class B insulation for operation in ambient temperatures up to 40ºC and are fitted with a thermal cut out. DX100 DX100PC DX100T DX100H DX100HP DX100PIR XX100 XX100P XX100T Reference number 90839AW 90840AW 90841AW 90842AW 90843AW 90844AW 90872AW 90873AW 90874AW Remote switch (supplied separately) Integral pullcord Integral timer (adjustable from 2-20 mins) Humidity sensor (50-90% RH) Passive infrared sensor Maximum air flow (FID, m 3 /h) Maximum air flow (FID, l/s) Sound pressure level (db(a)@3m) Electrical power rating (W) IP rating IPX5 IPX5 IPX5 IPX5 IPX5 IPX4 IPX5 IPX5 IPX5 Universal mounting kit Weight (kg) Guarantee (years, UK)

23 Models DX100 Ref AW Single speed axial unit Operated by a remote switch or sensor (In a bathroom normally a separate pullcord or the lighting circuit) Includes universal mounting kit Colour: White DX100PC Ref AW Single speed axial unit with pullcord Operated by integral pullcord Includes universal mounting kit Colour: White DX100T Ref AW Single speed axial unit with timer Timer triggered by a remote switch - usually the lighting circuit Adjustable timer (2-20mins) Includes universal mounting kit Colour: White DX100H Ref AW Single speed axial unit with humidistat Automatic On/Off operation by integral humidity sensor, adjustable from 50-90% RH Timer function adjustable (2-20mins) Includes universal mounting kit Colour: White DX100HP Ref AW Single speed axial unit with humidistat and pullcord Timer function adjustable (2-20mins) Dimensions (mm) DX100 Range Installation and Accessories Wall Mounting using kit provided Hole diameter: 117mm Ducting size: 100mm Alternative Accessories Easy fit kit EFT Ref AA Vent cowl VC10 Ref AA Air brick adaptor XAA Ref AA Ceiling Mounting Hole diameter: 117mm Ducting size: 100mm Installation Accessories Condensation trap XCT100 Ref AA Vent cowl VC10 Ref AA Automatic On/Off operation by integral humidity sensor, adjustable from 50-90% RH Pullcord On feature overrides the autohumidity sensor function Includes universal mounting kit Colour: White DX100PIR Ref AW Single speed axial unit with PIR detector Automatic On/Off operation Integral passive infrared sensor Includes universal mounting kit Colour: White XX100 Ref AW Single speed axial unit Operated by remote switch Colour: White XX100P Ref AW Single speed axial unit with pullcord Operated by integral On/Off pullcord Colour: White XX100T Ref AW Single speed axial unit with timer Normally triggered by a remote switch, for example the lighting circuit Colour: White Typical Specifications on page 161. Wiring Diagrams on page 181. Remote Sensors on page 56. Back draught shutter Wall Mounting using kit provided Hole diameter: 125mm Max. glass thickness: 6mm Installation Accessories Double glazing kit DXDG Ref AA Controllers Remote Humidistat XRH Ref AW Stand alone humidistat switches fan On/Off when RH reaches pre-set levels. Complete with pullcord override switch Time Delay Unit DT20B Ref AW User adjustable run on timer (2-20mins) Passive Infrared Sensor XPIRA Ref AA Activates fan via body movement. Ideal for infrequently used public spaces. Built in timer to prevent nuisance tripping Performance DX100 / XX100 Range XX100 Ventilation Shaft Mounting Hole diameter: 110mm Ducting Application Hole diameter: 110mm Ducting size: 100mm Installation Accessories Condensation trap XCT100 Ref AA 23 Xpelair DX100 & XX mm axial extract fans

24 Xpelair LoVolt LV100 Safety Extra Low Voltage 100mm axial extract fans Key features Application: Control options: Legislation: Hole diameter: Domestic bathrooms, shower rooms and toilets. All models come complete with wall and window fitting kit Pullcord, timer, humidistat & PIR Conforms to Building Regulations Part F1 117mm (wall/ceiling) 125mm (window) 110mm (shaft/ducting) DX100 fan complete with universal mounting kit Select the right product for your application The Range Water, water everywhere and none in the right place! Whether you are showering, or leaving the kids splashing in the bath, water gets everywhere. Xpelair LV100 fans are 12V Safety Extra Low Voltage (SELV) units offering complete peace of mind. These fans are specifically designed to be installed directly in or over the splash area zone 1 in complete safety, with the SELV transformer sited out of reach of any person using the bath or shower. The front fascia with its softly curved flowline grille design will blend into wall Ideal for splash areas or ceiling décor, whilst the shallow depth of the outlet spigot ensures compact window installation. All models come complete with a universal mounting kit suitable for wall, ceiling or window mounting (in single glazing up to 6mm) applications. The kit includes an air operated backdraught shutter and all models are supplied with a 12V SELV transformer. Control options include integral pullcord and timer. Humidistat and PIR options offer automatic control. The LV100 range conform to Building Regulations mechanical ventilation for toilets and bathrooms. The Xpelair SELV system exceeds the IP requirements for zone1 and zone 2 as defined by IEE wiring Regulations (16th Edition) BS 7671:2001. All models are IPX5 rated and BEAB approved, demonstrating accredited levels of safety. They are all suitable for V 50Hz mains operation, have lubricated for life motors, Class B insulation for operation in ambient temperatures up to 40ºC and are fitted with a thermal cut out. 24 LV100 LV100PC LV100T LV100H LV100HP LV100PIR Reference number 90845AW 90846AW 90847AW 90848AW 90849AW 90867AW Remote switch (supplied separately) Integral pullcord Integral timer (adjustable from 2-20 mins) Integral humidity sensor (50-90% RH) Passive infrared sensor Extract performance (FID, m 3 /h) Extract performance (FID, l/s) Sound pressure level (db(a)@3m) Electrical power rating (W) IP rating IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 Weight (kg) Guarantee (years, UK)

25 Models Controllers LV100 Ref AW Single speed 12V SELV axial unit and remote SELV transformer Operated by remote switch or sensor (in a bathroom normally a separate pullcord or lighting circuit) Includes universal mounting kit Colour: White LV100PC Ref AW Single speed 12V SELV axial unit with pullcord and remote SELV transformer Operated by integral pullcord Includes universal mounting kit Colour: White LV100T Ref AW Single speed 12V SELV axial unit with timer and remote SELV transformer Timer triggered by a remote switch, for example the lighting circuit. Timer variable from 2-20mins Includes universal mounting kit Colour: White LV100H Ref AW Single speed 12V SELV axial unit with humidistat and remote SELV transformer Automatic On/Off operation by integral Dimensions (mm) LV100 Range Installation and Accessories Wall Mounting using kit provided Hole diameter: 117mm Ducting size: 100mm Alternative Accessories Easy fit kit EFT Ref AA Air brick adaptor XAA Ref AA Ceiling Mounting Hole diameter: 117mm Ducting size: 100mm Installation Accessories Condensation trap XCT100 Ref AA Vent cowl VC10 Ref AA humidity sensor. Adjustable from 50-90% RH Adjustable timer function (2-20mins) Includes universal mounting kit Colour: White LV100HP Ref AW Single speed 12V SELV axial unit with humidistat, pullcord and remote SELV transformer Automatic On/Off operation by integral humidity sensor. Adjustable from 50-90% RH Adjustable timer function (2-20mins) Pullcord On feature overrides the autohumidity sensor function Includes universal mounting kit Colour: White LV100PIR Ref AW Single speed 12V SELV axial unit with PIR detector and remote SELV transformer Automatic On/Off operation Integral passive infrared sensor Adjustable timer function (2-20mins) Includes universal mounting kit Colour: White Typical Specifications on page 162. Wiring Diagrams on page 181. Domestic Accessories on page 56. Back Draught Shutter Window Mounting using kit provided Hole diameter: 125mm Max. glass thickness: 6mm Installation Accessories Double glazing kit DXDG Ref AA LoVolt Remote Humidistat LVH Ref AW Stand alone humidistat switches fan On/Off when the relative humidity reaches pre-set levels. This level is user adjustable to suit each application Performance LV100 Range LV100 Transformer Ventilation Shaft Mounting Hole diameter: 110mm Ducting Application Hole diameter: 110mm Ducting size: 100mm Installation Accessories Condensation trap XCT100 Ref AA 25 Xpelair LoVolt LV100 Safety Extra Low Voltage 100mm axial extract fans

26 Xpelair Slimline SL100, SL150 & SG150HP Wafer thin axial fans NEW SL100 SL150 SG150HP Key features Application: Control options: Legislation: Spigot diameter: Excludes the SG150HP Domestic bathrooms, shower rooms, toilets, wall, ceiling and window fitting. For wall or duct mounting Pullcord, timer & humidistat Conforms to Building Regulations Part F1 100mm (SL100) 150mm (SL150) The Range Meet the new generation of Xpelair Slimline SL100 and SL150 fans, with wall hugging wafer-thin grilles designed for modern living. They are white in colour and are ideal for domestic bathrooms, shower rooms, toilets and other small rooms. With an internal projection of only 10mm, the 100mm Xpelair Slimline unit is one of the lowest profile bathroom fans available. For bigger bathrooms Slimline is also available in a 150mm size offering performance and style (SG150HP internal projection of 58mm). For rooms with no opening windows Slimline SL100 is available with a built-in overrun timer. Humidistat models are available for shower rooms and heavily used bathroom applications. Ordering is straightforward: simply select the size and control option required, then add the appropriate window or wall kit (SG150HP comes with a window kit). But the Slimline range doesn t just have a pretty face, installation is simple too. All Slimline models have two adjustable QuickClamp fixings which make traditional wall plug and screw fixings a thing of the past (excluding the SG150HP). The IPX4 rated units fully meet the requirements of the Building Regulations for bathrooms, toilets and kitchens and the IP requirements for zone 1 and zone 2 as defined by the IEE Wiring Regulations (16th Edition) BS7671:2001. All models are suitable for a supply voltage of V 50Hz and ambient temperatures up to 40ºC. Wafer thin grille Select the right product for your application 26 SL100 SL100P SL100T SL100HT SL150 SL150P SL150T SL150HT SL150HP SG150HP Reference number 91225AW 91226AW 91227AW 91228AW 91229AW 91230AW 92361AW 91231AW 91496AW 92349AW Remote switch (supplied separately) Integral pullcord Integral timer (adjustable up to 15 mins) * * Integral humidity sensor (45-99% RH) ** ** Extract performance (FID, m 3 /h) Extract performance (FID, l/s) Sound pressure level (db(a)@3m) Electrical power rating (W) IP rating IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 IPX2 Weight (kg) Guarantee (years, UK) * Adjustable upto 0-35 mins ** 50-80% RH

27 Models SL100 Ref AW Single speed axial fan Operated by remote switch or sensor (in a bathroom normally a separate pullcord or lighting circuit) Colour: White SL100P Ref AW Single speed axial fan with pullcord Operated by integral On/Off pullcord switch Colour: White SL100T Ref AW Single speed axial fan with timer Timer triggered by remote switch-usually the lighting circuit Timer variable from 3-15mins Colour: White SL100HT Ref AW Single speed axial fan with humidistat and overrun timer Built in adjustable humidistat Performance Dimensions (mm) SL100 Range Installation and Accessories Wall Mounting Hole diameter: 117mm (SL100) 157mm (SL150) Installation Accessories SL100 wall kit SLWK Ref AW SL150 wall kit SLWK Ref AW Integrated overrun timer eliminates nuisance tripping Timer variable from 45s-15mins Colour: White SL150 Ref AW Single speed axial fan Operated by a remote switch or sensor, usually a lighting circuit Built in backdraught shutter Colour: White SL150P Ref AW Single speed axial fan with pullcord Operated by integral On/Off pullcord switch Built in backdraught shutter Colour: White SL150HT (SL150T see page 39) Ref AW Single speed axial fan with humidistat and overrun timer Built in adjustable humidistat Integrated overrun timer eliminates nuisance tripping Timer variable from 45s-15mins SL150 Range Ceiling Mounting Hole diameter: mm (SL100) 157mm (SL150) Installation Accessories Flexible ducting FD100 Ref AA Flexible ducting FD150 Ref AA Condensation trap XCT100 Ref AA Window Mounting Hole diameter: 190 Built in backdraught shutter Colour: White SL150HP Ref AW Speed increases automatically as humidity increases Integral On/Off pullcord gives full speed manual override Built in backdraught shutter Colour: White SG150HP Ref AW Speed increases automatically as humidity increases Integral On/Off pullcord gives full speed manual override Built in backdraught shutter Colour: White Can be window mounted, and has a built in silent action electro-thermo shutter cassette, and an external grille Typical Specifications on page 162. Wiring Diagrams on page 181. Domestic Accessories on page 59. Controllers Passive Infrared Sensor XPIRA Ref AA Activates fan via body movement Ideal for infrequently used public spaces Built in timer to prevent nuisance tripping Remote Time Controller DT20B Ref AW User adjustable run-on timer (2-20mins) 100mm (SL100) 150mm (SL150) Installation Accessories SL100 window kit Ref AW SL150 window kit* Ref AW SG150HP * Backdraught shutter must be removed Ducted Applications Hole diameter: 117mm (SL100) 157mm (SL150) Duct diameter: 100mm (SL100) 150mm (SL150) Installation Accessories Flexible ducting FD100 Ref AA Flexible ducting FD150 Ref AA 27 Xpelair Slimline SL100, SL150 & SG150HP Wafer thin axial fans

28 Xpelair CentrX Centrifugal panel fans CT100 CT100+ Key features The Range Application: Control options: Legislation: Hole diameter: Domestic bathrooms, shower rooms, toilets and utility rooms for wall or duct mounting Pullcord, timer & humidistat Conforms to Building Regulations Part F1 150mm (CT100) 100mm (CT100+) CentrX is a range of two sizes of pressure developing centrifugal panel fans for ducted or through the wall applications. They are the ideal solution for ducted applications where extra pressure development is required, including toilets, bathrooms, shower rooms and utility rooms. They are recommended in place of an axial fan in exposed coastal situations or exposed high rise applications. They are also suitable for commercial applications for the ventilation of small internal rooms. The slim stylish grille is easily recognisable as Xpelair, with a bellmouth entry and finger guard through which air is drawn directly into the eye of the high performance centrifugal fan. The spigot outlet on both sizes of unit is only 100mm reducing space requirements for flexible ducting or Profile 60 rigid flat ductwork, all models come with built in backdraught shutter. For simplified installation models are available with a built-in overrun timer and humidistat. They can be installed at any angle. All have an 'On' indicator light and a maintenance free motor with sealed for life bearings and safety thermal overload protection. Profile 60 duct work shown on page Slim stylish grille Select the right product for your application CT100 CT100T CT100HT CT100+ CT100+P CT100+HT Reference number 91236AW 91237AW 91238AW 91239AW 91240AW 91241AW Remote switch (supplied separately) Integral pullcord Integral timer (adjustable) Integral humidity sensor Extract performance (FID, m 3 /h) Extract performance (FID, l/s) Sound pressure level (db(a)@3m) Electrical power rating (W) IP rating IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 Weight (kg) Guarantee (years, UK)

29 Models CT100 Ref AW Centrifugal panel fan Can be installed at any angle Operated by remote switch or sensor. In a bathroom usually a pullcord or wired to the lighting circuit On indicator light Slim fascia with bellmouth and fingerguard 100mm duct spigot Maintenance free motor with sealed for life bearings and safety thermal overload protection Colour: White CT100T Ref AW Centrifugal panel fan with timer Connected to the room wiring circuit. Provides a preset timed overrun (3-15mins) after the light has been switched off Can be installed at any angle. On indicator light. Slim fascia with bellmouth and fingerguard 100mm duct spigot Maintenance free motor with sealed for life bearings and safety thermal overload protection Colour: White Performance CT100HT Ref AW Centrifugal panel fan with humidistat and timer Auto humidity control switches the fan on with a rise in humidity above the preset level. Overrun timer (adjustable from 45s-15min) ensures the absence of nuisance tripping Can be installed at any angle On indicator light Slim fascia with bellmouth and fingerguard 100mm duct spigot Maintenance free motor with sealed for life bearings and safety thermal overload protection Colour: White CT100+ Ref AW High output centrifugal panel fan For larger bathrooms and utility rooms Can be installed at any angle Operated by proprietary remote switch or sensor With bellmouth and fingerguard 100mm duct spigot Maintenance free motor with sealed for life bearings and safety thermal overload protection Colour: White CT100+P Ref AW Integral pullcord operation With bellmouth and fingerguard 100mm duct spigot Maintenance free motor with sealed for life bearings and safety thermal overload protection Colour: White CT100+HT Ref AW With integral humidistat Auto humidity control switches the fan on with a rise in humidity above the preset level. Overrun timer (adjustable from 45s-15min) prevents nuisance tripping Can be installed at any angle With bellmouth and fingerguard 100mm duct spigot Maintenance free motor with sealed for life bearings and safety thermal overload protection Colour: White Typical Specifications on page 162. Wiring Diagrams on page 181. Remote Sensor on page 56. Controllers Remote Humidistat XRH Ref AW Stand alone humidistat switches fan On/Off when RH reaches pre-set levels. Complete with pullcord override switch Remote Time Controller DT20B Ref AW User adjustable run on timer (2-20mins) Dimensions (mm) CentrX 100 Range Installation and Accessories Wall Mounting Hole diameter: CT mm CT mm Ducting size: 100mm Ceiling mounting with ducting Hole diameter: CT mm CT mm Ducting size: 100mm CentrX 100+ Range Installation Accessories Wall Mounting Wall tube WD100 Ref AA Telescopic wall vent kit VK10 Ref AW Ceiling Mounting Flexible ducting FD100 Ref AA Ceiling mounting adaptor Ref AA Condensation trap XCT100 Ref AA Weather cowl VC10 Ref AA Passive Infrared Sensor XPIRA Ref AA Activates fan via body movement. Ideal for infrequently used public spaces. Built in timer to prevent nuisance tripping 29 Xpelair CentrX Centrifugal panel fans

30 Xpelair XIL & XXS Inline shower fan systems Axial extract fans for shower cubicle applications Key features The Range Type: Application: Control options: Legislation: Hole diameter: Inline single speed axial extract fan systems Domestic bathrooms and shower rooms Standard or timer Conforms to Building Regulations Part F1 117mm (XIL100/XXS100) 140mm (XIL125) 165mm (XIL150) Step out of the shower cubicle. Is the mirror steamed over?... There is another way. Remove the cause of condensation at source with an Xpelair inline shower fan system. With a neat grille installed directly over the shower, humid or moist air will be ducted away by a fan above the ceiling and onwards to a grille installed outside, typically in the soffit. Will I be standing in a draught? No, air will not be pulled into a normal cubicle, only flow over it. XIL fans are available in sizes of 100, 125 & 150mm and are only available as fan systems. The systems contain all the components necessary for a normal installation, comprising: inline fan 3m of flexible duct Four worm drive clips inline backdraught shutter (XIL100 only) Internal ceiling grille with sleek styling in white Outside soffit/wall grille XXS100 fans are available on their own. All electronics circuits and wiring terminals are fully protected. Motors are Class B lubricated for life, fitted with safety thermal overload protection and suitable for ambient temperatures up to 40ºC. Xpelair XIL systems conform to Building Regulations mechanical ventilation for toilets shower rooms and bathrooms. Select the right product for your application Shower Fan Systems Fan Only XIL100 XIL100T XIL125 XIL125T XIL150 XIL150T XXS100 XXS100T Reference number 90329AW 90330AW 91242AW 91243AW 91244AW 91245AW 90331AW 90332AW Remote switch (not included) Fan only Fan system (installation pack) Integral timer (adjustable) Extract performance (m 3 /h*) FID 95 FID Extract performance (l/s*) FID 26 FID Sound pressure level (db(a)@3m) Electrical power rating (W) Duct diameter (mm) Hole diameter (mm) IP rating IPX2 IPX2 IPX2 IPX2 IPX2 IPX2 IPX2 IPX2 Weight (kg) Guarantee (years, UK) *XXS fan only performance measured FID, XIL fan systems measured in typical installation (comprising 90 o bend on the inlet & outlet plus 3m of duct). 30

31 Models XIL100 Ref AW Single speed inline showerfan system. Operated by remote switch (in a bathroom whether by remote pullcord switch or wired to the lighting circuit) Can also be wired to a water flow switch fitted in the pipework to the shower control to switch On/Off when the shower is in use XIL100T Ref AW Single speed inline showerfan system Built-in overrun timer (adjustable at installation from 2-20mins) Operated by remote switch or sensor (in a bathroom wired to the lighting circuit) Can also be wired to a water flow switch, fitted in the pipework to the shower control, to switch On/Off when the shower is in use XIL125 Ref AW Single speed inline showerfan system Operated by remote switch or sensor (in a bathroom either by a remote pullcord Performance XXS100 fan only Dimensions (mm) XIL range Installation and Accessories Internal Grille In-Line Back Draught Shutter Wall Mounting In-Line Duct Fan Flexible Ducting Hole diameter: 117/140/165mm* Ducting size: 100/125/150mm* *refer to table opposite External Grille switch or wired to the lighting circuit) Can also be wired to a water flow switch fitted in the pipework to the shower control to switch On/Off when the shower is in use XIL125T Ref AW Single speed inline showerfan system Built-in overrun timer (adjustable at installation from 3-15mins) Operated by remote switch (in a bathroom wired to the lighting circuit) Can also be wired to a water flow switch, fitted in the pipework to the shower control, to switch On/Off when shower is in use XIL150 Ref AW Single speed inline showerfan system Operated by remote switch (in a bathroom either by a remote pullcord switch or wired to the lighting circuit) Can also be wired to a water flow switch fitted in the pipework to the shower control to switch On/Off when the shower is in use Dimensions (mm) Model ØA B C XIL100/T XIL125/T XIL150/T XXS100/T Loft Mounting Hole diameter: 117/140/165mm* Ducting size: 100/125/150mm* *refer to table opposite XIL125/150 XIL150T Ref AW Single speed inline showerfan system Built-in overrun timer (adjustable at installation from 3-15mins) Operated by remote switch (in a bathroom wired to the lighting circuit) Can also be wired to a water flow switch, fitted in the pipework to the shower control, to switch On/Off when shower is in use XXS100 Ref AW Single speed inline fan Operated by remote switch or sensor XXS100T Ref AW Single speed inline fan Integral timer operated by remote switch (adjustable from 2-20mins) Typical Specifications on page 163. Wiring Diagrams on page 182. Remote Sensors on page Xpelair XIL & XXS Inline shower fan systems Axial extra fans for shower cubicle applications

32 Xpelair BriteX LoVolt & BriteX Turbo Shower fan and light systems Key features The Range Type: Application: Control options: Legislation: Hole diameter: Inline single speed axial / mixed flow extract fan systems Domestic toilets, bathrooms & shower rooms Standard or timer Conforms to Building Regulations Part F1 102mm Brighten up your showering experience. Shut the door on your shower and you are probably standing in the darkest part of your bathroom. Xpelair BriteX range is designed to extract condensation laden air directly from above the shower whilst bathing the cubicle in warm light. Xpelair BriteX kits include everything needed for a standard installation including a stylish ceiling inlet complete with bezel and 12V 35W sealed dichroic lamp, an inline extract fan, 12V Safety Extra Low Voltage (SELV) transformer, flexible ducting, duct ties and a soffit/wall grille. The kits are available in a choice of white or chrome bezel. BriteX LoVolt is suitable for shorter duct runs (3m duct supplied) in shower cubicles, bathrooms and toilets. For larger shower rooms and longer ducts choose BriteX Turbo which comes complete with 6 meters of flexible ducting. For bathrooms without windows versions with an adjustable timer overrun are available, adjustable from 1-20 minutes. The fan is typically connected to the bathroom lighting, and it continues to run after the light has been switched off. The motor housing is made from ABS and has a detachable mounting foot. All BriteX systems can be installed in zone 1 in accordance with IEE Regulations 16th Edition. All versions are IPX4 rated and suitable for use with a supply voltage of V 50Hz. The fan motor is sealed for life maintenance free and is fitted with safety thermal overload protection. Select the right product for your application Axial Mixed flow BX100W BX100WT BX100C BX100CT BX100+W BX100+WT BX100+C BX100+CT Reference number 92276AW 92277AW 92278AW 92279AW 91248AW 91250AW 91249AW 91251AW Performance standard standard standard standard turbo turbo turbo turbo Remote switch (supplied separately) Lamp (12V 35W) LoVolt LoVolt LoVolt LoVolt LoVolt LoVolt LoVolt LoVolt Integral timer (adjustable from 1-20 mins) Extract performance (m 3 /h) Extract Performance (l/s) Duct length (supplied) 3m 3m 3m 3m 6m 6m 6m 6m Sound pressure level (db(a)@3m) Fan electrical power rating (W) Hole diameter (mm) IP rating IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 Colour white white chrome chrome white white chrome chrome Weight (kg) Guarantee (years, UK)

33 Models BriteX LoVolt BX100W white bezel Ref AW BX100C chrome bezel Ref AW Suitable for shower cubicles, bathrooms and toilets 3m of flexible ducting Stylish SELV rated air inlet with 35W sealed dichroic lamp SELV transformer IPX4 rated double insulated fan ABS housing with detachable mounting foot Sealed for life maintenance free motor Safety thermal overload protection Duct ties Soffit/wall grille colour brown BriteX LoVolt T BX100WT white bezel Ref AW BX100CT chrome bezel Ref AW 3m of flexible ducting Fan fitted with overrun timer adjustable from 1-20mins Fan is typically connected to the bathroom lighting. Fan continues to run after the light has been switched off Performance Britex LoVolt BX100 Dimensions (mm) BriteX LoVolt Range (axial) Installation BriteX units can be installed with the inlet located in Zone 1 of a bath or shower in accordance with IEE regulations. The inlet bezel/light assembly fits flush to the ceiling. The fan is installed at the highest point in the duct run using the bracket provided to avoid a possible build up of condensation in the duct. It is good practice to cut off any surplus duct. Extended duct and radiused bends improve performance. The grille provided can be installed in the soffit of the roof or in a gable end wall. Suitable for shower cubicles, bathrooms and toilets Stylish SELV rated air inlet with 50W sealed dichroic lamp SELV transformer IPX4 rated double insulated fan. ABS housing with detachable mounting foot Sealed for life maintenance free motor Safety thermal overload protection Duct ties Soffit / wall grille colour brown BriteX Turbo BX100+W white bezel Ref AW BX100+C chrome bezel Ref AW Suitable for longer duct runs and larger bathrooms 6m of flexible ducting Stylish SELV rated air inlet with 35W sealed dichroic lamp SELV transformer IPX4 rated double insulated mixed flow inline fan. ABS housing with detachable mounting foot Sealed for life maintenance free motor Safety thermal overload protection Duct ties Soffit/wall grille colour brown BritexTurbo Britex LoVolt Installation Hole diameter: 102mm Ducting size: 100mm BriteX Turbo Range (mixed flow) BriteX Turbo T BX100+WT white bezel Ref AW BX100+CT chrome bezel Ref AW Fan fitted with overrun timer adjustable from 3-15mins 6m of flexible ducting Fan typically connected to the bathroom lighting. Fan continues to run after the light has been switched Off Stylish SELV rated air inlet with 35W sealed dichroic lamp SELV transformer IPX4 rated double insulated mixed flow inline fan. ABS housing with detachable mounting foot Sealed for life maintenance free motor Safety thermal overload protection Duct ties Soffit / wall grille colour brown Typical Specifications on page 163. Wiring Diagrams on page 182. SELV Ceiling Bezel Britex Turbo Installation Hole diameter: 102mm Ducting size: 100mm 33 Xpelair BriteX LoVolt & BriteX Turbo Shower fan and light systems

34 Xpelair XIM Domestic inline mixed flow extract fans Key features The Range Type: Application: Control options: Legislation: Inline one or two speed mixed flow extract fans Domestic bathrooms, utility rooms, shower rooms and kitchens Standard or timer Conforms to Building Regulations Part F1 Traditionally centrifugal ducted systems have been bulky and noisy. Well not any more. The new low profile Xpelair XIM units provide plenty of useable power for domestic ducted applications and save on space too. The seven models in the range are ideal for ducted applications where space is limited, such as in bathrooms, shower rooms, kitchens and other internal rooms without opening windows. Available in four sizes, the new Xpelair XIM range of plastic mixed flow units offers duties for a wide range of ducted applications. They are dimensionally smaller than centrifugal units and with lower sound levels these units can often eliminate the need for a silencer. The two T models have a timer overrun adjustable from 3 to 15 minutes. Larger units have two speeds. All models come complete with a convenient mounting cradle which makes installation or subsequent inspection simple. The terminal box is easily accessible simplifying the electrical connection. XIM units are either IPX2 or IPX4. Those rated IPX4 can be used in wet room ducted applications. Their plastic construction will not deteriorate in high humidity conditions. They are double insulated and suitable for operation on a supply voltage V 50Hz. All motors are maintenance free with greased for life bearings, and have safety overload protection. Select the right product for your application XIM100 XIM100T XIM100+ XIM100+T XIM125 XIM150 XIM150T XIM200 Reference number 91252AW 91253AW 91254AW 91473AW 91255AW 91256AW 91257AW 91258AW Speeds Remote switch (supplied separately) Integral timer (adjustable from 3-15 mins) Max. extract performance (FID m 3 /h) Min. extract performance (FID m 3 /h) Max. extract performance (FID l/s) Min. extract performance (FID l/s) Max. sound pressure level (db(a)@3m) Max. electrical power rating (W) Duct size (mm) IP rating IPX2 IPX2 IPX4 IPX4 IPX4 IPX4 IPX4 Weight (kg) Guarantee (years, UK)

35 Models XIM100 Ref AW Single speed inline fan Mixed flow impeller/guide vanes Integral mounting cradle Rated as IPX2 XIM100T Ref AW Single speed inline fan with adjustable overrun timer from 3-15mins Timer located in the terminal box Triggered by lighting circuit Mixed flow impeller/ guide vanes Integral mounting cradle Rated as IPX2 XIM100+ Ref AW High performance 2 speed inline fan Mixed flow impeller/guide vanes Integral mounting cradle Rated as IPX4 XIM125 Ref AW 2 speed inline fan Mixed flow impeller/guide vanes Integral mounting cradle Rated as IPX4 XIM150 Ref AW 2 speed inline fan Mixed flow impeller/guide vanes Plastic construction Integral mounting cradle Rated as IPX4 XIM150T Ref AW Adjustable overrun timer from 3-15mins 2 speed inline fan Timer located in the terminal box Timer triggered by lighting circuit Mixed flow impeller/guide vanes Integral mounting cradle Rated as IPX4 XIM200 Ref AW 2 speed inline fan Mixed flow impeller/guide vanes Integral mounting cradle Rated as IPX4 Performance Controllers Change Over Switch COS Ref AW Provides High-Low speed operation Surface or recess mounting 85 x 85mm Dimensions (mm) XIM100/100+/125 Installation and Accessories XIM Wall installation XIM150/200 Installation Accessories Wall Mounting Flexible Ducting Xflex FD100 (3m) Ref AA Flexible Ducting Xflex FD125 (3m) Ref AA Flexible Ducting Xflex FD150 (3m) Ref AA Flexible Ducting Xflex FD200 (3m) Ref AA Wall grille CFWG100 Ref AW Wall grille CFWG150 Ref AW Xflex FD also available in longer length (see page 57) Wall grille CFWG also available in grey Typical Specifications on page 163. Wiring Diagrams on page 182. Remote Sensor on page 56. Dimensions (mm) Model ØA B C D E F G XIM XIM XIM XIM XIM Xpelair XIM Domestic inline mixed flow extract fans

36 Kitchens and Utility Rooms Ummm something smells nice The kitchen is often the focal point of the home. It s the place where we cook, wash up, eat and often entertain. It s also a source of heat, steam, and odours. Cooking smells can wet your appetite but unchecked they drift and linger throughout the house. Condensation can damage furnishings and too much heat can be a real problem in modern wellinsulated dwellings. Properly ventilated, the kitchen can remain a fresh environment in which to work and live. Utility rooms are often a mix of heat from laundry equipment and VOC s from cleaning materials. They are subject to a variety of uses from clothes drying to washing the dog! Ventilation effectively extracts this water vapour and odours. For installations that fall within the scope of Building Regulations the unit ventilation extract requirements are Kitchens 60l/s (30l/s with a cooker hood) and Utility rooms 30l/s. If the room does not have an opening window then a fan with a built in timer should be selected. This will continue to run for at least 15 minutes after the room has been vacated. Older properties present a different challenge. With generally larger rooms, higher ceilings but poorer insulation, the effects of condensation are often more obvious. Here, a better method of selecting a fan is based on room volume multiplied by air change. Domestic kitchens Utility rooms ach ach For kitchen canopies a speed selectable model with a high speed of over 450m 3 /h is often necessary to capture the heat and steam from a hob with four pans. For island installations this extract figure needs to be doubled. The extract point should always be positioned to capture water vapour and odours at source. With the exception of kitchen canopies, it should be located as high as possible and provide a flow across the room with air replacement usually coming from the doorway. Axial fans are suitable for through the wall or window fitting in most homes. For highrise and exposed (e.g. coastal) locations, centrifugal fans will cope better with gusty conditions. Centrifugal and mixed flow units have a better pressure characteristic, which makes them more suitable where a ducted solution is required. If there is a fuel burning appliance in the room, ensure that there is adequate air replacement for both the fuel burning appliance and the fan. In a kitchen, the right position will usually be an external wall or a window, but keep away from direct heat sources over 40ºC, such as an eye level grill. And don t forget the fan needs to be accessible for regular cleaning. Ventilation, working effectively, will pick airborne particles, which would otherwise deposit to your décor. 36

37 Kitchens NEW NEW NEW SL150/ SG150HP GX6 GX6/ GXC6 GX6 EC2 GXC9 DX400/ CF20/40T CF40 (UltraCV) Canopies Profile 60 CX10 CMF Page Number Fan Type Axial Axial Axial Axial Centrifugal Centrifugal Centrifugal Flat ducting Axial Centrifugal Positioning Wall Window Window Window Wall Wall Wall n/a Celing Ceiling / Wall / Wall / Wall Max extract rate n/a (m 3 /h) Duct dia (mm) 150 n/a n/a n/a w204 x h /150 Carbonlite For Domestic Sensors, Switches & Accessories see pages Kitchens

38 Xpelair Slimline SL150 & SG150HP Wafer thin axial fans NEW SL150 SG150HP Key features Type: Application: Control options: Legislation: Hole diameter: Excludes the SG150HP Axial extract fan with wafer thin grille Kitchens and utility rooms Pullcord, timer & humidistat Conforms to Building Regulations Part F1 150mm The Range Meet the new generation of Xpelair Slimline SL150 fans, with wall hugging wafer-thin grilles designed for modern living. They are white in colour and are ideal for utility rooms and other small rooms. With an internal projection of only 15mm (SG150HP 58mm), the 150mm Xpelair Slimline unit is one of the lowest profile fans available. Humidistat models are available for shower rooms and heavily used bathroom applications. Ordering is straight-forward: simply select the size and control option required, then add the appropriate window or wall kit (SG150HP comes with a window kit). But the Slimline range doesn t just have a pretty face, installation is simple too. All Slimline models have two adjustable QuickClamp fixings which make traditional wall plug and screw fixings a thing of the past (excluding the SG150HP). The IPX4 rated units fully meet the requirements of the Building Regulations for bathrooms, toilets and kitchens and the IP requirements for zone 1 and zone 2 as defined by the IEE Wiring Regulations (16th Edition) BS7671:2001. All models are suitable for a supply voltage of V 50Hz and ambient temperatures up to 40ºC. Wafer thin grille Select the right product for your application SG150HP with silent action electrothermo shutter cassette and external grille 38 SL150 SL150P SL150T SL150HT SL150HP SG150HP Reference number 91229AW 91230AW 92361AW 91231AW 91496AW 92349AW Remote switch (supplied separately) Integral pullcord Integral timer (adjustable up to 15 mins) * * Integral humidity sensor (45-99% RH) ** ** Extract performance (FID, m 3 /h) Extract performance (FID, l/s) Sound pressure level (db(a)@3m) Electrical power rating (W) IP rating IPX4 IPX4 IPX4 IPX4 IPX4 IPX2 Weight (kg) Guarantee (years, UK) * Adjustable upto 0-35 mins ** 50-80% RH

39 Models Controllers SL150 Ref AW Single speed axial fan Operated by a remote switch or sensor, usually a lighting circuit Built in backdraught shutter Colour: White SL150P Ref AW Single speed axial fan with pullcord Operated by integral On/Off pullcord switch Built in backdraught shutter Colour: White SL150T Ref AW Single speed axial fan with timer Timer triggered by remote switch-usually the lighting circuit Timer variable from 3-15mins Colour: White SL150HT Ref AW Single speed axial fan with humidistat and overrun timer Built in adjustable humidistat Integrated overrun timer eliminates nuisance tripping Timer variable from 3-15mins Built in backdraught shutter Colour: White SL150HP Ref AW Speed increases automatically as humidity increases Integral On/Off pullcord gives full speed override Built in backdraught shutter Colour: White SG150HP Ref AW Speed increases automatically as humidity increases Integral On/Off pullcord gives full speed manual override Built in backdraught shutter Colour: White Can be window mounted, and has a built in silent action electro-thermo shutter cassette, and an external grille Passive Infrared Sensor XPIRA Ref AA Activates fan via body movement Ideal for infrequently used public spaces Built in timer to prevent nuisance tripping Remote Time Controller DT20B Ref AW User adjustable run-on timer (2-20mins) Typical Specifications on page 164. Wiring Diagrams on page 182. Remote Sensor on page 56. Performance Installation and Accessories Wall Mounting Hole diameter: 157mm (SL150) Installation Accessories SL150 wall kit SLWK Ref AW Ceiling Mounting Window Mounting Hole diameter: 157mm (SL150) Hole diameter: 150mm (SL150) Installation Accessories Flexible ducting FD150 Ref AA Installation Accessories SL150 window kit* Ref AW * Backdraught shutter must be removed Dimensions (mm) SL150 Range SG150HP Ducted Applications Hole diameter: 157mm (SL150) Duct diameter: 150mm (SL150) Installation Accessories Flexible ducting FD150 Ref AA 39 Xpelair Slimline SL150 & SG150HP Wafer thin axial fans

40 Xpelair GX6, GXC6 & GXC9 Kitchen axial fans Key features Application: Control options: Legislation: Hole diameter: New longer ladder strips Domestic kitchens & utility rooms for wall or window mount Pullcord Timer Humidistat Conforms to Building Regulations Part F1 203mm (GX6/C6 wall) 184mm (GX6/C6 window) 266mm (GXC9 wall) 257mm (GXC9 window) Select the right product for your application The Range For over forty years the Xpelair GX series has remained the specifiers classic solution to domestic ventilation applications. Today s 5th generation of GX units remains in tune with the times. They retain their hallmark rugged reliability and styling, and the range has been expanded to include innovations for a range of specialist tasks. Now supplied with longer ladder strips. Xpelair GX models are purpose designed for use in domestic kitchens, utility rooms, large bathrooms and commercial applications such as small offices. They are highly efficient axial fans suitable for direct ventilation to the outside. Window, wall or panel mounting options are available using the universal mounting kit provided. All have a stylish white housing with integrated safety finger guard and silent shutter operation using an electro-thermal actuator (except GXC6 where it is pullcord operated). GXC models have an integral pullcord actuator. Timer and humidistat versions are also available along with multi-speed models. GXC6SC is also suitable for professional speed adjustment where there is a fuel burning appliance in the room. A trickle ventilation facility is available for background ventilation when not in use. Xpelair GX and GXC6 fans conform to Building Regulations mechanical ventilation for kitchens. They are designed for easy cleaning and maintenance, are BEAB approved and are rated as Class 1 earthed appliance. For larger kitchens, especially in older properties, a larger volume of air flow may be appropriate in order to achieve the recommended air change rates. For these applications the GXC9 may be more appropriate. Refer to the commercial ventilation section for more details on larger wall and window models. 40 GX6 GX6T GX6HT GX6HT2 GXC6 GXC6T GXC6SC GXC9 Reference number 90800AW 90812AW 90814AW 90863AW 90850AW 90861AW 91142AW 89995AW Integral electrothermal shutter Integral pullcord shutter Integral adjustable run-on timer (2 to 20 mins) Humidity sensor (50-90% RH) Speeds variable 1 Extract performance (FID, m 3 /h) high low Extract performance (FID, l/s) high low Sound pressure level (db(a)@3m) high low Electrical power rating (W) Hole diameter (mm) Hole diameter with wall liner (mm) * Weight (kg) Guarantee (years, UK) *for wall kit WK9/8, increase to 330mm for WK9/11

41 Models Controllers GX6 Ref AW Single speed extract fan Operated by remote switch or sensor (not supplied) GX6T Ref AW Single speed extract fan Integral run on timer (adjustable from 2-20mins) operated by lighting circuit GX6HT Ref AW Single speed extract fan Integral automatic humidistat operation adjustable between 50-90% RH Integral run-on timer operated by the lighting circuit Timer adjustable from 2-20mins GX6HT2 Ref AW Two speeds and humidistat or manual control selectable using an Xpelair TBS control (not supplied) Silent electrothermal shutter Automatic humidistat operation adjustable between 50-90% RH Integral run-on timer operated by room lighting circuit Timer adjustable from 2-20mins Performance GXC6 Ref AW Single speed extract fan Integral pullcord switches fan On and opens shutter GXC6T Ref AW Single speed extract fan Integral pullcord switches fan on and opens electrothermal shutter Pullcord off action actuates timer overrun (adjustable from 2-20mins) then closes shutter GXC6SC Ref AW Extract fan with adjustable speed control Integral pullcord switches fan On and opens shutter Built-in control allows performance to be set to suit room size or use Also suitable for professional speed adjustment where there is a fuel burning appliance in the room GXC9 features over the GX6 Ref AW Nine inch high performance extract axial flow ventilation unit As GX6 with integral pullcord Integral pullcord turns fan On and operates shutter Dimensions (mm) Timer and Boost Switch TBS Ref AW Switch 1: switches between humidity control and manual operation Switch 2: High-low speed Suitable for use with GXC6HT2 Remote Humidistat XRH Ref AW Stand alone humidistat switches fan On/Off when RH reaches pre-set levels Complete with pullcord override switch Suitable for use with GX6 Remote Time Controller DT20B Ref AW Provides continued ventilation run-on period after light has been switched Off User adjustable run on timer (2-20 mins) Passive Infrared Sensor XPIRA Ref AA Activates fan via body movement. Ideal for infrequently used public spaces. Built in timer to prevent nuisance tripping Suitable for use with GX6 Typical Specifications on page 164. Wiring Diagrams on page 183. Remote Sensors on page 56. Installation and Accessories GX6/GXC6 Wall Mounting Hole diameter: 203mm Installation Accessories Wall Kit 200mm Ref AA Wall Kit 280mm Ref AA Longer ladder strips* Ref AA Protective Wall Grille PG6 Ref AA GX6/GXC6 GX6/GXC6 Range GXC9 Range Dimensions (mm) Model A B C D E F ØG H J K GX6, GXC / GXC / Window Mounting Hole diameter: 184mm Installation Accessories Longer ladder strips* Ref AA For exposed applications such as coastal use RX6, RX9 See page 94 GXC9 Wall Mounting Hole diameter: 266mm Installation Accessories Wall Kit 200mm Ref AA Wall Kit 280mm Ref AA Longer ladder strips* Ref AA Protective Wall Grille PG9 Ref AA GXC9 Window Mounting Hole diameter: 257mm Installation Accessories Longer wall ladder strips* Length 508mm Ref AA *for walls/windows over 45mm thick, longer ladder strips are required (see page 91) 41 Xpelair GX6, GXC6 & GXC9 Kitchen axial fans

42 Xpelair GX6 EC2 & GXC6 EC2 Kitchen and Utility room axial fans with UltraEC technology Key features The Range Type: Application: Control options: Legislation: Energy efficient UltraEC axial Window / Wall fan with built in backdraft shutter. Intermittent ventilation in kitchens, utility rooms. 1 speed selectable on installation or 2 speeds with COS switch Conforms to Building Regulations Part F1 & Scottish Building Regulations for intermittent use in kitchens and utility rooms. The new Xpelair GX6 range with UltraEC technology - Energy efficient and long lasting. GX6 EC2 and GXC6 EC2 are designed with installer selectable settings to satisfy Part F1 installed performances for intermittent ventilation in kitchens or utility rooms. Window or panel installation uses a ladder strip and external grille fitted with a gasket to provide a seal to the mounting surface. For wall applications an additional wall sleeve assembly is recommended. Both models have a stylish white housing with integral safety finger guard; GX6 has a silent backdraft shutter operation using an electrothermal actuator; GXC6 shutter is pullcord operated. GX6 EC2 and GXC6 EC2 models feature UltraEC offering reduced energy use, a choice of installed performances and longer life than a conventional AC motor. For this reason Xpelair offers a 5 year UK only guarantee. Hole diameter: Window: 184mm Wall: 203 mm Select the right product for your application GX6 EC2 GXC6 EC2 Reference Number 92294AW 92295AW Longlife UltraEC motor Yes Yes Selectable speeds at installation 284m 3 /h = 10.6W 284m 3 /h = 7.9W 144m 3 /h = 7.1W 144m 3 /h = 3.4W Electric Power rating (W) Sound pressure level Integral electro-thermal shutter Yes Integral pullcord shutter Yes Hole diameter in window (mm) Hole diameter using wall kit (mm) Weight (kg) Guarantee (Years UK)

43 Models GX6 EC2 Ref AW Extract fan with two installed performance options: installer selected for Kitchens and Utility rooms Operated by remote switch (not supplied) 2 speed with COS Energy saving Longlife UltraEC external rotor motor with maintenance free sealed for life bearings and thermal overload protection Integral safety finger guard Integral mechanically operated louvred backdraft shutter with electrothermal actuator Inner grille and shutter cassette can be removed for easy cleaning Double insulated Performance Static Pressure in Pa Dimensions (mm) Installation and Accessories GXC6 EC2 Ref AW Extract fan with two installed performance options: installer selected for Kitchens and Utility rooms Built-in pullcord On-Off operation 2 speed with COS Energy saving Longlife UltraEC external rotor motor with maintenance free sealed for life bearings and thermal overload protection Integral safety finger guard Integral mechanically operated louvred backdraft shutter with pullcord On-Off actuator Inner grille and shutter cassette can be removed for easy cleaning Double insulated Flow rate in m 3 /h GX6/GXC6 EC2 Wall Mounting Hole diameter: 203mm Installation Accessories Wall Kit 200mm Ref AA Wall Kit 280mm Ref AA Longer ladder strips* Ref AA Protective Wall Grille PG6 Ref AA Dimensions (mm) A B C D E F ØG H J K / Typical Specifications on page 164. Wiring Diagrams on page 183. Domestic Accessories on page 56. GX6/GXC6 EC2 Window Mounting Hole diameter: 184mm Installation Accessories Longer ladder strips* Ref AA Low Speed High Speed *for walls/windows over 45mm thick, longer ladder strips are required 43 Xpelair GX6 EC2 & GXC6 EC2 Kitchen and Utility room axial fans with UltraEC technology

44 Xpelair Premier DX400 & CF40 Centrifugal extract and condensation control fans Key features The Range Application: Control options: Legislation: Hole diameter: Domestic kitchens, utility rooms and larger bathrooms; commercial bathroom, small offices and public toilets. Suitable for surface and floor, wall and ceiling mounting Pullcord, timer and humidistat Conforms to Building Regulations Part F1 117mm Select the right product for your application Kitchen ventilation has never looked so good. Since its launch, Premier has taken the ventilation market by storm. DX400 extract and CF40 condensation control fans are no exception. These pressure developing centrifugal fans are sleekly styled and are ideally suited for use in kitchens, utility rooms and larger bathrooms and toilets and individual offices. They can be surface or flush mounted in walls and ceilings using the universal mounting accessories provided, and include a back draught shutter and outlet grille. Both models have their inlet discreetly concealed behind a stylish white front cover. This cover is held in position by clips for easy removal for cleaning. Control options include integral pullcord and timer. Models with an integral humidistat offer automatic control. CF40TD features a delay start quick visit facility preventing the fan from coming on should the light be switched on and then off within 2 minutes. All models are IPX5 rated and BEAB approved. They are all suitable for V 50Hz mains operation and feature external rotor motors with integral balanced impellers, sealed for life maintenance free bearings and safety thermal cut out protection. Optional filter is available see page 57. DX400 DX400T DX400PC DX400RS CF40 CF40TD CF40RSTD Reference number 91083AW 91084AW 91100AW 91085AW 91086AW 91087AW 91088AW Remote switch (supplied separately) Remote switch (supplied) Integral pullcord Integral adjustable run-on timer (30s to 20 mins) Humidity sensor (50-90% RH) Quick visit facility (2 minutes) Speeds Trickle ventilation facility Extract performance (FID, m 3 /h) boost speed speed speed trickle Extract performance (FID, l/s) boost speed speed speed trickle Sound pressure level (db(a)@3m) boost speed speed speed trickle Electrical power rating (W) Hole diameter IP rating IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 IPX5 Weight (kg) Guarantee (years, UK)

45 Models Controllers Premier DX400 Ref AW Two speed centrifugal fan Pre-select speed to suit application Alternatively use optional COS switch to change between speeds and On/Off Includes external wall grille Premier DX400T Ref AW Centrifugal fan with timer Timer is typically connected to a lighting circuit Built in run-on period after the light has been switched Off, user adjustable from 30s-20min Fan operates at full speed when light is On, then operates at reduced speed during run-on and the switches to either Trickle or Off (installer selectable) QuickVisit delay feature prevents the fan from running should the light be switched On/Off again within two minutes Fan running status lights Includes external wall grille Premier DX400PC Ref AW High, Low, On/Off with tricklevent operated by integral 3 position pullcord switch Fan running status lights Includes external wall grille Premier DX400RS Ref AW Two speed centrifugal fan Pre-select speed to suit application Alternatively use optional COS switch to change between speeds and On/Off Trickle vent option is activated by a preset switch on the unit Performance DX400 Range Installation and Accessories Wall Mounting Hole diameter: 117mm Ducting size: 100mm Installation Accessories Easy fit kit EFT Wall Tube WD100 Ref AA Ref AA Fan running status lights Includes external wall grille Premier CF40 Ref AW Condensation Control Range with humidistat Automatic operation through integral humidity sensor Pullcord selects High, Low, Off or Trickle Premier CF40TD Ref AW Automatic operation through integral humidistat Pullcord selects High, Low, Off or Trickle QuickVisit delay feature prevents the fan from running should the light be switched On/Off again within two minutes Fan running status lights Includes external wall grille Premier CF40RSTD Ref AW Automatic operation through integral humidistat MOS remote switch (supplied) selects high or low speed and can switch the unit Off (or to tricklevent). Built in humidity control run on period User adjustable from 30sec-20min Fan running status lights Includes external wall grille Note: For kitchen applications a grease filter PDXGF is recommended Ref AA CF40 Range Ceiling Mounting Hole diameter: 117mm Ducting size: 100mm Installation Accessories Typical Specifications on page 165. Wiring Diagrams on page 183. Remote Sensors on page 56. Dimensions (mm) DX400/CF40 Range Ducted Applications Flat ducting XFP see Profile 60 Flexible ducting FD100 Ref AA Condensation trap XCT100 Ref AA Vent cowl VC10 Ref AA Ceiling mounting kit XCMK Ref AA Manual Override Switch MOS Ref AW Switch 1 controls the high/low speed levels and Switch 2 controls On/Off and the tricklevent option Change Over Switch COS Ref AW Used to select between high and low speed operation Remote Humidistat XRH Ref AW Stand alone humidistat switches fan On/Off when RH reaches pre-set levels. Complete with pullcord override switch Remote Time Controller DT20B Ref AW User adjustable run-on timer (2-20mins) Passive Infrared Sensor XPIRA Ref AA Activates fan via body movement Ideal for infrequently used public spaces Built in timer to prevent nuisance tripping Ø Spigot Ventilation Shaft Mounting Hole diameter: 117mm Ducting size: 100mm 45 Xpelair Premier DX400 and CF40 Centrifugal extract and condensation control fans

46 Xpelair Premier CF20/40T CV Centrifugal extract and condensation control fans NEW Key features The Range Type: Application: Control options: Legislation: Hole diameter: Constant Volume UltraEC Centrifugal extract fan Intermittent ventilation, Humidity controlled intermittent ventilation, Decentralised ventilation Installer selectable humidistat, timer and pullcord override Conforms to Building Regulations Part F1 115mm The Premier CF20/40T CV model features UltraEC technology offering reduced energy use, a choice of installed performances and a longer life than a conventional AC motor. The fan is designed to comply with the requirements of Part F1 to provide Intermittent Ventilation in Kitchens, Utility rooms, Bathrooms and Sanitary Rooms, Humidity Controlled intermittent Ventilation + manual override in Kitchens and Bathrooms, Intermittent Ventilation in Internal rooms and Decentralised Continuous Ventilation in Kitchens, Utility Rooms, Bathrooms and Sanitary Rooms. Performance is set at installation via a series of internal dip switches. The Constant Volume nature of the fan means that performance remains constant irrespective of the installed condition up to a system pressure of 100Pa. The fan can be surface or flush mounted in walls and ceilings using the universal mounting accessories provided. The fan is provided with a back draught shutter for intermittent applications. It is not to be fitted for the lower velocity continuous decentralised applications. Control options include integral Humidistat, pullcord over-ride, run on timer and 'quick visit' delay start facility. Xpelair offers a 5 year UK only guarantee. Select the right setting for your application At Zero Static Pressure* Speed Settings Extract Performance Noise 3m Power (W) Intermittent Ventilation l/s m 3 /h Kitchen 60l/s 216m 3 /h via integral pullcord W Utility 30l/s 108m 3 /h via integral pullcord W Bathroom 15l/s 54m 3 /h via integral pullcord W Sanitary Room 6l/s 22m 3 /h via remote switch (not supplied) W Humidity Controlled intermittent Ventilation + manual over-ride Kitchen 60l/s 216m 3 /h Off. Humidity. pullcord W Bathroom 15l/s 108m 3 /h 216m 3 /h Off. Humidity. pullcord W Intermittent Ventilation - Internal Rooms Kitchen 60l/s 216m 3 /h + 15min over-run timer triggered via light switch W Utility 60l/s 216m 3 /h + 15min over-run timer triggered via light switch W Bathroom 15l/s 54m 3 /h + 15min over-run timer triggered via light switch W Sanitary Room 15l/s 54m 3 /h + 15min over-run timer triggered via light switch W Decentralised Continuous Ventilation Kitchen 13l/s W Utility 8l/s W Bathroom 8l/s W Sanitary Room 6l/s W *Measured with 300mm of ducting and wall grille fitted on the outlet side. Note: As this is a constant volume product, as the back pressure on the system increases so the motor increases speed to maintain airflow. This has the effect of increasing motor input power. Product is rated at 230V, 50/60Hz, single phase. 46

47 Models Dimensions (mm) Premier CF20/40T CV Ref.92293AW Built in Humidistat controlled intermittent ventilation option Constant Volume centrifugal fan with speed selectable at installation by means of dip switches. UltraEC longlife low energy motor External rotor motor with integral balanced impellers, sealed for life maintenance free bearings and safety thermal cut out protection Fan maintains selected extract volume irrespective of system resistance up to 100Pa Performance Installation and Accessories Wall Mounting Hole diameter: 117mm Ducting size: 100mm Installation Accessories Easy fit kit EFT Wall Tube WD100 Ref AA Ref AA Built in timer controlled intermittent ventilation option for internal rooms Run on period of 20 sec-20min (installer adjustable) after light has been switched Off. Factory set at 15 min in compliance with Part F1 'Quick visit' feature prevents the fan coming on if the room is occupied for less than two minutes Includes external wall grille and fan backdraft shutter for intermittent applications Ceiling Mounting Hole diameter: 117mm Ducting size: 100mm Installation Accessories Typical Specifications on page 161. Wiring Diagrams on page 181. Remote Sensors on page 56. Ducted Applications Flat ducting XFP see Profile 60 Flexible ducting FD100 Ref AA Condensation trap XCT100 Ref AA Vent cowl VC10 Ref AA Ceiling mounting kit XCMK Ref AA Ventilation Shaft Mounting Hole diameter: 117mm Ducting size: 100mm 47 Xpelair Premier CF20/40T CV Centrifugal extract and condensation control fans

48 Xpelair Nouvelle Cuisine Kitchen canopies 90 Curved Key features The Range Models Type: Application: Control options: Legislation: Kitchen canopy Domestic kitchens Integral Conforms to Building Regulations Part F1 For many households the kitchen is the busiest room in the home. As well as an area for cooking, it is often the main focal point for family and guests. But with cooking odours, steam and condensation continually building up, keeping the kitchen fresh and pleasant is a constant problem. The Nouvelle Cuisine range of kitchen canopies is elegantly designed to suit every kitchen design and budget. Using powerful extraction and filters every model in the range will keep rooms free of steam and odour leaving behind a fresh and comfortable environment. Crafted from high quality materials such as stainless steel and glass and equipped with push button controls and built-in spotlights, the Nouvelle Cuisine kitchen canopies are a stylish addition to any kitchen. 90 Curved Ref AW Description: 90cm Curved Glass Canopy Finish: Stainless Steel and Glass Duct size: 125mm Features / Specification 90cm Curved Glass Canopy 3 speed levels Stainless steel finish Recirculation or extraction Maximum extraction rate 480m 3 /h Electronic touch control 200W motor Twin 50W halogen spotlights Aluminium grease filter Optional carbon filter system Dimensions Typical Specifications on page 165. Wiring Diagrams on page 183. With wall fix, island and built-in models available, the Nouvelle Cuisine range provides flexibility and choice for the perfect fit, practicality and ease of use. Splashbacks Reference number 91204AW 91205AW 91206AW 91207AW 91208AW Finish stainless steel stainless steel stainless steel stainless steel stainless steel Size (mm) w600 x h750 w700 x h750 w900 x h750 w1000 x h750 w1100 x h Curved Reference number 91202AW Freestanding Max extraction performance (l/s) 133 Sound pressure level* (db(a)) 39 Motor rating (W) 200 Speeds 3 Recirculation Extraction Duct size (mm) 125 No. grease filters 1 Grease filter type aluminium Built-in lighting 2 x 50W Maximum width (mm) 900 Finish stainless steel & glass Replacement filters 41834SK *at low speed 48

49 70 / 90 Box 90 Island 60 / 90 Flat Models 90 Island Ref AW Description: 90cm Island Glass Canopy Finish: Stainless Steel and Glass Duct size: 125mm 60 / 90 Flat Ref AW / Ref AW Description: 60/90cm Flat Glass Canopies Finish: Stainless Steel and Glass Duct size: 125mm 70 / 90 Box Ref AW / Ref AW Description: 70/90cm Box Canopies Finish: Stainless Steel Duct size: 125mm Features / Specification 90cm Island Glass Canopy 3 speed levels Stainless steel finish Recirculation or extraction Maximum extraction rate 851m 3 /h Electronic touch control 240W motor Four 50W halogen spotlights Aluminium grease filter Optional carbon filter system Dimensions (mm) Features / Specification 60/90cm Flat Glass Canopies 3 speed levels Stainless steel finish Recirculation or extraction Maximum extraction rate 480m 3 /h Electronic touch control 200W motor Twin 50W halogen spotlights Aluminium grease filter Optional carbon filter system * 60 Flat = 600mm 90 Flat = 900mm Features / Specification 70/90cm Box Canopies 3 speed levels Stainless steel finish Recirculation or extraction Maximum extraction rate 480m 3 /h Push button control panel 200W motor Built in twin lights Twin aluminium grease filters Optional carbon filter system * 70 Box = 700mm 90 Box = 900mm 90 Island 60 Flat 90 Flat 70 Box 90 Box 91203AW 91200AW 91201AW 91198AW 91199AW aluminium aluminium aluminium aluminium aluminium 4 x 50W 2 x 50W 2 x 50W 2 x 40W 2 x 40W stainless steel & glass stainless steel & glass stainless steel & glass stainless steel & glass stainless steel & glass 41834SK 41834SK 41834SK 41834SK 41834SK 49 Xpelair Nouvelle Cuisine Kitchen canopies

50 Xpelair Nouvelle Cuisine Kitchen canopies Tonda Chimney Inset Models 60 / 90 Tonda Ref AW / Ref AW Description: 60/90cm Tonda Canopies Finish: Stainless Steel Duct size: 125mm Features / Specification 60/90cm Tonda Canopies 3 speed levels Stainless steel finish Recirculation or extraction Maximum extraction rate 480m 3 /h Sliding control panel 200W motor Built in twin lights Twin aluminium grease filters Optional carbon filter system 60 / 90 Chimney Ref AW / Ref AW Description: 60/90cm Chimney Canopies Finish: Stainless Steel Duct size: 125mm Features / Specification 60/90cm Chimney Canopies 3 speed levels Stainless steel finish Recirculation or extraction Maximum extraction rate 480m 3 /h Push button control panel 200W motor Built in twin lights Twin aluminium grease filters Optional carbon filter system Inset Ref AW Description: 60cm Inset Canopy Colour: Silver Duct size: 125mm Features / Specification 60cm Inset Canopy 3 speed levels Available in silver finish Recirculation or extraction Maximum extraction rate 229m 3 /h Sliding control panel 140W motor Built in twin lights Carbon filter system Acrylic grease filter in metal grid casing Dimensions * 60 Tonda = 600mm 90 Tonda = 900mm * 60 Chimney = 600mm 90 Chimney = 900mm 60 Tonda 90 Tonda 60 Chimney 90 Chimney Inset Reference number 91196AW 91197AW 91194AW 91195AW 91192AW Freestanding Integrated Max extraction performance (l/s) Sound pressure level* (db(a)) Motor rating (W) Speeds Recirculation Extraction Duct size (mm) No. grease filters Grease filter type aluminium aluminium aluminium aluminium acrylic filter in metal casing Built-in lighting 2 x 40W 2 x 40W 2 x 40W 2 x 40W 2 x 40W Maximum width (mm) Finish stainless steel stainless steel stainless steel stainless steel silver Replacement filters 41834SK 41834SK 41834SK 41834SK 41832SK *at low speed 50

51 Standard Integrated Standard Plus Models Integrated Ref AW Description: 60cm Integrated Canopy Colour: Silver Duct size: 125mm Features / Specification 60cm Integrated Canopy 3 speed levels Available in silver finish Recirculation or extraction Maximum extraction rate 480m 3 /h Sliding control panel 125W motor Built in twin lights Metallic grease filter in aluminium grille Optional carbon filter system Dimensions (mm) Standard Ref AW - White Ref AB - Brown Description: 60cm Standard Canopy Colour: White or Brown Duct size: 125mm Features / Specification 60cm Standard Canopy 3 speed levels Available in white or brown finish Recirculation or extraction Maximum extraction rate 320m 3 /h Sliding control panel 125W motor Built in twin lights Additional carbon filter system Acrylic grease filter in metal grid casing Standard Plus Ref AW Description: 60cm Standard Plus Canopy Finish: Stainless Steel Duct size: 125mm Features / Specification 60cm Plus Canopy 3 speed levels Stainless steel finish Recirculation or extraction Maximum extraction rate 200m 3 /h Sliding control panel 125W motor Built in twin lights Twin aluminium grease filters Additional carbon filter system for recirculation only Integrated Standard Standard Standard Plus Reference number 91193AW 91189AW 91190AB 91191AW Freestanding Integrated Max extraction performance (l/s) Sound pressure level* (db(a)) Motor rating (W) Speeds Recirculation Extraction Duct size (mm) No. grease filters Grease filter type acrylic filter in metal casing acrylic filter in metal casing acrylic filter in metal casing aluminium Additional carbon filter system optional Built-in lighting 2 x 40W 2 x 40W 2 x 40W 2 x 40W Maximum width (mm) Finish silver white brown stainless steel Replacement filters 41833SK 41834SK 41834SK 41832SK *at low speed 51 Xpelair Nouvelle Cuisine Kitchen canopies

52 Xpelair Profile 60 Flat ducting system Key features The Range Type: Application: Size: Installation: Low profile flat plastic ducting Kitchen canopies & Premier range, particularly DX400 & CF x 60mm plastic Simple push fit & easily concealed Where space is limited for conventional duct systems, Xpelair Profile 60 provides an innovative solution to connect internally fitted extract units to the outside world. A common problem when fitting ductwork in the average kitchen is the lack of space left by large kitchen cupboards. The Profile 60 provides the ideal solution an adaptable, lightweight system that can be tailored to fit individual room layouts. Fast and easy to install, the clean white components of the system can be wall or ceiling mounted. It can be fitted between concrete floor slabs and plasterboards ceilings, as vertical risers in stud partitioning or under the floor. Profile 60 components are manufactured in flame retardant PVC conforming to DIN4102/B1.M1. The lightweight and easy to handle straight duct can be cut to length using a conventional cross cut saw and the system includes a full range of vertical and horizontal bends for easy installation. Quick-fit support clips hold the system in place and the whole system can be concealed behind plasterboard for discreet functionality. Profile 60 is designed to work with a number of kitchen canopies, wholehouse systems and extract systems to make up the complete ducting solution. Typical installation with Premier DX400 Typical kitchen canopy installation 52

53 Profile 60 Flat Plastic Ducting - w204 x h60mm Product Product Ref Description Dimensions (mm) Spigot Ø ID (mm) Ref. FPD100 Flat ducting, 1 metre length 204 x AA FPD150 Flat ducting, 1.5 metre length 204 x AA FPA Horizontal bend adjustable 204 x AA FPG Wall outlet grille 204 x AA FPP100 Elbow / Plenum box 204 x AA FPP125 Elbow / Plenum box 204 x AA FPP150 Elbow / Plenum box 204 x AA FPV90 Vertical 90º bend 204 x AA FPH90 Horizontal 90º bend 204 x AA FPB Mounting bracket (boxed in 5 s) 204 x AA FPC Coupling 204 x AA FPT T piece 204 x AA FPF Flexible ducting, 0.5m 204 x AA Dimensions (mm) Profile 60 Flat channel outer dimensions are w204 x h60mm and fit into system parts sockets. Cross section: 11200mm 2 Minimum space required for installation: w210 x h65mm PFB Intumescent type fire break 204 x AA PRA Round to rectangular adaptor 204 x AA Additional Accessories Acoustic Airbrick XAAB Ref AA Acoustic Airbrick XAABW with white grille Ref AA Acoustic Airbrick XAABB with brown grille Ref AA Acoustic Airbrick XAABC with Cotswold stone grille Ref AA Acoustic Airbrick XAABT with terracotta grille Ref AA Suitable for use adjacent to noise nuisance areas including roads, railways and airports Weighted Sound Reduction Index Rw BS EN ISO717-1:1997 = 7 Ceiling Kit XCMK Ref AA Use with ceiling mounted ducted products Complete with tube, rubber gasket and foam strip Condensation Trap XCT100 Ref AA For use with 100mm diameter ducting Prevents condensed water running back towards the fan in vertical PVCu ducted applications Collected water must be piped away to a convenient disposal point 20mm outlet Fire Damper XFC100 Ref AA Provides 1 hour fire check in either direction Can be mounted at any angle For ducts, walls and ceilings. Should not be fitted into flexible ducting. Wall or duct in which XFC is fitted should have a rated fire integrity in accordance with Building Regulations Part B 100mm Xflex FD100 Ref AA Wire helix flexible ducting 3m length Typical Specifications on page Xpelair Profile 60 Flat ducting system

54 Xpelair CX10 & CMF Ceiling mounted fans CX10 CMF Key features The Range Type: Application: Legislation: Hole diameter: Ceiling mounted axial and centrifugal fans Domestic kitchens, bathrooms and shower rooms Conforms to Building Regulations Part F1 300mm (CX10) 185sq (CMF171) 248sq (CMF241) 273sq (CMF271) Where wall space is tight or at a premium, fitting an extraction system drawing air from the ceiling is the convenient and secure solution. Whats more, ducted ceiling extract systems free you to position the unit for maximum benefit. Suitable for domestic kitchens, larger utility rooms and power shower rooms. Light commercial applications include customer waiting areas, changing rooms, payment and ticket kiosks, smoking rooms, office kitchens, storage rooms, small meeting rooms and offices. Commercial applications include pub bars, factories, schools and shops. Flush mounted, Xpelair CX10 and CMF units have a white finish to blend into the ceiling décor. Behind this neat fascia are efficient fan units, which connect directly to Xflex ductwork to exhaust to the outside. The CX10 units are axial fans and the CMF units are pressure developing centrifugal fans. In many commercial applications such as kiosks, retail clothing changing booths and copying rooms where heat build up is a problem it may be sufficient simply to dilute the air about the ceiling. The CX10 is especially suitable for dilution applications and short duct runs. CMF models are ideal for longer ducted extract systems. Shallow in depth, several models will fit between the ceiling of the room and the floor above. In many of these applications it is good practice to consider sensor control, operating automatically and only when necessary, saving energy. All models are suitable for high humidity applications and have an unobtrusive flush design with fingerguard protection. Lubricated for life motors, with maintenance free bearings and safety thermal overload protection are standard across the range. Select the right product for your application CX10 CMF171 CMF241 CMF271 Reference number 90209AB 89955AW 89956AW 89957AW Remote switch (not supplied) Extract performance (FID, m 3 /h) Extract performance (FID, l/s) Sound pressure level (db(a)@3m) Electrical power rating (W) Hole diameter (mm) x x x273 Ducting size (mm) Weight (kg) Guarantee (years, UK)

55 Models CX10 Ref AB Single speed axial flush mounted extract ceiling fan with stylish circular flush design. Unit comes complete with integral fingerguard and fly screen Lightweight two piece construction Moulded pre-balanced axial bladed impeller Suitable for steam and condensation applications Vertical spigot with 200mm diameter connection Operated by remote switch or sensor (not supplied) CMF 171 Ref AW CMF 241 Ref AW CMF 271 Ref AW Flush mounted extract ceiling fans High performance single speed centrifugal pressure developing motor/fan/scroll assemblies Stylish square grille design with integral finger-guard Lightweight two piece construction with horizontal spigot outlet Cassette design allows ducting to be installed prior to the fan itself Tip In situations where there is a tight closing bathroom or kitchen door, air circulation can be prevented. To remedy the situation fit a slimline air-grille in white (89529AA) or brown (89530AA) in door thicknesses up to 35mm. Typical Specifications on page 166. Wiring Diagrams on page 183. Remote Sensors on page 56. Performance Controllers CX10 Range CMF Range Remote Humidistat XRH Ref AW Stand alone humidistat switches fan On/Off when RH reaches pre-set levels. Complete with pullcord override switch Remote Time Controller DT20B Ref AW User adjustable run-on timer (2-20mins) Passive Infrared Sensor XPIRA Ref AA Activates fan via body movement. Ideal for infrequently used public spaces. Built in timer to prevent nuisance tripping Dimensions (mm) CX10 Installation and Accessories Please be aware that fan performance will be affected by the use of ducting, grilles and shutters. Termination Ducting Kit TDK8 Ref AA For use with CX10 Roof space ducting kit from fan to soffit board. Comprised flexible ducting, exterior grille, duct tie and fixings 2.5m duct length comprising 0.5m formed rectangular and 2m of 200mm diameter Grille dimensions 294 x 193mm CMF Range CX10 Ceiling Mounting Hole diameter: 300mm Ducting size: 200mm Installation Accessories Termination Ducting Kit TDK8 Ref AA Dimensions (mm) Model A B C D E CMF CMF CMF CMF Range Ceiling Mounting Hole diameter: Ducting size: 185 x 185mm (CMF171) 248 x 248mm (CMF241) 273 x 273mm (CMF271) 102mm (CMF171/241) 150mm (CMF271) Xpelair CX10 & CMF Ceiling mounted fans 55

56 Xpelair Domestic Sensors & Switches Remote Humidistat XRH Ref AW Automatically switches On when the relative humidity reaches an adjustable preset point and switches off when the relative humidity drops Pullcord override switch Fan indicator light Surface or recess mounting Suitable for ambient temperatures up to 40ºC Supply voltage V 50Hz Used with: Premier DX180, DX200, DX400, DX100, XIL, CMF, CX10, GX6 w160 x h86 x d45 mm LoVolt Remote Humidistat LVH Ref AW A 12V SELV LoVolt humidistat Automatically switches On when the relative humidity reaches an adjustable pre set point and switches Off when the relative humidity drops Pullcord override switch Fan indicator light Surface or recess mounting Suitable for ambient temperatures up to 40ºC Supply voltage 12V SELV Used with: Premier LoVolt DX200, LoVolt CF20, LoVolt DX100 w160 x h86 x d45 mm Time delay unit DT20B Ref AW Connected to a switching circuit such as a bathroom lighting Provides adjustable run on time delay after the light has been switched Off Time adjustable up to 20 minutes Surface or recess mounting Suitable for ambient temperature up to 40ºC Supply voltage V 50Hz Used with: Premier DX180, DX200, DX400, DX100, XIL, CMF, CX10, LoVolt DX100 w100 x h86 x d45 mm Change Over Switch COS Ref AW Used to select between high and low speed operation Surface or recess mounting Used with: DX400, DX400T, DX400RS w85 x h85mm Manual Override Switch MOS Ref AW Switch 1:high/low speed Switch2: On/Off (or Off/tricklevent according to fan option selected) Surface or recess mounting Used with: Premier DX200 and Premier DX400, DX400RS in conjunction with XRH Remote Humidistat. w85 x h85mm Passive Infrared Sensor XPIRA Ref AA For indoor use Automatically switches a fan on when body movement is detected Incorporates a delay timer Supply voltage V 50Hz Used with: Premier DX200, DX400, DX100, CMF, CX10, GX6 w86 x h86mm Timer and Boost Switch TBS Ref AW Provides switching between humidity control / manual operation Provides selection of high / low extract speed Surface or recess mounting Used with: GX6HT2 w85 x h85mm 56 Air Quality Sensor AQS Ref AW Provides fully automatic control Detects contaminants such as cigarette smoke, body odours, toilet odours and cooking smells Activates ventilation system when preset threshold level is exceeded Can control up to six fans and accessories Integral timer adjustable from 3-30 mins LED status indicator Surface or recess mounting Supply voltage V 50Hz w210 x h86 x d41mm

57 Xpelair Domestic Accessories Flexible Ducting Xflex FD Dia Length FD mm 3m Ref AA 6m Ref AA FD mm 3m Ref AA 6m Ref AA FD mm 3m Ref AA 6m Ref AA FD mm 3m Ref AA 6m Ref AA Glass fibre fabric on a PVC coated close pitch steel wire helix. 54 minute fire integrity from within as measured to BS 476:Part 20 - (1987) Can be interlocked and sealed with duct tape to form an airtight seal. Attached to spigots using worm drive clips Worm Drive Clips WDC WDC5 Ref AA Dia mm WDC8 Ref AA Dia mm For connection of flexible ducting to spigots Supplied in packs of 10 Thermal Flexible Ducting Xflex TFD Dia Length TFD mm 5m Ref AA 10m Ref AA TFD mm 5m Ref AA 10m Ref AA TFD mm 5m Ref AA 10m Ref AA TFD mm 5m Ref AA 10m Ref AA Double skinned insulated aluminium duct with high density fibreglass insulation to minimise condensation formulation 25 minute fire integrity from within as measured to BS 476: Part 20 - (1987) Can be interlocked and sealed with duct tape to form an airtight seal Premier Grease Filter PDXGF For Premier DX200 models Ref AA For Premier DX400 models Ref AA For Premier units in kitchen applications Fits behind the inlet Material: Self extinguishing black polyester foam New Aluminium Flexible Ducting Xflex ALU Dia Length ALU mm 10m Ref AA ALU mm 10m Ref AA ALU mm 10m Ref AA ALU mm 10m Ref AA Tough foil construction on a high strength wire helix Over 40 minute fire rating BS 476: Part 20 (1987) 100mm Wall Duct WD100 Ref AA For bridging cavities or lining solid exterior walls Mortared into position Used with: Premier DX200, CF20, Premier DX400, CF40 The premier models above come complete with external grille. Premier DX180 also requires wall grille Dia. 100mm Length 300mm 57 Xpelair Domestic Sensors, Switches & Accessories

58 Xpelair Domestic Accessories Fire Damper XFC XFC100 Dia. 100mm XFC125 Dia. 125mm XFC160 Dia. 150mm XFC200 Dia. 200mm Ref AA Ref AA Ref AA Ref AA For ducts, walls and ceilings. Should not be fitted into flexible ducting. Wall or duct in which XFC is fitted should have a rated fire integrity in accordance with Building Regulations Part B Provides full 1 hour fire check Closing temperature 72 O C Low temperature drop Tested at Warrington Fire Research Centre to BS476 Part 20 Vent Cowl VC10 Ref AA Provides weather protection for a 100mm PVCu rigid ducted outlet Pushfit and should be secured with solvent adhesive Material: PVCu Colour: Grey Used with: Premier DX180, DX200, DX400, DX100 axial models in exposed situations. Cowl diameter: 200mm wø201 x h101 x inner Ø110mm Glass Mounting Kits GMK & DXDG Premier glass mounting kit GMK Ref AA Used for installing Premier DX180, DX200 and CF20 models in a window Glass thickness: 4-28mm DX100 double/triple glazing kit DXDG Ref AA Allows DX100/LV100 to be mounted in double glazed panels from 6 to 46mm thick GX Wall Kit WK For GXC9 models Ref AA For GX6/GXC6 models Ref AA For bridging cavity walls or lining solid double brick walls Steel wall liner. Length 280mm Set of 508mm ladder strips Ø255mm Hole diameter: 267mm Condensation Trap XCT100 Ref AA For use with 100mm dia ducting Prevents condensed water running back down the duct towards the fan in vertical PVCu pipe ducted applications. (Not suitable for use in a flexible duct run) Collected water must be piped to a convenient disposal point Colour: Grey 20mm drain off point Material: PVCu Length: 85mm Easy-Fix Termination Kit EFT Ref AA Designed to be installed from inside a building through a cored out to Ø115mm (nominal) hole drilled in brickwork Easily cut to length Simple installation save times and cost Four sealing rings provide a watertight seal in the external wall Used with: Premier DX180, DX200, CF20. Not suitable for 100mm axial fans Length: 465mm Airbrick Adaptor XAA Ref AA A fabricated G.S.M 340mm sleeve to bridge a cavity and line a solid wall Connects to 100mm duct Includes an air brick GSM adaptor Used with all 100mm fans. w220 x h65 x d340 Ø100mm Spigot Plate SP100 Ref AA Connects a duct to the wall face 100mm spigot Material: Plastic Used with: All ducted 100mm fans. For larger diameter spigot plates see page 81 w180 x h180 x Ø96.5 Ceiling Kit XCMK Ref AA Allows a sealed ceiling mounting of ducted products Compete with ceiling adaptor tube 105.7m dia, rubber gasket and foam strip Used with: Premier DX180, DX200, DX400 58

59 Xpelair Domestic Accessories Wall Grille Gravity Shutter XXWG4 White Ref AW Grey Ref AA Protected duct outlet fitted with gravity flaps 100mm dia connection Dimensions: w155 x h155 x d15mm Wall Kit XXSWK4 Ref AW 100mm wall kit consists of wall duct, internal and external grilles foam strips and wall fixings Used with: XXS100 Wall hole dia. 117mm Wall Grille CFWG CFWG100 - Grey CFWG100 - White CFWG150 - Grey CFWG150 - White Ref AB Ref AW Ref AB Ref AW Surface mounted exterior wall outlet grille For use with 100mm / 150mm nominal size ducting Fixing screws provided Use with: 100mm axial variants. Dimensions: w150 x h150 x d13mm (CFWG100) w217 x h217 x d24mm (CFWG150) Wall Vent Kit VK10 Ref AW To bridge a cavity or line a solid wall hole Complete with wall duct (WD), 155mm square external back-draught shutter, foam strip and wall fixings Grille w155 x h155 Wall hole dia. 117mm Air Replacement Door Grilles DG-W DG-B DG-W White Ref AA DG-B Brown Ref AA Tight closing bathroom / toilet doors prevent air circulation to the fan. Air replacement grilles permit air to flow into the room with the door shut Slimline design Consists of two grilles and fixings Minimum door thickness 35mm Dimensions: w454 x h90mm overall w435 x h77mm hole Termination Ducting Kit WT WT10 100mm Ref AA WT15 150mm Ref AA For use in through wall applications, ducting can be terminated on the spigot Complete with exterior wall grille (CFWG), wall duct (WD), spigot plate (SP), fixing screws and plugs Wall hole dia. 117mm Slimline Wall Kit SLWK SL100 Wall Kit Ref AW SL150 Wall Kit Ref AW Wall kit consists of wall duct and external grille Used with: Slimline SL100 and SL150 Adjustable length mm Wall hole size SL mm SL mm Exterior Storm Cowl XXSCW XXSCB XXSCW White Ref AW XXSCB Brown Ref AB Provides protection against severe backdraughts and water ingress Fitted with gravity flap damper Wall mounted 100mm spigot Used with: 100mm axial fans. Slimline Window Kit SLGK SL100 Window Kit Ref AW SL150 Window Kit Ref AW* Window kit consists of internal housing and external grille box Used with: Slimline SL100 and SL150 * Backdraught shutter must be removed Window hole size SL mm SL mm 59 Xpelair Domestic Sensors, Switches & Accessories

60 Home systems It is estimated that we spend 90% of our time indoors and 70% of that time in our homes using heating, televisions, lighting and computers. It s hardly surprising then that 45% of the UK s carbon emissions are from buildings, 27% from homes and 18% from all other buildings - by far the nation s single largest source of CO 2 pollution. With the addition of perhaps 4 million new homes to the housing stock over the next 20 years, the energy needs of buildings are likely to grow faster than those of other sectors. So it is to the indoor environment that we need to look if we truly want to reduce our energy consumption. There are a number of Government initiatives intended to deliver savings in energy consumption of 20% over a ten year period. For example new Building Regulation Documents L & Part F1. Xpelair sees these real environmental issues as an opportunity and accepts that the scope for cost-effective energy efficiency improvement in the home is large and will continue to be created by innovation. Air tight buildings need controlled ventilation so the first in a our series of energy efficient products is a range of new Xpelair Xcell whole house heat recovery systems featuring the latest generation of contraflow heat recovery cells combined with long life, low energy use, DC motors. This DC technology is now also available in the new Xplus central extract system, the single room heat recovery unit and the EverDri range. To complement the whole house systems the range now also includes SystemX wholehouse ducting kits with self regulating intake and extract terminals designed to eliminate the need for system balancing on site. Xcell systems are not only good for the environment, they also reduce user heating costs, maintain a fresher home and lower humidity levels. This can provide important health benefits for many allergy sufferers. 60

61 Home Systems NEW NEW Xplus Xplus 250 & 400 Xcell Profile 150 System X EverDri XHR150 AutoFlow Page Number Type Mechanical Mechanical Mechanical System ducting Ducting system Positive Input Mechanical Passive Extract Extract Ventilation and Ventilation (PIV) Ventilation and Air-input Ventilation Ventilation Heat Recovery Heat Recovery (MEV) (MEV) (MVHR) (MVHR) Voltage Application Wholehouse Wholehouse Wholehouse Wholehouse Wholehouse Wholehouse Single room Thermostatic fresh air intake Models n/a n/a Max extract performance (m 3 /h) n/a n/a Duct dia (mm) n/a n/a 100/ /100/160 AC motor n/a n/a LoVolt n/a DC motor n/a n/a Speeds 3 Up to 8 Up to 12 n/a n/a 4 2 n/a Carbonlite n/a n/a All Xpelair ventilation products are designed to meet the good practice standard for energy efficient ventilation in dwellings. Xplus 340 and Xcell 270 are SAP Appendix Q listed. Both achieving Energy Saving Trust Best Practice performance levels as set out in GPG 268 Guide For Specifiers (2006 edition). The code for Sustainable Homes code level three is broadly similar to BRE s Eco Homes very good level and the EST Best Practice standard for energy efficiency. Code level 3 achieves a 25% minimum percentage reduction in dwelling emission rate over target emission rate calculated using SAP Home systems

62 Xpelair Xplus Multipoint ventilation units and UltraDC MEV models Xplus 275 Xplus 340 DC SAP Appendix Q listed to Best Practice Criteria Xplus 340 DC Key features The Range Type: Application: Control options: Legislation: Spigot diameter: Continuous mechanical extract unit (MEV) Wholehouse system 3 speed / 9 speed RF Building Regulations Part F1, Xplus 340 DC is SAP Appendix Q listed 125mm Higher density building requires new methods of ventilation. Apartments for example can often have only one external wall face, requiring ductwork to reach some rooms. Having one ventilation outlet is not only preferred aesthetically by architects it means less builder s work and minimises noise breakout. Suitable for domestic dwellings with a total internal volume up to 450m 3. Also suitable for a wide range of commercial applications where multiple extract points can be served by a single fan, for example toilet cubicles. The Xpelair Xplus range is the ideal solution for multipoint extract applications. Available in AC and now with UltraDC motors Xplus is easily installed in houses and flats. The Xplus range is a high pressure, quiet, speed controllable system designed for continuous 24/7 running ensuring that wet rooms are properly ventilated to minimise the migration of high humidity to other rooms. Used in conjunction with Xflex flexible ducting, Profile 29 flat ducting and RegulAir ventilation terminals, the system can be concealed above ceilings and in stud walls. All units are speed controllable by means of a three speed hard wired switch. Xplus 340 DC is also available with RF transmitter. The Xplus 340 is recognised by BRE for inclusion in SAP Appendix Q. Refer to for full details of how improved SAP ratings can be obtained. Select the right product for your application 62 Xplus 275 Xplus 340 Xplus 340 DC Xplus 340 DCRF Reference number 91260AW 91261AW 91262AW 91263AW ac motor UltraDC motor Radio frequency controls Speeds options 9 options Extract Performance (FID, m 3 /h) high med low Low sound pressure level (db(a)@3m) high Power (W) high med low No. of intake spigots Spigot diameter (mm) Colour black white white white Weight (kg) Guarantee (years, UK)

63 Models Xplus 275 Ref AW Multi-speed central extract unit Three 125mm diameter intake spigot connections and a 125mm diameter outlet Manufactured in high impact ABS External rotor motor / impeller Moulded high performance scroll Integral fixing points Suitable for temperatures up to 40ºC Terminal box for electrical connection Black finish Three Speed Controller Ref AA 3 speed control switch suitable for Xplus 275 and 340 models Xplus 340 Ref AW Higher performance three speed central extract unit Three 125mm diameter intake spigot connections and a 125mm diameter outlet Manufactured in high impact polypropylene External rotor motor/impeller Moulded high performance scroll Integral fixing points with key hole slots Suitable for temperatures up to 40ºC Fitted with 1 meter of five core flex White finish Xplus 340 DC Ref AW As Xplus 340 Incorporates UltraDC long life motor Xplus 340 DCRF Ref AW Includes Wireless control system Three speed wireless control unit (100 meter range) consisting of wall mounted transmitter powered by CR2430 battery and mains receiver fitted into the fan unit Stylish slim wall switch with led Optional 9 speeds from which 3 speeds can be selected 10mins manual timer option on speed setting three 30mins manual timer option on speed setting three Range 100m LOS Performance Dimensions (mm) Typical Specifications on page 166. Wiring Diagrams on page 183. Xplus 275 Xplus 340 Xplus 340 DCRF / Xplus 340 DC Xplus Xplus 340 RF Controller Ref AA 63 Xpelair Xplus Multipoint ventilation units and UltraDC MEV models

64 Xpelair Xplus250 & 400 DC 8CV Continuous extract MEV unit with UltraDC technology NEW Xplus UltraDC SAP Appendix Q listed to Best Practice Criteria Xplus250 DC 8CV Key features Type: Application: Control options: Legislation: UltraDC extract MEV units. Two models, choice of 8 extract performances to offer trickle and boost Multipoint extract unit for continuous extract ventilation from kitchen, utility room, bathrooms and toilet Boost operation from additional external switch or Xpelair active response sensors Conforms to Building Regulations Part F1 and Scottish Building Regulations. Continuous mechanical extract ventilation (MEV). Xplus 250 DC 8CV is SAP Appendix Q listed Select the right product for your application The Range Two NEW Xpelair Xplus Multispeed models with Self-commissioning UltraDC technology. Energy efficient and long lasting. Xpelair Xplus UltraDC is designed with installer selectable settings to satisfy Part F1 installed performances for continuous ventilation in domestic dwellings. The trickle speed is selectable at installation, based on the sum of the continuous extract rate requirements from table 1.1a of Part F1. Xplus offers self-commissioning centrifugal performance with an UltraDC motor. The installer selects the performance required - Xplus selects the speed necessary to meet the performance based on the system resistance. This ensures a constant extract performance and lower energy use than AC equivalents. Three 125mm input spigots are provided for connection to Xpelair Xflex ducting. Xpelair Y pieces can be used for further branch ducts. 125mm RegulAir ceiling spigots with RegulAir factory set extract grilles ensure the correct extract rate from bathrooms and toilets without system balancing. A louvred grille with filtered inlet is used in the kitchen. The built-in BOOST option allows the installer to select advanced sensors: active response humidity control, adjustable overrun timer, passive infrared sensor or Air Quality Sensor to provide BOOST override. Xplus can be surface mounted at any angle in a cupboard or loft. Xpelair UltraDC motors reduce energy consumption and last longer than conventional AC motors. For this reason Xpelair offers a 5 year UK only guarantee. Xplus250 DC 8CV Xplus400 DC 8CV Reference number AW 92100AW Ultra DC Longlife motor Yes Yes Self-Commissioning Yes Yes Selectable installed performances / Watts /db(a)@3m l/s W* db(a) l/s W* db(a) Boost override speed Increases performance by one speed. Outlet spigot Ø Ø125mm Ø125mm Inlet spigots 125mm 3 3 Colour black black Weight (kg) Guarantee (years, UK) 5 5 *Measured in typical applications comprising 1m ducting of each inlet, 3m ducting and an outlet grille fitted on outlet side. 64

65 Models Xplus250 DC 8CV Ref AW Multipoint extract unit designed for 8 continuous trickle speeds up to 64 l/s or boost operation - one speed higher Three 125mm diameter inlet spigots and one 125mm diameter outlet spigot Casing in high impact black ABS Integral fixing points Energy saving long life UltraDC motor Selectable installed continuous extract speeds to satisfy Part F1 requirements (table 1.1a) Self-commissioning motor sets fan speed to meet performance requirement Maintenance free external rotor motor with greased for life ball bearings and thermal overload protection. Suitable for duct air temperatures up to 40ºC Performance Xplus400 DC Static Pressure in Pa Xplus250 DC Static Pressure in Pa Centrifugal backward curved impeller dynamically balanced to G6.3 ISO 1940 Surface wall ceiling or loft mounting As a Constant volume product maximum motor input power is rated at 97W Xplus400 DC 8CV Ref AW Multipoint extract unit designed for 8 continuous trickle speeds up to 108 l/s or boost operation - one speed higher Three 125mm diameter inlet spigots and one 125mm diameter outlet spigot Casing in high impact black ABS Integral fixing points Energy saving long life UltraDC motor Flow rate in m 3 /h Flow rate in m 3 /h Selectable installed continuous extract speeds to satisfy Part F1 requirements (table 1.1a) Self - commissioning motor sets fan speed to meet performance requirement Maintenance free external rotor motor with greased for life ball bearings and thermal overload protection. Suitable for duct air temperatures up to 40ºC Centrifugal backward curved impeller dynamically balanced to G6.3 ISO 1940 Surface wall ceiling or loft mounting As a Constant volume product maximum motor input power is rated at 140W Typical Specifications on page 166. Wiring Diagrams on page 184. Dimensions (mm) 205 Speed 1 Speed 2 Speed 3 Speed 4 Speed 1 Speed 2 Speed 3 Speed 4 Speed 5 Speed 6 Speed 7 Speed 8 Speed 5 Speed 6 Speed 7 Speed Xpelair Xplus250 & 400 DC 8CV Continuous extract MEV unit with UltraDC technology

66 Xpelair Xcell 150 Low Profile Hideaway heat recovery unit MVHR NEW Xcell 150 Xcell 150V Key features Type: Application: Continuous mechanical supply and extract with heat recovery MVHR Wholehouse system Control options: 2 speeds from 4 Legislation: Spigot diameter: Building Regulations Part F1 125mm dia. or Profile 60 ductwork The Range Designed for the smaller dwelling the New Xpelair Xcell 150 is a slimline unit designed for horizontal or vertical installation where space is at a premium. It is ideal for recessed fitting in ceilings, in a coat cupboard or in lofts with limited space. Xcell 150V is a vertical version with all spigots on top of the unit, making it particularly suitable for installation in kitchen cupboards. Fitted with one of the most efficient heat recovery cells available, the Xcell 150 has multispeed fans which can be set according to the volume of the home, and a compact antibacterial condensate drain system. Xcell 150R is fitted with system-side Profile 60 multi spigots for direct connection to Xpelair flat ducting. Select the right product for your application Xcell 150 internal Xcell 150V internal 66 Xcell 150 Xcell 150R Xcell 150V Reference number 91981AA 91976AA 92004AA Max house volume (m 3 ) Room side spigots circular rectangular circular House side spigot size (mm) Ø x 60 Ø125 External spigot size (mm) Ø x 60 Ø125 Efficiency (%) No. speeds Performance (m 3 /h) Max sound pressure (db(a)@3m) high low Power (W) high low Roof space fitment Horizontal installation Vertical installation Weight (kg) Guarantee (years) 3 3 3

67 Models Controllers Xpelair Xcell 150 Ref AA Slimline insulated steel case with sealed access panel. Suitable for ceiling or loft mounting in confined spaces High efficiency counterflow heat recovery cell with up to 92% efficiency depending on volume setting Multispeed single inlet centrifugal fans for whisper quiet performance. Speeds are selected at installation based on the required volume/duty of the dwelling in accordance with Building Regulation Part F1 A remotely fitted low/boost switch is provided with the unit Hygenic anti-bacterial condensate tray and outlet Fitted with 125mm spigots 6mm wire frame with EU 2 media panel Condensate rates: Typical=0.4 l/h, max=0.8 l/h Xpelair Xcell 150R Ref AA As Xcell 150 Fitted with four flat duct spigots for connection to Profile 60 duct Xpelair Xcell 150V Ref AA As Xcell 150 Designed for vertical installation with all spigots on top of unit Options: Anti-vibration pads for loft mounting Included as standard The wall mounted single gang controller is fitted remotely in a convenient position for the user to select trickle or boost speed. The speeds are selected at installation from the 4 available according to the duty requirements of the dwelling Typical Specifications on page 167. Wiring Diagrams on page 184. Performance Dimensions (mm) Xcell 150 Xcell 150R 204x60 SPIGOTS Xcell 150V HORIZONTAL UNITS VERTICAL UNIT DRAIN POSITIONS 67 Xpelair Xcell 150 Low Profile Hideaway heat recovery unit MVHR

68 Xpelair Xcell 200 Low Profile Hideaway heat recovery unit NEW Key features Type: Application: Mechanical ventilation with heat recovery Wholehouse system Control options: 2 speed from 4 Legislation: Spigot diameter: Building Regulations Part F1, BRE Digest 398 (1994) 150mm or profile 60 ductwork The Range Designed for the smaller dwelling the New Xpelair Xcell 200 is ideal for recessed fitting in ceilings in a coat cupboard, or in lofts with limited space. Fitted with one of the most efficient heat recovery cells available, the Xcell 200 has multispeed fans which can be set according to the volume of the home, and a compact antibacterial condensate drain system. Xcell 200R is fitted with system-side Profile 60 multi spigots for direct connection to Xpelair flat ducting. Versions with a motorised summer 100% bypass are available. These use cool summer evening air to give free cooling when the outside air temperature is lower than indoors. The Slimline unit is designed for horizontal installation where space is at a premium. An easy access cover allows top or bottom access for inspection of the filters. Options include: An electric or hot water heater maintains a constant input air temperature irrespective of the outside conditions. Select the right product for your application Xcell 200 Xcell 200R Xcell 200BP Xcell 200RBP Reference number 91977AA 91978AA 91979AA 91980AA Max house volume (m 3 ) Room side spigots circular rectangular circular rectangular House side spigot size (mm) Ø x 60 Ø x 60 External spigot size (mm) Ø x 60 Ø x 60 Summer by-pass Efficiency (%) No. speeds Performance (m 3 /h) Max static pressure (Pa) high Max sound pressure (db(a)@3m) high low Power (W) high low Roof space fitment Weight (kg) Guarantee (years)

69 Models Controllers Xcell 200 Ref AA Slimline insulated steel case with sealed access panel. Suitable for ceiling or loft mounting in confined spaces High efficiency counterflow heat recovery cell with up to 92% efficiency depending on volume setting Multi-speed double inlet centrifugal fans for whisper quiet performance. Speeds are selected at installation based on the required volume/duty of the dwelling in accordance with Building Regulations Part F1. A remotely fitted low/boost switch is provided with the unit Xcell filters Hygenic anti-bacterial condensate tray and outlet 150mm diameter circular spigots Cardboard frame with EU 4 pleated media panel Performance Condensate rates: Typical=0.65 l/h, max=1.3 l/h Xcell 200R Ref AA As Xcell 200 except for rectangular roomside spigots suitable for Profile 60 ducting Xcell 200BP Ref AA As Xcell 200 Plus built in motorised summer by-pass Xcell 200RBP Ref AA As Xcell 200R Plus built in motorised summer by-pass Included as standard The wall mounted single gang controller is fitted remotely in a convenient position for the user to select trickle or boost speed. The speeds are selected at installation from the 4 available according to the duty requirements of the dwelling Typical Specifications on page 167. Wiring Diagrams on page 184. Dimensions (mm) Installation and Accessories Must be carried out by a competent person and in accordance with appropriate Building and Wiring Regulations. The ductwork is normally installed at the first fix stage of the building process. Typically, circular Profile 150 insulated duct is fitted to draw air from the bathroom and en-suite(s) upstairs.the kitchen ceiling vent and cloakroom are served by Profile 60 ducts concealed in the first floor studwork. The 90% efficient heat recovery cell is fitted with a condensate tray and outlet pipe which is connected to the household waste system. Xpelair RegulAir inlets provide the chosen volume for the room with an unrestricted filtered grille fitted in the kitchen. On the input side similar ductwork supply air to diffusers installed in the bedrooms and lounge or hall. Boost speed can be selected by means of a manual switch sensor. RegulAir exhaust valves can be selected with built in humidistat or timers. 69 Xpelair Xcell 200 Low Profile Hideaway heat recovery unit

70 Xpelair Xcell 270 DC wholehouse heat recovery unit NEW SAP Appendix Q listed to Best Practice Criteria Key features Type: Application: Mechanical ventilation with heat recovery Wholehouse system Control options: 3 speeds from 12 Legislation: Spigot diameter: Building Regulations Part F1, SAP Appendix Q, Energy Saving Trust Best Practice 150mm Xcell 270 internal filters Select the right product for your application The Range New building regulations are striving to improve energy efficiency in the home and reduce CO 2 emissions. Part L places greater emphasis on airtightness in new homes to reduce the energy loss through uncontrolled air leakage, so the need for an intelligent controlled ventilation strategy is becoming more critical. Wholehouse ventilation with heat recovery, is often referred to as MVHR. It provides a constant background flow of fresh tempered air to the living spaces of a tight home whilst extracting condensation, smells, tobacco smoke and volatile organic compounds via kitchens, bathrooms, utility rooms and toilets. The resultant lower humidity deprives the house dustmite the conditions in which to breed, thus contributing to a healthier environment. The Xpelair Xcell 270 is one of a new breed of high efficiency MVHR units designed to save energy and function reliably with extremely low running costs. It maintains a cosy indoor environment during the colder months and provides an aired feeling even when the building has been closed up for long periods. The Xpelair cell is housed in an insulated cabinet and integral filters are designed to make access to the cell unnecessary - keeping maintenance to a minimum. Xpelair UltraDC fan units not only ensure a low running cost but they are also much more efficient than ac motors - keeping energy usage down. A choice of ten preset performance programmes enables flexible control over air quality and when combined with a manual switch or automatic sensor, the ventilation rate can be increased temporarily to reduce humidity - perfect for bath and shower rooms. Fitted with a fan failsafe interlink, if one fan is stopped, the other will automatically switch off - particularly important in homes with open fires or unvented boilers. Housed in a stylish cabinet, the Xcell 270 can be unobtrusively mounted in an airing cupboard, on a kitchen wall or within a roof space. 70 Xcell270 Xcell270BP Reference number 91264AW 91265AW Max house volume (m 3 ) Summer bypass UltraDC motor Efficiency (%) Speeds selected during installation 3 3 Typical Performance (m 3 h) high med low Max static pressure (Pa) high Max sound pressure (db(a)@1m) high medium low Power (W) high low Wall mounting Roof space fitment Spigot diameter (mm) Colour beige beige Weight (kg) Guarantee (years, UK) 5 5

71 Models Controllers Xcell 270 Whole House Mechanical Ventilation and Heat Recovery (MVHR) unit Ref AW Wall hanging bracket provided Steel powder coated cabinet Beige finish High density foam insulated cabinet lining/scroll construction with built in double sided condensate tray with choice of drain positions Polymeric, robotically assembled heat recovery cell with bonded seals to eliminate cross air leakage ContraFlow cell design providing heat recovery efficiently up to 95% (Independent TZWL laboratory tests) Two stage 1 G4 filters, which are removable for easy cleaning Hinged access door for access to the cell and filters 3 speeds from 12 available (via on board dip switches to suit dwelling volume) or low with switched higher speed. Factory set at the three most popular outlet settings Motors are UltraDC, maintenance free with sealed for life bearings The integrated electronic control system ensures equal constant outputs from both sides of the ducted resistances of the unit XFFI system automatically switches both fans off if one fan fails to rotate Complete with pre-wired connection cable Xcell 270BP with Summer Bypass Ref AW All the features of Xcell 270 plus a built in summer by pass which diverts the incoming air directly into the dwelling without passing through the heat exchange cell During hot periods this ensures that comparatively cooler incoming fresh air is not further heated by warmer air exhausted from the dwelling This is particularly useful on summer evening when the outside temperature falls faster than that inside Three speed selector switch Ref AW Three speed selector switch for low (night-time), medium (daytime) and high (boost setting) Dimensions w81 x h152 x d62mm Typical Specifications on page 167. Wiring Diagrams on page 185. Performance Dimensions (mm) Installation and Accessories Installation must be carried out by a competent person and in accordance with appropriate Building and Wiring Regulations. The ductwork is normally installed at the first fix stage of the building process. Typically, circular Profile 150 insulated duct is fitted to draw air from the bathroom and en-suite(s) upstairs.the kitchen ceiling vent and cloakroom are served by Profile 60 ducts concealed in the first floor studwork. The 90% efficient heat recovery cell is fitted with a condensate tray and outlet pipe which is connected to the household waste system. Xpelair RegulAir inlets provide the chosen volume for the room with an unrestricted filtered grille fitted in the kitchen. On the input side similar ductwork supply air to diffusers installed in the bedrooms and lounge or hall. Boost speed can be selected by means of a manual switch sensor. RegulAir exhaust valves can be selected with built in humidistat or timers. 95% average efficiency Energy efficiency is achieved using the Xcell 95% efficient ContraFlow heat exchange cell which transfers heat from the extracted air and preheats the incoming flow ensuring a fresher, drier, tempered atmosphere. A - Exhaust air (into unit) B - Fresh air (into unit) C - Supply air (from unit) D - Exhaust air (from unit) Schematic diagram of a typical wholehouse MVHR installation 71 Xpelair Xcell 270 DC wholehouse heat recovery unit

72 Xpelair Xcell 300 & 400 DC wholehouse heat recovery units Key features Type: Application: Control options: Legislation: Mechanical ventilation with heat recovery Wholehouse system 3 speed Building Regulations Part F1 Spigot diameter: 150mm (Xcell 300) 180mm (Xcell 400) The Range Meeting improved energy efficiency requirements for new homes combines efficient heating, insulation, better air tightness and a controlled ventilation strategy. An integrated, new generation, high efficiency wholehouse heat recovery system is by far the most efficient ventilation solution for new tight buildings. A 90% efficient wholehouse heat recovery unit for larger properties. The Xpelair Xcell 300 and 400 are ideal for larger properties in order to meet Part F1 requirements. As the extract points are in the wet rooms bathrooms, en-suites, cloakroom and kitchen, the air change rates in these individual rooms will be substantially higher. At the heart of the unit is a 90% efficient heat recovery cell which transfers the heat from the outgoing exhaust airflow to the incoming fresh air whilst keeping the two flows separated. As the temperature of the outgoing air drops, it reaches dew point and gives up condensate. The warming process to the incoming air reduces it s RH ensuring a fresh, condensation free indoor environment. The unit features UltraDC motors designed for continuous operation and exceptionally low running costs. The unit design allows the outlet spigots to be set vertically or horizontally to suit site conditions. The unit is fitted with two cell pre-filters which are user accessible from the outside and without having to isolate the unit. Easy access Replacement filters Spigots can be repositioned Select the right product for your application Xcell 300 Xcell 300BP Xcell 400 Xcell 400BP Reference number 91267AW 91268AW 91269AW 91270AW Max house volume (m 3 ) Summer bypass UltraDC motor Efficiency (%) Speeds selected during installation Typical performance (m 3 h) high med low Max static pressure (Pa) high Max sound pressure (db(a)@3m) high Power (W) high low Roof space fitment Spigot diameter (mm) Colour white white white white Weight (kg) Guarantee (years, UK)

73 Models Controllers Xcell 300 Ref AW 300m 3 /h MVHR Unit at 200Pa 90% efficient heat transfer cell Corrosion resistant aluminium construction Automatic defrost protection Longlife low noise backward curved DC motor/impeller sets Integral condensate drain and pipe Vertical and horizontal option separately at all spigots 150mm spigots accept Xflex TFD insulated duct or Profile 150 duct Neon function indicator Two user accessible G3 cell pre filters that are washable Polypropylene casing, fire retardant to class B1/B2 Cold bridging free Internal acoustic insulation Finished in RAL 9002 White Fitted with flying lead Performance Dimensions (mm) Xcell 300/400 Installation and Accessories Installation must be carried out by a competent person and in accordance with appropriate Building and Wiring Regulations. The ductwork is normally installed at the first fix stage of the building process. Typically, circular Profile 150 insulated duct is fitted to draw air from the bathroom and en-suite(s) upstairs. The kitchen ceiling vent and cloakroom are served by Profile 60 ducts concealed in the first floor studwork. The 90% efficient heat recovery cell is fitted with a condensate tray and outlet pipe which Xcell 400 Ref AW Features over the Xcell m 3 /h MVHR unit at 150Pa 180mm spigots accepts Xflex TFD insulted Test data Efficiency independently tested to NEN 5138 by TZWL. Efficiency 91% with an energy usage of 47W Summer bypass Xcell 300BP Ref AW Summer bypass Xcell 400BP Ref AW Features over the Xcell 300/400 Units with factory fitted summer bypass are available to special order. Includes automatic control which opens bypass when the outside temperature is over 15ºC and the inside temperature is over 20ºC is connected to the household waste system. Xpelair RegulAir inlets provide the chosen volume for the room with an unrestricted filtered grille fitted in the kitchen. On the input side similar ductwork supply air to diffusers installed in the bedrooms, lounge and living room. Boost speed can be selected by means of a manual switch sensor. RegulAir exhaust valves can be selected with built in humidistat or timers. Three Speed Controller Ref AA 3 speed selector switch for low (night-time), medium (daytime) and high (boost setting) Typical Specifications on page 167. Wiring Diagrams on page 185. Electrical characteristics Xcell 300 Volume Pst(Pa) Amps Watts Electrical characteristics Xcell 400 Volume Pst(Pa) Amps Watts A - Exhaust air from house B - Fresh air from outside C - Supply air to dwelling D - Exhaust air to outside Schematic diagram of a typical wholehouse MVHR installation 73 Xpelair Xcell 300 & 400 LongLife DC wholehouse heat recovery units

74 Xpelair Xcell 600 Low Profile Hideaway heat recovery unit NEW Key features The Range Type: Application: Control options: Legislation: Spigot diameter: Mechanical ventilation with heat recovery Wholehouse system 2 speed from 6 available Building Regulations Part F1 200mm Designed for the larger property, the New Xpelair Xcell 600 provides high performance and excellent heat recovery efficiency. Xcell 600 is Xpelair s largest wholehouse heat recovery unit, suitable for large domestic applications. Also suitable for commercial installation. Xcell 600 features multi-speed fans chosen for their quiet operation an proven reliability. The heat recovery cell is a high efficiency design having a typical energy recovery rate of 70%. The unit is fitted with two heavy duty filters, and an anti-bacterial stainless steel outlet on condensate tray. The assembly is housed in a commercial quality case lined with non hygroscopic thermal/acoustic insulation complying with London Borough and CAA airport authority flammability and toxicity requirements. Xcell 600BP has a built-in motorised summer 100% bypass. This uses cool summer evening air to give free cooling when the outside air temperature is lower than indoors. A remotely positioned speed selector is provided with the unit. Select the right product for your application Xcell 600 Xcell 600BP Reference number 92002AA 92003AA Max house volume (m 3 ) Room side spigots circular circular House side spigot size (mm) Ø200 Ø200 External spigot size (mm) Ø200 Ø200 Summer by-pass Efficiency (%) No. speeds 6 6 Performance (m 3 /h) Max static pressure (Pa) high Max sound pressure (db(a)@3m) high low Power (W) high low Roof space fitment Weight (kg) Guarantee (years)

75 Models Controllers Xcell 600 Ref AA Slimline insulated steel case with sealed access panel. Suitable for ceiling or loft mounting High efficiency crossflow heat recovery cell with up to 70% efficiency depending on volume setting Multispeed double inlet centrifugal fans for whisper quiet performance. Speeds are selected at installation based on the required volume/duty of the dwelling in accordance with Building Regulations Part F1. A remotely fitted low/boost switch is provided with the unit Xcell filters Hygenic anti-bacterial condensate tray and outlet 200mm diameter circular spigots Cardboard frame with EU 4 pleated media panel Performance Condensate rates: Typical=1.2 l/h, max=2.4 l/h Xcell 600BP Ref AA As Xcell 600 Plus built in motorised summer by-pass Typical Specifications on page 168. Wiring Diagrams on page 185. Included as standard The wall mounted single gang controller is fitted remotely in a convenient position for the user to select trickle or boost speed. The speeds are selected at installation according to the duty requirements of the dwelling Dimensions (mm) Installation and Accessories Must be carried out by a competent person and in accordance with appropriate Building and Wiring Regulations. The ductwork is normally installed at the first fix stage of the building process. Typically, circular Profile 150 insulated duct is fitted to draw air from the bathroom and en-suite(s) upstairs.the kitchen ceiling vent and cloakroom are served by Profile 60 ducts concealed in the first floor studwork. The 70% efficient heat recovery cell is fitted with a condensate tray and outlet pipe which is connected to the household waste system. Xpelair RegulAir inlets provide the chosen volume for the room with an unrestricted filtered grille fitted in the kitchen. Speed 1 Speed 2 Speed 3 Speed 4 Speed 5 Speed 6 On the input side similar ductwork supply air to diffusers installed in the bedrooms and lounge or hall. Boost speed can be selected by means of a manual switch sensor. RegulAir exhaust valves can be selected with built in humidistat or timers. 75 Xpelair Xcell 600 Low Profile Hideaway heat recovery unit

76 Xpelair Profile 150 Heat recovery duct systems Key features The Range Type: Application: Duct Diameter: Ducting system Mechanical ventilation with heat recovery 150mm An efficient wholehouse heat recovery system is only as good as the duct work that serves it. Reclaimed warmth can be lost before the air reaches the living spaces through poorly insulated ductwork. Xpelair Profile 150 ideally compliments the Xpelair Xcell range of Mechanical Ventilation with Heat Recovery (MVHR) units. Designed for quick, easy and mess free installation in domestic and commercial applications. Suitable for use in unheated spaces. Appropriate lengths are cut using a cross-cut saw or knife, and using the collars, pushed together to build a system that is well insulated and very robust. Where the system is connected to a terminal spigot or where periodic inspection is necessary, SnapClamp collars engage tightly or release completely in seconds allowing fast fitting and release as necessary. A range of matching cowled terminations is available. The thick but flexible foam system is lightweight, fire retardant and slim in profile. Straight ducts are supplied in 2.5m lengths and a full range of collar fit bends are available. Fast and easy fitting 76

77 Models Profile 150 System Lightweight insulated ducting system in convenient 2.5m lengths with little wastage Material: vapour resistant EPE. Self extinguishing Class BI, DIN4102 Density: 50kg/m 3 Heat transfer coefficient 0,040 W/m 2 at 0ºC in accordance with DIN Temperature range -40 to +100ºC Attenuates sound Ductwork lengths are sufficiently flexible to get through awkward openings Full range of bends available Colour anthracite See also: two way splitters and roof terminations Profile 150 Components Straight Duct Ref AA Length 2.5m i/d 150mm o/d 180mm 90º Bend Ref AA 45º Bend Ref AA 30º Bend Ref AA 15º Bend Ref AA Pushfit Collar Ref AA Simple push fit Centre stop Collar length 10mm Y Piece Splitters 100 x 100 x 150mm Ref AA 125 x 125 x 150mm Ref AA 150 x 150 x 150mm Ref AA 150 x 150 x 200mm Ref AA Roof Cowl Ref AA Outlet cowl complete with flashing For roof pitch 25-45º Insulated, self extinguishing EPS Colour: black 160mm diameter (135mm not including foam lining) SnapClamp Duct Collar Ref AA Used where Profile 150 ducts need to be disconnected from an MVHR unit for servicing or cleaning. Overcentre clamp fits firmly when engaged Performance Resistance at 225m 3 /h Component Resistance (Pa) Roof cowl as outlet 1.9 Roof cowl as intake Wall cowl as intake Duct per metre º bend º bend º bend 0.4 Typical Specifications on page 168. Wall Cowl Ref AA Weather protected wall cowl Ideal for exposed locations Manufactured in PVC Colour: brown Schematic diagram of a typical wholehouse MVHR installation 77 Xpelair Profile 150 Heat recovery duct systems

78 Xpelair SystemX Wholehouse heat recovery ducting kits Photograph highlights some of the components in System X Key features Type: Application: Ducting system Mechanical ventilation with heat recovery Schematic diagram of a typical wholehouse MVHR installation System X Kits The Range Xpelair Xcell wholehouse heat recovery units feature over 90% heat transfer efficiencies and low running cost LongLife dc motors. To ensure that as much of this valuable heat energy gain is delivered back to the living areas, Xpelair has developed two SystemX kits which contain all the main ductwork components needed for a standard three or four bedroom two level new home. Kit 3 is suitable for a typical 3 bedroom home and Kit 4 is suitable for a typical 4 bedroom home. Not only does this simplify the specification but the kits offer substantial savings over the cost of the individual components. The systems are based on a low pressure drop design, aiming to keep the air paths as large as possible and providing the main resistance at the inlets and outlets. The kits consist of Profile 150 and Xflex TFD components for ducting in uninsulated cold areas such as the loft, Profile 60 components for vertical risers in stud walls and other vertical voids, and splitters and RegulAir intake and outlet terminations for wet rooms and living areas. Site conditions will inevitably mean that a few components more or less will be required to complete the project. Choose these from the accessory list. SystemX components are delivered in a series of easy to handle master cartons with first fix items separate from the second fit fixing and grilles. Because of the grease content, it is recommended that kitchen canopies are not connected to the system. Instead, use a separate extract point at ceiling level. Xpelair SystemX Kit 3 Ref AA Layout assumptions: Xcell unit in the airing cupboard on first floor Exhaust from family bathroom and one ensuite on first floor, kitchen general vent and cloak room on ground floor Intake to three bedrooms on first floor and hall or lounge on ground floor 2 external terminations are required but not included. Use either roof cowl or wall termination set Comprises: First fix 5x 2.5m Profile 150 straight duct 2x Profile o bend 2x Pushfit collar 4x SnapClamp collar 1x 150x150x150 Y splitter 3x 150x125x125 Y splitter 2x 125x125x125 Y splitter 1x 10m Xflex TFD125 26x Worm drive clip 13x Profile 60 flat duct 6x Profile 60 plenum box 9x Profile 60 coupling 3x Profile 60 vertical 90 o bend 1x Profile 60 T piece 1x Profile 60 adjustable horizontal bend 26x Profile 60 mounting bracket 11x RegulAir ceiling spigot Second fix 2x Kitchen / utility extract grille 4x RegulAir XEI 125 input grille 1x RegulAir XEP x RegulAir XEH x RegulAir XEV 8 valve Roof cowl Ref AA Profile 150 roof cowl 2 off required to complete installation Wall termination set Ref AA Required to complete installation: 2x 150mm Wall duct WD 2x Wall grille 2x Profile º bend 2x 2.5m Profile 150 straight duct 2x Pushfit collar 78

79 Xpelair SystemX Kit 4 Ref AA Layout assumptions: Xcell unit in the airing cupboard on first floor Exhaust from family bathroom and two ensuites on first floor, kitchen general vent and cloak room on ground floor Intake to four bedrooms on first floor and hall and lounge on ground floor 2 external terminations are required but not included. Use either roof cowl or wall termination set Comprises: First fix 8x 2.5m Profile 150 straight duct 2x Profile o bend 2x Pushfit collar 4x SnapClamp collar 3x 150x150x150 Y splitter 5x 150x125x125 Y splitter 3x 125x125x125 Y splitter 1x 10m Xflex TFD125 38x Worm drive clip 17x Profile 60 flat duct 9x Profile 60 plenum box 12x Profile 60 coupling 4x Profile 60 vertical 90 o bend 1x Profile 60 T piece 1x Profile 60 adjustable horizontal bend 34x Profile 60 mounting bracket 12x RegulAir ceiling spigot Second fix 1x Kitchen / utility extract grille 1x RegulAir XEP x RegulAir XEI 125 input grille 1x RegulAir XEP x RegulAir XEH x RegulAir XEV 8 valve Roof cowl Ref AA Profile 150 roof cowl 2 off required to complete installation Wall termination set Ref AA Required to complete installation: 2x 150mm wall duct WD 2x Wall grille 2x Profile º bend 2x 2.5m Profile 150 straight duct 2x Pushfit collar Extract and Input Grilles Extract Grilles For use in en-suites, bathrooms, kitchens and utility rooms. Input Grilles For use in bedrooms, hall and living rooms etc RegulAir ceiling spigot Ref: 91452AA A 125mm first fix spigot that fits flush to the ceiling, allowing decoration without masking Self supporting - no fixings required Complete with rubber seal RegulAir Exhaust grilles Factory set to the exhaust volume requirement for a room. No site balancing is necessary and the performance cannot be tampered with after insulation Pushed into the 125mm ceiling adaptor after decorating is complete as part of the second fix. Additional fixings not necessary Complete with rubber seal RegulAir XEE 8-16 bathroom/utility Ref: 91442AA Preset volume regulator. 8l/s trickle ventilation Electric damper opens to 16l/s XEK Kitchen / Utility Room extract grille Ref: 91454AA A 125mm frame with removable grille/filter. At least one XEK grille must be used in the system to maintain balanced extract / intake Ceiling Spigot and regulator intake RegulAir XEP 8-16 bathroom/utility Ref: 91444AA Preset volume regulator. 8l/s trickle ventilation Pullcord opens to 16l/s RegulAir XEH 8-16 bathroom/utility Ref: 91445AA Preset volume regulator. 8l/s trickle ventilation Non electric humidistat opens to 16l/s RegulAir XEP 6-12 sanitary accommodation Ref: 91443AA Preset volume regulator. 6l/s trickle ventilation Pullcord opens to 12l/s RegulAir XEV 6-12 sanitary accommodation Ref: 91446AA Preset volume regulator. 6l/s trickle ventilation PIR opens to 12l/s RegulAir XEI 125 input grille Ref: 91451AA Hinged diffuser 125 with a distribution pattern allowing installation in the corner of the room 125mm diameter to fit into RegulAir ceiling adaptor Also available in 100mm dia RegulAir XEI 100 input grille Ref:91450AA RegulAir XEV induct constant airflow valve. Duct mounted regulator maintains a constant return flow volume to bedrooms etc. fits 125mm Profile 150 or Xflex duct XEV4 4l/s Ref: 91447AA XEV8 8l/s Ref: 91448AA XEV12 12l/s Ref: 91449AA Important One of the return ducts should not be fitted with a constant airflow valve to maintain balance extract / intake. This is normally one of the returns to the ground floor. 79 Xpelair SystemX Wholehouse heat recovery ducting kits

80 Xpelair SystemX Accessories Spigot Plates SP Fixes to inside of exterior wall 100mm spigot diameter SP100 Ref AA 125mm spigot diameter SP125 Ref AA 150mm spigot diameter SP150 Ref AA 200mm spigot diameter SP200 Ref AA 250mm spigot diameter SP250 Ref AA 315mm spigot diameter SP315 Ref AA Wall Ducts WD For bridging cavities or lining solid exterior walls 100mm duct diameter WD100 Ref AA 125mm duct diameter WD125 Ref AA 150mm duct diameter WD150 Ref AA 200mm duct diameter WD200 Ref AA 250mm duct diameter WD250 Ref AA 315mm duct diameter WD315 Ref AA Louvred Wall Grille White Dia LGW mm Ref AA NEW Louvred Wall Grille Brown Dia LGB mm Ref AA Circular Air Valves CAV Dia CAV mm Ref AA CAV mm Ref AA CAV mm Ref AA Valve has adjustable centre disc For use with XID100, XID125 and XID150 Flexible ducting (FD) can be terminated at the valve Circular Air Valve with Fire Damper Dia CAV125FD 125mm Ref AA Valve includes built in fire damper for use in kitchens Valve has adjustable centre disc and can be used as outlet for XID125 and Xplus Tested to BS476 Part 20 - provides 1 hour fire check 80

81 Xpelair SystemX Accessories Insulated Circular Plastic Ducts Dia Length CPD mm 2m Ref AA CPD mm 2m Ref AA Insulated Circular T-pieces Dia ICT mm Ref AA ICT mm Ref AA Insulated Circular Plastic 45º Bends Dia CPE mm Ref AA Insulated Circular Plastic 90º Bends Dia CPB mm Ref AA CPB mm Ref AA Circular Plastic Connectors Dia CPC mm Ref AA CPC mm Ref AA Circular Plastic Adaptors Dia CPA125/ mm Ref AA CPA150/ mm Ref AA CPA200/ mm Ref AA 81 Xpelair SystemX Accessories

82 Xpelair EverDri LongLife UltraDC DC positive pressure ventilation Key features Type: Application: Legislation: Hole diameter: Positive input ventilation Wholehouse unit Building Regulations Part F1 210mm Select the right product for your application The Range The effects of the moisture created by everyday living can quickly lead to the deterioration of the fabric of a building. Cooking, washing, showering and breathing all create water vapour up to two gallons for a family of four per day. Without a home being able to breathe, this moisture has nowhere to go. Mould growth on cooler surfaces like window frames and in unventilated spaces such as the back of wardrobes not only looks bad, it can be bad for your health too. The EverDri system is based on a continuous supply of fresh, dry air into the home. This creates a slight positive pressure which forces moisture and contaminant laden air out through natural leakage points in the building. The LongLife low energy DC motor contained in the system is permanently XEDL switched on and automatically temperature regulated to ensure continual air quality. The units are designed to meet Public Sector and refurbishment sector requirements for positive pressure ventilation. Quick and easy to install. Normally installed in a matter of hours, the units can quickly provide benefits to the entire dwelling. UltraDC motor means that very low running costs can be achieved while maintaining outstanding efficiency. The EverDri system is ideal for existing properties, particularly those with brick walls without a cavity or insulation and with low or intermittent heating periods. Reference number 90998AA Loft spacing installation Wall mounted Ducted Integral electric heater Supply Performance (m 3 /h) Supply Performance (l/s) Power (W) Guarantee (years, UK) 5 82

83 Models Xpelair XEDL Ref AA For installation in houses Installed in the roof space and ducted to a neat diffuser which is fitted to the ceiling, usually over the stairwell The unit draws dry air from the loft space taking advantage of solar gain which tempers the air The UltraDC motor is extremely efficient providing very low running costs. The air is filtered and gently introduced through the ceiling diffuser Controllers Built-in Controls Once the unit has been installed to one of the four extraction rates appropriate to the volume of dwelling there is no need to change any setting. The unit will automatically optimise performance according to temperature Typical Specifications on page 168. Wiring Diagrams on page 185. Dimensions (mm) Installation XEDL *Maximum dimensions 295 x 295mm Air Circulation XEDL - Loft unit installed in a house Standard loft installation (XEDL with Diffuser) 83 Xpelair EverDri LongLife UltraDC DC positive pressure ventilation

84 Xpelair LoVolt XHR150 Single room heat recovery ventilator Key features The Range Type: Application: Control options: Legislation: Hole diameter: Mechanical ventilation with heat recovery Single room Pullcord/Humidistat Building Regulations Part F1 150mm In existing buildings, single room heat recovery ventilators can be quicker and less disruptive to fit than ducted wholehouse heat recovery systems. Xpelair LoVolt XHR 150 units can be installed quickly using a standard core drill. Suitable for domestic applications in bathrooms, utility rooms, bedrooms and living rooms. Also suitable for commercial applications such as hotels, offices and meeting rooms. Xpelair LoVolt XHR150 is the energy efficient alternative to extract ventilation. It is an effective remedy for damp problems associated with household condensation. The two speed unit removes moist air from the room, which then passes through a heat recovery cell, giving up it s heat to the incoming air flow. As it is warmed, the RH reduces dramatically, providing a flow of dry air which in turn acts as a sponge to soak up further moisture in the room. Intake is fixed at less than the extract rate to ensure a slight negative pressure on the room, so that moist air does not migrate to the rest of the dwelling. XHR150 is more energy efficient than normal fans both in terms of heating and fan running costs. It also complies with current Building Regulations. Select the right product for your application XHR150PC XHR150HP Reference number 90821AA 90820AA Integral pullcord Automatic control from remote humidistat Maximum efficiency (%) Speeds 2 2 Extract performance (m 3 /h) boost trickle Extract Performance (l/s) boost 9 9 trickle 3 3 Sound pressure level (db(a)@3m) boost trickle Power (W) boost trickle 9 9 Hole diameter (mm) Wall thickness range (mm) Guarantee (years, UK)

85 Models LoVolt XHR150 range Effective solution for condensation problems in individual rooms Suitable for solid and cavity walls mm thick Easy installation - a 152mm hole can be drilled in minutes using a core cutter, the unit is then simply slid into place and fixed into position On trickle mode, the unit is whisper quiet. At boost speed it is a mere 41dB(A) The tamper proof design ensures it works constantly against the effects of condensation At the heart of the unit is an efficient aluminium heat recovery cell combined with LoVolt motor assembly for complete safety, especially in the splash zones of bathrooms and showers A separate 12V SELV transformer is supplied with the unit. This is installed outside of splash zones 1 and 2 At most times the unit will idle at trickle speed LoVolt XHR150PC Ref AA Two speed trickle and pullcord boost operation SELV safety LoVolt motor operation with separate SELV transformer Tubular construction with integral air intake/outlet and wall bezel Aluminium heat exchange cell Fascia with built in filters LoVolt XHR150HP Ref AA Built in pullcord override switch for On / Off operation SELV safety LoVolt motor operation with separate SELV transformer Tubular construction with integral air intake/outlet and wall bezel Aluminium heat exchange cell Fascia with built in filters Remote adjustable set point type humidity sensor automatically switches to boost when a higher %RH is detected from showering etc... Integral light sensor to prevent misuse operation at night Typical Specifications on page 169. Wiring Diagrams on page 185. Dimensions (mm) XHR Range Installation and Accessories Wall Mounting Hole diameter: 152mm The XHR150 range comes complete with a universal mounting kit for installing through the wall. 85 Xpelair LoVolt XHR150 Single room heat recovery ventilator

86 Xpelair AutoFlow Passive air-input units Key features Type: Application: Control options: Legislation: Passive ventilation All rooms Thermostatic Building Regulations Part F1 Hole diameter: 85mm (AutoFlow 80) 105mm (AutoFlow 100) 165mm (AutoFlow 160) The Range Building refurbishment with replacement double glazing can often lead to condensation problems if there is inadequate ventilation. With central systems, be it central extract using multipoint system or a positive pressure system, it is often now necessary to provide passive ventilators in tight rooms. Introducing Xpelair AutoFlow, a simple and neat passive ventilation unit designed for installation at high level through a wall using a core cutter. Xpelair AutoFlow is self regulating and adjusts the airflow in relation to the outside temperature. A self contained, temperature sensitive thermostatic piston controls the opening of the indoor vent disc. In automatic operation the aperture decreases with declining outdoor temperature and increase with rising outdoor temperature. The unit comes complete with wall tube and outside weather protected wall grille. Diagram showing how AutoFlow opens with increasing temperature Select the right product for your application AutoFlow 80 AutoFlow 100 AutoFlow 160 Reference number 91295AW 91296AW 91297AW Operating temperature range (ºC) -5/+10-5/+10-5/+10 Maximum vent opening (mm) Maximum ventilation rate (m 3 /h) Pressure drop at max flow rate (Pa) Diameter (mm) Hole diameter (mm) Guarantee (years, UK)

87 Models AutoFlow 80 Ref AW Self regulating passive 80mm ventilator that adjusts airflow with outside temperature Building Regulations compliant Maintenance free temperature sensitive actuating piston Volume (C.M.F.) Range 5ºC to +10ºC Fitted using a standard core cutter ABS front face with sound attenuating insulation to the reverse side Telescopic wall tube for walls to 270mm Outside weather protected wall grille Finish in white AutoFlow 100 Ref AW Self regulating passive 100mm ventilator that adjusts airflow with outside temperature Building Regulations compliant Maintenance free temperature sensitive actuating piston Range 5ºC to +10ºC Fitted using a standard core cutter ABS front face with sound attenuating insulation to the reverse side Telescopic wall tube for walls to 270mm Outside weather protected wall grille Finish in white AutoFlow 160 Ref AW Self regulating passive 160mm ventilator that adjusts airflow with outside temperature Building Regulations compliant Maintenance free temperature sensitive actuating piston Range 5ºC to +10ºC Fitted using a standard core cutter ABS front face with sound attenuating insulation to the reverse side Telescopic wall tube for walls to 270mm Outside weather protected wall grille Finish in white Typical Specifications on page 169. Performance AutoFlow 80 Volume (C.M.F.) AutoFlow 100 AutoFlow 160 Thermostat bulb operation Dimensions (mm) Dimensions (mm) Model A B C D AutoFlow AutoFlow AutoFlow Xpelair AutoFlow Passive air-input units

88 Commercial Ventilation Why unit ventilation? When it comes to air quality, there is nowhere more important than the workplace. At home the environment in which we live is largely within our control. At work the air we breathe and our thermal comfort is provided by others. Small wonder then that a World Health Organisation report suggests that up to 30% of new and refurbished buildings may be subject to excessive complaints relating to indoor air quality. The symptoms include headaches, eye, nose and throat irritation, dry coughs, dizziness and nausea, difficulty concentrating, fatigue and sensitivity to odours. Since the 1970 s as energy costs have risen, so buildings have become more airtight and in many cases the amount of recirculated fresh air has been reduced in order to improve energy efficiency. These reduced rates have been found to be, in many cases, inadequate to maintain the comfort and health of building occupants. Frequently, problems result when the occupants activities are different from that which the building was originally intended. Central systems can, in some cases, be energy wasteful as they ventilate all areas whether they are occupied or not. Studies have also shown that we react better to a varying air circulation than a carefully controlled consistent environment. The ability to control our own air space to suit the activity or the number of people reduces the symptoms often referred to as sick building syndrome. In retail and the hospitality sector, employers have an additional duty of care towards their staff with regard to passive smoking. Satisfactory air quality and thermal comfort is not just good for employee health, it s good for business too. Localised heat, smells and moisture can be effectively removed with extract fans installed as close to the source as possible. In staff rooms, photocopying rooms, toilets etc. usually a window or wall fan can be extremely effective. In general office environments 4-6 air changes per hour is sufficient to provide circulation and remove volatile organic compounds from furnishings, cleaning agents and biological contaminants. Unit ventilation can effectively extract tobacco smoke although specific provision of tempered air to the staff is recommended. 88

89 Commercial Ventilation GX PX RX WX WXXL ChefX Page Number Fan Type Axial Axial Axial Axial Axial Kitchen Canopies Positioning Window / Wall Ceiling / Panel Roof Wall Wall Over hob Models Max extract performance (m 3 /h) Max intake performance (m 3 /h) n/a Max power (W) Duct dia (mm) n/a n/a n/a n/a See product For Commercial Sensors, Switches & Accessories see pages Commercial Ventilation

90 Xpelair GX6, GX9 & GX12 Commercial window fans Key features Type: Application: Control options: Legislation: Hole diameter: Commercial duty ventilation unit Pubs, restaurants, offices, kitchens, factories, schools and shops Extensive range of optional controllers available Conforms to Building Regulations Part F1 184mm (GX6 window) 257mm (GX9 window) 324mm (GX12 window) 203mm (GX6 wall) 266mm (GX9 wall) 330mm (GX12 wall) Select the right product for your application The Range Tried and tested, the Xpelair GX6, GX9 and GX12 window fans have remained a byword for commercial window fans for over forty years. The latest GX range is no exception continuing that reputation for rugged reliability, whilst introducing a host of refinements to make the range safer, faster to install and easier to clean. Now supplied with longer ladder strips. The contoured high gloss white housing is styled to blend in cleanly with modern décor. A shadow grey external grille is supplied for unobtrusive external appearance. For safety, a finger guard is integrated into the housing and the window grille design. On GX9 & GX12 range units, a tamper proof positive plug and socket assembly provides a means of isolation for service access without the safety risk of accidental disconnection. Installation in single and sealed double glazed windows (up to 25mm) is rapid using Xpelair s unique metal ladder strip / screw system, ensuring a secure and watertight seal against the glass. Both the GX9 & GX12 ranges are reversible and now feature totally enclosed external rotor motors providing constant volume outputs, even in gusty external conditions. Prebalanced sickle bladed impellers eliminate fan judder and ensure quiet trouble free operation. Sealed for life maintenance free bearings ensure suitability for running at any angle. Running costs are impressively low, and when not in use the silent electrothermal shutter cassette closes silently against backdraughts. And cleaning has never been easier. The housing, shutter cassette and impeller are all removed in seconds. GX6 GX9 GX12 Reference number 90800AW 89994AW 90012AW Remote switch (supplied separately) Selectable intake, extract or controller operation Speeds 1 2* 2* Extract performance (FID, m 3 /h) high low Extract performance (FID, l/s) high low Intake performance (FID, m 3 /h) high low Intake performance (FID, l/s) high low Sound pressure level (db(a)@3m) high low Max. electrical power rating (W) Hole diameter (mm) Hole diameter with wall liner (mm) Weight (kg) Guarantee (years, UK) *low speed only applies if fan used with FR22/30 controller. If controller not used fan is only single (high) speed 90

91 Models GX6 Ref AW 6 high performance extract axial ventilation unit Operated by remote On/Off switch (not supplied) Suitable for single and sealed double glazing windows and panels up to 25mm Sealed for life maintenance free bearings, suitable for running at any angle. Integrated safety thermal overload protection Built-in silent action electro-thermal shutter cassette Passive tricklevent facility for background ventilation with fan Off Easy clean high gloss ABS housing with integral finger safety guard Shadow grey external grille for unobtrusive external appearance Unique metal ladderstrip / screw connection to external grille for security and weather tight seal IPX4 rated motor Typical Specifications on page 169. Wiring Diagrams on page 186. Controller Details on page 102. GX9 with sickle blade Ref AW GX12 with sickle blade Ref AW High performance intake/extract axial ventilation unit Choice of optional controllers Suitable for single and sealed double glazing windows and panels up to 25mm Balanced external rotor motor and sickle blade impeller for quiet efficiency Sealed for life maintenance free bearings, suitable for running at any angle Built-in silent action electro-thermal shutter cassette Passive tricklevent facility for background ventilation with fan Off Easy clean high gloss ABS housing with integral finger safety guard Shadow grey external grille for unobtrusive external appearance Tamperproof internal connection safety plug and socket Unique metal ladderstrip / screw connection to external grille for security and weather tight seal IPX4 rated motor Controllers Single Fan Controller FR22/30 Ref AW For use with GX9 and GX12 On/Off control with neon indicator. Used to select between high and low speed, intake and extract Group Fan Controller EC6H Ref AW For use with GX9 and GX12 On/Off control with neon indicator. Infinitely variable speed selection controls extract and intake air flow. For use with up to four fans (not mixed sizes) Group Fan Controller XCC1 Ref AW For use with GX9 and GX12 On/Off control with neon indicator Performance Installation and Accessories Dimensions (mm) The GX6, GX9 & GX12 ranges come complete with a universal mounting kit for window installations. GX6 Wall Mounting Hole diameter: 203mm Installation Accessories Wall Kit 280mm Ref AA Window Mounting Hole diameter: GX6 Wall Mounting Hole diameter: 266mm (GX9) 330mm (GX12) Installation Accessories Wall Kit Ref AA (GX9) Wall Kit Ref AA (GX12) GX9, GX12 Dimensions (mm) Model A B C D E F G H J K GX / GX / GX / mm (GX6) 257mm (GX9) 324mm (GX12) GX9/GX12 GX9 unit can be used for a variety of medical and photographic applications where light protection is required by replacing the external grille with a Darkroom Cowl. Darkroom installation Installation Accessories Darkroom Cowl DC9 Ref AK 91 Xpelair GX6, GX9 & GX12 Commercial window fans

92 Xpelair PX6, PX9 & PX12 Commercial ceiling fans Key features Type: Application: Control options: Legislation Hole diameter: Commercial duty ceiling and panel mount axial ventilation unit Kitchens, restaurants, pubs, offices, schools, shops and kiosks Extensive range of optional controllers available Conforms to Building Regulations Part F1 w246 x h268 (PX6) w345 x h375 (PX9) w434 x h434 (PX12) Duct Size: 200/250/315 Select the right product for your application The Range Introducing a new addition to the Xpelair commercial range. The PX range introduces even greater flexibility into the design of commercial and larger domestic ventilation systems. Based on the proven WX range, PX fans are perfect for ceiling and panel applications in kitchens, restaurants, pubs, offices, schools, shops and kiosks. They can be installed at any angle in ceilings, voids and wall panels of any thickness. The ceiling hugging, low profile white fascia is styled to blend into any ceiling type, whether smooth, tiled or textured. For safety, a finger guard is integrated into the ultra slim high gloss ABS fascia. An integral spigot allows the attachment of flexible ducting, such as XFlex. Installation in ceilings and wall panels is rapid thanks to the concealed fixing points provided. Both the PX9 & PX12 are reversible making them ideal for ducted input systems in the hospitality industry. On PX9 & PX12 units a positive plug and socket assembly provides a means of isolation for service access without the safety risk of accidental disconnection. PX9 & PX12 models feature totally enclosed external rotor motors providing constant volume outputs, even in gusty external conditions. Pre-balanced sickle bladed impellers eliminate fan judder and ensure quiet trouble free operation. Sealed for life maintenance free bearings ensure suitability for running at any angle. Running costs are impressively low, and when not in use the silent electro-thermal shutter cassette closes silently against backdraughts. And cleaning has never been easier. The housing, shutter cassette and impeller are all removed in seconds. PX6 PX9 PX12 Reference number 91300AW 91299AW 91298AW Remote switch (not supplied) Extract only Selectable intake, extract or controller operation Speeds 1 2* 2* Extract performance (FID, m 3 /h) high low Extract performance (FID, l/s) high low Intake performance (FID, m 3 /h) high low Intake performance (FID, l/s) high low Sound pressure level (db(a)@3m) high low Ducting size (mm) Electrical power rating (W) Hole diameter (w x h mm) 245 x x x 434 Spigot size (mm) Weight (kg) Guarantee (years, UK) *low speed only applies if fan used with FR22/30 controller. If controller not used fan is only single (high) speed 92

93 Models Controllers PX6 Ref AW High performance extract only axial flow ventilation unit Operated by remote On/Off switch (not supplied) Suitable for installation at any angle in ceilings, voids and wall panels of any thickness Totally enclosed motor Sealed for life maintenance free bearings, suitable for running at any angle Built in silent action electrothermal shutter cassette Ultra slim high gloss ABS fascia with integral safety finger guard PX9 with sickle blade Ref AW High performance intake / extract axial flow ventilation unit Choice of optional controllers Suitable for installation at any angle in ceilings, voids and wall panels of any thickness Balanced external rotor motor and sickle impeller for quiet efficiency Sealed for life maintenance free bearings, suitable for running at any angle Built in silent action electrothermal shutter cassette Ultra slim high gloss ABS fascia with integral safety finger guard PX12 with sickle blade Ref AW High performance intake / extract axial flow ventilation unit Choice of optional controllers. Suitable for installation at any angle in ceilings, voids and wall panels of any thickness Balanced external rotor motor and sickle impeller for quiet efficiency Sealed for life maintenance free bearings, suitable for running at any angle Built in silent action electrothermal shutter cassette Ultra slim high gloss ABS fascia with integral safety finger guard Single Fan Controller FR22/30 Ref AW For use with PX9 and PX12 On/Off control with neon indicator. Used to select between high and low speed, intake and extract Group Fan Controller EC6H Ref AW For use with PX9 and PX12 On/Off control with neon indicator. Infinitely variable speed selection controls extract and intake air flow. For use with up to four fans (not mixed sizes) Group Fan Controller XCC1 Ref AW For use with PX9 and PX12 On/Off control with neon indicator Typical Specifications on page 170. Wiring Diagrams on page 186. Controller Details on page 102. Performance PX6, PX9, PX12 Dimensions (mm) PX6 PX9 PX12 93 Xpelair PX6, PX9 & PX12 Commercial ceiling fans

94 Xpelair RX6, RX9 & RX12 Commercial roof fans Key features Type: Application: Control options: Legislation: Hole diameter: Commercial duty roof mount axial ventilation unit with roof cowl Pubs, restaurants, offices, kitchens, factories, squash courts, schools and shops Extensive range of optional controllers available Conforms to Building Regulations Part F1 184mm (RX6) 257mm (RX9) 324mm (RX12) Select the right product for your application The Range With commercial wall space at a premium, sometimes the only way is up! Xpelair RX models are a neat way of ventilating through glazed and solid roofs and can be used vertically in windows on exposed sites such as coastal areas and high rise buildings. The commercial duty roof fans are particularly suitable for pubs, restaurants, offices, kitchens, factories, and squash courts, schools in areas like changing rooms, and kiln rooms and a wide range of shops. The contoured high gloss white housing is sleekly styled. For safety, a finger guard is integrated into the ultra slim high gloss ABS fascia. The UV stabilised roof cowl assembly is a generous size to provide weather protection at all angles. They are suitable for single and sealed double glazed windows and panels up to 25mm. Installation in wire cast and sealed double glazed roof lights is rapid using Xpelair s unique metal ladderstrip and screw system, ensuring a secure and weather-tight compression seal. For flat roofs an optional roof mounting plate allows RX models to be fitted to dressed curbs. Both the RX9 & RX12 are reversible. All models offer a passive trickle vent option for background ventilation when the fan is off. On RX9 & RX12 units a positive plug and socket assembly provides a means of isolation for service access without the safety risk of accidental disconnection. RX9 & RX12 models feature totally enclosed external rotor motors providing constant volume outputs, even in gusty external conditions. Prebalanced sickle bladed impellers eliminate fan judder and ensure quiet trouble free operation. Sealed for life maintenance free bearings ensure suitability for running at any angle. Running costs are impressively low, and when not in use the silent electrothermal shutter cassette closes silently against backdraughts. And cleaning has never been easier. The housing, shutter cassette and impeller are all removed in seconds. RX6 RX9 RX12 Reference number 90818AW 90424AW 90425AW Remote switch (not supplied) Extract only Selectable intake, extract or controller operation Speeds 1 2* 2* Extract performance (FID, m 3 /h) high low Extract performance (FID, l/s) high low Intake performance (FID, m 3 /h) high low Intake performance (FID, l/s) high low Sound pressure level (db(a)@3m) high low Electrical power rating (W) Hole diameter (Ømm) Max wall thickness (mm) Weight (kg) Guarantee (years, UK) *low speed only applies if fan used with FR22/30 controller. If controller not used fan is only single (high) speed 94

95 Models RX6 Ref AW High performance extract only axial flow ventilation unit Operated by remote On/Off switch (not supplied) Suitable for single and sealed double glazed windows and panels up to 25mm Built in electrothermal shutter cassette Passive trickle vent option for background ventilation with fan Off Easy clean high gloss ABS housing Roof cowl assembly in UV stabilised material provides weather protection at all roof angles Unique metal ladderstrip/screw connection to external grille for security and weathertight seal Supply voltage V 50Hz Performance RX6, RX9, RX12 Range RX9 Ref AW RX12 Ref AW High performance intake/extract axial flow ventilation unit Balanced external rotor motor and sickle bladed impeller for quiet efficiency Choice of optional controllers Tamper-proof internal connection safety plug and socket Typical Specifications on page 170. Wiring Diagrams on page 186. Controller Details on page 102. Controllers Single Fan Controller FR22/30 Ref AW For use with RX9 and RX12 On/Off control with neon indicator. Used to select between high and low speed, intake and extract Group Fan Controller EC6H Ref AW For use with RX9 and RX12 On/Off control with neon indicator. Infinitely variable speed selection controls extract and intake air flow. For use with up to four fans (not mixed sizes) Dimensions (mm) RX Range Installation and Accessories RX6 Kerb Mounting Hole diameter: 184mm Installation Accessories Roof Mounting Plate Ref AK Kerb detail see commercial accessories on page 91 RX9/RX12 Kerb Mounting Hole diameter: 257mm (RX9) 324mm (RX12) Installation Accessories Roof Mounting Plate Ref AK Kerb detail see commercial accessories on page 91 Dimensions (mm) Model A B C D E F G H J RX /35 RX /35 RX /35 Roof Mounting Plate XRP for flat roof applications Dimensions (mm) Model W(min) X Y Z D hole RX RX RX Xpelair RX6, RX9 & RX12 Commercial roof fans

96 Xpelair WX6, WX9 & WX12 Commercial wall fans Key features Type: Application: Control options: Legislation: Hole diameter: Commercial duty ventilation unit Pubs, restaurants, offices, kitchens, factories, schools and shops Extensive range of optional controllers available Conforms to Building Regulations Part F1 w245 x h268 WX6/WX6T w345 x h375 WX9 w434 x h434 WX12 Select the right product for your application The Range Xpelair WX ventilation units the classic face of commercial wall fans. Discretely slim, tough and reliable within a winning formula that has served generations of pubs, businesses and local authorities. Stylish commercial duty unit ventilation designed for pubs, restaurants, offices, kitchens, factories, schools and shops. Suitable for single, cavity brick and current timber frame walls. The wall hugging, low profile white fascia is styled to blend in cleanly with commercial surroundings. For safety, a finger guard is integrated into the Ultra slim high gloss ABS fascia and the exterior wall grille design. On WX9 & WX12 units a positive plug and socket assembly provides a means of isolation for service access without the safety risk of accidental disconnection. All WX models come complete with a wall mounting kit which include a wall liner. Both the WX9 & WX12 are reversible and now feature totally enclosed external rotor motors providing constant volume outputs, even in gusty external conditions. Pre-balanced sickle bladed impellers eliminate fan judder and ensure quiet trouble free operation. Sealed for life maintenance free bearings ensure suitability for running at any angle. Running costs are impressively low, and when not in use the silent electro-thermal shutter cassette closes silently against backdraughts. And cleaning has never been easier. The housing, shutter cassette and impeller are all removed in seconds. WX6 WX6T WX9 WX12 Reference number 90822AW 90823AW 89996AW 90011AW Remote switch (not supplied) Integral adjustable run-on timer (2 to 20 mins) Extract only Selectable intake, extract or controller operation Speeds 1 1 2* 2* Extract performance (FID, m 3 /h) high low Extract performance (FID, l/s) high low Intake performance (FID, m 3 /h) high low Intake performance (FID, l/s) high low Sound pressure level (db(a)@3m) high low Electrical power rating (W) Hole diameter (w x h mm) 245 x x x x 434 Max wall thickness (mm) Weight (kg) Guarantee (years, UK) *low speed only applies if fan used with FR22/30 controller. If controller not used fan is only single (high) speed 96

97 Models WX6 Ref AW 6 high performance extract axial ventilation unit Suitable for single, cavity brick and current timber frame walls Sealed for life maintenance free bearings, suitable for running at any angle. Integrated safety thermal overload protection Built-in silent action electrothermal shutter cassette Passive tricklevent facility for background ventilation with fan Off Ultra slim high gloss ABS facia with integral finger safety guard Shadow grey external grille for unobtrusive external appearance with built-in weather protection IPX4 rated motor WX6T Ref AW As WX6 with overrun timer which typically connects to a lighting circuit Timer adjustable from 2-20mins run on period after light has been switched off IPX4 rated motor Performance WX6/T, WX9, WX12 WX9 Ref AW WX12 Ref AW High performance intake/extract axial ventilation unit Choice of optional controllers Suitable for single, cavity brick and current timber frame walls Balanced external rotor motor and sickle bladed impeller for quiet efficiency Sealed for life maintenance free bearings, suitable for running at any angle Built-in silent action electro-thermal shutter cassette Passive tricklevent facility for background ventilation with fan Off Ultra slim high gloss ABS facia with integral finger safety guard Shadow grey external grille for unobtrusive external appearance with built-in weather protection Tamperproof internal connection safety plug and socket IPX4 rated motor Typical Specifications on page 171. Wiring Diagrams on page 186. Controller Details on page 102. Controllers Single Fan Controller FR22/30 Ref AW For use with WX9 and WX12 On/Off control with neon indicator. Used to select between high and low speed, intake and extract Group Fan Controller EC6H Ref AW For use with WX9 and WX12 On/Off control with neon indicator. Infinitely variable speed selection controls extract and intake air flow. For use with up to four fans (not mixed sizes) Group Fan Controller XCC1 Ref AW For use with WX9 and WX12 On/Off control with neon indicator Dimensions (mm) WX6/T WX9 WX12 Installation WX6/WX6T Wall Mounting WX9/WX12 Wall Mounting Hole diameter: w245 x h268mm Hole size: w345 x h375mm (WX9) w434 x h434mm (WX12) 97 Xpelair WX6, WX9 & WX12 Commercial wall fans

98 Xpelair WXXL350, WXXL400 & WXXL450 High performance extract and intake wall fans Key features The Range Type: Application: Control options: Legislation: Hole size: Commercial duty ventilation unit Pubs, restaurants, offices, kitchens, factories, schools and shops 3 speed controller included Conforms to Building Regulations Part F1 w400 x h400 WXXL350 w450 x h450 WXXL400 w500 x h500 WXXL450 The New Xpelair WXXL range is a designed for use in larger applications where extra extract or input performance is required. Suitable for public areas in pubs, schools, municipal facilities and industry. Used in specialist applications such as squash courts, swimming pools, telephone exchanges, atriums. Xpelair WXXL fans differ from comparable products in FOUR significant ways: Size Although the fan diameters are the same WXXL fans require a substantially smaller hole through the wall. Security Fitted with an electric shutter system and a tough flush fitting aluminium grille complete with bird guard on the external wall face. Control Every fan comes complete with a built in control system which requires connection to a simple switch (also included). Ease of cleaning The easy clean inner grille has a secret fixing which allows the core of the grille to be removed for cleaning without the need to remove the frame. Select the right product for your application Extract wall fans Intake wall fans WXXL350 WXXL400 WXXL450 WXXLS350 WXXLS400 WXXLS450 Reference number 91301AA 91302AA 91303AA 91383AA 91384AA 91385AA Extract wall fan Intake wall fan Electric shutter Speeds Supplied with 3 speed control Max extract performance (FID, m 3 /h) Max extract performance (FID, l/s) Max intake performance (FID, m 3 /h) Max intake performance (FID, l/s) Sound pressure level (db(a)@3m) Electrical power rating (W) Weight (kg) Hole size (w x h mm) 400 x x x x x x 500 Max wall thickness (mm) Guarantee (years)

99 Models Controllers WXXL350 WXXL400 WXXL450 Performance Ref AA Ref AA Ref AA Extract wall fan G.S.M.telescopic wall liner is suitable for solid and cavity walls from 275mm to 375mm External rotor motor rated at IP44 with sealed for life maintenance free bearings Balanced motor and impeller for quiet efficiency Epoxy coated aluminium internal wall grille with removable core for easy cleaning Fan assembly is separately guarded for additional safety Electrically actuated heavy duty aluminium section gravity shutter system is housed behind an anodised aluminium external weather louvre and bird guard Built in three speed control. Separate slimline three position and Off selection switch provided for remote wall mounting Easy access terminal box Dimensions (mm) WXXLS350 WXXLS400 WXXLS450 Ref AA Ref AA Ref AA Intake wall fan Built in washable filter accessible from within the building G.S.M.telescopic wall liner is suitable for solid and cavity walls from 275mm to 375mm External rotor motor rated at IP44 with sealed for life maintenance free bearings Balanced motor and impeller for quiet efficiency Epoxy coated aluminium internal wall grille with removable core for easy cleaning fan assembly is separately guarded for additional safety Electrically actuated heavy duty aluminium section gravity shutter system is housed behind an anodised aluminium external weather louvre and bird guard Built in three speed control. Separate slimline three position and Off selection switch provided for remote wall mounting Easy access terminal box Dimensions (mm) Model W H X I WXXL Integral Speed Control System A three speed transformer is located in the fan housing. The external slimline single gang speed selector provides three fan performances without motor hum usually associated with electronic speed controls Three Speed Controller Ref AA Typical Specifications on page 171. Telescopic wall duct 99 Xpelair WXXL355, WXXL400 & WXXL450 High performance extract and intake wall fans

100 Xpelair ChefX Professional kitchen canopies Tempo Mezzo Presto Key features The Range Type: Application: Control options: Legislation: Commercial kitchen extract canopies Kitchen extract Transformer speed control Conforms to Building Regulations Part F1 A range of kitchen canopies designed for small professional catering and institutional applications. Suitable for pub food preparation and wash up areas, club kitchens, cafeterias, smaller commercial kitchens, staff kitchenettes, student block kitchens, and a range of commercial applications. ChefX canopies are an all in one solution to a range of standard commercial duty kitchen applications. Built to a professional specification. ChefX are designed for continuous heavy use and a more demanding environment. ChefX Presto and Mezzo canopies are fabricated in brush finish stainless steel complete with condensafe channel and drain. The three models in the range are manufactured complete with commercial duty filters and built in high pressure centrifugal fans allowing direct discharge to atmosphere or connection to ductwork. When specifying, as a general guide, the hood should protrude outwards approximately 200mm beyond the working surface with the bottom of the hood 1900mm 2000mm from the floor. Select the right product for your application Tempo Presto Mezzo Reference number 91309AA 91310AA 91311AA Air delivery (m 3 /h@100pa) Electrical power rating (W) Electrical current rating (A) Washable mesh filters Width (mm) Weight (kg) Guarantee (years, UK)

101 Models ChefX Tempo Ref AA Robust design for institutional applications such as student block kitchens and staff rest room food preparation areas Brushed stainless steel housing 400m 3 /h extraction Washable G.S.M mesh filters Built in lighting - 1 x 11W CFL Top LH outlet Built in isolator and speed control with on light Centrifugal fan / scroll assembly ChefX Presto Ref AA For cafeterias, fast food outlets, food preparation and wash up areas Stainless steel housing with G.S.M support components 2200m 3 /h extraction Washable 25mm G.S.M mesh filters Top centre outlet to accept rectangular or circular ductwork Centrifugal double inlet fan and scroll assembly Speed controllable motor IPX4 rated motor Max ambient temp 65 o C ChefX Mezzo Ref AA Higher duty model for cafeterias, fast food outlets, food preparation and wash up areas Stainless steel housing with G.S.M support components 2800m 3 /h extraction Washable 25mm baffle filters Top centre outlet to accept rectangular or circular ductwork Centrifugal double inlet fan and scroll assembly Speed controllable motor. IPX4 rated motor Max ambient temp 65ºC Controllers Five step auto transformer Ref AA Compatible with Presto and Mezzo models. 6 Amp transformer providing five speed operation. Robust ISO casing and IPX4 rated. Typical Specifications on page 172. Wiring Diagrams on page 187. Remote Sensors on page 154. Performance Tempo Presto Mezzo Dimensions (mm) Tempo Presto Mezzo 101 Xpelair ChefX Professional kitchen canopies

102 Xpelair Commercial Sensors and Switches Single Fan Controller FR22/30 Ref AW Sliding switches On/Off 2 speeds: low- high speed Extract - intake airflow Power 'on' indicator For surface or recess mounting Supply voltage: V 50Hz Gloss white Use with: GX9, GX12, WX9, WX12, PX9, PX12, RX9, RX12 w210 x h86 x d41mm Single Direction Group Fan Controller XCC1 Ref AW Sliding switches and speed control knob On/Off Infinitely variable speed control Single direction: extract or intake selected at installation Power 'on' indicator For surface or recess mounting Supply voltage: V 50Hz Gloss White Use with: GX9, GX12, WX9, WX12, PX9, PX12, RX9, RX12 Note: do not mix fan size. For use with up to 4 - size 12 or 6 - size 9 fans units. w160 x h86 x d45mm Reversible Group Fan Electronic Controller EC6H Ref AW Sliding switches and speed control knob On/Off Infinitely variable speed control Extract - intake airflow Power 'on' indicator For surface or recess mounting Supply voltage: V 50Hz Gloss White Use with: GX9, GX12, WX9, WX12, PX9, PX12, RX9, RX12 Note: do not mix fan size. For use with up to 4 - size 12 or 6 - size 9 fans units. w160 x h68 x d45mm Remote Humidistat XRH Ref AW Stand alone humidistat switches on when RH rises to preset level and Off when it declines Fan operation indicator light Pullcord operated override switch Surface or recess mounting White finish Supply voltage V 50Hz Use with: GX6, GX9, GX12, WX6, WX9, WX12, PX6, PX9, PX12, RX6, RX9 & RX12 w160 x h86 x d41mm Passive Infrared Sensor XPIRA Ref AA Position to switch the fan on when body movement is detected. Ideal for infrequently used public spaces Built in run on timer to avoid nuisance tripping For indoor use only Use with: GX6, GX9, GX12, WX6, WX9, WX12, PX6, PX9, PX12, RX6, RX9 & RX12 w86 x h86mm Time Controller DT20B Ref AW Usually connected to the lighting circuit. Fan switches On with the light. Provides continued ventilation run-on period after the light has been switched off User adjustable up to 20min Surface or recess mounting White finish Supply voltage V 50Hz Use with: GX6, GX9, GX12, WX6, WX9, WX12, PX6, PX9, PX12, RX6, RX9 & RX12 w100 x h86 x d45mm Controller HC301 Ref AW On/Off switch Fan only/fan and heater options Variable thermostatic control Suitable for surface or recessed installation Colour: White Used with WH30 and WHP30 w210 x h86 x d41mm Air Quality Sensor AQS Ref AW Provides fully automatic control Detects contaminants such as cigarette smoke, body odours, toilet odours and cooking smells Activates ventilation system when preset threshold level is exceeded Can control up to six fans and accessories Integral timer adjustable from 3-30 mins LED status indicator Surface or recess mounting Supply voltage V 50Hz w160 x h86 x d41mm 102

103 Xpelair Commercial Accessories GX Wall Kits WK WK6/8 200mm (GX6) Ref AA WK6/11 280mm (GX6) Ref AA WK9/8 200mm (GX9) Ref AA WK9/11 280mm (GX9) Ref AA WK12/8 200mm (GX12) Ref AA WK12/11 280mm (GX12) Ref AA For bridging cavity walls and lining double brick walls Steel wall liner Length: 200mm and 280mm Set of 508mm ladder strips Extendible Interlocking Wall Kits WK6 WK6/300 Ref AA WK6/450 Ref AA For bridging cavity wall constructions, or lining solid double brick walls Interlocking facility to build up to required length Available in 300mm or 450mm lengths Complete with 508mm ladder strips Darkroom Cowl DC9 Ref AK For use in scientific and photographic applications Replaces the outer grille on GX9 and GXC9 models Roof, window or wall mounting Hole Ø257mm Colour: black Use with: GX9, GXC9 w475ø d144 x 117 Distance Pieces GXDP Ref AA Allows GX units to be fixed to distorted walls of 38mm minimum thickness By spacing the fan unit and outer grille away from the wall or panel, distortion through over tightening is prevented Set of 6 GX Longer Length Ladder Strips GXL GXL20 20 pack Ref AA GXL50 50 pack Ref AA Used when installing GX fans through walls Length 508mm Easy to cut GX6 & GXC6 2 strips GX9 & GXC9 3 strips GX12 4 strips Roof Cowls RC RC6 Ref AW (GX6, GXC6) RC9 Ref AW (GX9, GXC9) RC12 Ref AW (GX12) For use in roof applications. The cowl is fitted in place of an exterior grille. Can also be used in exposed window or wall applications subject to strong prevailing winds Double Window Kits GXDW GXDW6 (GX6 & GXC6) Ref AA GXDW9 (GX9 & GXC9) Ref AA GXDW12 (GX12) Ref AA For hinged double windows only For installation of GX fans into separate double windows spaced between 32mm and 102mm Allows inner casement window to be opened without dismantling the fan Roof Mounting Plates XRP XRP6 (RX6) Ref AK w592 x h542 x d89 Ø105 XRP9 (RX9) Ref AK w774 x h774 x d101 Ø257 XRP12 (RX12) Ref AK w774 x h774 x d101 Ø324 Provides effective and secure installation in flat roof applications Flame retardant resin bonded fibre glass. Requires the installer to build a kerb onto which plate is fixed. Always use sealant to bed in the outer cowl seal for weatherproof joint Colour black Xpelair Commercial Sensors, Switches & Accessories

104 Xpelair Commercial Accessories Air-Replacement Grilles ARG ARG20 w200 x h200 mm Ref AA ARG30 w300 x h300 mm Ref AA For use with all commercial fans Fitted to doors or partition walls to provide adequate air replacement for a fan Can be used in conjunction with FIRE BLOCK FB in fire doors and panels to prevent the breach of fire protected areas or compartments Each set comprises 2 grilles Fire Blocks FB FB20 w200 x h200 mm FB30 w300 x h300 mm Ref AA Ref AA For use with air replacement grille (ARG) Fitted between two grilles in a fire door or compartment Spec fire rated 60 mins to BS478 Part 8 Protective Wall Grilles PG PG6 (GX6, GXC6, WX6) Ref AA PG9 (GX9, GXC9, WX9) Ref AA PG12 (GX12) Ref AA PGW12 (WX12) Ref AA For use with GX and WX fans to protect the exterior grille from damage by vandals Constructed from steel mesh and finished in black expoxy powder paint Surface mounted to exterior wall using fixing screws and wall plugs provided w356 x h305 x d67mm Flexible Ducting Xflex FD Dia Length FD mm 3m Ref AA 6m Ref AA FD mm 3m Ref AA 6m Ref AA Commercial Diameters FD mm 3m Ref AA 6m Ref AA FD mm 3m Ref AA 6m Ref AA FD m 3m Ref AA 6m Ref AA FD mm 3m Ref AA 6m Ref AA Glass fibre fabric on a PVC coated close pitch steel wire helix. 54 minute fire integrity from within as measured to BS 476: Part 20 - (1987) Can be interlocked and sealed with duct tape to form an airtight seal Attached to spigots using worm drive clips New Aluminium Flexible Ducting Xflex ALU Dia Length ALU mm 10m Ref AA ALU mm 10m Ref AA ALU mm 10m Ref AA Commercial Diameters ALU mm 10m Ref AA ALU mm 10m Ref AA ALU mm 10m Ref AA ALU mm 10m Ref AA Tough foil construction on a high strength wire helix Over 40 minute fire rating BS 476: Part 20 (1987) Thermal Flexible Ducting Xflex TFD Dia Length TFD mm 5m Ref AA 10m Ref AA TFD mm 5m Ref AA 10m Ref AA TFD mm 5m Ref AA 10m Ref AA Commercial Diameters TFD mm 5m Ref AA 10m Ref AA TFD mm 5m Ref AA 10m Ref AA TFD mm 5m Ref AA 10m Ref AA Double skinned insulated aluminium duct with high density fibreglass insulation to minimise condensation formulation 25 minute fire integrity from within as measured to BS 476: Part 20 - (1987) Can be interlocked and sealed with duct tape to form an airtight seal Attached to spigots using worm drive clips 104

105 Xpelair Commercial Accessories Worm Drive Clips WDC Dia WDC mm WDC mm WDC mm Ref AA Ref AA Ref AA Steel clips for connecting flexible ductwork to spigots. Supplied in packs of 10 Grille Box GB Duct Dia Square GB20/ mm 200mm GB20/ mm 200mm GB20/ mm 200mm GB30/ mm 300mm GB30/ mm 300mm GB45/ mm 450mm GB50/ mm 500mm GB60/ mm 600mm Ref AA Ref AA Ref AA Ref AA Ref AA Ref AA Ref AA Ref AA Used in conjunction with egg-crate ceiling grille and ceiling diffuser grille to connect to ductwork Use Xflex FD or TFD to attach to spigot and secure with worm drive dip Spigot Plates SP Duct Dia Square SP mm 180mm Ref AA SP mm 175mm Ref AA SP mm 200mm Ref AA SP mm 250mm Ref AA SP mm 300mm Ref AA SP mm 365mm Ref AA Fixes to the interior surface of wall to connect to Xflex ducting Connect duct using worm drive clips Material: plastic Egg-crate Ceiling Grilles CG Square SATIN SILVER CG20 200mm Ref AA CG30 300mm Ref AA CG45 450mm Ref AA CG50 500mm Ref AA CG60 600mm Ref AA Square WHITE CG20 200mm Ref AW CG30 300mm Ref AW CG45 450mm Ref AW CG50 500mm Ref AW Can be used on ceilings or internal walls as an air replacement grille with large free area Aluminium construction Fixing screws provided (not size 600) Use will grille boxes and Xflex ducting Colours: Satin silver or white Ceiling Diffuser Grilles DG Square SATIN SILVER DG20 200mm Ref AA DG30 300mm Ref AA DG45 450mm Ref AA DG50 500mm Ref AA DG60 600mm Ref AA Square WHITE DG20 200mm Ref AW DG30 300mm Ref AW DG45 450mm Ref AW DG50 500mm Ref AW DG60 600mm Ref AW For air input systems terminating at ceilings and internal walls Adjustable grille vanes to set up direction of airflow for a particular area Fixing screws provided (not size 600) Use with grille boxes and Xflex ducting Aluminium construction Colours: Satin Silver or White Air Volume Dampers AVD Square AVD20 200mm Ref AA AVD30 300mm Ref AA AVD45 450mm Ref AA AVD50 500mm Ref AA Clips directly to an eggcrate grille or ceiling diffuser grille to adjust the volume of air entering the room Lever adjustment Depth 44mm Used together with Grille Box and Xflex ducting Material: Aluminium Mill finish Xpelair Commercial Sensors, Switches & Accessories

106 Heating and Air Treatment Whether at home or work we all try to create just the right atmosphere. It affects our comfort, our health and is good for business. Achieving that goal will vary by location, time of day, the seasons and the activity. It might be stale air and lack of air movement in a public house or factory, hygiene concerns in a doctor s waiting room, a cold winter s draught through a shop doorway or an uncomfortable bedroom on a hot summers night. Some points to bear in mind. At work, employers are legally required to ensure that during working hours temperatures are reasonable and comfortable. In public places, body heat and odour can be the overriding problem. The average heat output in a pub is about 250W per person. So, for example, a pub with 80 people can be adding 20kW of heat to an enclosed room. Solar heat gain can be a major contributor to discomfort in glazed atriums and conservatories. An open window may make matters worse with the ingress of noise and fumes. The activity inside may limit or forbid unattenuated openings to the outside e.g. a factory process or a disco. At home, double-glazing and improved insulation provide higher levels of air tightness than ever before. This is good for our general comfort but often fails to cope with seasonal extremes. Xpelair s wide range of ventilation solutions now includes heating, cooling and filtration systems designed to provide pleasant air movement that refreshes and combats stale air, remove airborne pollutants at source, and heat or cool on demand. In addition, controllers and Xpelair accessories allow you to design a customised solution for individual applications. 106

107 Heating and Air Treatment Screen Digitemp WH & WHP DCH PlinthHeat Heat Whispair Electrostatic Air Cleaners DigiPure Page Number Type Air Fan heater Fan heater Plinth Over door Circulation Air cleaner Air cleaner conditioner heater heater fan Application Heating and Commercial Domestic & Kitchen Hot air Destratification Air Air cooling commercial curtain purification purification Models Max heating output (kw) n/a n/a n/a Max cooling capacity (kw) 2.45 n/a n/a n/a n/a n/a n/a n/a Mounting Wall Wall Wall Cupboard Wall Ceiling Ceiling Floor, wall base ceiling Control Options Remote Control Integral Controls Heating and Air treatment

108 Xpelair Digitemp Comfort air conditioning and heating Key features The Range Type: Modular climate control Cool in summer, cosy in winter. Xpelair Digitemp is a stylish slimline wall Application: Control options: Hole diameter: Domestic, commercial and leisure Remote hand held 155mm Digitemp offers all year climate control for homes of all shapes and sizes. Installing climate control can bring a sense of comfort and style to a home, fulfiling the expectations of modern family life. The self-contained Digitemp unit is ideal for use in the bedroom and living spaces and studies. The quiet and sleek unit is installed internally without the use of an unsightly outdoor condensing unit making it particularly suitable for use in apartments and multi storey locations where other systems require planning permission. The Digitemp is even suitable for some mounted all-in-one solution, providing all year round comfort cooling, heating and dehumidification all at the touch of a hand held remote control. With no outdoor condensing unit to install and no gas connections, the unit is easy and quick to fit at high or low level. Installation can be done internally with the only sign of the system on the outside of the building being two discreet grilles. The WA210N and WA245N models provide cooling only. Whereas the WHP210N and WHP245N provide the convenience of heating and cooling in listed building applications. a single unit. Select the right product for your application WA210N WA245N WHP210N WHP245N Reference Number 91173AA 91174AA 91175AA 91154AA Cooling capacity (kw) Heating capacity (kw) EER (Energy Efficiency Ratio) COP (Coefficient of Performance) Max. absorbed power rating (W) Dehumidification capacity (l/h) Energy efficiency class (cooling) A C A C Energy efficiency class (heating) C F Room air volume (m 3 /h) Fan speed settings Max. noise levels db(a) Refrigerant type R410a R410a R410a R410a Max range of infrared remote control (m) Power supply (V) Power supply (Hz) Guarantee (years, UK) Weight kg

109 Models Can operate in cooling, heating or dehumidification modes to maximise comfort. Easy installation from within the room - patented folding grille system eliminates the need for external access Everything needed to fit the unit is supplied apart from a drill and Ø155mm core cutter! The electronic control system includes infrared remote control night function and automatic operation Can be installed at high or low level for maximum flexibility and useable space Economic and efficient, combining low power consumption when cooling with a high efficiency heating capacity Digitemp uses a three speed fan including night mode for super-quiet operation Factory sealed refrigerant system eliminates the need to connect hoses Self-diagnostic programme for all maintenance requirements Dimensions (mm) Cooling and Dehumidification Digitemp WA210N 2.1kW (cooling) Ref AA Digitemp WA245N 2.1kW (cooling) Ref AA Cooling, Heating and Dehumidification Digitemp WHP210N 2.1kW (cooling) and 1.9kW (heating) Ref AA Digitemp WHP245N 2.45kW (cooling) and 2.03kW (heating) Ref AA Typical Specifications on page 172. Controllers The automatic control system provides precise climate control at the press of a button. All operational modes are programmable using the infrared handset - no need to move to adjust the room temperature. Digitemp Range Installation High level installation Installing Digitemp from within the room at high or low level is quick and easy. The refrigerant system is factory sealed so installation does not involve opening the system or the connection of any hoses. Digitemp can only be positioned against an outside wall. Where possible the unit should be sited in the centre of the wall. Two 155mm diameter holes are core drilled at a sloping angle towards the outside. The diameter must not be reduced or restricted. The indoor wall bracket and ducts are fitted. The patented, folding, outside inlet and outlet grilles are installed from within the room. The unit is fixed to the bracket with care taken that it is perfectly level. The unit is wired to a fused spur. Low level installation Internal appearance External appearance 109 Xpelair Digitemp Comfort air conditioning and heating

110 Xpelair WH30, WH60 & WHP30 Commercial wall heaters WH30 WHP30 WH60 Key features The Range Type: Application: Control options: Wall Mounted Heaters Commercial and Industrial Integral/remote The Xpelair WH range of wall heaters have stood the test of time to remain market leaders. The WH range is perfect for use in factories, warehouses, workshops, canteens, and is also ideal for public areas of shops, waiting rooms, office, garages, hospitals, large stores and even agricultural applications. This has resulted in a range of tough, compact space heaters for the most demanding environments. The WH30 and WH60 models provide robust and rugged heating units, while the WHP30 provides comfortable, reliable heating solutions for shops, offices, domestic workshops and conservatories. Whatever the size, shape and application of a project, the WH range has a unit that will suit its heating requirements. Efficient, stylish, discreet and energy efficient, the WH range offers choice, flexibility and outstanding heating performance. The WH range has gained a worldwide reputation for excellence and the range continues to be built to the high standard that has won it this acclaim. Select the right product for your application WH30 WH60 WHP30 Reference number 98392AC 00147AC 89999AW Remote switch (not supplied) Electrical power (kw) Phase 1 1 or 3 1 Air delivery (m 3 /h) Air delivery (l/s) Temperature increase (ºC) Weight (kg) Guarantee (years, UK)

111 Models Controllers Xpelair WH30 Ref AC 3kW industrial fan heater Compact wall hung design Heavy duty steel casing with die cast aluminium guards Spiral wound Nichrome wire element Metal wall bracket Multi directional positioning -180 o horizontal swivel and 45 o vertical tilt then locked in position Wall bracket cover Double safety feature of thermal cut out with auto reset and one shot fusible link Single phase product For cool air circulation facility and thermostatic heating control use HC301 Controller (not supplied) Xpelair WHP30 Ref AW 3kW commercial fan heater Fan heater complete with HC301 thermostatic controller Compact wall hung design Flame retardant polycarbonate / glass filled nylon casing Spiral wound Nichrome wire element Grey wall bracket Multi directional positioning o horizontal swivel and 45 o vertical tilt then locked in position Double insulated with two thermal cut outs Finished in a white and grey casing Single phase product For cool air circulation facility and thermostatic heating control use HC301 Controller (included) HC301 Controller for WH30 and WHP30 Ref AW Controller provides On/Off switching combined with fan only or fan and heater operation. Variable thermostatic control. Not suitable for WH60. Xpelair WH60 features over the WH30 Ref AC 6kW industrial fan heater Wall or ceiling mounting with multi directional positioning o horizontal swivel and 45 o vertical tilt then locked in position Suitable for Single and Three phase supplies Operated by remote switch (not supplied) Dimensions (mm) WH30 WH60 WHP30 Installation and Accessories WH30 Should be sited between 2m and 2.5m from the floor level to the centre of the unit, a minimum of 200mm from the ceiling and 100mm from adjacent walls and other objects. Not recommend for rooms with a ceiling height greater then 5m. Typical Specifications on page 172. Wiring Diagrams on page 187. Remote Sensors on page 102. WHP30 Should be sited at least 1.8m from the floor level to the centre of the unit, a minimum of 150mm from the ceiling and 300mm from adjacent walls and other objects. Not recommend for rooms with a ceiling height greater then 5m. WH60 Recommended height 2.3m 2.6m floor to centre of heater 111 Xpelair WH30, WH60 & WHP30 Commercial wall heaters

112 Xpelair PlinthHeat & DCH3000A Plinth heaters and Commercial wall heaters DCH PlinthHeat Key features The Range Type: Application: Control options: Hole diameter: Unitary Heating Shops, offices, kitchens Integral/remote w440 x h95mm The PlinthHeat range can provide vital warmth to a cold floor and rapidly heat a room. The unit sits neatly in the plinth below a kitchen cupboard to provide an unobtrusive flow of warm air at floor level. Available with built-in control or for further convenience a thermostat and switch can be wall mounted elsewhere in the room. The units are available in three colours to match modern décor; ice white, conker brown and brushed stainless steel. The wall fitted DCH 3000A fan powered heater circulates instant warmth to a room. From its unobtrusive position on any wall, the heater spreads heat and comfort around the room while remaining inconspicuous and quiet. Suitable for a variety of commercial applications including hallways, offices, pubs, restaurants, shops and hotel rooms, the sleek wall-mounted unit fits perfectly into any busy area where reliable, comfortable heat is required. Requiring only two wall screw fixings, the unit is easy to fit and lightweight, making it ideal for rented or additional spot heating applications. The heater offers a choice of three heat outputs and can be automatically regulated using the built in thermostatic control. For all year round comfort, the heater becomes a circulation fan at the flick of a switch. Select the right product for your application PlinthHeat BR PlinthHeat WR PlinthHeat SR PlinthHeat B PlinthHeat W PlinthHeat S DCH3000A Reference number 91468AB 91467AW 91313AW 91466AB 91465AW 91312AW 90792AW Integral Control Remote Control Requires remote control kit Electrical power (kw) No. of heat settings Phase 1 Air delivery (m 3 /h) Air delivery (l/s) Colour brown white stainless steel brown white stainless steel Weight (kg) Guarantee (years, UK)

113 Models PlinthHeat with remote control* Ref AW Finish: Ice white PlinthHeat with remote control * Ref AB Finish: Conker brown PlinthHeat with remote control* Ref AW Finish: Stainless steel PlinthHeat with integral control Ref AW Finish: Ice white PlinthHeat with integral control Ref AB Finish: Conker brown PlinthHeat with integral control Ref AW Finish: Stainless steel Dimensions (mm) PlinthHeat Installation PlinthHeat Hole size: 440mm width 95mm height Electrical supply V 50Hz single phase. Available in a choice of models with integral controls or with remote thermostatic controls 1kW and 2kW settings Stitched black heat element Maintenance free motor with sealed for life bearings Power On indicator lamp Automatic thermal cut out for safety Fits flush with standard plinths of 120mm and over Crossflow blower Available in ice white, conker brown and stainless steel finishes * Requires remote thermostatic control kit consisting of wall mounted single stage variable thermostat, fused double pole switch, two gang box and cable wall clamp. Ref DCH3000A DHC3000A Heater should be mounted not less than 305mm from the floor or 610mm from a ceiling and nearby objects. The unit must be mounted on an unbroken surface which completely covers the back panel. Xpelair DCH3000A Ref AW 3kW wall mounted heater with circulation fan Three heat settings - 1kW, 2kW and 3kW Adjustable EnergySaver temperature sensor control regulates heat output Easy installation and simple operation Typical Specifications on page 173. Wiring Diagrams on page Xpelair PlinthHeat & DCH3000A Plinth heaters & Commercial wall heaters

114 Xpelair ScreenHeat Doorway hot air curtains Key features The Range Type: Application: Control: Unitary Heating Shops, offices, kitchens Integral/remote The ScreenHeat range of fan powered doorway heaters provides the ideal solution for draught exclusion on external doors. When mounted on the inside of an external door, the ScreenHeat creates a hot air curtain to prevent cold draughts entering a building. In summer, the ScreenHeat can be switched to run only with the fan to form a barrier against incoming dust and provide a refreshing breeze. Suitable for a range of doorway applications in commercial premises such as shops, offices, workshops and stores, the ScreenHeat is designed for fast installation with two key hole-slot brackets providing complete flexibility of adjustment from vertical to horizontal. Easily accessible switches allow the option to run the unit on fan only or at half or full heat output. ScreenHeat units are available in a contemporary powder coated finish. Select the right product for your application ScreenHeat 3 ScreenHeat 4.5 Reference number 91469AW 91470AW Integral Control Electrical power (kw) No. of heat settings 2 & fan only 2 & fan only Air delivery (m 3 /h) Air delivery (l/s) Colour white/grey white/grey Weight (kg) Guarantee (years, UK)

115 Models ScreenHeat 3 Ref AW Doorway hot air curtain Two heat outputs: 1.5kW, and 3kW High volume throughput 250m 3 /h Smooth running, shaded pole motor, with greased for life bearings and safety thermal overload protection Heater element is of open coil design supported by ceramic insulators The heater has a separate thermal cut-out Integral switching for ease of installation Zinc coated steel, powder coated body Two mounting brackets which can be fitted prior to main case Brackets allow the unit to be rotated from vertical to horizontal Tangential blower White/grey finish ScreenHeat 4.5 Ref AW Features over the ScreenHeat 3 Two heat outputs kW and 4.5kW Typical Specifications on page 173. Wiring Diagrams on page 188. Dimensions (mm) ScreenHeat Installation and Accessories Ceiling Mount Wall Mount ScreenHeat The units can be fixed directly to the wall using the key slot holes provided. Fit directly above the door at a height of between 1.8 to 2.25m from the floor. The recommended cable sizes are 2.5mm 2 for the 3 and 4.0mm 2 for the 4.5. For an adjustable outlet use the brackets provided. These versatile brackets offer flexible positioning and adjustment. Electrical supply V 50Hz single phase. 115 Xpelair ScreenHeat Doorway hot air curtains

116 Xpelair Whispair Commercial ceiling fan range Key features Type: Application: Control options: Commercial quality cooling and destratification fans Commercial/Industrial Range of optional controllers available Select the right product for your application The Range Originally designed to provide a cool circulation of air during warm periods, Xpelair Whispair is a popular choice for winter applications too, where their use as heat destratification units can reduce heating costs. These commercial quality products are designed for use in public buildings, shops, theme pubs, restaurants, village halls, churches, hospitals, schools, farm buildings, factories, warehouses and other commercial buildings. Whispair are designed for worldwide use, including hot and humid conditions. The units are rated for continuous operation in commercial applications at temperatures up to 40ºC and are suitable for upwards or downwards airflow. The triple bladed units are available in four sizes with swept diameters from 900 to 1500mm. Fan blades are steel and are supplied in matched sets. Whispair products or fans are supplied with a choice of two lengths of suspension rod giving overall drops of 375 or 750mm. In summer the atmosphere can become stifling hot. Whispair can provide immediate relief by quietly delivering a continuous cooling breeze over a wide area. To maximise the benefit it is good practice to introduce fresh air into the area. In winter stratification will naturally occur in a room as hot air rises to ceiling level (or the apex of the roof) and cooler air sinks to ground level. Xpelair Whispair fans will effectively destratisfy the hot air which gathers at ceiling height by pushing it downwards to mix with cooler air nearer to ground level, thus providing a more uniform temperature profile from floor to ceiling. This results in reduced heating costs as all the hot air does not gather at ceiling height, and thermal losses are reduced. The units should be set for downward airflow at low speed for optimum effect. For automatic control all Whispair have integral anti-vibration bobbins and a continuously rated capacitor start and run external rotor motor. The motor incorporates two sets of caged ball bearings for extra long life. The optional Xpelair ThermoMiser sensor control system can automatically compare high and low level temperatures and ensure that the fans are operated to maximise energy efficiency. This controller should be sited where the ambient is less than 35ºC, with the two sensors fitted at high and low level and connected using the cables supplied. In summer the control knob can be used to manually override the sensors for manual control. For no-frills speed control the Xpelair Whispair controllers are available for the control of a single fan or groups of up to 6 fans. NWAN36 NWAN48 NWAN56 NWAN60 Reference number 90409AW 90410AW 90411AW 90412AW Remote optional controllers available Swept diameter (mm) Reversible operation Maximum speed (rpm) Air delivery (m 3 /h) Air delivery (l/s) Electrical power rating (W) Overall drop options (mm) 375/ / / /750 Weight (kg)* Guarantee (years, UK) *All models 6.5kg with marginal weight variance according to sweep diameter 116

117 Models Controllers NWAN36 Ref AW 900mm diameter sweep fan for cooling or destratification NWAN48 Ref AW 1200mm diameter sweep fan for cooling or destratification NWAN56 Ref AW 1400mm diameter sweep fan for cooling or destratification NWAN60 Ref AW 1500mm diameter sweep fan for cooling or destratification Tip! For optimum performance of Xpelair Whispair choose a dedicated Xpelair controller. Xpelair Single Whispair Controller WAC1 Ref AW Two slide switches provides On/Off operation and 5 speed settings. Complete with transformer controller for quiet operation and fan running indicator light Xpelair Group Whispair Controller WAC6 Ref AW For the simultaneous speed control of 1 to 6 Whispair units. Two slide switches provides On/Off operation and infinitely available speed settings Complete with fan running indicator light Xpelair Group Whispair Reversing Controller WAC6R Ref AW For the simultaneous speed control of 1 to 6 Whispair units. Two slide switches provides On/Off operation and infinitely variable speed settings. Complete with fan running indicator light and choice of winter/summer upwards or downwards airflow Xpelair Whispair Auto Temperature Controller AWC Ref AW De-stratification controller supplied with two thermo sensors at high / low level monitoring between preset minimum and maximum values. For the simultaneous speed control of 1 to 10 Whispair units. Three slide switches provides On/Off operation and upwards or downwards rotation, manual override Complete with fan running light w210 x h86 x d45mm Typical Specifications on page 174. Wiring Diagrams on page 188. Air Movement Heat Layers Summer cooling Heat conservation Dimensions (mm) Whispair Range Installation Which fan diameter do I choose? Whispair units are delivered with two suspension rods. Ideally the fan blade should be at 2700mm or more from the floor (but never less than 2400mm) and a minimum of 375mm from the ceiling. Spacing will vary according to individual building layout. As a rule of thumb, in the majority of temperate climate applications Xpelair Whispair should be spaced mm between blade tips apart. In hot and humid applications this should be reduced by a third. The units should be no closer that one Dimensions (mm) NWAN36 NWAN48 NWAN56 NWAN60 Sweep Diameter Overall Drop All models, ceiling to bottom of fan: 375 or 750 (two down rods supplied) and a half diameters from pillars and walls in order to avoid turbulence unbalancing the unit and causing it to sway. Check that the units are clear of lighting to avoid strobe effects. A speed controller is recommended particularly for multi unit installations. 117 Xpelair Whispair Commercial ceiling fan range

118 Xpelair Electrostatic Air Cleaners Surface and recessed models EAC400 EACF400 Key features The Range Type: Application: Control: Ceiling Mounted Air Cleaners Pubs, clubs, restaurants, offices Remote handheld With the introduction of non-smoking areas in public places, other contaminants are now more evident. Suitable for commercial premises such as pubs, restaurants, conference rooms, offices, meeting rooms and clubs. Xpelair Electrostatic Air Cleaners can be used on their own or as part of a complete ventilation strategy. Ventilation relies on a flow of air across a space. Often in pubs and restaurants, the design of nooks and alcoves so called dead areas areas creates unventilated spaces. The area around the dartboard tends to be a 'hot spot'; and at the bar it is good practice to counter stale moistair drifting towards serving staff. Airborne dust is also removed down to 0.01 microns. As well as healthier air quality, Electrostatic Air Cleaners means less frequent cleaning and redecoration, resulting in lower costs. Xpelair Electrostatic Air Cleaners are a convenient way of dealing with airbourne contaminants at source, so preventing it migrating to other parts of the building. They are easy to fit to a ceiling or can be recessed where a suspended ceiling or ceiling void is available. All units come complete with a hand held remote On/Off, speed control so that the unit can be easily operated by staff. Select the right product for your application EAC400K EAC400W EAC700K EAC700W EACF400W Reference number 89869AK 89861AW 89870AK 89862AW 90015AW Ceiling mounting Surface Surface Surface Surface Recessed Air flow (m 3 /h) High Medium 660 Low Sound pressure level (db(a)@3m) Number of cells Max electrical power (W) Finish Black/woodgrain White Black/woodgrain White White Installed weight (kg) Guarantee (years, UK)

119 Models Electrostatic Air Cleaners EAC Surface mounted on ceiling Airflow: 400 to 1000m 3 /h EAC400K Ref: 89869AK Black/wood grain EAC400W Ref:89861AW White Airflow: 1000 to 2000m 3 /h EAC700K Ref: 89870AK Black/wood grain EAC700W Ref: 89862AW White Available in two sizes/outputs for max. areas of 45sqm and 90sqm Mounting rails provide simple and fast installation Mesh pre-filter Dimensions (mm) Installation Particle charger and aluminium electrostatic plate cell Effective air distribution pattern Complete with hand held infrared remote control High efficiency fans Five speeds Pre selectable start-up speed Status indicator panel. A 'wash' LED indicates the needs to clean the cell and pre-filter Available in black/woodgrain finish or white For odour removal such as hairdressing sprays, kitchens etc. an additional active carbon filter is available Fits both sizes of unit Ref: 89884AA Electrostatic Air Cleaners EACF Recess mounted Airflow: 420 to 780m 3 /h EACF400W White Ref: 90015AW EAC400 Range EAC700 Range EACF400 The design of an Air Cleaning System is straightforward, involving a set sequence of steps: Step 1: Volume of Affected Area or Room Determine overall volume of affected area or room. Step 2: Rate of Air Cleans per Hour From the table, select the most appropriate hourly air clean rate. The rates listed relate to the likely severity of the indoor pollution problem. Width x Length x Average Height =m 3. Light Medium Heavy 6 air cleans/hr 8 air cleans/hr 10 air cleans/hr Office Restaurant Pub Computer Room Conference Room Social Club Foyer area Dance Hall Restaurant/Bar Step 3: Total Air Clean Rate Calculate the total air clean rate for the problem area: Room Volume (m 3 ) [Step 1]xRate of Air Cleans per Hour=(m 3 /hr) [Step 2] Available for max. area of 40sqm Designed for unobtrusive installation in suspended 600 x 600mm ceiling tiles Fascia grille may be painted to match the ceiling décor Mesh pre-filter Particle charger and aluminium electrostatic plate cell Effective air distribution pattern Three speeds High efficiency fans Complete with hand held infrared remote control Pre selectable start-up speed Status indicator panel. A 'wash' LED indicates the needs to clean the cell and pre-filter Fascia colour: off white Typical Specifications on page 174. Step 4: Size and Number of Electrostatic Air Cleaners The EAC flow rates as calculated should not exceed the value obtained at the three quarter speed setting. This ensures that the system designed has some additional capacity should pollution conditions be abnormal. Room Size 6mx4mx3m=72m 3 Air Cleans/hr 10 Total Air Clean Rate 10x72m 3 =720m 3 /h 1 EAC400 is required for this area. 119 Xpelair Electrostatic Air Cleaners Surface and recessed models

120 Xpelair DigiPure Polarising air filtration NEW XAC690UC XAC420/480P XAC550/910CC XAC520/640W Key features The Range Type: Application: Control options: Air Cleaners Pubs, clubs, restaurants, offices Remote handheld Indoor pollution is a growing problem with air inside our buildings being up to 100 times more polluted than outdoors. Sources of indoor pollution include dust, mould spores, biological contaminants, pollen, tobacco smoke (in care homes and private clubs) and volatile organic compounds. They are especially dangerous to the elderly, infants and allergy sufferers. Xpelair introduces ESSA a unique technology that cleans indoor air to unprecedented levels without producing harmful ozone. Suitable for care homes, hospitals, hotels, schools, surgeries, leisure facilities, offices and commercial premises where there is a responsibility to provide a safe and comfortable environment for those who use them. Xpelair DigiPure uses a unique and patented air cleaning technology that removes up to 98% of airborne pollutants. Available in several unit types, air is drawn though the unit capturing pollutants down to 0.01 micron leaving the air we breathe clean, safe and healthy. The system uses polarising screens and removable high specification filters. The system does not use HEPA filters and produces no ozone in the process. The technology has been endorsed by the British Allergy Foundation (allergy UK). Robust construction Easy access filters Select the right product for your application XAC420P XAC480P XAC520W XAC640W XAC550CC XAC910CC XAC690UC Reference number 91215AA 91216AA 91217AA 91218AA 91219AA 91220AA 91221AA Type Portable Portable Wall unit Wall unit Cassette Cassette Under ceiling Airflow (m 3 /h) High Medium Low Sound pressure level (db(a)@3m) max Weight (kg) Guarantee (years, UK)

121 Models DigiPure Portable Models XAC420P Ref AA Suitable for floor areas up to 84m 2 XAC480P Ref AA Suitable for floor areas up to 84m 2 Ideal for medical / nursing home environments where the requirement is for usage in varying locations in conjunction with other treatment Status indicator On/Off and three speeds Fully mobile Robust construction DigiPure Wall Models XAC520W Ref AA Suitable for floor areas up to 102m 2 XAC640W Ref AA Suitable for floor areas up to 135m 2 Performance For commercial and medical use High wall cabinet style Large grille inlet area Adjustable outlet louvre Removable washable pre-filter Balanced tangential fan for quiet operation Status indicator Hand held remote control provides On/Off and 3 speed control DigiPure Ceiling Cassettes XAC550CC Ref AA Suitable for floor areas up to 130m 2 XAC910CC Ref AA Suitable for floor areas up to 204m 2 For commercial and medical use Recess mounting for suspended ceilings Requires 330mm void Attractively styled fascia with safety fingerguard Adjustable four way outlet louvres for even room distribution Quiet centrifugal fan Status indicator Hand held remote control and louvre control Easy access to filter section DigiPure Under-Ceiling Units XAC690UC Ref AA Suitable for floor areas up to 163m 2 For commercial and medical use Surface mounted to the ceiling For floor areas up to 1750sq ft Attractive louvre outlets at both ends Quiet centrifugal fan Status indicator Easy access filters Hand held remote control provides on-off and 3 speed control * Replacement Essa filter medium available for all models Ref AA Dimensions (mm) XAC420/80P XAC520/640W XAC550/910CC XAC690UC Dimensions (mm) Model Width Depth Height A B C XAC420P XAC480P XAC520W XAC640W XAC550CC XAC910CC XAC690UC Xpelair DigiPure Polarising air filtration 121

122 Industrial Ventilation Industrial fans are used in a wide range of commercial and industrial applications to provide a healthy and safe environment in which to work. Control of Substances Hazardous to Health (COSHH) Regulations are particularly relevant to industrial processes. Introduced in 2002 and amended in 2005 they require employers in all workplaces to control exposure to substances to prevent ill health. Substances include adhesives, cleaning agents, fumes from soldering and welding, naturally occurring substances such as dust and biological agents such as bacteria and other micro organisms. Effective ventilation has an important part to play in reducing these risks. Xpelair offers a comprehensive range of industrial products and associated ventilation accessories and controls, which can be combined to design bespoke systems to suit a wide range of specific ventilation applications. Once a system is installed COSHH Regulations require it to be used and maintained, so access for routine, documented inspection is also an important consideration. Workplace (Health, Safety & Welfare) Regulations 1992 (section 6) and the associated AcOP requires effective and suitable provision is made so that every enclosed workplace is ventilated by a sufficient quantity of fresh air. Although no maximum temperature is specified in the Regulations, an accepted zone of thermal comfort is between 16-24ºC. Building design, shading, supply & extract ventilation, destratification and air circulation can be combined to provide a comfortable, healthy workplace environment. 122

123 Industrial Ventilation Scimitar XPMS Scimitar XSCS Rapier XPMA Rapier XSCA Rapier XRA XMV XID Page Number Fan type Plate mounted Short case Plate mounted Short case Roof fan Mixed flow Metal axial axial axial axial & cowl roof inline Positioning Wall / ceiling Ducted Wall / ceiling Ducted Roof Roof Above ceiling Models Max diameter (mm) Max extract rate (m 3 /s) Max power (W) NEW NEW XIDP Page Number Fan type Plastic inline Mixed flow Compact Attenuated Versatile Attenuated Air circulation inline inline inline attenuated inline inline Positioning Above ceiling Above ceiling Above ceiling Above ceiling Above ceiling Above ceiling Free standing/ Suspended Models Max diameter (mm) Max extract rate (m 3 /s) Max power (W) For Industrial Controllers & Accessories see pages Xpress MinimX C LoSound C CubeX C HiFlo CMAX ManCoolers 123 Industrial Ventilation

124 Xpelair Scimitar XPMS Sickle blade plate fans Key features The Range Type: Application: Control options: Plate mounted axial Commercial/Industrial Electronic/Transformer speed control Xpelair introduces a new generation of sickle blade fans designed for a wide range of commercial and industrial ventilation applications. The blade design optimises airflow performance whilst minimising sound levels. The blades are directly mounted to capacitor start and run external rotor motors and then dynamically balanced. The robust wall plate incorporates a bellmouth entry and four fixing points for simple installation. And for safety a roomside protective finger guard is fitted as standard. The Scimitar range can be installed at any angle and is fully speed controllable. Plate mounted XPMS fans are supplied in Form A running. Models Select the right product for your application Plate and bellmouth: One piece galvanised steel pressing with corrosion resistant powder coat finish. Robust steel fingerguard to BS 848 Part 5 / EN 294 Impeller: Press steel sickle blade design for high performance and low noise Blades are dynamically balanced to ISO : 1986 Grade G 6.3 Motor: Totally enclosed capacitor start & run external rotor motor. Ball/Roller bearings are sealed for life Insulation is to class F 315mm are class B Fully speed controllable except XPMS Safety thermal overload protection as standard with terminals provided for connection Protected to IP44 Connection terminal box to IP54 Can be wired for reverse operation (with reduction in performance) Suitable for ambient temperatures from -30ºC to +60ºC Supply voltage: v 50Hz XPMS XPMS XPMS XPMS XPMS Reference number 91526AA 91527AA 91529AA 91530AA 91532AA Fan blade diameter (mm) No. poles Nominal fan speed (rpm) Extract performance (FID, m 3 /s) 0Pa Pa Pa Pa Pa Pa Pa Pa 0.78 Sound pressure level Max electrical power rating (W) Electrical current FLC (A) Electrical current SC (A) step speed controller 91367AA 91367AA 91367AA 91367AA Electronic speed controller 89903AA 89903AA 89903AA 89904AA Guarantee (years)

125 Controllers Dimensions (mm) Industrial Fan Controller XCW Electronic speed control Provides On/Off and infinitely variable speed control Fan operation indicator light Surface or recess mounting w160 x h86mm 5 Step Transformer Speed Controller Multi-tapped auto transformer giving 5 stepped speeds allowing accurate adjustment to suit site conditions Provides five speed and On/Off function Robust ISO casing IPX4 protected Size Typical Specifications on page 175. Wiring Diagrams on page 188. Control Details on pages 154. Performance XPMS250 to 450 Installation and Accessories Xpelair XPMS Plate fans can be installed at any angle. Installation through a outside wall should be with a finger guard if below 2.5 m with suitable external weather protection. Either an external louvre type EG or a louvre shutter type XLS. Details on page 156. XPMS500 to 630 Dimensions (mm) Model A B C ØD ØE F G H XPMS XPMS XPMS XPMS XPMS XPMS XPMS XLS External Louvre Shutter XLS315 (XPMS315) Ref AA XLS350 (XPMS350) Ref AA XLS400 (XPMS400) Ref AA XLS450 (XPMS450) Ref AA XLS500 (XPMS500) Ref AA XLS670 (XPMS630) Ref AA Static Pressure [Pa] XPMS XPMS XPMS XPMS XPMS XPMS XPMS Airflow [m 3 /s] Select the right product for your application XPMS XPMS XPMS XPMS XPMS XPMS XPMS Reference number 91534AA 91536AA 91531AA 91533AA 91535AA 91537AA 91539AA Fan blade diameter (mm) No. poles Nominal fan speed (rpm) Extract performance (FID, m 3 /s) 0Pa Pa Pa Pa Pa Pa Pa Sound pressure level Max electrical power rating (W) Electrical current FLC (A) Electrical current SC (A) step speed controller 91369AA 91369AA 91367AA 91367AA 91367AA 91368AA 91368AA Electronic speed controller 89903AA 89903AA 89904AA 89904AA Guarantee (years) Static Pressure [Pa] XPMS XPMS XPMS XPMS XPMS Airflow [m 3 /s] 125 Xpelair Scimitar XMPS Sickle blade plate fans

126 Xpelair Scimitar XSCS Sickle blade short case fans Key features The Range Type: Application: Control options: Short case axial Commercial/Industrial Electronic/Transformer speed control Xpelair introduces a new generation of sickle blade fans designed for a wide range of commercial and industrial ducted ventilation applications. The blade design optimises airflow performance whilst minimising sound levels. The robust short case is rolled and electro welded with rolled flanges. Cased units are supplied in form B running with motor downstream. The Scimitar range can be installed at any angle and is fully speed controllable. The blades are directly mounted to capacitor start and run external rotor motors and then dynamically balanced. Models Select the right product for your application Casing: Compact and robust construction with corrosion resistant powder coat finish Impeller: Press steel sickle blade design for high performance and low noise Blades are dynamically balanced to ISO : 1986 Grade G 6.3 Motor: Totally enclosed capacitor start & run external rotor motor. Bearings are sealed for life Insulation is to class F Fully speed controllable except XSCS Safety thermal overload protection as standard with terminals provided for connection Protected to IP44 Connection terminal box to IP54 Can be wired for reverse operation (with reduction in performance) Suitable for ambient temperatures from - 30ºC to +60ºC Supply voltage: V 50Hz XSCS XSCS XSCS XSCS XSCS Reference number 91570AA 91571AA 91573AA 91574AA 91576AA Fan blade diameter (mm) No. poles Nominal fan speed (rpm) Extract performance (FID, m 3 /s) 0Pa Pa Pa Pa Pa Pa Pa Pa 0.78 Sound pressure level Max electrical power rating (W) Electrical current FLC (A) Electrical current SC (A) step speed controller 91367AA 91367AA 91367AA 91367AA Electronic speed controller 89903AA 89903AA 89903AA 89904AA Guarantee (years)

127 Controllers Dimensions (mm) Installation and Accessories Industrial Fan Controller XCW Electronic speed control Provides On/Off and infinitely variable speed control Fan operation indicator light Surface or recess mounting w160 x h86mm 5 Step Transformer Speed Controller Multi-tapped auto transformer giving 5 stepped speeds allowing accurate adjustment to suit site conditions Provides five speed and On/Off function Robust ISO casing IPX4 protected Dimensions (mm) Model ØA B ØC ØD ØE F G H XSCS x45º XSCS x45º XSCS x30º XSCS x30º XSCS x30º XSCS x22.5º XSCS x22.5º For ducted applications coupling flanges, mounting feet and anti-vibration mounts are recommended. These are supplied in the Short Case Axial Fan Xtras installation packs comprising of 2 steel matching coupling flanges, 2 flexible connectors, 4 worm drive clips, 2 mounting feet and 4 anti-vibration mounts. Cased Axial Installation Packs Fan size 315mm Ref AA 350mm Ref AA 400mm Ref AA 450mm Ref AA 500mm Ref AA 560mm Ref AA Typical Specifications on page 175. Wiring Diagrams on page 189. Control Details on page 154. Performance XSCS250 to 450 XSCS500 to 630 Static Pressure [Pa] XSCS XSCS XSCS XSCS XSCS XSCS Select the right product for your application XSCS XSCS XSCS XSCS XSCS XSCS XSCS XSCS Reference number 91578AA 91580AA 91575AA 91577AA 91579AA 91581AA 91583AA Fan blade diameter (mm) No. poles Nominal fan speed (rpm) Extract performance (FID, m 3 /s) 0Pa Pa Pa Pa Pa Pa Pa 1.72 Sound pressure level Max electrical power rating (W) Electrical current FLC (A) Electrical current SC (A) step speed controller 91369AA 91369AA 91367AA 91367AA 91367AA 91368AA 91368AA Electronic speed controller 89903AA 89903AA 89904AA 89904AA Guarantee (years) Static Pressure [Pa] XSCS XSCS XSCS XSCS XSCS Xpelair Scimitar XSCS Sickle blade short case fans

128 Xpelair Rapier XPMA Plate mounted axial fans Key features The Range Type: Application: Control options: Plate mounted axial Commercial/Industrial Electronic/Transformer speed control Xpelair Rapier is a new range of cast aluminium aerofoil blade section plate fans which now extends from 315mm to 710mm. The range has also been extended to include 4 and 6 pole versions. Rapier plate fans are suitable for wall mounting and short duct in larger areas in commercial, agricultural and high performance industrial installations including kitchens, factories, garages and warehouses. At the heart of the unit is a proven capacitor start and run Class F external rotor motor cast aluminium blade assembly. The wall plate with bellmouth entry is manufactured in pressed steel with a corrosion resistant powder coated finish. For safety the front is protected by a robust finger guard. All Xpelair Rapier fans are fully speed controllable. Models Select the right product for your application Aerofoil axial plate fan Plate and bellmouth - one piece galvanised pressing with corrosion resistant two stagepowder coat RAL 9005 finish. Steel fingerguard to EN 294 Impeller - aerofoil section cast aluminium Dynamically balanced to G6,3 ISO 1940 part 1for high performance, low noise Totally enclosed capacitor start and run IP54 external rotor motor Bearings are sealed for life Fully speed controllable except XPMA Class F insulation Safety thermal overload protection as standard with terminals provide for connection Can be installed at any angle. Suitable for ambient temperatures of -30 to +60ºC Supply V 50Hz XPMA XPMA XPMA XPMA XPMA XPMA XPMA Reference number 91540AA 91541AA 91543AA 91545AA 91547AA 91049AA 91546AA Fan blade diameter (mm) No. poles Nominal fan speed (rpm) Extract performance (FID, m 3 /s) 0Pa Pa Pa Pa Pa Pa Pa Pa 0.79 Sound pressure level Max electrical power rating (W) Electrical current FLC (A) Electrical current SC (A) step speed controller 91367AA 91367AA 91367AA 91368AA 91367AA 91367AA Electronic speed controller 89903AA 89903AA Guarantee (years)

129 Controllers Dimensions (mm) Installation and Accessories Industrial Fan Controller XCW Electronic speed control Provides On/Off and infinitely variable speed control Fan operation indicator light Surface or recess mounting w160 x h86mm 5 Step Transformer Speed Controller Multi-tapped auto transformer giving 5 stepped speeds allowing accurate adjustment to suit site conditions Provides five speed and On/Off function Robust ISO casing IPX4 protected Dimensions (mm) Model A B ØC ØD ØE F G H XPMA XPMA XPMA XPMA XPMA XPMA XPMA XPMA Xpelair XPMA fans can be installed at any angle. Installation through an outside wall should be with a finger guard if below 2.5m and suitable external weather protection. Either an external louvre type EG or a louvre shutter type XLS. XLS External Louvre Shutter XLS315 (XPMA315) Ref AA XLS350 (XPMA355) Ref AA XLS400 (XPMA400) Ref AA XLS450 (XPMA450) Ref AA XLS500 (XPMA500) Ref AA XLS670 (XPMA630) Ref AA Typical Specifications on page 175. Wiring Diagrams on page 188. Control Details on pages 154. Performance Select the right product for your application XPMA XPMA XPMA XPMA XPMA Reference number 91548AA 91549AA 91551AA 91050AA 91553AA Fan blade diameter (mm) No. poles Nominal fan speed (rpm) Extract performance (FID, m 3 /s) 0Pa Pa Pa Pa Pa 125Pa 150Pa 175Pa Sound pressure level Max electrical power rating (W) Electrical current FLC (A) Electrical current SC (A) step speed controller 91367AA 91367AA 91368AA 91368AA 91369AA Electronic speed controller 89903AA Guarantee (years) Xpelair Rapier XPMA Plate mounted axial fans

130 Xpelair Rapier XSCA Short case axial fans Key features The Range Type: Application: Control options: Short case axial Commercial/Industrial Electronic/Transformer speed control Xpelair XSCA is a high performance range of sixteen compact and efficient industrial aerofoil axial cased fans featuring external rotor motors and high pressure axial blade impellers. Suitable for medium pressure, low noise ducted applications in commercial, agricultural and high performance industrial installations including kitchens, factories, garages and warehouses. external rotor motor and die cast impeller assembly designed for high aluminium blade impeller assembly designed for high output performance with low noise. The casing is manufactured in galvanised steel with a corrosion resistant powder coated finish and the terminal box IP54 making it suitable for external applications. The units are fully speed controllable. At the heart of the XSCA range is a proven capacitor start and run Class F Models Select the right product for your application Casing: Compact and robust construction with corrosion resistant powder coat finish to RAL black Impeller: Die cast, high efficiency aerofoil blade design for high performance and low noise. Blades are dynamically balanced to ISO : Grade G 6.3 Motor: Totally enclosed capacitor start & run external rotor motor Insulation is to class F Bearings are sealed for life Fully speed controllable except XSCA Safety thermal overload protection as standard with terminals provided for connection Protected to IP54 Connection terminal box fitted to the outside of the case Can be wired for reverse operation (with reduction in performance) Suitable for ambient temperatures from -30ºC to +60ºC Supply voltage: V 50Hz XSCA XSCA XSCA XSCA XSCA XSCA Reference number 91584AA 91585AA 91587AA 91589AA 91591AA 91078AA Fan blade diameter (mm) No. poles Nominal fan speed (rpm) Extract performance (FID, m 3 /s) 0Pa Pa Pa Pa Pa Pa Pa Pa 0.78 Sound pressure level Max electrical power rating (W) Electrical current FLC (A) Electrical current SC (A) step speed controller 91367AA 91367AA 91367AA 91368AA 91367AA Electronic speed controller 89903AA Guarantee (years)

131 Controllers Dimensions (mm) Installation and Accessories Industrial Fan Controller XCW Electronic speed control Provides On/Off and infinitely variable speed control Fan operation indicator light Surface or recess mounting w160 x h86mm 5 Step Transformer Speed Controller Multi-tapped auto transformer giving 5 stepped speeds allowing accurate adjustment to suit site conditions Provides five speed and On/Off function Robust ISO casing IPX4 protected Dimensions (mm) Model ØA ØB ØC ØD E F G XSCA x45º 6 XSCA x45º 6 XSCA x30º 6 XSCA x30º 6 XSCA x30º 6 XSCA x22.5º 8 XSCA x22.5º 8 XSCA x22.5º 10 For ducted applications coupling flanges, mounting feet and anti-vibration mounts are recommended. These are supplied in the Short Case Axial Fan Xtras installation packs comprising of 2 steel matching coupling flanges, 2 flexible connectors, 4 worm drive clips, 2 mounting feet and 4 anti-vibration mounts. Cased Axial Installation Packs Fan size 315mm Ref AA 350mm Ref AA 400mm Ref AA 450mm Ref AA 500mm Ref AA 560mm Ref AA Typical Specifications on page 176. Wiring Diagrams on page 189. Control Details on pages 154. Performance Select the right product for your application XSCA XSCA XSCA XSCA XSCA XSCA Reference number 91590AA 91592AA 91593AA 91594AA 91595AA 91597AA Fan blade diameter (mm) No. poles Nominal fan speed (rpm) Extract performance (FID, m 3 /s) 0Pa Pa Pa Pa Pa 125Pa 150Pa 175Pa Sound pressure level Max electrical power rating (W) Electrical current FLC (A) Electrical current SC (A) step speed controller 91367AA 91367AA 91367AA 91368AA 91368AA 91369AA Electronic speed controller 89903AA 89903AA Guarantee (years) Xpelair Rapier XSCA Short case axial fans

132 Xpelair Rapier XRA Axial roof fans Key features The Range Type: Application: Roof fan and cowl Commercial/Industrial The XRA is a versatile range of six compact and efficient industrial roof axial fans featuring external rotor motors and high pressure axial blade impellers. rotor motor and blade impeller assembly designed to run efficiently with the minimum of noise. On all models the impellers are die cast aerofoil section. Control options: Electronic/Transformer speed control The fans are suitable for roof extract applications in commercial agricultural and high performance industrial installations including kitchens, factories, garages and warehouses. The cowl and base assemblies are made of tough and durable polymer that will resist exposure to ultraviolet light. Central to the XRA range is a proven capacitor start-and-run Class F external The plate, bellmouth entry and finger guard are manufactured in galvanised steel with a corrosion resistant powder coated finish and each of the units is fully speed controllable. As part of our desire to develop increasingly sustainable products the Xpelair XRA and XMV roof cowls are now 100% recyclable. Models Select the right product for your application Roof cowl and base are manufactured from fibreglass with a gloss UV stable finish Colour - goose wing grey Complete with integral birdguard Plate and bellmouth: one piece galvanised steel pressing with corrosion resistant powder coat finish. Robust steel fingerguard to EN 294 Impeller - die cast, high efficiency aerofoil bade design for performance and low noise. Blades are dynamically balanced to ISO : 1986 Grade G 6.3 Motor - totally enclosed capacitor start & run external rotor motor Bearings are sealed for life Fully speed controllable except XRA Insulation is to Class F Safety thermal overload protection as standard with terminals provided for connection. Protected to IP54 Connection terminal box IPX4 Suitable for ambient temperatures from - 30ºC to +60ºC Supply voltage: V 50Hz XRA XRA XRA XRA XRA XRA Reference number 91997AA 91998AA 91999AA 92000AA 92001AA 91340AA Fan blade diameter (mm) No. poles Nominal fan speed (rpm) Extract performance (FID, m 3 /s) Sound pressure level (db(a)@3m) Max electrical power rating (kw) Electrical current FLC (A) Electrical current SC (A) step speed controller 91367AA 91367AA 91368AA 91367AA 91368AA Electronic speed controller 89903AA Includes XRC roof cowl Guarantee (years, UK)

133 Controllers & Accessories Dimensions (mm) Industrial Fan Controller XCW Electronic speed control Provides On/Off and infinitely variable speed control Fan operation indicator light Surface or recess mounting w160 x h86mm 5 Step Transformer Speed Controller Multi-tapped auto transformer giving 5 speeds allowing accurate adjustment to suit site conditions Provides five speed and On/Off function Robust ISO casing IPX4 protected XRC Roof Cowls Without Fan XRC Ref AA XRC Ref AA XRC Ref AA XRC Ref AA XRC Ref AA Cowl and base manufactured in fibreglass with glass UV stable finish Colour - Goose wing Grey Suitable for air inlet or out applications See page 113 for cowl dimensions and curb details F C XRA Range A E D B MODEL A B C D E F G XRA XRA XRA XRA XRA XRA XRA XRA XRA XRA G Performance XRA single phase Typical Specifications on page 176. Wiring Diagrams on page 188. Control Details on pages 154. Static Pressure [Pa] XRA XRA XRA XRA XRA Airflow [m 3 /s] XRA Xpelair Rapier XRA Axial roof fans 133

134 Xpelair XMV Mixed flow vertical discharge roof fans Key features The Range Type: Application: Control options: Mixed flow roof Commercial/Industrial Starters/Transformer speed control The Xpelair roof mounted mixed flow vertical discharge roof XMV range is an ideal solution for the ventilation of high temperature applications up to 100 C, such as commercial kitchens, in-store bakeries, school kiln rooms and a wide range of industrial processes. overload protection and an integral service isolator. The tough mouldings are manufactured in High density polyethylene which is UV stabilised, resistant to all weather conditions down to -30 C and, to meet regulatory requirements, is 100% recyclable. Designed for horizontal installation on roofs, the XMV range features a unique high performance aluminium-polyamide mixed flow impeller and twin-wall casing design. This construction and a motor located out of the air-stream means it can be used with air-duct temperatures of up to 100 C. The XMV range is available in six diameters from 225mm to 500mm all with IP55 Class F motors, safety thermal By including a high velocity vertical discharge pattern in the design of the XMV range, Xpelair has minimised the risk of extracted air re-entering the building. Supply voltage: V 50Hz. As part of our desire to develop increasingly sustainable products the Xpelair XRA and XMV roof cowls are now 100% recyclable. Select the right product for your application XMV XMV XMV XMV XMV XMV XMV XMV XMV Reference number 91346AW 91347AW 91348AW 91349AW 91356AW 91357AW 91358AW 91359AW 91360AW Diameter (mm) or 6 pole Nominal fan speed Extract performance (m 3 /s) 0Pa Pa Pa Pa Pa Pa Pa Pa Pa Pa 500Pa Sound pressure level (db(a)@3m) Max electrical power (kw) Running current (A) step transformer (Ref.) 91367AA 91368AA 91368AA 91369AA 91367AA 91367AA 91367AA 91368AA 91368AA Starter (Ref.) 91372AA 91372AA 91372AA 91372AA 91372AA 91372AA 91372AA 91372AA 91372AA Weight (kg) Guarantee (years, UK)

135 Dimensions (mm) XMV Range Dimensions (mm) Model A B C D E F G XMV XMV XMV XMV XMV Typical Specifications on page 176. Wiring Diagrams on page 189. Performance XMV225 XMV250 XMV315 XMV450 XMV Xpelair XMV Mixed flow vertical discharge roof fans

136 Xpelair XID Centrifugal metal inline fans Key features The Range Type: Application: Control options: Metal inline Commercial/Industrial Speed control and humidity/pir sensing Inline duct systems have grown in popularity as a method of concealed ducted ventilation over the past two decades. The Xpelair XID inline range is engineered for trouble free operation, delivered complete with adjustable mounting brackets and terminal box. The practical, reliable fans are ideal for ducted applications in shops, schools, factories, offices, pubs, hotels, restaurants and kitchens. They are available in mm duct size diameters to suit any application. The range is manufactured in zinc coated corrosion resistant sheet metal with 30mm long spigot connections for ease of connection to ductwork. The range benefits from external rotor motor and impeller assemblies, whilst the connection box is easily accessible on top of the unit. The fan unit is speed controllable to offer flexibility and individual control. A full choice of ventilation accessories is available to complement this range to design a complete system. Models Compact and robust zintec steel construction Pressure developing, centrifugal inline fans suitable for extract or intake applications Extra length 30mm spigots Can be mounted at any angle using the universal mounting bracket supplied External rotor motor - totally enclosed and lubricated for life Insulation Class F. Fitted with safety thermal overload protection - protected to IPX4 Impeller is backward curved Supply voltage: V 50Hz Select the right product for your application XID100 XID125 XID150 XID200 XID250 XID315 Reference number 90101AA 90102AA 90103AA 90104AA 90208AA 90106AA Spigot diameter (mm) Extract performance (m 3 /s) 0Pa Pa Pa Pa Pa Pa Pa Pa 0.03 Sound pressure level (db(a)@3m) Max electrical power rating (W) Weight (kg) Guarantee (years, UK)

137 Controllers Dimensions (mm) Inline Fan Controller XIC1 Ref AW Slide switch provides fan On/Off control. Adjustable speed control for infinitely variable speeds. Complete with power On indicator light Typical Specifications on page 177. Wiring Diagrams on page 189. Control Details on pages Performance Remote Humidistat XRH Ref AW Stand alone humidistat switches fan On/Off when RH reaches pre-set levels. Complete with pullcord override switch Remote Time Controller DT20B Ref AW User adjustable run on timer (2-20mins) Passive Infrared Sensor XPIRA Ref AA Activates fan via body movement. Ideal for infrequently used public spaces Built in timer to prevent nuisance tripping XID Range Dimensions (mm) Model ØA B C D XID XID XID XID XID XID Installation and Accessories An extensive range of accessories are available to complete the installation of the Xpelair XID range of inline fans. The installation diagram shows a typical XID ducted installation and associated accessories. A B C D E F G Flexible ducting Spigot plate Wall duct External air operated louvre shutter Grille box Ceiling grille Worm drive clip F A E XID INLINE FAN SUSPENDED CEILING G B EXTERNAL WALL D C Xpelair XID Centrifugal metal inline fans 137

138 Xpelair XIDP Centrifugal plastic inline fans Key features The Range Type: Application: Control options: Plastic inline Commercial/Industrial Speed control and humidity/pir sensing Centrifugal inline fans provide the ideal ventilation solution for many exposed and high humidity applications. The Xpelair XIDP range is suitable for applications where the unit will be seen in wet areas such as kitchens, shower areas and a wide range of commercial situations. The XIDP range is based on the proven XID external rotor motor and impeller units to provide a range of high performance plastic inline fans. The moulded casing is designed to provide the best possible bellmouth entry, guide vanes and outlet. The wall thickness provides sound insulation and will not corrode. The case is both impact and fire resistant and a mounting foot is provided for fast and easy installation. Available in six popular sizes the range is compatible with Xpelair Xflex ducts and ventilation components. Models Pressure developing, centrifugal inline fans suitable for extract or intake applications Compact and robust polymer construction with integral terminal box and guide-vanes Can be mounted at any angle using the universal mounting bracket supplied External rotor motor - totally enclosed and lubricated for life Insulation Class F. Fitted with safety thermal overload protection - protected to IPX4 Impeller is backward curved centrifugal type Supply voltage: V 50Hz Impact and fire resistant casing Select the right product for your application XIDP100 XIDP125 XIDP150 XIDP200 XIDP250 XIDP315 Reference number 91383AA 91384AA 91385AA 91386AA 91387AA 91388AA Spigot diameter (mm) Extract performance (m 3 /s) 0Pa Pa Pa Pa Pa Pa Pa Sound pressure level (db(a)@3m) Max electrical power rating (W) Weight (kg) Guarantee (years, UK)

139 Controllers Dimensions (mm) Inline Fan Controller XIC1 Ref AW Slide switch provides fan On/Off control. Adjustable speed control for infinitely variable speeds. Complete with power On indicator light Typical Specifications on page 177. Wiring Diagrams on page 189. Control Details on pages Remote Humidistat XRH Ref AW Stand alone humidistat switches fan On/Off when RH reaches pre-set levels. Complete with pullcord override switch Remote Time Controller DT20B Ref AW User adjustable run on timer (2-20mins) Passive Infrared Sensor XPIRA Ref AA Activates fan via body movement. Ideal for infrequently used public spaces. Built in timer to prevent nuisance tripping XIDP Range Dimensions (mm) Model ØA B C D XIDP XIDP XIDP XIDP XIDP XIDP Performance Installation and Accessories An extensive range of accessories are available to complete the installation of the Xpelair XIDP range of inline fans. The installation diagram shows a typical XIDP ducted installation and associated accessories. A B C D E F G Flexible ducting Spigot plate Wall duct External air operated louvre shutter Grille box Ceiling grille Worm drive clip F A E XIDP INLINE FAN SUSPENDED CEILING G B EXTERNAL WALL D C Xpelair XIDP Centrifugal plastic inline fans 139

140 Xpelair XID & XIDP Centrifugal metal and plastic inline fans Installation and Accessories A C F Egg Crate Ceiling Grille CG Constructed from aluminium and can be used on ceilings or walls Finished in satin silver. Also available in white (see page 144) W200 x H200mm grille CG20 Ref AW W300 x H300mm grille CG30 Ref AW W450 x H450mm grille CG45 Ref AW W500 x H500mm grille CG50 Ref AW A Xflex Flexible Ducting (3 metre lengths) FD Complete with steel wire helix. Can be interlocked and sealed with duct tape to form an airtight seal 100mm diameter FD100 Ref AA 125mm diameter FD125 Ref AA 150mm diameter FD150 Ref AA 200mm diameter FD200 Ref AA 250mm diameter FD250 Ref AA 315mm diameter FD315 Ref AA Wall duct WD Length For bridging cavities or lining solid exterior walls 100mm duct diameter WD100 Ref AA 125mm duct diameter WD125 Ref AA 150mm duct diameter WD150 Ref AA 200mm duct diameter WD200 Ref AA 250mm duct diameter WD250 Ref AA 315mm duct diameter WD315 Ref AA D G Ceiling Diffuser Grille DG Aluminium construction and finished in white. Also available in satin silver (see page 144) W200 x H200mm grille DG20 Ref AW W300 x H300mm grille DG30 Ref AW W450 x H450mm grille DG45 Ref AW W500 x H500mm grille DG50 Ref AW W600 x H600mm grille DG60 Ref AW B Air Operated Louvre Shutter XLG External louvre shutter mounted to outside wall suitable for duct sizes 100mm diameter XLG100 Ref AA 120mm diameter XLG125 Ref AA 160mm diameter XLG150 Ref AA W200 x H200mm XLG200 Ref AA W250 x H250mm XLG250 Ref AA W315 x H315mm XLG315 Ref AA Spigot Plate SP Fixes to inside of exterior wall 100mm spigot diameter SP100 Ref AA 125mm spigot diameter SP125 Ref AA 150mm spigot diameter SP150 Ref AA 200mm spigot diameter SP200 Ref AA 250mm spigot diameter SP250 Ref AA 315mm spigot diameter SP315 Ref AA E Worm Drive Clips WDC For connecting lengths of flexible ductwork to spigots. Supplied in packs of mm - 125mm diameter WDC5 Ref AA 150mm 200mm diameter WDC8 Ref AA 250 mm 315mm diameter WDC13 Ref AA Grille Box GB Used in conjunction with egg crate ceiling grille and ceiling diffuser grille to connect to ductwork 100mm ducting diameter with 200 x 200mm grille GB20/100 Ref AA 125mm ducting diameter with 200 x 200mm grille GB20/125 Ref AA 150mm ducting diameter with 200 x 200mm grille GB20/150 Ref AA 200mm ducting diameter with 300 x 300mm grille GB30/200 Ref AA 250mm ducting diameter with 300 x 300mm grille GB30/250 Ref AA 315mm ducting diameter with 450 x 450mm grille GB45/315 Ref AA 315mm ducting diameter with 500 x 500mm grille GB50/315 Ref AA 315mm ducting diameter with 600 x 600mm grille GB60/315 Ref AA 140

141 Installation and Accessories Typical XID or XIDP inline ducted installation Additional Accessories Filter Box CFC GSM construction and 92% efficiency rating Filter material EU3 125mm duct diameter CFC125 Ref AA 150mm duct diameter CFC150 Ref AA 200mm duct diameter CFC200 Ref AA 250mm duct diameter CFC250 Ref AA 315mm duct diameter CFC315 Ref AA 400mm duct diameter CFC400 Ref AA Circular Silencer SIL GSM construction with leak free spigots 100mm duct diameter SIL100 Ref AA 125mm duct diameter SIL125 Ref AA 150mm duct diameter SIL150 Ref AA 200mm duct diameter SIL200 Ref AA 250mm duct diameter SIL250 Ref AA 315mm duct diameter SIL315 Ref AA Solid Duct Fastener XMK For connecting rigid ducting Anti vibration properties through foam lining Supplied in pairs 100mm duct diameter XMK100 Ref AA 125mm duct diameter XMK125 Ref AA 150mm duct diameter XMK150 Ref AA 200mm duct diameter XMK200 Ref AA 250mm duct diameter XMK250 Ref AA 315mm duct diameter XMK315 Ref AA Xpelair XID & XIDP Centrifugal metal and plastic inline fans 141

142 Xpelair Xpress XPRS High pressure mixed flow inline duct fans NEW XPRS200 XPRS250 XPRS355 Key features The Range Type: Application: Control options: Mixed flow inline Commercial/Industrial Speed control and humidity/pir sensing The New Xpelair Xpress range redefines inline fan performance to provide ultra high pressure development, volume and efficiency allowing smaller ductwork to be used than conventional inline fans. At the heart of the design is a dynamically balanced mixed flow impeller and bellmouth entry with minimised clearances to ensure optimum pressure development. Transferred though a meridian channel, the air then enters a static three dimensional guide vane. This dihedral twist retains a third of the pressure build up which would otherwise be lost. The air management is so efficient that air turbulence noise and vibration associated with centrifugal inline fans is virtually eliminated. For example an Xpress 250mm at 200Pa has a volume output double that of an equivalent size centrifugal inline fan and 50% higher than 315mm. This impressive performance means that smaller ducts can be chosen with an energy use lower than most DC fans of the same performance. Xpress is no bigger in diameter than the ductwork in which it is mounted. No flanges are required; simply flexible connections. It comes with its own mounting foot which is factory fitted to eliminate on site assembly. And the new Xpelair Xpress can be run at any angle. Space saving, smaller ductwork, quieter and costing less to run, the technically advanced Xpelair Xpress redefines inline performance. Models Cutaway of Xpress showing design of impellor and down stream guidevanes High pressure inline mixed flow fans Steel housing with bell mouth entry (XPRS200 is plastic) Mixed flow fabricated blade and hub assembly balanced to G2.5 ISO 1940 Continuously rated capacitor start and run motor with integrated thermal overload protection Matching aerofoil section guidevanes Integral mounting foot Terminal box to IP44 Voltage speed controllable Select the right product for your application XPRS200 XPRS250 XPRS315 XPRS355/1 XPRS355/2 Reference number 92358AA 91498AA 91499AA 91500AA 91501AA Extract performance (m 3 /s) Casing break out (db(a)@3m) Motor electrical power (W) Electrical current FLC (A) step transformer speed controller n/a 91367AA 31968AA 91367AA 91369AA Guarantee (years) Fan rpm Weight (kg)

143 Controllers Installation and Accessories 5 Step Transformer Speed Controller Multi-tapped auto transformer giving 5 speeds allowing accurate adjustment to suit site conditions Provides five speed and On/Off function Robust ISO casing IPX4 protected Solid duct fastners XMK 200 Ref AA 250 Ref AA 315 Ref AA Filter box CFC 200 Ref AA 250 Ref AA 315 Ref AA Backdraft shutter XBD 200 Ref AA 250 Ref AA 315 Ref AA Inline Duct Heater IDH 200 Ref AA 250 Ref AA 315 Ref AA Typical Specifications on page 177. Control Details on pages 154. Domestic Accessories on page Performance Dimensions (mm) A XPRS200 XPRS250 XPRS355 ØB XPRS315 Dimensions (mm) Model A ØB XPRS XPRS XPRS XPRS355/ XPRS355/ XPRS355+ Xpelair Xpress XPRS High pressure mixed flow inline duct fans 143

144 Xpelair MinimX C XCDF Compact inline duct fans Key features The Range Type: Application: Control options: Compact inline Commercial/Industrial Speed control and humidity/pir sensing In many ducted systems ceiling space can be severely restricted preventing the use of circular inline fans. The NEW Xpelair MinimX range of inline fans reduces the product height to a minimum, providing system design flexibility and easier installation. For ease of service inspection and cleaning the motor/fan unit swings out on a hinged access door. The precision made housing has integrated mounting flanges with key hole first-fit slots and an accessible terminal box for fast assembly and wiring. Available to suit the six most popular duct sizes, the Xpelair MinimX range features fully speed controllable two pole external rotor motors for use with matching speed controllers and auto sensor control options available. A full range of Xpelair Ventilation accessories allow the design of a complete system. Refer to pages Models Integral keyhole fixings for fast and easy installation Pressure developing low profile inline fans with hinged swing out door for periodic inspection/service access Available in six performance diameters Precision made, compact G.S.M construction Integral mounting flanges with first-fit key hole slots Continuously rated two pole external rotor motor/fan assemblies. Insulation Class F with thermal overload protection Bearings lubricated for life IP44 protection Terminal box with knock outs and one cable entry gland rated IP44 Select the right product for your application XCDF100 XCDF125 XCDF150 XCDF200 XCDF250 XCDF315 Reference number 91502AA 91503AA 91504AA 91505AA 91506AA 91507AA Extract performance (m 3 /s) Sound power level (db(a)@3m) Breakout (db(a)@3m) Motor electrical power (W) Electrical current SC (A) step transformer speed controller 91367AA 91367AA 91367AA 91367AA 91367AA 91367AA Electronic speed controller 89903AA 89903AA 89903AA 89903AA 89903AA 89904AA Guarantee (years)

145 Controllers Remote Humidistat XRH Ref AW Stand alone humidistat switches fan On/Off when RH reaches pre-set levels. Complete with pullcord override switch Remote Time Controller DT20B Ref AW User adjustable run on timer (2-20mins) Passive Infrared Sensor XPIRA Ref AA Activates fan via body movement. Ideal for infrequently used public spaces. Built in timer to prevent nuisance tripping Typical Specifications on page 178. Details of Controls/Sensors on page 155. Performance Dimensions (mm) Installation and Accessories A Louvred wall shutter XLG B Wall duct WD C Spigot plate SP D Xflex ducting E Grille box GB F Egg-crate grille CG E D F Dimensions (mm) Model ØA B C D E F G H I XCDF XCDF XCDF XCDF XCDF XCDF XCDF INLINE FAN C B A Xpelair MinimX C XCDF Compact inline duct fans 145

146 Xpelair LoSound C LQTC Attenuated inline fans Key features The Range Type: Application: Control options: Attenuated inline Commercial/Industrial Speed control and humidity/pir sensing The Xpelair LoSound range of attenuated inline fans consists of six models for use in ducted applications where high performance and low sound levels are required. Suitable for commercial and industrial applications such as schools, shops, offices, pubs and restaurants, the compact design allows easy installation above suspended ceilings or floor voids using the mounting points provided. The high performance, low noise level motor combined with a cabinet lined on four sides with 40mm sound absorbent material makes LoSound range particularly suitable where low sound operating levels are necessary. All models can be installed with the covers upwards or inverted. The Xpelair LoSound range is suitable for ambient temperatures up to 40ºC. Optional speed controller is available. Models Galvanised sheet metal casing with integral keyhole fixing points The casing is lined on four sides with 40mm faced attenuation material The unit is provided with a removable cover with quick release catches for periodic inspection and cleaning External rotor motor and forward curved centrifugal fan assembly dynamically balanced in two planes. The motor is maintenance free with sealed for life bearings, and integral thermal overload protection The IP44 capacitor start and run motor is rated for continuous running Class B motor A 3m three core flexible cord is provided with the unit Select the right product for your application LQTC125 LQTC150 LQTC200 LQTC250 LQTC315 LQTC355 Reference number 91989AA 91990AA 91991AA 91992AA 91993AA 91994AA Extract performance (m 3 /s) Sound pressure level (db(a)@3m) Sound breakout (db(a)@3m) Motor electrical power (W) Electrical current SC (A) step transformer speed controller 91367AA 91367AA 91367AA 91367AA 91368AA 91369AA Guarantee (years)

147 Controllers 5 Step Transformer Speed Controller Multi-tapped auto transformer giving 5 speeds allowing accurate adjustment to suit site conditions Provides five speed and On/Off function Robust ISO casing IPX4 protected TI-1.5A Ref.91367AA TI-3.5A Ref.91368AA TI-6A Ref.91369AA Typical Specifications on page 178. Performance Dimensions (mm) Installation and Accessories An extensive range of accessories are available to complete the installation of the Xpelair LoSound C Range of inline centrifugal fans. Xflex FD Worm drive clips WDC Grille box GB Egg crate ceiling grille CG Ceiling diffuser grille DC Circular silencer SIL Inline duct heater IDH Air operated louvre shutter XLG Spigot plate SP Wall duct WD Flexible connector FCC For details refer to pages Dimensions (mm) Model ØA B C D E F G H I J LQTC LQTC LQTC LQTC LQTC LQTC Xpelair LoSound C LQTC Attenuated inline fans

148 Xpelair CubeX CMAX CBXC Versatile attenuated inline fans Key features The Range Type: Application: Control options: Versatile attenuated inline Commercial/Industrial Speed control and humidity/pir sensing Where higher general ventilation duties are required the new Xpelair CubeX range provides a flexible solution designed with a choice of duct sizes. Installed in offices, commercial buildings, public areas, the leisure industry and industrial applications. Xpelair CubeX models combine high performance backward curved centrifugal inline fans with sound attenuation and robust steel housings. Each model is available with a choice of two spigot sizes to suit duct design. The range is available in four sizes with a choice of two spigot sizes for each ranging from 315mm to 450mm. A full range of Xpelair ventilation accessories is available. Models Backward curved centrifugal impeller and external rotor motor assembly with maintenance free long life bearings Thermal contacts connected to terminals Full motor protection through external tripping device Rigid frameless sheet metal construction Galvanised double skin casing with 40mm insulation Includes condensation drain facility V single phase CubeX spigot options Select the right product for your application CBXC280S315 CBXC280S355 CBXC315S315 CBXC315S355 CBXC355S315 CBXC355S355 CBXC400S400 CBXC400S450 Reference number 91508AA 91509AA 91510AA 91512AA 91513AA 91514AA 91515AA 91516AA Spigot size (mm) Extract performance (m 3 /s) Sound pressure level (db(a)@3m) Max electrical power rating (W) Electrical current SC (A) Electrical current FLC (db(a)@3m) n/a n/a n/a n/a n/a n/a 5 step transformer speed controller 91369AA 91369AA 91369AA 91369AA 91367AA 91367AA 91368AA 91368AA Guarantee (years) Insulation Class F 148

149 Controllers 5 Step Transformer Speed Controller Multi-tapped auto transformer giving 5 speeds allowing accurate adjustment to suit site conditions Provides five speed and On/Off function Robust ISO casing IPX4 protected Installation and Accessories An extensive range of accessories are available to complete the installation of the Xpelair CubeX CMAX Range of inline centrifugal fans. Solid duct fastener XMK Backdraft shutter XBD Filterbox CFC Xflex ALU Typical Specifications on page 178. Remote Sensors on page 154. Full Range of Ancillaries on pages Performance Volume (C.M.F.) Static Pressure [Pa] Airflow [m 3 /s] Dimensions (mm) CBXC280 CBXC355 CBXC315 CBXC400 Dimensions (mm) Model A B C ØD CBXC280S CBXC280S CBXC315S CBXC315S CBXC355S CBXC355S CBXC400S CBXC400S Xpelair CubeX CMAX CBXC Versatile attenuated inline fans

150 Xpelair HiFlo CMAX XSFA Attenuated inline fans Key features The Range Type: Application: Control options: Attenuated inline Commercial/Industrial Electronic/Transformer speed control The Xpelair HiFlo XSFA range of attenuated inline fans is a nine model line up of fans for use in ducting applications where high performance and low sound levels are required. Suitable for light commercial and industrial applications such as schools, shops, sports complexes, offices, pubs and restaurants, the compact design of the range allows the fans to easily be accommodated above a suspended ceiling or floor void using the mounting points provided. The high performance, low noise level motor, combined with a cabinet lined with fire rated sound absorbing material makes XSFA units particularly suitable where low sound operating levels are critical. All models can be mounted with the cover upwards or inverted. The HiFlo range is suitable for ambient temperatures from 30 C to +50 C and an optional range of speed controllers and sensors are available. Models Select the right product for your application High performance pressure developing inline fan suitable for extract or input applications using circular ductwork Fan housing manufactured in G.S.M with acoustic sound absorbing material to Class 0 fire rated to BS 476 parts 6 and 7 to minimise noise break-out 50mm deep connection spigots Insulation class B & F Motors - Direct drive, double inlet, forward curved centrifugal fan / scroll assembly Continuously rated capacitor start and run motor with sealed for life bearings and safety thermal overload protection Metal impeller balanced to ISO : 1986 grade G 6.3 IP54 terminal box Fans are easily disconnected from a mounting plate for cleaning Integral fixing slots (23 x 11mm) on each side of cabinet Supply voltage: V 50Hz XSFA100 XSFA125 XSFA150 XSFA200 XSFA250 XSFA315/1 XSFA315/2 XSFA400/1 XSFA400/2 Reference number 91389AA 91390AA 91391AA 91392AA 91393AA 91394AA 91395AA 91396AA 91397AA Spigot diameter (mm) Extract performance (m 3 /s) 0Pa Pa Pa Pa Pa Pa Pa Pa Pa Nominal fan speed (rpm) Sound pressure level (db(a)@3m) Motor electrical power (W) Electrical current FLC (A) Electrical current SC (A) Motor insulation class B B B B F F B B F Weight (kg) step transformer speed controller 91376AA 91367AA 91367AA 91367AA 91368AA 91368AA 91368AA 91368AA 91370AA Guarantee (years, UK)

151 Controllers Dimensions (mm) Inline Fan Controller XIC1 Ref AW Slide switch provides On/Off control. Adjustable speed control for infinitely variable speeds. Complete with power On indicator light 5 Step Transformer Speed Controller Multi-tapped auto transformer giving 5 speeds allowing accurate adjustment to suit site conditions Provides five speed and On/Off function Robust ISO casing IPX4 protected Typical Specifications on page 179. Remote Sensors on pages 154. Dimensions (mm) Model A B C ØD XSFA XSFA XSFA XSFA XSFA XSFA315/ XSFA315/ XSFA400/ XSFA400/ Performance Static Pressure [Pa] Volume (C.M.F.) XSFA100 XSFA125 XSFA150 XSFA200 XSFA250 XSFA315/ Airflow [m 3 /s] Installation 151 XSFA315/2 XSFA400/1 XSFA400/2 Xpelair HiFlo CMAX XSFA Attenuated inline fans

152 Xpelair ManCoolers Commercial and industrial cooling fans NEW ManCooler Trapeze Key features The Range Type: Application: Air re-circulation Commercial/Industrial Building sites With more unpredictable fluctuations in our weather the need for temporary solutions to deal with temperature extremes has never been more relevant. Xpelair portable ManCoolers are an ideal spot cooling solution. The ManCooler range of commercial and industrial air coolers are ideal for use in areas such as factory assembly lines, steelworks, factory moulding areas, hospitality marquees, and general movement applications in large areas. The range has also been designed to be used for drying outbuildings and equipment after flood damage. Xpelair ManCoolers can fulfil a wide range of duties in industry and the public sector. An effective and reliable answer where even large quantities of air are required quickly, the ManCooler range comes complete with their own robust stand and are easy and quick to set up. The adjust-and-lock head allows the units to be tilted for maximum benefit. For more permanent applications, or where floor space is at a premium the Xpelair Trapeze model is ideal for suspension at high level. Trapeze units are also ideal for reaching unventilated corners of otherwise still air on large sites. Or forcing hot air to ground level. Select the right product for your application ManCooler Trapeze MC350 MC400 MC V MC450 MC560 TP450 Reference number 91408AA 91409AA 92309AA 91410AA 91411AA 91412AA Fan diameter (mm) Extract performance (FID, m 3 /s) Nominal fan speed (rpm) Sound pressure level (db(a)@3m) Voltage (V) Electrical power rating (W) Electrical current FLC (A) Weight (kg) Guarantee (years, UK)

153 Models ManCooler MC350 Ref AA MC400 Ref AA MC V Ref AA MC450 Ref AA MC560 Ref AA Portable commercial cooling fans in four sizes Powder coated fan housing Angle adjustable and lock Tubular steel frame Safety finger guards to DIN (UNE ) fitted inlet and outlet Continuously rated totally enclosed maintenance free motor with sealed for life bearings IP55 IP55 connection box with On/Off switch Suitable for ambient temperatures up to 40ºC Supply voltage: V 50Hz 110V - MC V Trapeze TP450 Ref AA Suspended air circulation unit 460mm fan diameter For horizontal or vertical suspension The distance of the fan to the floor should be no less than 2700mm Stainless steel construction Continuously rated totally enclosed maintenance free motor with sealed for life bearings Protected to IP55 IP55 connection box Four suspension eyes Suitable for ambient temperature up to 40ºC Supply voltage: V 50Hz Typical Specifications on page 179. Performance ManCooler MC350 ManCooler MC450 Dimensions (mm) ManCooler ManCooler MC400 ManCooler MC560 Dimensions (mm) Model A B C D E F MC MC MC V MC MC Trapeze Xpelair ManCoolers Commercial and industrial cooling fans 153

154 Xpelair Industrial Controllers & Accessories Electronic Speed Controller SXCW 1AMP XCW1.1 Ref AA 3AMP XCW1.3 Ref AA 6AMP XCW1.6 Ref AA Electronic speed control Provides On/Off and infinitely variable speed control Fan operation indicator light Surface or recess mounting w160 x h86mm Inline Fan Controller XIC1 Ref AW Suitable for use with all models. Slide switch provides: On/Off Adjustable control for infinitely variable speed Power On' indicator light Surface or recess mounting Colour: white w160 x h86mm 5 Step Transformer Speed Controller T1/T3 Single phase T1-1.5A Ref AA IP54 T1-3.5A Ref AA IP54 T1-6A Ref AA IP54 T1-7.5A Ref AA IP54 T1-12A Ref AA IP21 3 phase T3-1A Ref AA IP54 T3-2A Ref AA IP54 T3-3A Ref AA IP54 T3-5.2 Ref AA IP54 T3-7A Ref AA IP21 T3-14A Ref AA IP21 In single and 3 phase suitable for speed control of all speed controllable fans Robust light grey ISO sealed casing Rotary switch Fully impregnated transformer ISO class II, T40 E conforms to VDE 0550 Max. ambient Temp. +40ºC Automatic reconnection after mains failure Integrated status signal lamp Surface mounting Dimensions of 5 Step Auto Transformers Dimensions (mm) Model A B C T1-1.5A T1-3.5A T1-6A T1-7.5A T1-12A T3-1A T3-2A T3-3A T T3-7A T3-14A

155 Starter and Thermal Overload Protection STP STP1 Single phase A Ref AA STP3 3 phase A Ref AA For single phase fans with thermal contact leads wired to a terminal block and single speed three phase fans with thermal contacts. Used with motors of higher performance where the thermal contacts or PTC thermistors are wired to the terminal block and must be connected to a motor protection device On/Off push button operations. Manual reset after failure (not after power loss) Volts free contact for connection of alarm IP55 enclosure Surface mounting w80 x h150 x d98mm Remote Humidistat XRH Ref AW Stand alone humidistat switches On when RH rises to preset level and Off when it declines Fan operation indicator Pullcord operated override switch Surface or recess mounting White finish Supply voltage V 50Hz w160 x h86 x d41mm Amp inductive load 240V AC Time Delay Controller DT20B Ref AW Usually connected to the lighting circuit. Fan switches On with the light. Provides continued ventilation run-on period after the light has been switched Off User adjustable up to 20min Surface or recess mounting White finish Supply voltage V 50Hz w100 x h86 x d45mm Delay timer period 30 secs - 20 mins Amp inductive load 240V AC Passive Infrared Sensor XPIRA Ref AA For indoor use Automatically switches a fan on when body movement is detected Incorporates a delay timer details Supply voltage V 50Hz Used with: Premier DX200, DX400, DX100, CMF, CX10, GX6 w86 x h86mm Amp inductive load 230V AC 50/60Hz Air Quality Sensor AQS Ref AW Provides fully automatic control Detects contaminants such as cigarette smoke, body odours, toilet odours and cooking smells Activates ventilation system when preset threshold level is exceeded Can control up to six fans and accessories Integral timer adjustable from 3-30 mins LED status indicator Surface or recess mounting Supply voltage V 50Hz w160 x h86 x d41mm Amp inductive load 240V AC Alarm connection has maximum inductive load of AC Xpelair Industrial Controllers & Accessories

156 Xpelair Industrial Controllers & Accessories External Louvre Grilles EG Duct size EG30 300x300mm Ref AA EG45 450x450mm Ref AA EG50 500x500mm Ref AA EG67 670x670mm Ref AA Weather resistant recess mounting fixed louvre grille for exterior walls Aluminium construction Fitted birdguard Air Operated Louvre Shutters XLS Duct size XLS x315mm Ref AA XLS x350mm Ref AA XLS x400mm Ref AA XLS x450mm Ref AA XLS x500mm Ref AA XLS x670mm Ref AA Aluminium construction Fixed to outside of exterior wall Air operated Use with: XPM Air Operated Louvre Shutters XLG Hole diameter XLG mm dia Ref AA XLG mm dia Ref AA XLG mm dia Ref AA XLG x200mm Ref AA XLG x250mm Ref AA XLG x315mm Ref AA XLG x400mm Ref AA Plastic construction Fixed to outside of exterior wall Air operated Colour: white Egg-Crate Ceiling Grilles CG Duct size SATIN SILVER CG20 200mm Ref AA CG30 300mm Ref AA CG45 450mm Ref AA CG50 500mm Ref AA CG60 600mm Ref AA Square WHITE CG20 200mm Ref AW CG30 300mm Ref AW CG45 450mm Ref AW CG50 500mm Ref AW Can be used on ceilings or internal walls as an extract grille with large free area Aluminium construction Fixing screws provided (not size 600) Use will grille boxes and Xflex ducting Colours: Satin silver or white Ceiling Diffuser Grilles DG Duct size SATIN SILVER DG20 200mm Ref AA DG30 300mm Ref AA DG45 450mm Ref AA DG50 500mm Ref AA DG60 600mm Ref AA Square WHITE DG20 200mm Ref AW DG30 300mm Ref AW DG45 450mm Ref AW DG50 500mm Ref AW DG60 600mm Ref AW For air input systems terminating at ceilings and internal walls Adjustable grille vanes to set up direction of airflow for a particular area Fixing screws provided (not size 600) Use with grille boxes and Xflex ducting Aluminium construction Colours: Satin Silver or White Air Volume Dampers AVD Square AVD20 200mm Ref AA AVD30 300mm Ref AA AVD45 450mm Ref AA AVD50 500mm Ref AA Clips directly to an eggcrate grille or ceiling diffuser grille to adjust the volume of air entering or leaving the room Lever adjustment Depth 44mm Used together with Grille Box and Xflex ducting Material: Aluminium Mill finish 156

157 Grille Box GB Duct Dia Square GB20/ mm 200mm GB20/ mm 200mm GB20/ mm 200mm GB30/ mm 300mm GB30/ mm 300mm GB45/ mm 450mm GB50/ mm 500mm GB60/ mm 600mm Ref AA Ref AA Ref AA Ref AA Ref AA Ref AA Ref AA Ref AA Used in conjunction with egg-crate ceiling grille and ceiling diffuser grille to connect to ductwork Use Xflex FD or TFD to attach to spigot and secure with worm drive dip Grille box depth 97mm Flange size 18mm Four Way Ceiling Diffusers FW Spigot Plate/Damper FWS To fit square Diffuser Spigot duct size Square Dia FW x225mm Ref AA FWS mm 150mm Ref AA FWS mm 200mm Ref AA FW x300mm Ref AA FWS mm 250mm Ref AA FW x350mm Ref AA FWS mm 300mm Ref AA FW x400mm Ref AA FWS mm 400mm Ref AA FW x450mm Ref AA FWS mm 400mm Ref AA FW x500mm* Ref AA *outer frame dim. 600x600 Rigid lightweight polypropylene frame Four drop-in diffuser cassette can be set up for angled or downward diffusion Each cassette can be fitted eight ways providing multi directional air patterns Secret fixings adjust to varying plasterboard and tile thickness without surface screws Largest size drops into 600x600 mm ceiling grid system Interlock with four way diffusers Sloping spigot and barbs for easy duct attachment Built-in air volume damper in spigot sizes up to 300mm Wall Mounting Bracket WMB Ref AA Strong G.S.M construction Sold in pairs For use with XSFA Short Case Axial Fan Xtras SCX Fan size SCX315 (XSCA315) Ref AA SCX350 (XSCA350) Ref AA SCX400 (XSCA400) Ref AA SCX450 (XSCA450) Ref AA SCX500 (XSCA500) Ref AA SCX560 (XSCA560) Ref AA Installation pack comprising of: 2 steel matching coupling flanges 2 flexible connectors 4 worm drive clips 2 mounting feet 4 anti-vibration mounts Flexible Connection FCC Duct dia FCC1 125mm Ref AA FCC2 150mm Ref AA FCC3 200mm Ref AA FCC4 250mm Ref AA FCC5 315mm Ref AA FCC6 400mm Ref AA For reduction of vibration in a ducting system 150mm length Neoprene rubber collar stitched to female metal bands Xpelair Industrial Controllers & Accessories

158 Xpelair Industrial Controllers & Accessories Flexible Ducting Xflex FD Dia Length FD mm 3m Ref AA 6m Ref AA FD mm 3m Ref AA 6m Ref AA FD mm 3m Ref AA 6m Ref AA FD mm 3m Ref AA 6m Ref AA FD mm 3m Ref AA 6m Ref AA FD mm 3m Ref AA 6m Ref AA Glass fibre fabric on a PVC coated close pitch steel wire helix. 54 minute fire integrity from within as measured to BS 476: Part 20 - (1987) Can be interlocked and sealed with duct tape to form an airtight seal Attached to spigots using worm drive clips New Aluminium Flexible Ducting Xflex ALU Dia Length ALU mm 10m Ref AA ALU mm 10m Ref AA ALU mm 10m Ref AA ALU mm 10m Ref AA ALU mm 10m Ref AA ALU mm 10m Ref AA ALU mm 10m Ref AA Tough aluminium foil construction on a high strength wire helix Over 40 minute fire rating BS 476: Part 20 (1987) Can be interlocked and sealed with duct tape to form an airtight seal Attached to spigots using worm drive clips Thermal Flexible Ducting Xflex TFD Dia Length TFD mm 5m Ref AA 10m Ref AA TFD mm 5m Ref AA 10m Ref AA TFD mm 5m Ref AA 10m Ref AA TFD mm 5m Ref AA 10m Ref AA TFD mm 5m Ref AA 10m Ref AA TFD mm 5m Ref AA 10m Ref AA Double skinned insulated aluminium duct with high density fibreglass insulation to minimise condensation formulation 25 minute fire integrity from within as measured to BS 476: Part 20 - (1987) Can be interlocked and sealed with duct tape to form an airtight seal Attached to spigots using worm drive clips Solid Duct Fasteners XMK Duct dia XMK mm Ref AA XMK mm Ref AA XMK mm Ref AA XMK mm Ref AA XMK mm Ref AA XMK mm Ref AA XMK mm Ref AA For connecting XID and XIDP fans to rigid ductwork Supplied in pairs Metal clamping band with vibration absorbent foam Y Piece Splitters YPS Duct dia YPS1 100x100x100mm Ref AA YPS13 100x100x125mm Ref AA YPS2 100x100x150mm Ref AA YPS3 125x125x125mm Ref AA YPS4 125x125x150mm Ref AA YPS5 150x150x150mm Ref AA YPS6 150x150x200mm Ref AA YPS7 200x200x200mm Ref AA YPS8 200x200x250mm Ref AA YPS9 200x200x300mm Ref AA YPS10 250x250x250mm Ref AA YPS11 250x250x300mm Ref AA YPS12 300x300x300mm Ref AA Fire retardant ABS moulded splitters Leading lip for improved fixing to flexible ducting Space saving two component construction Backdraught Shutters XBD Duct dia XBD mm Ref AA XBD mm Ref AA XBD mm Ref AA XBD mm Ref AA XBD mm Ref AA XBD mm Ref AA XBD mm Ref AA G.S.M construction Spring loaded flaps For use with XID, XIDP and cabinet fans Fits between two lengths of ducting which are secured to the outside with worm drive clips when using Xflex FD ducting or with solid duct fasteners for solid ducting 158

159 Circular Silencers SIL Duct dia Length Dia (mm) (mm) (mm) SIL Ref AA SIL Ref AA SIL Ref AA SIL Ref AA SIL Ref AA SIL Ref AA For use with all circular duct systems For rigid ductwork the spigot incorporates a duct seal for leak free construction G.S.M construction. Inline Electric Duct Heaters IDH Watts Airflow Dia (m 3 /s) (mm) IDH Ref AA IDH Ref AA IDH Ref AA IDH Ref AA IDH Ref AA IDH Ref AA IDH Ref AA IDH Ref AA Built in manual reset thermal cutout for added safety G.S.M sleeve For use with rigid or flexible ductwork Connection box on top of unit Sheathed heating element All duct heaters 400mm long Duct heater height equals dia + 46mm On/Off operation Suitable for 240V/IPH/50Hz Electrical supply Bag Filter Cassettes CFC Duct dia Box square CFC mm 155mm Ref AA CFC mm 180mm Ref AA CFC mm 230mm Ref AA CFC mm 280mm Ref AA CFC mm 345mm Ref AA CFC mm 430mm Ref AA G.S.M construction Simple but effective inline filtration Filter medium EU3 92% efficient to BS 2831 number 2 test All filter boxes are 130mm deep Lid secured by screw on 2 sides Circular Air Valves CAV Dia CAV mm Ref AA CAV mm Ref AA CAV mm Ref AA Valve has adjustable centre disc Multi inlets/outlets for XID100, XID125 and XID150 Flexible ducting (FD) can be terminated at the valve Must be controlled via a suitable fan electric control device complete with thermal overload protection and run-on-timer. To eliminate any possibility of fire especially when fan speed controllers are used. NEW Circular Air Valve with Fire Damper Dia CAV125FD 125mm Ref AA Valve includes built in fire damper for use in kitchens Valve has adjustable centre disc and can be used as outlet for XID125 and Xplus Tested to BS476 Part 20 - provides 1 hour fire check Worm Drive Clips WDC For connecting lengths of flexible ductwork to spigots. Supplied in packs of mm - 125mm diameter WDC5 Ref AA 150mm 200mm diameter WDC8 Ref AA 250 mm 315mm diameter WDC13 Ref AA Xpelair Industrial Controllers & Accessories

160 Xpelair Typical Specification Xpelair Premier DX180, DX200 & CF20 The unit is to be supplied from the Xpelair Premier range by Applied Energy Products Ltd, Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model DX180* DX180T* DX180H* DX200 DX200T CF20 CF20T Ref 91181AW 91182AW 91183AW 91013AW 91014AW 91015AW 91016AW *IPX4 rated The unit shall be designed for flush or surface mounting in walls, ceilings or through glass (using the GMK kit) supplied complete with fixing clamps for flush mounting CF20 models shall be supplied with outside grille DX200 models shall have selectable speed running facility with speed selection at installation DX200T shall have an adjustable overrun timer (30s - 20min) with 2min start delay CF20 shall have automatic operation through integral humidity sensor, manual boost speed via pullcord and trickle ventilation CF20T shall have automatic operation through integral humidity sensor, manual boost speed via pullcord and trickle ventilation. Adjustable overrun timer (30s - 20min). Optional 2 min start delay. It shall be possible to remotely select speeds using Xpelair switch Ref AW The unit shall be BEAB approved and rated at IPX5. The fan shall conform to Building Regulations for use in toilets, bathrooms and utility rooms. The fan shall incorporate an automatic air operated backdraught shutter The unit shall be suitable for zone 1 and zone 2 requirements as defined by IEE Wiring Regulations 16th Edition BS 7674:2001 A rectangular cut out section shall be provided in the top of the fan housing to connect to Xpelair Profile kit Ref AA The housing and stylish air inlet shall be moulded in high gloss white ABS The front cover shall be held in position by the retaining clips to facilitate removal and adjustment The motor shall be totally enclosed, fitted with sealed self aligning maintenance free bearings and include thermal overload protection Dimensions shall be W x H x D 222 x 252 x 118mm excluding spigot Xpelair Premier LoVolt LVDX200 & LVCF20 The unit is to be supplied from the Xpelair Premier range by Applied Energy Products Ltd, Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model LVDX200 LVDX200T LVCF20 LVCF20T Ref 91453AW 91040AW 91041AW 91042AW The unit shall be 12V Safety Extra Low Voltage with a separate SELV transformer The unit shall be designed for surface or flush mounting using the fixing clamps provided, in walls, ceilings or mounting through glass using the GMK kit The fan shall incorporate an air operated backdraught shutter. A rectangular cut out section shall be provided to connect to Xpelair Profile 29 flatduct using Xpelair kit Ref AA LVCF20 models shall be supplied with an outside grille LVDX200 shall be operated by a proprietary remote switch or sensor LVDX200T shall have an adjustable overrun timer (30sec-20mins) with 2 min start delay LVCF20 shall have automatic operation through integral humidity sensor, manual boost speed via pullcord and trickle ventilation LVCF20T shall have automatic operation through integral humidity sensor, manual boost speed via pullcord and trickle ventilation. Adjustable overrun timer (30sec-20min). 2 min start delay The unit shall be BEAB approved and rated at IPX5. The fan shall conform to Building Regulations for use in toilets, bathrooms and utility rooms The unit shall be suitable for zone 1 and zone 2 requirements as defined by IEE Wiring Regulations 16th Edition BS 7674:2001 The housing and stylish air inlet shall be moulded in high gloss white ABS The front cover shall be held in position by the retaining clips to facilitate removal and adjustment The motor shall be maintenance free, totally enclosed, fitted with sealed self aligning bearings and thermal overload protection Dimensions shall be W x H x D 222 x 252 x 118mm excluding spigot Xpelair Premier LVCF20T DC The unit is to be supplied from the Premier UltraDC range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Ref Premier LVCF20T DC 92288AW 160 The unit shall be suitable for use as an intermittent fan in bathrooms and WCs or as a decentralised continuous extract unit for kitchens, utility rooms, bathrooms and WCs in accordance with the requirements of Building Regulations Part L1 The unit shall be fitted with an UltraDC low energy external rotor motor with maintenance free greased for life bearings The unit shall be suitable for use in the splash zone of a bath or shower identified as Zone 1 in the IEE regulations 16th edition. A separate SELV transformer shall be supplied with the unit which shall be installed outside of Splash zones 1 and 2 The unit shall be rated at IPX5 The fan shall be designed for flush or surface mounting on walls or ceiling and shall be fitted with an automatic air operated backdraught shutter The housing and air inlet fascia shall be moulded in high gloss ABS The front cover shall be held in position by two retaining clips to facilitate removal Dimensions: W x L x H 222 x 252 x 118 excluding spigot

161 Xpelair Premier CF20/40T CV The unit is to be supplied from the Premier UltraCV range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model CF20/40T UltraCV Ref 92293AW The unit shall feature UltraEC technology reducing energy use and providing longer motor life The motor shall be of external rotor construction with sealed, maintenance free bearings and include safety thermal overload protection A choice of installation performances shall be available to meet the installed performance requirements of Building Regulations Part F1- intermittent ventilation in Kitchens, Utility rooms, Bathrooms and Sanitary accommodation; Humidity controlled intermittent ventilation with manual override in Kitchens and Bathrooms and continuous decentralised ventilation in Kitchens, Utility rooms, Bathrooms and Sanitary accommodation Performance shall be set by the installer by way of installer accessible dip switches For internal rooms, the Timer when selected shall be factory set at 15 minutes in accordance with Part F1 but shall be installer adjustable up to 20 minutes (minimum period shall be 20 seconds) There shall be a 'Quick visit' timer feature preventing nuisance tripping if the room is occupied for less than 2 minutes The fan shall have a constant volume feature which maintains the chosen performance irrespective system pressure up to 100Pa The unit shall be designed for flush or surface mounting in walls or ceilings using the accessories provided An external grille shall be supplied with the fan The unit shall be rated at IPX5 making it suitable for use in the splash zone 1 of a bath or shower The fan housing shall be moulded in high gloss ABS with the air inlet discreetly concealed behind a baffle to the front cover The front cover assembly shall be held in position by clips to facilitate ease of removal for fan adjustment A balanced impeller shall be integral with the motor assembly The fan shall be rated at /60Hz Overall dimensions W x H x D 252 x 300 x 156mm excluding spigot Xpelair Profile 29 The components are to be supplied from the Xpelair Profile 29 range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Ref Premier flat ducting adaptor 90547AA Straight duct 2m 91106AA Horizontal 45 bend 91109AA Horizontal 90 bend 91108AA Vertical 45 bend 91111AA Vertical 90 bend 91110AA Round to rectangular adaptor 91113AA Xpelair DX100 The unit is to be supplied from the Xpelair DX100 range by Applied Energy Products Ltd, Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Ref DX AW DX100PC 90840AW DX100T 90841AW DX100H 90842AW DX100HP 90843AW DX100PIR* 90844AW *IPX4 rated Model Elbow bend/plenum Long airbrick adaptor Universal support clip Duct connector Airbricks horizontal terracotta white brown Cotswold stone Soldier course* 100mm telescopic wall tube *terracotta The unit shall be designed for wall, ceiling, shaft (or window mounting in glass up to 6mm thick) using the kit provided. An air operated backdraught shutter shall be included The fan housing shall be moulded in high gloss white ABS and be of modern design with finger guarding for additional safety protection The motor shall be lubricated for life with built in safety thermal overload protection The unit shall be rated at IPX5 Ref 91112AA 91102AA 91114AA 91107AA 91103AA 91126AA 91127AA 91128AA 91246AA 91247AA Profile 29 system components shall be used in conjunction with Premier DX200 and CF20 models The system shall use a XFD kit to connect to the fan with further components appropriate for the application The outer dimensions shall be w234 x h29mm and have a cross sectional area of 5630mm 2 Xpelair Profile 29 shall be manufactured in self extinguishing flame retardant PVC conforming to DIN 4102 B1 and UL94 V2 In addition it shall conform to Building Regulations for use in toilets and bathrooms Dimensions shall be W x H x D 165 x 155 x 43mm excluding spigot PC - Pullcord T - Timer (2-20mins) H - Humidistat control (50-90%RH) HP - Humidistat/Timer control PIR - Passive infrared control Xpelair Typical Specification

162 Xpelair Typical Specification Xpelair LoVolt LV100 The unit is to be supplied from the Xpelair LoVolt 100mm range by Applied Energy Products Ltd, Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Ref LV AW LV100PC 90846AW LV100T 90847AW LV100H 90848AW LV100HP 90849AW LV100PIR 90867AW The unit shall be 12V Safety Extra Low Voltage design and supplied complete with a remote SELV transformer The unit shall be designed for wall, ceiling, shaft (or window mounting in glass up to 6mm thick) using the kit provided. An air operated backdraught shutter shall be included The fan housing shall be moulded in high gloss white ABS and be of modern design with finger guarding for additional safety protection The motor shall be lubricated for life with built in safety thermal overload protection The unit shall be rated at IPX5. In addition it shall conform to Building Regulations for use in toilets and bathrooms Dimensions shall be W x H x D 165 x 155 x 42mm excluding spigot PC - Pullcord T - Timer (2-20mins) H - Humidistat control (50-90%RH) HP - Humidistat/Timer control PIR - Passive infrared control Xpelair Slimline 100 The unit is to be supplied from the Xpelair SL100 & SL150 range by Applied Energy Products Ltd, Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Ref SL AW SL100P 91226AW SL100T 91227AW SL100HT 91228AW The unit shall be designed for wall, ceiling, shaft (or window mounting in glass up to 6mm thick) using the kit provided Shall be designed so that the front grille thickness is no more than 10mm The fan housing shall be moulded in high gloss white ABS and be of modern design with finger guarding for additional safety protection The motor shall be lubricated for life with built in safety thermal overload protection The unit shall be rated at IPX4 and a double insulated appliance In addition it shall conform to Building Regulations for use in toilets and bathrooms P models shall include integral pullcord T models shall include integral timer control (3-15mins) HT models shall include integral humidity control (45-99%RH) and timer control HP models shall include a variable speed humidistat with integral pullcord giving full speed override Dimensions shall be W x H x D 140 x 140 x 125mm (including 15mm flange) Xpelair CentrX The unit is to be supplied from the Xpelair CentrX range by Applied Energy Products Ltd, Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Ref CT AW CT100T 91237AW CT100HT 91238AW CT AW CT100+P 91240AW CT100+HT 91241AW The unit shall be of panel design with a centrifugal high pressure performance characteristic. The spigot outlet shall be suitable for connection to 100mm flexible or rigid wall tubes or ducting Models shall be available with built in time overrun and built in humidistat auto control The unit shall be rated at IPX4. The fan shall conform to Building Regulations for use in toilets, bathrooms and utility rooms The housing shall be moulded in high gloss white ABS. The front cover shall be removable to facilitate removal and adjustment The motor shall be fitted with sealed self aligning maintenance free bearings and include thermal overload protection P models shall include integral pullcord T models shall include integral timer control (3-15mins) HT models shall include integral humidity control (45-99%RH) and timer control Dimensions shall be: W x H x D CT x 190 x 130mm CT x 208 x 139mm including 17mm spigot 162

163 Xpelair XIL Inline Shower Fan Systems The unit is to be supplied from the Xpelair XIL range by Applied Energy Products Ltd, Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Ref XIL System XIL AW XIL AW XIL AW XIL T System with integral overrun timer XIL100T 90330AW XIL125T 91243AW XIL150T 91245AW XXS100 fan only 90331AW XXS100T fan only 90332AW The system shall comprise: Inline axial fan 3m of 100mm dia. flexible duct Four fixing clips Inline backdraught shutter Internal ceiling grille in white Outside soffit/wall grille in brown T models shall include overrun timer function adjustable between 2-20mins (100 range) and 3-15mins (125/150 ranges) The fan housing and grilles shall be moulded in ABS. The internal and external grilles should have finger guard protection. The fan and air operated backdraught shutter shall be installed in the space above the ceiling at the highest point in the system The motor shall be lubricated for life with built in safety thermal overload protection The fan shall comply with Building Regulations for use in bathrooms and shower rooms when typically installed Xpelair BriteX LoVolt & BriteX Turbo The unit is to be supplied from the Xpelair BriteX range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Ref BX100C 92278AW BX100W 92276AW BX100CT 92279AW BX100WT 92277AW BX100+C 91249AW BX100+W 91248AW BX100+CT 91251AW BX100+WT 91250AW The system shall be suitable for installation in Zone 1 as defined by the IEE regulations 16th Edition The lamp shall be 12V 50W Safety Extra Low Voltage sealed dichroic lamp with SELV transformer. The fan shall be sited above the ceiling at the highest point in the duct run. The fan shall be manufactured in ABS and have a maintenance free motor with safety thermal overload protection. The fan shall be IPX4 when installed as per the instructions and double insulated Class II. The kit shall contain ducting, duct ties and a grille suitable for soffit or gable end fitting The System shall be guaranteed for 3 years (BriteX LoVolt) or 2 years (BriteX Turbo) Supply voltage V 50Hz T models shall include integral timer function adjustable between:- Britex Lovolt 1-20 min Britex Turbo 3-15 min Xpelair XIM The unit is to be supplied from the Xpelair XIM range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref XIM100* 91252AW XIM100T* 91253AW XIM AW XIM AW XIM AW XIM150T 91257AW XIM AW *IPX2 rated The unit shall be suitable for ducted applications where high humidity is present The unit shall be of polymer construction with spigots for attachment to the ductwork The impeller shall be of mixed flow design with matching guide vanes. A QuickLock installation cradle shall be provided for easy installation The motor shall be maintenance free, with greased for life bearings and safety thermal overload protection T models shall include integral timer function adjustable between 3-15mins The units shall be IPX4 rated and conform to Building Regulations for toilets, shower rooms and bathrooms All models shall be 2 speed (except XIM100 and XIM100T) An optional change over switch shall be available, COS Ref AW The unit shall be a double insulated appliance Overall dimensions W x H x D 100mm 125mm 150mm 200mm 189 x 177 x 238mm 200 x 217 x 263mm 192 x 244 x 293mm 230 x 279 x 354mm Xpelair Typical Specification

164 Xpelair Typical Specification Xpelair Slimline 150 The unit is to be supplied from the Xpelair SL100 & SL150 range by Applied Energy Products Ltd, Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model SL150 SL150P SL150HT SL150HP SG150HP Ref 91229AW 91230AW 91231AW 91496AW 92349AW The unit shall be designed for wall, ceiling, shaft (or window mounting in glass up to 6mm thick) using the kit provided Shall be designed so that the front grille thickness is no more than 10mm The fan housing shall be moulded in high gloss white ABS and be of modern design with finger guarding for additional safety protection The motor shall be lubricated for life with built in safety thermal overload protection The unit shall be rated at IPX4 and a double insulated appliance In addition it shall conform to Building Regulations for use in toilets and bathrooms P models shall include integral pullcord T models shall include integral timer control (45sec - 15mins) HT models shall include integral humidity control (45-99%RH) and timer control HP models shall include a variable speed humidistat with integral pullcord giving full speed override Dimensions shall be W x H x D 190 x 190 x 130mm including (front flange depth 15mm) Xpelair GX6, GXC6 & GXC9 The unit is to be supplied from the Xpelair GX/GXC range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Ref GXC AW GXC6T 90861AW GX AW GX6T 90812AW GX6HT 90814AW GX6HT AW GXC6SC 91142AW GXC AW The extract fan shall be suitable for window, wall, or panel mounting. An optional WK tube shall be used for wall installation The motor shall be high efficiency, totally enclosed, with sealed for life bearings and safety thermal overload protection The motor /impeller assembly shall be housed in a rigid ABS moulded duct to ensure even, optimum impeller tip clearance The inner grille shall be moulded in white ABS with a high gloss finish and incorporate a finger guard and removable shutter cassette for ease of maintenance The impeller shall be pre-balanced and removable for cleaning by means of a shaft screw fixing A trickle vent option shall be incorporated into the mechanism to provide 4000mm 2 passive ventilation when the fan is Off Operation of the shutter shall be by a silent electrothermal actuator on GX6 variants and GXC6T; pullcord on GXC6 and GXC9 The unit shall be BEAB approved T models shall include integral timer function adjustable between 2-20mins GX6HT shall include integral humidity function (50-90%RH) and timer GX6HT2 shall include integral humidity and timer function with 2 speeds GXC6SC shall be speed adjustable Overall dimensions for GXC6 & GX6 GXC9 W x H x D 210 x 226 x 112mm 294 x 312 x 117mm Xpelair GX6 EC2, GXC6 EC2 The unit is to be supplied from the Xpelair GX/GXC EC2 range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model GX6 EC2 GXC6 EC2 Ref 92294AW 92295AW The 150mm extract fan shall be suitable for window, wall or panel mounting Hole size in glass shall be 184mm. An optional WK tube shall be used for wall installation The motor shall be an UltraEC type external rotor motor with sealed for life bearings and safety thermal overload protection. Class II appliance The products shall be capable to be set at one of two extract performances which will satisfy Building Regulations Part F1 for intermittant kitchen and Utility room use. The rated wattage shall not exceed 0.036w/l/s for GX6 EC2 and 0.027w/l/s for GXC6 EC2 The product shall be suitable for ambient temperatures up to 50C The motor / impeller shall be housed in a rigid ABS moulded duct to ensure even optimum impeller clearance The inner grille shall be moulded in whit ABS with a high gloss finish and incorporate a finger guard and removable shutter cassette for ease of maintenance The impeller shall be pre balanced and removable for cleaning by means of a shaft screw fixing Operation of the shutter shall be by a silent electrothermal actuator on GX6 EC2 and pullcord on the GXC6 EC2 Overall dimensions for: GX6/GXC6 EC2 WxHxD 210 x 226 x 112 mm 164

165 Xpelair Premier DX400 & CF40 The unit is to be supplied from the Xpelair Premier range by Applied Energy Products Ltd, Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model DX400 DX400T DX400PC DX400RS CF40 CF40TD CF40RSTD Ref 91083AW 91084AW 91100AW 91085AW 91086AW 91087AW 91088AW The unit shall be designed for flush or surface mounting in walls and ceilings using the fixing clamps provided An external grille shall be supplied with the fan DX400 fans shall have a two speed running facility and CF40 fans a room size selector in the control system to provide three preset speed settings for optimum room performance A further option of trickle ventilation shall be provided by way of a preset switch on the unit (not DX400) CF versions shall be manually adjustable between 50 and 90% RH with fan running status indicated by lights The unit shall be BEAB approved and rated IPX5. in addition the fan shall conform to Building Regulations for use in kitchens, utility rooms and bathrooms The fan housing shall be moulded in high gloss white ABS and be of modern design with the air inlet discreetly concealed behind a stylish baffle fixed to the front cover The front cover assembly shall be held in position by clips to facilitate ease of removal for fan adjustment The motor shall be of external rotor construction, IP44 rated with sealed maintenance free bearings and include inbuilt safety thermal overload protection A dynamically balanced balanced impeller shall be integral with the motor assembly PC models shall be pullcord operated T models shall include integral timer function adjustable between 30s-20mins RS shall be remote switched use with MOS Ref AW TD shall have an integral timer RSTD shall have an integral timer and remote delay switch. MOS Ref AW Overall dimensions: W x H x D 249 x 297 x 147mm excluding 35mm spigot Xpelair Kitchen Canopies The unit is to be supplied from the Xpelair Nouvelle Cuisine range by Applied Energy Products Ltd, Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Wall Chimney Canopies Curved 900mm Flat 900mm 600mm Box 900mm 700mm Tonda 900mm 600mm Chimney 900mm 600mm Island Chimney Canopy Island 900mm 600mm Built in Canopies Inset 520mm 282mm Integrated Standard Standard Plus (SS) 600mm 600mm 600mm The kitchen canopy shall be offered in a range of styles to suit wall, island and integrated applications. Models shall be available in stainless steel/glass or white/brown finish to suit kitchen decor and have seperate switchable integrated fan and lighting All models shall be suitable for extraction to the outside using 125mm Xflex or Profile 60 flat duct systems or can be set for recirculation, optional carbon filters to be available The Wall, Island and Standard Plus models shall be fitted with washable grease filters, disposable acrylic filters on other integrated models The three speed continuously rated motors shall be maintenance free There shall be a choice of performance to meet the minimum requirements of Building Regulations Three year guarantee Xpelair Profile 60 The components are to be supplied from the Xpelair Profile 60 range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref Straight duct 1m 89755AA Straight duct 1.5m 91188AA Horizontal bend adjustable 89750AA Horizontal 90 bend 89754AA Vertical 90 bend 89753AA Elbow/plenum to 100mm dia 89752AA Elbow/plenum to 125mm dia Elbow/plenum to 150mm dia Duct coupling T piece Support clip Wall outlet grille Flexible ducting 0.5m Fire break intumescent Round to rectangular adaptor 91259AA 91483AA 89757AA 90091AA 89756AA 89751AA 91484AA 91975AA 91482AA Profile 60 system components shall be used in conjunction with Premier DX200 and CF20, DX400 and CF40 models set at high speed Also suitable for Xpelair range of kitchen canopies The system shall use a plenum kit to connect to the fan with further components appropriate for the application The outer dimensions shall be 204 x 60mm and have a cross sectional area of 11200mm 2 Xpelair Profile 60 shall be manufactured in self extinguishing flame retardant PVC conforming to DIN 4102 B.M Xpelair Typical Specification

166 Xpelair Typical Specification Xpelair CX10 & CMF The unit is to be supplied from the Xpelair CX & CMF range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) The unit shall be designed for flush ceiling mounting in incorporate a finger guard for safety protection CX model shall be an axial fan unit and CMF models centrifugal CMF models shall have a cassette style construction allowing first-fit ductwork to be fitted prior to the installment of the unit. Motors shall be lubricated for life and be maintenance free Model CX10 CMF171 CMF241 Ref 90209AB 89955AW 89956AW The units shall be fully recessed with only the high gloss ABS moulded grille showing There shall be spigots for the attachment of optional ductwork Safety thermal overload protection shall be fitted The fascia grilles shall be demountable to facilitate cleaning CMF AW Xpelair Xplus Whole House Multipoint Extract Fans The unit is to be supplied from the Xpelair Xplus range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Ref Xplus AW Xplus AW Xplus 340 DC 91262AW Xplus 340 DCRF 91263AW Controller 91457AW The extract fan unit shall be designed for the continuous extraction of condensation and odours from the wet rooms of a dwelling. It may be installed in a loft space or services cupboard. Suitable ductwork such as Xflex125 of Profile 60 shall be used with RegulAir ventilation terminals The fan housing shall be manufactured in a polymeric material and be fitted with three 125mm room side extract spigots and one 125mm discharge spigot terminating at a wall or roof The fan shall have a backward centrifugal curved impeller. The motor shall be rated for continuous running, have sealed for life bearings and be maintenance free. AC and DC motor variants shall be available All models shall be speed controllable using an optional hard wired switch. Xplus 340 DCFRF shall also be available with a 100M (line of sight) wireless transmitter control system Xplus 340 DC shall be AppendixQ listed and meet Best Pactice Criteria Xpelair Xplus 250 & 400 DC 8CV The unit is to be supplied from the Xpelair LoSound range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Xplus 250DC8CV Xplus 400DC8CV Ref 92290AW 92100AW There shall be two models with performances ranging from 48m 3 /h to 255m 3 /h and 206m 3 /h to 402m 3 /h (at 0Pa) Each model shall have 8 selectable set up speeds to suit installation application with speeds in accordance with Building Regulations Part F1 continuous extract requirements selected via an integral switch accessible from the outside of the product To avoid tampering with speed settings in use, the unit must be powered Off if switch adjustment needs to be made. Altering the switch position when the unit is powered will not change the speed setting A Boost function shall be available to increase extract rate by one set point i.e. the boost speed of speed 1 is equivalent to speed 2 etc. Speed 8 boost is 36m_/h above speed 8 Boost function shall be operated using standard Xpelair controllers i.e. COS switch, XRH, XPIRA, DT20, and AQS controllers The product shall be rated at 230V, 50/60Hz, 1 phase Main body shall be manufactured in impact resistant polymeric material The unit shall be supplied with 1m of 4-core cable The unit shall have 3 intake connections of 125mm diameter and1 extract connection 125mm diameter Motor shall be Energy saving Longlife UltraDC external rotor motor with greased for life ball bearings Systems using these products should design to achieve a duct velocity of less than 3m/s in order to minimise noise. The fan shall not exceed a specific fan power of pa Xplus 250 DC 8CV shall be Appendix listed and meet Best Practice Criteria 166

167 Xpelair Xcell 150 & 200 Wholehouse ventilation unit from the Xpelair Xcell range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Xcell 150 Xcell 150R Xcell 150V Xcell 200 Xcell 200BP Xcell 200R Xcell 200RBP Ref 91981AA 91976AA 92004AA 91977AA 91979AA 91978AA 91980AA The MVHR unit shall have a slimline insulated steel case with sealed access panel. The unit shall be suitable for ceiling or loft mounting in confined spaces The heat recovery cell shall be up to 92% efficiency depending on volume setting The unit shall be fitted with multispeed double inlet fans for whisper quiet performance to be set at a speed based on the volume / duty of the dwelling in accordance with Building Regulations Part F1. A remotely fitted switch shall be provided with the unit Supply and exhaust filters shall protect the cell (Xcell 200 only) Hygenic coated steel anti-bacterial condensate tray and outlet shall be fitted Xcell 150 has two 125mm roomside spigots Xcell 150R has a pair of twin flat duct spigots for connection to Profile 60 duct Xcell 150V is a vertical version with all spigots on top Xcell 200 has two 150mm roomside spigots Xcell 200R has two pairs of twin flat duct spigots for connection to Profile 60 duct Xcell 200BP and 200RBP shall have 100% motorised summer bypass Xpelair Xcell 270 LongLife The unit is to be supplied from the Xpelair Xcell range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Ref Xcell AW Xcell 270BP 91265AW The MVHR unit shall be designed for installation in well insulated dwellings The unit shall be wall mounted using a wall bracket provided with 150mm duct spigots ready for connection to supply and return air ducts and ductwork to a wall or roof termination The cabinet shall be manufactured in steel and powder coated in beige A hinged door shall be provided on the front of the cabinet for access to the stage 1 G4 filters and occasional visual inspection of the cell The unit shall have 3 speed from a choice of twelve to match the volume of the dwelling continuous ventilation including the choice of a boost speed if required. As a result the heat recovery cell shall be up to 93% efficient The inner components and scroll shall be made from non hygroscopic high density structural foam mouldings with an integral double condensate tray. Provision shall be made for alternative condensate drain off points The vent shall be be controlled by 3 speed selective switch Ref AW Xpelair Xcell 300 & 400 LongLife The unit is to be supplied from the Xpelair Xcell range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Xcell 300 Xcell 400 Xcell 300BP Xcell 400BP Ref 91267AW 91269AW 91268AW 91270AW The MVHR unit shall be designed for installation in well insulated dwellings The unit shall be wall mounted using a wall bracket and provided with 150mm duct spigots on the 300 models and 180mm duct spigots on the 400 models ready for connection to supply and return air ducts and ductwork to a wall or roof terminations The cabinet shall be manufactured in polypropylene to RAL 9002: White The inner components and scroll shall be made from non hygroscopic high density structural foam mouldings with an integral double condensate tray. Provision shall be made for alternative condensate drain off points Backward curved impeller Access shall be provided to the stage 1 G3 filters. The unit shall have a choice of speeds to match the volume of the dwelling in order to provide half an air change per hour continuous ventilation including the choice of a boost speed if required. As a result the heat recovery cell shall be up to 91% efficient - certified by TZWL, depending on chosen speed. The fans shall be electronically balanced to provide equal extraction and air supply The motors shall be UltraDC motors with maintenance free greased for life ball bearings A supply lead shall be provided to facilitate wiring Overall Dimensions W x H x D 740 x 600 x 540mm Weight :32kg Xpelair Typical Specification

168 Xpelair Typical Specification Xpelair Xcell 600 Low Profile The unit is to be supplied from the Xpelair Xcell range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Xcell 600 Xcell 600BP Ref 92002AA 92003AA The MVHR unit shall have a slimline insulated steel case and sealed access panel. The unit shall be suitable for ceiling or loft mounting in confined spaces using the integral mounting point detail provided The heat recovery unit shall be up to 70% efficient depending on volume setting and be compatible with heat pump systems The unit shall be fitted with double inlet fans for quiet operation and be set at a speed calculated on the volume/duty of the dwelling in accordance with Building Regulations Part F1. A remotely fitted single gang switch shall be provided with the unit. Heavy duty supply and exhaust filters shall be included in the unit The condensate tray shall have an anti bacterial coating. The unit shall have 200mm spigots on the room side and discharge side A further model shall be available fitted with a motorised summer Bypass feature Dimensions H x W x L 250 x 750 x 1100mm (Excluding spigots) Xpelair Profile 150 The components are to be supplied from the Xpelair Profile 150 range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref 2.5m straight duct 91272AA 90º bend 91273AA 45º bend 91274AA 30º bend 91275AA 15º bend 91276AA Pushfit collar Snap Clamp Collar 91279AA 91280AA Roof Cowl Wall Cowl 91277AA 91278AA Profile 150 ductwork shall be used in conjunction with Xflex ductwork and Profile 60 flat duct to provide the distribution system for Xcell MVHR units Ducting shall be manufactured in steam resistant, self extinguishing EPE to class B1, DIN 4102 Density shall be 50kg/m 3 and the duct shall have a thermal coefficient of W/m. K measured at 0ºC in accordance with DIN Temperature range shall be -40 to +100ºC A selection of bends constructed of the same material shall be available. The duct and bends shall be connected using 100mm collar connectors with built in internal stops. For duct sections requiring subsequent disconnection for service or cleaning access, a quick release collar shall be available Further interconnecting components shall be available from the Profile 60 flat duct range to complete the system Xpelair EverDri LongLife The unit is to be supplied from the Xpelair EverDri range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model XEDL For installation in houses Ref 90998AA The fan unit shall be designed for fully automatic operation and continuous running and supplied complete with anti vibration mountings, interconnecting flexible ducting and purpose designed diffuser outlet with direction baffles The unit shall continuously monitor the loft air temperature and will automatically adjust the performance of the fan if the temperature rises above or falls below 19 C. The fan shall automatically suspend operation if the temperature rises above 25 C and re-continue when the temperature falls back down below that point. Four performance selection settings shall be provided on the unit to provide the optimum performance settings for differing dwelling sizes and severity of condensation. The operation status of the unit shall be indicated by means of LED s on the control panel. The fan motor shall be a high efficiency electronically commutated DC motor with sealed for life maintenance free bearings and thermal protection. Quiet running of the fan shall be ensured by incorporation of a forward curved centrifugal impeller operating in a double inlet scroll housing. The fan shall be supplied complete with a supply cord fitted. The incoming air shall pass through a filter, these are to be available as a spare part from Xpelair. 168

169 Xpelair LoVolt XHR150 The unit is to be supplied from the Xpelair XHR range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model XHR150PC XHR150HP Ref 90821AA 90820AA The single room heat recovery ventilator shall be a Safety Extra Low Voltage LoVolt product and supplied complete with exterior weather resistant bezel and a remote SELV transformer The unit shall have two speeds: trickle for constant background ventilation and a boost speed operated manually by way of a built in pullcord on the PC model and by way of an automatic humidity sensor control on the HP model The unit shall be of cylindrical construction with integral outside intake / extract points The internal grille shall be moulded in white ABS with a high gloss finish and incorporate a safety finger guard. To avoid cross contamination, the incoming air shall be delivered to the room at the side of the grille ensuring a 90º separation from the outgoing air. The incoming air shall be filtered through a foam filter medium The ventilator shall be fitted with a long life aluminium heat recovery cell having an efficiency of up to 80% BBA Agreement Board Certification Overall dimensions: W x H x L 200 x 180 x 532mm Xpelair AutoFlow The unit is to be supplied from the Xpelair AutoFlow range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Ref AutoFlow AW AutoFlow AW AutoFlow AW The ventilator shall be installed using a core cutting drill The Passive ventilator shall be self regulating using a temperature sensitive piston to adjust the airflow in relation to the outside air temperature. The piston shall be maintenance free. In automatic mode the airflow shall decrease with declining outdoor temperature and increase with rising outdoor temperature. The vent disc shall be insulated and tight fitting to the bezel when closed The vent disc shall be capable of being adjusted manually by rotating the disc from automatic mode to increase or decrease the opening size. The temperature range shall be from -5ºC to +10ºC The disc, wall tube and external grille shall be manufactured in ABS. The inside disc, bezel and the external weather grille shall be white in colour Xpelair GX6, GX9 & GX12 The unit is to be supplied from the Xpelair GX range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model GX6 GX9 GX12 Ref 90800AW 89994AW 90012AW The fan shall be suitable for window mounting (or wall mounting using optional wall kit) Performance shall have been proven by type testing in accordance with BS 848 Part 1 and FID performance determined to be: (m 3 /h) extract intake GX6 266 GX GX All models shall have totally enclosed AC motors with sealed for life bearings with external rotor motors on GX9 / GX12 and safety thermal overload protection The high efficiency moulded axial bladed impeller shall be pre-balanced and designed for optimum performance and ease of removal for cleaning Motor/impeller assembly shall be in a rigid ABS housing with high gloss white finish and incorporate a finger guard A passive trickle vent option shall be incorporated into the inner grille shutter cassette to provide low level ventilation when the unit is not in use The shutter shall be operated by a silent electrothermal actuator It shall be possible to remove the inner grille and shutter cassette separately for cleaning An outer grille shall be provided, this to be moulded in Shadow Grey ABS with high gloss finish and incorporate weather resistant vanes On GX9 and GX12 models customer electrical connection shall be via an internal tamper-proof plug and socket On GX9 and GX12 models a concealed switch on the unit shall predetermine the mode of operation: intake only, or extract only or optional controller operation for speed control and reversibility The unit shall be BEAB approved Overall dimensions: W x H x D GX6 210 x 226 x 112mm GX9 294 x 312 x 117mm GX x 408 x 161mm External depth shall be 32mm/32mm and 34mm respectively Xpelair Typical Specification

170 Xpelair Typical Specification Xpelair PX6, PX9 & PX12 The unit is to be supplied from the Xpelair PX range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model PX6 PX9 PX12 Ref 91300AW 91299AW 91298AW The fan shall be suitable for ceiling or panel mounting. Performance shall have been proven by type testing in accordance with BS 848 Part 1 and FID performance determined to be: (m 3 /h) extract intake PX6 246 PX PX All models shall have totally enclosed AC motors with sealed for life bearings, with external rotor motors on PX9 / PX12, and safety thermal overload protection The high efficiency moulded axial bladed impeller shall be pre-balanced and designed for optimum performance and ease of removal for cleaning Motor/impeller assembly shall be in a rigid ABS housing with high gloss white finish and incorporate a finger guard A passive trickle vent option shall be incorporated into the inner grille shutter cassette to provide low level ventilation when the unit is not in use The shutter shall be operated by a silent electrothermal actuator It shall be possible to remove the inner grille and shutter cassette separately for cleaning on PX9 and PX12 models Customer electrical connection shall be via an internal tamper- proof plug and socket on PX9 and PX12 models A concealed switch on the unit shall predetermine the mode of operation: intake only, or extract only or optional controller operation for speed control and reversibility (PX9 and PX12 only) The unit shall be BEAB approved Overall internal projection shall be: PX6 PX9 / PX12 11mm 18mm Xpelair RX6, RX9 & RX12 The unit is to be supplied from the Xpelair RX range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Ref RX AW RX AW RX AW The fan shall be suitable for roof mounting through clear and obscure glazing, polycarbonate sheeting, roof mounting plates and materials up to 25mm On non smooth glass surfaces a suitable sealant shall be applied to the outer gasket Performance shall have been proven by type testing in accordance with BS 848 Part 1 and FID performance determined to be: (m 3 /h) extract intake RX6(T) 206 RX RX All models shall have totally enclosed AC motors with sealed for life bearings, with external rotor motors on RX9 / RX12, and safety thermal overload protection The high efficiency moulded axial bladed impeller shall be pre-balanced for optimum performance and ease of removal for cleaning Motor/impeller assembly shall be in a rigid ABS housing with high gloss finish and incorporate a finger guard A passive trickle vent option shall be incorporated into the inner grille shutter cassette to provide low level ventilation when the unit is not in use The shutter shall be operated by a silent electrothermal actuator It shall be possible to remove the inner grille and shutter cassette separately for cleaning An outer roof cowl with internal deflector shall be provided, this to be moulded in ABS with high gloss UV stabilised finish on RX9 and RX12 models Customer electrical connection shall be via an internal tamper-proof plug and socket on RX9 and RX12 models A concealed switch on the unit shall predetermine the mode of operation: intake only, or extract only or optional controller operation The unit shall be BEAB approved Overall internal projection shall be: RX6 RX9 RX12 112mm 117mm 161mm 170

171 Xpelair WX6, WX9 & WX12 The unit is to be supplied from the Xpelair WX range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) The fan shall be suitable for wall mounting Installation shall be mortar free and the product shall be supplied complete with wall liner The shutter shall be operated by a silent electrothermal actuator It shall be possible to remove the inner grille and shutter cassette separately for cleaning Model WX6 WX6T WX9 WX12 Ref 90822AW 90823AW 89996AW 90011AW Performance shall have been proven by type testing in accordance with BS 848 Part 1 and FID performance determined to be: (m 3 /h) extract intake WX6(T) 246 WX WX An outer grille shall be provided, this to be moulded in Shadow Grey ABS with high gloss finish and incorporate weatherproof vanes On WX9 and WX12 models customer electrical connection shall be via an internal tamper-proof plug and socket All models shall have totally enclosed AC motors with sealed for life bearings, with external rotor motors on WX9 / WX12, and safety thermal overload protection The high efficiency moulded axial bladed impeller shall be pre-balanced and designed for optimum performance and ease of removal for cleaning Motor/impeller assembly shall be in a rigid ABS housing with high gloss white finish and incorporate a finger guard On WX9 and WX12 models a concealed switch on the unit shall predetermine the mode of operation: intake only, or extract only or optional controller operation for speed control and reversibility The unit shall be BEAB approved Overall internal projection shall be: WX6 11mm WX9 / WX12 18mm A passive trickle vent option shall be incorporated into the inner grille shutter cassette to provide low level ventilation when the unit is not in use Xpelair WXXL The unit is to be supplied from the Xpelair WXXL range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Ref Extract models WXXL AA WXXL AA WXXL AA Intake models WXXLS AA WXXLS AA WXXLS AA WXXL models shall have G.S.M.telescopic wall liner suitable for installation in solid and cavity walls from 275mm to 375mm The external rotor motor rated at IP44 shall be fitted with sealed for life maintenance free bearings On the inner wall face the fan shall be fitted with a white epoxy coated aluminium internal wall grille with removable core for easy cleaning. The fan assembly shall be separately guarded for additional safety The shutter shall be manufactured from aluminium housed behind a anodised aluminium external weather louvre On intake models the shutter shall be electro-mechanically opened and be fitted with a washable prefilter The fan shall have a built in three speed control. A separate slimline three position and off selection switch shall be provided for remote wall mounting Xpelair Typical Specification

172 Xpelair Typical Specification Xpelair ChefX The unit is to be supplied from the Xpelair ChefX range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Ref ChefX Tempo 91309AA ChefX Presto 91310AA ChefX Mezzo 91311AA Controls for Presto/Mezzo Transformer 91369AA Professional quality extract canopy of robust construction designed for spot ventilation in food preparation and wash up areas. Designed for exhaust operation to the outside using rigid ductwork supplied by others The canopy housing shall be manufactured in stainless steel with G.S.M internal support Washable grease filters shall be provided The hood shall have an integral fan assembly with continuously rated motor and sealed for life beatings. The motor shall be IPX4 rated and be suitable for temperatures up to 65 o C The motor shall be speed controllable using optional electronic controller or a five step voltage transformer. The tempo model shall be fitted with a built in speed controller and integral lighting Dimensions H x W x L Tempo 180 x 600 x 540 Presto 2350 x 1000 x 460 Mezzo 400 x 1000 x pa duct resistance Tempo 400m 3 /h Presto 2200m 3 /h Mezzo 2800m 3 /h Xpelair Digitemp The unit is to be supplied from the Xpelair Digitemp range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Ref Cooling WA210N 91173AA WA245N 91174AA Heating & cooling WHP210N 91175AA WHP245N 91154AA The three speed unit shall be designed for surface mounting on walls at high or low level without the need for an external condenser Two airside wall tubes shall be provided for fitting through 155mm sloping core drilled holes through the external wall to the outside The maximum length of the tubes shall be 1000mm Two folding external grilles shall be supplied for fitting through the wall tubes from within the room All cooling only (WA210N & WA245N) units shall not require a condensate drain Control shall be from a full function hand held infrared controller with a range of 8m The unit refrigerant shall be factory sealed with no opening of the system or hose connections on site Refrigerant R410a shall be used having an Ozone Depletion Power Rating of 0 The unit shall be fitted with a pollen filter The unit shall be sound insulated and have a super quiet night time function The unit shall have a self-diagnostic system, which displays the condition of the unit using a series of LEDs Performance shall be as follows: model cooling heating kw kw WA210N 2.1 WA245N 2.45 WHP210N WHP245N Overall dimensions: WxHxD 870 x 400 x 280mm Min. diameter of holes: 155mm Xpelair WH30, WH60 & WHP30 The unit is to be supplied from the Xpelair WH range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ Tel. +44 (0) Model Ref WH AC WH AC WHP AW The space heater shall be suitable for wall mounting and in the case of the 6kW version also suitable for suspension from above The unit shall be capable of being adjusted both in the vertical and horizontal planes and then fixed in position The industrial models shall have a robust steel casing with die cast aluminium guards. Commercial model shall have a flame retardant polycarbonate/glass filled nylon case finished in white and grey The terminal block shall be easily accessible for wiring in position A control unit shall be available for the 3kW versions to enable the fan to be run during warmer months or fan heater mode with thermostatic control for heating The 3kW versions shall be suitable for connection to a single phase supply. The 6kW model shall be suitable for connection to either a singe phase or three phase supply Overall dimensions including mounting bracket with the unit mounted vertically: The heating elements shall be of spiral wound nichrome wire design The fan shall have a totally enclosed, continuously rated, maintenance free motor with greased for life bearings WH30 WH60 WHP30 W x H x D 254 x 368 x 270mm 276 x 429 x 327mm 267 x 370 x 370mm 172

173 Xpelair DCH3000A The unit is to be supplied from the Xpelair DCH range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref. DCH3000A 90792AW The fan assisted heater shall be suitable for wall mounting by way of two mounting points to the rear of the cabinet The heater shall not require any feet and shall be mounted clear of the floor surface The tangential fan shall be balanced. The motor shall be maintenance free with sealed for life bearings and safety thermal overload protection. In addition there shall be a safety cut out with disconnection from the mains to reset automatic operation and lamp shall indicate the unit is operating The unit shall be BEAB approved Overall dimensions W x H x D 505 x 265 x 110mm The heating element shall be a spiral wound design. There shall be three switches providing On/Off, and 1kW, 2kW or 3kW output. A further rotary knob will permit the setting of the room temperature for Xpelair PlinthHeat The unit is to be supplied from the Xpelair PlinthHeat range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref With integral control switches: PlinthHeat W 91465AW PlinthHeat B 91466AB PlinthHeat S 91312AW With remote controls*: PlinthHeat WR 91467AW PlinthHeat BR 91468AB PlinthHeat SR 91313AW *remote controller The fan assisted heater shall be suitable for installation in the standard plinths of a kitchen cabinet of 120mm or more There shall be an air inlet on either side of the fascia plate and three horizontal outlet grille sections in the centre The fascia shall be available in two powder coated finishes and additionally available in brushed stainless steel to match the kitchen decor The fascia shall have six fixing holes for secure attachment to the plinth The heating element shall be a spiral wound design There shall be two switches on the integral control model providing On/Off, and 1kW or 2kW output. A lamp shall indicate the output chosen A separate kit shall be available for the remote operated versions consisting of a thermostat and means of isolation. For safety the heater shall have an automatic thermal cutout The fan shall be of axial design with a maintenance free motor having sealed for life bearings and safety thermal overload protection Overall dimensions: W x H x D 470 x 120 x 240mm Hole dimensions shall be 95 x 440mm * Requires remote thermostatic control kit consisting of wall mounted single stage variable thermostat, fused double pole switch, two gang box and cable wall clamp. Ref Xpelair ScreenHeat The unit is to be supplied from the Xpelair ScreenHeat range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref 1.5-3kW 91469AW kW 91470AW The hot air curtain shall be suitable for wall or ceiling mounting using the brackets provided. The units shall be in standard 600mm modular widths for side by side mounting over larger width doorways The brackets shall have key hole slots for easy installation Motor shall be shaded pole, maintenance free, with sealed for life bearings and safety thermal overload protection The fan shall be tangential and balanced to provide quiet vibration free operation The element shall be of open coil construction and supported by ceramic insulators The casing shall be manufactured in zinc coated steel, externally powder coated in a white finish Overall dimensions: W x H x D 610 x 185 x 105mm Xpelair Typical Specification

174 Xpelair Typical Specification Xpelair Whispair The unit is to be supplied from the Xpelair Whispair range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model NWAN36 900mm NWAN mm NWAN mm NWAN mm Ref 90409AW 90410AW 90411AW 90412AW The unit shall be suitable for suspension from a ceiling using the ceiling anchor and suspension rod with integral anti-vibration bobbin provided Two lengths of rods shall be provided namely 375mm and 750mm The fan blades shall be powder coated steel and suitable for high humidity environments Air delivery shall be: Blade dia. m 3 /h 900mm mm mm mm The motor shall be a continuously rated, capacitor start and run, external rotor motor design. It shall be maintenance free and incorporate two sets of caged ball bearings for long life. The motor shall be suitable for hot and humid conditions up to 40ºC Colour: White Supply Voltage: V 50/60Hz Xpelair Single Whispair Controller WAC1 Ref AW Two slide switches provides On/Off operation and 5 speed settings. Complete with transformer controller for quiet operation and fan running indicator light Xpelair Group Whispair Controller WAC6 Ref AW For the simultaneous speed control of 1 to 6 Whispair units. Two slide switches provides On/Off operation and infinitely available speed settings Complete with fan running indicator light Xpelair Group Whispair Reversing Controller WAC6R Ref AW For the simultaneous speed control of 1 to 6 Whispair units. Two slide switches provides On/Off operation and infinitely variable speed settings. Complete with fan running indicator light and choice of winter/summer upwards or downwards airflow Xpelair Whispair Auto Temperature Controller AWC Ref AW De-stratification controller supplied with two thermo sensors at high / low level monitoring between preset minimum and maximum values. For the simultaneous speed control of 1 to 10 Whispair units. Three slide switches provides On/Off operation and upwards or downwards rotation, manual override Complete with fan running light w210 x h86 x d45mm Xpelair Electrostatic Air Cleaners The unit is to be supplied from the Xpelair EAC range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref Surface mounted Airflow: 400 to 1000m 3 /h EAC400W White 89861AW EAC400K Black/woodgrain 89869AK Airflow: 1000 to 2000 m 3 /h EAC700W White 89862AW EAC700K Black/woodgrain 89870AK Recess mounted Airflow: 420 to 780m 3 /h EACF400W Off White 90015AW Airflow: 1080 to 1500m 3 /h The electrostatic filtration unit shall be suitable for surface, and recess mounting, on ceilings The unit shall be supplied with a remote control to provide On/Off operation and variation in fan speed The electrostatic cell shall be manufactured in aluminium having filtration effective to 0.01 microns. There shall additionally be a pre-filter to capture general airborne particles The unit shall have a status indicator panel and a 'wash' indicator panel LED shall illuminate when the electrostatic cell and pre-filter require cleaning The casing of the surface models shall be manufactured in a polymeric material The flush model shall be of G.S.M. construction with a pressed steel fascia louvre coated studio finish off white, ready for painting to tone with ceiling décor The grille pattern shall provide a wide coverage Overall dimensions: W x H x D EAC x 273 x 739 EAC x 320 x 739 EACF x 343 x 572 Class 1 Earthed appliance Supply voltage: V 50Hz 174

175 Xpelair Scimitar XPMS The unit is to be supplied from the Xpelair XPMS range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref XPMS AA XPMS AA XPMS AA XPMS AA XPMS AA XPMS AA XPMS AA XPMS AA XPMS AA XPMS AA XPMS AA XPMS AA The fan shall be suitable for reverse operation The fan plate shall be manufactured from a single steel pressing to ensure perfect form of the inlet bell mouth and uniformity of impeller tip clearance The fan body, impeller and motor housing shall be further protected from deterioration by coating with corrosion resistant powder coat finish The motor shall be IP44 and IP54 rated external rotor type, AC capacitor start and run and have sealed for life ball bearings. Terminals will be provided for connection to an external thermal/overload protection device Insulation is to be rated to class F Impellers shall be high efficiency, low noise pressed steel sickle blade design. Rotors and Impellers are to be dynamically balanced to ISO :1986 Grade G 6.3 Customer connection shall be conveniently located in an IP54 rated terminal box located on the rear of the motor The fans shall be suitable for use in ambient temperatures ranging from -30 C to +60 C and higher on selected models All fans shall be supplied with an integral inlet guard to EN294 The fan shall be fully speed controllable using the appropriate speed controller or 5 step auto transformer (available as an ancillary) Must be suitable for V IPH 50Hz electrical supply Xpelair Scimitar XSCS The unit is to be supplied from the Xpelair XSCS range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref XSCS AA XSCS AA XSCS AA XSCS AA XSCS AA XSCS AA XSCS AA XSCS AA XSCS AA XSCS AA XSCS AA XSCS AA The fan housing shall be manufactured from galvanised steel. Drilled flanges shall be provided at either end of the case The fan body, impeller and motor housing shall be further protected from deterioration by two coats of corrosion resistant powder coat finish Motor mounting shall be via rigid welded steel rod construction and support the motor at four points The unit shall be capable of mounting at any angle or in any plane The motor shall be IPX4 rated external rotor type, AC capacitor start and run and have sealed for life ball bearings and inbuilt thermal protection. Insulation is to class F Impellers shall be high efficiency, low noise pressed steel sickle blade design Rotors and impellers are to be dynamically balanced to ISO :1986 Grade G 6.3 Customer connection shall be conveniently located in an IPX4 rated terminal box attached to the body of the fan Terminals shall be provided within the terminal box for connection to an external thermal overload protection device The fans shall be suitable for use in ambient temperatures ranging from 30 C to +60 C minimum and higher on selected models The fan shall be fully speed controllable using the appropriate speed controller or 5 step auto transformer (available as an ancillary) Must be suitable for V IPH 50Hz electrical supply Xpelair Rapier XPMA The unit is to be supplied from the Xpelair XPMA range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref XPMA AA XPMA AA XPMA AA XPMA AA XPMA AA XPMA AA XPMA AA XPMA AA XPMA AA XPMA AA XPMA AA XPMA AA The fan shall be suitable for reverse operation The fan plate shall be manufactured from a single steel pressing to ensure perfect form of the inlet bell mouth and uniformity of impeller tip clearance The fan body, impeller and motor housing shall be further protected from deterioration by coating with corrosion resistant powder coat finish The motor shall be IP44 and IP54 rated external rotor type, AC capacitor start and run and have sealed for life ball bearings. Terminals will be provided for connection to an external thermal/overload protection device Insulation is to be rated to class F Impellers shall be high efficiency, low noise pressed steel sickle blade design Rotors and impellers are to be dynamically balanced to ISO :1986 Grade G 6.3 Customer connection shall be conveniently located in an IP54 rated terminal box located on the rear of the motor The fans shall be suitable for use in ambient temperatures ranging from -30 C to +60 C and higher on selected models All fans shall be supplied with an integral inlet guard to EN294 The fan shall be fully speed controllable using the appropriate speed controller or 5 step auto transformer (available as an ancillary) Must be suitable for V IPH 50Hz electrical supply Xpelair Typical Specification

176 Xpelair Typical Specification Xpelair Rapier XSCA The unit is to be supplied from the Xpelair XSCA range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref XSCA AA XSCA AA XSCA AA XSCA AA XSCA AA XSCA AA XSCA AA XSCA AA XSCA AA XSCA AA XSCA AA XSCA AA The fan housing shall be manufactured from galvanised steel. Drilled flanges shall be provided at either end of the case The fan body, impeller and motor housing shall be further protected from deterioration by two coats of corrosion resistant powder coat finish Motor mounting shall be via rigid welded steel rod construction and support the motor at four points The unit shall be capable of mounting at any angle or in any plane The motor shall be IPX4 rated external rotor type, AC capacitor start and run and have sealed for life ball bearings and inbuilt thermal protection. Insulation is to class F Impellers shall be high efficiency, low noise pressed steel sickle blade design Rotors and impellers are to be dynamically balanced to ISO :1986 Grade G 6.3 Customer connection shall be conveniently located in an IPX4 rated terminal box attached to the body of the fan Terminals shall be provided within the terminal box for connection to an external thermal overload protection device The fans shall be suitable for use in ambient temperatures ranging from 30 C to +60 C minimum and higher on selected models The fan shall be fully speed controllable using the appropriate speed controller or 5 step auto transformer (available as an ancillary) Suitable for V Xpelair Rapier Roof XRA The unit is to be supplied from the Xpelair XRA range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref XRA AA XRA AA XRA AA XRA AA XRA AA XRA AA The roof cowl assembly shall be manufactured in glassfibre with a UV stabilised external finish The assembly shall include a birdguard and holes for fixing to the roof upstand (constructed by others) The fan plate and bellmouth assembly shall be manufactured from a single steel pressing to ensure perfect form and uniformity of impeller tip clearance The fan body, impeller and motor housing shall be further protected from deterioration by coating with corrosion resistant powder coat finish The motor shall be IP54 rated on sizes 500 and 630mm and IP44 rated on mm. external rotor motor type, AC capacitor start and run and have sealed for life bearings Terminals shall be provided for connection to an external thermal overload protection device Insulation rating shall be class F. Impellers shall be high efficiency, low noise pressed steel sickle design for sizes 315 to 450mm and die cast aluminium aerofoil section for sizes 500 and 630mm Rotors and impellers shall be dynamically balanced to ISO Grade G 6.3 Customer connection shall be conveniently positioned in a IPX4 terminal box The fan shall be suitable for use in ambient temperatures ranging from -30ºC to +60ºC and higher on selected models The fan section shall have an integral inlet guard to EN294 The fan shall be fully speed controllable using the appropriate optional electronic speed controller or 5 step auto transformer Suitable for V Xpelair XMV The unit is to be supplied from the Xpelair XMV range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) The unit shall be designed for installation in the horizontal plane on a suitable roof curb or purlin box (supplied by others) The unit shall be designed for the extraction of air with temperatures up to 100ºC The motor shall be located out of the airstream and be suitable for external ambient temperatures from -30ºC to +40ºC The motor shall be speed controllable using a five step transformer and DOL starter The models shall be available for single or three phase operation and in 4 and 6 pole A service isolator shall be provided on the unit The impeller shall be of aluminium construction with polyamide blades A discharge birdguard shall be provided The casing and twin wall body assembly shall be manufactured in high density Polyethylene and coloured RAL 9002 beige The unit shall be 100% recyclable A full range of optional five step transformers and starters shall be available for all models Suitable for V 176

177 Xpelair XID The unit is to be supplied from the Xpelair XID range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref XID AA XID AA XID AA XID AA XID AA XID AA The fan housing shall be manufactured from zinc coated sheet steel with integral bell mouth inlet & down stream guidevanes The duct connection spigot shall be 30mm deep minimum to facilitate secure connection of the ductwork The fan shall be supplied complete with a universal mounting bracket The unit shall be capable of mounting at any angle or in any plane Motors shall be IP44 rated external rotor type, AC capacitor start and run and have sealed for life ball bearings and inbuilt thermal protection. Insulation is to be rated to class F External terminal connection box The capacitor shall be mounted out of the airstream and housed within the customer connection terminal box located on the fan body The fans shall be suitable for use in ambient temperatures ranging from 30 C to +50 C The fan shall be fully speed controllable using the XIC1 speed controller (available as an ancillary Ref AW) Must be suitable for 220V-240V Impellers are to be backward curved centrifugal and dynamically balanced to ISO :1986 Grade G 6.3 Xpelair XIDP The unit is to be supplied from the Xpelair XIDP range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref XIDP AA XIDP AA XIDP AA XIDP AA XIDP AA XIDP AA The fan shall be suitable for use with rigid or flexible ductwork The housing shall be manufactured in a an impact resistant and fire retardant polymer with integral bell mouth entry, guidevanes and terminal connection box The fan shall be supplied with universal mounting bracket. The unit shall be capable of being mounted at any angle and in any plane Motors shall be IP44 rated external rotor type, AC capacitor start and run and have sealed for life ball bearings and inbuilt thermal protection. Insulation is to be rated to class F The capacitor shall be mounted out of the airstream and located on the fan body The fan shall be suitable for use in ambient temperatures from -30ºC to +50ºC The fan unit shall be fully speed controllable using XIC1 speed controller available as an ancillary Must be suitable for 220V-240V Impellers shall be backward curved centrifugal, dynamically balanced to ISO 1940:1986 Grade G 6.3 Xpelair Xpress XPRS The unit is to be supplied from the Xpelair Xpress range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref XPRS AA XPRS AA XPRS AA XPRS AA The inline fan shall have a pressure characteristic up to 250% higher than a conventional unit The fan shall have a steel housing with a contoured bellmouth entry and integrated foot The mixed flow fan blade shall be fabricated and balanced on the hub assembly to G 2.5 ISO There shall be matching aerofoil section guidevanes The motor shall be a continuously rated capacitor start and run motor with integrated thermal overload protection Wiring to the outside of the unit shall to to a terminal box rated at IP44 The fan diameter shall be no bigger than the duct in which it will be installed The fan shall be speed controllable using a Five step auto transformer Must be suitable for 220V-240V Xpelair Typical Specification

178 Xpelair Typical Specification Xpelair MinimX C XCDF The unit is to be supplied from the Xpelair MinimX C range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref XCDF AA XCDF AA XCDF AA XCDF AA XCDF AA XCDF AA Pressure developing low profile inline fans with hinged swing out motor/impeller panel for periodic inspection and service access Casing shall be manufactured in galvanised sheet metal with 20mm spigot flanges and integral first-fit key hole mounting slots Motor shall be continuously rated two pole of external rotor motor / fan assembly design balanced in two planes to DIN ISO Insulation shall be IP44 Class F with thermal overload protection Bearings shall be lubricated for life. IP44 protection The fan shall be fitted with a terminal box incorporating knock outs and one cable entry gland rated IP44 Must be suitable for 220V-240V Xpelair LoSound C LQTC The unit is to be supplied from the Xpelair LoSound range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref LQTC AA LQTC AA LQTC AA LQTC AA LQTC AA LQTC AA The casing shall be manufactured in galvanised sheet metal with integral keyhole fixing points The casing shall be lined on four sides with 40mm faced attenuation material The unit shall be provided with a removable cover with quick release catches for periodic inspection and cleaning External rotor motor and forward curved centrifugal fan assembly shall be balanced in two planes to DINISO 1940 The motor shall be maintenance free with sealed for life bearings, and integral thermal overload protection The IP44 Class F capacitor start and run motor shall be rated for continuous running A 3m three core flexible cord shall be provided with the unit Xpelair CubeX CMAX CBXC The unit is to be supplied from the Xpelair CBXC range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref CBXC280S AA CBXC280S AA CBXC315S AA CBXC315S AA CBXC355S AA CBXC355S AA CBXC400S AA CBXC400S AA Unit casings shall be constructed from galvanised sheet metal using a frameless construction method. The casing shall be double skin with the addition of 40mm of sound attenuating insulation, the casing shall be available with a choice of two spigot sizes for adaption to site ductwork Fan shall he high efficiency backward curved with matched external rotor. The motor shall be fitted with sealed for life bearings and be fitted with Thermal overload protection to the terminal block with full motor protection through an external tripping device Speed control shall be through an optional variable voltage device Centrifugal impeller motor rating IP55 Class F 178

179 Xpelair HiFlo CMAX XSFA The unit is to be supplied from the Xpelair XSFA range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref XSFA AA XSFA AA XSFA AA XSFA AA XSFA AA XSFA AA XSFA AA XSFA AA XSFA AA Unit casings shall be manufactured from best quality galvanised sheet steel with access from top or bottom Reinforced slotted safety fixing points shall be incorporated to facilitate drop-rods or mounting bolts within overall unit width All permanent fixings shall be rivetted and all removable items shall be retained via setscrews and nutserts Acoustic insulation shall be self adhesive foam construction meeting Class 0 rating to BS476 Parts 6 and 7 to minimise noise breakout Fans shall be single-inlet, single width, or double-inlet, double-width, centrifugal type with high efficiency, low noise, forwardcurved, multiblade galvanised sheet steel impellers housed within galvanised steel scrolls Motor/impeller assemblies shall be statically and dynamically balanced, in two planes, in accordance with BS 5265, Part 1, 1979 to G2.5 Fans shall be mounted individually onto fan decks to facilitate easy removal Motors shall be totally enclosed, highefficiency, split-capacitor type with power factors of better than 0.9. Maximum ambient operating temp. 40 C Bearings shall be sealed-for-life, maintenance-free, ball bearing type with a minimum life expectancy of 50,000 hours under design operating conditions Insulation shall be to Class B or F with enclosure to IP44 The fan shall be fully speed controllable using the appropriate optional electronic speed controller or 5 step auto transformer Single fan unit Must be suitable for 220V-240V Xpelair ManCoolers The unit is to be supplied from the Xpelair ManCooler range by Applied Energy Products Ltd. Morley Way, Peterborough PE2 9JJ. Tel. +44 (0) Model Ref ManCooler MC AA MC AA MC V 92309AA MC AA MC AA Trapeze TP AA The floor standing units shall be supplied complete with robust tubular stand for fast set up on site The casing shall be adjustable and capable of being locked at the desired angle of operation The motor shall be totally enclosed with maintenance free sealed for life bearings and safety thermal overload protection The impeller shall comprise of a central hub with fully adjustable high performance blades aerofoil blades Finger guards to DIN24167 (UNE ) shall be fitted to each end of the casing with bolted fixings The terminal box shall be no less than IP55 The Trapeze model shall additionally be available for suspension at high level using four steel suspension eyes provided Xpelair Typical Specification

180 Xpelair Wiring Diagrams Xpelair Premier DX180 & DX180T/H Premier DX180 Premier DX180T/H Xpelair Premier DX200 & DX200T Premier DX200 Premier DX200T Xpelair Premier CF20 & CF20T Premier CF20 Premier CF20T Xpelair Premier LoVolt DX200 & LoVolt CF20 Premier LoVolt DX200T Premier LoVolt CF20 Premier LoVolt CF20T Xpelair Premier LVCF20T DC Premier LVCF20T CF20 DC Diagram 1 Use for intermittent ventilation of bathrooms, continuous ventilation of bathrooms, utility rooms and WCs Diagram 2 Use for continuous ventilation of kitchens Diagram 3 Use for intermittent ventilation of WCs Premier CF20 LVCF20T DC Premier CF20 LVCF20T DC 180

181 Xpelair Premier CF20T/40T CV Diagram 1 Use for intermittent ventilation of kitchens, utility rooms and bathrooms Diagram 2 Use for intermittent ventilation of internal rooms Diagram 3 Use for intermittent ventilation of sanitary rooms Xpelair DX100 & XX100 DX100/PC/HP/PIR/XX100/P DX100T/H/XX100T Xpelair LoVolt LV100 LV100/PC/H/HP/PIR LV100T Xpelair Slimline SL100, SL100P & SL100T/HT Slimline SL100 Slimline SL100P Slimline SL100T/HT Xpelair CentrX CentrX CT100/100+/100+P CentrX CT100T/HT/100+HT Xpelair Wiring Diagrams

182 Xpelair Wiring Diagrams Xpelair XIL Inline shower fan systems XIL100/125/150/XXS100 XIL100T/125T/150T/XXS100T Xpelair BriteX LoVolt & BriteX Turbo BX100W/C/BX100+W/C BX100WT/CT/BX100+WT/CT Xpelair XIM XIM100 XIM100T XIM150/200/100+/125 XIM150T/XIM150+T Xpelair Slimline 150 Slimline SL150 Slimline SL150P Slimline SL150HT 182

183 Xpelair GX6, GXC6 & GXC9 GX6 GXC6, GXC6T, GXC6SC & GXC9 Xpelair Premier DX400 & CF40 DX400 DX400PC DX400T/CF40/CF40TD DX400RS/CF40RSTD Xpelair Nouvelle Cuisine Xpelair CX10 & CMF Kitchen Canopies CX10/CMF Xpelair Xplus Xplus275/340 Xplus275/340 with 3 speed switch Xpelair Wiring Diagrams

184 Xpelair Wiring Diagrams Xpelair Xplus 250 & 400 DC 8CV Xplus250/400 Xplus250/400 with 3 speed switch Xpelair Xcell 150 Longlife Xcell 150 Xpelair Xcell 200 Longlife Xcell 200 Xcell 200BP 184

185 Xpelair Xcell 270 Longlife Xcell 270 Xpelair Xcell 300 & 400 Longlife Xcell 300/400 Xpelair Xcell 600 Longlife Xcell 600 Xcell 600BP Xpelair EverDri LongLife EverDri XEDW/XEDL Xpelair LoVolt XHR150 XHR Xpelair Wiring Diagrams

186 Xpelair Wiring Diagrams Xpelair GX6, GX9 & GX12 GX6 GX9/GX12 Xpelair PX6, PX9 & PX12 PX6 PX9/PX12 Xpelair RX6, RX9 & RX12 RX6 RX9/RX12 Xpelair WX6, WX9 & WX12 WX6 WX6T WX9/WX12 186

187 Xpelair ChefX ChefX Tempo/Presto/Mezzo Xpelair WH30 & WHP30 WH30 WH30 with HC301 WHP30 with HC301 Xpelair WH60 WH60-single phase WH60-3 phase using a 240V contactor coil WH60-3 phase using a 415V contactor coil Xpelair Wiring Diagrams

188 Xpelair Wiring Diagrams Xpelair ScreenHeat & PlinthHeat PlinthHeat with integral controls PlinthHeat with remote control Xpelair Whispair NWAN Xpelair XPMS, XPMA & XRA 315/350/ / /350/400 with XCW controller 450 with XCW controller 500/630 with XCW controller 188

189 Xpelair XSCS & XSCA Xpelair XMV Single phase 3 phase Xpelair XID & XIDP XID/XIDP XID/XIDP with XIC1 speed controller Xpelair LoSound XSFA XSFA Xpelair Wiring Diagrams

190 Your guide to a successful fan installation We take the air that surrounds us for granted and yet small changes in for example - air purity, temperature, humidity and velocity - can effect our performance and at worst make us ill. Designing a ventilation system can in most cases be easily achieved by following the step by step approach described below. However, if the space or the activity is unusual, call in the experts - Xpelair who will be happy to advise and assist in proposing the most appropriate scheme. Choosing a Ventilation Solution The type of system chosen will be dependant on the application and building layout. A ventilation system requires as even a flow of air across an area as possible. The most cost effective method of achieving this is by extract ventilation with appropriate air replacement provision. In the leisure industry input ventilation is preferred with air escaping from the premises through doors and other available openings. Many schemes use both extract and intake fans which are often connected to a single control system. For fully automatic operation, a range of sensors are available which will switch On immediately when required but only when necessary for energy efficiency. 1. Calculate room volume Take measurements in metres. Multiply: Length x Width x Height = Room m 3. Example: A domestic kitchen 3m x 2.5m x 2.4m = 18m 3 2. Calculate performance requirement Multiply room volume by the number of air changes appropriate to the room type from the guide table opposite. Example continued: Recommended Air Changes Per Hour for domestic kitchens is 10 to m 3 x 10 ACH - 180m 3 /h, 18m 3 x 15 ACH = 270m 3 /h. Therefore a fan with an extract performance between m 3 is appropriate. NOTE: it is always better to pick a fan at the higher end of the range rather than risk unsatisfactory ventilation. 3. Select your fans from the product extract performance table opposite Example continued: selection might be a GX6 product: 266m 3 /h, DX400 or CF40: 245m 3 /h or a Kitchen canopy: 350m 3 /h. Further Considerations Window, wall, ceiling or roof? For effective operation the extract point should be as far away from the source of air replacement - usually the door, and as close to the source of condensation or smells as possible. This usually determines the type of fan (window, wall etc.) If the room has no opening windows then a model fitted with an overrun timer will meet the requirements of the building regulations. For automatic control choose from the convenience of an optional Xpelair humidity or PIR sensor. Air Replacement A tight fitting door can prevent a fan from receiving adequate air replacement. A suitable gap between the underside of the door and the floor finish is usually adequate for toilets and bathrooms although Xpelair Slimline privacy air transfer grilles are available. For larger extract volumes air replacement should be carefully considered particularly in tightly sealed properties. Fuel Burning Appliances Where a fuel appliance is fitted with a non balanced flue, adequate air replacement must be provided to prevent fumes being drawn down the flue when the fan is operating at its maximum performance. Refer to Building Regulations for specific requirements. Exhaust air must not be discharged into a flue used for exhausting fumes from applications supplied with energy other than electricity. Intake fans or air replacement grilles should be sited well away from the flue to ensure that gases are not reintroduced into the building. See Building Regulations. Splash Areas An electrical product in a bathroom or showeroom must be situated in accordance with IEE zoning requirements. For additional safety Xpelair LoVolt SELV products operating at 12 volts should be considered. General When determining the method of ventilation and flow rates the requirements of all authorities concerned must be observed. 190

191 Air change requirements Product Extract Performance Situation Air changes per hour (ach) Assembly Rooms* 6-10 Bakeries* Banks/Building Societies* 6 Banquet Halls* Bathrooms 6-8 Bedrooms 2-4 Billiard Rooms 6-8 Boiler Rooms* Cafés and Coffee Bars* Canteens* 8-12 Cellars 3-10 Churches 1-3 Cinemas and Theatres* 6-10 Club Rooms 8-10 Compressor Rooms Conference Rooms* 6-10 Dairies 8-10 Dance Halls 12 Dye Works Electroplating Shops Engine Rooms* Entrance Halls, Corridors 3-5 Factories and Workshops 6-10 Foundries Garages* 6-10 Glass houses* Gymnasiums 6 Hairdressing Salons Hospitals - Sterilising Wards* DHSS Guidance Hotel Bars 6-10 Kitchens - Hotel or Industrial* DWIT Kitchens - Domestic Laboratories* 4-15 Launderettes Laundries* Lecture Theatres* 6-10 Libraries* 3-4 Living Rooms 4-6 Mushroom Houses 6-10 Offices* 4-6 Photo and X-ray Darkrooms* 6-8 Public House Bars Recording Studios Restaurants* Schoolrooms* Building Bulletin l/s/person Shops and Supermarkets 8-10 Shower/Bathrooms Stores and Warehouses 3-6 Squash Courts 4-6 Toilets (Public)* 5 min / 6 l/s/pan Toilets (Domestic) 6-10 Utility Rooms Welding Shops (General Extract) *Taken from CIBSE Guide, B2:2001 with their kind permission Product Extract Performance (m 3 /h) min max DX180, DX200 & CF LVDX200 & LVCF DX100 & XX LV SL100 & SL CT100 & CT XIL & XXS BriteX LoVolt & Turbo XIM GX6, GXC6 & GXC DX400 & CF Nouvelle Cuisine CX10 & CMF Xplus Xcell Xcell 300 & EverDri XRH GX6, GX9 & GX WX6, WX9 & WX PX6, PX9 & PX RX6, RX9 & RX ChefX Product Extract Performance (m 3 /s) min max XPMA/XPMS XSCA XRMA XMV XDRA Twin XID XIDP XSFA XDFA Twin Airflow Performance Product Airflow (m 3 /h) min max Digitemp WH30, WH60, WHP30 & DCH3000A ScreenHeat & PlinthHeat SweepFan Electrostatic Air Cleaners DigiPure Product Airflow (m 3 /s) min max ManCoolers Your guide to a successful fan installation

192 Service and Design Solutions When buying Xpelair products, you already know that they will be of the highest quality and will provide many years of trouble-free operation. However, for peace of mind, Xpelair s after sales service is second to none. Products are covered by a full parts and labour guarantee from the date of purchase, so should the product become faulty within the guarantee period, it will be repaired by our dedicated service engineers, totally free of charge. As market leader, Xpelair prides itself on engineering excellence and the range of services offered to customers - Subject to the terms of Xpelair s guarantee. Application Design A design service is available to customers wishing to use Xpelair products in their building projects. Design work can be carried out from scaled architect s plans (1:500 min) construction and insulation data of the property, ventilation requirements etc. should be supplied with any request for design work. Consultation to select the optimum design and product specification of the job Designs that meet both building and health & safety regulations where required Sizing and selection of products to your own or national specification requirements Estimated operating and equipment costs Tel: Fax: Technical Services Our Technical Services Call Centre is staffed by a team trained in diagnosing and rectifying potential concerns over the phone, whether or not the product you have purchased is in guarantee. If for any reason they are unable to solve the problem by phone, they will brief an engineer, prior to the visit, to ensure that wherever possible, the problem is fixed first time. The team also provides advice on application, installation and operation, ensuring that the customer receives the full benefit from purchasing an Xpelair product. Tel: Fax: Spares Regular maintenance and servicing of Xpelair products is recommended to ensure the longevity of your Xpelair product. From time to time it may be necessary to replace components to extend the life of the product. Xpelair provide a wide range of spare parts covering current and previous products, making maintenance simple and effective. Tel: Export Xpelair is a great British brand in every sense of the word but for many years it has been a world leader in the ventilation and air quality markets with sales in excess of fifty countries world-wide. Xpelair has achieved this by taking into consideration global market requirements and ensuring products are developed to meet these needs, as well as developing products for specific countries and regions, taking into consideration approvals, electrical supply and climate. Tel: +44(0) Fax: +44(0)